X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=5bb55ebf382d60a5516ea8c11e8e4973e61373d3;hp=2e40bd74075c77850b8ed8f95b52edb0b83accd3;hb=4e5c0d12f951f294937b57f2f3ff9be64748778e;hpb=7fc80d44841dbc1f1b68d75312ab7ec9e6d63613
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 2e40bd7407..1edb49afbd 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -1,19 +1,16 @@
-## @file MdeModulePkg.dec
-#
-# This package provides the modules that conform to EFI/PI Industry standards.
-# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
+## @file MdeModulePkg.dec
+# This package provides the modules that conform to UEFI/PI Industry standards.
+# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
-# Copyright (c) 2007 - 2008, Intel Corporation.
-#
-# All rights reserved.
-# This program and the accompanying materials are licensed and made available under
-# the terms and conditions of the BSD License which accompanies this distribution.
+# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.
+# This program and the accompanying materials are licensed and made available under
+# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
@@ -21,491 +18,1289 @@
[Defines]
DEC_SPECIFICATION = 0x00010005
PACKAGE_NAME = MdeModulePkg
+ PACKAGE_UNI_FILE = MdeModulePkg.uni
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288
- PACKAGE_VERSION = 0.1
+ PACKAGE_VERSION = 0.96
-[Includes.common]
+[Includes]
Include
-[LibraryClasses.common]
+[LibraryClasses]
## @libraryclass IpIo layer upon EFI IP4 Protocol.
+ # This library is only intended to be used by UEFI network stack modules.
IpIoLib|Include/Library/IpIoLib.h
-
+
## @libraryclass Basic function for UEFI network stack.
+ # This library is only intended to be used by UEFI network stack modules.
NetLib|Include/Library/NetLib.h
- ## @libraryclass Defines a set of methods to reset whole system.
- ResetSystemLib|Include/Library/ResetSystemLib.h
-
## @libraryclass The helper routines to access UDP service.
+ # This library is only intended to be used by UEFI network stack modules.
UdpIoLib|Include/Library/UdpIoLib.h
-
+
+ ## @libraryclass The helper routines to access TCP service.
+ # This library is only intended to be used by UEFI network stack modules.
+ TcpIoLib|Include/Library/TcpIoLib.h
+
+ ## @libraryclass Defines a set of methods to reset whole system.
+ ResetSystemLib|Include/Library/ResetSystemLib.h
+
## @libraryclass Defines a set of methods related do S3 mode.
+ # This library class is no longer used and modules using this library should
+ # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
S3Lib|Include/Library/S3Lib.h
-
+
## @libraryclass Defines a set of methods related recovery mode.
+ # This library class is no longer used and modules using this library should
+ # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
RecoveryLib|Include/Library/RecoveryLib.h
-
- ## @libraryclass Basic platform driver override functions.
- PlatformDriverOverrideLib|Include/Library/PlatformDriverOverrideLib.h
## @libraryclass Provides HII related functions.
HiiLib|Include/Library/HiiLib.h
- ## @libraryclass Provides a set of interfaces to do IFR opcode creation and interact with a UEFI Form Browser.
- IfrSupportLib|Include/Library/IfrSupportLib.h
-
- ## @libraryclass Includes two extended HII functions to create and destory Hii Package
- # by create the virtual Driver Handle.
- ##
- ExtendedHiiLib|Include/Library/ExtendedHiiLib.h
-
- ## @libraryclass Defines APIs that is related to IFR operations but specific to EDK II
- # implementation.
- ##
- ExtendedIfrSupportLib|Include/Library/ExtendedIfrSupportLib.h
-
## @libraryclass Defines a set of interfaces on how to process capusle image update.
CapsuleLib|Include/Library/CapsuleLib.h
-
+
## @libraryclass Library for Deferred Procedure Calls.
DpcLib|Include/Library/DpcLib.h
- ## @libraryclass Provides all FVB runtime services defined in PI specification FVB protocol to provide
- # low level control interfaces over block-oriented firmware devices.
- ##
- FvbServiceLib|Include/Library/FvbServiceLib.h
+ ## @libraryclass Provides global variables that are pointers
+ # to the UEFI HII related protocols.
+ #
+ UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h
+
+ ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
+ #
+ SecurityManagementLib|Include/Library/SecurityManagementLib.h
+
+ ## @libraryclass OEM status code libary is used to report status code to OEM device.
+ #
+ OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h
+
+ ## @libraryclass Debug Agent is used to provide soft debug capability.
+ #
+ DebugAgentLib|Include/Library/DebugAgentLib.h
+
+ ## @libraryclass Provide platform specific hooks.
+ #
+ PlatformHookLib|Include/Library/PlatformHookLib.h
+
+ ## @libraryclass Provide platform specific hooks for SMM core.
+ #
+ SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h
+
+ ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
+ #
+ LockBoxLib|Include/Library/LockBoxLib.h
+
+ ## @libraryclass Provide the CPU exception handler.
+ #
+ CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
+
+ ## @libraryclass Provides platform specific display interface.
+ #
+ CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
- ## @libraryclass Provides APIs for system memory test.
- ##
- MemoryTestLib|Include/Library/BaseMemoryTestLib.h
+ ## @libraryclass Provides sorting functions
+ SortLib|Include/Library/SortLib.h
-[Guids.common]
+[Guids]
## MdeModule package token space guid
- ## Include/Guid/MdeModulePkgTokenSpace.h
+ # Include/Guid/MdeModulePkgTokenSpace.h
gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}
## Hob guid for Pcd DataBase
- ## Include/Guid/PcdDataBaseHobGuid.h
+ # Include/Guid/PcdDataBaseHobGuid.h
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}
-
+
+ ## Guid for PCD DataBase signature.
+ # Include/Guid/PcdDataBaseSignatureGuid.h
+ gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}
+
## Guid for EDKII implementation GUIDed opcodes
+ # Include/Guid/MdeModuleHii.h
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}
-
+
## Guid for Framework vfr GUIDed opcodes.
+ # Include/Guid/MdeModuleHii.h
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}
-
+
## Guid to specify the System Non Volatile FV
- ## Include/Guid/SystemNvDataGuid.h
+ # Include/Guid/SystemNvDataGuid.h
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
-
- ## Alternate Firmware Volume Block Guid specify that the additional
- # FVB protocol is installed into FVB handle
- ## Include/Guid/AlternateFvBlock.h
- gEfiAlternateFvBlockGuid = { 0xF496922D, 0x172F, 0x4BBC, { 0xA1, 0xEB, 0x0E, 0xEB, 0x94, 0x9C, 0x34, 0x86 }}
-
+
+ ## GUID used as the signature of FTW working block header.
+ # Include/Guid/SystemNvDataGuid.h
+ gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
+
+ ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
+ # Include/Guid/FaultTolerantWrite.h
+ gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
+
## Guid specify the device is the console out device.
- ## Include/Guid/ConsoleOutDevice.h
+ # Include/Guid/ConsoleOutDevice.h
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
## Guid specify the device is the console in device.
- ## Include/Guid/ConsoleInDevice.h
+ # Include/Guid/ConsoleInDevice.h
gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
-
- ## Guid specify the primary console out device.
- ## Include/Guid/PrimaryConsoleOutDevice.h
- gEfiPrimaryConsoleOutDeviceGuid = { 0x62BDF38A, 0xE3D5, 0x492C, { 0x95, 0x0C, 0x23, 0xA7, 0xF6, 0x6E, 0x67, 0x2E }}
-
- ## Guid specify the primary console in device.
- ## Include/Guid/PrimaryConsoleInDevice.h
- gEfiPrimaryConsoleInDeviceGuid = { 0xE451DCBE, 0x96A1, 0x4729, { 0xA5, 0xCF, 0x6B, 0x9C, 0x2C, 0xFF, 0x47, 0xFD }}
-
- ## Guid specify the primary StdErr device.
- ## Include/Guid/PrimaryStandardErrorDevice.h
- gEfiPrimaryStandardErrorDeviceGuid = { 0x5A68191B, 0x9B97, 0x4752, { 0x99, 0x46, 0xE3, 0x6A, 0x5D, 0xA9, 0x42, 0xB1 }}
-
- ## Guid specify the default BMP logo file.
- ## Include/Guid/Bmp.h
- gEfiDefaultBmpLogoGuid = { 0x7BB28B99, 0x61BB, 0x11D5, { 0x9A, 0x5D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
-
- ## Variale guid specify boot state.
- ## Include/Guid/BootState.h
- gEfiBootStateGuid = { 0x60B5E939, 0x0FCF, 0x4227, { 0xBA, 0x83, 0x6B, 0xBE, 0xD4, 0x5B, 0xC0, 0xE3 }}
-
+
## Hob and Variable guid specify the platform memory type information.
- ## Include/Guid/MemoryTypeInformation.h
+ # Include/Guid/MemoryTypeInformation.h
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}
-
+
## Capsule update hob and variable guid
- ## Include/Guid/CapsuleVendor.h
+ # Include/Guid/CapsuleVendor.h
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}
-
- ## Guid specify the Shell application.
- ## Include/Guid/ShellFile.h
- gEfiShellFileGuid = { 0xC57AD6B7, 0x0515, 0x40A8, { 0x9D, 0x21, 0x55, 0x16, 0x52, 0x85, 0x4E, 0x37 }}
-
+
## Guid specifiy the device is the StdErr device.
- ## Include/Guid/StandardErrorDevice.h
+ # Include/Guid/StandardErrorDevice.h
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
-
- ## PeCoffLoader guid for PeCoffLoader entry in the HOB list.
- ## Include/Guid/PeiPeCoffLoader.h
- gEfiPeiPeCoffLoaderGuid = { 0xD8117CFF, 0x94A6, 0x11D4, { 0x9A, 0x3A, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
-
- ## Guid specify the variable list entries put in the EFI system table.
- ## Include/Guid/VariableInfo.h
- gEfiVariableInfoGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
-
- ## Platform Override Variable guid
- ## Include/Guid/OverrideVariable.h
- gEfiOverrideVariableGuid = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }}
+
+ ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.
+ # Include/Guid/VariableFormat.h
+ gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
+
+ # Include/Guid/VariableIndexTable.h
+ gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
+
+ ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
+ # Include/Guid/SmmVariableCommon.h
+ gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
- ## Include/Guid/Performance.h
- gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}
+ # Include/Guid/Performance.h
+ gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
+ gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
+ gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
+ gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
## Guid is defined for CRC32 encapsulation scheme.
- ## Include/Guid/Crc32GuidedSectionExtraction.h
+ # Include/Guid/Crc32GuidedSectionExtraction.h
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
-[Protocols.common]
- ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
- ## Include/Protocol/LoadPe32Image.h
- gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
-
- ## Print protocol defines six basic print functions to print the format unicode and ascii string.
- ## Include/Protocol/Print2.h
- gEfiPrint2ProtocolGuid = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}
+ ## Include/Guid/NicIp4ConfigNvData.h
+ gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
- ## This protocol defines the generic memory test interfaces in Dxe phase.
- ## Include/Protocol/GenericMemoryTest.h
- gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
+ ## Include/Guid/StatusCodeCallbackGuid.h
+ gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
- ## Fault tolerant write lite protocol defines only one interface to write
- # the buffer to the fault tolerant storage.
- ## Include/Protocol/FaultTolerantWriteLite.h
- gEfiFaultTolerantWriteLiteProtocolGuid = { 0x3F557189, 0x8DAE, 0x45AE, { 0xA0, 0xB3, 0x2B, 0x99, 0xCA, 0x7A, 0xA7, 0xA0 }}
-
- ## This protocol provides the interfaces to Get/Set the current video mode for GOP/UGA screen
- ## Include/Protocol/ConsoleControl.h
- gEfiConsoleControlProtocolGuid = { 0xF42F7782, 0x012E, 0x4C12, { 0x99, 0x56, 0x49, 0xF9, 0x43, 0x04, 0xF7, 0x21 }}
-
- ## OEM Badging Protocol defines the interface to get the OEM badging image with the dispaly attribute.
- ## Include/Protocol/OEMBadging.h
- gEfiOEMBadgingProtocolGuid = { 0x170E13C0, 0xBF1B, 0x4218, { 0x87, 0x1D, 0x2A, 0xBD, 0xC6, 0xF8, 0x87, 0xBC }}
-
- ## Include/Protocol/NicIp4Config.h
- gEfiNicIp4ConfigProtocolGuid = {0xdca3d4d, 0x12da, 0x4728, { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 }}
-
- ## Include/Protocol/NicIp4Config.h
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
+ ## GUID identifies status code records HOB that originate from the PEI status code
+ # Include/Guid/MemoryStatusCodeRecord.h
+ gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}
+
+ ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI
+ # Include/Guid/StatusCodeDataTypeDebug.h
+ gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
+
+ ## A configuration Table Guid for Load module at fixed address
+ # Include/Guid/LoadModuleAtFixedAddress.h
+ gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
+
+ ## GUID used to store the global debug mask value into an EFI Variable
+ # Include/Guid/DebugMask.h
+ gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
- ## Include/Protocol/Tcp.h
- gEfiTcpProtocolGuid = {0x02b3d5f2, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d }}
+ ## Event for the DXE Core to signal idle events
+ # Include/Guid/EventIdle.h
+ gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
+
+ ## Include/Guid/RecoveryDevice.h
+ gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}
+
+ ## Include/Guid/RecoveryDevice.h
+ gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}
+
+ ## Include/Guid/RecoveryDevice.h
+ gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}
+
+ ## Include/Guid/RecoveryDevice.h
+ gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
+
+ ## Include/Guid/SmmLockBox.h
+ gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
+
+ ## Include/Guid/AcpiS3Context.h
+ gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}
+
+ ## Include/Guid/AcpiS3Context.h
+ gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}
+
+ ## Include/Guid/BootScriptExecutorVariable.h
+ gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}
+ gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}
+
+ ## Include/Guid/UsbKeyBoardLayout.h
+ gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
+ gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
- ## Include/Protocol/PxeDhcp4CallBack.h
- gEfiPxeDhcp4CallbackProtocolGuid = {0xc1544c01, 0x92a4, 0x4198, {0x8a, 0x84, 0x77, 0x85, 0x83, 0xc2, 0x36, 0x21 }}
+ ## Include/Guid/HiiResourceSampleHii.h
+ gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
+
+ ## Include/Guid/DriverSampleHii.h
+ gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}
+ gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}
+ gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}
+
+ ## Include/Guid/PlatDriOverrideHii.h
+ gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
+
+ ## Include/Guid/Ip4ConfigHii.h
+ gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}
+
+ ## Include/Guid/VlanConfigHii.h
+ gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
+
+ ## Include/Guid/Ip4IScsiConfigHii.h
+ gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
+ gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
+
+ ## Include/Guid/ZeroGuid.h
+ gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
- ## Include/Protocol/PxeDhcp4.h
- gEfiPxeDhcp4ProtocolGuid = {0x03c4e624, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x29, 0x3f, 0xc1, 0x4d }}
+ ## Include/Guid/MtcVendor.h
+ gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
+
+ ## Guid for Firmware Performance Data Table (FPDT) implementation.
+ # Include/Guid/FirmwarePerformance.h
+ gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
+ gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
+
+ ## Include/Guid/ExitBootServiceFailed.h
+ gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
+
+ ## Include/Guid/ConnectConInEvent.h
+ gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
+
+ ## Include/Guid/StatusCodeDataTypeVariable.h
+ gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
+ ## Include/Guid/MemoryProfile.h
+ gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
+
+ ## Include/Protocol/VarErrorFlag.h
+ gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }
+
+ ## GUID indicates the LZMA custom compress/decompress algorithm.
+ # Include/Guid/LzmaDecompress.h
+ gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
+ gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
+
+[Ppis]
+ ## Include/Ppi/AtaController.h
+ gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
+
+ ## Include/Ppi/UsbHostController.h
+ gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}
+
+ ## Include/Ppi/Usb2HostController.h
+ gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}
+
+ ## Include/Ppi/UsbController.h
+ gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}
+
+ ## Include/Ppi/UsbIo.h
+ gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
+
+ ## Include/Ppi/Capsule.h
+ gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
+
+ ## Include/Ppi/SecPerformance.h
+ gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
+
+ ## Include/Ppi/SmmCommunication.h
+ gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}
+
+ ## Include/Ppi/SmmAccess.h
+ gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}
+
+ ## Include/Ppi/SmmControl.h
+ gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}
+
+ ## Include/Ppi/PostBootScriptTable.h
+ gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}
+
+ ## Include/Ppi/SerialPortPei.h
+ gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}
+
+ ## Include/Ppi/UfsHostController.h
+ gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
+
+[Protocols]
+ ## Load File protocol provides capability to load and unload EFI image into memory and execute it.
+ # Include/Protocol/LoadPe32Image.h
+ # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.
+ # If developer need implement such functionality, they should use BasePeCoffLib.
+ gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}
+
+ ## Print protocol defines basic print functions to print the format unicode and ascii string.
+ # Include/Protocol/Print2.h
+ gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }
+
+ ## This protocol defines the generic memory test interfaces in Dxe phase.
+ # Include/Protocol/GenericMemoryTest.h
+ gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}
+
## Include/Protocol/Dpc.h
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
-
- ## Tcg addtional services to measure PeImage and ActionString.
- ## Include/Protocol/TcgPlatform.h
- gEfiTcgPlatformProtocolGuid = { 0x8c4c9a41, 0xbf56, 0x4627, { 0x9e, 0xa, 0xc8, 0x38, 0x6d, 0x66, 0x11, 0x5c }}
-
- ## Protocol Guid specify the device is the hot plug device.
- gEfiHotPlugDeviceGuid = { 0x220AC432, 0x1D43, 0x49E5, { 0xA7, 0x4F, 0x4C, 0x9D, 0xA6, 0x7A, 0xD2, 0x3B }}
-[PcdsFeatureFlag.common]
- ## Indicate whether platform can support update capsule across a system reset
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
-
- ## This feature flag can be used to enable or disable the Pcd PEIM database
- # traverse capability. Disable it can reduce the size of final image generated.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseTraverseEnabled|TRUE|BOOLEAN|0x00010020
-
- ## This feature flag can be used to enable or disable the Pcd DXE database
- # traverse capability. Disable it can reduce the size of final image generated.
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxePcdDatabaseTraverseEnabled|TRUE|BOOLEAN|0x00010021
+ ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
+ # Include/Protocol/FaultTolerantWrite.h
+ gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
+
+ ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
+ # Include/Protocol/SmmFaultTolerantWrite.h
+ gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
- ## This feature flag can be used to enable or disable the SET capability of PCD service PEIM.
- # If a platform does not do PCD SET operation in PEI phase. This flag can be set to DISABLE to save size.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseSetEnabled|TRUE|BOOLEAN|0x00010030
+ ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
+ # Include/Protocol/SwapAddressRange.h
+ gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
- ## This feature flag can be used to enable or disable the GET size capability of PCD service PEIM.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseGetSizeEnabled|TRUE|BOOLEAN|0x00010031
+ ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
+ # Include/Protocol/SmmSwapAddressRange.h
+ gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
- ## This feature flag can be used to enable or disable the Callback On SET capability of PCD service PEIM.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseCallbackOnSetEnabled|TRUE|BOOLEAN|0x00010032
+ ## This protocol is intended for use as a means to store data in the EFI SMM environment.
+ # Include/Protocol/SmmVariableProtocol.h
+ gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
+
+ ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
+ # Include/Protocol/VariableLock.h
+ gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
+
+ ## Include/Protocol/VarCheck.h
+ gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }
+
+ ## Include/Protocol/SmmVarCheck.h
+ gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }
+
+ ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
+ # Include/Protocol/SmmFirmwareVolumeBlock.h
+ gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
+
+ ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
+ # Include/Guid/DebugMask.h
+ gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
+
+ ## Include/Protocol/LockBox.h
+ gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
- ## This feature flag can be used to enable or disable the PCD service PEIM to handle DynamicEX PCD.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseExEnabled|TRUE|BOOLEAN|0x00010033
-
- ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.
- # It can be disabled to save size.
+ ## Include/Protocol/FormBrowserEx.h
+ gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
+
+ ## Include/Protocol/EbcVmTest.h
+ gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }
+
+ ## Include/Protocol/EbcSimpleDebugger.h
+ gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }
+
+ ## Include/Protocol/BootLogo.h
+ gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
+
+ ## Include/Protocol/DisplayProtocol.h
+ gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
+
+ ## Include/Protocol/FormBrowserEx2.h
+ gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }
+
+ ## Include/Protocol/UfsHostController.h
+ gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
+
+#
+# [Error.gEfiMdeModulePkgTokenSpaceGuid]
+# 0x80000001 | Invalid value provided.
+# 0x80000002 | Reserved bits must be set to zero.
+# 0x80000003 | Incorrect progress code provided.
+# 0x80000004 | Invalid foreground color specified.
+# 0x80000005 | Invalid background color specified.
+# 0x80000006 | Incorrect error code provided.
+#
+
+[PcdsFeatureFlag]
+ ## Indicates if the platform can support update capsule across a system reset.
+ # TRUE - Supports update capsule across a system reset.
+ # FALSE - Does not support update capsule across a system reset.
+ # @Prompt Enable update capsule across a system reset.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
+
+ ## Indicates if all PCD PPI services will be enabled.
+ # TRUE - All PCD PPI services will be produced.
+ # FALSE - Minimal PCD PPI services (only GetService) will be produced.
+ # @Prompt Enable full PEI PCD services.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020
+
+ ## Indicates if the Device Path To Text Protocol should be produced by the platform.
+ # It can be disabled to save size.
+ # TRUE - Device Path To Text Protocol will be produced.
+ # FALSE - Device Path To Text Protocol will not be produced.
+ # @Prompt Enable Device Path to Text support.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037
-
- ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.
- # It can be disabled to save size.
+
+ ## Indicates if the Device Path From Text Protocol should be produced by the platform.
+ # It can be disabled to save size.
+ # TRUE - Device Path From Text Protocol will be produced.
+ # FALSE - Device Path From Text Protocol will not be produced.
+ # @Prompt Enable Device Path From Text support.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
-
- ## If this PCD is set as TRUE, the code specific to NT emulator will be enabled.
- gEfiMdeModulePkgTokenSpaceGuid.PcdNtEmulatorEnable|FALSE|BOOLEAN|0x0001003e
-
- ## If TRUE, track statistical information about variable usage stored in the EFI system table.
+
+ ## Indicates if the statistics about variable usage will be collected. This information is
+ # stored as a vendor configuration table into the EFI system table.
+ # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
+ # variable usage info. VariableInfo application will not output information if not set to TRUE.
+ # TRUE - Statistics about variable usage will be collected.
+ # FALSE - Statistics about variable usage will not be collected.
+ # @Prompt Enable variable statistics collection.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f
-
- ## If TRUE, Unicode Collation Protocol will be installed.
+
+ ## Indicates if Unicode Collation Protocol will be installed.
+ # TRUE - Installs Unicode Collation Protocol.
+ # FALSE - Does not install Unicode Collation Protocol.
+ # @Prompt Enable Unicode Collation support.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040
-
- ## If TRUE, Unicode Collation 2 Protocol will be installed.
+
+ ## Indicates if Unicode Collation 2 Protocol will be installed.
+ # TRUE - Installs Unicode Collation 2 Protocol.
+ # FALSE - Does not install Unicode Collation 2 Protocol.
+ # @Prompt Enable Unicode Collation 2 support.
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041
-
- ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
- # It could be set FALSE to save size.
+
+ ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
+ # It could be set FALSE to save size.
+ # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.
+ # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.
+ # @Prompt Enable ConOut GOP support.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042
-
- ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
- # It could be set FALSE to save size.
+
+ ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.
+ # It could be set FALSE to save size.
+ # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.
+ # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.
+ # @Prompt Enable ConOut UGA support.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043
-
- ## If TRUE, TE image will first be searched in PeiCore dispatcher.
- # If FALSE, PE image will first be searched.
+
+ ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.
+ # This PCD is used to tune PEI phase performance to reduce the search image time.
+ # It can be set according to the generated image section type.
+ # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.
+ # FALSE - PeiCore will first search PE section from PEIM to load the image.
+ # @Prompt PeiCore search TE section first.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044
-
- ## If PcdSupportHardwareErrorRecord is TRUE, support hardware error record via variable in BDS.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHardwareErrorRecord|FALSE|BOOLEAN|0x00010045
-
- ## If TRUE, Robustnesss improvement such as for DUET. Default is not required.
- gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
- ## If TRUE, HiiImageProtocol will be installed.
- # FALSE is for size reduction.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
-
- ## If TRUE, Full UEFI Config Routing Protocol will be installed.
- # FALSE is for size reduction.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportFullConfigRoutingProtocol|TRUE|BOOLEAN|0x00010101
+ ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI
+ # interrupt to access usb device in the case of absence of usb stack.
+ # DUET platform requires the token to be TRUE.
+ # TRUE - Turn off usb legacy support.
+ # FALSE - Does not turn off usb legacy support.
+ # @Prompt Turn off USB legacy support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
- ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.
+ ## Indicates if HiiImageProtocol will be installed.
+ # FALSE is for size reduction.
+ # TRUE - Installs HiiImageProtocol.
+ # FALSE - Does not install HiiImageProtocol.
+ # @Prompt Enable HII image support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
+
+ ## Indicates if USB KeyBoard Driver disables the default keyboard layout.
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved
- # from HII database.
+ # from HII database.
+ # TRUE - USB KeyBoard Driver will disable the default keyboard layout.
+ # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.
+ # @Prompt Disable default keyboard layout in USB KeyBoard Driver.
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
- ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
- # This is used to provide backward compatibility support to Framework HII module built togehter EdkCompatbilityPkg.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkHiiCompatibilitySupport|TRUE|BOOLEAN|0x00012008
-
- ## If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkFvHobCompatibilitySupport|FALSE|BOOLEAN|0x00012009
-
- ##
- # If TRUE, HelloWorld Application will print the verbose information.
- # This PCD is a sample to explain FeatureFlag PCD usage.
- ##
+ ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.
+ # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
+ # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
+ # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
+ # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.
+ # @Prompt Enable framework backward compatibility support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
+
+ ## Indicates if HelloWorld Application will print the verbose information.
+ # This PCD is a sample to explain FeatureFlag PCD usage.
+ # TRUE - HelloWorld Application will print the verbose information.
+ # FALSE - HelloWorld Application will not print the verbose information.
+ # @Prompt Enable HelloWorld print.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a
-[PcdsFixedAtBuild.common]
+ ## Indicates if FULL FTW protocol services (total six APIs) will be produced.
+ # TRUE - Produces FULL FTW protocol services (total six APIs).
+ # FALSE - Only FTW Write service is available.
+ # @Prompt Enable FULL FTW services.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b
+
+ ## Indicates if DXE IPL supports the UEFI decompression algorithm.
+ # TRUE - DXE IPL will support UEFI decompression.
+ # FALSE - DXE IPL will not support UEFI decompression to save space.
+ # @Prompt Enable UEFI decompression support in DXE IPL.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c
+
+ ## Indicates if PciBus driver supports the hot plug device.
+ # TRUE - PciBus driver supports the hot plug device.
+ # FALSE - PciBus driver doesn't support the hot plug device.
+ # @Prompt Enable PciBus hot plug device support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d
+
+ ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
+ # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.
+ # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.
+ # @Prompt Enable PCI bridge IO alignment probe.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
+
+ ## Indicates if StatusCode is reported via Serial port.
+ # TRUE - Reports StatusCode via Serial port.
+ # FALSE - Does not report StatusCode via Serial port.
+ # @Prompt Enable StatusCode via Serial port.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
+
+ ## Indicates if StatusCode is stored in memory.
+ # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
+ # TRUE - Stores StatusCode in memory.
+ # FALSE - Does not store StatusCode in memory.
+ # @Prompt Enable StatusCode via memory.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
+
+ ## Indicates if PEI phase StatusCode will be replayed in DXE phase.
+ # TRUE - Replays PEI phase StatusCode in DXE phased.
+ # FALSE - Does not replay PEI phase StatusCode in DXE phase.
+ # @Prompt Enable PEI StatusCode replay in DXE phase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d
+
+ ## Indicates if ACPI SDT protocol will be installed.
+ # TRUE - Installs ACPI SDT protocol.
+ # FALSE - Does not install ACPI SDT protocol.
+ # @Prompt Enable ACPI SDT support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
+
+ ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
+ # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.
+ # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.
+ # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.
+ # @Prompt Enable unaligned PCI I/O support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
+
+ ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.
+ # TRUE - TEXT statement will always be set to GrayOut.
+ # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
+ # @Prompt Always GrayOut TEXT statement.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
+
+ ## Indicates if unselectable menu should be gray out in HII Form Browser.
+ # TRUE - The unselectable menu will be set to GrayOut.
+ # FALSE - The menu will be show as normal menu entry even if it is not selectable.
+ # @Prompt GrayOut read only menu.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
+
+ ## Indicates if recovery from IDE disk will be supported.
+ # TRUE - Supports recovery from IDE disk.
+ # FALSE - Does not support recovery from IDE disk.
+ # @Prompt Enable recovery on IDE disk.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
+
+ ## Indicates if recovery from FAT floppy disk will be supported.
+ # TRUE - Supports recovery from FAT floppy disk.
+ # FALSE - Does not support recovery from FAT floppy disk.
+ # @Prompt Enable recovery on FAT floppy disk.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061
+
+ ## Indicates if recovery from data CD will be supported.
+ # TRUE - Supports recovery from data CD.
+ # FALSE - Does not support recovery from data CD.
+ # @Prompt Enable recovery on data CD.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062
+
+ ## Indicates if recovery from FAT USB disk will be supported.
+ # TRUE - Supports recovery from USB disk.
+ # FALSE - Does not support recovery from USB disk.
+ # @Prompt Enable recovery on FAT USB disk.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063
+
+ ## Indicates if S3 performance data will be supported in ACPI FPDT table.
+ # TRUE - S3 performance data will be supported in ACPI FPDT table.
+ # FALSE - S3 performance data will not be supported in ACPI FPDT table.
+ # @Prompt Enable S3 performance data support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
+
+[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
+ ## Indicates if DxeIpl should switch to long mode to enter DXE phase.
+ # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
+ # is built in firmware.
+ # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.
+ # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
+ # @Prompt DxeIpl switch to long mode.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
+
+ ## Indicates if DxeIpl should rebuild page tables. This flag only
+ # makes sense in the case where the DxeIpl and the DxeCore are both X64.
+ # TRUE - DxeIpl will rebuild page tables.
+ # FALSE - DxeIpl will not rebuild page tables.
+ # @Prompt DxeIpl rebuild page tables.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c
+
+[PcdsFixedAtBuild]
+ ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.
+ # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.
+ # 0: Disable the feature.
+ # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.
+ # @Prompt Enable LMFA feature.
+ # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
+
+ ## Progress Code for OS Loader LoadImage start.
+ # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000
+ # @Prompt Progress Code for OS Loader LoadImage start.
+ # @ValidList 0x80000003 | 0x03058000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030
+
+ ## Progress Code for OS Loader StartImage start.
+ # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001
+ # @Prompt Progress Code for OS Loader StartImage start.
+ # @ValidList 0x80000003 | 0x03058001
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031
+
+ ## Progress Code for S3 Suspend start.
+ # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000
+ # @Prompt Progress Code for S3 Suspend start.
+ # @ValidList 0x80000003 | 0x03078000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032
+
+ ## Progress Code for S3 Suspend end.
+ # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001
+ # @Prompt Progress Code for S3 Suspend end.
+ # @ValidList 0x80000003 | 0x03078001
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033
+
+ ## Error Code for SetVariable failure.
+ # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002
+ # @Prompt Error Code for SetVariable failure.
+ # @ValidList 0x80000006 | 0x03058002
+ gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040
+
+[PcdsFixedAtBuild, PcdsPatchableInModule]
## Dynamic type PCD can be registered callback function for Pcd setting action.
- # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function
+ # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function
# for a dynamic PCD used in PEI phase.
+ # @Prompt Max PEI PCD callback number per PCD entry.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f
- ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress
- # to store PCD value.
- #
+ ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress
+ # to store PCD value.
+ # @Prompt VPD base address.
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
-
- ## Indicate the max size of the populated image that the platform can support.
- # To support the multi populated images, the defautl supported size will
- # be enlarged to 100MB that is 10 times of the single non-populated image.
- gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
-
- ## Indicate the max size of the non-populated image that the platform can support.
- # The default size is 10MB for the casule image without populated flag setting.
- gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
-
- ## Maximun number of performance log entries during PEI phase.
- gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
-
+
## Maximum number of FV is supported by PeiCore's dispatching.
+ # @Prompt Maximum number of FV supported by PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
- ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.
+ ## Maximum File count in every FV is supported by PeiCore's dispatching.
+ # PeiCore supported File type includes PEIM, Combined PEIM and FV.
+ # @Prompt Maximum File count per FV supported by PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
## Maximum stack size for PeiCore.
+ # @Prompt Maximum stack size for PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
## Maximum PPI count is supported by PeiCore's PPI database.
+ # @Prompt Maximum PPI count supported by PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
-
- ## RTC Update Timeout Value
- gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
-
- ## Base address of the NV variable range in flash device.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
-
- ## Size of the NV variable range.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
-
- ## Maximum buffer for the single variable.
+
+ ## The maximum size of a single non-HwErr type variable.
+ # @Prompt Maximum variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
-
- ## Maximum buffer for Hardware error record variable.
+
+ ## The maximum size of single hardware error record variable.
+ # In IA32/X64 platforms, this value should be larger than 1KB.
+ # In IA64 platforms, this value should be larger than 128KB.
+ # @Prompt Maximum HwErr variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004
-
- ## Maximum buffer for the total variable store.
+
+ ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
+ # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.
+ # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).
+ # this value is used to guarantee the space of HwErr type variable and not populated by common variable.
+ # @Prompt HwErr variable storage size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006
+
+ ## The size of maximum user NV variable space.
+ # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).
+ # If the value is 0, it means user variable share the same NV storage with system variable,
+ # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.
+ # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,
+ # otherwise the variable will be regarded as user variable.
+ # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).
+ # 2) Variables managed by Variable driver internally.
+ # 3) Variables need to be locked, they MUST be set by VariableLock protocol.
+ # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.
+ # The PCD is used to guarantee the space of system variable and not populated by user variable.
+ # @Prompt Maximum user NV variable space size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009
+
+ ## The size of NV variable space reserved at UEFI boottime.
+ # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).
+ # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.
+ # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.
+ # Then the common NV variable space size at boottime will be
+ # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),
+ # and the common NV variable space size at runtime will be
+ # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.
+ # @Prompt Boottime reserved NV variable space size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007
+
+ ## Reclaim variable space at EndOfDxe.
+ # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.
+ # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.
+ # @Prompt Reclaim variable space at EndOfDxe.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008
+
+ ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.
+ # @Prompt Variable storage size.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
-
- ## Base address of the FTW spare block range in flash device.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
-
- ## Size of the FTW spare block range.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
-
- ## Base address of the FTW working block range in flash device.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
-
- ## Size of the FTW working block range.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
- ## Default timeout value for displaying progressing bar in before boot OS.
- # This value can be changed in BDS.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001
+ ## FFS filename to find the ACPI tables.
+ # @Prompt FFS name of ACPI tables storage.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
- ## Error level for hardware recorder.
- gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002
-
- ##
- # This PCD defines the print string.
- # This PCD is a sample to explain FixedAtBuild String PCD usage.
- ##
- gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
+ ## FFS filename to find the capsule coalesce image.
+ # @Prompt FFS name of capsule coalesce image.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
- ##
- # This PCD defines the times to print hello world string.
- # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
- ##
- gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
+ ## Maximum number of performance log entries during PEI phase.
+ # @Prompt Maximum number of PEI performance log entries.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
-[PcdsFixedAtBuild.IA32]
- ## Default EFI boot path name for IA32 architecture, this path is relative to
- # EFI boot disk.
- gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTIA32.EFI"|VOID*|0x40000003
-
-[PcdsFixedAtBuild.X64]
- ## Default EFI boot path name for X64 architecture, this path is relative to
- # EFI boot disk.
- gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTX64.EFI"|VOID*|0x40000003
-
-[PcdsFixedAtBuild.IPF]
- ## Default EFI boot path name for IPF architecture, this path is relative to
- # EFI boot disk.
- gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTIA64.EFI"|VOID*|0x40000003
-
-[PcdsFixedAtBuild.EBC]
- ## Default EFI boot path name for EBC architecture, this path is relative to
- # EFI boot disk.
- gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTEBC.EFI"|VOID*|0x40000003
-
-[PcdsDynamic.common]
- ## Base address of the NV variable range in flash device
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
-
- ## Size of the NV variable range.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
+ ## RTC Update Timeout Value(microsecond).
+ # @Prompt RTC Update Timeout Value.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
- ## Base address of the FTW spare block range in flash device.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
+ ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.
+ # TRUE - 16550 serial port registers are in MMIO space.
+ # FALSE - 16550 serial port registers are in I/O space.
+ # @Prompt Serial port registers use MMIO.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
- ## Size of the FTW spare block range.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
+ ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.
+ # TRUE - 16550 serial port hardware flow control will be enabled.
+ # FALSE - 16550 serial port hardware flow control will be disabled.
+ # @Prompt Enable serial port hardware flow control.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
- ## Base address of the FTW working block range in flash device.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
+ ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.
+ # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.
+ # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.
+ # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.
+ # @Prompt Enable serial port cable detetion.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
+
+ ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
+ # @Prompt Base address of serial port registers.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
- ## Size of the FTW working block range.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
+ ## Baud rate for the 16550 serial port. Default is 115200 baud.
+ # @Prompt Baud rate for serial port.
+ # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
- ## Default timeout value for displaying progressing bar in before boot OS.
- # This value can be changed in BDS.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001
+ ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.
+ # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits
+ # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.
+ # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity
+ # BIT7..BIT6 - Reserved. Must be 0.
+ #
+ # Default is No Parity, 8 Data Bits, 1 Stop Bit.
+ # @Prompt Serial port Line Control settings.
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
- ## Error level for hardware recorder.
- gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002
+ ## FIFO Control Register (FCR) for the 16550 serial port.
+ # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.
+ # BIT1 - Clear receive FIFO. 1 = Clear FIFO.
+ # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.
+ # BIT4..BIT3 - Reserved. Must be 0.
+ # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO
+ # BIT7..BIT6 - Reserved. Must be 0.
+ #
+ # Default is to enable and clear all FIFOs.
+ # @Prompt Serial port FIFO Control settings.
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
- ##
- # This PCD defines the print string.
- # This PCD is a sample to explain Dynamic PCD usage.
- ##
- gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
+ ## This setting can override the default TFTP block size. A value of 0 computes
+ # the default from MTU information. A non-zero value will be used as block size
+ # in bytes.
+ # @Prompt TFTP block size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
- ##
- # This PCD defines the times to print hello world string.
- # This PCD is a sample to explain Dynamic UINT32 PCD usage.
- ##
- gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
+ ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
+ # structure. The default value for this PCD is 0, which means that the DXE Core
+ # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
+ # boundary as close to the top of memory as feasible. If this PCD is set to a
+ # value other than 0, then the DXE Core will first attempt to allocate the
+ # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
+ # by this PCD, and if that allocation fails, retry the allocation on a 4MB
+ # boundary as close to the top of memory as feasible.
+ # @Prompt Maximum Efi System Table Pointer address.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
+
+ ## Indicates if to shadow PEIM on S3 boot path after memory is ready.
+ # TRUE - Shadow PEIM on S3 boot path after memory is ready.
+ # FALSE - Not shadow PEIM on S3 boot path after memory is ready.
+ # @Prompt Shadow Peim On S3 Boot.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
+
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
+ # @Prompt Default OEM ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
+
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
+ # @Prompt Default OEM Table ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
+
+ ## Default OEM Revision for ACPI table creation.
+ # @Prompt Default OEM Revision for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
- ##
- # This PCD defines the Console output column and the default value is 25 according to UEFI spec
- ##
+ ## Default Creator ID for ACPI table creation.
+ # @Prompt Default Creator ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
+
+ ## Default Creator Revision for ACPI table creation.
+ # @Prompt Default Creator Revision for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
+
+ ## The mask is used to control memory profile behavior.
+ # BIT0 - Enable UEFI memory profile.
+ # BIT1 - Enable SMRAM profile.
+ # @Prompt Memory Profile Property.
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041
+
+ ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.
+ # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.
+ #
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)
+ # EfiReservedMemoryType 0x0001
+ # EfiLoaderCode 0x0002
+ # EfiLoaderData 0x0004
+ # EfiBootServicesCode 0x0008
+ # EfiBootServicesData 0x0010
+ # EfiRuntimeServicesCode 0x0020
+ # EfiRuntimeServicesData 0x0040
+ # EfiConventionalMemory 0x0080
+ # EfiUnusableMemory 0x0100
+ # EfiACPIReclaimMemory 0x0200
+ # EfiACPIMemoryNVS 0x0400
+ # EfiMemoryMappedIO 0x0800
+ # EfiMemoryMappedIOPortSpace 0x1000
+ # EfiPalCode 0x2000
+ # EfiPersistentMemory 0x4000
+ # OS Reserved 0x8000000000000000
+ #
+ # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.
+ #
+ # @Prompt Memory profile memory type.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
+
+ ## UART clock frequency is for the baud rate configuration.
+ # @Prompt Serial Port Clock Rate.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
+
+ ## PCI Serial Device Info. It is an array of Device, Function, and Power Management
+ # information that describes the path that contains zero or more PCI to PCI briges
+ # followed by a PCI serial device. Each array entry is 4-bytes in length. The
+ # first byte is the PCI Device Number, then second byte is the PCI Function Number,
+ # and the last two bytes are the offset to the PCI power management capabilities
+ # register used to manage the D0-D3 states. If a PCI power management capabilities
+ # register is not present, then the last two bytes in the offset is set to 0. The
+ # array is terminated by an array entry with a PCI Device Number of 0xFF. For a
+ # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
+ # @Prompt Pci Serial Device Info
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
+
+ ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
+ # @Prompt Serial Port Extended Transmit FIFO Size in Bytes
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
+
+ ## The number of bytes between registers in serial device. The default is 1 byte.
+ # @Prompt Serial Port Register Stride in Bytes
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006B
+
+[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+ ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
+ # This PCD could be set to 0 then console output would be at max column and max row.
+ # @Prompt Console output row.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
-
- ##
- # This PCD defines the Console output row and the default value is 80 according to UEFI spec
- ##
+
+ ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.
+ # This PCD could be set to 0 then console output would be at max column and max row.
+ # @Prompt Console output column.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
-[PcdsPatchableInModule.common]
- ## Maximun number of performance log entries during PEI phase.
- gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
+ ## This PCD defines the video horizontal resolution.
+ # If this PCD is set to 0 then video resolution would be at highest resolution.
+ # @Prompt Video horizontal resolution.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009
+
+ ## This PCD defines the video vertical resolution.
+ # If this PCD is set to 0 then video resolution would be at highest resolution.
+ # @Prompt Video vertical resolution.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a
+
+ # The 4 PCDs below are used to specify the video resolution and text mode of text setup.
+ # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,
+ # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.
+ # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers
+ # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work
+ # for text setup.
+
+ ## Specify the video horizontal resolution of text setup.
+ # @Prompt Video Horizontal Resolution of Text Setup
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b
+
+ ## Specify the video vertical resolution of text setup.
+ # @Prompt Video Vertical Resolution of Text Setup
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c
- ## Base address of the NV variable range in flash device
+ ## Specify the console output column of text setup.
+ # @Prompt Console Output Column of Text Setup
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d
+
+ ## Specify the console output row of text setup.
+ # @Prompt Console Output Row of Text Setup
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
+
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+ ## Base address of the NV variable range in flash device.
+ # @Prompt Base address of flash NV variable range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
-
- ## Size of the NV variable range.
+
+ ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
+ # be reflushed through the manner of fault tolerant write.
+ # @Prompt Size of flash NV variable range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002
- ## Base address of the FTW spare block range in flash device.
+ ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
+ # @Prompt Base address of flash FTW spare block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
- ## Size of the FTW spare block range.
+ ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not
+ # be reflushed through the manner of fault tolerant write.
+ # @Prompt Size of flash FTW spare block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014
## Base address of the FTW working block range in flash device.
+ # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
+ # @Prompt Base address of flash FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010
## Size of the FTW working block range.
+ # If the value is less than one block size, the work space range should not span blocks.
+ # If the value is larger than one block size, it should be block size aligned.
+ # @Prompt Size of flash FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
- ## Default timeout value for displaying progressing bar in before boot OS.
- # This value can be changed in BDS.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001
+ ## 64-bit Base address of the NV variable range in flash device.
+ # @Prompt 64-bit Base address of flash NV variable range.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
- ## Error level for hardware recorder.
- gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002
+ ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
+ # @Prompt 64-bit Base address of flash FTW spare block range.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
- ##
- # This PCD defines the Console output column and the default value is 25 according to UEFI spec
- ##
- gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
-
- ##
- # This PCD defines the Console output row and the default value is 80 according to UEFI spec
- ##
- gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
- ##
- # This PCD defines the times to print hello world string.
- # This PCD is a sample to explain Patchable UINT32 PCD usage.
- ##
+ ## 64-bit Base address of the FTW working block range in flash device.
+ # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.
+ # @Prompt 64-bit Base address of flash FTW working block range.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
+
+ ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
+ # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
+ # @Prompt Reserved memory range for EMU variable NV storage.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
+
+ ## This PCD defines the times to print hello world string.
+ # This PCD is a sample to explain UINT32 PCD usage.
+ # @Prompt HellowWorld print times.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
-[PcdsFeatureFlag.IA32]
- ## If TRUE, the DXE IPL will load a 64-bit DxeCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
+ ## This PCD defines the HelloWorld print string.
+ # This PCD is a sample to explain String typed PCD usage.
+ # @Prompt HelloWorld print string.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004
+
+ ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.
+ # The default max size is 100MB (0x6400000) for more than one large capsule images.
+ # @Prompt Max size of populated capsule.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e
+
+ ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.
+ # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.
+ # @Prompt Max size of non-populated capsule.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
+
+ ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.
+ # @Prompt Firmware vendor.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
+
+ ## Firmware revision that is the default revision filled into the EFI System Table.
+ # @Prompt Firmware revision.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
+
+ ## Null-terminated Unicode string that describes the firmware version.
+ # @Prompt Firmware version string.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052
+
+ ## Null-terminated Unicode string that contains the date the firmware was released
+ # @Prompt Firmware release data string.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053
+
+ ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.
+ # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.
+ # The default value in PeiPhase is 1 KBytes.
+ # The default value in DxePhase is 128 KBytes.
+ # @Prompt StatusCode memory size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
+
+ ## Indicates if to reset system when memory type information changes.
+ # TRUE - Resets system when memory type information changes.
+ # FALSE - Does not reset system when memory type information changes.
+ # @Prompt Reset on memory type information change.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
+
+ ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
+ # Only following values defined in UEFI specification are valid:
+ # 0x00 (EFI_BLACK)
+ # 0x01 (EFI_BLUE)
+ # 0x02 (EFI_GREEN)
+ # 0x03 (EFI_CYAN)
+ # 0x04 (EFI_RED)
+ # 0x05 (EFI_MAGENTA)
+ # 0x06 (EFI_BROWN)
+ # 0x07 (EFI_LIGHTGRAY)
+ # 0x08 (EFI_DARKGRAY)
+ # 0x09 (EFI_LIGHTBLUE)
+ # 0x0A (EFI_LIGHTGREEN)
+ # 0x0B (EFI_LIGHTCYAN)
+ # 0x0C (EFI_LIGHTRED)
+ # 0x0D (EFI_LIGHTMAGENTA)
+ # 0x0E (EFI_YELLOW)
+ # 0x0F (EFI_WHITE)
+ # @Prompt Foreground color for browser subtile.
+ # @ValidRange 0x80000004 | 0x00 - 0x0F
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
+
+ ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
+ # Only following values defined in UEFI specification are valid:
+ # 0x00 (EFI_BLACK)
+ # 0x01 (EFI_BLUE)
+ # 0x02 (EFI_GREEN)
+ # 0x03 (EFI_CYAN)
+ # 0x04 (EFI_RED)
+ # 0x05 (EFI_MAGENTA)
+ # 0x06 (EFI_BROWN)
+ # 0x07 (EFI_LIGHTGRAY)
+ # 0x08 (EFI_DARKGRAY)
+ # 0x09 (EFI_LIGHTBLUE)
+ # 0x0A (EFI_LIGHTGREEN)
+ # 0x0B (EFI_LIGHTCYAN)
+ # 0x0C (EFI_LIGHTRED)
+ # 0x0D (EFI_LIGHTMAGENTA)
+ # 0x0E (EFI_YELLOW)
+ # 0x0F (EFI_WHITE)
+ # @Prompt Foreground color for browser field.
+ # @ValidRange 0x80000004 | 0x00 - 0x0F
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
+
+ ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
+ # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:
+ # 0x00 (EFI_BLACK)
+ # 0x01 (EFI_BLUE)
+ # 0x02 (EFI_GREEN)
+ # 0x03 (EFI_CYAN)
+ # 0x04 (EFI_RED)
+ # 0x05 (EFI_MAGENTA)
+ # 0x06 (EFI_BROWN)
+ # 0x07 (EFI_LIGHTGRAY)
+ # 0x08 (EFI_DARKGRAY)
+ # 0x09 (EFI_LIGHTBLUE)
+ # 0x0A (EFI_LIGHTGREEN)
+ # 0x0B (EFI_LIGHTCYAN)
+ # 0x0C (EFI_LIGHTRED)
+ # 0x0D (EFI_LIGHTMAGENTA)
+ # 0x0E (EFI_YELLOW)
+ # 0x0F (EFI_WHITE)
+ # @Prompt Foreground color for highlighted browser field.
+ # @ValidRange 0x80000004 | 0x00 - 0x0F
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
+
+ ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
+ # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:
+ # 0x00 (EFI_BACKGROUND_BLACK)
+ # 0x10 (EFI_BACKGROUND_BLUE)
+ # 0x20 (EFI_BACKGROUND_GREEN)
+ # 0x30 (EFI_BACKGROUND_CYAN)
+ # 0x40 (EFI_BACKGROUND_RED)
+ # 0x50 (EFI_BACKGROUND_MAGENTA)
+ # 0x60 (EFI_BACKGROUND_BROWN)
+ # 0x70 (EFI_BACKGROUND_LIGHTGRAY)
+ # @Prompt Background color for highlighted browser field.
+ # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
+
+ ## Time in second to delay for SATA devices to spin-up for recovery.
+ # @Prompt SATA spin-up delay time in second for recovery path.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
+
+ ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold
+ # runtime created S3 boot script entries. The default page number is 2. When changing the value of this
+ # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot
+ # script node created in runtime phase.
+ # @Prompt Reserved page number for S3 Boot Script Runtime Table.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
+
+ ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.
+ # The default size is 32K. When changing the value of this PCD, the platform developer should
+ # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.
+ # @Prompt Stack size for CapsulePei transfer to long mode.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D
+
+ ## Indicates if 1G page table will be enabled.
+ # TRUE - 1G page table will be enabled.
+ # FALSE - 1G page table will not be enabled.
+ # @Prompt Enable 1G page table support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E
+
+ ## Indicates if the Single Root I/O virtualization is supported.
+ # TRUE - Single Root I/O virtualization is supported.
+ # FALSE - Single Root I/O virtualization is not supported.
+ # @Prompt Enable SRIOV support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044
+
+ ## Indicates if the Alternative Routing-ID is supported.
+ # TRUE - Alternative Routing-ID is supported.
+ # FALSE - Alternative Routing-ID is not supported.
+ # @Prompt Enable ARI support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045
+
+ ## Indicates if the Multi Root I/O virtualization is supported.
+ # TRUE - Multi Root I/O virtualization is supported.
+ # FALSE - Multi Root I/O virtualization is not supported.
+ # @Prompt Enable MRIOV support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
+
+ ## Single root I/O virtualization virtual function memory BAR alignment.
+ # BITN set indicates 2 of n+12 power
+ # BIT0 set indicates 4KB alignment
+ # BIT1 set indicates 8KB alignment
+ # @Prompt SRIOV system page size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
+
+ ## SMBIOS version.
+ # @Prompt SMBIOS version.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055
+
+ ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
+ # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A
+
+ ## SMBIOS produce method.
+ # BIT0 set indicates 32-bit entry point and table are produced.
+ # BIT1 set indicates 64-bit entry point and table are produced.
+ # @Prompt The policy to produce SMBIOS entry point and table.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
+
+ ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
+ # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
+ # @Prompt Pad size for extension FPDT boot records.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
+
+ ## Indicates if ConIn device are connected on demand.
+ # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
+ # by Consplitter should be called before any real key read operation.
+ # FALSE - ConIn device may be connected normally during BDS.
+ # @Prompt ConIn connect on demand.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060
+
+ ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.
+ # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.
+ # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.
+ # @Prompt Enable ATA S.M.A.R.T feature.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065
+
+ ## Indicates if full PCI enumeration is disabled.
+ # TRUE - Full PCI enumeration is disabled.
+ # FALSE - Full PCI enumeration is not disabled.
+ # @Prompt Disable full PCI enumeration.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048
+
+ ## Disk I/O - Number of Data Buffer block.
+ # Define the size in block of the pre-allocated buffer. It provide better
+ # performance for large Disk I/O requests.
+ # @Prompt Disk I/O - Number of Data Buffer block.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039
+
+ ## This PCD specifies the PCI-based UFS host controller mmio base address.
+ # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS
+ # host controllers, their mmio base addresses are calculated one by one from this base address.
+ # @Prompt Mmio base address of pci-based UFS host controller.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
+
+[PcdsPatchableInModule]
+ ## Specify memory size with page number for PEI code when
+ # Loading Module at Fixed Address feature is enabled.
+ # The value will be set by the build tool.
+ # @Prompt LMFA PEI code page number.
+ # @ValidList 0x80000001 | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
+
+ ## Specify memory size with page number for DXE boot time code when
+ # Loading Module at Fixed Address feature is enabled.
+ # The value will be set by the build tool.
+ # @Prompt LMFA DXE boot code page number.
+ # @ValidList 0x80000001 | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
+
+ ## Specify memory size with page number for DXE runtime code when
+ # Loading Module at Fixed Address feature is enabled.
+ # The value will be set by the build tool.
+ # @Prompt LMFA DXE runtime code page number.
+ # @ValidList 0x80000001 | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
+
+ ## Specify memory size with page number for SMM code when
+ # Loading Module at Fixed Address feature is enabled.
+ # The value will be set by the build tool.
+ # @Prompt LMFA SMM code page number.
+ # @ValidList 0x80000001 | 0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c
+
+[PcdsDynamic, PcdsDynamicEx]
+ ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library
+ # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
+ # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
+ # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
+ # @Prompt S3 Boot Script Table Private Data pointer.
+ # @ValidList 0x80000001 | 0x0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
+
+ ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
+ # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
+ # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
+ # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
+ # @Prompt S3 Boot Script Table Private Smm Data pointer.
+ # @ValidList 0x80000001 | 0x0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
+
+ ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
+ # Virtual to Physical mapping according to the processor physical address bits.
+ # @Prompt Identify Mapping Page Table pointer.
+ # @ValidList 0x80000001 | 0x0
+ gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
+[UserExtensions.TianoCore."ExtraFiles"]
+ MdeModulePkgExtra.uni