X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=8cf4b75309b27e8c06c2a254a712d0c53940deb9;hp=b3ada524e363b4842cbbffc9c56683e3b7207a1a;hb=4bad9adabc25c7d011a4da90a77f985d19c441e2;hpb=cfbc1a7537d55ff0066b5635855f5739d02d15dc

diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index b3ada524e3..8cf4b75309 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -39,6 +39,10 @@
   #   This library is only intended to be used by UEFI network stack modules.
   UdpIoLib|Include/Library/UdpIoLib.h
 
+  ##  @libraryclass  The helper routines to access TCP service.
+  #   This library is only intended to be used by UEFI network stack modules.
+  TcpIoLib|Include/Library/TcpIoLib.h
+
   ##  @libraryclass  Defines a set of methods to reset whole system.
   ResetSystemLib|Include/Library/ResetSystemLib.h
 
@@ -77,6 +81,7 @@
   ##  @libraryclass  Debug Agent is used to provide soft debug capability.
   #
   DebugAgentLib|Include/Library/DebugAgentLib.h
+
 [Guids]
   ## MdeModule package token space guid
   # Include/Guid/MdeModulePkgTokenSpace.h
@@ -170,9 +175,25 @@
   #  Include/Protocol/FaultTolerantWrite.h
   gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
 
+  ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
+  #  Include/Protocol/SmmFaultTolerantWrite.h
+  gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
+  
   ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
   #  Include/Protocol/SwapAddressRange.h
   gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
+  
+  ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
+  #  Include/Protocol/SmmSwapAddressRange.h
+  gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
+  
+  ## This protocol is intended for use as a means to store data in the EFI SMM environment.
+  #  Include/Protocol/SmmVariableProtocol.h
+  gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
+
+  ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
+  #  Include/Protocol/SmmFirmwareVolumeBlock.h
+  gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
 
 [PcdsFeatureFlag]
   ## Indicate whether platform can support update capsule across a system reset
@@ -223,6 +244,10 @@
   #  interrupt to access usb device in the case of absence of usb stack. 
   #  DUET platform requires the token to be TRUE.
   gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
+  
+  ## If TRUE, the variable services are provided in DXE_SMM. The SMM driver can use SMM variable protocol 
+  #  to access variable. Otherwise the variable services are provided in DXE_RUNTIME.
+  gEfiMdeModulePkgTokenSpaceGuid.PcdSmmVariableEnable|TRUE|BOOLEAN|0x00010048
 
   ## If TRUE, HiiImageProtocol will be installed.
   #  FALSE is for size reduction.
@@ -255,7 +280,7 @@
 
   ## This PCD specifies whether the PCI bus driver probes non-standard, 
   #  such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
-  gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x10000047
+  gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
   ## This PCD specifies whether StatusCode is reported via Serial port.
   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
 
@@ -269,6 +294,11 @@
   ## This PCD specified whether ACPI SDT protocol is installed.
   gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
 
+  ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
+  #  If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.
+  #  The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.
+  gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
+  
 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
   ##
   # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
@@ -364,6 +394,17 @@
   ## RTC Update Timeout Value
   gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
 
+  ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
+  #  structure.  The default value for this PCD is 0, which means that the DXE Core
+  #  will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
+  #  boundary as close to the top of memory as feasible.  If this PCD is set to a 
+  #  value other than 0, then the DXE Core will first attempt to allocate the 
+  #  EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
+  #  by this PCD, and if that allocation fails, retry the allocation on a 4MB
+  #  boundary as close to the top of memory as feasible.
+  #
+  gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
+  
 [PcdsPatchableInModule,PcdsDynamic]
   ## This PCD defines the Console output column and the default value is 25 according to UEFI spec
   gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
@@ -421,7 +462,7 @@
   gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
 
   ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
-  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050
+  gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
 
   ## Firmware revision that is default value filled into the EFI System Table
   gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
@@ -438,6 +479,9 @@
   #  The default value in DxePhase is 128 KBytes.
   gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
 
+  ## This PCD specifies whether to reset system when memory type information changes.
+  gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
+
 [PcdsPatchableInModule]
   ## Specify  memory size with page number for PEI code when 
   #  the feature of Loading Module at Fixed Address is enabled