X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=c1f337a13eb79164a000f36724d7667ef0410905;hp=5bd23ffc5376af2b1fa42bbe65ab0c9fc0c6bfa8;hb=0677cc4925d580f7016ac092dc591be0ebe03495;hpb=92a4f6f3c7898c4d4bc54cdd0fa6734b1a352269
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 5bd23ffc53..c1f337a13e 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -4,7 +4,7 @@
# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
-# Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.
+# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
@@ -39,6 +39,10 @@
# This library is only intended to be used by UEFI network stack modules.
UdpIoLib|Include/Library/UdpIoLib.h
+ ## @libraryclass The helper routines to access TCP service.
+ # This library is only intended to be used by UEFI network stack modules.
+ TcpIoLib|Include/Library/TcpIoLib.h
+
## @libraryclass Defines a set of methods to reset whole system.
ResetSystemLib|Include/Library/ResetSystemLib.h
@@ -68,7 +72,7 @@
## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.
#
- SecurityManagementLib|MdeModulePkg/Include/Library/SecurityManagementLib.h
+ SecurityManagementLib|Include/Library/SecurityManagementLib.h
## @libraryclass OEM status code libary is used to report status code to OEM device.
#
@@ -77,6 +81,11 @@
## @libraryclass Debug Agent is used to provide soft debug capability.
#
DebugAgentLib|Include/Library/DebugAgentLib.h
+
+ ## @libraryclass Provide platform specific hooks.
+ #
+ PlatformHookLib|Include/Library/PlatformHookLib.h
+
[Guids]
## MdeModule package token space guid
# Include/Guid/MdeModulePkgTokenSpace.h
@@ -122,9 +131,14 @@
# Include/Guid/VariableFormat.h
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
+ ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
+ # Include/Guid/SmmVariableCommon.h
+ gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
+
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
# Include/Guid/Performance.h
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}
+ gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
## Guid is defined for CRC32 encapsulation scheme.
# Include/Guid/Crc32GuidedSectionExtraction.h
@@ -148,6 +162,10 @@
# Include/Guid/LoadModuleAtFixedAddress.h
gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
+ ## GUID used to store the global debug mask value into an EFI Variable
+ # Include/Guid/DebugMask.h
+ gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -170,10 +188,29 @@
# Include/Protocol/FaultTolerantWrite.h
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
+ ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
+ # Include/Protocol/SmmFaultTolerantWrite.h
+ gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
+
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
# Include/Protocol/SwapAddressRange.h
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
+
+ ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
+ # Include/Protocol/SmmSwapAddressRange.h
+ gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
+
+ ## This protocol is intended for use as a means to store data in the EFI SMM environment.
+ # Include/Protocol/SmmVariableProtocol.h
+ gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
+
+ ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
+ # Include/Protocol/SmmFirmwareVolumeBlock.h
+ gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
+ ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
+ # Include/Guid/DebugMask.h
+ gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
[PcdsFeatureFlag]
## Indicate whether platform can support update capsule across a system reset
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d
@@ -223,7 +260,7 @@
# interrupt to access usb device in the case of absence of usb stack.
# DUET platform requires the token to be TRUE.
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
-
+
## If TRUE, HiiImageProtocol will be installed.
# FALSE is for size reduction.
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100
@@ -255,7 +292,7 @@
## This PCD specifies whether the PCI bus driver probes non-standard,
# such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x10000047
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
## This PCD specifies whether StatusCode is reported via Serial port.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
@@ -269,6 +306,16 @@
## This PCD specified whether ACPI SDT protocol is installed.
gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d
+ ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.
+ # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.
+ # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e
+
+ ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.
+ # If TRUE, TEXT statement will always be set to GrayOut.
+ # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
+
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
##
# This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.
@@ -335,7 +382,7 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011
## FFS filename to find the ACPI tables
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
## Single root I/O virtualization virtual function memory BAR alignment
# BITN set indicates 2 of n+12 power
@@ -352,6 +399,11 @@
## Smbios version
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0206|UINT16|0x00010055
+ ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)
+ # to handle all link layers. If the value is non zero, the PCD value will be used as block size.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
+
[PcdsFixedAtBuild,PcdsPatchableInModule]
## Maximun number of performance log entries during PEI phase.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f
@@ -359,14 +411,66 @@
## RTC Update Timeout Value
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
-[PcdsPatchableInModule,PcdsDynamic]
+ ## If TRUE, then 16550 serial port registers are in MMIO space.
+ # If FALSE, then 16550 serial port registers are in I/O space. Default value.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
+
+ ## If TRUE, then the 16550 serial port hardware flow control is enabled.
+ # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001
+
+ ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).
+ # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.
+ # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
+
+ ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
+
+ ## Baud rate for the 16550 serial port. Default is 115200 baud.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003
+
+ ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.
+ # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits
+ # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.
+ # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity
+ # BIT7..BIT6 - Reserved. Must be 0.
+ #
+ # Default is No Parity, 8 Data Bits, 1 Stop Bit.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004
+
+ ## FIFO Control Register (FCR) for the 16550 serial port.
+ # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.
+ # BIT1 - Clear receive FIFO. 1 = Clear FIFO.
+ # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.
+ # BIT4..BIT3 - Reserved. Must be 0.
+ # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO
+ # BIT7..BIT6 - Reserved. Must be 0.
+ #
+ # Default is to enable and clear all FIFOs.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
+
+ ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
+ # structure. The default value for this PCD is 0, which means that the DXE Core
+ # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
+ # boundary as close to the top of memory as feasible. If this PCD is set to a
+ # value other than 0, then the DXE Core will first attempt to allocate the
+ # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
+ # by this PCD, and if that allocation fails, retry the allocation on a 4MB
+ # boundary as close to the top of memory as feasible.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027
+
+[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## This PCD defines the Console output column and the default value is 25 according to UEFI spec
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
## This PCD defines the Console output row and the default value is 80 according to UEFI spec
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
-[PcdsFixedAtBuild,PcdsDynamic]
+[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]
## Base address of the NV variable range in flash device
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
@@ -402,7 +506,7 @@
## This PCD specifies whether the Multi Root I/O virtualization support.
gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
-[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## This PCD defines the times to print hello world string.
# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
@@ -416,7 +520,7 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f
## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table
- gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050
## Firmware revision that is default value filled into the EFI System Table
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051
@@ -433,6 +537,81 @@
# The default value in DxePhase is 128 KBytes.
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054
+ ## This PCD specifies whether to reset system when memory type information changes.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
+
+ ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
+ # Only following values defined in UEFI specification are valid:
+ # 0x00 (EFI_BLACK)
+ # 0x01 (EFI_BLUE)
+ # 0x02 (EFI_GREEN)
+ # 0x03 (EFI_CYAN)
+ # 0x04 (EFI_RED)
+ # 0x05 (EFI_MAGENTA)
+ # 0x06 (EFI_BROWN)
+ # 0x07 (EFI_LIGHTGRAY)
+ # 0x08 (EFI_DARKGRAY)
+ # 0x09 (EFI_LIGHTBLUE)
+ # 0x0A (EFI_LIGHTGREEN)
+ # 0x0B (EFI_LIGHTCYAN)
+ # 0x0C (EFI_LIGHTRED)
+ # 0x0D (EFI_LIGHTMAGENTA)
+ # 0x0E (EFI_YELLOW)
+ # 0x0F (EFI_WHITE)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
+
+ ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
+ # Only following values defined in UEFI specification are valid:
+ # 0x00 (EFI_BLACK)
+ # 0x01 (EFI_BLUE)
+ # 0x02 (EFI_GREEN)
+ # 0x03 (EFI_CYAN)
+ # 0x04 (EFI_RED)
+ # 0x05 (EFI_MAGENTA)
+ # 0x06 (EFI_BROWN)
+ # 0x07 (EFI_LIGHTGRAY)
+ # 0x08 (EFI_DARKGRAY)
+ # 0x09 (EFI_LIGHTBLUE)
+ # 0x0A (EFI_LIGHTGREEN)
+ # 0x0B (EFI_LIGHTCYAN)
+ # 0x0C (EFI_LIGHTRED)
+ # 0x0D (EFI_LIGHTMAGENTA)
+ # 0x0E (EFI_YELLOW)
+ # 0x0F (EFI_WHITE)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
+
+ ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
+ # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:
+ # 0x00 (EFI_BLACK)
+ # 0x01 (EFI_BLUE)
+ # 0x02 (EFI_GREEN)
+ # 0x03 (EFI_CYAN)
+ # 0x04 (EFI_RED)
+ # 0x05 (EFI_MAGENTA)
+ # 0x06 (EFI_BROWN)
+ # 0x07 (EFI_LIGHTGRAY)
+ # 0x08 (EFI_DARKGRAY)
+ # 0x09 (EFI_LIGHTBLUE)
+ # 0x0A (EFI_LIGHTGREEN)
+ # 0x0B (EFI_LIGHTCYAN)
+ # 0x0C (EFI_LIGHTRED)
+ # 0x0D (EFI_LIGHTMAGENTA)
+ # 0x0E (EFI_YELLOW)
+ # 0x0F (EFI_WHITE)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
+
+ ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
+ # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:
+ # 0x00 (EFI_BACKGROUND_BLACK)
+ # 0x10 (EFI_BACKGROUND_BLUE)
+ # 0x20 (EFI_BACKGROUND_GREEN)
+ # 0x30 (EFI_BACKGROUND_CYAN)
+ # 0x40 (EFI_BACKGROUND_RED)
+ # 0x50 (EFI_BACKGROUND_MAGENTA)
+ # 0x60 (EFI_BACKGROUND_BROWN)
+ # 0x70 (EFI_BACKGROUND_LIGHTGRAY)
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# the feature of Loading Module at Fixed Address is enabled