X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=c2a6decbd46b856c442574548d1ef6cf5e847404;hp=4a1f8a59ca8be75ab4c43d313a9ce7e1e43dcb19;hb=adcd7381bb2ab1108b13a838218d8d59e09b54d4;hpb=5d2311be1ab5f7a71b3736a77937ebcd2a8bd7c8 diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec index 4a1f8a59ca..c2a6decbd4 100644 --- a/MdeModulePkg/MdeModulePkg.dec +++ b/MdeModulePkg/MdeModulePkg.dec @@ -1,19 +1,17 @@ -## @file MdeModulePkg.dec +## @file MdeModulePkg.dec # -# This package provides the modules that conform to EFI/PI Industry standards. +# This package provides the modules that conform to UEFI/PI Industry standards. # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) # and libraries instances, which are used for those modules. # -# Copyright (c) 2007 - 2010, Intel Corporation. -# -# All rights reserved. -# This program and the accompanying materials are licensed and made available under -# the terms and conditions of the BSD License which accompanies this distribution. +# Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.
+# This program and the accompanying materials are licensed and made available under +# the terms and conditions of the BSD License that accompanies this distribution. # The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# http://opensource.org/licenses/bsd-license.php. +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. # ## @@ -22,13 +20,13 @@ DEC_SPECIFICATION = 0x00010005 PACKAGE_NAME = MdeModulePkg PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288 - PACKAGE_VERSION = 0.90 + PACKAGE_VERSION = 0.92 -[Includes.common] +[Includes] Include -[LibraryClasses.common] +[LibraryClasses] ## @libraryclass IpIo layer upon EFI IP4 Protocol. # This library is only intended to be used by UEFI network stack modules. IpIoLib|Include/Library/IpIoLib.h @@ -41,6 +39,10 @@ # This library is only intended to be used by UEFI network stack modules. UdpIoLib|Include/Library/UdpIoLib.h + ## @libraryclass The helper routines to access TCP service. + # This library is only intended to be used by UEFI network stack modules. + TcpIoLib|Include/Library/TcpIoLib.h + ## @libraryclass Defines a set of methods to reset whole system. ResetSystemLib|Include/Library/ResetSystemLib.h @@ -70,13 +72,37 @@ ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement. # - SecurityManagementLib|MdeModulePkg/Include/Library/SecurityManagementLib.h + SecurityManagementLib|Include/Library/SecurityManagementLib.h ## @libraryclass OEM status code libary is used to report status code to OEM device. # OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h -[Guids.common] + ## @libraryclass Debug Agent is used to provide soft debug capability. + # + DebugAgentLib|Include/Library/DebugAgentLib.h + + ## @libraryclass Provide platform specific hooks. + # + PlatformHookLib|Include/Library/PlatformHookLib.h + + ## @libraryclass Provide platform specific hooks for SMM core. + # + SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h + + ## @libraryclass Provide capability to maintain the data integrity cross S3 phase. + # + LockBoxLib|Include/Library/LockBoxLib.h + + ## @libraryclass Provide the CPU exception handler. + # + CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h + + ## @libraryclass Provides platform specific display interface. + # + CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h + +[Guids] ## MdeModule package token space guid # Include/Guid/MdeModulePkgTokenSpace.h gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }} @@ -85,6 +111,10 @@ # Include/Guid/PcdDataBaseHobGuid.h gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }} + ## Guid for PCD DataBase signature. + # Include/Guid/PcdDataBaseSignatureGuid.h + gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }} + ## Guid for EDKII implementation GUIDed opcodes # Include/Guid/MdeModuleHii.h gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }} @@ -97,6 +127,14 @@ # Include/Guid/SystemNvDataGuid.h gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} + ## GUID used as the signature of FTW working block header. + # Include/Guid/SystemNvDataGuid.h + gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }} + + ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done. + # Include/Guid/FaultTolerantWrite.h + gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }} + ## Guid specify the device is the console out device. # Include/Guid/ConsoleOutDevice.h gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} @@ -121,9 +159,19 @@ # Include/Guid/VariableFormat.h gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} + # Include/Guid/VariableIndexTable.h + gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }} + + ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready. + # Include/Guid/SmmVariableCommon.h + gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }} + ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID # Include/Guid/Performance.h - gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }} + gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } } + gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } } + gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } } + gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } } ## Guid is defined for CRC32 encapsulation scheme. # Include/Guid/Crc32GuidedSectionExtraction.h @@ -143,7 +191,120 @@ # Include/Guid/StatusCodeDataTypeDebug.h gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }} -[Protocols.common] + ## A configuration Table Guid for Load module at fixed address + # Include/Guid/LoadModuleAtFixedAddress.h + gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } } + + ## GUID used to store the global debug mask value into an EFI Variable + # Include/Guid/DebugMask.h + gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} } + + ## Event for the DXE Core to signal idle events + # Include/Guid/EventIdle.h + gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } } + + ## Include/Guid/RecoveryDevice.h + gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }} + + ## Include/Guid/RecoveryDevice.h + gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }} + + ## Include/Guid/RecoveryDevice.h + gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }} + + ## Include/Guid/RecoveryDevice.h + gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }} + + ## Include/Guid/SmmLockBox.h + gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }} + + ## Include/Guid/AcpiS3Context.h + gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }} + + ## Include/Guid/AcpiS3Context.h + gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }} + + ## Include/Guid/BootScriptExecutorVariable.h + gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }} + gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }} + + ## Include/Guid/UsbKeyBoardLayout.h + gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }} + gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }} + + ## Include/Guid/HiiResourceSampleHii.h + gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }} + + ## Include/Guid/DriverSampleHii.h + gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }} + gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }} + gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }} + + ## Include/Guid/PlatDriOverrideHii.h + gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }} + + ## Include/Guid/Ip4ConfigHii.h + gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }} + + ## Include/Guid/VlanConfigHii.h + gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }} + + ## Include/Guid/Ip4IScsiConfigHii.h + gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }} + gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }} + + ## Include/Guid/ZeroGuid.h + gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} + + ## Include/Guid/MtcVendor.h + gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }} + + ## Guid for Firmware Performance Data Table (FPDT) implementation. + # Include/Guid/FirmwarePerformance.h + gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }} + gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }} + + ## Include/Guid/ExitBootServiceFailed.h + gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } } + + ## Include/Guid/ConnectConInEvent.h + gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }} + +[Ppis] + ## Include/Ppi/AtaController.h + gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }} + + ## Include/Ppi/UsbHostController.h + gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }} + + ## Include/Ppi/Usb2HostController.h + gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }} + + ## Include/Ppi/UsbController.h + gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }} + + ## Include/Ppi/UsbIo.h + gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }} + + ## Include/Ppi/Capsule.h + gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }} + + ## Include/Ppi/SecPerformance.h + gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }} + + ## Include/Ppi/SmmCommunication.h + gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }} + + ## Include/Ppi/SmmAccess.h + gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }} + + ## Include/Ppi/SmmControl.h + gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }} + + ## Include/Ppi/PostBootScriptTable.h + gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}} + +[Protocols] ## Load File protocol provides capability to load and unload EFI image into memory and execute it. # Include/Protocol/LoadPe32Image.h # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image. @@ -165,9 +326,54 @@ # Include/Protocol/FaultTolerantWrite.h gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }} + ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment. + # Include/Protocol/SmmFaultTolerantWrite.h + gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }} + ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV. # Include/Protocol/SwapAddressRange.h gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }} + + ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment. + # Include/Protocol/SmmSwapAddressRange.h + gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }} + + ## This protocol is intended for use as a means to store data in the EFI SMM environment. + # Include/Protocol/SmmVariableProtocol.h + gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }} + + ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled. + # Include/Protocol/VariableLock.h + gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }} + + ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment. + # Include/Protocol/SmmFirmwareVolumeBlock.h + gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }} + + ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules + # Include/Guid/DebugMask.h + gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} } + + ## Include/Protocol/LockBox.h + gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }} + + ## Include/Protocol/FormBrowserEx.h + gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } } + + ## Include/Protocol/EbcVmTest.h + gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } } + + ## Include/Protocol/EbcSimpleDebugger.h + gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } } + + ## Include/Protocol/BootLogo.h + gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } } + + ## Include/Protocol/DisplayProtocol.h + gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } } + + ## Include/Protocol/FormBrowserEx2.h + gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } } [PcdsFeatureFlag] ## Indicate whether platform can support update capsule across a system reset @@ -215,9 +421,10 @@ gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044 ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI - # interrupt to access usb device in the case of absence of usb stack. + # interrupt to access usb device in the case of absence of usb stack. + # DUET platform requires the token to be TRUE. gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047 - + ## If TRUE, HiiImageProtocol will be installed. # FALSE is for size reduction. gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100 @@ -247,18 +454,9 @@ ## This PCD specifies whether PciBus supports the hot plug device. gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d - ## This PCD specifies whether the Single Root I/O virtualization support. - gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044 - - ## This PCD specifies whether the Alternative Routing-ID support. - gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045 - - ## This PCD specifies whether the Multi Root I/O virtualization support. - gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046 - ## This PCD specifies whether the PCI bus driver probes non-standard, # such as 2K/1K/512, granularity for PCI to PCI bridge I/O window. - gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x10000047 + gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e ## This PCD specifies whether StatusCode is reported via Serial port. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022 @@ -269,6 +467,39 @@ ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d + ## This PCD specified whether ACPI SDT protocol is installed. + gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d + + ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled. + # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled. + # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests. + gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e + + ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser. + # If TRUE, TEXT statement will always be set to GrayOut. + # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE. + gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f + + ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser. + # If TRUE, the unselectable menu will be set to GrayOut. + # If FALSE, the menu will be show as normal menu entry even if it is not selectable. + gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070 + + ## If TRUE, recovery from IDE disk will be supported. + gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060 + + ## If TRUE, recovery from FAT floppy disk will be supported. + gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061 + + ## If TRUE, recovery from data CD will be supported. + gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062 + + ## If TRUE, recovery from FAT USB disk will be supported. + gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063 + + ## If TRUE, S3 performance data will be supported in ACPI FPDT table. + gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064 + [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64] ## # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase. @@ -279,17 +510,18 @@ # gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b + ## + # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only + # makes sense in the case where the DxeIpl and the DxeCore are both X64. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c + [PcdsFixedAtBuild] ## Dynamic type PCD can be registered callback function for Pcd setting action. # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function # for a dynamic PCD used in PEI phase. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f - ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress - # to store PCD value. - # - gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010 - ## Maximum number of FV is supported by PeiCore's dispatching. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030 @@ -325,7 +557,7 @@ ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable. gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005 - ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize + ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned. # The root cause is that variable driver will use FTW protocol to reclaim variable region. # If the length of variable region is larger than FTW spare size, it means the whole variable region can not # be reflushed through the manner of fault tolerant write. @@ -335,38 +567,159 @@ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011 ## FFS filename to find the ACPI tables - gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16 + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016 - ## Single root I/O virtualization virtual function memory BAR alignment - # BITN set indicates 2 of n+12 power - # BIT0 set indicates 4KB alignment - # BIT1 set indicates 8KB alignment - gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047 + ## FFS filename to find the capsule coalesce image. + gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017 + + ## Flag of enabling/disabling the feature of Loading Module at Fixed Address + # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM + # 0: Disable the feature + # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address + gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015 + + ## Smbios version + gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055 + + ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER) + # to handle all link layers. If the value is non zero, the PCD value will be used as block size. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026 + + ## Progress Code for OS Loader LoadImage start. + # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000 + gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030 + + ## Progress Code for OS Loader StartImage start. + # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001 + gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031 + + ## Progress Code for S3 Suspend start. + # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000 + gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032 + + ## Progress Code for S3 Suspend end. + # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001 + gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033 [PcdsFixedAtBuild,PcdsPatchableInModule] + ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress + # to store PCD value. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010 + ## Maximun number of performance log entries during PEI phase. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f ## RTC Update Timeout Value gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034 -[PcdsPatchableInModule,PcdsDynamic] - ## This PCD defines the Console output column and the default value is 25 according to UEFI spec + ## If TRUE, then 16550 serial port registers are in MMIO space. + # If FALSE, then 16550 serial port registers are in I/O space. Default value. + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000 + + ## If TRUE, then the 16550 serial port hardware flow control is enabled. + # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value. + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001 + + ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable). + # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value. + # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE. + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006 + + ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8. + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002 + + ## Baud rate for the 16550 serial port. Default is 115200 baud. + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003 + + ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits. + # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits + # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits. + # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity + # BIT7..BIT6 - Reserved. Must be 0. + # + # Default is No Parity, 8 Data Bits, 1 Stop Bit. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004 + + ## FIFO Control Register (FCR) for the 16550 serial port. + # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs. + # BIT1 - Clear receive FIFO. 1 = Clear FIFO. + # BIT2 - Clear transmit FIFO. 1 = Clear FIFO. + # BIT4..BIT3 - Reserved. Must be 0. + # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO + # BIT7..BIT6 - Reserved. Must be 0. + # + # Default is to enable and clear all FIFOs. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005 + + ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER + # structure. The default value for this PCD is 0, which means that the DXE Core + # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB + # boundary as close to the top of memory as feasible. If this PCD is set to a + # value other than 0, then the DXE Core will first attempt to allocate the + # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified + # by this PCD, and if that allocation fails, retry the allocation on a 4MB + # boundary as close to the top of memory as feasible. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027 + + ## This PCD specifies whether to shadow PEIM on S3 boot path after memory is ready. + gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028 + + ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification. + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034 + + ## Default OEM Table ID for ACPI table creation, it is "EDK2 ". + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035 + + ## Default OEM Revision for ACPI table creation. + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036 + + ## Default Creator ID for ACPI table creation. + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037 + + ## Default Creator Revision for ACPI table creation. + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038 + +[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] + ## This PCD defines the Console output column and the default value is 25 according to UEFI spec. + # This PCD could be set to 0 then console output could be at max column and max row. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006 - ## This PCD defines the Console output row and the default value is 80 according to UEFI spec + ## This PCD defines the Console output row and the default value is 80 according to UEFI spec. + # This PCD could be set to 0 then console output could be at max column and max row. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007 -[PcdsFixedAtBuild,PcdsDynamic] + ## This PCD defines the video horizontal resolution. + # This PCD could be set to 0 then video resolution could be at highest resolution. + gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009 + + ## This PCD defines the video vertical resolution. + # This PCD could be set to 0 then video resolution could be at highest resolution. + gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a + +[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx] ## Base address of the NV variable range in flash device gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001 - ## Base address of the FTW spare block range in flash device. + ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 ## Base address of the FTW working block range in flash device. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 + ## 64-bit Base address of the NV variable range in flash device + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001 + + ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned. + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013 + + ## 64-bit Base address of the FTW working block range in flash device. + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010 + ## This PCD defines the print string. # This PCD is a sample to explain String typed PCD usage. gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 @@ -375,21 +728,36 @@ # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize. gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008 -[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic] + ## This PCD specifies whether the Single Root I/O virtualization support. + gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044 + + ## This PCD specifies whether the Alternative Routing-ID support. + gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045 + + ## This PCD specifies whether the Multi Root I/O virtualization support. + gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046 + +[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] + ## Single root I/O virtualization virtual function memory BAR alignment + # BITN set indicates 2 of n+12 power + # BIT0 set indicates 4KB alignment + # BIT1 set indicates 8KB alignment + gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047 + ## This PCD defines the times to print hello world string. # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage. gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005 - ## Indicate the max size of the populated capsule image that the platform can support. + ## Indicate the max size of the capsule image with reset flag that the platform can support. # The default max size is 100MB (0x6400000) for more than one large capsule images. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e - ## Indicate the max size of the non-populated capsule image that the platform can support. - # The default max size is 10MB (0xa00000) for the casule image without populated flag setting. + ## Indicate the max size of the capsule image without reset flag that the platform can support. + # The default max size is 10MB (0xa00000) for the casule image without reset flag setting. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table - gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050 + gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050 ## Firmware revision that is default value filled into the EFI System Table gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051 @@ -406,3 +774,140 @@ # The default value in DxePhase is 128 KBytes. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054 + ## This PCD specifies whether to reset system when memory type information changes. + gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056 + + ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE. + # Only following values defined in UEFI specification are valid: + # 0x00 (EFI_BLACK) + # 0x01 (EFI_BLUE) + # 0x02 (EFI_GREEN) + # 0x03 (EFI_CYAN) + # 0x04 (EFI_RED) + # 0x05 (EFI_MAGENTA) + # 0x06 (EFI_BROWN) + # 0x07 (EFI_LIGHTGRAY) + # 0x08 (EFI_DARKGRAY) + # 0x09 (EFI_LIGHTBLUE) + # 0x0A (EFI_LIGHTGREEN) + # 0x0B (EFI_LIGHTCYAN) + # 0x0C (EFI_LIGHTRED) + # 0x0D (EFI_LIGHTMAGENTA) + # 0x0E (EFI_YELLOW) + # 0x0F (EFI_WHITE) + gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057 + + ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK. + # Only following values defined in UEFI specification are valid: + # 0x00 (EFI_BLACK) + # 0x01 (EFI_BLUE) + # 0x02 (EFI_GREEN) + # 0x03 (EFI_CYAN) + # 0x04 (EFI_RED) + # 0x05 (EFI_MAGENTA) + # 0x06 (EFI_BROWN) + # 0x07 (EFI_LIGHTGRAY) + # 0x08 (EFI_DARKGRAY) + # 0x09 (EFI_LIGHTBLUE) + # 0x0A (EFI_LIGHTGREEN) + # 0x0B (EFI_LIGHTCYAN) + # 0x0C (EFI_LIGHTRED) + # 0x0D (EFI_LIGHTMAGENTA) + # 0x0E (EFI_YELLOW) + # 0x0F (EFI_WHITE) + gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058 + + ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser. + # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid: + # 0x00 (EFI_BLACK) + # 0x01 (EFI_BLUE) + # 0x02 (EFI_GREEN) + # 0x03 (EFI_CYAN) + # 0x04 (EFI_RED) + # 0x05 (EFI_MAGENTA) + # 0x06 (EFI_BROWN) + # 0x07 (EFI_LIGHTGRAY) + # 0x08 (EFI_DARKGRAY) + # 0x09 (EFI_LIGHTBLUE) + # 0x0A (EFI_LIGHTGREEN) + # 0x0B (EFI_LIGHTCYAN) + # 0x0C (EFI_LIGHTRED) + # 0x0D (EFI_LIGHTMAGENTA) + # 0x0E (EFI_YELLOW) + # 0x0F (EFI_WHITE) + gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059 + + ## Specify the background color for highlighted prompt and Question value text in HII Form Browser. + # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid: + # 0x00 (EFI_BACKGROUND_BLACK) + # 0x10 (EFI_BACKGROUND_BLUE) + # 0x20 (EFI_BACKGROUND_GREEN) + # 0x30 (EFI_BACKGROUND_CYAN) + # 0x40 (EFI_BACKGROUND_RED) + # 0x50 (EFI_BACKGROUND_MAGENTA) + # 0x60 (EFI_BACKGROUND_BROWN) + # 0x70 (EFI_BACKGROUND_LIGHTGRAY) + gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A + + ## Time in second to delay for SATA devices to spin-up for recovery. + gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B + + ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold + # runtime created S3 boot script entries. The default page number is 2. When changing the value of this + # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot + # script node created in runtime phase. + gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C + + ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase. + # The default size 32K. When changing the value of this PCD, the platform developer should + # make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path. + gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D + + ## This PCD specifies whether 1G page table is enabled. + gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E + + ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for + # the extension FPDT boot records got after ReadyToBoot and before ExitBootService. + gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F + + ## This PCD specifies whether ConIn device are connected on demand. If TRUE, ConIn + # device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced + # by Consplitter should be called before any real key read operation. + gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060 + + ## This PCD specified whether the S.M.A.R.T feature of attached ATA hard disks are enabled. + gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065 + + ## This PCD specifies whether full PCI enumeration is disabled. + gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048 + +[PcdsPatchableInModule] + ## Specify memory size with page number for PEI code when + # the feature of Loading Module at Fixed Address is enabled + gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029 + + ## Specify memory size with page number for DXE boot time code when + # the feature of Loading Module at Fixed Address is enabled + gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a + + ## Specify memory size with page number for DXE runtime code when + # the feature of Loading Module at Fixed Address is enabled + gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b + + ## Specify memory size with page number for SMM code when + # the feature of Loading Module at Fixed Address is enabled + gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c + +[PcdsDynamic, PcdsDynamicEx] + ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library + # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is + # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the + # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library. + gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000 + + ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library + # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is + # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the + # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library. + gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001 +