X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=d4905a8c9a1aa37360edc055598295431538b089;hp=c8fde3abdccb1fbe09c313a09c8f09665a2b2344;hb=f324bf4dbeda4d64b769bd005331e8f9404b692d;hpb=4986c56135200fb7de90b78c47ea47381bfda95f diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec index c8fde3abdc..d4905a8c9a 100644 --- a/MdeModulePkg/MdeModulePkg.dec +++ b/MdeModulePkg/MdeModulePkg.dec @@ -4,7 +4,7 @@ # It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) # and libraries instances, which are used for those modules. # -# Copyright (c) 2007 - 2008, Intel Corporation. +# Copyright (c) 2007 - 2009, Intel Corporation. # # All rights reserved. # This program and the accompanying materials are licensed and made available under @@ -30,58 +30,43 @@ [LibraryClasses.common] ## @libraryclass IpIo layer upon EFI IP4 Protocol. + # This library is only intended to be used by UEFI network stack modules. IpIoLib|Include/Library/IpIoLib.h ## @libraryclass Basic function for UEFI network stack. + # This library is only intended to be used by UEFI network stack modules. NetLib|Include/Library/NetLib.h - - ## @libraryclass Defines a set of methods to reset whole system. - ResetSystemLib|Include/Library/ResetSystemLib.h ## @libraryclass The helper routines to access UDP service. + # This library is only intended to be used by UEFI network stack modules. UdpIoLib|Include/Library/UdpIoLib.h + ## @libraryclass Defines a set of methods to reset whole system. + ResetSystemLib|Include/Library/ResetSystemLib.h + ## @libraryclass Defines a set of methods related do S3 mode. S3Lib|Include/Library/S3Lib.h ## @libraryclass Defines a set of methods related recovery mode. RecoveryLib|Include/Library/RecoveryLib.h - ## @libraryclass Basic platform driver override functions. - PlatDriOverLib|Include/Library/PlatDriOverLib.h - ## @libraryclass Provides HII related functions. HiiLib|Include/Library/HiiLib.h - - ## @libraryclass Provides a set of interfaces to do IFR opcode creation and interact with a UEFI Form Browser. - IfrSupportLib|Include/Library/IfrSupportLib.h - - ## @libraryclass Includes two extended HII functions to create and destory Hii Package - # by create the virtual Driver Handle. - ## - ExtendedHiiLib|Include/Library/ExtendedHiiLib.h - - ## @libraryclass Defines APIs that is related to IFR operations but specific to EDK II - # implementation. - ## - ExtendedIfrSupportLib|Include/Library/ExtendedIfrSupportLib.h - + ## @libraryclass Defines a set of interfaces on how to process capusle image update. CapsuleLib|Include/Library/CapsuleLib.h - ## @libraryclass Platform BDS library definition about platform specific behavior. - PlatformBdsLib|Include/Library/PlatformBdsLib.h - - ## @libraryclass Generic BDS library definition, include the data structure and function. - GenericBdsLib|Include/Library/GenericBdsLib.h - ## @libraryclass Library for Deferred Procedure Calls. DpcLib|Include/Library/DpcLib.h - ## @libraryclass Provides all FVB runtime services defined in PI specification FVB protocol to provide - # low level control interfaces over block-oriented firmware devices. + ## @libraryclass Provides APIs for system memory test. + ## + MemoryTestLib|Include/Library/MemoryTestLib.h + + ## @libraryclass Provides global variables that are pointers + ## to the UEFI HII related protocols. ## - FvbServiceLib|Include/Library/FvbServiceLib.h + UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h [Guids.common] ## MdeModule package token space guid @@ -92,25 +77,18 @@ ## Include/Guid/PcdDataBaseHobGuid.h gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }} - ## Hob guid for Pcd Pei Callback Function Table - ## Include/Guid/PcdPeiCallbackFnTableHobGuid.h - gPcdPeiCallbackFnTableHobGuid = { 0xC625F4B2, 0xEA09, 0x4675, { 0x82, 0xD7, 0xBA, 0x36, 0x82, 0x15, 0x7A, 0x14 }} - ## Guid for EDKII implementation GUIDed opcodes + # Include/Guid/MdeModuleHii.h gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }} ## Guid for Framework vfr GUIDed opcodes. + # Include/Guid/MdeModuleHii.h gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }} ## Guid to specify the System Non Volatile FV ## Include/Guid/SystemNvDataGuid.h gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} - ## Alternate Firmware Volume Block Guid specify that the additional - # FVB protocol is installed into FVB handle - ## Include/Guid/AlternateFvBlock.h - gEfiAlternateFvBlockGuid = { 0xF496922D, 0x172F, 0x4BBC, { 0xA1, 0xEB, 0x0E, 0xEB, 0x94, 0x9C, 0x34, 0x86 }} - ## Guid specify the device is the console out device. ## Include/Guid/ConsoleOutDevice.h gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} @@ -119,26 +97,6 @@ ## Include/Guid/ConsoleInDevice.h gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} - ## Guid specify the primary console out device. - ## Include/Guid/PrimaryConsoleOutDevice.h - gEfiPrimaryConsoleOutDeviceGuid = { 0x62BDF38A, 0xE3D5, 0x492C, { 0x95, 0x0C, 0x23, 0xA7, 0xF6, 0x6E, 0x67, 0x2E }} - - ## Guid specify the primary console in device. - ## Include/Guid/PrimaryConsoleInDevice.h - gEfiPrimaryConsoleInDeviceGuid = { 0xE451DCBE, 0x96A1, 0x4729, { 0xA5, 0xCF, 0x6B, 0x9C, 0x2C, 0xFF, 0x47, 0xFD }} - - ## Guid specify the primary StdErr device. - ## Include/Guid/PrimaryStandardErrorDevice.h - gEfiPrimaryStandardErrorDeviceGuid = { 0x5A68191B, 0x9B97, 0x4752, { 0x99, 0x46, 0xE3, 0x6A, 0x5D, 0xA9, 0x42, 0xB1 }} - - ## Guid specify the default BMP logo file. - ## Include/Guid/Bmp.h - gEfiDefaultBmpLogoGuid = { 0x7BB28B99, 0x61BB, 0x11D5, { 0x9A, 0x5D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} - - ## Variale guid specify boot state. - ## Include/Guid/BootState.h - gEfiBootStateGuid = { 0x60B5E939, 0x0FCF, 0x4227, { 0xBA, 0x83, 0x6B, 0xBE, 0xD4, 0x5B, 0xC0, 0xE3 }} - ## Hob and Variable guid specify the platform memory type information. ## Include/Guid/MemoryTypeInformation.h gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }} @@ -147,25 +105,13 @@ ## Include/Guid/CapsuleVendor.h gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }} - ## Guid specify the Shell application. - ## Include/Guid/ShellFile.h - gEfiShellFileGuid = { 0xC57AD6B7, 0x0515, 0x40A8, { 0x9D, 0x21, 0x55, 0x16, 0x52, 0x85, 0x4E, 0x37 }} - ## Guid specifiy the device is the StdErr device. ## Include/Guid/StandardErrorDevice.h gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} - ## PeCoffLoader guid for PeCoffLoader entry in the HOB list. - ## Include/Guid/PeiPeCoffLoader.h - gEfiPeiPeCoffLoaderGuid = { 0xD8117CFF, 0x94A6, 0x11D4, { 0x9A, 0x3A, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} - - ## Guid specify the variable list entries put in the EFI system table. - ## Include/Guid/VariableInfo.h - gEfiVariableInfoGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} - - ## Platform Override Variable guid - ## Include/Guid/OverrideVariable.h - gEfiOverrideVariableGuid = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }} + ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table. + ## Include/Guid/VariableFormat.h + gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID ## Include/Guid/Performance.h @@ -175,9 +121,14 @@ ## Include/Guid/Crc32GuidedSectionExtraction.h gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } } + ## Include/Guid/NicIp4ConfigNvData.h + gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }} + [Protocols.common] ## Load File protocol provides capability to load and unload EFI image into memory and execute it. ## Include/Protocol/LoadPe32Image.h + ## This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image. + ## If developer need implement such functionality, they should use BasePeCoffLib. gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }} ## Print protocol defines six basic print functions to print the format unicode and ascii string. @@ -187,73 +138,27 @@ ## This protocol defines the generic memory test interfaces in Dxe phase. ## Include/Protocol/GenericMemoryTest.h gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }} - - ## Fault tolerant write lite protocol defines only one interface to write - # the buffer to the fault tolerant storage. - ## Include/Protocol/FaultTolerantWriteLite.h - gEfiFaultTolerantWriteLiteProtocolGuid = { 0x3F557189, 0x8DAE, 0x45AE, { 0xA0, 0xB3, 0x2B, 0x99, 0xCA, 0x7A, 0xA7, 0xA0 }} - - ## This protocol provides the interfaces to Get/Set the current video mode for GOP/UGA screen - ## Include/Protocol/ConsoleControl.h - gEfiConsoleControlProtocolGuid = { 0xF42F7782, 0x012E, 0x4C12, { 0x99, 0x56, 0x49, 0xF9, 0x43, 0x04, 0xF7, 0x21 }} - - ## OEM Badging Protocol defines the interface to get the OEM badging image with the dispaly attribute. - ## Include/Protocol/OEMBadging.h - gEfiOEMBadgingProtocolGuid = { 0x170E13C0, 0xBF1B, 0x4218, { 0x87, 0x1D, 0x2A, 0xBD, 0xC6, 0xF8, 0x87, 0xBC }} - - ## Include/Protocol/NicIp4Config.h - gEfiNicIp4ConfigProtocolGuid = {0xdca3d4d, 0x12da, 0x4728, { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 }} - - ## Include/Protocol/NicIp4Config.h - gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }} - - ## Include/Protocol/Tcp.h - gEfiTcpProtocolGuid = {0x02b3d5f2, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d }} - - ## Include/Protocol/PxeDhcp4CallBack.h - gEfiPxeDhcp4CallbackProtocolGuid = {0xc1544c01, 0x92a4, 0x4198, {0x8a, 0x84, 0x77, 0x85, 0x83, 0xc2, 0x36, 0x21 }} - - ## Include/Protocol/PxeDhcp4.h - gEfiPxeDhcp4ProtocolGuid = {0x03c4e624, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x29, 0x3f, 0xc1, 0x4d }} ## Include/Protocol/Dpc.h gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }} - ## Tcg addtional services to measure PeImage and ActionString. - ## Include/Protocol/TcgPlatform.h - gEfiTcgPlatformProtocolGuid = { 0x8c4c9a41, 0xbf56, 0x4627, { 0x9e, 0xa, 0xc8, 0x38, 0x6d, 0x66, 0x11, 0x5c }} + ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices. + # Include/Protocol/FaultTolerantWrite.h + gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }} - ## Protocol Guid specify the Simple TextIn Notify handle. - ## Include/Protocol/SimpleTextInExNotify.h - gSimpleTextInExNotifyGuid = { 0x856f2def, 0x4e93, 0x4d6b, { 0x94, 0xce, 0x1c, 0xfe, 0x47, 0x01, 0x3e, 0xa5 }} - ## Protocol Guid specify the device is the hot plug device. - gEfiHotPlugDeviceGuid = { 0x220AC432, 0x1D43, 0x49E5, { 0xA7, 0x4F, 0x4C, 0x9D, 0xA6, 0x7A, 0xD2, 0x3B }} - -[PcdsFeatureFlag.common] + ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV. + # Include/Protocol/SwapAddressRange.h + gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }} + +[PcdsFeatureFlag] ## Indicate whether platform can support update capsule across a system reset gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d - - ## This feature flag can be used to enable or disable the Pcd PEIM database - # traverse capability. Disable it can reduce the size of final image generated. - gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseTraverseEnabled|TRUE|BOOLEAN|0x00010020 - - ## This feature flag can be used to enable or disable the Pcd DXE database - # traverse capability. Disable it can reduce the size of final image generated. - gEfiMdeModulePkgTokenSpaceGuid.PcdDxePcdDatabaseTraverseEnabled|TRUE|BOOLEAN|0x00010021 - - ## This feature flag can be used to enable or disable the SET capability of PCD service PEIM. - # If a platform does not do PCD SET operation in PEI phase. This flag can be set to DISABLE to save size. - gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseSetEnabled|TRUE|BOOLEAN|0x00010030 - - ## This feature flag can be used to enable or disable the GET size capability of PCD service PEIM. - gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseGetSizeEnabled|TRUE|BOOLEAN|0x00010031 - - ## This feature flag can be used to enable or disable the Callback On SET capability of PCD service PEIM. - gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseCallbackOnSetEnabled|TRUE|BOOLEAN|0x00010032 - - ## This feature flag can be used to enable or disable the PCD service PEIM to handle DynamicEX PCD. - gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseExEnabled|TRUE|BOOLEAN|0x00010033 + ## This feature flag can be used to enable or disable all PCD PEIM services. + # If TRUE, all PCD PPI services will be produced. + ## If FALSE, the minimal PCD PEIM services (only GetService) will be produced. + gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020 + ## If TRUE, then the Device Path To Text Protocol should be produced by the platform. # It can be disabled to save size. gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037 @@ -262,10 +167,9 @@ # It can be disabled to save size. gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038 - ## If this PCD is set as TRUE, the code specific to NT emulator will be enabled. - gEfiMdeModulePkgTokenSpaceGuid.PcdNtEmulatorEnable|FALSE|BOOLEAN|0x0001003e - - ## If TRUE, track statistical information about variable usage stored in the EFI system table. + ## If TRUE, enable the statistic functionality about variable usage. Such information is + # stored as a vendor configuration table into the EFI system table. + # If user wants to get variable usage info, this pcd should be set as TRUE. gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f ## If TRUE, Unicode Collation Protocol will be installed. @@ -282,35 +186,31 @@ # It could be set FALSE to save size. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043 - ## If TRUE, TE image will first be searched in PeiCore dispatcher. - # If FALSE, PE image will first be searched. + ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image. + # If TE section is not found, then PeiCore will search PE section. + # If FALSE, PeiCore will first search PE section from PEIM to load the image. + # This PCD is used to tune Pei phase performance to reduce the search image time. + # It can be set according to the generated image section type. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044 - ## If PcdSupportHardwareErrorRecord is TRUE, support hardware error record via variable in BDS. - gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHardwareErrorRecord|FALSE|BOOLEAN|0x00010045 - - ## If TRUE, Robustnesss improvement such as for DUET. Default is not required. + ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI + # interrupt to access usb device in the case of absence of usb stack. + ## gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047 ## If TRUE, HiiImageProtocol will be installed. # FALSE is for size reduction. gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100 - ## If TRUE, Full UEFI Config Routing Protocol will be installed. - # FALSE is for size reduction. - gEfiMdeModulePkgTokenSpaceGuid.PcdSupportFullConfigRoutingProtocol|TRUE|BOOLEAN|0x00010101 - ## If TRUE, USB KeyBoard Driver disables the default keyboard layout. # The default keyboard layout serves as the backup when no keyboard layout can be retrieved # from HII database. gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200 ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. - # This is used to provide backward compatibility support to Framework HII module built togehter EdkCompatbilityPkg. - gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkHiiCompatibilitySupport|TRUE|BOOLEAN|0x00012008 - - ## If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it. - gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkFvHobCompatibilitySupport|FALSE|BOOLEAN|0x00012009 + # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it. + ## This is used to provide backward compatibility support to Framework HII and Framework FvHob. + gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009 ## # If TRUE, HelloWorld Application will print the verbose information. @@ -318,7 +218,27 @@ ## gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a -[PcdsFixedAtBuild.common] + ## + # If TRUE, FULL FTW protocol services (total six APIs) will be produced. + # If FASLE, only FTW Write service is available. + gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b + + ## + # If TRUE, DXE IPL must support the UEFI decompression algorithm. + # If FALSE, DXE IPL will not support UEFI decompression to save space. + gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c + +[PcdsFeatureFlag.IA32] + ## + # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase. + # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore; + # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore. + # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore + # is built in firmware. + # + gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b + +[PcdsFixedAtBuild] ## Dynamic type PCD can be registered callback function for Pcd setting action. # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function # for a dynamic PCD used in PEI phase. @@ -328,19 +248,7 @@ # to store PCD value. # gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010 - - ## Indicate the max size of the populated image that the platform can support. - # To support the multi populated images, the defautl supported size will - # be enlarged to 100MB that is 10 times of the single non-populated image. - gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e - - ## Indicate the max size of the non-populated image that the platform can support. - # The default size is 10MB for the casule image without populated flag setting. - gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f - - ## Maximun number of performance log entries during PEI phase. - gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f - + ## Maximum number of FV is supported by PeiCore's dispatching. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030 @@ -353,113 +261,48 @@ ## Maximum PPI count is supported by PeiCore's PPI database. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033 - ## RTC Update Timeout Value - gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034 - - ## Base address of the NV variable range in flash device. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001 - - ## Size of the NV variable range. + ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize + # The root cause is that variable driver will use FTW protocol to reclaim variable region. + # If the length of variable region is larger than FTW spare size, it means the whole variable region can not + # be reflushed through the manner of fault tolerant write. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002 - ## Maximum buffer for the single variable. + ## The maximum size of single common variable, that is non-HwErr type varible. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003 - ## Maximum buffer for Hardware error record variable. + ## The maximum size of single hardware error record variable. + # In IA32/X64 platforms, this value should be larger than 1KB. + # In IA64 platforms, this value should be larger than 128KB. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004 - ## Maximum buffer for the total variable store. - gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005 - - ## Base address of the FTW spare block range in flash device. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 - - ## Size of the FTW spare block range. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014 - - ## Base address of the FTW working block range in flash device. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 - - ## Size of the FTW working block range. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011 - - ## Default timeout value for displaying progressing bar in before boot OS. - # This value can be changed in BDS. - gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001 - - ## Error level for hardware recorder. - gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002 - - ## - # This PCD defines the print string. - # This PCD is a sample to explain FixedAtBuild String PCD usage. - ## - gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 - - ## - # This PCD defines the times to print hello world string. - # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage. - ## - gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005 + ## The size of reserved HwErr variable space. This space is located at NV variable range. + # HwErr type variable is stored with common non-volatile variables in NV region. + # this value is used to guarantee the space of HwErr type variable and not populated by common variable. + gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x8000|UINT32|0x30000006 -[PcdsFixedAtBuild.IA32] - ## Default EFI boot path name for IA32 architecture, this path is relative to - # EFI boot disk. - gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTIA32.EFI"|VOID*|0x40000003 - -[PcdsFixedAtBuild.X64] - ## Default EFI boot path name for X64 architecture, this path is relative to - # EFI boot disk. - gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTX64.EFI"|VOID*|0x40000003 - -[PcdsFixedAtBuild.IPF] - ## Default EFI boot path name for IPF architecture, this path is relative to - # EFI boot disk. - gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTIA64.EFI"|VOID*|0x40000003 - -[PcdsFixedAtBuild.EBC] - ## Default EFI boot path name for EBC architecture, this path is relative to - # EFI boot disk. - gEfiMdeModulePkgTokenSpaceGuid.PcdDefaultBootFileName|L"\EFI\BOOT\BOOTEBC.EFI"|VOID*|0x40000003 - -[PcdsDynamic.common] - ## Base address of the NV variable range in flash device - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001 - - ## Size of the NV variable range. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002 - - ## Base address of the FTW spare block range in flash device. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 + ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable. + gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005 - ## Size of the FTW spare block range. + ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize + # The root cause is that variable driver will use FTW protocol to reclaim variable region. + # If the length of variable region is larger than FTW spare size, it means the whole variable region can not + # be reflushed through the manner of fault tolerant write. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014 - - ## Base address of the FTW working block range in flash device. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 - + ## Size of the FTW working block range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011 - ## Default timeout value for displaying progressing bar in before boot OS. - # This value can be changed in BDS. - gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001 - - ## Error level for hardware recorder. - gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002 - - ## - # This PCD defines the print string. - # This PCD is a sample to explain Dynamic PCD usage. - ## - gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 + ## FFS filename to find the ACPI tables + gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16 - ## - # This PCD defines the times to print hello world string. - # This PCD is a sample to explain Dynamic UINT32 PCD usage. - ## - gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005 +[PcdsFixedAtBuild,PcdsPatchableInModule] + ## Maximun number of performance log entries during PEI phase. + gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f + ## RTC Update Timeout Value + gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034 + +[PcdsPatchableInModule,PcdsDynamic] ## # This PCD defines the Console output column and the default value is 25 according to UEFI spec ## @@ -469,47 +312,34 @@ # This PCD defines the Console output row and the default value is 80 according to UEFI spec ## gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007 - -[PcdsPatchableInModule.common] - ## Maximun number of performance log entries during PEI phase. - gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f - + +[PcdsFixedAtBuild,PcdsDynamic] ## Base address of the NV variable range in flash device gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001 - ## Size of the NV variable range. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002 - ## Base address of the FTW spare block range in flash device. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 - - ## Size of the FTW spare block range. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014 - + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 + ## Base address of the FTW working block range in flash device. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 - - ## Size of the FTW working block range. - gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011 - - ## Default timeout value for displaying progressing bar in before boot OS. - # This value can be changed in BDS. - gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|0xffff|UINT16|0x40000001 - - ## Error level for hardware recorder. - gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002 - + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 + + ## + # This PCD defines the print string. + # This PCD is a sample to explain String typed PCD usage. + ## + gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 + +[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic] ## # This PCD defines the times to print hello world string. - # This PCD is a sample to explain Patchable UINT32 PCD usage. + # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage. ## gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005 -[PcdsFeatureFlag.IA32] - ## If TRUE, the DXE IPL will load a 64-bit DxeCore. - gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b + ## Indicate the max size of the populated capsule image that the platform can support. + # The default max size is 100MB (0x6400000) for more than one large capsule images. + gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e - ## If TRUE, the DXE IPL will create the default IDT table. - gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplEnableIdt|TRUE|BOOLEAN|0x0001003d - - + ## Indicate the max size of the non-populated capsule image that the platform can support. + # The default max size is 10MB (0xa00000) for the casule image without populated flag setting. + gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f