X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=efd870b61828de45046206d1b1e022de96d80547;hp=6e7247016c47e7629670d842e864e9091f5deb22;hb=4f0f2316ed7699e233b362b83c7fbd63c2adf97e;hpb=1d1122292572cbaf73d8e8d2d39d01a8a28da76a
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 6e7247016c..efd870b618 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -3,14 +3,15 @@
# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
-# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.
-# This program and the accompanying materials are licensed and made available under
-# the terms and conditions of the BSD License that accompanies this distribution.
+# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.
+# Copyright (c) 2016, Linaro Ltd. All rights reserved.
+# This program and the accompanying materials are licensed and made available under
+# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php.
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+# http://opensource.org/licenses/bsd-license.php.
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
##
@@ -43,6 +44,10 @@
# This library is only intended to be used by UEFI network stack modules.
TcpIoLib|Include/Library/TcpIoLib.h
+ ## @libraryclass The helper routines to access HTTP service.
+ # This library is only intended to be used by UEFI network stack modules.
+ HttpLib|Include/Library/HttpLib.h
+
## @libraryclass Defines a set of methods to reset whole system.
ResetSystemLib|Include/Library/ResetSystemLib.h
@@ -93,11 +98,11 @@
## @libraryclass Provide capability to maintain the data integrity cross S3 phase.
#
LockBoxLib|Include/Library/LockBoxLib.h
-
+
## @libraryclass Provide the CPU exception handler.
#
CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h
-
+
## @libraryclass Provides platform specific display interface.
#
CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h
@@ -108,6 +113,45 @@
## @libraryclass Provides core boot manager functions
UefiBootManagerLib|Include/Library/UefiBootManagerLib.h
+ ## @libraryclass Provides core boot manager functions
+ PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h
+
+ ## @libraryclass Provides common interfaces about TPM measurement for other modules.
+ #
+ TpmMeasurementLib|Include/Library/TpmMeasurementLib.h
+
+ ## @libraryclass Provides authenticated variable services.
+ #
+ AuthVariableLib|Include/Library/AuthVariableLib.h
+
+ ## @libraryclass Provides variable check services and database management.
+ #
+ VarCheckLib|Include/Library/VarCheckLib.h
+
+ ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.
+ #
+ PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h
+
+ ## @libraryclass Provides services to get do the file explorer.
+ #
+ FileExplorerLib|Include/Library/FileExplorerLib.h
+
+ ## @libraryclass Provides image decoding service.
+ #
+ ImageDecoderLib|Include/Library/ImageDecoderLib.h
+
+ ## @libraryclass Provides interfaces about logo display.
+ #
+ BootLogoLib|Include/Library/BootLogoLib.h
+
+ ## @libraryclass Provides interfaces about Ipmi submit generic commond.
+ #
+ IpmiLib|Include/Library/IpmiLib.h
+
+ ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
+ #
+ PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
+
[Guids]
## MdeModule package token space guid
# Include/Guid/MdeModulePkgTokenSpace.h
@@ -165,13 +209,17 @@
# Include/Guid/VariableFormat.h
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}
+ ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.
+ # Include/Guid/AuthenticatedVariableFormat.h
+ gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }
+
# Include/Guid/VariableIndexTable.h
gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}
## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.
# Include/Guid/SmmVariableCommon.h
gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
-
+
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
# Include/Guid/Performance.h
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
@@ -183,9 +231,6 @@
# Include/Guid/Crc32GuidedSectionExtraction.h
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }
- ## Include/Guid/NicIp4ConfigNvData.h
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}
-
## Include/Guid/StatusCodeCallbackGuid.h
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}
@@ -197,14 +242,14 @@
# Include/Guid/StatusCodeDataTypeDebug.h
gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}
- ## A configuration Table Guid for Load module at fixed address
+ ## A configuration Table Guid for Load module at fixed address
# Include/Guid/LoadModuleAtFixedAddress.h
gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }
## GUID used to store the global debug mask value into an EFI Variable
- # Include/Guid/DebugMask.h
+ # Include/Guid/DebugMask.h
gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }
-
+
## Event for the DXE Core to signal idle events
# Include/Guid/EventIdle.h
gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }
@@ -237,7 +282,7 @@
## Include/Guid/UsbKeyBoardLayout.h
gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}
gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}
-
+
## Include/Guid/HiiResourceSampleHii.h
gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}
@@ -249,8 +294,8 @@
## Include/Guid/PlatDriOverrideHii.h
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
- ## Include/Guid/Ip4ConfigHii.h
- gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}
+ ## Include/Guid/Ip4Config2Hii.h
+ gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
## Include/Guid/VlanConfigHii.h
gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
@@ -261,7 +306,7 @@
## Include/Guid/ZeroGuid.h
gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
-
+
## Include/Guid/MtcVendor.h
gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}
@@ -278,7 +323,7 @@
## Include/Guid/StatusCodeDataTypeVariable.h
gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}
-
+
## Include/Guid/MemoryProfile.h
gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}
@@ -290,6 +335,18 @@
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}
gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}
+ ## Include/Guid/TtyTerm.h
+ gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
+
+ ## Include/Guid/HiiBootMaintenanceFormset.h
+ gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
+
+ gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } }
+
+ ## Include/Guid/RamDiskHii.h
+ gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }}
+
+
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
@@ -306,9 +363,6 @@
## Include/Ppi/UsbIo.h
gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}
- ## Include/Ppi/Capsule.h
- gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}
-
## Include/Ppi/SecPerformance.h
gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}
@@ -330,6 +384,9 @@
## Include/Ppi/UfsHostController.h
gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}
+ ## Include/Ppi/IpmiPpi.h
+ gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }}
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -355,15 +412,15 @@
## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.
# Include/Protocol/SmmFaultTolerantWrite.h
gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}
-
+
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.
# Include/Protocol/SwapAddressRange.h
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}
-
+
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.
# Include/Protocol/SmmSwapAddressRange.h
gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}
-
+
## This protocol is intended for use as a means to store data in the EFI SMM environment.
# Include/Protocol/SmmVariableProtocol.h
gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
@@ -383,12 +440,12 @@
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules
- # Include/Guid/DebugMask.h
+ # Include/Guid/DebugMask.h
gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }
## Include/Protocol/LockBox.h
gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
-
+
## Include/Protocol/FormBrowserEx.h
gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
@@ -410,6 +467,28 @@
## Include/Protocol/UfsHostController.h
gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
+ ## Include/Protocol/EsrtManagement.h
+ gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
+
+ ## Include/Protocol/SmmExitBootServices.h
+ gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }
+
+ ## Include/Protocol/SmmLegacyBoot.h
+ gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }
+
+ ## Include/Protocol/SmmReadyToBoot.h
+ gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }
+
+ ## Include/Protocol/PlatformLogo.h
+ gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }
+
+ ## Include/Protocol/FileExplorer.h
+ gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } }
+
+ ## Include/Protocol/IpmiProtocol.h
+ gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } }
+ gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } }
+
#
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
# 0x80000001 | Invalid value provided.
@@ -497,7 +576,7 @@
# FALSE - Does not turn off usb legacy support.
# @Prompt Turn off USB legacy support.
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047
-
+
## Indicates if HiiImageProtocol will be installed.
# FALSE is for size reduction.
# TRUE - Installs HiiImageProtocol.
@@ -626,6 +705,20 @@
# @Prompt Enable S3 performance data support.
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064
+ ## Indicates if Serial device uses half hand shake.
+ # TRUE - Serial device uses half hand shake.
+ # FALSE - Serial device doesn't use half hand shake.
+ # @Prompt Enable Serial device Half Hand Shake
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073
+
+ ## Indicates if HII data and configuration has been exported.
+ # Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for
+ # simulator platform because the performance cost for this feature.
+ # TRUE - Export HII data and configuration data.
+ # FALSE - Does not export HII data and configuration.
+ # @Prompt Enable export HII data and configuration to be used in OS runtime.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074
+
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
## Indicates if DxeIpl should switch to long mode to enter DXE phase.
# It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
@@ -714,6 +807,11 @@
# @Prompt Maximum variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
+ ## The maximum size of a single authenticated variable.
+ # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.
+ # @Prompt Maximum authenticated variable size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
+
## The maximum size of single hardware error record variable.
# In IA32/X64 platforms, this value should be larger than 1KB.
# In IA64 platforms, this value should be larger than 128KB.
@@ -796,7 +894,7 @@
# FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.
# @Prompt Enable serial port cable detetion.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006
-
+
## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.
# @Prompt Base address of serial port registers.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002
@@ -839,7 +937,7 @@
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
# structure. The default value for this PCD is 0, which means that the DXE Core
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
- # boundary as close to the top of memory as feasible. If this PCD is set to a
+ # boundary as close to the top of memory as feasible. If this PCD is set to a
# value other than 0, then the DXE Core will first attempt to allocate the
# EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified
# by this PCD, and if that allocation fails, retry the allocation on a 4MB
@@ -850,28 +948,15 @@
## Indicates if to shadow PEIM on S3 boot path after memory is ready.
# TRUE - Shadow PEIM on S3 boot path after memory is ready.
# FALSE - Not shadow PEIM on S3 boot path after memory is ready.
- # @Prompt Shadow Peim On S3 Boot.
+ # @Prompt Shadow Peim On S3 Boot.
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028
- ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
- # @Prompt Default OEM ID for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
-
- ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
- # @Prompt Default OEM Table ID for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
-
- ## Default OEM Revision for ACPI table creation.
- # @Prompt Default OEM Revision for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
-
- ## Default Creator ID for ACPI table creation.
- # @Prompt Default Creator ID for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
-
- ## Default Creator Revision for ACPI table creation.
- # @Prompt Default Creator Revision for ACPI table creation.
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
+ ## Indicates if to shadow PEIM and PeiCore after memory is ready.
+ # This PCD is used on other boot path except for S3 boot.
+ # TRUE - Shadow PEIM and PeiCore after memory is ready.
+ # FALSE - Not shadow PEIM after memory is ready.
+ # @Prompt Shadow Peim and PeiCore on boot
+ gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
## The mask is used to control memory profile behavior.
# BIT0 - Enable UEFI memory profile.
@@ -899,6 +984,7 @@
# EfiMemoryMappedIOPortSpace 0x1000
# EfiPalCode 0x2000
# EfiPersistentMemory 0x4000
+ # OEM Reserved 0x4000000000000000
# OS Reserved 0x8000000000000000
#
# e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.
@@ -906,46 +992,92 @@
# @Prompt Memory profile memory type.
gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042
- ## UART clock frequency is for the baud rate configuration.
- # @Prompt Serial Port Clock Rate.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
-
## PCI Serial Device Info. It is an array of Device, Function, and Power Management
- # information that describes the path that contains zero or more PCI to PCI briges
- # followed by a PCI serial device. Each array entry is 4-bytes in length. The
- # first byte is the PCI Device Number, then second byte is the PCI Function Number,
- # and the last two bytes are the offset to the PCI power management capabilities
- # register used to manage the D0-D3 states. If a PCI power management capabilities
- # register is not present, then the last two bytes in the offset is set to 0. The
- # array is terminated by an array entry with a PCI Device Number of 0xFF. For a
+ # information that describes the path that contains zero or more PCI to PCI briges
+ # followed by a PCI serial device. Each array entry is 4-bytes in length. The
+ # first byte is the PCI Device Number, then second byte is the PCI Function Number,
+ # and the last two bytes are the offset to the PCI power management capabilities
+ # register used to manage the D0-D3 states. If a PCI power management capabilities
+ # register is not present, then the last two bytes in the offset is set to 0. The
+ # array is terminated by an array entry with a PCI Device Number of 0xFF. For a
# non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.
# @Prompt Pci Serial Device Info
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067
- ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
+ ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset,
+ # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that
+ # describes the parameters of special PCI serial devices.
+ # Each array entry is 24-byte in length. The array is terminated
+ # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a
+ # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF.
+ # The C style structure is defined as below:
+ # typedef struct {
+ # UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.
+ # UINT16 DeviceId; ///< Device ID to match the PCI device.
+ # UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.
+ # UINT64 Offset; ///< The byte offset into to the BAR.
+ # UINT8 BarIndex; ///< Which BAR to get the UART base address.
+ # UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.
+ # UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
+ # UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
+ # UINT8 Reserved[2];
+ # } PCI_SERIAL_PARAMETER;
+ # It contains zero or more instances of the above structure.
+ # For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs
+ # to contain two instances of the above structure, with the VendorId and DeviceId
+ # equals to the Device ID and Vendor ID of the device; If the PCI device uses the
+ # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and
+ # BarIndex of second one equals to 1; If the PCI device uses the first BAR to
+ # support both UARTs, BarIndex of both instance equals to 0, Offset of first
+ # instance equals to 0 and Offset of second one equals to a value bigger than or
+ # equal to 8.
+ # For certain UART whose register needs to be accessed in DWORD aligned address,
+ # RegisterStride equals to 4.
+ # @Prompt Pci Serial Parameters
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071
+
+ ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes.
# @Prompt Serial Port Extended Transmit FIFO Size in Bytes
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068
## This PCD points to the file name GUID of the BootManagerMenuApp
# Platform can customize the PCD to point to different application for Boot Manager Menu
+ # @Prompt Boot Manager Menu File
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
## This PCD points to the formset GUID of the driver health management form
# The form will be popped up by BDS core when there are Configuration Required driver health intances.
# Platform can customize the PCD to point to different formset.
+ # @Prompt Driver Health Management Form
gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
## The number of bytes between registers in serial device. The default is 1 byte.
# @Prompt Serial Port Register Stride in Bytes
- gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006B
-
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d
+
+ ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.
+ # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.
+ # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.
+ # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A
+
+ ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS
+ # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h
+ # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.
+ # BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.
+ # BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.
+ # BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.
+ # BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.
+ # @Prompt Exposed ACPI table versions.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c
+
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
# This PCD could be set to 0 then console output would be at max column and max row.
# @Prompt Console output row.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006
- ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.
+ ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.
# This PCD could be set to 0 then console output would be at max column and max row.
# @Prompt Console output column.
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007
@@ -984,6 +1116,15 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+ ## UART clock frequency is for the baud rate configuration.
+ # @Prompt Serial Port Clock Rate.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066
+
+ ## This PCD points to the front page formset GUID
+ # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page
+ # @Prompt Front Page Formset.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e
+
## Base address of the NV variable range in flash device.
# @Prompt Base address of flash NV variable range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
@@ -1105,7 +1246,7 @@
# @Prompt Foreground color for browser subtile.
# @ValidRange 0x80000004 | 0x00 - 0x0F
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057
-
+
## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.
# Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BLACK)
@@ -1127,7 +1268,7 @@
# @Prompt Foreground color for browser field.
# @ValidRange 0x80000004 | 0x00 - 0x0F
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058
-
+
## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.
# The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BLACK)
@@ -1149,7 +1290,7 @@
# @Prompt Foreground color for highlighted browser field.
# @ValidRange 0x80000004 | 0x00 - 0x0F
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059
-
+
## Specify the background color for highlighted prompt and Question value text in HII Form Browser.
# The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BACKGROUND_BLACK)
@@ -1168,10 +1309,10 @@
# @Prompt SATA spin-up delay time in second for recovery path.
gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B
- ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold
- # runtime created S3 boot script entries. The default page number is 2. When changing the value of this
- # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot
- # script node created in runtime phase.
+ ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory
+ # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.
+ # When changing the value of this PCD, the platform developer should make sure the memory size is
+ # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.
# @Prompt Reserved page number for S3 Boot Script Runtime Table.
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C
@@ -1262,6 +1403,88 @@
# @Prompt Mmio base address of pci-based UFS host controller.
gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061
+ ## Specify Max ESRT cache entry number supported for FMP instances
+ #
+ # @Prompt Max FMP ESRT entry number to be synced & cached in repository.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b
+
+ ## Specify Max ESRT cache entry number supported for Non FMP instances
+ #
+ # @Prompt Max Non-FMP ESRT entry number to be cached in repository.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c
+
+ ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process
+ #
+ # @Prompt Flag to request system reboot after processing capsule.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
+
+ ## Publish PropertiesTable or not.
+ #
+ # If this PCD is TRUE, DxeCore publishs PropertiesTable.
+ # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
+ # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
+ # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
+ # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
+ #
+ # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
+ # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
+ # use EfiRuntimeServicesData for runtime driver PE image header and other section.
+ # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
+ # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
+ # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
+ #
+ # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
+ # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
+ # section. If PE code/data sections are merged, the result is unpredictable.
+ #
+ # UEFI 2.6 specification does not recommend to use this BIT0 attribute.
+ #
+ # @Prompt Publish UEFI PropertiesTable.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e
+
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
+ # @Prompt Default OEM ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
+
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".
+ # According to ACPI specification, this field is particularly useful when
+ # defining a definition block to distinguish definition block functions.
+ # The OEM assigns each dissimilar table a new OEM Table ID.
+ # This PCD is ignored for definition block.
+ # @Prompt Default OEM Table ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035
+
+ ## Default OEM Revision for ACPI table creation.
+ # According to ACPI specification, for LoadTable() opcode, the OS can also
+ # check the OEM Table ID and Revision ID against a database for a newer
+ # revision Definition Block of the same OEM Table ID and load it instead.
+ # This PCD is ignored for definition block.
+ # @Prompt Default OEM Revision for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036
+
+ ## Default Creator ID for ACPI table creation.
+ # According to ACPI specification, for tables containing Definition Blocks,
+ # this is the ID for the ASL Compiler.
+ # This PCD is ignored for definition block.
+ # @Prompt Default Creator ID for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037
+
+ ## Default Creator Revision for ACPI table creation.
+ # According to ACPI specification, for tables containing Definition Blocks,
+ # this is the revision for the ASL Compiler.
+ # This PCD is ignored for definition block.
+ # @Prompt Default Creator Revision for ACPI table creation.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038
+
+ ## Indicates if to set NX for stack.
+ # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.
+ # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
+ # IA32 PAE is supported and Execute Disable Bit is available.
+ # TRUE - to set NX for stack.
+ # FALSE - Not to set NX for stack.
+ # @Prompt Set NX for stack.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.
@@ -1269,21 +1492,21 @@
# @Prompt LMFA PEI code page number.
# @ValidList 0x80000001 | 0
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029
-
+
## Specify memory size with page number for DXE boot time code when
# Loading Module at Fixed Address feature is enabled.
# The value will be set by the build tool.
# @Prompt LMFA DXE boot code page number.
# @ValidList 0x80000001 | 0
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a
-
+
## Specify memory size with page number for DXE runtime code when
# Loading Module at Fixed Address feature is enabled.
# The value will be set by the build tool.
# @Prompt LMFA DXE runtime code page number.
# @ValidList 0x80000001 | 0
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b
-
+
## Specify memory size with page number for SMM code when
# Loading Module at Fixed Address feature is enabled.
# The value will be set by the build tool.
@@ -1308,7 +1531,7 @@
# @ValidList 0x80000001 | 0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
- ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
+ ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
# Virtual to Physical mapping according to the processor physical address bits.
# @Prompt Identify Mapping Page Table pointer.
# @ValidList 0x80000001 | 0x0