X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=OvmfPkg%2FPlatformPei%2FPlatform.c;h=0fc227803a84366e5f339402173ad0c04b7b0a77;hp=ce149e4f979e2c6589fa383ebc2b4232e9df99dc;hb=7b8fe63561b43f0ae47673a32d27e4967149b556;hpb=931a0c74ed405a9b61afaa7ce1796f3e656d90b9
diff --git a/OvmfPkg/PlatformPei/Platform.c b/OvmfPkg/PlatformPei/Platform.c
index ce149e4f97..0fc227803a 100644
--- a/OvmfPkg/PlatformPei/Platform.c
+++ b/OvmfPkg/PlatformPei/Platform.c
@@ -1,7 +1,7 @@
/**@file
Platform PEI driver
- Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.
+ Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.
Copyright (c) 2011, Andrei Warkentin
This program and the accompanying materials
@@ -22,6 +22,7 @@
//
// The Library classes this module consumes
//
+#include
#include
#include
#include
@@ -30,10 +31,12 @@
#include
#include
#include
+#include
#include
#include
#include
#include
+#include
#include "Platform.h"
#include "Cmos.h"
@@ -59,6 +62,13 @@ EFI_PEI_PPI_DESCRIPTOR mPpiBootMode[] = {
};
+UINT16 mHostBridgeDevId;
+
+EFI_BOOT_MODE mBootMode = BOOT_WITH_FULL_CONFIGURATION;
+
+BOOLEAN mS3Supported = FALSE;
+
+
VOID
AddIoMemoryBaseSizeHob (
EFI_PHYSICAL_ADDRESS MemoryBase,
@@ -79,7 +89,8 @@ AddIoMemoryBaseSizeHob (
VOID
AddReservedMemoryBaseSizeHob (
EFI_PHYSICAL_ADDRESS MemoryBase,
- UINT64 MemorySize
+ UINT64 MemorySize,
+ BOOLEAN Cacheable
)
{
BuildResourceDescriptorHob (
@@ -87,6 +98,12 @@ AddReservedMemoryBaseSizeHob (
EFI_RESOURCE_ATTRIBUTE_PRESENT |
EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE |
+ (Cacheable ?
+ EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
+ EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE :
+ 0
+ ) |
EFI_RESOURCE_ATTRIBUTE_TESTED,
MemoryBase,
MemorySize
@@ -163,10 +180,9 @@ AddUntestedMemoryRangeHob (
AddUntestedMemoryBaseSizeHob (MemoryBase, (UINT64)(MemoryLimit - MemoryBase));
}
-
VOID
MemMapInitialization (
- EFI_PHYSICAL_ADDRESS TopOfMemory
+ VOID
)
{
//
@@ -185,8 +201,8 @@ MemMapInitialization (
EFI_RESOURCE_IO,
EFI_RESOURCE_ATTRIBUTE_PRESENT |
EFI_RESOURCE_ATTRIBUTE_INITIALIZED,
- 0xC000,
- 0x4000
+ PcdGet64 (PcdPciIoBase),
+ PcdGet64 (PcdPciIoSize)
);
//
@@ -194,73 +210,279 @@ MemMapInitialization (
//
AddIoMemoryRangeHob (0x0A0000, BASE_1MB);
+ if (!mXen) {
+ UINT32 TopOfLowRam;
+ UINT64 PciExBarBase;
+ UINT32 PciBase;
+ UINT32 PciSize;
+
+ TopOfLowRam = GetSystemMemorySizeBelow4gb ();
+ if (mHostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
+ //
+ // The MMCONFIG area is expected to fall between the top of low RAM and
+ // the base of the 32-bit PCI host aperture.
+ //
+ PciExBarBase = FixedPcdGet64 (PcdPciExpressBaseAddress);
+ ASSERT (TopOfLowRam <= PciExBarBase);
+ ASSERT (PciExBarBase <= MAX_UINT32 - SIZE_256MB);
+ PciBase = (UINT32)(PciExBarBase + SIZE_256MB);
+ } else {
+ PciBase = (TopOfLowRam < BASE_2GB) ? BASE_2GB : TopOfLowRam;
+ }
+
+ //
+ // address purpose size
+ // ------------ -------- -------------------------
+ // max(top, 2g) PCI MMIO 0xFC000000 - max(top, 2g)
+ // 0xFC000000 gap 44 MB
+ // 0xFEC00000 IO-APIC 4 KB
+ // 0xFEC01000 gap 1020 KB
+ // 0xFED00000 HPET 1 KB
+ // 0xFED00400 gap 111 KB
+ // 0xFED1C000 gap (PIIX4) / RCRB (ICH9) 16 KB
+ // 0xFED20000 gap 896 KB
+ // 0xFEE00000 LAPIC 1 MB
+ //
+ PciSize = 0xFC000000 - PciBase;
+ AddIoMemoryBaseSizeHob (PciBase, PciSize);
+ PcdSet64 (PcdPciMmio32Base, PciBase);
+ PcdSet64 (PcdPciMmio32Size, PciSize);
+ AddIoMemoryBaseSizeHob (0xFEC00000, SIZE_4KB);
+ AddIoMemoryBaseSizeHob (0xFED00000, SIZE_1KB);
+ if (mHostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
+ AddIoMemoryBaseSizeHob (ICH9_ROOT_COMPLEX_BASE, SIZE_16KB);
+ //
+ // Note: there should be an
+ //
+ // AddIoMemoryBaseSizeHob (PciExBarBase, SIZE_256MB);
+ //
+ // call below, just like the one above for RCBA. However, Linux insists
+ // that the MMCONFIG area be marked in the E820 or UEFI memory map as
+ // "reserved memory" -- Linux does not content itself with a simple gap
+ // in the memory map wherever the MCFG ACPI table points to.
+ //
+ // This appears to be a safety measure. The PCI Firmware Specification
+ // (rev 3.1) says in 4.1.2. "MCFG Table Description": "The resources can
+ // *optionally* be returned in [...] EFIGetMemoryMap as reserved memory
+ // [...]". (Emphasis added here.)
+ //
+ // Normally we add memory resource descriptor HOBs in
+ // QemuInitializeRam(), and pre-allocate from those with memory
+ // allocation HOBs in InitializeRamRegions(). However, the MMCONFIG area
+ // is most definitely not RAM; so, as an exception, cover it with
+ // uncacheable reserved memory right here.
+ //
+ AddReservedMemoryBaseSizeHob (PciExBarBase, SIZE_256MB, FALSE);
+ BuildMemoryAllocationHob (PciExBarBase, SIZE_256MB,
+ EfiReservedMemoryType);
+ }
+ AddIoMemoryBaseSizeHob (PcdGet32(PcdCpuLocalApicBaseAddress), SIZE_1MB);
+ }
+}
+
+EFI_STATUS
+GetNamedFwCfgBoolean (
+ IN CHAR8 *FwCfgFileName,
+ OUT BOOLEAN *Setting
+ )
+{
+ EFI_STATUS Status;
+ FIRMWARE_CONFIG_ITEM FwCfgItem;
+ UINTN FwCfgSize;
+ UINT8 Value[3];
+
+ Status = QemuFwCfgFindFile (FwCfgFileName, &FwCfgItem, &FwCfgSize);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (FwCfgSize > sizeof Value) {
+ return EFI_BAD_BUFFER_SIZE;
+ }
+ QemuFwCfgSelectItem (FwCfgItem);
+ QemuFwCfgReadBytes (FwCfgSize, Value);
+
+ if ((FwCfgSize == 1) ||
+ (FwCfgSize == 2 && Value[1] == '\n') ||
+ (FwCfgSize == 3 && Value[1] == '\r' && Value[2] == '\n')) {
+ switch (Value[0]) {
+ case '0':
+ case 'n':
+ case 'N':
+ *Setting = FALSE;
+ return EFI_SUCCESS;
+
+ case '1':
+ case 'y':
+ case 'Y':
+ *Setting = TRUE;
+ return EFI_SUCCESS;
+
+ default:
+ break;
+ }
+ }
+ return EFI_PROTOCOL_ERROR;
+}
+
+#define UPDATE_BOOLEAN_PCD_FROM_FW_CFG(TokenName) \
+ do { \
+ BOOLEAN Setting; \
+ \
+ if (!EFI_ERROR (GetNamedFwCfgBoolean ( \
+ "opt/ovmf/" #TokenName, &Setting))) { \
+ PcdSetBool (TokenName, Setting); \
+ } \
+ } while (0)
+
+VOID
+NoexecDxeInitialization (
+ VOID
+ )
+{
+ UPDATE_BOOLEAN_PCD_FROM_FW_CFG (PcdPropertiesTableEnable);
+ UPDATE_BOOLEAN_PCD_FROM_FW_CFG (PcdSetNxForStack);
+}
+
+VOID
+PciExBarInitialization (
+ VOID
+ )
+{
+ union {
+ UINT64 Uint64;
+ UINT32 Uint32[2];
+ } PciExBarBase;
+
//
- // address purpose size
- // ------------ -------- -------------------------
- // max(top, 2g) PCI MMIO 0xFC000000 - max(top, 2g)
- // 0xFC000000 gap 44 MB
- // 0xFEC00000 IO-APIC 4 KB
- // 0xFEC01000 gap 1020 KB
- // 0xFED00000 HPET 1 KB
- // 0xFED00400 gap 1023 KB
- // 0xFEE00000 LAPIC 1 MB
+ // We only support the 256MB size for the MMCONFIG area:
+ // 256 buses * 32 devices * 8 functions * 4096 bytes config space.
//
- AddIoMemoryRangeHob (TopOfMemory < BASE_2GB ? BASE_2GB : TopOfMemory, 0xFC000000);
- AddIoMemoryBaseSizeHob (0xFEC00000, SIZE_4KB);
- AddIoMemoryBaseSizeHob (0xFED00000, SIZE_1KB);
- AddIoMemoryBaseSizeHob (PcdGet32(PcdCpuLocalApicBaseAddress), SIZE_1MB);
-}
+ // The masks used below enforce the Q35 requirements that the MMCONFIG area
+ // be (a) correctly aligned -- here at 256 MB --, (b) located under 64 GB.
+ //
+ // Note that (b) also ensures that the minimum address width we have
+ // determined in AddressWidthInitialization(), i.e., 36 bits, will suffice
+ // for DXE's page tables to cover the MMCONFIG area.
+ //
+ PciExBarBase.Uint64 = FixedPcdGet64 (PcdPciExpressBaseAddress);
+ ASSERT ((PciExBarBase.Uint32[1] & MCH_PCIEXBAR_HIGHMASK) == 0);
+ ASSERT ((PciExBarBase.Uint32[0] & MCH_PCIEXBAR_LOWMASK) == 0);
+ //
+ // Clear the PCIEXBAREN bit first, before programming the high register.
+ //
+ PciWrite32 (DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_LOW), 0);
+
+ //
+ // Program the high register. Then program the low register, setting the
+ // MMCONFIG area size and enabling decoding at once.
+ //
+ PciWrite32 (DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_HIGH), PciExBarBase.Uint32[1]);
+ PciWrite32 (
+ DRAMC_REGISTER_Q35 (MCH_PCIEXBAR_LOW),
+ PciExBarBase.Uint32[0] | MCH_PCIEXBAR_BUS_FF | MCH_PCIEXBAR_EN
+ );
+}
VOID
MiscInitialization (
- BOOLEAN Xen
+ VOID
)
{
+ UINTN PmCmd;
+ UINTN Pmba;
+ UINTN AcpiCtlReg;
+ UINT8 AcpiEnBit;
+
//
// Disable A20 Mask
//
IoOr8 (0x92, BIT1);
//
- // Build the CPU hob with 36-bit addressing and 16-bits of IO space.
+ // Build the CPU HOB with guest RAM size dependent address width and 16-bits
+ // of IO space. (Side note: unlike other HOBs, the CPU HOB is needed during
+ // S3 resume as well, so we build it unconditionally.)
//
- BuildCpuHob (36, 16);
+ BuildCpuHob (mPhysMemAddressWidth, 16);
- if (!Xen) {
+ //
+ // Determine platform type and save Host Bridge DID to PCD
+ //
+ switch (mHostBridgeDevId) {
+ case INTEL_82441_DEVICE_ID:
+ PmCmd = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
+ Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
+ AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
+ AcpiEnBit = PIIX4_PMREGMISC_PMIOSE;
+ break;
+ case INTEL_Q35_MCH_DEVICE_ID:
+ PmCmd = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
+ Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
+ AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
+ AcpiEnBit = ICH9_ACPI_CNTL_ACPI_EN;
+ break;
+ default:
+ DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
+ __FUNCTION__, mHostBridgeDevId));
+ ASSERT (FALSE);
+ return;
+ }
+ PcdSet16 (PcdOvmfHostBridgePciDevId, mHostBridgeDevId);
+
+ //
+ // If the appropriate IOspace enable bit is set, assume the ACPI PMBA
+ // has been configured (e.g., by Xen) and skip the setup here.
+ // This matches the logic in AcpiTimerLibConstructor ().
+ //
+ if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
- // The PEI phase should be exited with fully accessibe PIIX4 IO space:
+ // The PEI phase should be exited with fully accessibe ACPI PM IO space:
// 1. set PMBA
//
- PciAndThenOr32 (
- PCI_LIB_ADDRESS (0, 1, 3, 0x40),
- (UINT32) ~0xFFC0,
- PcdGet16 (PcdAcpiPmBaseAddress)
- );
+ PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
//
// 2. set PCICMD/IOSE
//
- PciOr8 (
- PCI_LIB_ADDRESS (0, 1, 3, PCI_COMMAND_OFFSET),
- EFI_PCI_COMMAND_IO_SPACE
+ PciOr8 (PmCmd, EFI_PCI_COMMAND_IO_SPACE);
+
+ //
+ // 3. set ACPI PM IO enable bit (PMREGMISC:PMIOSE or ACPI_CNTL:ACPI_EN)
+ //
+ PciOr8 (AcpiCtlReg, AcpiEnBit);
+ }
+
+ if (mHostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
+ //
+ // Set Root Complex Register Block BAR
+ //
+ PciWrite32 (
+ POWER_MGMT_REGISTER_Q35 (ICH9_RCBA),
+ ICH9_ROOT_COMPLEX_BASE | ICH9_RCBA_EN
);
//
- // 3. set PMREGMISC/PMIOSE
+ // Set PCI Express Register Range Base Address
//
- PciOr8 (PCI_LIB_ADDRESS (0, 1, 3, 0x80), 0x01);
+ PciExBarInitialization ();
}
}
VOID
BootModeInitialization (
+ VOID
)
{
- EFI_STATUS Status;
+ EFI_STATUS Status;
- Status = PeiServicesSetBootMode (BOOT_WITH_FULL_CONFIGURATION);
+ if (CmosRead8 (0xF) == 0xFE) {
+ mBootMode = BOOT_ON_S3_RESUME;
+ }
+ CmosWrite8 (0xF, 0x00);
+
+ Status = PeiServicesSetBootMode (mBootMode);
ASSERT_EFI_ERROR (Status);
Status = PeiServicesInstallPpi (mPpiBootMode);
@@ -282,8 +504,9 @@ ReserveEmuVariableNvStore (
//
VariableStore =
(EFI_PHYSICAL_ADDRESS)(UINTN)
- AllocateRuntimePool (
- 2 * PcdGet32 (PcdFlashNvStorageFtwSpareSize)
+ AllocateAlignedRuntimePages (
+ EFI_SIZE_TO_PAGES (2 * PcdGet32 (PcdFlashNvStorageFtwSpareSize)),
+ PcdGet32 (PcdFlashNvStorageFtwSpareSize)
);
DEBUG ((EFI_D_INFO,
"Reserved variable store memory: 0x%lX; size: %dkb\n",
@@ -299,7 +522,7 @@ DebugDumpCmos (
VOID
)
{
- UINTN Loop;
+ UINT32 Loop;
DEBUG ((EFI_D_INFO, "CMOS:\n"));
@@ -315,6 +538,27 @@ DebugDumpCmos (
}
+VOID
+S3Verification (
+ VOID
+ )
+{
+#if defined (MDE_CPU_X64)
+ if (FeaturePcdGet (PcdSmmSmramRequire) && mS3Supported) {
+ DEBUG ((EFI_D_ERROR,
+ "%a: S3Resume2Pei doesn't support X64 PEI + SMM yet.\n", __FUNCTION__));
+ DEBUG ((EFI_D_ERROR,
+ "%a: Please disable S3 on the QEMU command line (see the README),\n",
+ __FUNCTION__));
+ DEBUG ((EFI_D_ERROR,
+ "%a: or build OVMF with \"OvmfPkgIa32X64.dsc\".\n", __FUNCTION__));
+ ASSERT (FALSE);
+ CpuDeadLoop ();
+ }
+#endif
+}
+
+
/**
Perform Platform PEI initialization.
@@ -331,28 +575,43 @@ InitializePlatform (
IN CONST EFI_PEI_SERVICES **PeiServices
)
{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS TopOfMemory;
- BOOLEAN Xen;
-
DEBUG ((EFI_D_ERROR, "Platform PEIM Loaded\n"));
DebugDumpCmos ();
- TopOfMemory = MemDetect ();
+ XenDetect ();
- Status = InitializeXen ();
- Xen = EFI_ERROR (Status) ? FALSE : TRUE;
+ if (QemuFwCfgS3Enabled ()) {
+ DEBUG ((EFI_D_INFO, "S3 support was detected on QEMU\n"));
+ mS3Supported = TRUE;
+ }
- ReserveEmuVariableNvStore ();
+ S3Verification ();
+ BootModeInitialization ();
+ AddressWidthInitialization ();
- PeiFvInitialization ();
+ PublishPeiMemory ();
- MemMapInitialization (TopOfMemory);
+ InitializeRamRegions ();
- MiscInitialization (Xen);
+ if (mXen) {
+ DEBUG ((EFI_D_INFO, "Xen was detected\n"));
+ InitializeXen ();
+ }
- BootModeInitialization ();
+ //
+ // Query Host Bridge DID
+ //
+ mHostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
+
+ if (mBootMode != BOOT_ON_S3_RESUME) {
+ ReserveEmuVariableNvStore ();
+ PeiFvInitialization ();
+ MemMapInitialization ();
+ NoexecDxeInitialization ();
+ }
+
+ MiscInitialization ();
return EFI_SUCCESS;
}