X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=PcAtChipsetPkg%2FPcAtChipsetPkg.dec;h=0e66ff0ba3770cf765cfe36d592151d72eaa238a;hp=cbd57070fb7be08e8a38c109dbb65f27067e459e;hb=76c09700edc67686b29662e81a3ca7d947594ce5;hpb=f5f47471cf1ce284b7d0ca5101e50ea52ea1db60
diff --git a/PcAtChipsetPkg/PcAtChipsetPkg.dec b/PcAtChipsetPkg/PcAtChipsetPkg.dec
index cbd57070fb..0e66ff0ba3 100644
--- a/PcAtChipsetPkg/PcAtChipsetPkg.dec
+++ b/PcAtChipsetPkg/PcAtChipsetPkg.dec
@@ -4,7 +4,8 @@
# This package is designed to public interfaces and implementation which follows
# PcAt defacto standard.
#
-# Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.
+# Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.
+# Copyright (c) 2017, AMD Inc. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -30,7 +31,7 @@
## @libraryclass Provides functions to manage I/O APIC Redirection Table Entries.
#
IoApicLib|Include/Library/IoApicLib.h
-
+
[Guids]
gPcAtChipsetPkgTokenSpaceGuid = { 0x326ae723, 0xae32, 0x4589, { 0x98, 0xb8, 0xca, 0xc2, 0x3c, 0xdc, 0xc1, 0xb1 } }
@@ -51,7 +52,7 @@
# 1) If platform only support pure UEFI, value should be set to 0xFFFF or 0xFFFE;
# Because only clock interrupt is allowed in legacy mode in pure UEFI platform.
# 2) If platform install CSM and use thunk module:
- # a) If thunk call provided by CSM binary requires some legacy interrupt support, the corresponding bit
+ # a) If thunk call provided by CSM binary requires some legacy interrupt support, the corresponding bit
# should be opened as 0.
# For example, if keyboard interfaces provided CSM binary use legacy keyboard interrupt in 8259 bit 1, then
# the value should be set to 0xFFFC.
@@ -59,11 +60,11 @@
# to 0xFFFF or 0xFFFE.
#
# The default value of legacy mode mask could be changed by EFI_LEGACY_8259_PROTOCOL->SetMask(). But it is rarely
- # need change it except some special cases such as when initializing the CSM binary, it should be set to 0xFFFF to
+ # need change it except some special cases such as when initializing the CSM binary, it should be set to 0xFFFF to
# mask all legacy interrupt. Please restore the original legacy mask value if changing is made for these special case.
# @Prompt 8259 Legacy Mode mask.
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeMask|0xFFFF|UINT16|0x00000001
-
+
## Pcd8259LegacyModeEdgeLevel defines the default edge level for legacy mode's interrrupt controller.
# For the corresponding bits, 0 = Edge triggered and 1 = Level triggered.
# @Prompt 8259 Legacy Mode edge level.
@@ -117,7 +118,7 @@
# The default value of 100000 100 ns units is the same as 10 ms.
# @Prompt Default period of HPET timer.
gPcAtChipsetPkgTokenSpaceGuid.PcdHpetDefaultTimerPeriod|100000|UINT64|0x0000000B
-
+
## This PCD specifies the base address of the IO APIC.
# @Prompt IO APIC base address.
gPcAtChipsetPkgTokenSpaceGuid.PcdIoApicBaseAddress|0xFEC00000|UINT32|0x0000000C
@@ -130,10 +131,10 @@
# @Prompt Maximal valid year in RTC.
# @Expression 0x80000001 | gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear < gPcAtChipsetPkgTokenSpaceGuid.PcdMinimalValidYear + 100
gPcAtChipsetPkgTokenSpaceGuid.PcdMaximalValidYear|2097|UINT16|0x0000000E
-
+
[PcdsFixedAtBuild, PcdsPatchableInModule]
## Defines the ACPI register set base address.
- # The invalid 0xFFFF is as its default value. It must be configured to the real value.
+ # The invalid 0xFFFF is as its default value. It must be configured to the real value.
# @Prompt ACPI Timer IO Port Address
gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPortBaseAddress |0xFFFF|UINT16|0x00000010
@@ -142,26 +143,26 @@
gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPciBusNumber | 0x00| UINT8|0x00000011
## Defines the PCI Device Number of the PCI device that contains the BAR and Enable for ACPI hardware registers.
- # The invalid 0xFF is as its default value. It must be configured to the real value.
+ # The invalid 0xFF is as its default value. It must be configured to the real value.
# @Prompt ACPI Hardware PCI Device Number
gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPciDeviceNumber | 0xFF| UINT8|0x00000012
## Defines the PCI Function Number of the PCI device that contains the BAR and Enable for ACPI hardware registers.
- # The invalid 0xFF is as its default value. It must be configured to the real value.
+ # The invalid 0xFF is as its default value. It must be configured to the real value.
# @Prompt ACPI Hardware PCI Function Number
gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPciFunctionNumber | 0xFF| UINT8|0x00000013
-
+
## Defines the PCI Register Offset of the PCI device that contains the Enable for ACPI hardware registers.
- # The invalid 0xFFFF is as its default value. It must be configured to the real value.
+ # The invalid 0xFFFF is as its default value. It must be configured to the real value.
# @Prompt ACPI Hardware PCI Register Offset
gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPciEnableRegisterOffset |0xFFFF|UINT16|0x00000014
-
+
## Defines the bit mask that must be set to enable the APIC hardware register BAR.
# @Prompt ACPI Hardware PCI Bar Enable BitMask
gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoBarEnableMask | 0x00| UINT8|0x00000015
-
+
## Defines the PCI Register Offset of the PCI device that contains the BAR for ACPI hardware registers.
- # The invalid 0xFFFF is as its default value. It must be configured to the real value.
+ # The invalid 0xFFFF is as its default value. It must be configured to the real value.
# @Prompt ACPI Hardware PCI Bar Register Offset
gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPciBarRegisterOffset |0xFFFF|UINT16|0x00000016
@@ -173,5 +174,33 @@
# @Prompt ACPI IO Port Base Address Mask
gPcAtChipsetPkgTokenSpaceGuid.PcdAcpiIoPortBaseAddressMask |0xFFFE|UINT16|0x00000018
+ ## Reset Control Register address in I/O space.
+ # @Prompt Reset Control Register address
+ gPcAtChipsetPkgTokenSpaceGuid.PcdResetControlRegister|0x64|UINT64|0x00000019
+
+ ## 8bit Reset Control Register value for cold reset.
+ # @Prompt Reset Control Register value for cold reset
+ gPcAtChipsetPkgTokenSpaceGuid.PcdResetControlValueColdReset|0xFE|UINT8|0x0000001A
+
+ ## Specifies the initial value for Register_A in RTC.
+ # @Prompt Initial value for Register_A in RTC.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterA|0x26|UINT8|0x0000001B
+
+ ## Specifies the initial value for Register_B in RTC.
+ # @Prompt Initial value for Register_B in RTC.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterB|0x02|UINT8|0x0000001C
+
+ ## Specifies the initial value for Register_D in RTC.
+ # @Prompt Initial value for Register_D in RTC.
+ gPcAtChipsetPkgTokenSpaceGuid.PcdInitialValueRtcRegisterD|0x00|UINT8|0x0000001D
+
+ ## Specifies RTC Index Register address in I/O space.
+ # @Prompt RTC Index Register address
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcIndexRegister|0x70|UINT8|0x0000001E
+
+ ## Specifies RTC Target Register address in I/O space.
+ # @Prompt RTC Target Register address
+ gPcAtChipsetPkgTokenSpaceGuid.PcdRtcTargetRegister|0x71|UINT8|0x0000001F
+
[UserExtensions.TianoCore."ExtraFiles"]
PcAtChipsetPkgExtra.uni