X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=QuarkSocPkg%2FQuarkSouthCluster%2FUsb%2FOhci%2FPei%2FOhcPeim.h;fp=QuarkSocPkg%2FQuarkSouthCluster%2FUsb%2FOhci%2FPei%2FOhcPeim.h;h=0000000000000000000000000000000000000000;hp=c34f94cdd7c815ba51c0f42437fc99cf7441cb74;hb=5347c48016f27061475fdb053e867a06ce73492f;hpb=96ef5a8e30a8da33eaab09f13cc8d752342717a5 diff --git a/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Pei/OhcPeim.h b/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Pei/OhcPeim.h deleted file mode 100644 index c34f94cdd7..0000000000 --- a/QuarkSocPkg/QuarkSouthCluster/Usb/Ohci/Pei/OhcPeim.h +++ /dev/null @@ -1,252 +0,0 @@ -/** @file -Provides the definition of Usb Hc Protocol and OHCI controller -private data structure. - -Copyright (c) 2013-2015 Intel Corporation. - -SPDX-License-Identifier: BSD-2-Clause-Patent - -**/ - - - -#ifndef _OHCI_PEIM_H -#define _OHCI_PEIM_H - -#include - -#include -#include - -#include -#include -#include -#include -#include -#include - -typedef struct _USB_OHCI_HC_DEV USB_OHCI_HC_DEV; - -#include "UsbHcMem.h" -#include "OhciReg.h" -#include "OhciSched.h" -#include "OhciUrb.h" -#include "Descriptor.h" - -#define EFI_USB_SPEED_FULL 0x0000 -#define EFI_USB_SPEED_LOW 0x0001 -#define EFI_USB_SPEED_HIGH 0x0002 - -#define PAGESIZE 4096 - -#define HC_1_MICROSECOND 1 -#define HC_1_MILLISECOND (1000 * HC_1_MICROSECOND) -#define HC_1_SECOND (1000 * HC_1_MILLISECOND) - - -#define USB_OHCI_HC_DEV_SIGNATURE SIGNATURE_32('o','h','c','i') - -struct _USB_OHCI_HC_DEV { - UINTN Signature; - PEI_USB_HOST_CONTROLLER_PPI UsbHostControllerPpi; - EFI_PEI_PPI_DESCRIPTOR PpiDescriptor; - UINT32 UsbHostControllerBaseAddress; - VOID *MemPool; -}; - -#define PEI_RECOVERY_USB_OHC_DEV_FROM_EHCI_THIS(a) CR (a, USB_OHCI_HC_DEV, UsbHostControllerPpi, USB_OHCI_HC_DEV_SIGNATURE) - -// -// Func List -// - -/** - Provides software reset for the USB host controller. - - @param PeiServices The pointer of EFI_PEI_SERVICES. - @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI. - @param Attributes A bit mask of the reset operation to perform. - - @retval EFI_SUCCESS The reset operation succeeded. - @retval EFI_INVALID_PARAMETER Attributes is not valid. - @retval EFI_UNSUPPOURTED The type of reset specified by Attributes is - not currently supported by the host controller. - @retval EFI_DEVICE_ERROR Host controller isn't halted to reset. - -**/ -EFI_STATUS -InitializeUsbHC ( - IN EFI_PEI_SERVICES **PeiServices, - IN USB_OHCI_HC_DEV *Ohc, - IN UINT16 Attributes - ); - -/** - Submits control transfer to a target USB device. - - @param PeiServices The pointer of EFI_PEI_SERVICES. - @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI. - @param DeviceAddress The target device address. - @param DeviceSpeed Target device speed. - @param MaximumPacketLength Maximum packet size the default control transfer - endpoint is capable of sending or receiving. - @param Request USB device request to send. - @param TransferDirection Specifies the data direction for the data stage. - @param Data Data buffer to be transmitted or received from USB device. - @param DataLength The size (in bytes) of the data buffer. - @param TimeOut Indicates the maximum timeout, in millisecond. - @param TransferResult Return the result of this control transfer. - - @retval EFI_SUCCESS Transfer was completed successfully. - @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resources. - @retval EFI_INVALID_PARAMETER Some parameters are invalid. - @retval EFI_TIMEOUT Transfer failed due to timeout. - @retval EFI_DEVICE_ERROR Transfer failed due to host controller or device error. - -**/ -EFI_STATUS -EFIAPI -OhciControlTransfer ( - IN EFI_PEI_SERVICES **PeiServices, - IN PEI_USB_HOST_CONTROLLER_PPI *This, - IN UINT8 DeviceAddress, - IN UINT8 DeviceSpeed, - IN UINT8 MaxPacketLength, - IN EFI_USB_DEVICE_REQUEST *Request, - IN EFI_USB_DATA_DIRECTION TransferDirection, - IN OUT VOID *Data, - IN OUT UINTN *DataLength, - IN UINTN TimeOut, - OUT UINT32 *TransferResult - ); -/** - Submits bulk transfer to a bulk endpoint of a USB device. - - @param PeiServices The pointer of EFI_PEI_SERVICES. - @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI. - @param DeviceAddress Target device address. - @param EndPointAddress Endpoint number and its direction in bit 7. - @param MaxiPacketLength Maximum packet size the endpoint is capable of - sending or receiving. - @param Data A pointers to the buffers of data to transmit - from or receive into. - @param DataLength The lenght of the data buffer. - @param DataToggle On input, the initial data toggle for the transfer; - On output, it is updated to to next data toggle to use of - the subsequent bulk transfer. - @param TimeOut Indicates the maximum time, in millisecond, which the - transfer is allowed to complete. - @param TransferResult A pointer to the detailed result information of the - bulk transfer. - - @retval EFI_SUCCESS The transfer was completed successfully. - @retval EFI_OUT_OF_RESOURCES The transfer failed due to lack of resource. - @retval EFI_INVALID_PARAMETER Parameters are invalid. - @retval EFI_TIMEOUT The transfer failed due to timeout. - @retval EFI_DEVICE_ERROR The transfer failed due to host controller error. - -**/ -EFI_STATUS -EFIAPI -OhciBulkTransfer ( - IN EFI_PEI_SERVICES **PeiServices, - IN PEI_USB_HOST_CONTROLLER_PPI *This, - IN UINT8 DeviceAddress, - IN UINT8 EndPointAddress, - IN UINT8 MaxPacketLength, - IN OUT VOID *Data, - IN OUT UINTN *DataLength, - IN OUT UINT8 *DataToggle, - IN UINTN TimeOut, - OUT UINT32 *TransferResult - ); -/** - Retrieves the number of root hub ports. - - @param[in] PeiServices The pointer to the PEI Services Table. - @param[in] This The pointer to this instance of the - PEI_USB_HOST_CONTROLLER_PPI. - @param[out] NumOfPorts The pointer to the number of the root hub ports. - - @retval EFI_SUCCESS The port number was retrieved successfully. - @retval EFI_INVALID_PARAMETER PortNumber is NULL. - -**/ - -EFI_STATUS -EFIAPI -OhciGetRootHubNumOfPorts ( - IN EFI_PEI_SERVICES **PeiServices, - IN PEI_USB_HOST_CONTROLLER_PPI *This, - OUT UINT8 *NumOfPorts - ); -/** - Retrieves the current status of a USB root hub port. - - @param PeiServices The pointer of EFI_PEI_SERVICES. - @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI. - @param PortNumber The root hub port to retrieve the state from. - @param PortStatus Variable to receive the port state. - - @retval EFI_SUCCESS The status of the USB root hub port specified. - by PortNumber was returned in PortStatus. - @retval EFI_INVALID_PARAMETER PortNumber is invalid. - -**/ - -EFI_STATUS -EFIAPI -OhciGetRootHubPortStatus ( - IN EFI_PEI_SERVICES **PeiServices, - IN PEI_USB_HOST_CONTROLLER_PPI *This, - IN UINT8 PortNumber, - OUT EFI_USB_PORT_STATUS *PortStatus - ); -/** - - Sets a feature for the specified root hub port. - - @param This A pointer to the EFI_USB_HC_PROTOCOL. - @param PortNumber Specifies the root hub port whose feature - is requested to be set. - @param PortFeature Indicates the feature selector associated - with the feature set request. - - @retval EFI_SUCCESS The feature specified by PortFeature was set for the - USB root hub port specified by PortNumber. - @retval EFI_DEVICE_ERROR Set feature failed because of hardware issue - @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid. -**/ -EFI_STATUS -EFIAPI -OhciSetRootHubPortFeature ( - IN EFI_PEI_SERVICES **PeiServices, - IN PEI_USB_HOST_CONTROLLER_PPI *This, - IN UINT8 PortNumber, - IN EFI_USB_PORT_FEATURE PortFeature - ); -/** - Clears a feature for the specified root hub port. - - @param PeiServices The pointer of EFI_PEI_SERVICES. - @param This The pointer of PEI_USB_HOST_CONTROLLER_PPI. - @param PortNumber Specifies the root hub port whose feature - is requested to be cleared. - @param PortFeature Indicates the feature selector associated with the - feature clear request. - - @retval EFI_SUCCESS The feature specified by PortFeature was cleared - for the USB root hub port specified by PortNumber. - @retval EFI_INVALID_PARAMETER PortNumber is invalid or PortFeature is invalid. - -**/ - -EFI_STATUS -EFIAPI -OhciClearRootHubPortFeature ( - IN EFI_PEI_SERVICES **PeiServices, - IN PEI_USB_HOST_CONTROLLER_PPI *This, - IN UINT8 PortNumber, - IN EFI_USB_PORT_FEATURE PortFeature - ); -#endif