X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=Vlv2TbltDevicePkg%2FInclude%2FProtocol%2FI2cBusMcg.h;fp=Vlv2TbltDevicePkg%2FInclude%2FProtocol%2FI2cBusMcg.h;h=0000000000000000000000000000000000000000;hp=1cfca218bd4f92b9fd7f67859e9599faadb8c6a1;hb=5347c48016f27061475fdb053e867a06ce73492f;hpb=96ef5a8e30a8da33eaab09f13cc8d752342717a5
diff --git a/Vlv2TbltDevicePkg/Include/Protocol/I2cBusMcg.h b/Vlv2TbltDevicePkg/Include/Protocol/I2cBusMcg.h
deleted file mode 100644
index 1cfca218bd..0000000000
--- a/Vlv2TbltDevicePkg/Include/Protocol/I2cBusMcg.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*++
-
- Copyright (c) 2004 - 2014, Intel Corporation. All rights reserved.
-
- SPDX-License-Identifier: BSD-2-Clause-Patent
-
-
-
-**/
-
-#ifndef __I2C_BUS_H__
-#define __I2C_BUS_H__
-
-#include
-
-//
-// I2C bus protocol
-//
-typedef struct _EFI_I2C_BUS_PROTOCOL EFI_I2C_BUS_PROTOCOL;
-
-/**
- Perform an I2C operation on the device
-
- This routine must be called at or below TPL_NOTIFY. For synchronous
- requests this routine must be called at or below TPL_CALLBACK.
-
- N.B. The typical consumers of this API are the third party I2C
- drivers. Extreme care must be taken by other consumers of this
- API to prevent confusing the third party I2C drivers due to a
- state change at the I2C device which the third party I2C drivers
- did not initiate. I2C platform drivers may use this API within
- these guidelines.
-
- This routine queues an operation to the I2C controller for execution
- on the I2C bus.
-
- As an upper layer driver writer, the following need to be provided
- to the platform vendor:
-
- 1. ACPI CID value or string - this is used to connect the upper layer
- driver to the device.
- 2. Slave address array guidance when the I2C device uses more than one
- slave address. This is used to access the blocks of hardware within
- the I2C device.
-
- @param[in] This Address of an EFI_I2C_BUS_PROTOCOL
- structure
- @param[in] SlaveAddressIndex Index into an array of slave addresses for
- the I2C device. The values in the array are
- specified by the board designer, with the
- I2C device driver writer providing the slave
- address order.
-
- For devices that have a single slave address,
- this value must be zero. If the I2C device
- uses more than one slave address then the third
- party (upper level) I2C driver writer needs to
- specify the order of entries in the slave address
- array.
-
- \ref ThirdPartyI2cDrivers "Third Party I2C Drivers"
- section in I2cMaster.h.
- @param[in] Event Event to set for asynchronous operations,
- NULL for synchronous operations
- @param[in] RequestPacket Address of an EFI_I2C_REQUEST_PACKET
- structure describing the I2C operation
- @param[out] I2cStatus Optional buffer to receive the I2C operation
- completion status
-
- @retval EFI_SUCCESS The operation completed successfully.
- @retval EFI_ABORTED The request did not complete because the driver
- was shutdown.
- @retval EFI_ACCESS_DENIED Invalid SlaveAddressIndex value
- @retval EFI_BAD_BUFFER_SIZE The WriteBytes or ReadBytes buffer size is too large.
- @retval EFI_DEVICE_ERROR There was an I2C error (NACK) during the operation.
- This could indicate the slave device is not present.
- @retval EFI_INVALID_PARAMETER RequestPacket is NULL
- @retval EFI_INVALID_PARAMETER TPL is too high
- @retval EFI_NO_RESPONSE The I2C device is not responding to the
- slave address. EFI_DEVICE_ERROR may also be
- returned if the controller can not distinguish
- when the NACK occurred.
- @retval EFI_NOT_FOUND I2C slave address exceeds maximum address
- @retval EFI_NOT_READY I2C bus is busy or operation pending, wait for
- the event and then read status pointed to by
- the request packet.
- @retval EFI_OUT_OF_RESOURCES Insufficient memory for I2C operation
- @retval EFI_TIMEOUT The transaction did not complete within an internally
- specified timeout period.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_I2C_BUS_START_REQUEST) (
- IN CONST EFI_I2C_BUS_PROTOCOL *This,
- IN UINTN SlaveAddressIndex,
- IN EFI_EVENT Event OPTIONAL,
- IN CONST EFI_I2C_REQUEST_PACKET *RequestPacket,
- OUT EFI_STATUS *I2cStatus OPTIONAL
- );
-
-//
-// The I2C bus protocol enables access to a specific device on the I2C bus.
-//
-// Each I2C device is described as an ACPI node (HID, UID and CID) within the
-// platform layer. The I2C bus protocol enumerates the I2C devices in the
-// platform and creates a unique handle and device path for each I2C device.
-//
-// I2C slave addressing is abstracted to validate addresses and limit operation
-// to the specified I2C device. The third party providing the I2C device support
-// provides an ordered list of slave addresses for the I2C device to the team
-// building the platform layer. The platform team must preserve the order of the
-// supplied list. SlaveAddressCount is the number of entries in this list or
-// array within the platform layer. The third party device support references
-// a slave address using an index into the list or array in the range of zero
-// to SlaveAddressCount - 1.
-//
-struct _EFI_I2C_BUS_PROTOCOL {
- //
- // Start an I2C operation on the bus
- //
- EFI_I2C_BUS_START_REQUEST StartRequest;
-
- //
- // The maximum number of slave addresses for the I2C device. The caller may
- // validate this value as a check on the platform layer's configuration. Slave
- // address selection uses an index value in the range of zero to SlaveAddressCount - 1.
- //
- UINTN SlaveAddressCount;
-
- //
- // Hardware revision - Matches the ACPI _HRV value
- //
- // The HardwareRevision value allows a single driver to support multiple hardware
- // revisions and implement the necessary workarounds for limitations within the
- // hardware.
- //
- UINT32 HardwareRevision;
-
- //
- // The maximum number of bytes the I2C host controller
- // is able to receive from the I2C bus.
- ///
- UINT32 MaximumReceiveBytes;
-
- //
- // The maximum number of bytes the I2C host controller
- // is able to send on the I2C bus.
- //
- UINT32 MaximumTransmitBytes;
-
- //
- // The maximum number of bytes in the I2C bus transaction.
- //
- UINT32 MaximumTotalBytes;
-};
-
-//
-// GUID for the I2C bus protocol
-//
-extern EFI_GUID gEfiI2cBusProtocolGuid;
-
-#endif // __I2C_BUS_H__