--- /dev/null
+/** @file\r
+ This driver module produces IDE_CONTROLLER_INIT protocol for Sata Controllers.\r
+\r
+ Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+#include "SataController.h"\r
+\r
+///\r
+/// EFI_DRIVER_BINDING_PROTOCOL instance\r
+///\r
+EFI_DRIVER_BINDING_PROTOCOL gSataControllerDriverBinding = {\r
+ SataControllerSupported,\r
+ SataControllerStart,\r
+ SataControllerStop,\r
+ 0xa,\r
+ NULL,\r
+ NULL\r
+};\r
+\r
+/**\r
+ Read AHCI Operation register.\r
+\r
+ @param PciIo The PCI IO protocol instance.\r
+ @param Offset The operation register offset.\r
+\r
+ @return The register content read.\r
+\r
+**/\r
+UINT32\r
+EFIAPI\r
+AhciReadReg (\r
+ IN EFI_PCI_IO_PROTOCOL *PciIo,\r
+ IN UINT32 Offset\r
+ )\r
+{\r
+ UINT32 Data;\r
+\r
+ ASSERT (PciIo != NULL);\r
+ \r
+ Data = 0;\r
+\r
+ PciIo->Mem.Read (\r
+ PciIo,\r
+ EfiPciIoWidthUint32,\r
+ AHCI_BAR_INDEX,\r
+ (UINT64) Offset,\r
+ 1,\r
+ &Data\r
+ );\r
+\r
+ return Data;\r
+}\r
+\r
+/**\r
+ Write AHCI Operation register.\r
+\r
+ @param PciIo The PCI IO protocol instance.\r
+ @param Offset The operation register offset.\r
+ @param Data The data used to write down.\r
+\r
+**/\r
+VOID\r
+EFIAPI\r
+AhciWriteReg (\r
+ IN EFI_PCI_IO_PROTOCOL *PciIo,\r
+ IN UINT32 Offset,\r
+ IN UINT32 Data\r
+ )\r
+{\r
+ ASSERT (PciIo != NULL);\r
+\r
+ PciIo->Mem.Write (\r
+ PciIo,\r
+ EfiPciIoWidthUint32,\r
+ AHCI_BAR_INDEX,\r
+ (UINT64) Offset,\r
+ 1,\r
+ &Data\r
+ );\r
+\r
+ return;\r
+}\r
+\r
+/**\r
+ This function is used to calculate the best PIO mode supported by specific IDE device\r
+\r
+ @param IdentifyData The identify data of specific IDE device.\r
+ @param DisPioMode Disqualified PIO modes collection.\r
+ @param SelectedMode Available PIO modes collection.\r
+\r
+ @retval EFI_SUCCESS Best PIO modes are returned.\r
+ @retval EFI_UNSUPPORTED The device doesn't support PIO mode,\r
+ or all supported modes have been disqualified.\r
+**/\r
+EFI_STATUS\r
+CalculateBestPioMode (\r
+ IN EFI_IDENTIFY_DATA *IdentifyData,\r
+ IN UINT16 *DisPioMode OPTIONAL,\r
+ OUT UINT16 *SelectedMode\r
+ )\r
+{\r
+ UINT16 PioMode;\r
+ UINT16 AdvancedPioMode;\r
+ UINT16 Temp;\r
+ UINT16 Index;\r
+ UINT16 MinimumPioCycleTime;\r
+\r
+ Temp = 0xff;\r
+\r
+ PioMode = (UINT8) (((ATA5_IDENTIFY_DATA *) (&(IdentifyData->AtaData)))->pio_cycle_timing >> 8);\r
+\r
+ //\r
+ // See whether Identify Data word 64 - 70 are valid\r
+ //\r
+ if ((IdentifyData->AtaData.field_validity & 0x02) == 0x02) {\r
+\r
+ AdvancedPioMode = IdentifyData->AtaData.advanced_pio_modes;\r
+ DEBUG ((EFI_D_INFO, "CalculateBestPioMode: AdvancedPioMode = %x\n", AdvancedPioMode));\r
+\r
+ for (Index = 0; Index < 8; Index++) {\r
+ if ((AdvancedPioMode & 0x01) != 0) {\r
+ Temp = Index;\r
+ }\r
+\r
+ AdvancedPioMode >>= 1;\r
+ }\r
+\r
+ //\r
+ // If Temp is modified, mean the advanced_pio_modes is not zero;\r
+ // if Temp is not modified, mean there is no advanced PIO mode supported,\r
+ // the best PIO Mode is the value in pio_cycle_timing.\r
+ //\r
+ if (Temp != 0xff) {\r
+ AdvancedPioMode = (UINT16) (Temp + 3);\r
+ } else {\r
+ AdvancedPioMode = PioMode;\r
+ }\r
+\r
+ //\r
+ // Limit the PIO mode to at most PIO4.\r
+ //\r
+ PioMode = (UINT16) MIN (AdvancedPioMode, 4);\r
+\r
+ MinimumPioCycleTime = IdentifyData->AtaData.min_pio_cycle_time_with_flow_control;\r
+\r
+ if (MinimumPioCycleTime <= 120) {\r
+ PioMode = (UINT16) MIN (4, PioMode);\r
+ } else if (MinimumPioCycleTime <= 180) {\r
+ PioMode = (UINT16) MIN (3, PioMode);\r
+ } else if (MinimumPioCycleTime <= 240) {\r
+ PioMode = (UINT16) MIN (2, PioMode);\r
+ } else {\r
+ PioMode = 0;\r
+ }\r
+\r
+ //\r
+ // Degrade the PIO mode if the mode has been disqualified\r
+ //\r
+ if (DisPioMode != NULL) {\r
+ if (*DisPioMode < 2) {\r
+ return EFI_UNSUPPORTED; // no mode below ATA_PIO_MODE_BELOW_2\r
+ }\r
+\r
+ if (PioMode >= *DisPioMode) {\r
+ PioMode = (UINT16) (*DisPioMode - 1);\r
+ }\r
+ }\r
+\r
+ if (PioMode < 2) {\r
+ *SelectedMode = 1; // ATA_PIO_MODE_BELOW_2;\r
+ } else {\r
+ *SelectedMode = PioMode; // ATA_PIO_MODE_2 to ATA_PIO_MODE_4;\r
+ }\r
+\r
+ } else {\r
+ //\r
+ // Identify Data word 64 - 70 are not valid\r
+ // Degrade the PIO mode if the mode has been disqualified\r
+ //\r
+ if (DisPioMode != NULL) {\r
+ if (*DisPioMode < 2) {\r
+ return EFI_UNSUPPORTED; // no mode below ATA_PIO_MODE_BELOW_2\r
+ }\r
+\r
+ if (PioMode == *DisPioMode) {\r
+ PioMode--;\r
+ }\r
+ }\r
+\r
+ if (PioMode < 2) {\r
+ *SelectedMode = 1; // ATA_PIO_MODE_BELOW_2;\r
+ } else {\r
+ *SelectedMode = 2; // ATA_PIO_MODE_2;\r
+ }\r
+\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ This function is used to calculate the best UDMA mode supported by specific IDE device\r
+\r
+ @param IdentifyData The identify data of specific IDE device.\r
+ @param DisUDmaMode Disqualified UDMA modes collection.\r
+ @param SelectedMode Available UDMA modes collection.\r
+\r
+ @retval EFI_SUCCESS Best UDMA modes are returned.\r
+ @retval EFI_UNSUPPORTED The device doesn't support UDMA mode,\r
+ or all supported modes have been disqualified.\r
+**/\r
+EFI_STATUS\r
+CalculateBestUdmaMode (\r
+ IN EFI_IDENTIFY_DATA *IdentifyData,\r
+ IN UINT16 *DisUDmaMode OPTIONAL,\r
+ OUT UINT16 *SelectedMode\r
+ )\r
+{\r
+ UINT16 TempMode;\r
+ UINT16 DeviceUDmaMode;\r
+\r
+ DeviceUDmaMode = 0;\r
+\r
+ //\r
+ // Check whether the WORD 88 (supported UltraDMA by drive) is valid\r
+ //\r
+ if ((IdentifyData->AtaData.field_validity & 0x04) == 0x00) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ DeviceUDmaMode = IdentifyData->AtaData.ultra_dma_mode;\r
+ DEBUG ((EFI_D_INFO, "CalculateBestUdmaMode: DeviceUDmaMode = %x\n", DeviceUDmaMode));\r
+ DeviceUDmaMode &= 0x3f;\r
+ TempMode = 0; // initialize it to UDMA-0\r
+\r
+ while ((DeviceUDmaMode >>= 1) != 0) {\r
+ TempMode++;\r
+ }\r
+\r
+ //\r
+ // Degrade the UDMA mode if the mode has been disqualified\r
+ //\r
+ if (DisUDmaMode != NULL) {\r
+ if (*DisUDmaMode == 0) {\r
+ *SelectedMode = 0;\r
+ return EFI_UNSUPPORTED; // no mode below ATA_UDMA_MODE_0\r
+ }\r
+\r
+ if (TempMode >= *DisUDmaMode) {\r
+ TempMode = (UINT16) (*DisUDmaMode - 1);\r
+ }\r
+ }\r
+\r
+ //\r
+ // Possible returned mode is between ATA_UDMA_MODE_0 and ATA_UDMA_MODE_5\r
+ //\r
+ *SelectedMode = TempMode;\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ The Entry Point of module. It follows the standard UEFI driver model.\r
+\r
+ @param[in] ImageHandle The firmware allocated handle for the EFI image. \r
+ @param[in] SystemTable A pointer to the EFI System Table.\r
+ \r
+ @retval EFI_SUCCESS The entry point is executed successfully.\r
+ @retval other Some error occurs when executing this entry point.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+InitializeSataControllerDriver (\r
+ IN EFI_HANDLE ImageHandle,\r
+ IN EFI_SYSTEM_TABLE *SystemTable\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+\r
+ //\r
+ // Install driver model protocol(s).\r
+ //\r
+ Status = EfiLibInstallDriverBindingComponentName2 (\r
+ ImageHandle,\r
+ SystemTable,\r
+ &gSataControllerDriverBinding,\r
+ ImageHandle,\r
+ &gSataControllerComponentName,\r
+ &gSataControllerComponentName2\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ return Status;\r
+}\r
+\r
+/**\r
+ Supported function of Driver Binding protocol for this driver.\r
+ Test to see if this driver supports ControllerHandle.\r
+\r
+ @param This Protocol instance pointer.\r
+ @param Controller Handle of device to test.\r
+ @param RemainingDevicePath A pointer to the device path.\r
+ it should be ignored by device driver.\r
+\r
+ @retval EFI_SUCCESS This driver supports this device.\r
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.\r
+ @retval other This driver does not support this device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SataControllerSupported (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ EFI_PCI_IO_PROTOCOL *PciIo;\r
+ PCI_TYPE00 PciData;\r
+\r
+ //\r
+ // Attempt to open PCI I/O Protocol\r
+ //\r
+ Status = gBS->OpenProtocol (\r
+ Controller,\r
+ &gEfiPciIoProtocolGuid,\r
+ (VOID **) &PciIo,\r
+ This->DriverBindingHandle,\r
+ Controller,\r
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+\r
+ //\r
+ // Now further check the PCI header: Base Class (offset 0x0B) and\r
+ // Sub Class (offset 0x0A). This controller should be an SATA controller\r
+ //\r
+ Status = PciIo->Pci.Read (\r
+ PciIo,\r
+ EfiPciIoWidthUint8,\r
+ PCI_CLASSCODE_OFFSET,\r
+ sizeof (PciData.Hdr.ClassCode),\r
+ PciData.Hdr.ClassCode\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ if (IS_PCI_IDE (&PciData) || IS_PCI_SATADPA (&PciData)) {\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ return EFI_UNSUPPORTED;\r
+}\r
+\r
+/**\r
+ This routine is called right after the .Supported() called and \r
+ Start this driver on ControllerHandle.\r
+\r
+ @param This Protocol instance pointer.\r
+ @param Controller Handle of device to bind driver to.\r
+ @param RemainingDevicePath A pointer to the device path.\r
+ it should be ignored by device driver.\r
+\r
+ @retval EFI_SUCCESS This driver is added to this device.\r
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.\r
+ @retval other Some error occurs when binding this driver to this device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SataControllerStart (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ EFI_PCI_IO_PROTOCOL *PciIo;\r
+ PCI_TYPE00 PciData;\r
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r
+ UINT32 Data32;\r
+ UINTN ChannelDeviceCount;\r
+\r
+ DEBUG ((EFI_D_INFO, "SataControllerStart START\n"));\r
+\r
+ SataPrivateData = NULL;\r
+\r
+ //\r
+ // Now test and open PCI I/O Protocol\r
+ //\r
+ Status = gBS->OpenProtocol (\r
+ Controller,\r
+ &gEfiPciIoProtocolGuid,\r
+ (VOID **) &PciIo,\r
+ This->DriverBindingHandle,\r
+ Controller,\r
+ EFI_OPEN_PROTOCOL_BY_DRIVER\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ DEBUG ((EFI_D_ERROR, "SataControllerStart error return status = %r\n", Status));\r
+ return Status;\r
+ }\r
+\r
+ //\r
+ // Allocate Sata Private Data structure\r
+ //\r
+ SataPrivateData = AllocateZeroPool (sizeof (EFI_SATA_CONTROLLER_PRIVATE_DATA));\r
+ if (SataPrivateData == NULL) {\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ goto Done;\r
+ }\r
+\r
+ //\r
+ // Initialize Sata Private Data\r
+ //\r
+ SataPrivateData->Signature = SATA_CONTROLLER_SIGNATURE;\r
+ SataPrivateData->PciIo = PciIo;\r
+ SataPrivateData->IdeInit.GetChannelInfo = IdeInitGetChannelInfo;\r
+ SataPrivateData->IdeInit.NotifyPhase = IdeInitNotifyPhase;\r
+ SataPrivateData->IdeInit.SubmitData = IdeInitSubmitData;\r
+ SataPrivateData->IdeInit.DisqualifyMode = IdeInitDisqualifyMode;\r
+ SataPrivateData->IdeInit.CalculateMode = IdeInitCalculateMode;\r
+ SataPrivateData->IdeInit.SetTiming = IdeInitSetTiming;\r
+ SataPrivateData->IdeInit.EnumAll = SATA_ENUMER_ALL;\r
+\r
+ Status = PciIo->Pci.Read (\r
+ PciIo,\r
+ EfiPciIoWidthUint8,\r
+ PCI_CLASSCODE_OFFSET,\r
+ sizeof (PciData.Hdr.ClassCode),\r
+ PciData.Hdr.ClassCode\r
+ );\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ if (IS_PCI_IDE (&PciData)) {\r
+ SataPrivateData->IdeInit.ChannelCount = IDE_MAX_CHANNEL;\r
+ SataPrivateData->DeviceCount = IDE_MAX_DEVICES;\r
+ } else if (IS_PCI_SATADPA (&PciData)) {\r
+ //\r
+ // Read Host Capability Register(CAP) to get Number of Ports(NPS) and Supports Port Multiplier(SPM)\r
+ // NPS is 0's based value indicating the maximum number of ports supported by the HBA silicon.\r
+ // A maximum of 32 ports can be supported. A value of '0h', indicating one port, is the minimum requirement.\r
+ //\r
+ Data32 = AhciReadReg (PciIo, R_AHCI_CAP);\r
+ SataPrivateData->IdeInit.ChannelCount = (UINT8) ((Data32 & B_AHCI_CAP_NPS) + 1);\r
+ SataPrivateData->DeviceCount = AHCI_MAX_DEVICES;\r
+ if ((Data32 & B_AHCI_CAP_SPM) == B_AHCI_CAP_SPM) {\r
+ SataPrivateData->DeviceCount = AHCI_MULTI_MAX_DEVICES;\r
+ }\r
+ }\r
+\r
+ ChannelDeviceCount = (UINTN) (SataPrivateData->IdeInit.ChannelCount) * (UINTN) (SataPrivateData->DeviceCount);\r
+ SataPrivateData->DisqualifiedModes = AllocateZeroPool ((sizeof (EFI_ATA_COLLECTIVE_MODE)) * ChannelDeviceCount);\r
+ if (SataPrivateData->DisqualifiedModes == NULL) {\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ goto Done;\r
+ }\r
+\r
+ SataPrivateData->IdentifyData = AllocateZeroPool ((sizeof (EFI_IDENTIFY_DATA)) * ChannelDeviceCount);\r
+ if (SataPrivateData->IdentifyData == NULL) {\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ goto Done;\r
+ }\r
+\r
+ SataPrivateData->IdentifyValid = AllocateZeroPool ((sizeof (BOOLEAN)) * ChannelDeviceCount);\r
+ if (SataPrivateData->IdentifyValid == NULL) {\r
+ Status = EFI_OUT_OF_RESOURCES;\r
+ goto Done;\r
+ }\r
+\r
+ //\r
+ // Install IDE Controller Init Protocol to this instance\r
+ //\r
+ Status = gBS->InstallMultipleProtocolInterfaces (\r
+ &Controller,\r
+ &gEfiIdeControllerInitProtocolGuid,\r
+ &(SataPrivateData->IdeInit),\r
+ NULL\r
+ );\r
+\r
+Done:\r
+ if (EFI_ERROR (Status)) {\r
+\r
+ gBS->CloseProtocol (\r
+ Controller,\r
+ &gEfiPciIoProtocolGuid,\r
+ This->DriverBindingHandle,\r
+ Controller\r
+ );\r
+ if (SataPrivateData != NULL) {\r
+ if (SataPrivateData->DisqualifiedModes != NULL) {\r
+ FreePool (SataPrivateData->DisqualifiedModes);\r
+ }\r
+ if (SataPrivateData->IdentifyData != NULL) {\r
+ FreePool (SataPrivateData->IdentifyData);\r
+ }\r
+ if (SataPrivateData->IdentifyValid != NULL) {\r
+ FreePool (SataPrivateData->IdentifyValid);\r
+ }\r
+ FreePool (SataPrivateData);\r
+ }\r
+ }\r
+\r
+ DEBUG ((EFI_D_INFO, "SataControllerStart END status = %r\n", Status));\r
+\r
+ return Status;\r
+}\r
+\r
+/**\r
+ Stop this driver on ControllerHandle.\r
+\r
+ @param This Protocol instance pointer.\r
+ @param Controller Handle of device to stop driver on.\r
+ @param NumberOfChildren Not used.\r
+ @param ChildHandleBuffer Not used.\r
+\r
+ @retval EFI_SUCCESS This driver is removed from this device.\r
+ @retval other Some error occurs when removing this driver from this device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SataControllerStop (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN UINTN NumberOfChildren,\r
+ IN EFI_HANDLE *ChildHandleBuffer\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL *IdeInit;\r
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r
+\r
+ //\r
+ // Open the produced protocol\r
+ //\r
+ Status = gBS->OpenProtocol (\r
+ Controller,\r
+ &gEfiIdeControllerInitProtocolGuid,\r
+ (VOID **) &IdeInit,\r
+ This->DriverBindingHandle,\r
+ Controller,\r
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (IdeInit);\r
+ ASSERT (SataPrivateData != NULL);\r
+\r
+ //\r
+ // Uninstall the IDE Controller Init Protocol from this instance\r
+ //\r
+ Status = gBS->UninstallMultipleProtocolInterfaces (\r
+ Controller,\r
+ &gEfiIdeControllerInitProtocolGuid,\r
+ &(SataPrivateData->IdeInit),\r
+ NULL\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+\r
+ if (SataPrivateData != NULL) {\r
+ if (SataPrivateData->DisqualifiedModes != NULL) {\r
+ FreePool (SataPrivateData->DisqualifiedModes);\r
+ }\r
+ if (SataPrivateData->IdentifyData != NULL) {\r
+ FreePool (SataPrivateData->IdentifyData);\r
+ }\r
+ if (SataPrivateData->IdentifyValid != NULL) {\r
+ FreePool (SataPrivateData->IdentifyValid);\r
+ }\r
+ FreePool (SataPrivateData);\r
+ }\r
+\r
+ //\r
+ // Close protocols opened by Sata Controller driver\r
+ //\r
+ return gBS->CloseProtocol (\r
+ Controller,\r
+ &gEfiPciIoProtocolGuid,\r
+ This->DriverBindingHandle,\r
+ Controller\r
+ );\r
+}\r
+\r
+/**\r
+ Calculate the flat array subscript of a (Channel, Device) pair.\r
+\r
+ @param[in] SataPrivateData The private data structure corresponding to the\r
+ SATA controller that attaches the device for\r
+ which the flat array subscript is being\r
+ calculated.\r
+\r
+ @param[in] Channel The channel (ie. port) number on the SATA\r
+ controller that the device is attached to.\r
+\r
+ @param[in] Device The device number on the channel.\r
+\r
+ @return The flat array subscript suitable for indexing DisqualifiedModes,\r
+ IdentifyData, and IdentifyValid.\r
+**/\r
+STATIC\r
+UINTN\r
+FlatDeviceIndex (\r
+ IN CONST EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData,\r
+ IN UINTN Channel,\r
+ IN UINTN Device\r
+ )\r
+{\r
+ ASSERT (SataPrivateData != NULL);\r
+ ASSERT (Channel < SataPrivateData->IdeInit.ChannelCount);\r
+ ASSERT (Device < SataPrivateData->DeviceCount);\r
+\r
+ return Channel * SataPrivateData->DeviceCount + Device;\r
+}\r
+\r
+//\r
+// Interface functions of IDE_CONTROLLER_INIT protocol\r
+//\r
+/**\r
+ Returns the information about the specified IDE channel.\r
+ \r
+ This function can be used to obtain information about a particular IDE channel.\r
+ The driver entity uses this information during the enumeration process. \r
+ \r
+ If Enabled is set to FALSE, the driver entity will not scan the channel. Note \r
+ that it will not prevent an operating system driver from scanning the channel.\r
+ \r
+ For most of today's controllers, MaxDevices will either be 1 or 2. For SATA \r
+ controllers, this value will always be 1. SATA configurations can contain SATA \r
+ port multipliers. SATA port multipliers behave like SATA bridges and can support\r
+ up to 16 devices on the other side. If a SATA port out of the IDE controller \r
+ is connected to a port multiplier, MaxDevices will be set to the number of SATA \r
+ devices that the port multiplier supports. Because today's port multipliers \r
+ support up to fifteen SATA devices, this number can be as large as fifteen. The IDE \r
+ bus driver is required to scan for the presence of port multipliers behind an SATA \r
+ controller and enumerate up to MaxDevices number of devices behind the port \r
+ multiplier. \r
+ \r
+ In this context, the devices behind a port multiplier constitute a channel. \r
+ \r
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel Zero-based channel number.\r
+ @param[out] Enabled TRUE if this channel is enabled. Disabled channels \r
+ are not scanned to see if any devices are present.\r
+ @param[out] MaxDevices The maximum number of IDE devices that the bus driver\r
+ can expect on this channel. For the ATA/ATAPI \r
+ specification, version 6, this number will either be \r
+ one or two. For Serial ATA (SATA) configurations with a \r
+ port multiplier, this number can be as large as fifteen.\r
+\r
+ @retval EFI_SUCCESS Information was returned without any errors.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitGetChannelInfo (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ OUT BOOLEAN *Enabled,\r
+ OUT UINT8 *MaxDevices\r
+ )\r
+{\r
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);\r
+ ASSERT (SataPrivateData != NULL);\r
+\r
+ if (Channel < This->ChannelCount) {\r
+ *Enabled = TRUE;\r
+ *MaxDevices = SataPrivateData->DeviceCount;\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ *Enabled = FALSE;\r
+ return EFI_INVALID_PARAMETER;\r
+}\r
+\r
+/**\r
+ The notifications from the driver entity that it is about to enter a certain\r
+ phase of the IDE channel enumeration process.\r
+ \r
+ This function can be used to notify the IDE controller driver to perform \r
+ specific actions, including any chipset-specific initialization, so that the \r
+ chipset is ready to enter the next phase. Seven notification points are defined \r
+ at this time. \r
+ \r
+ More synchronization points may be added as required in the future. \r
+\r
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Phase The phase during enumeration.\r
+ @param[in] Channel Zero-based channel number.\r
+\r
+ @retval EFI_SUCCESS The notification was accepted without any errors.\r
+ @retval EFI_UNSUPPORTED Phase is not supported.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_NOT_READY This phase cannot be entered at this time; for \r
+ example, an attempt was made to enter a Phase \r
+ without having entered one or more previous \r
+ Phase.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitNotifyPhase (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,\r
+ IN UINT8 Channel\r
+ )\r
+{\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Submits the device information to the IDE controller driver.\r
+\r
+ This function is used by the driver entity to pass detailed information about \r
+ a particular device to the IDE controller driver. The driver entity obtains \r
+ this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData\r
+ is the pointer to the response data buffer. The IdentifyData buffer is owned \r
+ by the driver entity, and the IDE controller driver must make a local copy \r
+ of the entire buffer or parts of the buffer as needed. The original IdentifyData \r
+ buffer pointer may not be valid when\r
+ \r
+ - EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or\r
+ - EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.\r
+ \r
+ The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to \r
+ compute the optimum mode for the device. These fields are not limited to the \r
+ timing information. For example, an implementation of the IDE controller driver \r
+ may examine the vendor and type/mode field to match known bad drives. \r
+ \r
+ The driver entity may submit drive information in any order, as long as it \r
+ submits information for all the devices belonging to the enumeration group \r
+ before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device\r
+ in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()\r
+ should be called with IdentifyData set to NULL. The IDE controller driver may \r
+ not have any other mechanism to know whether a device is present or not. Therefore, \r
+ setting IdentifyData to NULL does not constitute an error condition. \r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a \r
+ given (Channel, Device) pair. \r
+ \r
+ @param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel Zero-based channel number.\r
+ @param[in] Device Zero-based device number on the Channel.\r
+ @param[in] IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.\r
+\r
+ @retval EFI_SUCCESS The information was accepted without any errors.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_INVALID_PARAMETER Device is invalid.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitSubmitData (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ IN UINT8 Device,\r
+ IN EFI_IDENTIFY_DATA *IdentifyData\r
+ )\r
+{\r
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r
+ UINTN DeviceIndex;\r
+\r
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);\r
+ ASSERT (SataPrivateData != NULL);\r
+\r
+ if ((Channel >= This->ChannelCount) || (Device >= SataPrivateData->DeviceCount)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);\r
+\r
+ //\r
+ // Make a local copy of device's IdentifyData and mark the valid flag\r
+ //\r
+ if (IdentifyData != NULL) {\r
+ CopyMem (\r
+ &(SataPrivateData->IdentifyData[DeviceIndex]),\r
+ IdentifyData,\r
+ sizeof (EFI_IDENTIFY_DATA)\r
+ );\r
+\r
+ SataPrivateData->IdentifyValid[DeviceIndex] = TRUE;\r
+ } else {\r
+ SataPrivateData->IdentifyValid[DeviceIndex] = FALSE;\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Disqualifies specific modes for an IDE device.\r
+\r
+ This function allows the driver entity or other drivers (such as platform \r
+ drivers) to reject certain timing modes and request the IDE controller driver\r
+ to recalculate modes. This function allows the driver entity and the IDE \r
+ controller driver to negotiate the timings on a per-device basis. This function \r
+ is useful in the case of drives that lie about their capabilities. An example \r
+ is when the IDE device fails to accept the timing modes that are calculated \r
+ by the IDE controller driver based on the response to the Identify Drive command.\r
+\r
+ If the driver entity does not want to limit the ATA timing modes and leave that \r
+ decision to the IDE controller driver, it can either not call this function for \r
+ the given device or call this function and set the Valid flag to FALSE for all \r
+ modes that are listed in EFI_ATA_COLLECTIVE_MODE.\r
+ \r
+ The driver entity may disqualify modes for a device in any order and any number \r
+ of times.\r
+ \r
+ This function can be called multiple times to invalidate multiple modes of the \r
+ same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI \r
+ specification for more information on PIO modes. \r
+ \r
+ For Serial ATA (SATA) controllers, this member function can be used to disqualify\r
+ a higher transfer rate mode on a given channel. For example, a platform driver\r
+ may inform the IDE controller driver to not use second-generation (Gen2) speeds \r
+ for a certain SATA drive.\r
+ \r
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel The zero-based channel number.\r
+ @param[in] Device The zero-based device number on the Channel.\r
+ @param[in] BadModes The modes that the device does not support and that\r
+ should be disqualified.\r
+\r
+ @retval EFI_SUCCESS The modes were accepted without any errors.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_INVALID_PARAMETER Device is invalid.\r
+ @retval EFI_INVALID_PARAMETER IdentifyData is NULL.\r
+ \r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitDisqualifyMode (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ IN UINT8 Device,\r
+ IN EFI_ATA_COLLECTIVE_MODE *BadModes\r
+ )\r
+{\r
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r
+ UINTN DeviceIndex;\r
+\r
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);\r
+ ASSERT (SataPrivateData != NULL);\r
+\r
+ if ((Channel >= This->ChannelCount) || (BadModes == NULL) || (Device >= SataPrivateData->DeviceCount)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);\r
+\r
+ //\r
+ // Record the disqualified modes per channel per device. From ATA/ATAPI spec,\r
+ // if a mode is not supported, the modes higher than it is also not supported.\r
+ //\r
+ CopyMem (\r
+ &(SataPrivateData->DisqualifiedModes[DeviceIndex]),\r
+ BadModes,\r
+ sizeof (EFI_ATA_COLLECTIVE_MODE)\r
+ );\r
+\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Returns the information about the optimum modes for the specified IDE device.\r
+\r
+ This function is used by the driver entity to obtain the optimum ATA modes for\r
+ a specific device. The IDE controller driver takes into account the following \r
+ while calculating the mode:\r
+ - The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()\r
+ - The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()\r
+\r
+ The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() \r
+ for all the devices that belong to an enumeration group before calling \r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group. \r
+ \r
+ The IDE controller driver will use controller- and possibly platform-specific \r
+ algorithms to arrive at SupportedModes. The IDE controller may base its \r
+ decision on user preferences and other considerations as well. This function \r
+ may be called multiple times because the driver entity may renegotiate the mode \r
+ with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().\r
+ \r
+ The driver entity may collect timing information for various devices in any \r
+ order. The driver entity is responsible for making sure that all the dependencies\r
+ are satisfied. For example, the SupportedModes information for device A that \r
+ was previously returned may become stale after a call to \r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.\r
+ \r
+ The buffer SupportedModes is allocated by the callee because the caller does \r
+ not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE \r
+ is defined in a way that allows for future extensibility and can be of variable \r
+ length. This memory pool should be deallocated by the caller when it is no \r
+ longer necessary. \r
+ \r
+ The IDE controller driver for a Serial ATA (SATA) controller can use this \r
+ member function to force a lower speed (first-generation [Gen1] speeds on a \r
+ second-generation [Gen2]-capable hardware). The IDE controller driver can \r
+ also allow the driver entity to stay with the speed that has been negotiated \r
+ by the physical layer.\r
+ \r
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel A zero-based channel number.\r
+ @param[in] Device A zero-based device number on the Channel.\r
+ @param[out] SupportedModes The optimum modes for the device.\r
+\r
+ @retval EFI_SUCCESS SupportedModes was returned.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_INVALID_PARAMETER Device is invalid. \r
+ @retval EFI_INVALID_PARAMETER SupportedModes is NULL.\r
+ @retval EFI_NOT_READY Modes cannot be calculated due to a lack of \r
+ data. This error may happen if \r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() \r
+ and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData() \r
+ were not called for at least one drive in the \r
+ same enumeration group.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitCalculateMode (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ IN UINT8 Device,\r
+ OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes\r
+ )\r
+{\r
+ EFI_SATA_CONTROLLER_PRIVATE_DATA *SataPrivateData;\r
+ EFI_IDENTIFY_DATA *IdentifyData;\r
+ BOOLEAN IdentifyValid;\r
+ EFI_ATA_COLLECTIVE_MODE *DisqualifiedModes;\r
+ UINT16 SelectedMode;\r
+ EFI_STATUS Status;\r
+ UINTN DeviceIndex;\r
+\r
+ SataPrivateData = SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS (This);\r
+ ASSERT (SataPrivateData != NULL);\r
+\r
+ if ((Channel >= This->ChannelCount) || (SupportedModes == NULL) || (Device >= SataPrivateData->DeviceCount)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ *SupportedModes = AllocateZeroPool (sizeof (EFI_ATA_COLLECTIVE_MODE));\r
+ if (*SupportedModes == NULL) {\r
+ ASSERT (*SupportedModes != NULL);\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+\r
+ DeviceIndex = FlatDeviceIndex (SataPrivateData, Channel, Device);\r
+\r
+ IdentifyData = &(SataPrivateData->IdentifyData[DeviceIndex]);\r
+ IdentifyValid = SataPrivateData->IdentifyValid[DeviceIndex];\r
+ DisqualifiedModes = &(SataPrivateData->DisqualifiedModes[DeviceIndex]);\r
+\r
+ //\r
+ // Make sure we've got the valid identify data of the device from SubmitData()\r
+ //\r
+ if (!IdentifyValid) {\r
+ FreePool (*SupportedModes);\r
+ return EFI_NOT_READY;\r
+ }\r
+\r
+ Status = CalculateBestPioMode (\r
+ IdentifyData,\r
+ (DisqualifiedModes->PioMode.Valid ? ((UINT16 *) &(DisqualifiedModes->PioMode.Mode)) : NULL),\r
+ &SelectedMode\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ (*SupportedModes)->PioMode.Valid = TRUE;\r
+ (*SupportedModes)->PioMode.Mode = SelectedMode;\r
+\r
+ } else {\r
+ (*SupportedModes)->PioMode.Valid = FALSE;\r
+ }\r
+ DEBUG ((EFI_D_INFO, "IdeInitCalculateMode: PioMode = %x\n", (*SupportedModes)->PioMode.Mode));\r
+\r
+ Status = CalculateBestUdmaMode (\r
+ IdentifyData,\r
+ (DisqualifiedModes->UdmaMode.Valid ? ((UINT16 *) &(DisqualifiedModes->UdmaMode.Mode)) : NULL),\r
+ &SelectedMode\r
+ );\r
+\r
+ if (!EFI_ERROR (Status)) {\r
+ (*SupportedModes)->UdmaMode.Valid = TRUE;\r
+ (*SupportedModes)->UdmaMode.Mode = SelectedMode;\r
+\r
+ } else {\r
+ (*SupportedModes)->UdmaMode.Valid = FALSE;\r
+ }\r
+ DEBUG ((EFI_D_INFO, "IdeInitCalculateMode: UdmaMode = %x\n", (*SupportedModes)->UdmaMode.Mode));\r
+\r
+ //\r
+ // The modes other than PIO and UDMA are not supported\r
+ //\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Commands the IDE controller driver to program the IDE controller hardware\r
+ so that the specified device can operate at the specified mode.\r
+\r
+ This function is used by the driver entity to instruct the IDE controller \r
+ driver to program the IDE controller hardware to the specified modes. This \r
+ function can be called only once for a particular device. For a Serial ATA \r
+ (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-\r
+ specific programming may be required.\r
+\r
+ @param[in] This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel Zero-based channel number.\r
+ @param[in] Device Zero-based device number on the Channel.\r
+ @param[in] Modes The modes to set.\r
+\r
+ @retval EFI_SUCCESS The command was accepted without any errors.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_INVALID_PARAMETER Device is invalid.\r
+ @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.\r
+ @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.\r
+ The driver entity should not use this device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitSetTiming (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ IN UINT8 Device,\r
+ IN EFI_ATA_COLLECTIVE_MODE *Modes\r
+ )\r
+{\r
+ return EFI_SUCCESS;\r
+}\r
--- /dev/null
+/** @file\r
+ Header file for Sata Controller driver.\r
+\r
+ Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+#ifndef _SATA_CONTROLLER_H_\r
+#define _SATA_CONTROLLER_H_\r
+\r
+#include <Uefi.h>\r
+#include <Protocol/ComponentName.h>\r
+#include <Protocol/DriverBinding.h>\r
+#include <Protocol/PciIo.h>\r
+#include <Protocol/IdeControllerInit.h>\r
+#include <Library/UefiDriverEntryPoint.h>\r
+#include <Library/DebugLib.h>\r
+#include <Library/UefiLib.h>\r
+#include <Library/BaseLib.h>\r
+#include <Library/BaseMemoryLib.h>\r
+#include <Library/MemoryAllocationLib.h>\r
+#include <Library/UefiBootServicesTableLib.h>\r
+#include <IndustryStandard/Pci.h>\r
+\r
+//\r
+// Global Variables definitions\r
+//\r
+extern EFI_DRIVER_BINDING_PROTOCOL gSataControllerDriverBinding;\r
+extern EFI_COMPONENT_NAME_PROTOCOL gSataControllerComponentName;\r
+extern EFI_COMPONENT_NAME2_PROTOCOL gSataControllerComponentName2;\r
+\r
+#define AHCI_BAR_INDEX 0x05\r
+#define R_AHCI_CAP 0x0\r
+#define B_AHCI_CAP_NPS (BIT4 | BIT3 | BIT2 | BIT1 | BIT0) // Number of Ports\r
+#define B_AHCI_CAP_SPM BIT17 // Supports Port Multiplier\r
+\r
+///\r
+/// AHCI each channel can have up to 1 device\r
+///\r
+#define AHCI_MAX_DEVICES 0x01\r
+\r
+///\r
+/// AHCI each channel can have 15 devices in the presence of a multiplier\r
+///\r
+#define AHCI_MULTI_MAX_DEVICES 0x0F\r
+\r
+///\r
+/// IDE supports 2 channel max\r
+///\r
+#define IDE_MAX_CHANNEL 0x02\r
+\r
+///\r
+/// IDE supports 2 devices max\r
+///\r
+#define IDE_MAX_DEVICES 0x02\r
+\r
+#define SATA_ENUMER_ALL FALSE\r
+\r
+//\r
+// Sata Controller driver private data structure\r
+//\r
+\r
+#define SATA_CONTROLLER_SIGNATURE SIGNATURE_32('S','A','T','A')\r
+\r
+typedef struct _EFI_SATA_CONTROLLER_PRIVATE_DATA {\r
+ //\r
+ // Standard signature used to identify Sata Controller private data\r
+ //\r
+ UINT32 Signature;\r
+\r
+ //\r
+ // Protocol instance of IDE_CONTROLLER_INIT produced by this driver\r
+ //\r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL IdeInit;\r
+\r
+ //\r
+ // Copy of protocol pointers used by this driver\r
+ //\r
+ EFI_PCI_IO_PROTOCOL *PciIo;\r
+\r
+ //\r
+ // The number of devices that are supported by this channel\r
+ //\r
+ UINT8 DeviceCount;\r
+\r
+ //\r
+ // The highest disqulified mode for each attached device,\r
+ // From ATA/ATAPI spec, if a mode is not supported,\r
+ // the modes higher than it is also not supported\r
+ //\r
+ EFI_ATA_COLLECTIVE_MODE *DisqualifiedModes;\r
+\r
+ //\r
+ // A copy of EFI_IDENTIFY_DATA data for each attached SATA device and its flag\r
+ //\r
+ EFI_IDENTIFY_DATA *IdentifyData;\r
+ BOOLEAN *IdentifyValid;\r
+} EFI_SATA_CONTROLLER_PRIVATE_DATA;\r
+\r
+#define SATA_CONTROLLER_PRIVATE_DATA_FROM_THIS(a) CR(a, EFI_SATA_CONTROLLER_PRIVATE_DATA, IdeInit, SATA_CONTROLLER_SIGNATURE)\r
+\r
+//\r
+// Driver binding functions declaration\r
+//\r
+/**\r
+ Supported function of Driver Binding protocol for this driver.\r
+ Test to see if this driver supports ControllerHandle.\r
+\r
+ @param This Protocol instance pointer.\r
+ @param Controller Handle of device to test.\r
+ @param RemainingDevicePath A pointer to the device path. Should be ignored by\r
+ device driver.\r
+\r
+ @retval EFI_SUCCESS This driver supports this device.\r
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.\r
+ @retval other This driver does not support this device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SataControllerSupported (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
+ )\r
+;\r
+\r
+/**\r
+ This routine is called right after the .Supported() called and \r
+ Start this driver on ControllerHandle.\r
+\r
+ @param This Protocol instance pointer.\r
+ @param Controller Handle of device to bind driver to.\r
+ @param RemainingDevicePath A pointer to the device path. Should be ignored by\r
+ device driver.\r
+\r
+ @retval EFI_SUCCESS This driver is added to this device.\r
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.\r
+ @retval other Some error occurs when binding this driver to this device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SataControllerStart (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath\r
+ )\r
+;\r
+\r
+/**\r
+ Stop this driver on ControllerHandle.\r
+\r
+ @param This Protocol instance pointer.\r
+ @param Controller Handle of device to stop driver on.\r
+ @param NumberOfChildren Not used.\r
+ @param ChildHandleBuffer Not used.\r
+\r
+ @retval EFI_SUCCESS This driver is removed from this device.\r
+ @retval other Some error occurs when removing this driver from this device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SataControllerStop (\r
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,\r
+ IN EFI_HANDLE Controller,\r
+ IN UINTN NumberOfChildren,\r
+ IN EFI_HANDLE *ChildHandleBuffer\r
+ )\r
+;\r
+\r
+//\r
+// IDE controller init functions declaration\r
+//\r
+/**\r
+ Returns the information about the specified IDE channel.\r
+ \r
+ This function can be used to obtain information about a particular IDE channel.\r
+ The driver entity uses this information during the enumeration process. \r
+ \r
+ If Enabled is set to FALSE, the driver entity will not scan the channel. Note \r
+ that it will not prevent an operating system driver from scanning the channel.\r
+ \r
+ For most of today's controllers, MaxDevices will either be 1 or 2. For SATA \r
+ controllers, this value will always be 1. SATA configurations can contain SATA \r
+ port multipliers. SATA port multipliers behave like SATA bridges and can support\r
+ up to 16 devices on the other side. If a SATA port out of the IDE controller \r
+ is connected to a port multiplier, MaxDevices will be set to the number of SATA \r
+ devices that the port multiplier supports. Because today's port multipliers \r
+ support up to fifteen SATA devices, this number can be as large as fifteen. The IDE \r
+ bus driver is required to scan for the presence of port multipliers behind an SATA \r
+ controller and enumerate up to MaxDevices number of devices behind the port \r
+ multiplier. \r
+ \r
+ In this context, the devices behind a port multiplier constitute a channel. \r
+ \r
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel Zero-based channel number.\r
+ @param[out] Enabled TRUE if this channel is enabled. Disabled channels \r
+ are not scanned to see if any devices are present.\r
+ @param[out] MaxDevices The maximum number of IDE devices that the bus driver\r
+ can expect on this channel. For the ATA/ATAPI \r
+ specification, version 6, this number will either be \r
+ one or two. For Serial ATA (SATA) configurations with a \r
+ port multiplier, this number can be as large as fifteen.\r
+\r
+ @retval EFI_SUCCESS Information was returned without any errors.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitGetChannelInfo (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ OUT BOOLEAN *Enabled,\r
+ OUT UINT8 *MaxDevices\r
+ )\r
+;\r
+\r
+/**\r
+ The notifications from the driver entity that it is about to enter a certain\r
+ phase of the IDE channel enumeration process.\r
+ \r
+ This function can be used to notify the IDE controller driver to perform \r
+ specific actions, including any chipset-specific initialization, so that the \r
+ chipset is ready to enter the next phase. Seven notification points are defined \r
+ at this time. \r
+ \r
+ More synchronization points may be added as required in the future. \r
+\r
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Phase The phase during enumeration.\r
+ @param[in] Channel Zero-based channel number.\r
+\r
+ @retval EFI_SUCCESS The notification was accepted without any errors.\r
+ @retval EFI_UNSUPPORTED Phase is not supported.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_NOT_READY This phase cannot be entered at this time; for \r
+ example, an attempt was made to enter a Phase \r
+ without having entered one or more previous \r
+ Phase.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitNotifyPhase (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN EFI_IDE_CONTROLLER_ENUM_PHASE Phase,\r
+ IN UINT8 Channel\r
+ )\r
+;\r
+\r
+/**\r
+ Submits the device information to the IDE controller driver.\r
+\r
+ This function is used by the driver entity to pass detailed information about \r
+ a particular device to the IDE controller driver. The driver entity obtains \r
+ this information by issuing an ATA or ATAPI IDENTIFY_DEVICE command. IdentifyData\r
+ is the pointer to the response data buffer. The IdentifyData buffer is owned \r
+ by the driver entity, and the IDE controller driver must make a local copy \r
+ of the entire buffer or parts of the buffer as needed. The original IdentifyData \r
+ buffer pointer may not be valid when\r
+ \r
+ - EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() or\r
+ - EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() is called at a later point.\r
+ \r
+ The IDE controller driver may consult various fields of EFI_IDENTIFY_DATA to \r
+ compute the optimum mode for the device. These fields are not limited to the \r
+ timing information. For example, an implementation of the IDE controller driver \r
+ may examine the vendor and type/mode field to match known bad drives. \r
+ \r
+ The driver entity may submit drive information in any order, as long as it \r
+ submits information for all the devices belonging to the enumeration group \r
+ before EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() is called for any device\r
+ in that enumeration group. If a device is absent, EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()\r
+ should be called with IdentifyData set to NULL. The IDE controller driver may \r
+ not have any other mechanism to know whether a device is present or not. Therefore, \r
+ setting IdentifyData to NULL does not constitute an error condition. \r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() can be called only once for a \r
+ given (Channel, Device) pair. \r
+ \r
+ @param[in] This A pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel Zero-based channel number.\r
+ @param[in] Device Zero-based device number on the Channel.\r
+ @param[in] IdentifyData The device's response to the ATA IDENTIFY_DEVICE command.\r
+\r
+ @retval EFI_SUCCESS The information was accepted without any errors.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_INVALID_PARAMETER Device is invalid.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitSubmitData (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ IN UINT8 Device,\r
+ IN EFI_IDENTIFY_DATA *IdentifyData\r
+ )\r
+;\r
+\r
+/**\r
+ Disqualifies specific modes for an IDE device.\r
+\r
+ This function allows the driver entity or other drivers (such as platform \r
+ drivers) to reject certain timing modes and request the IDE controller driver\r
+ to recalculate modes. This function allows the driver entity and the IDE \r
+ controller driver to negotiate the timings on a per-device basis. This function \r
+ is useful in the case of drives that lie about their capabilities. An example \r
+ is when the IDE device fails to accept the timing modes that are calculated \r
+ by the IDE controller driver based on the response to the Identify Drive command.\r
+\r
+ If the driver entity does not want to limit the ATA timing modes and leave that \r
+ decision to the IDE controller driver, it can either not call this function for \r
+ the given device or call this function and set the Valid flag to FALSE for all \r
+ modes that are listed in EFI_ATA_COLLECTIVE_MODE.\r
+ \r
+ The driver entity may disqualify modes for a device in any order and any number \r
+ of times.\r
+ \r
+ This function can be called multiple times to invalidate multiple modes of the \r
+ same type (e.g., Programmed Input/Output [PIO] modes 3 and 4). See the ATA/ATAPI \r
+ specification for more information on PIO modes. \r
+ \r
+ For Serial ATA (SATA) controllers, this member function can be used to disqualify\r
+ a higher transfer rate mode on a given channel. For example, a platform driver\r
+ may inform the IDE controller driver to not use second-generation (Gen2) speeds \r
+ for a certain SATA drive.\r
+ \r
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel The zero-based channel number.\r
+ @param[in] Device The zero-based device number on the Channel.\r
+ @param[in] BadModes The modes that the device does not support and that\r
+ should be disqualified.\r
+\r
+ @retval EFI_SUCCESS The modes were accepted without any errors.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_INVALID_PARAMETER Device is invalid.\r
+ @retval EFI_INVALID_PARAMETER IdentifyData is NULL.\r
+ \r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitDisqualifyMode (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ IN UINT8 Device,\r
+ IN EFI_ATA_COLLECTIVE_MODE *BadModes\r
+ )\r
+;\r
+\r
+/**\r
+ Returns the information about the optimum modes for the specified IDE device.\r
+\r
+ This function is used by the driver entity to obtain the optimum ATA modes for\r
+ a specific device. The IDE controller driver takes into account the following \r
+ while calculating the mode:\r
+ - The IdentifyData inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData()\r
+ - The BadModes inputs to EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode()\r
+\r
+ The driver entity is required to call EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() \r
+ for all the devices that belong to an enumeration group before calling \r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.CalculateMode() for any device in the same group. \r
+ \r
+ The IDE controller driver will use controller- and possibly platform-specific \r
+ algorithms to arrive at SupportedModes. The IDE controller may base its \r
+ decision on user preferences and other considerations as well. This function \r
+ may be called multiple times because the driver entity may renegotiate the mode \r
+ with the IDE controller driver using EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode().\r
+ \r
+ The driver entity may collect timing information for various devices in any \r
+ order. The driver entity is responsible for making sure that all the dependencies\r
+ are satisfied. For example, the SupportedModes information for device A that \r
+ was previously returned may become stale after a call to \r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyMode() for device B.\r
+ \r
+ The buffer SupportedModes is allocated by the callee because the caller does \r
+ not necessarily know the size of the buffer. The type EFI_ATA_COLLECTIVE_MODE \r
+ is defined in a way that allows for future extensibility and can be of variable \r
+ length. This memory pool should be deallocated by the caller when it is no \r
+ longer necessary. \r
+ \r
+ The IDE controller driver for a Serial ATA (SATA) controller can use this \r
+ member function to force a lower speed (first-generation [Gen1] speeds on a \r
+ second-generation [Gen2]-capable hardware). The IDE controller driver can \r
+ also allow the driver entity to stay with the speed that has been negotiated \r
+ by the physical layer.\r
+ \r
+ @param[in] This The pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel A zero-based channel number.\r
+ @param[in] Device A zero-based device number on the Channel.\r
+ @param[out] SupportedModes The optimum modes for the device.\r
+\r
+ @retval EFI_SUCCESS SupportedModes was returned.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_INVALID_PARAMETER Device is invalid. \r
+ @retval EFI_INVALID_PARAMETER SupportedModes is NULL.\r
+ @retval EFI_NOT_READY Modes cannot be calculated due to a lack of \r
+ data. This error may happen if \r
+ EFI_IDE_CONTROLLER_INIT_PROTOCOL.SubmitData() \r
+ and EFI_IDE_CONTROLLER_INIT_PROTOCOL.DisqualifyData() \r
+ were not called for at least one drive in the \r
+ same enumeration group.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitCalculateMode (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ IN UINT8 Device,\r
+ OUT EFI_ATA_COLLECTIVE_MODE **SupportedModes\r
+ )\r
+;\r
+\r
+/**\r
+ Commands the IDE controller driver to program the IDE controller hardware\r
+ so that the specified device can operate at the specified mode.\r
+\r
+ This function is used by the driver entity to instruct the IDE controller \r
+ driver to program the IDE controller hardware to the specified modes. This \r
+ function can be called only once for a particular device. For a Serial ATA \r
+ (SATA) Advanced Host Controller Interface (AHCI) controller, no controller-\r
+ specific programming may be required.\r
+\r
+ @param[in] This Pointer to the EFI_IDE_CONTROLLER_INIT_PROTOCOL instance.\r
+ @param[in] Channel Zero-based channel number.\r
+ @param[in] Device Zero-based device number on the Channel.\r
+ @param[in] Modes The modes to set.\r
+\r
+ @retval EFI_SUCCESS The command was accepted without any errors.\r
+ @retval EFI_INVALID_PARAMETER Channel is invalid (Channel >= ChannelCount).\r
+ @retval EFI_INVALID_PARAMETER Device is invalid.\r
+ @retval EFI_NOT_READY Modes cannot be set at this time due to lack of data.\r
+ @retval EFI_DEVICE_ERROR Modes cannot be set due to hardware failure.\r
+ The driver entity should not use this device.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+IdeInitSetTiming (\r
+ IN EFI_IDE_CONTROLLER_INIT_PROTOCOL *This,\r
+ IN UINT8 Channel,\r
+ IN UINT8 Device,\r
+ IN EFI_ATA_COLLECTIVE_MODE *Modes\r
+ )\r
+;\r
+\r
+//\r
+// Forward reference declaration\r
+//\r
+/**\r
+ Retrieves a Unicode string that is the user readable name of the UEFI Driver.\r
+\r
+ @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.\r
+ @param Language A pointer to a three character ISO 639-2 language identifier.\r
+ This is the language of the driver name that that the caller\r
+ is requesting, and it must match one of the languages specified\r
+ in SupportedLanguages. The number of languages supported by a\r
+ driver is up to the driver writer.\r
+ @param DriverName A pointer to the Unicode string to return. This Unicode string\r
+ is the name of the driver specified by This in the language\r
+ specified by Language.\r
+\r
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by This\r
+ and the language specified by Language was returned\r
+ in DriverName.\r
+ @retval EFI_INVALID_PARAMETER Language is NULL.\r
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.\r
+ @retval EFI_UNSUPPORTED The driver specified by This does not support the\r
+ language specified by Language.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SataControllerComponentNameGetDriverName (\r
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,\r
+ IN CHAR8 *Language,\r
+ OUT CHAR16 **DriverName\r
+ )\r
+;\r
+\r
+/**\r
+ Retrieves a Unicode string that is the user readable name of the controller\r
+ that is being managed by an UEFI Driver.\r
+\r
+ @param This A pointer to the EFI_COMPONENT_NAME_PROTOCOL instance.\r
+ @param ControllerHandle The handle of a controller that the driver specified by\r
+ This is managing. This handle specifies the controller\r
+ whose name is to be returned.\r
+ @param OPTIONAL ChildHandle The handle of the child controller to retrieve the name\r
+ of. This is an optional parameter that may be NULL. It\r
+ will be NULL for device drivers. It will also be NULL\r
+ for a bus drivers that wish to retrieve the name of the\r
+ bus controller. It will not be NULL for a bus driver\r
+ that wishes to retrieve the name of a child controller.\r
+ @param Language A pointer to a three character ISO 639-2 language\r
+ identifier. This is the language of the controller name\r
+ that that the caller is requesting, and it must match one\r
+ of the languages specified in SupportedLanguages. The\r
+ number of languages supported by a driver is up to the\r
+ driver writer.\r
+ @param ControllerName A pointer to the Unicode string to return. This Unicode\r
+ string is the name of the controller specified by\r
+ ControllerHandle and ChildHandle in the language\r
+ specified by Language from the point of view of the\r
+ driver specified by This.\r
+\r
+ @retval EFI_SUCCESS The Unicode string for the user readable name in the\r
+ language specified by Language for the driver\r
+ specified by This was returned in DriverName.\r
+ @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.\r
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid\r
+ EFI_HANDLE.\r
+ @retval EFI_INVALID_PARAMETER Language is NULL.\r
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.\r
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently\r
+ managing the controller specified by\r
+ ControllerHandle and ChildHandle.\r
+ @retval EFI_UNSUPPORTED The driver specified by This does not support the\r
+ language specified by Language.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+SataControllerComponentNameGetControllerName (\r
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,\r
+ IN EFI_HANDLE ControllerHandle,\r
+ IN EFI_HANDLE ChildHandle OPTIONAL,\r
+ IN CHAR8 *Language,\r
+ OUT CHAR16 **ControllerName\r
+ )\r
+;\r
+\r
+#endif\r
projects / mirror_edk2.git / commitdiff