/** @file\r
The application to show the Boot Manager Menu.\r
\r
-Copyright (c) 2011 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
if (IsSetupMode) {\r
//\r
- // The requried resolution and text mode is setup mode.\r
+ // The required resolution and text mode is setup mode.\r
//\r
NewHorizontalResolution = mSetupHorizontalResolution;\r
NewVerticalResolution = mSetupVerticalResolution;\r
return EFI_SUCCESS;\r
} else {\r
//\r
- // If current text mode is different from requried text mode. Set new video mode\r
+ // If current text mode is different from required text mode. Set new video mode\r
//\r
for (Index = 0; Index < MaxTextMode; Index++) {\r
Status = SimpleTextOut->QueryMode (SimpleTextOut, Index, &CurrentColumn, &CurrentRow);\r
}\r
if (Index == MaxTextMode) {\r
//\r
- // If requried text mode is not supported, return error.\r
+ // If required text mode is not supported, return error.\r
//\r
FreePool (Info);\r
return EFI_UNSUPPORTED;\r
\r
if (IsSetupMode) {\r
//\r
- // The requried resolution and text mode is setup mode.\r
+ // The required resolution and text mode is setup mode.\r
//\r
NewHorizontalResolution = mSetupHorizontalResolution;\r
NewVerticalResolution = mSetupVerticalResolution;\r
return EFI_SUCCESS;\r
} else {\r
//\r
- // If current text mode is different from requried text mode. Set new video mode\r
+ // If current text mode is different from required text mode. Set new video mode\r
//\r
for (Index = 0; Index < MaxTextMode; Index++) {\r
Status = SimpleTextOut->QueryMode (SimpleTextOut, Index, &CurrentColumn, &CurrentRow);\r
}\r
if (Index == MaxTextMode) {\r
//\r
- // If requried text mode is not supported, return error.\r
+ // If required text mode is not supported, return error.\r
//\r
FreePool (Info);\r
return EFI_UNSUPPORTED;\r
Controller and installs the ISA Host Controller Service Binding protocol\r
on the ISA Host Controller's handle.\r
\r
- Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>\r
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
\r
Routine procedures for memory allocate/free.\r
\r
-Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
Bit = ((ToFree - Block->BufHost) / USBHC_MEM_UNIT) % 8;\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Count = 0; Count < (AllocSize / USBHC_MEM_UNIT); Count++) {\r
ASSERT (USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));\r
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid\r
which is used to enable recovery function from USB Drivers.\r
\r
-Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions\r
Bit = ((ToFree - Block->Buf) / USBHC_MEM_UNIT) % 8;\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Count = 0; Count < (AllocSize / USBHC_MEM_UNIT); Count++) {\r
ASSERT (USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));\r
/** @file\r
PCI eunmeration implementation on entire PCI bus system for PCI Bus module.\r
\r
-Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
(C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
@param Mem64ResStatus Status of 64-bit memory resource node.\r
@param PMem64ResStatus Status of 64-bit Prefetchable memory resource node.\r
\r
- @retval EFI_SUCCESS Successfully adjusted resoruce on host bridge.\r
+ @retval EFI_SUCCESS Successfully adjusted resource on host bridge.\r
@retval EFI_ABORTED Host bridge hasn't this resource type or no resource be adjusted.\r
\r
**/\r
}\r
\r
/**\r
- Summary requests for all resource type, and contruct ACPI resource\r
+ Summary requests for all resource type, and construct ACPI resource\r
requestor instance.\r
\r
@param Bridge detecting bridge\r
@param Config Output buffer holding new constructed APCI resource requestor\r
\r
@retval EFI_SUCCESS Successfully constructed ACPI resource.\r
- @retval EFI_OUT_OF_RESOURCES No memory availabe.\r
+ @retval EFI_OUT_OF_RESOURCES No memory available.\r
\r
**/\r
EFI_STATUS\r
/** @file\r
PCI bus enumeration logic function declaration for PCI bus module.\r
\r
-Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
@param Mem64ResStatus Status of 64-bit memory resource node.\r
@param PMem64ResStatus Status of 64-bit Prefetchable memory resource node.\r
\r
- @retval EFI_SUCCESS Successfully adjusted resoruce on host bridge.\r
+ @retval EFI_SUCCESS Successfully adjusted resource on host bridge.\r
@retval EFI_ABORTED Host bridge hasn't this resource type or no resource be adjusted.\r
\r
**/\r
);\r
\r
/**\r
- Summary requests for all resource type, and contruct ACPI resource\r
+ Summary requests for all resource type, and construct ACPI resource\r
requestor instance.\r
\r
@param Bridge detecting bridge\r
@param Config Output buffer holding new constructed APCI resource requestor\r
\r
@retval EFI_SUCCESS Successfully constructed ACPI resource.\r
- @retval EFI_OUT_OF_RESOURCES No memory availabe.\r
+ @retval EFI_OUT_OF_RESOURCES No memory available.\r
\r
**/\r
EFI_STATUS\r
}\r
\r
//\r
- // Based on the all the resource tree, contruct ACPI resource node to\r
+ // Based on the all the resource tree, construct ACPI resource node to\r
// submit the resource aperture to pci host bridge protocol\r
//\r
Status = ConstructAcpiResourceRequestor (\r
/** @file\r
Header file for PciSioSerial Driver\r
\r
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
);\r
\r
/**\r
- Reads and writes all avaliable data.\r
+ Reads and writes all available data.\r
\r
@param SerialDevice The device to flush\r
\r
}\r
\r
/**\r
- Reads and writes all avaliable data.\r
+ Reads and writes all available data.\r
\r
@param SerialDevice The device to transmit.\r
\r
\r
The routine procedure for uhci memory allocate/free.\r
\r
-Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
Bit = ((ToFree - Block->Buf) / USBHC_MEM_UNIT) % 8;\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Count = 0; Count < (AllocSize / USBHC_MEM_UNIT); Count++) {\r
ASSERT (USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));\r
PEIM to produce gPeiUsbHostControllerPpiGuid based on gPeiUsbControllerPpiGuid\r
which is used to enable recovery function from USB Drivers.\r
\r
-Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved. <BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved. <BR>\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions\r
StartBitPos = (UINT8) (((Pool - TempHeaderPtr->MemoryBlockPtr) / 32) % 8);\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Index = StartBytePos, Index2 = StartBitPos, Count = 0; Count < (RealAllocSize / 32); Count++) {\r
\r
\r
Routine procedures for memory allocate/free.\r
\r
-Copyright (c) 2013 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
Bit = ((ToFree - Block->BufHost) / USBHC_MEM_UNIT) % 8;\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Count = 0; Count < (AllocSize / USBHC_MEM_UNIT); Count++) {\r
ASSERT (USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));\r
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid\r
which is used to enable recovery function from USB Drivers.\r
\r
-Copyright (c) 2014 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2014 - 2016, Intel Corporation. All rights reserved.<BR>\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions\r
Bit = ((ToFree - Block->BufHost) / USBHC_MEM_UNIT) % 8;\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Count = 0; Count < (AllocSize / USBHC_MEM_UNIT); Count++) {\r
ASSERT (USB_HC_BIT_IS_SET (Block->Bits[Byte], Bit));\r
/** @file\r
\r
-Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions\r
Bit = ((ToFree - Block->Buf) / EMMC_PEIM_MEM_UNIT) % 8;\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Count = 0; Count < (AllocSize / EMMC_PEIM_MEM_UNIT); Count++) {\r
ASSERT (EMMC_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit));\r
/** @file\r
\r
-Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions\r
Bit = ((ToFree - Block->Buf) / SD_PEIM_MEM_UNIT) % 8;\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Count = 0; Count < (AllocSize / SD_PEIM_MEM_UNIT); Count++) {\r
ASSERT (SD_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit));\r
/** @file\r
\r
-Copyright (c) 2014, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2014 - 2016, Intel Corporation. All rights reserved.<BR>\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions\r
Bit = ((ToFree - Block->Buf) / UFS_PEIM_MEM_UNIT) % 8;\r
\r
//\r
- // reset associated bits in bit arry\r
+ // reset associated bits in bit array\r
//\r
for (Count = 0; Count < (AllocSize / UFS_PEIM_MEM_UNIT); Count++) {\r
ASSERT (UFS_PEIM_MEM_BIT_IS_SET (Block->Bits[Byte], Bit));\r
non-null on input, then the buffer is caller\r
allocated. If Buffer is NULL, then the buffer\r
is callee allocated. In either case, the\r
- requried buffer size is returned in *BufferSize.\r
+ required buffer size is returned in *BufferSize.\r
@param BufferSize On input, indicates the size of *Buffer if\r
*Buffer is non-null on input. On output,\r
indicates the required size (allocated size if\r
/** @file\r
Core image handling services to load and unload PeImage.\r
\r
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
return EFI_SUCCESS;\r
}\r
/**\r
- To check memory usage bit map arry to figure out if the memory range the image will be loaded in is available or not. If \r
- memory range is avaliable, the function will mark the correponding bits to 1 which indicates the memory range is used.\r
+ To check memory usage bit map array to figure out if the memory range the image will be loaded in is available or not. If\r
+ memory range is available, the function will mark the corresponding bits to 1 which indicates the memory range is used.\r
The function is only invoked when load modules at fixed address feature is enabled. \r
\r
- @param ImageBase The base addres the image will be loaded at.\r
+ @param ImageBase The base address the image will be loaded at.\r
@param ImageSize The size of the image\r
\r
@retval EFI_SUCCESS The memory range the image will be loaded in is available\r
}\r
/**\r
\r
- Get the fixed loadding address from image header assigned by build tool. This function only be called\r
+ Get the fixed loading address from image header assigned by build tool. This function only be called\r
when Loading module at Fixed address feature enabled.\r
\r
@param ImageContext Pointer to the image context structure that describes the PE/COFF\r
image that needs to be examined by this function.\r
@retval EFI_SUCCESS An fixed loading address is assigned to this image by build tools .\r
- @retval EFI_NOT_FOUND The image has no assigned fixed loadding address.\r
+ @retval EFI_NOT_FOUND The image has no assigned fixed loading address.\r
\r
**/\r
EFI_STATUS\r
// Build tool will save the address in PointerToRelocations & PointerToLineNumbers fields in the first section header\r
// that doesn't point to code section in image header, as well as ImageBase field of image header. And there is an \r
// assumption that when the feature is enabled, if a module is assigned a loading address by tools, PointerToRelocations \r
- // & PointerToLineNumbers fields should NOT be Zero, or else, these 2 fileds should be set to Zero\r
+ // & PointerToLineNumbers fields should NOT be Zero, or else, these 2 fields should be set to Zero\r
//\r
ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);\r
if (ValueInSectionHeader != 0) {\r
ImageContext->ImageAddress = gLoadModuleAtFixAddressConfigurationTable.DxeCodeTopAddress + (INT64)(INTN)ImageContext->ImageAddress;\r
}\r
//\r
- // Check if the memory range is avaliable.\r
+ // Check if the memory range is available.\r
//\r
Status = CheckAndMarkFixLoadingMemoryUsageBitMap (ImageContext->ImageAddress, (UINTN)(ImageContext->ImageSize + ImageContext->SectionAlignment));\r
}\r
3) A support protocol is not found, and the data is not available to be read\r
without it. This results in EFI_PROTOCOL_ERROR.\r
\r
-Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
non-null on input, then the buffer is caller\r
allocated. If Buffer is NULL, then the buffer\r
is callee allocated. In either case, the\r
- requried buffer size is returned in *BufferSize.\r
+ required buffer size is returned in *BufferSize.\r
@param BufferSize On input, indicates the size of *Buffer if\r
*Buffer is non-null on input. On output,\r
indicates the required size (allocated size if\r
return EFI_SUCCESS;\r
}\r
/**\r
- To check memory usage bit map arry to figure out if the memory range the image will be loaded in is available or not. If \r
- memory range is avaliable, the function will mark the correponding bits to 1 which indicates the memory range is used.\r
+ To check memory usage bit map array to figure out if the memory range the image will be loaded in is available or not. If\r
+ memory range is available, the function will mark the corresponding bits to 1 which indicates the memory range is used.\r
The function is only invoked when load modules at fixed address feature is enabled. \r
\r
@param Private Pointer to the private data passed in from caller\r
- @param ImageBase The base addres the image will be loaded at.\r
+ @param ImageBase The base address the image will be loaded at.\r
@param ImageSize The size of the image\r
\r
@retval EFI_SUCCESS The memory range the image will be loaded in is available\r
}\r
/**\r
\r
- Get the fixed loadding address from image header assigned by build tool. This function only be called\r
+ Get the fixed loading address from image header assigned by build tool. This function only be called\r
when Loading module at Fixed address feature enabled.\r
\r
@param ImageContext Pointer to the image context structure that describes the PE/COFF\r
@param Private Pointer to the private data passed in from caller\r
\r
@retval EFI_SUCCESS An fixed loading address is assigned to this image by build tools .\r
- @retval EFI_NOT_FOUND The image has no assigned fixed loadding address.\r
+ @retval EFI_NOT_FOUND The image has no assigned fixed loading address.\r
\r
**/\r
EFI_STATUS\r
EFI_STATUS Status;\r
EFI_IMAGE_SECTION_HEADER SectionHeader;\r
EFI_IMAGE_OPTIONAL_HEADER_UNION *ImgHdr;\r
- EFI_PHYSICAL_ADDRESS FixLoaddingAddress;\r
+ EFI_PHYSICAL_ADDRESS FixLoadingAddress;\r
UINT16 Index;\r
UINTN Size;\r
UINT16 NumberOfSections;\r
UINT64 ValueInSectionHeader;\r
\r
\r
- FixLoaddingAddress = 0;\r
+ FixLoadingAddress = 0;\r
Status = EFI_NOT_FOUND;\r
\r
//\r
ImgHdr = (EFI_IMAGE_OPTIONAL_HEADER_UNION *)((CHAR8* )ImageContext->Handle + ImageContext->PeCoffHeaderOffset);\r
if (ImageContext->IsTeImage) {\r
//\r
- // for TE image, the fix loadding address is saved in first section header that doesn't point\r
+ // for TE image, the fix loading address is saved in first section header that doesn't point\r
// to code section.\r
//\r
SectionHeaderOffset = sizeof (EFI_TE_IMAGE_HEADER);\r
// for XIP PEIM, ImageBase field holds the image base address running on the Flash. And PointerToRelocations & PointerToLineNumbers\r
// hold the image base address when it is shadow to the memory. And there is an assumption that when the feature is enabled, if a\r
// module is assigned a loading address by tools, PointerToRelocations & PointerToLineNumbers fields should NOT be Zero, or\r
- // else, these 2 fileds should be set to Zero\r
+ // else, these 2 fields should be set to Zero\r
//\r
ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);\r
if (ValueInSectionHeader != 0) {\r
if ((INT64)PcdGet64(PcdLoadModuleAtFixAddressEnable) > 0) {\r
//\r
// When LMFA feature is configured as Load Module at Fixed Absolute Address mode, PointerToRelocations & PointerToLineNumbers field\r
- // hold the absolute address of image base runing in memory\r
+ // hold the absolute address of image base running in memory\r
//\r
- FixLoaddingAddress = ValueInSectionHeader;\r
+ FixLoadingAddress = ValueInSectionHeader;\r
} else {\r
//\r
// When LMFA feature is configured as Load Module at Fixed offset mode, PointerToRelocations & PointerToLineNumbers field\r
// hold the offset relative to a platform-specific top address.\r
//\r
- FixLoaddingAddress = (EFI_PHYSICAL_ADDRESS)(Private->LoadModuleAtFixAddressTopAddress + (INT64)ValueInSectionHeader);\r
+ FixLoadingAddress = (EFI_PHYSICAL_ADDRESS)(Private->LoadModuleAtFixAddressTopAddress + (INT64)ValueInSectionHeader);\r
}\r
//\r
- // Check if the memory range is avaliable.\r
+ // Check if the memory range is available.\r
//\r
- Status = CheckAndMarkFixLoadingMemoryUsageBitMap (Private, FixLoaddingAddress, (UINT32) ImageContext->ImageSize);\r
+ Status = CheckAndMarkFixLoadingMemoryUsageBitMap (Private, FixLoadingAddress, (UINT32) ImageContext->ImageSize);\r
if (!EFI_ERROR(Status)) {\r
//\r
- // The assigned address is valid. Return the specified loadding address\r
+ // The assigned address is valid. Return the specified loading address\r
//\r
- ImageContext->ImageAddress = FixLoaddingAddress;\r
+ ImageContext->ImageAddress = FixLoadingAddress;\r
}\r
}\r
break;\r
}\r
SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);\r
}\r
- DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address 0x%11p. Status= %r \n", (VOID *)(UINTN)FixLoaddingAddress, Status));\r
+ DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address 0x%11p. Status= %r \n", (VOID *)(UINTN)FixLoadingAddress, Status));\r
return Status;\r
}\r
/**\r
Depex - Dependency Expresion.\r
\r
Copyright (c) 2014, Hewlett-Packard Development Company, L.P.\r
- Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>\r
+ Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials are licensed and made available \r
under the terms and conditions of the BSD License which accompanies this \r
distribution. The full text of the license may be found at \r
\r
//\r
// The global variable is defined for Loading modules at fixed address feature to track the SMM code\r
-// memory range usage. It is a bit mapped array in which every bit indicates the correspoding \r
+// memory range usage. It is a bit mapped array in which every bit indicates the corresponding\r
// memory page available or not. \r
//\r
GLOBAL_REMOVE_IF_UNREFERENCED UINT64 *mSmmCodeMemoryRangeUsageBitMap=NULL;\r
\r
/**\r
- To check memory usage bit map array to figure out if the memory range in which the image will be loaded is available or not. If \r
- memory range is avaliable, the function will mark the correponding bits to 1 which indicates the memory range is used.\r
+ To check memory usage bit map array to figure out if the memory range in which the image will be loaded is available or not. If\r
+ memory range is available, the function will mark the corresponding bits to 1 which indicates the memory range is used.\r
The function is only invoked when load modules at fixed address feature is enabled. \r
\r
- @param ImageBase The base addres the image will be loaded at.\r
+ @param ImageBase The base address the image will be loaded at.\r
@param ImageSize The size of the image\r
\r
@retval EFI_SUCCESS The memory range the image will be loaded in is available\r
return EFI_SUCCESS; \r
}\r
/**\r
- Get the fixed loadding address from image header assigned by build tool. This function only be called \r
+ Get the fixed loading address from image header assigned by build tool. This function only be called\r
when Loading module at Fixed address feature enabled.\r
\r
@param ImageContext Pointer to the image context structure that describes the PE/COFF\r
image that needs to be examined by this function.\r
@retval EFI_SUCCESS An fixed loading address is assigned to this image by build tools .\r
- @retval EFI_NOT_FOUND The image has no assigned fixed loadding address.\r
+ @retval EFI_NOT_FOUND The image has no assigned fixed loading address.\r
\r
**/\r
EFI_STATUS\r
IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext\r
)\r
{\r
- UINTN SectionHeaderOffset;\r
- EFI_STATUS Status;\r
- EFI_IMAGE_SECTION_HEADER SectionHeader;\r
- EFI_IMAGE_OPTIONAL_HEADER_UNION *ImgHdr;\r
- EFI_PHYSICAL_ADDRESS FixLoaddingAddress;\r
- UINT16 Index;\r
- UINTN Size; \r
- UINT16 NumberOfSections;\r
- UINT64 ValueInSectionHeader;\r
- \r
- FixLoaddingAddress = 0;\r
- Status = EFI_NOT_FOUND;\r
- \r
- //\r
- // Get PeHeader pointer\r
- //\r
- ImgHdr = (EFI_IMAGE_OPTIONAL_HEADER_UNION *)((CHAR8* )ImageContext->Handle + ImageContext->PeCoffHeaderOffset);\r
- SectionHeaderOffset = (UINTN)(\r
+ UINTN SectionHeaderOffset;\r
+ EFI_STATUS Status;\r
+ EFI_IMAGE_SECTION_HEADER SectionHeader;\r
+ EFI_IMAGE_OPTIONAL_HEADER_UNION *ImgHdr;\r
+ EFI_PHYSICAL_ADDRESS FixLoadingAddress;\r
+ UINT16 Index;\r
+ UINTN Size;\r
+ UINT16 NumberOfSections;\r
+ UINT64 ValueInSectionHeader;\r
+\r
+ FixLoadingAddress = 0;\r
+ Status = EFI_NOT_FOUND;\r
+\r
+ //\r
+ // Get PeHeader pointer\r
+ //\r
+ ImgHdr = (EFI_IMAGE_OPTIONAL_HEADER_UNION *)((CHAR8* )ImageContext->Handle + ImageContext->PeCoffHeaderOffset);\r
+ SectionHeaderOffset = (UINTN)(\r
ImageContext->PeCoffHeaderOffset +\r
sizeof (UINT32) +\r
sizeof (EFI_IMAGE_FILE_HEADER) +\r
ImgHdr->Pe32.FileHeader.SizeOfOptionalHeader\r
);\r
- NumberOfSections = ImgHdr->Pe32.FileHeader.NumberOfSections;\r
- \r
- //\r
- // Get base address from the first section header that doesn't point to code section.\r
- //\r
- for (Index = 0; Index < NumberOfSections; Index++) {\r
- //\r
- // Read section header from file\r
- //\r
- Size = sizeof (EFI_IMAGE_SECTION_HEADER);\r
- Status = ImageContext->ImageRead (\r
+ NumberOfSections = ImgHdr->Pe32.FileHeader.NumberOfSections;\r
+\r
+ //\r
+ // Get base address from the first section header that doesn't point to code section.\r
+ //\r
+ for (Index = 0; Index < NumberOfSections; Index++) {\r
+ //\r
+ // Read section header from file\r
+ //\r
+ Size = sizeof (EFI_IMAGE_SECTION_HEADER);\r
+ Status = ImageContext->ImageRead (\r
ImageContext->Handle,\r
SectionHeaderOffset,\r
&Size,\r
&SectionHeader\r
);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- \r
- Status = EFI_NOT_FOUND;\r
- \r
- if ((SectionHeader.Characteristics & EFI_IMAGE_SCN_CNT_CODE) == 0) {\r
- //\r
- // Build tool will save the address in PointerToRelocations & PointerToLineNumbers fields in the first section header \r
- // that doesn't point to code section in image header.So there is an assumption that when the feature is enabled,\r
- // if a module with a loading address assigned by tools, the PointerToRelocations & PointerToLineNumbers fields\r
- // should not be Zero, or else, these 2 fileds should be set to Zero\r
- //\r
- ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);\r
- if (ValueInSectionHeader != 0) {\r
- //\r
- // Found first section header that doesn't point to code section in which uild tool saves the\r
- // offset to SMRAM base as image base in PointerToRelocations & PointerToLineNumbers fields\r
- // \r
- FixLoaddingAddress = (EFI_PHYSICAL_ADDRESS)(gLoadModuleAtFixAddressSmramBase + (INT64)ValueInSectionHeader);\r
- //\r
- // Check if the memory range is avaliable.\r
- //\r
- Status = CheckAndMarkFixLoadingMemoryUsageBitMap (FixLoaddingAddress, (UINTN)(ImageContext->ImageSize + ImageContext->SectionAlignment));\r
- if (!EFI_ERROR(Status)) {\r
- //\r
- // The assigned address is valid. Return the specified loadding address\r
- //\r
- ImageContext->ImageAddress = FixLoaddingAddress;\r
- }\r
- }\r
- break; \r
- }\r
- SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER); \r
- }\r
- DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address %x, Status = %r\n", FixLoaddingAddress, Status));\r
- return Status;\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+\r
+ Status = EFI_NOT_FOUND;\r
+\r
+ if ((SectionHeader.Characteristics & EFI_IMAGE_SCN_CNT_CODE) == 0) {\r
+ //\r
+ // Build tool will save the address in PointerToRelocations & PointerToLineNumbers fields in the first section header\r
+ // that doesn't point to code section in image header.So there is an assumption that when the feature is enabled,\r
+ // if a module with a loading address assigned by tools, the PointerToRelocations & PointerToLineNumbers fields\r
+ // should not be Zero, or else, these 2 fields should be set to Zero\r
+ //\r
+ ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);\r
+ if (ValueInSectionHeader != 0) {\r
+ //\r
+ // Found first section header that doesn't point to code section in which build tool saves the\r
+ // offset to SMRAM base as image base in PointerToRelocations & PointerToLineNumbers fields\r
+ //\r
+ FixLoadingAddress = (EFI_PHYSICAL_ADDRESS)(gLoadModuleAtFixAddressSmramBase + (INT64)ValueInSectionHeader);\r
+ //\r
+ // Check if the memory range is available.\r
+ //\r
+ Status = CheckAndMarkFixLoadingMemoryUsageBitMap (FixLoadingAddress, (UINTN)(ImageContext->ImageSize + ImageContext->SectionAlignment));\r
+ if (!EFI_ERROR(Status)) {\r
+ //\r
+ // The assigned address is valid. Return the specified loading address\r
+ //\r
+ ImageContext->ImageAddress = FixLoadingAddress;\r
+ }\r
+ }\r
+ break;\r
+ }\r
+ SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);\r
+ }\r
+ DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address %x, Status = %r\n", FixLoadingAddress, Status));\r
+ return Status;\r
}\r
/**\r
Loads an EFI image into SMRAM.\r
or if gEfiEventReadyToBootGuid is signalled. This function unregisters the \r
Software SMIs that are nor required after SMRAM is locked and installs the \r
SMM Ready To Lock Protocol so SMM Drivers are informed that SMRAM is about \r
- to be locked. It also verifies the the SMM CPU I/O 2 Protocol has been installed\r
+ to be locked. It also verifies the SMM CPU I/O 2 Protocol has been installed\r
and NULLs gBS and gST because they can not longer be used after SMRAM is locked.\r
\r
@param DispatchHandle The unique handle assigned to this handler by SmiHandlerRegister().\r
//\r
SMM_IPL_EVENT_NOTIFICATION mSmmIplEvents[] = {\r
//\r
- // Declare protocol notification on the SMM Configuration protocol. When this notification is etablished, \r
+ // Declare protocol notification on the SMM Configuration protocol. When this notification is established,\r
// the associated event is immediately signalled, so the notification function will be executed and the \r
// SMM Configuration Protocol will be found if it is already in the handle database.\r
//\r
//\r
{ TRUE, TRUE, &gEfiDxeSmmReadyToLockProtocolGuid, SmmIplReadyToLockEventNotify, &gEfiDxeSmmReadyToLockProtocolGuid, TPL_CALLBACK, NULL },\r
//\r
- // Declare event notification on EndOfDxe event. When this notification is etablished, \r
+ // Declare event notification on EndOfDxe event. When this notification is established,\r
// the associated event is immediately signalled, so the notification function will be executed and the \r
// SMM End Of Dxe Protocol will be found if it is already in the handle database.\r
//\r
}\r
\r
/**\r
- Get the fixed loadding address from image header assigned by build tool. This function only be called\r
+ Get the fixed loading address from image header assigned by build tool. This function only be called\r
when Loading module at Fixed address feature enabled.\r
\r
@param ImageContext Pointer to the image context structure that describes the PE/COFF\r
image that needs to be examined by this function.\r
@retval EFI_SUCCESS An fixed loading address is assigned to this image by build tools .\r
- @retval EFI_NOT_FOUND The image has no assigned fixed loadding address.\r
+ @retval EFI_NOT_FOUND The image has no assigned fixed loading address.\r
**/\r
EFI_STATUS\r
GetPeCoffImageFixLoadingAssignedAddress(\r
EFI_STATUS Status;\r
EFI_IMAGE_SECTION_HEADER SectionHeader;\r
EFI_IMAGE_OPTIONAL_HEADER_UNION *ImgHdr;\r
- EFI_PHYSICAL_ADDRESS FixLoaddingAddress;\r
+ EFI_PHYSICAL_ADDRESS FixLoadingAddress;\r
UINT16 Index;\r
UINTN Size;\r
UINT16 NumberOfSections;\r
//\r
SmmCodeSize = EFI_PAGES_TO_SIZE (PcdGet32(PcdLoadFixAddressSmmCodePageNumber));\r
\r
- FixLoaddingAddress = 0;\r
+ FixLoadingAddress = 0;\r
Status = EFI_NOT_FOUND;\r
SmramBase = mCurrentSmramRange->CpuStart;\r
//\r
// Build tool saves the offset to SMRAM base as image base in PointerToRelocations & PointerToLineNumbers fields in the\r
// first section header that doesn't point to code section in image header. And there is an assumption that when the\r
// feature is enabled, if a module is assigned a loading address by tools, PointerToRelocations & PointerToLineNumbers\r
- // fields should NOT be Zero, or else, these 2 fileds should be set to Zero\r
+ // fields should NOT be Zero, or else, these 2 fields should be set to Zero\r
//\r
ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);\r
if (ValueInSectionHeader != 0) {\r
//\r
- // Found first section header that doesn't point to code section in which uild tool saves the\r
+ // Found first section header that doesn't point to code section in which build tool saves the\r
// offset to SMRAM base as image base in PointerToRelocations & PointerToLineNumbers fields\r
//\r
- FixLoaddingAddress = (EFI_PHYSICAL_ADDRESS)(SmramBase + (INT64)ValueInSectionHeader);\r
+ FixLoadingAddress = (EFI_PHYSICAL_ADDRESS)(SmramBase + (INT64)ValueInSectionHeader);\r
\r
- if (SmramBase + SmmCodeSize > FixLoaddingAddress && SmramBase <= FixLoaddingAddress) {\r
+ if (SmramBase + SmmCodeSize > FixLoadingAddress && SmramBase <= FixLoadingAddress) {\r
//\r
- // The assigned address is valid. Return the specified loadding address\r
+ // The assigned address is valid. Return the specified loading address\r
//\r
- ImageContext->ImageAddress = FixLoaddingAddress;\r
+ ImageContext->ImageAddress = FixLoadingAddress;\r
Status = EFI_SUCCESS;\r
}\r
}\r
}\r
SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);\r
}\r
- DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address %x, Status = %r \n", FixLoaddingAddress, Status));\r
+ DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address %x, Status = %r \n", FixLoadingAddress, Status));\r
return Status;\r
}\r
/**\r
}\r
CurrentSmramRangesIndex = 0;\r
//\r
- // If Loadding Module At fixed Address feature is enabled, cache the SMRAM base here\r
+ // If Loading Module At fixed Address feature is enabled, cache the SMRAM base here\r
//\r
if (PcdGet64(PcdLoadModuleAtFixAddressEnable) != 0) {\r
//\r
/** @file\r
EBC VM Test protocol for test purposes.\r
\r
-Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions\r
@param[in] This A pointer to the EFI_EBC_VM_TEST_PROTOCOL structure.\r
@param[in] AsmText A pointer to EBC ASM text code.\r
@param[out] Buffer Buffer to store the instruction.\r
- @param[out] BufferLen Size of buffer that is requried to store data.\r
+ @param[out] BufferLen Size of buffer that is required to store data.\r
\r
@retval EFI_UNSUPPORTED This functionality is unsupported.\r
@retval EFI_SUCCESS Successfully convert AsmText to the instruction. \r
@param[in] This A pointer to the EFI_EBC_VM_TEST_PROTOCOL structure.\r
@param[out] AsmText Contain the disasm text.\r
@param[out] Buffer Buffer to store the instruction.\r
- @param[out] BufferLen Size of buffer that is requried to store data.\r
+ @param[out] BufferLen Size of buffer that is required to store data.\r
\r
@retval EFI_UNSUPPORTED This functionality is unsupported.\r
@retval EFI_SUCCESS Successfully dump the executed instruction.\r
\r
if (IsSetupMode) {\r
//\r
- // The requried resolution and text mode is setup mode.\r
+ // The required resolution and text mode is setup mode.\r
//\r
NewHorizontalResolution = mBmmSetupHorizontalResolution;\r
NewVerticalResolution = mBmmSetupVerticalResolution;\r
return EFI_SUCCESS;\r
} else {\r
//\r
- // If current text mode is different from requried text mode. Set new video mode\r
+ // If current text mode is different from required text mode. Set new video mode\r
//\r
for (Index = 0; Index < MaxTextMode; Index++) {\r
Status = SimpleTextOut->QueryMode (SimpleTextOut, Index, &CurrentColumn, &CurrentRow);\r
}\r
if (Index == MaxTextMode) {\r
//\r
- // If requried text mode is not supported, return error.\r
+ // If required text mode is not supported, return error.\r
//\r
FreePool (Info);\r
return EFI_UNSUPPORTED;\r
\r
if (IsSetupMode) {\r
//\r
- // The requried resolution and text mode is setup mode.\r
+ // The required resolution and text mode is setup mode.\r
//\r
NewHorizontalResolution = mBmSetupHorizontalResolution;\r
NewVerticalResolution = mBmSetupVerticalResolution;\r
return EFI_SUCCESS;\r
} else {\r
//\r
- // If current text mode is different from requried text mode. Set new video mode\r
+ // If current text mode is different from required text mode. Set new video mode\r
//\r
for (Index = 0; Index < MaxTextMode; Index++) {\r
Status = SimpleTextOut->QueryMode (SimpleTextOut, Index, &CurrentColumn, &CurrentRow);\r
}\r
if (Index == MaxTextMode) {\r
//\r
- // If requried text mode is not supported, return error.\r
+ // If required text mode is not supported, return error.\r
//\r
FreePool (Info);\r
return EFI_UNSUPPORTED;\r
never removed. Such design ensures sytem function well during none console\r
device situation.\r
\r
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
(C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
\r
//\r
// Find the intersection of the two set of modes. If they actually intersect, the\r
- // correponding entry in the map table is set to 1.\r
+ // corresponding entry in the map table is set to 1.\r
//\r
Mode = 0;\r
while (Mode < ConOutMaxMode) {\r
/** @file\r
ARP driver functions.\r
\r
-Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at<BR>\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
/** @file\r
ARP driver header file.\r
\r
-Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at<BR>\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
/** @file\r
\r
-Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
/** @file\r
Header for the DHCP4 driver.\r
\r
-Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
/** @file\r
\r
-Copyright (c) 2005 - 2012, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2005 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
);\r
\r
//\r
-// Function ptototypes for the ServiceBinding Prococol\r
+// Function prototypes for the ServiceBinding Protocol\r
//\r
/**\r
Creates a child handle and installs a protocol.\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
/** @file\r
Definition for IP4 pesudo interface structure.\r
\r
-Copyright (c) 2005 - 2015, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2005 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
//\r
// IP address and subnet mask of the interface. It also contains\r
- // the subnet/net broadcast address for quick access. The fileds\r
+ // the subnet/net broadcast address for quick access. The fields\r
// are invalid if (Configured == FALSE)\r
//\r
IP4_ADDR Ip;\r
/** @file\r
Implementation of driver entry point and driver binding protocol.\r
\r
-Copyright (c) 2005 - 2012, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2005 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions\r
of the BSD License which accompanies this distribution. The full\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to\r
create the child.\r
@retval Others The child handle was not created.\r
\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to\r
create the child.\r
@retval Others The child handle was not created.\r
\r
\r
if (MnpDeviceData->RxNbufCache == NULL) {\r
//\r
- // No availabe buffer in the buffer pool.\r
+ // No available buffer in the buffer pool.\r
//\r
return EFI_DEVICE_ERROR;\r
}\r
/** @file\r
Tcp driver function.\r
\r
-Copyright (c) 2005 - 2014, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2005 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child.\r
@retval other The child handle was not created.\r
\r
/** @file\r
Tcp driver function header.\r
\r
-Copyright (c) 2005 - 2014, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2005 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child.\r
@retval other The child handle was not created.\r
\r
/** @file\r
TCP output process routines.\r
\r
-Copyright (c) 2005 - 2010, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2005 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
//\r
// If SYN is set and out of the range, clear the flag.\r
- // Becuase the sequence of the first byte is SEG.SEQ+1,\r
+ // Because the sequence of the first byte is SEG.SEQ+1,\r
// adjust Offset by -1. If SYN is in the range, copy\r
// one byte less.\r
//\r
/** @file\r
\r
-Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
/** @file\r
\r
-Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
\r
@retval EFI_SUCCES The protocol was added to ChildHandle.\r
@retval EFI_INVALID_PARAMETER ChildHandle is NULL.\r
- @retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create\r
the child\r
@retval other The child handle was not created\r
\r
);\r
\r
/**\r
- This function demultiplexes the received udp datagram to the apropriate instances.\r
+ This function demultiplexes the received udp datagram to the appropriate instances.\r
\r
@param[in] Udp4Service Pointer to the udp service context data.\r
- @param[in] NetSession Pointer to the EFI_NET_SESSION_DATA abstrated from\r
+ @param[in] NetSession Pointer to the EFI_NET_SESSION_DATA abstracted from\r
the received datagram.\r
@param[in] Packet Pointer to the buffer containing the received udp\r
datagram.\r
\r
\r
/**\r
- This function demultiplexes the received udp datagram to the apropriate instances.\r
+ This function demultiplexes the received udp datagram to the appropriate instances.\r
\r
@param[in] Udp4Service Pointer to the udp service context data.\r
- @param[in] NetSession Pointer to the EFI_NET_SESSION_DATA abstrated from\r
+ @param[in] NetSession Pointer to the EFI_NET_SESSION_DATA abstracted from\r
the received datagram.\r
@param[in] Packet Pointer to the buffer containing the received udp\r
datagram.\r
IpSender = IpIoFindSender (&IpIo, NetSession->IpVersion, &NetSession->Dest);\r
if (IpSender == NULL) {\r
//\r
- // No apropriate sender, since we cannot send out the ICMP message through\r
+ // No appropriate sender, since we cannot send out the ICMP message through\r
// the default zero station address IP instance, abort.\r
//\r
return;\r
IpHdr = NetSession->IpHdr.Ip4Hdr;\r
\r
//\r
- // Calculate the requried length of the icmp error message.\r
+ // Calculate the required length of the icmp error message.\r
//\r
Len = sizeof (IP4_ICMP_ERROR_HEAD) + (EFI_IP4_HEADER_LEN (IpHdr) -\r
sizeof (IP4_HEAD)) + ICMP_ERROR_PACKET_LENGTH;\r
projects / mirror_edk2.git / commitdiff