-/** @file\r
- This file declares Firmware Volume Block protocol.\r
-\r
- Low level firmware device access routines to abstract firmware device\r
- hardware.\r
-\r
- Copyright (c) 2007, Intel Corporation\r
- All rights reserved. This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
- Module Name: FirmwareVolumeBlock.h\r
-\r
- @par Revision Reference:\r
- This protocol is defined in Framework of EFI Firmware Volume Block specification.\r
- Version 0.9\r
-\r
-**/\r
-\r
-#ifndef _FIRMWARE_VOLUME_BLOCK_H_\r
-#define _FIRMWARE_VOLUME_BLOCK_H_\r
-\r
-#include <PiDxe.h>\r
-\r
-#define EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL_GUID \\r
- { \\r
- 0xDE28BC59, 0x6228, 0x41BD, {0xBD, 0xF6, 0xA3, 0xB9, 0xAD, 0xB5, 0x8D, 0xA1 } \\r
- }\r
-\r
-typedef struct _EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL;\r
-\r
-/**\r
- Retrieves Volume attributes. No polarity translations are done.\r
-\r
- @param This Calling context\r
- @param Attributes output buffer which contains attributes\r
-\r
- @retval EFI_INVALID_PARAMETER\r
- @retval EFI_SUCCESS\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_FVB_GET_ATTRIBUTES) (\r
- IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,\r
- OUT EFI_FVB_ATTRIBUTES *Attributes\r
- )\r
-;\r
-\r
-/**\r
- Sets Volume attributes. No polarity translations are done.\r
-\r
- @param This Calling context\r
- @param Attributes On input: contains new attributes\r
- On output: contains current attributes of FV\r
-\r
- @retval EFI_INVALID_PARAMETER\r
- @retval EFI_SUCCESS\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_FVB_SET_ATTRIBUTES) (\r
- IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,\r
- IN OUT EFI_FVB_ATTRIBUTES *Attributes\r
- )\r
-;\r
-\r
-/**\r
- Retrieves the physical address of a memory mapped FV.\r
-\r
- @param This Calling context\r
- @param Attributes Address is a pointer to a caller allocated EFI_PHYSICAL_ADDRESS\r
- that on successful return from GetPhysicalAddress() contains the\r
- base address of the firmware volume.\r
-\r
- @retval EFI_UNSUPPORTED\r
- @retval EFI_SUCCESS\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_FVB_GET_PHYSICAL_ADDRESS) (\r
- IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,\r
- OUT EFI_PHYSICAL_ADDRESS *Address\r
- )\r
-;\r
-\r
-/**\r
- Retrieves the size in bytes of a specific block within an FV.\r
-\r
- @param This Calling context.\r
- @param Lba Indicates which block to return the size for.\r
- @param BlockSize BlockSize is a pointer to a caller allocated\r
- UINTN in which the size of the block is returned.\r
- @param NumberOfBlocks NumberOfBlocks is a pointer to a caller allocated\r
- UINTN in which the number of consecutive blocks\r
- starting with Lba is returned. All blocks in this\r
- range have a size of BlockSize.\r
-\r
- @retval EFI_INVALID_PARAMETER\r
- @retval EFI_SUCCESS\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_FVB_GET_BLOCK_SIZE) (\r
- IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,\r
- IN EFI_LBA Lba,\r
- OUT UINTN *BlockSize,\r
- OUT UINTN *NumberOfBlocks\r
- )\r
-;\r
-\r
-/**\r
- Reads data beginning at Lba:Offset from FV and places the data in Buffer.\r
- The read terminates either when *NumBytes of data have been read, or when\r
- a block boundary is reached. *NumBytes is updated to reflect the actual\r
- number of bytes read.\r
-\r
- @param This Calling context\r
- @param Lba Block in which to begin read\r
- @param Offset Offset in the block at which to begin read\r
- @param NumBytes At input, indicates the requested read size. At output, indicates\r
- the actual number of bytes read.\r
- @param Buffer Data buffer in which to place data read.\r
-\r
- @retval EFI_INVALID_PARAMETER\r
- @retval EFI_NOT_FOUND\r
- @retval EFI_DEVICE_ERROR\r
- @retval EFI_SUCCESS\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_FVB_READ) (\r
- IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,\r
- IN EFI_LBA Lba,\r
- IN UINTN Offset,\r
- IN OUT UINTN *NumBytes,\r
- OUT UINT8 *Buffer\r
- )\r
-;\r
-\r
-/**\r
- Writes data beginning at Lba:Offset from FV. The write terminates either\r
- when *NumBytes of data have been written, or when a block boundary is\r
- reached. *NumBytes is updated to reflect the actual number of bytes\r
- written.\r
-\r
- @param This Calling context\r
- @param Lba Block in which to begin write\r
- @param Offset Offset in the block at which to begin write\r
- @param NumBytes At input, indicates the requested write size. At output, indicates\r
- the actual number of bytes written.\r
- @param Buffer Buffer containing source data for the write.\r
-\r
- @retval EFI_INVALID_PARAMETER\r
- @retval EFI_NOT_FOUND\r
- @retval EFI_DEVICE_ERROR\r
- @retval EFI_SUCCESS\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_FVB_WRITE) (\r
- IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,\r
- IN EFI_LBA Lba,\r
- IN UINTN Offset,\r
- IN OUT UINTN *NumBytes,\r
- IN UINT8 *Buffer\r
- )\r
-;\r
-\r
-#define EFI_LBA_LIST_TERMINATOR 0xFFFFFFFFFFFFFFFFULL\r
-\r
-/**\r
- The EraseBlock() function erases one or more blocks as denoted by the\r
- variable argument list. The entire parameter list of blocks must be verified\r
- prior to erasing any blocks. If a block is requested that does not exist\r
- within the associated firmware volume (it has a larger index than the last\r
- block of the firmware volume), the EraseBlock() function must return\r
- EFI_INVALID_PARAMETER without modifying the contents of the firmware volume.\r
-\r
- @param This Calling context\r
- @param ... Starting LBA followed by Number of Lba to erase. a -1 to terminate\r
- the list.\r
-\r
- @retval EFI_INVALID_PARAMETER\r
- @retval EFI_DEVICE_ERROR\r
- @retval EFI_SUCCESS\r
- @retval EFI_ACCESS_DENIED\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_FVB_ERASE_BLOCKS) (\r
- IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *This,\r
- ...\r
- )\r
-;\r
-\r
-/**\r
- @par Protocol Description:\r
- This protocol provides control over block-oriented firmware devices.\r
- Typically, the FFS (or an alternate file system) driver consumes the\r
- Firmware Volume Block Protocol and produces the Firmware Volume Protocol.\r
-\r
- @param GetAttributes\r
- Retrieves the current volume attributes.\r
-\r
- @param SetAttributes\r
- Sets the current volume attributes.\r
-\r
- @param GetPhysicalAddress\r
- Retrieves the memory-mapped address of the firmware volume.\r
-\r
- @param GetBlockSize\r
- Retrieves the size for a specific block.\r
-\r
- @param Read\r
- Reads n bytes into a buffer from the firmware volume hardware.\r
-\r
- @param Write\r
- Writes n bytes from a buffer into the firmware volume hardware.\r
-\r
- @param EraseBlocks\r
- Erases specified block(s) and sets all values as indicated by\r
- the EFI_FVB_ERASE_POLARITY bit.\r
-\r
- @param ParentHandle\r
- Handle of the parent firmware volume.\r
-\r
-**/\r
-struct _EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL {\r
- EFI_FVB_GET_ATTRIBUTES GetVolumeAttributes;\r
- EFI_FVB_SET_ATTRIBUTES SetVolumeAttributes;\r
- EFI_FVB_GET_PHYSICAL_ADDRESS GetPhysicalAddress;\r
- EFI_FVB_GET_BLOCK_SIZE GetBlockSize;\r
- EFI_FVB_READ Read;\r
- EFI_FVB_WRITE Write;\r
- EFI_FVB_ERASE_BLOCKS EraseBlocks;\r
- EFI_HANDLE ParentHandle;\r
-};\r
-\r
-extern EFI_GUID gEfiFirmwareVolumeBlockProtocolGuid;\r
-\r
-#endif\r