ImageOffset = <ImageOffset> # Fv offset of this SystemFirmware image (HEX)\r
FileGuid = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX # PcdEdkiiSystemFirmwareFileGuid\r
\r
- NOTE: The [Name?] entry may have differnt FileGuid.\r
+ NOTE: The [Name?] entry may have different FileGuid.\r
Only the one, whose FileGuid matches PcdEdkiiSystemFirmwareFileGuid, takes effect.\r
The other entry is ignored.\r
\r
ImageOffset = <ImageOffset> # Image offset of this SystemFirmware image (HEX)\r
FileGuid = XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX # PcdEdkiiSystemFirmwareFileGuid\r
\r
- NOTE: The [Name?] entry may have differnt FileGuid.\r
+ NOTE: The [Name?] entry may have different FileGuid.\r
Only the one, whose FileGuid matches PcdEdkiiSystemFirmwareFileGuid, takes effect.\r
The other entry is ignored.\r
\r
3.1) an ASCII String. The valid format is [A-Za-z0-9_]+\r
3.2) a GUID. The valid format is xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, where x is [A-Fa-f0-9]\r
3.3) a decimal value. The valid format is [0-9]+\r
- 3.4) a heximal value. The valid format is 0x[A-Fa-f0-9]+\r
+ 3.4) a hexadecimal value. The valid format is 0x[A-Fa-f0-9]+\r
4) '#' or ';' can be used as comment at anywhere.\r
5) TAB(0x20) or SPACE(0x9) can be used as separator.\r
6) LF(\n, 0xA) or CR(\r, 0xD) can be used as line break.\r
);\r
\r
/**\r
- Get section entry heximal UINTN value.\r
+ Get section entry hexadecimal UINTN value.\r
\r
@param[in] Context INI Config file context.\r
@param[in] SectionName Section name.\r
@param[in] EntryName Section entry name.\r
- @param[out] Data Point to the got heximal UINTN value.\r
+ @param[out] Data Point to the got hexadecimal UINTN value.\r
\r
- @retval EFI_SUCCESS Section entry heximal UINTN value is got.\r
+ @retval EFI_SUCCESS Section entry hexadecimal UINTN value is got.\r
@retval EFI_NOT_FOUND Section is not found.\r
**/\r
EFI_STATUS\r
);\r
\r
/**\r
- Get section entry heximal UINT64 value.\r
+ Get section entry hexadecimal UINT64 value.\r
\r
@param[in] Context INI Config file context.\r
@param[in] SectionName Section name.\r
@param[in] EntryName Section entry name.\r
- @param[out] Data Point to the got heximal UINT64 value.\r
+ @param[out] Data Point to the got hexadecimal UINT64 value.\r
\r
- @retval EFI_SUCCESS Section entry heximal UINT64 value is got.\r
+ @retval EFI_SUCCESS Section entry hexadecimal UINT64 value is got.\r
@retval EFI_NOT_FOUND Section is not found.\r
**/\r
EFI_STATUS\r
3.1) an ASCII String. The valid format is [A-Za-z0-9_]+\r
3.2) a GUID. The valid format is xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx, where x is [A-Fa-f0-9]\r
3.3) a decimal value. The valid format is [0-9]+\r
- 3.4) a heximal value. The valid format is 0x[A-Fa-f0-9]+\r
+ 3.4) a hexadecimal value. The valid format is 0x[A-Fa-f0-9]+\r
4) '#' or ';' can be used as comment at anywhere.\r
5) TAB(0x20) or SPACE(0x9) can be used as separator.\r
6) LF(\n, 0xA) or CR(\r, 0xD) can be used as line break.\r
}\r
\r
/**\r
- Return if the heximal string is valid.\r
+ Return if the hexadecimal string is valid.\r
\r
- @param[in] Hex The heximal string to be checked.\r
- @param[in] Length The length of heximal string in bytes.\r
+ @param[in] Hex The hexadecimal string to be checked.\r
+ @param[in] Length The length of hexadecimal string in bytes.\r
\r
- @retval TRUE The heximal string is valid.\r
- @retval FALSE The heximal string is invalid.\r
+ @retval TRUE The hexadecimal string is valid.\r
+ @retval FALSE The hexadecimal string is invalid.\r
**/\r
BOOLEAN\r
IsValidHexString (\r
/**\r
Trim Buffer by removing all CR, LF, TAB, and SPACE chars in its head and tail.\r
\r
- @param[in, out] Buffer On input, buffer data to be trimed.\r
+ @param[in, out] Buffer On input, buffer data to be trimmed.\r
On output, the trimmed buffer.\r
@param[in, out] BufferSize On input, size of original buffer data.\r
On output, size of the trimmed buffer.\r
}\r
\r
/**\r
- Get section entry heximal UINTN value.\r
+ Get section entry hexadecimal UINTN value.\r
\r
@param[in] Context INI Config file context.\r
@param[in] SectionName Section name.\r
@param[in] EntryName Section entry name.\r
- @param[out] Data Point to the got heximal UINTN value.\r
+ @param[out] Data Point to the got hexadecimal UINTN value.\r
\r
- @retval EFI_SUCCESS Section entry heximal UINTN value is got.\r
+ @retval EFI_SUCCESS Section entry hexadecimal UINTN value is got.\r
@retval EFI_NOT_FOUND Section is not found.\r
**/\r
EFI_STATUS\r
}\r
\r
/**\r
- Get section entry heximal UINT64 value.\r
+ Get section entry hexadecimal UINT64 value.\r
\r
@param[in] Context INI Config file context.\r
@param[in] SectionName Section name.\r
@param[in] EntryName Section entry name.\r
- @param[out] Data Point to the got heximal UINT64 value.\r
+ @param[out] Data Point to the got hexadecimal UINT64 value.\r
\r
- @retval EFI_SUCCESS Section entry heximal UINT64 value is got.\r
+ @retval EFI_SUCCESS Section entry hexadecimal UINT64 value is got.\r
@retval EFI_NOT_FOUND Section is not found.\r
**/\r
EFI_STATUS\r
[PcdsDynamicEx]\r
## This dynamic PCD holds the EDKII system firmware image descriptor.\r
# This information can be used for version check in EDKII system FMP capsule.\r
- # Only if the new EdkiiSystemFrimwareImageDescriptor.Version is not less than\r
+ # Only if the new EdkiiSystemFirmwareImageDescriptor.Version is not less than\r
# the current PcdEdkiiSystemFirmwareImageDescriptor.LowestSupportedVersion,\r
# the EDKII system FmpCapsule will be processed.\r
# The data structure of this PCD is EDKII_SYSTEM_FIRMWARE_IMAGE_DESCRIPTOR,\r
\r
## This dynamic PCD hold the GUID of a firmware FFS which includes EDKII\r
# system firmware image.\r
- # An EDKII system firmware udpate module need consume this PCD to extract\r
+ # An EDKII system firmware update module need consume this PCD to extract\r
# the EDKII system firmware from the capsule image.\r
# It must be in [PcdsDynamicEx], because the EDKII system firmware update module may\r
# consume the PCD produced in current system firmware image.\r