/**\r
Check parameters to a CPU I/O Protocol service request.\r
\r
- @param Width Signifies the width of the I/O or Memory operation.\r
- @param Address The base address of the I/O or Memory operation.\r
- @param Count The number of I/O or Memory operations to perform.\r
- The number of bytes moved is Width size * Count, starting at Address.\r
- @param Buffer For read operations, the destination buffer to store the results.\r
- For write operations, the source buffer from which to write data.\r
- @param MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.\r
-\r
- @retval EFI_SUCCESS The parameters for this request pass the checks.\r
- @retval EFI_INVALID_PARAMETER Buffer is NULL or Width is not valid.\r
- @retval EFI_UNSUPPORTED The address range specified by Address, Width, and Count exceeds Limit.\r
- The Buffer is not aligned for the given Width.\r
+ The I/O operations are carried out exactly as requested. The caller is responsible \r
+ for satisfying any alignment and I/O width restrictions that a PI System on a \r
+ platform might require. For example on some platforms, width requests of \r
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will \r
+ be handled by the driver.\r
+ \r
+ @param[in] MmioOperation TRUE for an MMIO operation, FALSE for I/O Port operation.\r
+ @param[in] Width Signifies the width of the I/O or Memory operation.\r
+ @param[in] Address The base address of the I/O operation. \r
+ @param[in] Count The number of I/O operations to perform. The number of \r
+ bytes moved is Width size * Count, starting at Address.\r
+ @param[in] Buffer For read operations, the destination buffer to store the results.\r
+ For write operations, the source buffer from which to write data.\r
+\r
+ @retval EFI_SUCCESS The parameters for this request pass the checks.\r
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.\r
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.\r
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width, \r
+ and Count is not valid for this PI system.\r
\r
**/\r
EFI_STATUS\r
{\r
UINT64 MaxCount;\r
UINT64 Limit;\r
- \r
+\r
//\r
// Check to see if Buffer is NULL\r
//\r
return EFI_INVALID_PARAMETER;\r
}\r
\r
+ //\r
+ // Check to see if Address is alligned\r
+ //\r
+ if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
//\r
// Check to see if any address associated with this transfer exceeds the maximum \r
// allowed address. The maximum address implied by the parameters passed in is\r
return EFI_UNSUPPORTED;\r
}\r
}\r
- \r
+\r
//\r
// Check to see if Buffer is alligned\r
//\r
/**\r
Reads memory-mapped registers.\r
\r
- @param This A pointer to the EFI_CPU_IO_PROTOCOL instance.\r
- @param Width Signifies the width of the I/O or Memory operation.\r
- @param Address The base address of the I/O or Memoryoperation.\r
- @param Count The number of I/O or Memory operations to perform.\r
- The number of bytes moved is Width size * Count, starting at Address.\r
- @param Buffer For read operations, the destination buffer to store the results.\r
- For write operations, the source buffer from which to write data.\r
-\r
- @retval EFI_SUCCESS The data was read from or written to the EFI system.\r
- @retval EFI_INVALID_PARAMETER Width is invalid for this EFI system.Or Buffer is NULL.\r
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
- Or,The address range specified by Address, Width, and Count is not valid for this EFI system.\r
+ The I/O operations are carried out exactly as requested. The caller is responsible \r
+ for satisfying any alignment and I/O width restrictions that a PI System on a \r
+ platform might require. For example on some platforms, width requests of \r
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will \r
+ be handled by the driver.\r
+ \r
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, \r
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for \r
+ each of the Count operations that is performed.\r
+ \r
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, \r
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is \r
+ incremented for each of the Count operations that is performed. The read or \r
+ write operation is performed Count times on the same Address.\r
+ \r
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, \r
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is \r
+ incremented for each of the Count operations that is performed. The read or \r
+ write operation is performed Count times from the first element of Buffer.\r
+ \r
+ @param[in] This A pointer to the EFI_CPU_IO_PROTOCOL instance.\r
+ @param[in] Width Signifies the width of the I/O or Memory operation.\r
+ @param[in] Address The base address of the I/O operation. \r
+ @param[in] Count The number of I/O operations to perform. The number of \r
+ bytes moved is Width size * Count, starting at Address.\r
+ @param[out] Buffer For read operations, the destination buffer to store the results.\r
+ For write operations, the source buffer from which to write data.\r
+\r
+ @retval EFI_SUCCESS The data was read from or written to the PI system.\r
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.\r
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.\r
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width, \r
+ and Count is not valid for this PI system.\r
\r
**/\r
EFI_STATUS\r
/**\r
Writes memory-mapped registers.\r
\r
- @param This A pointer to the EFI_CPU_IO_PROTOCOL instance.\r
- @param Width Signifies the width of the I/O or Memory operation.\r
- @param Address The base address of the I/O or Memoryoperation.\r
- @param Count The number of I/O or Memory operations to perform.\r
- The number of bytes moved is Width size * Count, starting at Address.\r
- @param Buffer For read operations, the destination buffer to store the results.\r
- For write operations, the source buffer from which to write data.\r
-\r
- @retval EFI_SUCCESS The data was read from or written to the EFI system.\r
- @retval EFI_INVALID_PARAMETER Width is invalid for this EFI system.Or Buffer is NULL.\r
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
- Or,The address range specified by Address, Width, and Count is not valid for this EFI system.\r
+ The I/O operations are carried out exactly as requested. The caller is responsible \r
+ for satisfying any alignment and I/O width restrictions that a PI System on a \r
+ platform might require. For example on some platforms, width requests of \r
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will \r
+ be handled by the driver.\r
+ \r
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, \r
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for \r
+ each of the Count operations that is performed.\r
+ \r
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, \r
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is \r
+ incremented for each of the Count operations that is performed. The read or \r
+ write operation is performed Count times on the same Address.\r
+ \r
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, \r
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is \r
+ incremented for each of the Count operations that is performed. The read or \r
+ write operation is performed Count times from the first element of Buffer.\r
+ \r
+ @param[in] This A pointer to the EFI_CPU_IO_PROTOCOL instance.\r
+ @param[in] Width Signifies the width of the I/O or Memory operation.\r
+ @param[in] Address The base address of the I/O operation. \r
+ @param[in] Count The number of I/O operations to perform. The number of \r
+ bytes moved is Width size * Count, starting at Address.\r
+ @param[in] Buffer For read operations, the destination buffer to store the results.\r
+ For write operations, the source buffer from which to write data.\r
+\r
+ @retval EFI_SUCCESS The data was read from or written to the PI system.\r
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.\r
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.\r
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width, \r
+ and Count is not valid for this PI system.\r
\r
**/\r
EFI_STATUS\r
/**\r
Reads I/O registers.\r
\r
- @param This A pointer to the EFI_CPU_IO_PROTOCOL instance.\r
- @param Width Signifies the width of the I/O or Memory operation.\r
- @param Address The base address of the I/O or Memoryoperation.\r
- @param Count The number of I/O or Memory operations to perform.\r
- The number of bytes moved is Width size * Count, starting at Address.\r
- @param Buffer For read operations, the destination buffer to store the results.\r
- For write operations, the source buffer from which to write data.\r
-\r
- @retval EFI_SUCCESS The data was read from or written to the EFI system.\r
- @retval EFI_INVALID_PARAMETER Width is invalid for this EFI system.Or Buffer is NULL.\r
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
- Or,The address range specified by Address, Width, and Count is not valid for this EFI system.\r
+ The I/O operations are carried out exactly as requested. The caller is responsible \r
+ for satisfying any alignment and I/O width restrictions that a PI System on a \r
+ platform might require. For example on some platforms, width requests of \r
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will \r
+ be handled by the driver.\r
+ \r
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, \r
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for \r
+ each of the Count operations that is performed.\r
+ \r
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, \r
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is \r
+ incremented for each of the Count operations that is performed. The read or \r
+ write operation is performed Count times on the same Address.\r
+ \r
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, \r
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is \r
+ incremented for each of the Count operations that is performed. The read or \r
+ write operation is performed Count times from the first element of Buffer.\r
+ \r
+ @param[in] This A pointer to the EFI_CPU_IO_PROTOCOL instance.\r
+ @param[in] Width Signifies the width of the I/O or Memory operation.\r
+ @param[in] Address The base address of the I/O operation. \r
+ @param[in] Count The number of I/O operations to perform. The number of \r
+ bytes moved is Width size * Count, starting at Address.\r
+ @param[out] Buffer For read operations, the destination buffer to store the results.\r
+ For write operations, the source buffer from which to write data.\r
+\r
+ @retval EFI_SUCCESS The data was read from or written to the PI system.\r
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.\r
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.\r
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width, \r
+ and Count is not valid for this PI system.\r
\r
**/\r
EFI_STATUS\r
/**\r
Write I/O registers.\r
\r
- @param This A pointer to the EFI_CPU_IO_PROTOCOL instance.\r
- @param Width Signifies the width of the I/O or Memory operation.\r
- @param Address The base address of the I/O or Memoryoperation.\r
- @param Count The number of I/O or Memory operations to perform.\r
- The number of bytes moved is Width size * Count, starting at Address.\r
- @param Buffer For read operations, the destination buffer to store the results.\r
- For write operations, the source buffer from which to write data.\r
-\r
- @retval EFI_SUCCESS The data was read from or written to the EFI system.\r
- @retval EFI_INVALID_PARAMETER Width is invalid for this EFI system.Or Buffer is NULL.\r
- @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
- Or,The address range specified by Address, Width, and Count is not valid for this EFI system.\r
-\r
+ The I/O operations are carried out exactly as requested. The caller is responsible \r
+ for satisfying any alignment and I/O width restrictions that a PI System on a \r
+ platform might require. For example on some platforms, width requests of \r
+ EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will \r
+ be handled by the driver.\r
+ \r
+ If Width is EfiCpuIoWidthUint8, EfiCpuIoWidthUint16, EfiCpuIoWidthUint32, \r
+ or EfiCpuIoWidthUint64, then both Address and Buffer are incremented for \r
+ each of the Count operations that is performed.\r
+ \r
+ If Width is EfiCpuIoWidthFifoUint8, EfiCpuIoWidthFifoUint16, \r
+ EfiCpuIoWidthFifoUint32, or EfiCpuIoWidthFifoUint64, then only Buffer is \r
+ incremented for each of the Count operations that is performed. The read or \r
+ write operation is performed Count times on the same Address.\r
+ \r
+ If Width is EfiCpuIoWidthFillUint8, EfiCpuIoWidthFillUint16, \r
+ EfiCpuIoWidthFillUint32, or EfiCpuIoWidthFillUint64, then only Address is \r
+ incremented for each of the Count operations that is performed. The read or \r
+ write operation is performed Count times from the first element of Buffer.\r
+ \r
+ @param[in] This A pointer to the EFI_CPU_IO_PROTOCOL instance.\r
+ @param[in] Width Signifies the width of the I/O or Memory operation.\r
+ @param[in] Address The base address of the I/O operation. \r
+ @param[in] Count The number of I/O operations to perform. The number of \r
+ bytes moved is Width size * Count, starting at Address.\r
+ @param[in] Buffer For read operations, the destination buffer to store the results.\r
+ For write operations, the source buffer from which to write data.\r
+\r
+ @retval EFI_SUCCESS The data was read from or written to the PI system.\r
+ @retval EFI_INVALID_PARAMETER Width is invalid for this PI system.\r
+ @retval EFI_INVALID_PARAMETER Buffer is NULL.\r
+ @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width.\r
+ @retval EFI_UNSUPPORTED The address range specified by Address, Width, \r
+ and Count is not valid for this PI system.\r
+ \r
**/\r
EFI_STATUS\r
EFIAPI\r