+++ /dev/null
-/** @file\r
- This file defines the Human Interface Infrastructure protocol which will\r
- be used by resources which want to publish IFR/Font/String data and have it\r
- collected by the Configuration engine.\r
-\r
- Copyright (c) 2007, Intel Corporation\r
- All rights reserved. This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
- Module Name: FrameworkHii.h\r
-\r
- @par Revision Reference:\r
- This protocol is defined in HII spec 0.92.\r
-\r
-**/\r
-\r
-#ifndef _FRAMEWORK_HII_H_\r
-#define _FRAMEWORK_HII_H_\r
-\r
-#include <PiDxe.h>\r
-\r
-//\r
-// To get EFI_GRAPHICS_OUTPUT_BLT_PIXEL,\r
-// is defined in MdePkg/Protocol/GraphicsOutput.h\r
-//\r
-#include <Protocol/GraphicsOutput.h>\r
-\r
-#define EFI_HII_PROTOCOL_GUID \\r
- { \\r
- 0xd7ad636e, 0xb997, 0x459b, {0xbf, 0x3f, 0x88, 0x46, 0x89, 0x79, 0x80, 0xe1} \\r
- }\r
-\r
-// BugBug:\r
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\r
-// If UGA goes away we need to put this some place. I'm not sure where?\r
-//\r
-//typedef struct {\r
-// UINT8 Blue;\r
-// UINT8 Green;\r
-// UINT8 Red;\r
-// UINT8 Reserved;\r
-//} EFI_UGA_PIXEL;\r
-\r
-//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\r
-//\r
-\r
-typedef struct _EFI_HII_PROTOCOL EFI_HII_PROTOCOL;\r
-\r
-//\r
-// Global definition\r
-//\r
-#define NARROW_CHAR 0xFFF0\r
-#define WIDE_CHAR 0xFFF1\r
-#define NON_BREAKING_CHAR 0xFFF2\r
-#define GLYPH_WIDTH 8\r
-#define GLYPH_HEIGHT 19\r
-\r
-#define EFI_HII_FONT 1\r
-#define EFI_HII_STRING 2\r
-#define EFI_HII_IFR 3\r
-#define EFI_HII_KEYBOARD 4\r
-#define EFI_HII_HANDLES 5\r
-#define EFI_HII_VARIABLE 6\r
-#define EFI_HII_DEVICE_PATH 7\r
-\r
-\r
-// References to string tokens must use this macro to enable scanning for\r
-// token usages.\r
-//\r
-#define STRING_TOKEN(t) t\r
-\r
-//\r
-// The following types are currently defined:\r
-//\r
-typedef UINT16 EFI_FORM_LABEL;\r
-\r
-#pragma pack(1)\r
-\r
-typedef struct {\r
- UINT32 Length;\r
- UINT16 Type;\r
-} EFI_HII_PACK_HEADER;\r
-\r
-//\r
-// A form list consists of a large variety of structure\r
-// possibilities so to represent the binary blob of data\r
-// associated with a package of forms, we will assume a\r
-// pointer to a self-describing data buffer.\r
-//\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
-} EFI_HII_IFR_PACK;\r
-\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header; // Must be filled in\r
- EFI_HANDLE ImageHandle; // Must be filled in\r
- EFI_HANDLE DeviceHandle; // Optional\r
- EFI_HANDLE ControllerHandle; // Optional\r
- EFI_HANDLE CallbackHandle; // Optional\r
- EFI_HANDLE COBExportHandle; // Optional\r
-} EFI_HII_HANDLE_PACK;\r
-\r
-//\r
-// ********************************************************\r
-// EFI_VARIABLE_CONTENTS\r
-// ********************************************************\r
-//\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
- EFI_GUID VariableGuid;\r
- UINT32 VariableNameLength;\r
- UINT16 VariableId;\r
- //\r
- // CHAR16 VariableName[]; //Null-terminated\r
- //\r
-} EFI_HII_VARIABLE_PACK;\r
-\r
-//\r
-// ********************************************************\r
-// EFI_DEVICE_PATH_PACK\r
-// ********************************************************\r
-//\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
- //\r
- // EFI_DEVICE_PATH DevicePath[];\r
- //\r
-} EFI_HII_DEVICE_PATH_PACK;\r
-\r
-//\r
-// ********************************************************\r
-// EFI_HII_DATA_TABLE\r
-// ********************************************************\r
-//\r
-typedef struct {\r
- EFI_HII_HANDLE HiiHandle;\r
- EFI_GUID PackageGuid;\r
- UINT32 DataTableSize;\r
- UINT32 IfrDataOffset;\r
- UINT32 StringDataOffset;\r
- UINT32 VariableDataOffset;\r
- UINT32 DevicePathOffset;\r
- UINT32 NumberOfVariableData;\r
- UINT32 NumberOfLanguages;\r
- //\r
- // EFI_HII_DEVICE_PATH_PACK DevicePath[];\r
- // EFI_HII_VARIABLE_PACK VariableData[];\r
- // EFI_HII_IFR_PACK IfrData;\r
- // EFI_HII_STRING_PACK StringData[];\r
- //\r
-} EFI_HII_DATA_TABLE;\r
-\r
-//\r
-// ********************************************************\r
-// EFI_HII_EXPORT_TABLE\r
-// ********************************************************\r
-//\r
-typedef struct {\r
- UINT32 NumberOfHiiDataTables;\r
- EFI_GUID Revision;\r
- //\r
- // EFI_HII_DATA_TABLE HiiDataTable[];\r
- //\r
-} EFI_HII_EXPORT_TABLE;\r
-\r
-typedef struct {\r
- BOOLEAN FormSetUpdate; // If TRUE, next variable is significant\r
- EFI_PHYSICAL_ADDRESS FormCallbackHandle; // If not 0, will update Formset with this info\r
- BOOLEAN FormUpdate; // If TRUE, next variable is significant\r
- UINT16 FormValue; // specify which form is to be updated if FormUpdate value is TRUE.\r
- STRING_REF FormTitle; // If not 0, will update Form with this info\r
- UINT16 DataCount; // The number of Data entries in this structure\r
- UINT8 *Data; // An array of 1+ op-codes, specified by DataCount\r
-} EFI_HII_UPDATE_DATA;\r
-\r
-//\r
-// String attributes\r
-//\r
-#define LANG_RIGHT_TO_LEFT 0x00000001\r
-\r
-//\r
-// A string package is used to localize strings to a particular\r
-// language. The package is associated with a particular driver\r
-// or set of drivers. Tools are used to associate tokens with\r
-// string references in forms and in programs. These tokens are\r
-// language agnostic. When paired with a language pack (directly\r
-// or indirectly), the string token resolves into an actual\r
-// UNICODE string. The NumStringPointers determines how many\r
-// StringPointers (offset values) there are as well as the total\r
-// number of Strings that are defined.\r
-//\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
- RELOFST LanguageNameString;\r
- RELOFST PrintableLanguageName;\r
- UINT32 NumStringPointers;\r
- UINT32 Attributes;\r
- //\r
- // RELOFST StringPointers[];\r
- // EFI_STRING Strings[];\r
- //\r
-} EFI_HII_STRING_PACK;\r
-\r
-//\r
-// Glyph Attributes\r
-//\r
-#define EFI_GLYPH_NON_SPACING 1\r
-#define EFI_GLYPH_WIDE 2\r
-\r
-typedef struct {\r
- CHAR16 UnicodeWeight;\r
- UINT8 Attributes;\r
- UINT8 GlyphCol1[GLYPH_HEIGHT];\r
-} EFI_NARROW_GLYPH;\r
-\r
-typedef struct {\r
- CHAR16 UnicodeWeight;\r
- UINT8 Attributes;\r
- UINT8 GlyphCol1[GLYPH_HEIGHT];\r
- UINT8 GlyphCol2[GLYPH_HEIGHT];\r
- UINT8 Pad[3];\r
-} EFI_WIDE_GLYPH;\r
-\r
-//\r
-// A font list consists of a font header followed by a series\r
-// of glyph structures. Note that fonts are not language specific.\r
-//\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
- UINT16 NumberOfNarrowGlyphs;\r
- UINT16 NumberOfWideGlyphs;\r
-} EFI_HII_FONT_PACK;\r
-\r
-//\r
-// The IfrData in the EFI_HII_IFR_PACK structure definition\r
-// is variable length, and not really part of the header. To\r
-// simplify from code the size of the header, define an\r
-// identical structure that does not include the IfrData field.\r
-// Then use sizeof() this new structure to determine the\r
-// actual size of the header.\r
-//\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
-} EFI_HII_IFR_PACK_HEADER;\r
-\r
-//\r
-// pedef EFI_HII_PACK_HEADER EFI_HII_IFR_PACK_HEADER;\r
-//\r
-typedef enum {\r
- EfiKeyLCtrl,\r
- EfiKeyA0,\r
- EfiKeyLAlt,\r
- EfiKeySpaceBar,\r
- EfiKeyA2,\r
- EfiKeyA3,\r
- EfiKeyA4,\r
- EfiKeyRCtrl,\r
- EfiKeyLeftArrow,\r
- EfiKeyDownArrow,\r
- EfiKeyRightArrow,\r
- EfiKeyZero,\r
- EfiKeyPeriod,\r
- EfiKeyEnter,\r
- EfiKeyLShift,\r
- EfiKeyB0,\r
- EfiKeyB1,\r
- EfiKeyB2,\r
- EfiKeyB3,\r
- EfiKeyB4,\r
- EfiKeyB5,\r
- EfiKeyB6,\r
- EfiKeyB7,\r
- EfiKeyB8,\r
- EfiKeyB9,\r
- EfiKeyB10,\r
- EfiKeyRshift,\r
- EfiKeyUpArrow,\r
- EfiKeyOne,\r
- EfiKeyTwo,\r
- EfiKeyThree,\r
- EfiKeyCapsLock,\r
- EfiKeyC1,\r
- EfiKeyC2,\r
- EfiKeyC3,\r
- EfiKeyC4,\r
- EfiKeyC5,\r
- EfiKeyC6,\r
- EfiKeyC7,\r
- EfiKeyC8,\r
- EfiKeyC9,\r
- EfiKeyC10,\r
- EfiKeyC11,\r
- EfiKeyC12,\r
- EfiKeyFour,\r
- EfiKeyFive,\r
- EfiKeySix,\r
- EfiKeyPlus,\r
- EfiKeyTab,\r
- EfiKeyD1,\r
- EfiKeyD2,\r
- EfiKeyD3,\r
- EfiKeyD4,\r
- EfiKeyD5,\r
- EfiKeyD6,\r
- EfiKeyD7,\r
- EfiKeyD8,\r
- EfiKeyD9,\r
- EfiKeyD10,\r
- EfiKeyD11,\r
- EfiKeyD12,\r
- EfiKeyD13,\r
- EfiKeyDel,\r
- EfiKeyEnd,\r
- EfiKeyPgDn,\r
- EfiKeySeven,\r
- EfiKeyEight,\r
- EfiKeyNine,\r
- EfiKeyE0,\r
- EfiKeyE1,\r
- EfiKeyE2,\r
- EfiKeyE3,\r
- EfiKeyE4,\r
- EfiKeyE5,\r
- EfiKeyE6,\r
- EfiKeyE7,\r
- EfiKeyE8,\r
- EfiKeyE9,\r
- EfiKeyE10,\r
- EfiKeyE11,\r
- EfiKeyE12,\r
- EfiKeyBackSpace,\r
- EfiKeyIns,\r
- EfiKeyHome,\r
- EfiKeyPgUp,\r
- EfiKeyNLck,\r
- EfiKeySlash,\r
- EfiKeyAsterisk,\r
- EfiKeyMinus,\r
- EfiKeyEsc,\r
- EfiKeyF1,\r
- EfiKeyF2,\r
- EfiKeyF3,\r
- EfiKeyF4,\r
- EfiKeyF5,\r
- EfiKeyF6,\r
- EfiKeyF7,\r
- EfiKeyF8,\r
- EfiKeyF9,\r
- EfiKeyF10,\r
- EfiKeyF11,\r
- EfiKeyF12,\r
- EfiKeyPrint,\r
- EfiKeySLck,\r
- EfiKeyPause\r
-} EFI_KEY;\r
-\r
-typedef struct {\r
- EFI_KEY Key;\r
- CHAR16 Unicode;\r
- CHAR16 ShiftedUnicode;\r
- CHAR16 AltGrUnicode;\r
- CHAR16 ShiftedAltGrUnicode;\r
- UINT16 Modifier;\r
-} EFI_KEY_DESCRIPTOR;\r
-\r
-//\r
-// This structure allows a sparse set of keys to be redefined\r
-// or a complete redefinition of the keyboard layout. Most\r
-// keyboards have a lot of commonality in their layouts, therefore\r
-// only defining those keys that need to change from the default\r
-// minimizes the passed in information.\r
-//\r
-// Additionally, when an update occurs, the active keyboard layout\r
-// will be switched to the newly updated keyboard layout. This\r
-// allows for situations that when a keyboard layout driver is\r
-// loaded as part of system initialization, the system will default\r
-// the keyboard behavior to the new layout.\r
-//\r
-// Each call to update the keyboard mapping should contain the\r
-// complete set of key descriptors to be updated, since every\r
-// call to the HII which contains an EFI_HII_KEYBOARD_PACK will\r
-// wipe the previous set of overrides. A call to\r
-//\r
-typedef struct {\r
- EFI_HII_PACK_HEADER Header;\r
- EFI_KEY_DESCRIPTOR *Descriptor;\r
- UINT8 DescriptorCount;\r
-} EFI_HII_KEYBOARD_PACK;\r
-\r
-//\r
-// The EFI_HII_PACKAGES can contain different types of packages just\r
-// after the structure as inline data.\r
-//\r
-typedef struct {\r
- UINTN NumberOfPackages;\r
- EFI_GUID *GuidId;\r
- //\r
- // EFI_HII_HANDLE_PACK *HandlePack; // Only one pack.\r
- // EFI_HII_IFR_PACK *IfrPack; // Only one pack.\r
- // EFI_HII_FONT_PACK *FontPack[]; // Multiple packs ok\r
- // EFI_HII_STRING_PACK *StringPack[]; // Multiple packs ok\r
- // EFI_HII_KEYBOARD_PACK *KeyboardPack[]; // Multiple packs ok\r
- //\r
-} EFI_HII_PACKAGES;\r
-\r
-typedef struct _EFI_HII_VARIABLE_PACK_LIST {\r
- struct _EFI_HII_VARIABLE_PACK_LIST *NextVariablePack;\r
- EFI_HII_VARIABLE_PACK *VariablePack;\r
-} EFI_HII_VARIABLE_PACK_LIST;\r
-\r
-#pragma pack()\r
-\r
-/**\r
- Registers the various packs that are passed in via the Packages parameter.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Packages A pointer to an EFI_HII_PACKAGES package instance.\r
- @param Handle A pointer to the EFI_HII_HANDLE instance.\r
-\r
- @retval EFI_SUCCESS Data was extracted from Packages, the database\r
- was updated with the data, and Handle returned successfully.\r
- @retval EFI_INVALID_PARAMETER The content of Packages was invalid.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_NEW_PACK) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_PACKAGES *Packages,\r
- OUT EFI_HII_HANDLE *Handle\r
- );\r
-\r
-/**\r
- Removes a package from the HII database.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle The handle that was registered to the data that is requested\r
- for removal.\r
-\r
- @retval EFI_SUCCESS The data associated with the Handle was removed\r
- from the HII database.\r
- @retval EFI_INVALID_PARAMETER The Handle was not valid.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_REMOVE_PACK) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle\r
- );\r
-\r
-/**\r
- Determines the handles that are currently active in the database.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param HandleBufferLength On input, a pointer to the length of the handle\r
- buffer. On output, the length of the handle buffer that is required\r
- for the handles found.\r
- @param Handle An array of EFI_HII_HANDLE instances returned.\r
-\r
- @retval EFI_SUCCESS Handle was updated successfully.\r
- @retval EFI_BUFFER_TOO_SMALL The HandleBufferLength parameter indicates\r
- that Handle is too small to support the number of handles.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_FIND_HANDLES) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN OUT UINT16 *HandleBufferLength,\r
- OUT EFI_HII_HANDLE *Handle\r
- );\r
-\r
-/**\r
- Exports the contents of the database into a buffer.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle An EFI_HII_HANDLE that corresponds to the desired\r
- handle to export. If the value is 0, the entire database will be exported.\r
- In either case, the data will be exported in a format described by the\r
- structure definition of EFI_HII_EXPORT_TABLE.\r
- @param BufferSize\r
- On input, a pointer to the length of the buffer. On output, the length\r
- of the buffer that is required for the export data.\r
- @param Buffer A pointer to a buffer that will contain the results of the export function.\r
-\r
- @retval EFI_SUCCESS The buffer was successfully filled with BufferSize amount of data.\r
- @retval EFI_BUFFER_TOO_SMALL The value in BufferSize was too small to contain the export data.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_EXPORT) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle,\r
- IN OUT UINTN *BufferSize,\r
- OUT VOID *Buffer\r
- );\r
-\r
-/**\r
- Remove any new strings that were added after the initial string export\r
- for this handle.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle The handle on which the string resides.\r
-\r
- @retval EFI_SUCCESS Remove strings from the handle successfully.\r
- @retval EFI_INVALID_PARAMETER The Handle was unknown.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_RESET_STRINGS) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle\r
- );\r
-\r
-/**\r
- Tests if all of the characters in a string have corresponding font characters.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param StringToTest A pointer to a Unicode string.\r
- @param FirstMissing A pointer to an index into the string. On input,\r
- the index of the first character in the StringToTest to examine. On exit,\r
- the index of the first character encountered for which a glyph is unavailable.\r
- If all glyphs in the string are available, the index is the index of the\r
- terminator of the string.\r
- @param GlyphBufferSize A pointer to a value. On output, if the function\r
- returns EFI_SUCCESS, it contains the amount of memory that is required to\r
- store the string's glyph equivalent.\r
-\r
- @retval EFI_SUCCESS All glyphs are available. Note that an empty string\r
- always returns this value.\r
- @retval EFI_NOT_FOUND A glyph was not found for a character.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_TEST_STRING) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN CHAR16 *StringToTest,\r
- IN OUT UINT32 *FirstMissing,\r
- OUT UINT32 *GlyphBufferSize\r
- );\r
-\r
-/**\r
- Translates a Unicode character into the corresponding font glyph.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Source A pointer to a Unicode string.\r
- @param Index On input, the offset into the string from which to fetch\r
- the character.On successful completion, the index is updated to the first\r
- character past the character(s) making up the just extracted glyph.\r
- @param GlyphBuffer Pointer to an array where the glyphs corresponding\r
- to the characters in the source may be stored. GlyphBuffer is assumed\r
- to be wide enough to accept a wide glyph character.\r
- @param BitWidth If EFI_SUCCESS was returned, the UINT16 pointed to by\r
- this value is filled with the length of the glyph in pixels. It is unchanged\r
- if the call was unsuccessful.\r
- @param InternalStatus The cell pointed to by this parameter must be\r
- initialized to zero prior to invoking the call the first time for any string.\r
-\r
- @retval EFI_SUCCESS It worked.\r
- @retval EFI_NOT_FOUND A glyph for a character was not found.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_GLYPH) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN CHAR16 *Source,\r
- IN OUT UINT16 *Index,\r
- OUT UINT8 **GlyphBuffer,\r
- OUT UINT16 *BitWidth,\r
- IN OUT UINT32 *InternalStatus\r
- );\r
-\r
-/**\r
- Translates a glyph into the format required for input to the Universal\r
- Graphics Adapter (UGA) Block Transfer (BLT) routines.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param GlyphBuffer A pointer to the buffer that contains glyph data.\r
- @param Foreground The foreground setting requested to be used for the\r
- generated BltBuffer data.\r
- @param Background The background setting requested to be used for the\r
- generated BltBuffer data.\r
- @param Count The entry in the BltBuffer upon which to act.\r
- @param Width The width in bits of the glyph being converted.\r
- @param Height The height in bits of the glyph being converted\r
- @param BltBuffer A pointer to the buffer that contains the data that is\r
- ready to be used by the UGA BLT routines.\r
-\r
- @retval EFI_SUCCESS It worked.\r
- @retval EFI_NOT_FOUND A glyph for a character was not found.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GLYPH_TO_BLT) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN UINT8 *GlyphBuffer,\r
- IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground,\r
- IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Background,\r
- IN UINTN Count,\r
- IN UINTN Width,\r
- IN UINTN Height,\r
- IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer\r
- );\r
-\r
-/**\r
- Allows a new string to be added to an already existing string package.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Pointer to a NULL-terminated string containing a single ISO 639-2\r
- language identifier, indicating the language in which the string is translated.\r
- @param Handle The handle of the language pack to which the string is to be added.\r
- @param Reference The identifier of the string to be added. If the reference\r
- value is zero, then the string will be assigned a new identifier on that\r
- handle for the language specified. Otherwise, the string will be updated\r
- with the NewString Value.\r
- @param NewString The string to be added.\r
-\r
- @retval EFI_SUCCESS The string was effectively registered.\r
- @retval EFI_INVALID_PARAMETER The Handle was unknown.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_NEW_STRING) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN CHAR16 *Language,\r
- IN EFI_HII_HANDLE Handle,\r
- IN OUT STRING_REF *Reference,\r
- IN CHAR16 *NewString\r
- );\r
-\r
-/**\r
- Allows a program to determine the primary languages that are supported\r
- on a given handle.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle The handle on which the strings reside.\r
- @param LanguageString A string allocated by GetPrimaryLanguages() that\r
- contains a list of all primary languages registered on the handle.\r
-\r
- @retval EFI_SUCCESS LanguageString was correctly returned.\r
- @retval EFI_INVALID_PARAMETER The Handle was unknown.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_PRI_LANGUAGES) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle,\r
- OUT EFI_STRING *LanguageString\r
- );\r
-\r
-/**\r
- Allows a program to determine which secondary languages are supported\r
- on a given handle for a given primary language.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle The handle on which the strings reside.\r
- @param PrimaryLanguage Pointer to a NULL-terminated string containing a single\r
- ISO 639-2 language identifier, indicating the primary language.\r
- @param LanguageString A string allocated by GetSecondaryLanguages()\r
- containing a list of all secondary languages registered on the handle.\r
-\r
- @retval EFI_SUCCESS LanguageString was correctly returned.\r
- @retval EFI_INVALID_PARAMETER The Handle was unknown.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_SEC_LANGUAGES) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle,\r
- IN CHAR16 *PrimaryLanguage,\r
- OUT EFI_STRING *LanguageString\r
- );\r
-\r
-/**\r
- Extracts a string from a package already registered with the EFI HII database.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle The handle on which the string resides.\r
- @param Token The string token assigned to the string.\r
- @param Raw If TRUE, the string is returned unedited in the internal\r
- storage format described above. If false, the string returned is edited\r
- by replacing <cr> with <space> and by removing special characters such\r
- as the <wide> prefix.\r
- @param LanguageString Pointer to a NULL-terminated string containing a\r
- single ISO 639-2 language identifier, indicating the language to print.\r
- If the LanguageString is empty (starts with a NULL), the default system\r
- language will be used to determine the language.\r
- @param BufferLength Length of the StringBuffer.\r
- @param StringBuffer The buffer designed to receive the characters in the string.\r
-\r
- @retval EFI_SUCCESS StringBuffer is filled with a NULL-terminated string.\r
- @retval EFI_INVALID_PARAMETER The handle or string token is unknown.\r
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough to\r
- allow the entire string to be stored.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_STRING) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle,\r
- IN STRING_REF Token,\r
- IN BOOLEAN Raw,\r
- IN CHAR16 *LanguageString,\r
- IN OUT UINTN *BufferLength,\r
- OUT EFI_STRING StringBuffer\r
- );\r
-\r
-/**\r
- Allows a program to extract a part of a string of not more than a given width.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle The handle on which the string resides.\r
- @param Token The string token assigned to the string.\r
- @param Index On input, the offset into the string where the line is to start.\r
- On output, the index is updated to point to beyond the last character returned\r
- in the call.\r
- @param LineWidth The maximum width of the line in units of narrow glyphs.\r
- @param LanguageString Pointer to a NULL-terminated string containing a\r
- single ISO 639-2 language identifier, indicating the language to print.\r
- @param BufferLength Pointer to the length of the StringBuffer.\r
- @param StringBuffer The buffer designed to receive the characters in the string.\r
-\r
- @retval EFI_SUCCESS StringBuffer filled with characters that will fit on the line.\r
- @retval EFI_NOT_FOUND The font glyph for at least one of the characters in\r
- the string is not in the font database.\r
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough\r
- to allow the entire string to be stored.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_LINE) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle,\r
- IN STRING_REF Token,\r
- IN OUT UINT16 *Index,\r
- IN UINT16 LineWidth,\r
- IN CHAR16 *LanguageString,\r
- IN OUT UINT16 *BufferLength,\r
- OUT EFI_STRING StringBuffer\r
- );\r
-\r
-/**\r
- Allows a program to extract a form or form package that has previously\r
- been registered with the HII database.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle Handle on which the form resides.\r
- @param FormId The ID of the form to return. If the ID is zero,\r
- the entire form package is returned.\r
- @param BufferLength On input, the length of the Buffer. On output,\r
- the length of the returned buffer,\r
- @param Buffer The buffer designed to receive the form(s).\r
-\r
- @retval EFI_SUCCESS Buffer filled with the requested forms. BufferLength\r
- was updated.\r
- @retval EFI_INVALID_PARAMETER The handle is unknown.\r
- @retval EFI_NOT_FOUND A form on the requested handle cannot be found with\r
- the requested FormId.\r
- @retval EFI_BUFFER_TOO_SMALL The buffer provided was not large enough\r
- to allow the form to be stored.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_FORMS) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle,\r
- IN EFI_FORM_ID FormId,\r
- IN OUT UINTN *BufferLength,\r
- OUT UINT8 *Buffer\r
- );\r
-\r
-/**\r
- Extracts the defaults that are associated with a given handle in the HII database.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle The HII handle from which will have default data retrieved.\r
- @param DefaultMask The mask used to specify some type of default override when extracting\r
- the default image data.\r
- @param VariablePackList A indirect pointer to the first entry of a link list with\r
- type EFI_HII_VARIABLE_PACK_LIST.\r
-\r
- @retval EFI_SUCCESS The VariablePackList was populated with the appropriate\r
- default setting data.\r
- @retval EFI_NOT_FOUND The IFR does not have any explicit or default map(s).\r
- @retval EFI_INVALID_PARAMETER The HII database entry associated with Handle\r
- contain invalid data.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_DEFAULT_IMAGE) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle,\r
- IN UINTN DefaultMask,\r
- OUT EFI_HII_VARIABLE_PACK_LIST **VariablePackList\r
- );\r
-\r
-/**\r
- Allows the caller to update a form or form package that has previously been\r
- registered with the EFI HII database.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param Handle Handle of the package where the form to be updated resides.\r
- @param Label The label inside the form package where the update is to take place.\r
- @param AddData If TRUE, adding data at a given Label; otherwise,\r
- if FALSE, removing data at a given Label.\r
- @param Data The buffer containing the new tags to insert after the Label\r
-\r
- @retval EFI_SUCCESS The form was updated with the new tags.\r
- @retval EFI_INVALID_PARAMETER The buffer for the buffer length does not\r
- contain an integral number of tags.\r
- @retval EFI_NOT_FOUND The Handle, Label, or FormId was not found.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_UPDATE_FORM) (\r
- IN EFI_HII_PROTOCOL *This,\r
- IN EFI_HII_HANDLE Handle,\r
- IN EFI_FORM_LABEL Label,\r
- IN BOOLEAN AddData,\r
- IN EFI_HII_UPDATE_DATA *Data\r
- );\r
-\r
-/**\r
- Retrieves the current keyboard layout.\r
-\r
- @param This A pointer to the EFI_HII_PROTOCOL instance.\r
- @param DescriptorCount A pointer to the number of Descriptor entries being\r
- described in the keyboard layout being retrieved.\r
- @param Descriptor A pointer to a buffer containing an array of EFI_KEY_DESCRIPTOR\r
- entries. Each entry will reflect the definition of a specific physical key.\r
-\r
- @retval EFI_SUCCESS The keyboard layout was retrieved successfully.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_HII_GET_KEYBOARD_LAYOUT) (\r
- IN EFI_HII_PROTOCOL *This,\r
- OUT UINT16 *DescriptorCount,\r
- OUT EFI_KEY_DESCRIPTOR *Descriptor\r
- );\r
-\r
-/**\r
- @par Protocol Description:\r
- The HII Protocol manages the HII database, which is a repository for data\r
- having to do with fonts, strings, forms, keyboards, and other future human\r
- interface items.\r
-\r
- @param NewPack\r
- Extracts the various packs from a package list.\r
-\r
- @param RemovePack\r
- Removes a package from the HII database.\r
-\r
- @param FindHandles\r
- Determines the handles that are currently active in the database.\r
-\r
- @param ExportDatabase\r
- Export the entire contents of the database to a buffer.\r
-\r
- @param TestString\r
- Tests if all of the characters in a string have corresponding font characters.\r
-\r
- @param GetGlyph\r
- Translates a Unicode character into the corresponding font glyph.\r
-\r
- @param GlyphToBlt\r
- Converts a glyph value into a format that is ready for a UGA BLT command.\r
-\r
- @param NewString\r
- Allows a new string to be added to an already existing string package.\r
-\r
- @param GetPrimaryLanguages\r
- Allows a program to determine the primary languages that are supported\r
- on a given handle.\r
-\r
- @param GetSecondaryLanguages\r
- Allows a program to determine which secondary languages are supported\r
- on a given handle for a given primary language.\r
-\r
- @param GetString\r
- Extracts a string from a package that is already registered with the\r
- EFI HII database.\r
-\r
- @param ResetString\r
- Remove any new strings that were added after the initial string export\r
- for this handle.\r
-\r
- @param GetLine\r
- Allows a program to extract a part of a string of not more than a given width.\r
-\r
- @param GetForms\r
- Allows a program to extract a form or form package that has been previously registered.\r
-\r
- @param GetDefaultImage\r
- Allows a program to extract the nonvolatile image that represents the default storage image.\r
-\r
- @param UpdateForm\r
- Allows a program to update a previously registered form.\r
-\r
- @param GetKeyboardLayout\r
- Allows a program to extract the current keyboard layout.\r
-\r
-**/\r
-struct _EFI_HII_PROTOCOL {\r
- EFI_HII_NEW_PACK NewPack;\r
- EFI_HII_REMOVE_PACK RemovePack;\r
- EFI_HII_FIND_HANDLES FindHandles;\r
- EFI_HII_EXPORT ExportDatabase;\r
-\r
- EFI_HII_TEST_STRING TestString;\r
- EFI_HII_GET_GLYPH GetGlyph;\r
- EFI_HII_GLYPH_TO_BLT GlyphToBlt;\r
-\r
- EFI_HII_NEW_STRING NewString;\r
- EFI_HII_GET_PRI_LANGUAGES GetPrimaryLanguages;\r
- EFI_HII_GET_SEC_LANGUAGES GetSecondaryLanguages;\r
- EFI_HII_GET_STRING GetString;\r
- EFI_HII_RESET_STRINGS ResetStrings;\r
- EFI_HII_GET_LINE GetLine;\r
- EFI_HII_GET_FORMS GetForms;\r
- EFI_HII_GET_DEFAULT_IMAGE GetDefaultImage;\r
- EFI_HII_UPDATE_FORM UpdateForm;\r
-\r
- EFI_HII_GET_KEYBOARD_LAYOUT GetKeyboardLayout;\r
-};\r
-\r
-extern EFI_GUID gEfiHiiProtocolGuid;\r
-\r
-#endif\r