-/** @file\r
- Implementation of Multiple Processor PPI services.\r
-\r
- Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>\r
- This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
-**/\r
-\r
-#include "PeiMpServices.h"\r
-\r
-//\r
-// CPU MP PPI to be installed\r
-//\r
-EFI_PEI_MP_SERVICES_PPI mMpServicesPpi = {\r
- PeiGetNumberOfProcessors,\r
- PeiGetProcessorInfo,\r
- PeiStartupAllAPs,\r
- PeiStartupThisAP,\r
- PeiSwitchBSP,\r
- PeiEnableDisableAP,\r
- PeiWhoAmI,\r
-};\r
-\r
-EFI_PEI_PPI_DESCRIPTOR mPeiCpuMpPpiDesc = {\r
- (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r
- &gEfiPeiMpServicesPpiGuid,\r
- &mMpServicesPpi\r
-};\r
-\r
-\r
-/**\r
- This service retrieves the number of logical processor in the platform\r
- and the number of those logical processors that are enabled on this boot.\r
- This service may only be called from the BSP.\r
-\r
- This function is used to retrieve the following information:\r
- - The number of logical processors that are present in the system.\r
- - The number of enabled logical processors in the system at the instant\r
- this call is made.\r
-\r
- Because MP Service Ppi provides services to enable and disable processors\r
- dynamically, the number of enabled logical processors may vary during the\r
- course of a boot session.\r
-\r
- If this service is called from an AP, then EFI_DEVICE_ERROR is returned.\r
- If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then\r
- EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors\r
- is returned in NumberOfProcessors, the number of currently enabled processor\r
- is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.\r
-\r
- @param[in] PeiServices An indirect pointer to the PEI Services Table\r
- published by the PEI Foundation.\r
- @param[in] This Pointer to this instance of the PPI.\r
- @param[out] NumberOfProcessors Pointer to the total number of logical processors in\r
- the system, including the BSP and disabled APs.\r
- @param[out] NumberOfEnabledProcessors\r
- Number of processors in the system that are enabled.\r
-\r
- @retval EFI_SUCCESS The number of logical processors and enabled\r
- logical processors was retrieved.\r
- @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
- @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.\r
- NumberOfEnabledProcessors is NULL.\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-PeiGetNumberOfProcessors (\r
- IN CONST EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_MP_SERVICES_PPI *This,\r
- OUT UINTN *NumberOfProcessors,\r
- OUT UINTN *NumberOfEnabledProcessors\r
- )\r
-{\r
- if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- return MpInitLibGetNumberOfProcessors (\r
- NumberOfProcessors,\r
- NumberOfEnabledProcessors\r
- );\r
-}\r
-\r
-/**\r
- Gets detailed MP-related information on the requested processor at the\r
- instant this call is made. This service may only be called from the BSP.\r
-\r
- This service retrieves detailed MP-related information about any processor\r
- on the platform. Note the following:\r
- - The processor information may change during the course of a boot session.\r
- - The information presented here is entirely MP related.\r
-\r
- Information regarding the number of caches and their sizes, frequency of operation,\r
- slot numbers is all considered platform-related information and is not provided\r
- by this service.\r
-\r
- @param[in] PeiServices An indirect pointer to the PEI Services Table\r
- published by the PEI Foundation.\r
- @param[in] This Pointer to this instance of the PPI.\r
- @param[in] ProcessorNumber Pointer to the total number of logical processors in\r
- the system, including the BSP and disabled APs.\r
- @param[out] ProcessorInfoBuffer Number of processors in the system that are enabled.\r
-\r
- @retval EFI_SUCCESS Processor information was returned.\r
- @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
- @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.\r
- @retval EFI_NOT_FOUND The processor with the handle specified by\r
- ProcessorNumber does not exist in the platform.\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-PeiGetProcessorInfo (\r
- IN CONST EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_MP_SERVICES_PPI *This,\r
- IN UINTN ProcessorNumber,\r
- OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer\r
- )\r
-{\r
- return MpInitLibGetProcessorInfo (ProcessorNumber, ProcessorInfoBuffer, NULL);\r
-}\r
-\r
-/**\r
- This service executes a caller provided function on all enabled APs. APs can\r
- run either simultaneously or one at a time in sequence. This service supports\r
- both blocking requests only. This service may only\r
- be called from the BSP.\r
-\r
- This function is used to dispatch all the enabled APs to the function specified\r
- by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned\r
- immediately and Procedure is not started on any AP.\r
-\r
- If SingleThread is TRUE, all the enabled APs execute the function specified by\r
- Procedure one by one, in ascending order of processor handle number. Otherwise,\r
- all the enabled APs execute the function specified by Procedure simultaneously.\r
-\r
- If the timeout specified by TimeoutInMicroSeconds expires before all APs return\r
- from Procedure, then Procedure on the failed APs is terminated. All enabled APs\r
- are always available for further calls to EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()\r
- and EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If FailedCpuList is not NULL, its\r
- content points to the list of processor handle numbers in which Procedure was\r
- terminated.\r
-\r
- Note: It is the responsibility of the consumer of the EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()\r
- to make sure that the nature of the code that is executed on the BSP and the\r
- dispatched APs is well controlled. The MP Services Ppi does not guarantee\r
- that the Procedure function is MP-safe. Hence, the tasks that can be run in\r
- parallel are limited to certain independent tasks and well-controlled exclusive\r
- code. PEI services and Ppis may not be called by APs unless otherwise\r
- specified.\r
-\r
- In blocking execution mode, BSP waits until all APs finish or\r
- TimeoutInMicroSeconds expires.\r
-\r
- @param[in] PeiServices An indirect pointer to the PEI Services Table\r
- published by the PEI Foundation.\r
- @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
- @param[in] Procedure A pointer to the function to be run on enabled APs of\r
- the system.\r
- @param[in] SingleThread If TRUE, then all the enabled APs execute the function\r
- specified by Procedure one by one, in ascending order\r
- of processor handle number. If FALSE, then all the\r
- enabled APs execute the function specified by Procedure\r
- simultaneously.\r
- @param[in] TimeoutInMicroSeconds\r
- Indicates the time limit in microseconds for APs to\r
- return from Procedure, for blocking mode only. Zero\r
- means infinity. If the timeout expires before all APs\r
- return from Procedure, then Procedure on the failed APs\r
- is terminated. All enabled APs are available for next\r
- function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()\r
- or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the\r
- timeout expires in blocking mode, BSP returns\r
- EFI_TIMEOUT.\r
- @param[in] ProcedureArgument The parameter passed into Procedure for all APs.\r
-\r
- @retval EFI_SUCCESS In blocking mode, all APs have finished before the\r
- timeout expired.\r
- @retval EFI_DEVICE_ERROR Caller processor is AP.\r
- @retval EFI_NOT_STARTED No enabled APs exist in the system.\r
- @retval EFI_NOT_READY Any enabled APs are busy.\r
- @retval EFI_TIMEOUT In blocking mode, the timeout expired before all\r
- enabled APs have finished.\r
- @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-PeiStartupAllAPs (\r
- IN CONST EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_MP_SERVICES_PPI *This,\r
- IN EFI_AP_PROCEDURE Procedure,\r
- IN BOOLEAN SingleThread,\r
- IN UINTN TimeoutInMicroSeconds,\r
- IN VOID *ProcedureArgument OPTIONAL\r
- )\r
-{\r
- return MpInitLibStartupAllAPs (\r
- Procedure,\r
- SingleThread,\r
- NULL,\r
- TimeoutInMicroSeconds,\r
- ProcedureArgument,\r
- NULL\r
- );\r
-}\r
-\r
-/**\r
- This service lets the caller get one enabled AP to execute a caller-provided\r
- function. The caller can request the BSP to wait for the completion\r
- of the AP. This service may only be called from the BSP.\r
-\r
- This function is used to dispatch one enabled AP to the function specified by\r
- Procedure passing in the argument specified by ProcedureArgument.\r
- The execution is in blocking mode. The BSP waits until the AP finishes or\r
- TimeoutInMicroSecondss expires.\r
-\r
- If the timeout specified by TimeoutInMicroseconds expires before the AP returns\r
- from Procedure, then execution of Procedure by the AP is terminated. The AP is\r
- available for subsequent calls to EFI_PEI_MP_SERVICES_PPI.StartupAllAPs() and\r
- EFI_PEI_MP_SERVICES_PPI.StartupThisAP().\r
-\r
- @param[in] PeiServices An indirect pointer to the PEI Services Table\r
- published by the PEI Foundation.\r
- @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
- @param[in] Procedure A pointer to the function to be run on enabled APs of\r
- the system.\r
- @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
- total number of logical processors minus 1. The total\r
- number of logical processors can be retrieved by\r
- EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().\r
- @param[in] TimeoutInMicroseconds\r
- Indicates the time limit in microseconds for APs to\r
- return from Procedure, for blocking mode only. Zero\r
- means infinity. If the timeout expires before all APs\r
- return from Procedure, then Procedure on the failed APs\r
- is terminated. All enabled APs are available for next\r
- function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()\r
- or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the\r
- timeout expires in blocking mode, BSP returns\r
- EFI_TIMEOUT.\r
- @param[in] ProcedureArgument The parameter passed into Procedure for all APs.\r
-\r
- @retval EFI_SUCCESS In blocking mode, specified AP finished before the\r
- timeout expires.\r
- @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
- @retval EFI_TIMEOUT In blocking mode, the timeout expired before the\r
- specified AP has finished.\r
- @retval EFI_NOT_FOUND The processor with the handle specified by\r
- ProcessorNumber does not exist.\r
- @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.\r
- @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-PeiStartupThisAP (\r
- IN CONST EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_MP_SERVICES_PPI *This,\r
- IN EFI_AP_PROCEDURE Procedure,\r
- IN UINTN ProcessorNumber,\r
- IN UINTN TimeoutInMicroseconds,\r
- IN VOID *ProcedureArgument OPTIONAL\r
- )\r
-{\r
- return MpInitLibStartupThisAP (\r
- Procedure,\r
- ProcessorNumber,\r
- NULL,\r
- TimeoutInMicroseconds,\r
- ProcedureArgument,\r
- NULL\r
- );\r
-}\r
-\r
-/**\r
- This service switches the requested AP to be the BSP from that point onward.\r
- This service changes the BSP for all purposes. This call can only be performed\r
- by the current BSP.\r
-\r
- This service switches the requested AP to be the BSP from that point onward.\r
- This service changes the BSP for all purposes. The new BSP can take over the\r
- execution of the old BSP and continue seamlessly from where the old one left\r
- off.\r
-\r
- If the BSP cannot be switched prior to the return from this service, then\r
- EFI_UNSUPPORTED must be returned.\r
-\r
- @param[in] PeiServices An indirect pointer to the PEI Services Table\r
- published by the PEI Foundation.\r
- @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
- @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
- total number of logical processors minus 1. The total\r
- number of logical processors can be retrieved by\r
- EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().\r
- @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an enabled\r
- AP. Otherwise, it will be disabled.\r
-\r
- @retval EFI_SUCCESS BSP successfully switched.\r
- @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to this\r
- service returning.\r
- @retval EFI_UNSUPPORTED Switching the BSP is not supported.\r
- @retval EFI_SUCCESS The calling processor is an AP.\r
- @retval EFI_NOT_FOUND The processor with the handle specified by\r
- ProcessorNumber does not exist.\r
- @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or a disabled\r
- AP.\r
- @retval EFI_NOT_READY The specified AP is busy.\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-PeiSwitchBSP (\r
- IN CONST EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_MP_SERVICES_PPI *This,\r
- IN UINTN ProcessorNumber,\r
- IN BOOLEAN EnableOldBSP\r
- )\r
-{\r
- return MpInitLibSwitchBSP (ProcessorNumber, EnableOldBSP);\r
-}\r
-\r
-/**\r
- This service lets the caller enable or disable an AP from this point onward.\r
- This service may only be called from the BSP.\r
-\r
- This service allows the caller enable or disable an AP from this point onward.\r
- The caller can optionally specify the health status of the AP by Health. If\r
- an AP is being disabled, then the state of the disabled AP is implementation\r
- dependent. If an AP is enabled, then the implementation must guarantee that a\r
- complete initialization sequence is performed on the AP, so the AP is in a state\r
- that is compatible with an MP operating system.\r
-\r
- If the enable or disable AP operation cannot be completed prior to the return\r
- from this service, then EFI_UNSUPPORTED must be returned.\r
-\r
- @param[in] PeiServices An indirect pointer to the PEI Services Table\r
- published by the PEI Foundation.\r
- @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
- @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
- total number of logical processors minus 1. The total\r
- number of logical processors can be retrieved by\r
- EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().\r
- @param[in] EnableAP Specifies the new state for the processor for enabled,\r
- FALSE for disabled.\r
- @param[in] HealthFlag If not NULL, a pointer to a value that specifies the\r
- new health status of the AP. This flag corresponds to\r
- StatusFlag defined in EFI_PEI_MP_SERVICES_PPI.GetProcessorInfo().\r
- Only the PROCESSOR_HEALTH_STATUS_BIT is used. All other\r
- bits are ignored. If it is NULL, this parameter is\r
- ignored.\r
-\r
- @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.\r
- @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed prior\r
- to this service returning.\r
- @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.\r
- @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
- @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber\r
- does not exist.\r
- @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-PeiEnableDisableAP (\r
- IN CONST EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_MP_SERVICES_PPI *This,\r
- IN UINTN ProcessorNumber,\r
- IN BOOLEAN EnableAP,\r
- IN UINT32 *HealthFlag OPTIONAL\r
- )\r
-{\r
- return MpInitLibEnableDisableAP (ProcessorNumber, EnableAP, HealthFlag);\r
-}\r
-\r
-/**\r
- This return the handle number for the calling processor. This service may be\r
- called from the BSP and APs.\r
-\r
- This service returns the processor handle number for the calling processor.\r
- The returned value is in the range from 0 to the total number of logical\r
- processors minus 1. The total number of logical processors can be retrieved\r
- with EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors(). This service may be\r
- called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER\r
- is returned. Otherwise, the current processors handle number is returned in\r
- ProcessorNumber, and EFI_SUCCESS is returned.\r
-\r
- @param[in] PeiServices An indirect pointer to the PEI Services Table\r
- published by the PEI Foundation.\r
- @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
- @param[out] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
- total number of logical processors minus 1. The total\r
- number of logical processors can be retrieved by\r
- EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().\r
-\r
- @retval EFI_SUCCESS The current processor handle number was returned in\r
- ProcessorNumber.\r
- @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.\r
-**/\r
-EFI_STATUS\r
-EFIAPI\r
-PeiWhoAmI (\r
- IN CONST EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_MP_SERVICES_PPI *This,\r
- OUT UINTN *ProcessorNumber\r
- )\r
-{\r
- return MpInitLibWhoAmI (ProcessorNumber);\r
-}\r