-/** @file\r
- Base SMBUS library implementation built upon I/O library.\r
-\r
- Copyright (c) 2006, Intel Corporation<BR>\r
- All rights reserved. This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
- Module Name: SmbusLib.c\r
-\r
-**/\r
-\r
-#include "SmbusLibRegisters.h"\r
-\r
-#define SMBUS_LIB_SLAVE_ADDRESS(SmBusAddress) (((SmBusAddress) >> 1) & 0x7f)\r
-#define SMBUS_LIB_COMMAND(SmBusAddress) (((SmBusAddress) >> 8) & 0xff)\r
-#define SMBUS_LIB_LENGTH(SmBusAddress) (((SmBusAddress) >> 16) & 0x3f)\r
-#define SMBUS_LIB_PEC(SmBusAddress) ((BOOLEAN) (((SmBusAddress) & SMBUS_LIB_PEC_BIT) != 0))\r
-#define SMBUS_LIB_RESEARVED(SmBusAddress) ((SmBusAddress) & ~(((1 << 22) - 2) | SMBUS_LIB_PEC_BIT))\r
-\r
-//\r
-// Replaced by PCD\r
-//\r
-#define ICH_SMBUS_IO_BASE_ADDRESS 0xEFA0\r
-\r
-/**\r
- Reads an 8-bit register on ICH SMBUS controller.\r
-\r
- This internal function reads an SMBUS register specified by Offset.\r
-\r
- @param Offset The offset of SMBUS register.\r
-\r
- @return The value read.\r
-\r
-**/\r
-UINT8\r
-InternalSmBusIoRead8 (\r
- IN UINTN Offset\r
- )\r
-{\r
- return IoRead8 (ICH_SMBUS_IO_BASE_ADDRESS + Offset);\r
-}\r
-\r
-/**\r
- Writes an 8-bit register on ICH SMBUS controller.\r
-\r
- This internal function writes an SMBUS register specified by Offset.\r
-\r
- @param Offset The offset of SMBUS register.\r
- @param Value The value to write to SMBUS register.\r
-\r
- @return The value written the SMBUS register.\r
-\r
-**/\r
-UINT8\r
-InternalSmBusIoWrite8 (\r
- IN UINTN Offset,\r
- IN UINT8 Value\r
- )\r
-{\r
- return IoWrite8 (ICH_SMBUS_IO_BASE_ADDRESS + Offset, Value);\r
-}\r
-\r
-/**\r
- Acquires the ownership of SMBUS.\r
-\r
- This internal function reads the host state register.\r
- If the SMBUS is not available, RETURN_TIMEOUT is returned;\r
- Otherwise, it performs some basic initializations and returns\r
- RETURN_SUCCESS. \r
-\r
- @retval RETURN_SUCCESS The SMBUS command was executed successfully.\r
- @retval RETURN_TIMEOUT A timeout occurred while executing the SMBUS command.\r
-\r
-**/\r
-RETURN_STATUS\r
-InternalSmBusAcquire (\r
- VOID \r
- )\r
-{\r
- UINT8 HostStatus;\r
-\r
- HostStatus = InternalSmBusIoRead8 (SMBUS_R_HST_STS);\r
- if ((HostStatus & SMBUS_B_INUSE_STS) != 0) {\r
- return RETURN_TIMEOUT;\r
- } else if ((HostStatus & SMBUS_B_HOST_BUSY) != 0) {\r
- //\r
- // Clear host status register and exit.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_STS, SMBUS_B_HSTS_ALL);\r
- return RETURN_TIMEOUT;\r
- }\r
- //\r
- // Clear out any odd status information (Will Not Clear In Use).\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_STS, HostStatus);\r
- \r
- return RETURN_SUCCESS;\r
-}\r
-\r
-/**\r
- Starts the SMBUS transaction and waits until the end.\r
-\r
- This internal function start the SMBUS transaction and waits until the transaction\r
- of SMBUS is over by polling the INTR bit of Host status register.\r
- If the SMBUS is not available, RETURN_TIMEOUT is returned;\r
- Otherwise, it performs some basic initializations and returns\r
- RETURN_SUCCESS.\r
- \r
- @param HostControl The Host control command to start SMBUS transaction.\r
-\r
- @retval RETURN_SUCCESS The SMBUS command was executed successfully.\r
- @retval RETURN_CRC_ERROR The checksum is not correct (PEC is incorrect).\r
- @retval RETURN_DEVICE_ERROR The request was not completed because a failure reflected\r
- in the Host Status Register bit. Device errors are\r
- a result of a transaction collision, illegal command field,\r
- unclaimed cycle (host initiated), or bus errors (collisions).\r
-\r
-**/\r
-RETURN_STATUS\r
-InternalSmBusStart (\r
- IN UINT8 HostControl\r
- )\r
-{\r
- UINT8 HostStatus;\r
- UINT8 AuxiliaryStatus;\r
-\r
- //\r
- // Set Host Control Register (Initiate Operation, Interrupt disabled).\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_CTL, HostControl + SMBUS_B_START);\r
-\r
- do {\r
- //\r
- // Poll INTR bit of Host Status Register.\r
- //\r
- HostStatus = InternalSmBusIoRead8 (SMBUS_R_HST_STS);\r
- } while ((HostStatus & (SMBUS_B_INTR | SMBUS_B_ERROR | SMBUS_B_BYTE_DONE_STS)) == 0);\r
- \r
- if ((HostStatus & SMBUS_B_ERROR) == 0) {\r
- return RETURN_SUCCESS;\r
- }\r
- //\r
- // Clear error bits of Host Status Register.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_STS, SMBUS_B_ERROR);\r
- //\r
- // Read Auxiliary Status Register to judge CRC error.\r
- //\r
- AuxiliaryStatus = InternalSmBusIoRead8 (SMBUS_R_AUX_STS);\r
- if ((AuxiliaryStatus & SMBUS_B_CRCE) != 0) {\r
- return RETURN_CRC_ERROR;\r
- }\r
-\r
- return RETURN_DEVICE_ERROR;\r
-}\r
-\r
-/**\r
- Executes an SMBUS quick, byte or word command.\r
-\r
- This internal function executes an SMBUS quick, byte or word commond.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
-\r
- @param HostControl The value of Host Control Register to set. \r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The byte/word write to the SMBUS.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The byte/word read from the SMBUS.\r
-\r
-**/\r
-UINT16\r
-InternalSmBusNonBlock (\r
- IN UINT8 HostControl,\r
- IN UINTN SmBusAddress,\r
- IN UINT16 Value,\r
- OUT RETURN_STATUS *Status\r
- )\r
-{\r
- RETURN_STATUS ReturnStatus;\r
- UINT8 AuxiliaryControl;\r
-\r
- //\r
- // Try to acquire the ownership of ICH SMBUS.\r
- //\r
- ReturnStatus = InternalSmBusAcquire ();\r
- if (RETURN_ERROR (ReturnStatus)) {\r
- goto Done;\r
- }\r
- //\r
- // Set the appropriate Host Control Register and auxiliary Control Register.\r
- //\r
- AuxiliaryControl = 0;\r
- if (SMBUS_LIB_PEC (SmBusAddress)) {\r
- AuxiliaryControl |= SMBUS_B_AAC;\r
- HostControl |= SMBUS_B_PEC_EN;\r
- }\r
- //\r
- // Set Host Commond Register.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_CMD, (UINT8) SMBUS_LIB_COMMAND (SmBusAddress));\r
- //\r
- // Write value to Host Data 0 and Host Data 1 Registers.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_D0, (UINT8) Value);\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_D1, (UINT8) (Value >> 8));\r
- //\r
- // Set Auxiliary Control Regiester.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_AUX_CTL, AuxiliaryControl);\r
- //\r
- // Set SMBUS slave address for the device to send/receive from.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_XMIT_SLVA, (UINT8) SmBusAddress);\r
- //\r
- // Start the SMBUS transaction and wait for the end.\r
- //\r
- ReturnStatus = InternalSmBusStart (HostControl);\r
- //\r
- // Read value from Host Data 0 and Host Data 1 Registers.\r
- //\r
- Value = InternalSmBusIoRead8 (SMBUS_R_HST_D1) << 8;\r
- Value |= InternalSmBusIoRead8 (SMBUS_R_HST_D0);\r
- //\r
- // Clear Host Status Register and Auxiliary Status Register.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_STS, SMBUS_B_HSTS_ALL);\r
- InternalSmBusIoWrite8 (SMBUS_R_AUX_STS, SMBUS_B_CRCE);\r
-\r
-Done:\r
- if (Status != NULL) {\r
- *Status = ReturnStatus;\r
- }\r
-\r
- return Value;\r
-}\r
-\r
-/**\r
- Executes an SMBUS quick read command.\r
-\r
- Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress.\r
- Only the SMBUS slave address field of SmBusAddress is required.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If PEC is set in SmBusAddress, then ASSERT().\r
- If Command in SmBusAddress is not zero, then ASSERT().\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
-**/\r
-VOID\r
-EFIAPI\r
-SmBusQuickRead (\r
- IN UINTN SmBusAddress,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (!SMBUS_LIB_PEC (SmBusAddress));\r
- ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_QUICK,\r
- SmBusAddress | SMBUS_B_READ,\r
- 0,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS quick write command.\r
-\r
- Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress.\r
- Only the SMBUS slave address field of SmBusAddress is required.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If PEC is set in SmBusAddress, then ASSERT().\r
- If Command in SmBusAddress is not zero, then ASSERT().\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
-**/\r
-VOID\r
-EFIAPI\r
-SmBusQuickWrite (\r
- IN UINTN SmBusAddress,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (!SMBUS_LIB_PEC (SmBusAddress));\r
- ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_QUICK,\r
- SmBusAddress | SMBUS_B_WRITE,\r
- 0,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS receive byte command.\r
-\r
- Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress.\r
- Only the SMBUS slave address field of SmBusAddress is required.\r
- The byte received from the SMBUS is returned.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If Command in SmBusAddress is not zero, then ASSERT().\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The byte received from the SMBUS.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-SmBusReceiveByte (\r
- IN UINTN SmBusAddress,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return (UINT8) InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_BYTE,\r
- SmBusAddress | SMBUS_B_READ,\r
- 0,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS send byte command.\r
-\r
- Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress.\r
- The byte specified by Value is sent.\r
- Only the SMBUS slave address field of SmBusAddress is required. Value is returned.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If Command in SmBusAddress is not zero, then ASSERT().\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The 8-bit value to send.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The parameter of Value.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-SmBusSendByte (\r
- IN UINTN SmBusAddress,\r
- IN UINT8 Value,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return (UINT8) InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_BYTE,\r
- SmBusAddress | SMBUS_B_WRITE,\r
- Value,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS read data byte command.\r
-\r
- Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress.\r
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
- The 8-bit value read from the SMBUS is returned.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The byte read from the SMBUS.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-SmBusReadDataByte (\r
- IN UINTN SmBusAddress,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return (UINT8) InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_BYTE_DATA,\r
- SmBusAddress | SMBUS_B_READ,\r
- 0,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS write data byte command.\r
-\r
- Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress.\r
- The 8-bit value specified by Value is written.\r
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
- Value is returned.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The 8-bit value to write.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The parameter of Value.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-SmBusWriteDataByte (\r
- IN UINTN SmBusAddress,\r
- IN UINT8 Value,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return (UINT8) InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_BYTE_DATA,\r
- SmBusAddress | SMBUS_B_WRITE,\r
- Value,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS read data word command.\r
-\r
- Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress.\r
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
- The 16-bit value read from the SMBUS is returned.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
- \r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The byte read from the SMBUS.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-SmBusReadDataWord (\r
- IN UINTN SmBusAddress,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_WORD_DATA,\r
- SmBusAddress | SMBUS_B_READ,\r
- 0,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS write data word command.\r
-\r
- Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress.\r
- The 16-bit value specified by Value is written.\r
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
- Value is returned.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The 16-bit value to write.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The parameter of Value.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-SmBusWriteDataWord (\r
- IN UINTN SmBusAddress,\r
- IN UINT16 Value,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_WORD_DATA,\r
- SmBusAddress | SMBUS_B_WRITE,\r
- Value,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS process call command.\r
-\r
- Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress.\r
- The 16-bit value specified by Value is written.\r
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
- The 16-bit value returned by the process call command is returned.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Value The 16-bit value to write.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The 16-bit value returned by the process call command.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-SmBusProcessCall (\r
- IN UINTN SmBusAddress,\r
- IN UINT16 Value,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return InternalSmBusNonBlock (\r
- SMBUS_V_SMB_CMD_PROCESS_CALL,\r
- SmBusAddress | SMBUS_B_WRITE,\r
- Value,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS block command.\r
-\r
- Executes an SMBUS block read, block write and block write-block read command\r
- on the SMBUS device specified by SmBusAddress.\r
- Bytes are read from the SMBUS and stored in Buffer.\r
- The number of bytes read is returned, and will never return a value larger than 32-bytes.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.\r
- SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.\r
-\r
- @param HostControl The value of Host Control Register to set. \r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS.\r
- @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The number of bytes read from the SMBUS.\r
-\r
-**/\r
-UINTN\r
-InternalSmBusBlock (\r
- IN UINT8 HostControl,\r
- IN UINTN SmBusAddress,\r
- IN UINT8 *WriteBuffer,\r
- OUT UINT8 *ReadBuffer,\r
- OUT RETURN_STATUS *Status\r
- )\r
-{\r
- RETURN_STATUS ReturnStatus;\r
- UINTN Index;\r
- UINTN BytesCount;\r
- UINT8 AuxiliaryControl;\r
- \r
- BytesCount = SMBUS_LIB_LENGTH (SmBusAddress);\r
- //\r
- // Try to acquire the ownership of ICH SMBUS.\r
- //\r
- ReturnStatus = InternalSmBusAcquire ();\r
- if (RETURN_ERROR (ReturnStatus)) {\r
- goto Done;\r
- }\r
- //\r
- // Set the appropriate Host Control Register and auxiliary Control Register.\r
- //\r
- AuxiliaryControl = SMBUS_B_E32B;\r
- if (SMBUS_LIB_PEC (SmBusAddress)) {\r
- AuxiliaryControl |= SMBUS_B_AAC;\r
- HostControl |= SMBUS_B_PEC_EN;\r
- }\r
- //\r
- // Set Host Command Register.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_CMD, (UINT8) SMBUS_LIB_COMMAND (SmBusAddress));\r
- //\r
- // Set Auxiliary Control Regiester.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_AUX_CTL, AuxiliaryControl);\r
- //\r
- // Clear byte pointer of 32-byte buffer.\r
- //\r
- InternalSmBusIoRead8 (SMBUS_R_HST_CTL);\r
-\r
- if (WriteBuffer != NULL) {\r
- //\r
- // Write the number of block to Host Block Data Byte Register.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_D0, (UINT8) BytesCount);\r
- //\r
- // Write data block to Host Block Data Register.\r
- //\r
- for (Index = 0; Index < BytesCount; Index++) {\r
- InternalSmBusIoWrite8 (SMBUS_R_HOST_BLOCK_DB, WriteBuffer[Index]);\r
- }\r
- }\r
- //\r
- // Set SMBUS slave address for the device to send/receive from.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_XMIT_SLVA, (UINT8) SmBusAddress);\r
- //\r
- // Start the SMBUS transaction and wait for the end.\r
- //\r
- ReturnStatus = InternalSmBusStart (HostControl);\r
- if (RETURN_ERROR (ReturnStatus)) {\r
- goto Done;\r
- }\r
-\r
- if (ReadBuffer != NULL) {\r
- //\r
- // Read the number of block from host block data byte register.\r
- //\r
- BytesCount = InternalSmBusIoRead8 (SMBUS_R_HST_D0);\r
- //\r
- // Write data block from Host Block Data Register.\r
- //\r
- for (Index = 0; Index < BytesCount; Index++) {\r
- ReadBuffer[Index] = InternalSmBusIoRead8 (SMBUS_R_HOST_BLOCK_DB);\r
- }\r
- }\r
- //\r
- // Clear Host Status Register and Auxiliary Status Register.\r
- //\r
- InternalSmBusIoWrite8 (SMBUS_R_HST_STS, SMBUS_B_HSTS_ALL);\r
- InternalSmBusIoWrite8 (SMBUS_R_AUX_STS, SMBUS_B_CRCE);\r
-\r
-Done:\r
- if (Status != NULL) {\r
- *Status = ReturnStatus;\r
- }\r
-\r
- return BytesCount;\r
-}\r
-\r
-/**\r
- Executes an SMBUS read block command.\r
-\r
- Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress.\r
- Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.\r
- Bytes are read from the SMBUS and stored in Buffer.\r
- The number of bytes read is returned, and will never return a value larger than 32-bytes.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.\r
- SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.\r
- If Length in SmBusAddress is not zero, then ASSERT().\r
- If Buffer is NULL, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The number of bytes read.\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-SmBusReadBlock (\r
- IN UINTN SmBusAddress,\r
- OUT VOID *Buffer,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (Buffer != NULL);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return InternalSmBusBlock (\r
- SMBUS_V_SMB_CMD_BLOCK,\r
- SmBusAddress | SMBUS_B_READ,\r
- NULL,\r
- Buffer,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS write block command.\r
-\r
- Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress.\r
- The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required.\r
- Bytes are written to the SMBUS from Buffer.\r
- The number of bytes written is returned, and will never return a value larger than 32-bytes.\r
- If Status is not NULL, then the status of the executed command is returned in Status. \r
- If Length in SmBusAddress is zero or greater than 32, then ASSERT().\r
- If Buffer is NULL, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param Buffer Pointer to the buffer to store the bytes read from the SMBUS.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The number of bytes written.\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-SmBusWriteBlock (\r
- IN UINTN SmBusAddress,\r
- OUT VOID *Buffer,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (Buffer != NULL);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return InternalSmBusBlock (\r
- SMBUS_V_SMB_CMD_BLOCK,\r
- SmBusAddress | SMBUS_B_WRITE,\r
- Buffer,\r
- NULL,\r
- Status\r
- );\r
-}\r
-\r
-/**\r
- Executes an SMBUS block process call command.\r
-\r
- Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress.\r
- The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required.\r
- Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer.\r
- If Status is not NULL, then the status of the executed command is returned in Status.\r
- It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read.\r
- SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.\r
- If Length in SmBusAddress is zero or greater than 32, then ASSERT().\r
- If WriteBuffer is NULL, then ASSERT().\r
- If ReadBuffer is NULL, then ASSERT().\r
- If any reserved bits of SmBusAddress are set, then ASSERT().\r
-\r
- @param SmBusAddress Address that encodes the SMBUS Slave Address,\r
- SMBUS Command, SMBUS Data Length, and PEC.\r
- @param WriteBuffer Pointer to the buffer of bytes to write to the SMBUS.\r
- @param ReadBuffer Pointer to the buffer of bytes to read from the SMBUS.\r
- @param Status Return status for the executed command.\r
- This is an optional parameter and may be NULL.\r
-\r
- @return The number of bytes written.\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-SmBusBlockProcessCall (\r
- IN UINTN SmBusAddress,\r
- IN VOID *WriteBuffer,\r
- OUT VOID *ReadBuffer,\r
- OUT RETURN_STATUS *Status OPTIONAL\r
- )\r
-{\r
- ASSERT (WriteBuffer != NULL);\r
- ASSERT (ReadBuffer != NULL);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1);\r
- ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32);\r
- ASSERT (SMBUS_LIB_RESEARVED (SmBusAddress) == 0);\r
-\r
- return InternalSmBusBlock (\r
- SMBUS_V_SMB_CMD_BLOCK_PROCESS,\r
- SmBusAddress | SMBUS_B_WRITE,\r
- WriteBuffer,\r
- ReadBuffer,\r
- Status\r
- );\r
-}\r