--- /dev/null
+/** @file\r
+ EDKII_PEI_MP_SERVICES2_PPI Implementation code.\r
+\r
+ Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>\r
+ SPDX-License-Identifier: BSD-2-Clause-Patent\r
+\r
+**/\r
+\r
+#include "CpuMpPei.h"\r
+\r
+/**\r
+ This service retrieves the number of logical processor in the platform\r
+ and the number of those logical processors that are enabled on this boot.\r
+ This service may only be called from the BSP.\r
+\r
+ This function is used to retrieve the following information:\r
+ - The number of logical processors that are present in the system.\r
+ - The number of enabled logical processors in the system at the instant\r
+ this call is made.\r
+\r
+ Because MP Service Ppi provides services to enable and disable processors\r
+ dynamically, the number of enabled logical processors may vary during the\r
+ course of a boot session.\r
+\r
+ If this service is called from an AP, then EFI_DEVICE_ERROR is returned.\r
+ If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then\r
+ EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors\r
+ is returned in NumberOfProcessors, the number of currently enabled processor\r
+ is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.\r
+\r
+ @param[in] This Pointer to this instance of the PPI.\r
+ @param[out] NumberOfProcessors Pointer to the total number of logical processors in\r
+ the system, including the BSP and disabled APs.\r
+ @param[out] NumberOfEnabledProcessors\r
+ Number of processors in the system that are enabled.\r
+\r
+ @retval EFI_SUCCESS The number of logical processors and enabled\r
+ logical processors was retrieved.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.\r
+ NumberOfEnabledProcessors is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EdkiiPeiGetNumberOfProcessors (\r
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,\r
+ OUT UINTN *NumberOfProcessors,\r
+ OUT UINTN *NumberOfEnabledProcessors\r
+ )\r
+{\r
+ if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ return MpInitLibGetNumberOfProcessors (\r
+ NumberOfProcessors,\r
+ NumberOfEnabledProcessors\r
+ );\r
+}\r
+\r
+/**\r
+ Gets detailed MP-related information on the requested processor at the\r
+ instant this call is made. This service may only be called from the BSP.\r
+\r
+ This service retrieves detailed MP-related information about any processor\r
+ on the platform. Note the following:\r
+ - The processor information may change during the course of a boot session.\r
+ - The information presented here is entirely MP related.\r
+\r
+ Information regarding the number of caches and their sizes, frequency of operation,\r
+ slot numbers is all considered platform-related information and is not provided\r
+ by this service.\r
+\r
+ @param[in] This Pointer to this instance of the PPI.\r
+ @param[in] ProcessorNumber Pointer to the total number of logical processors in\r
+ the system, including the BSP and disabled APs.\r
+ @param[out] ProcessorInfoBuffer Number of processors in the system that are enabled.\r
+\r
+ @retval EFI_SUCCESS Processor information was returned.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist in the platform.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EdkiiPeiGetProcessorInfo (\r
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,\r
+ IN UINTN ProcessorNumber,\r
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer\r
+ )\r
+{\r
+ return MpInitLibGetProcessorInfo (ProcessorNumber, ProcessorInfoBuffer, NULL);\r
+}\r
+\r
+/**\r
+ This service executes a caller provided function on all enabled APs. APs can\r
+ run either simultaneously or one at a time in sequence. This service supports\r
+ both blocking requests only. This service may only\r
+ be called from the BSP.\r
+\r
+ This function is used to dispatch all the enabled APs to the function specified\r
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned\r
+ immediately and Procedure is not started on any AP.\r
+\r
+ If SingleThread is TRUE, all the enabled APs execute the function specified by\r
+ Procedure one by one, in ascending order of processor handle number. Otherwise,\r
+ all the enabled APs execute the function specified by Procedure simultaneously.\r
+\r
+ If the timeout specified by TimeoutInMicroSeconds expires before all APs return\r
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs\r
+ are always available for further calls to EDKII_PEI_MP_SERVICES2_PPI.StartupAllAPs()\r
+ and EDKII_PEI_MP_SERVICES2_PPI.StartupThisAP(). If FailedCpuList is not NULL, its\r
+ content points to the list of processor handle numbers in which Procedure was\r
+ terminated.\r
+\r
+ Note: It is the responsibility of the consumer of the EDKII_PEI_MP_SERVICES2_PPI.StartupAllAPs()\r
+ to make sure that the nature of the code that is executed on the BSP and the\r
+ dispatched APs is well controlled. The MP Services Ppi does not guarantee\r
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in\r
+ parallel are limited to certain independent tasks and well-controlled exclusive\r
+ code. PEI services and Ppis may not be called by APs unless otherwise\r
+ specified.\r
+\r
+ In blocking execution mode, BSP waits until all APs finish or\r
+ TimeoutInMicroSeconds expires.\r
+\r
+ @param[in] This A pointer to the EDKII_PEI_MP_SERVICES2_PPI instance.\r
+ @param[in] Procedure A pointer to the function to be run on enabled APs of\r
+ the system.\r
+ @param[in] SingleThread If TRUE, then all the enabled APs execute the function\r
+ specified by Procedure one by one, in ascending order\r
+ of processor handle number. If FALSE, then all the\r
+ enabled APs execute the function specified by Procedure\r
+ simultaneously.\r
+ @param[in] TimeoutInMicroSeconds\r
+ Indicates the time limit in microseconds for APs to\r
+ return from Procedure, for blocking mode only. Zero\r
+ means infinity. If the timeout expires before all APs\r
+ return from Procedure, then Procedure on the failed APs\r
+ is terminated. All enabled APs are available for next\r
+ function assigned by EDKII_PEI_MP_SERVICES2_PPI.StartupAllAPs()\r
+ or EDKII_PEI_MP_SERVICES2_PPI.StartupThisAP(). If the\r
+ timeout expires in blocking mode, BSP returns\r
+ EFI_TIMEOUT.\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for all APs.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before the\r
+ timeout expired.\r
+ @retval EFI_DEVICE_ERROR Caller processor is AP.\r
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.\r
+ @retval EFI_NOT_READY Any enabled APs are busy.\r
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before all\r
+ enabled APs have finished.\r
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EdkiiPeiStartupAllAPs (\r
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN BOOLEAN SingleThread,\r
+ IN UINTN TimeoutInMicroSeconds,\r
+ IN VOID *ProcedureArgument OPTIONAL\r
+ )\r
+{\r
+ return MpInitLibStartupAllAPs (\r
+ Procedure,\r
+ SingleThread,\r
+ NULL,\r
+ TimeoutInMicroSeconds,\r
+ ProcedureArgument,\r
+ NULL\r
+ );\r
+}\r
+\r
+/**\r
+ This service lets the caller get one enabled AP to execute a caller-provided\r
+ function. The caller can request the BSP to wait for the completion\r
+ of the AP. This service may only be called from the BSP.\r
+\r
+ This function is used to dispatch one enabled AP to the function specified by\r
+ Procedure passing in the argument specified by ProcedureArgument.\r
+ The execution is in blocking mode. The BSP waits until the AP finishes or\r
+ TimeoutInMicroSecondss expires.\r
+\r
+ If the timeout specified by TimeoutInMicroseconds expires before the AP returns\r
+ from Procedure, then execution of Procedure by the AP is terminated. The AP is\r
+ available for subsequent calls to EDKII_PEI_MP_SERVICES2_PPI.StartupAllAPs() and\r
+ EDKII_PEI_MP_SERVICES2_PPI.StartupThisAP().\r
+\r
+ @param[in] This A pointer to the EDKII_PEI_MP_SERVICES2_PPI instance.\r
+ @param[in] Procedure A pointer to the function to be run on enabled APs of\r
+ the system.\r
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
+ total number of logical processors minus 1. The total\r
+ number of logical processors can be retrieved by\r
+ EDKII_PEI_MP_SERVICES2_PPI.GetNumberOfProcessors().\r
+ @param[in] TimeoutInMicroseconds\r
+ Indicates the time limit in microseconds for APs to\r
+ return from Procedure, for blocking mode only. Zero\r
+ means infinity. If the timeout expires before all APs\r
+ return from Procedure, then Procedure on the failed APs\r
+ is terminated. All enabled APs are available for next\r
+ function assigned by EDKII_PEI_MP_SERVICES2_PPI.StartupAllAPs()\r
+ or EDKII_PEI_MP_SERVICES2_PPI.StartupThisAP(). If the\r
+ timeout expires in blocking mode, BSP returns\r
+ EFI_TIMEOUT.\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for all APs.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before the\r
+ timeout expires.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before the\r
+ specified AP has finished.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.\r
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EdkiiPeiStartupThisAP (\r
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN UINTN ProcessorNumber,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL\r
+ )\r
+{\r
+ return MpInitLibStartupThisAP (\r
+ Procedure,\r
+ ProcessorNumber,\r
+ NULL,\r
+ TimeoutInMicroseconds,\r
+ ProcedureArgument,\r
+ NULL\r
+ );\r
+}\r
+\r
+/**\r
+ This service switches the requested AP to be the BSP from that point onward.\r
+ This service changes the BSP for all purposes. This call can only be performed\r
+ by the current BSP.\r
+\r
+ This service switches the requested AP to be the BSP from that point onward.\r
+ This service changes the BSP for all purposes. The new BSP can take over the\r
+ execution of the old BSP and continue seamlessly from where the old one left\r
+ off.\r
+\r
+ If the BSP cannot be switched prior to the return from this service, then\r
+ EFI_UNSUPPORTED must be returned.\r
+\r
+ @param[in] This A pointer to the EDKII_PEI_MP_SERVICES2_PPI instance.\r
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
+ total number of logical processors minus 1. The total\r
+ number of logical processors can be retrieved by\r
+ EDKII_PEI_MP_SERVICES2_PPI.GetNumberOfProcessors().\r
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an enabled\r
+ AP. Otherwise, it will be disabled.\r
+\r
+ @retval EFI_SUCCESS BSP successfully switched.\r
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to this\r
+ service returning.\r
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or a disabled\r
+ AP.\r
+ @retval EFI_NOT_READY The specified AP is busy.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EdkiiPeiSwitchBSP (\r
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableOldBSP\r
+ )\r
+{\r
+ return MpInitLibSwitchBSP (ProcessorNumber, EnableOldBSP);\r
+}\r
+\r
+/**\r
+ This service lets the caller enable or disable an AP from this point onward.\r
+ This service may only be called from the BSP.\r
+\r
+ This service allows the caller enable or disable an AP from this point onward.\r
+ The caller can optionally specify the health status of the AP by Health. If\r
+ an AP is being disabled, then the state of the disabled AP is implementation\r
+ dependent. If an AP is enabled, then the implementation must guarantee that a\r
+ complete initialization sequence is performed on the AP, so the AP is in a state\r
+ that is compatible with an MP operating system.\r
+\r
+ If the enable or disable AP operation cannot be completed prior to the return\r
+ from this service, then EFI_UNSUPPORTED must be returned.\r
+\r
+ @param[in] This A pointer to the EDKII_PEI_MP_SERVICES2_PPI instance.\r
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
+ total number of logical processors minus 1. The total\r
+ number of logical processors can be retrieved by\r
+ EDKII_PEI_MP_SERVICES2_PPI.GetNumberOfProcessors().\r
+ @param[in] EnableAP Specifies the new state for the processor for enabled,\r
+ FALSE for disabled.\r
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies the\r
+ new health status of the AP. This flag corresponds to\r
+ StatusFlag defined in EDKII_PEI_MP_SERVICES2_PPI.GetProcessorInfo().\r
+ Only the PROCESSOR_HEALTH_STATUS_BIT is used. All other\r
+ bits are ignored. If it is NULL, this parameter is\r
+ ignored.\r
+\r
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.\r
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed prior\r
+ to this service returning.\r
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber\r
+ does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EdkiiPeiEnableDisableAP (\r
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableAP,\r
+ IN UINT32 *HealthFlag OPTIONAL\r
+ )\r
+{\r
+ return MpInitLibEnableDisableAP (ProcessorNumber, EnableAP, HealthFlag);\r
+}\r
+\r
+/**\r
+ This return the handle number for the calling processor. This service may be\r
+ called from the BSP and APs.\r
+\r
+ This service returns the processor handle number for the calling processor.\r
+ The returned value is in the range from 0 to the total number of logical\r
+ processors minus 1. The total number of logical processors can be retrieved\r
+ with EDKII_PEI_MP_SERVICES2_PPI.GetNumberOfProcessors(). This service may be\r
+ called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER\r
+ is returned. Otherwise, the current processors handle number is returned in\r
+ ProcessorNumber, and EFI_SUCCESS is returned.\r
+\r
+ @param[in] This A pointer to the EDKII_PEI_MP_SERVICES2_PPI instance.\r
+ @param[out] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
+ total number of logical processors minus 1. The total\r
+ number of logical processors can be retrieved by\r
+ EDKII_PEI_MP_SERVICES2_PPI.GetNumberOfProcessors().\r
+\r
+ @retval EFI_SUCCESS The current processor handle number was returned in\r
+ ProcessorNumber.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EdkiiPeiWhoAmI (\r
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,\r
+ OUT UINTN *ProcessorNumber\r
+ )\r
+{\r
+ return MpInitLibWhoAmI (ProcessorNumber);\r
+}\r
+\r
+/**\r
+ This service executes a caller provided function on all enabled CPUs. CPUs can\r
+ run either simultaneously or one at a time in sequence. This service may only\r
+ be called from the BSP.\r
+\r
+ @param[in] This A pointer to the EDKII_PEI_MP_SERVICES2_PPI instance.\r
+ @param[in] Procedure A pointer to the function to be run on enabled APs of\r
+ the system.\r
+ @param[in] TimeoutInMicroSeconds\r
+ Indicates the time limit in microseconds for APs to\r
+ return from Procedure, for blocking mode only. Zero\r
+ means infinity. If the timeout expires in blocking\r
+ mode, BSP returns EFI_TIMEOUT.\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for all CPUs.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before the\r
+ timeout expired.\r
+ @retval EFI_DEVICE_ERROR Caller processor is AP.\r
+ @retval EFI_NOT_READY Any enabled APs are busy.\r
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before all\r
+ enabled APs have finished.\r
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+EdkiiPeiStartupAllCPUs (\r
+ IN EDKII_PEI_MP_SERVICES2_PPI *This,\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN UINTN TimeoutInMicroSeconds,\r
+ IN VOID *ProcedureArgument OPTIONAL\r
+ )\r
+{\r
+ return MpInitLibStartupAllCPUs (\r
+ Procedure,\r
+ TimeoutInMicroSeconds,\r
+ ProcedureArgument\r
+ );\r
+}\r
+\r
+//\r
+// CPU MP2 PPI to be installed\r
+//\r
+EDKII_PEI_MP_SERVICES2_PPI mMpServices2Ppi = {\r
+ EdkiiPeiGetNumberOfProcessors,\r
+ EdkiiPeiGetProcessorInfo,\r
+ EdkiiPeiStartupAllAPs,\r
+ EdkiiPeiStartupThisAP,\r
+ EdkiiPeiSwitchBSP,\r
+ EdkiiPeiEnableDisableAP,\r
+ EdkiiPeiWhoAmI,\r
+ EdkiiPeiStartupAllCPUs\r
+};\r
+\r
projects / mirror_edk2.git / commitdiff