-#
-# Copyright (c) 2011, ARM Limited. All rights reserved.
-#
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-
-################################################################################
-#
-# FD Section
-# The [FD] Section is made up of the definition statements and a
-# description of what goes into the Flash Device Image. Each FD section
-# defines one flash "device" image. A flash device image may be one of
-# the following: Removable media bootable image (like a boot floppy
-# image,) an Option ROM image (that would be "flashed" into an add-in
-# card,) a System "Flash" image (that would be burned into a system's
-# flash) or an Update ("Capsule") image that will be used to update and
-# existing system flash.
-#
-################################################################################
-
-[FD.RTSM_VE_Cortex-A9_EFI]
-BaseAddress = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
-Size = 0x00280000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
-ErasePolarity = 1
-
-# This one is tricky, it must be: BlockSize * NumBlocks = Size
-BlockSize = 0x00001000
-NumBlocks = 0x280
-
-################################################################################
-#
-# Following are lists of FD Region layout which correspond to the locations of different
-# images within the flash device.
-#
-# Regions must be defined in ascending order and may not overlap.
-#
-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
-# the pipe "|" character, followed by the size of the region, also in hex with the leading
-# "0x" characters. Like:
-# Offset|Size
-# PcdOffsetCName|PcdSizeCName
-# RegionType <FV, DATA, or FILE>
-#
-################################################################################
-
-0x00000000|0x00080000
-gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
-FV = FVMAIN_SEC
-
-0x00080000|0x00280000
-gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
-FV = FVMAIN_COMPACT
-
-
-################################################################################
-#
-# FV Section
-#
-# [FV] section is used to define what components or modules are placed within a flash
-# device file. This section also defines order the components and modules are positioned
-# within the image. The [FV] section consists of define statements, set statements and
-# module statements.
-#
-################################################################################
-
-[FV.FVMAIN_SEC]
-FvAlignment = 8
-ERASE_POLARITY = 1
-MEMORY_MAPPED = TRUE
-STICKY_WRITE = TRUE
-LOCK_CAP = TRUE
-LOCK_STATUS = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP = TRUE
-WRITE_STATUS = TRUE
-WRITE_LOCK_CAP = TRUE
-WRITE_LOCK_STATUS = TRUE
-READ_DISABLED_CAP = TRUE
-READ_ENABLED_CAP = TRUE
-READ_STATUS = TRUE
-READ_LOCK_CAP = TRUE
-READ_LOCK_STATUS = TRUE
-
- INF ArmPlatformPkg/Sec/Sec.inf
-
-
-[FV.FvMain]
-BlockSize = 0x40
-NumBlocks = 0 # This FV gets compressed so make it just big enough
-FvAlignment = 8 # FV alignment and FV attributes setting.
-ERASE_POLARITY = 1
-MEMORY_MAPPED = TRUE
-STICKY_WRITE = TRUE
-LOCK_CAP = TRUE
-LOCK_STATUS = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP = TRUE
-WRITE_STATUS = TRUE
-WRITE_LOCK_CAP = TRUE
-WRITE_LOCK_STATUS = TRUE
-READ_DISABLED_CAP = TRUE
-READ_ENABLED_CAP = TRUE
-READ_STATUS = TRUE
-READ_LOCK_CAP = TRUE
-READ_LOCK_STATUS = TRUE
-
- INF MdeModulePkg/Core/Dxe/DxeMain.inf
-
- #
- # PI DXE Drivers producing Architectural Protocols (EFI Services)
- #
- INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
- INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
- INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
- INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
- INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
- INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
- INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
- INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
- INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
- INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
-
- INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
-
- #
- # Multiple Console IO support
- #
- INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
- INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
- INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
- INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
- INF EmbeddedPkg/SerialDxe/SerialDxe.inf
-
- INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
- INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf
- INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
- INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
- INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
-
- #
- # Semi-hosting filesystem
- #
- INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
-
- #
- # FAT filesystem + GPT/MBR partitioning
- #
- INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
- INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
- INF FatPkg/EnhancedFatDxe/Fat.inf
- INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
-
- #
- # UEFI application (Shell Embedded Boot Loader)
- #
- INF EmbeddedPkg/Ebl/Ebl.inf
-
-!if $(EDK2_ARMVE_UEFI2_SHELL) == 1
- INF ShellPkg/Application/Shell/Shell.inf
-!endif
-
- #
- # Bds
- #
- INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
- INF ArmPlatformPkg/Bds/Bds.inf
-
-
-[FV.FVMAIN_COMPACT]
-FvAlignment = 8
-ERASE_POLARITY = 1
-MEMORY_MAPPED = TRUE
-STICKY_WRITE = TRUE
-LOCK_CAP = TRUE
-LOCK_STATUS = TRUE
-WRITE_DISABLED_CAP = TRUE
-WRITE_ENABLED_CAP = TRUE
-WRITE_STATUS = TRUE
-WRITE_LOCK_CAP = TRUE
-WRITE_LOCK_STATUS = TRUE
-READ_DISABLED_CAP = TRUE
-READ_ENABLED_CAP = TRUE
-READ_STATUS = TRUE
-READ_LOCK_CAP = TRUE
-READ_LOCK_STATUS = TRUE
-
-!if $(EDK2_SKIP_PEICORE) == 1
- INF ArmPlatformPkg/PrePi/PeiMPCore.inf
-!else
- INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf
- INF MdeModulePkg/Core/Pei/PeiMain.inf
- INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
- INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
- INF ArmPkg/Drivers/CpuPei/CpuPei.inf
- INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
- INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
- INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
- INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
-!endif
-
- FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
- SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
- SECTION FV_IMAGE = FVMAIN
- }
- }
-
-
-################################################################################
-#
-# Rules are use with the [FV] section's module INF type to define
-# how an FFS file is created for a given INF file. The following Rule are the default
-# rules for the different module type. User can add the customized rules to define the
-# content of the FFS file.
-#
-################################################################################
-
-
-############################################################################
-# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
-############################################################################
-#
-#[Rule.Common.DXE_DRIVER]
-# FILE DRIVER = $(NAMED_GUID) {
-# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
-# COMPRESS PI_STD {
-# GUIDED {
-# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
-# UI STRING="$(MODULE_NAME)" Optional
-# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
-# }
-# }
-# }
-#
-############################################################################
-
-[Rule.Common.SEC]
- FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
- TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- }
-
-[Rule.Common.PEI_CORE]
- FILE PEI_CORE = $(NAMED_GUID) {
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING ="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.PEIM]
- FILE PEIM = $(NAMED_GUID) {
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.PEIM.TIANOCOMPRESSED]
- FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
- }
-
-[Rule.Common.DXE_CORE]
- FILE DXE_CORE = $(NAMED_GUID) {
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.UEFI_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.DXE_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.DXE_RUNTIME_DRIVER]
- FILE DRIVER = $(NAMED_GUID) {
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- UI STRING="$(MODULE_NAME)" Optional
- }
-
-[Rule.Common.UEFI_APPLICATION]
- FILE APPLICATION = $(NAMED_GUID) {
- UI STRING ="$(MODULE_NAME)" Optional
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
- }
+#\r
+# Copyright (c) 2011, ARM Limited. All rights reserved.\r
+# \r
+# This program and the accompanying materials \r
+# are licensed and made available under the terms and conditions of the BSD License \r
+# which accompanies this distribution. The full text of the license may be found at \r
+# http://opensource.org/licenses/bsd-license.php \r
+#\r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+#\r
+\r
+################################################################################\r
+#\r
+# FD Section\r
+# The [FD] Section is made up of the definition statements and a\r
+# description of what goes into the Flash Device Image. Each FD section\r
+# defines one flash "device" image. A flash device image may be one of\r
+# the following: Removable media bootable image (like a boot floppy\r
+# image,) an Option ROM image (that would be "flashed" into an add-in\r
+# card,) a System "Flash" image (that would be burned into a system's\r
+# flash) or an Update ("Capsule") image that will be used to update and\r
+# existing system flash.\r
+#\r
+################################################################################\r
+\r
+[FD.RTSM_VE_Cortex-A9_EFI]\r
+BaseAddress = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.\r
+Size = 0x00280000|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
+ErasePolarity = 1\r
+\r
+# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
+BlockSize = 0x00001000\r
+NumBlocks = 0x280\r
+\r
+################################################################################\r
+#\r
+# Following are lists of FD Region layout which correspond to the locations of different\r
+# images within the flash device.\r
+#\r
+# Regions must be defined in ascending order and may not overlap.\r
+#\r
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
+# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
+# "0x" characters. Like:\r
+# Offset|Size\r
+# PcdOffsetCName|PcdSizeCName\r
+# RegionType <FV, DATA, or FILE>\r
+#\r
+################################################################################\r
+\r
+0x00000000|0x00080000\r
+gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize\r
+FV = FVMAIN_SEC\r
+\r
+0x00080000|0x00280000\r
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
+FV = FVMAIN_COMPACT\r
+\r
+\r
+################################################################################\r
+#\r
+# FV Section\r
+#\r
+# [FV] section is used to define what components or modules are placed within a flash\r
+# device file. This section also defines order the components and modules are positioned\r
+# within the image. The [FV] section consists of define statements, set statements and\r
+# module statements.\r
+#\r
+################################################################################\r
+\r
+[FV.FVMAIN_SEC]\r
+FvAlignment = 8\r
+ERASE_POLARITY = 1\r
+MEMORY_MAPPED = TRUE\r
+STICKY_WRITE = TRUE\r
+LOCK_CAP = TRUE\r
+LOCK_STATUS = TRUE\r
+WRITE_DISABLED_CAP = TRUE\r
+WRITE_ENABLED_CAP = TRUE\r
+WRITE_STATUS = TRUE\r
+WRITE_LOCK_CAP = TRUE\r
+WRITE_LOCK_STATUS = TRUE\r
+READ_DISABLED_CAP = TRUE\r
+READ_ENABLED_CAP = TRUE\r
+READ_STATUS = TRUE\r
+READ_LOCK_CAP = TRUE\r
+READ_LOCK_STATUS = TRUE\r
+\r
+ INF ArmPlatformPkg/Sec/Sec.inf\r
+\r
+\r
+[FV.FvMain]\r
+BlockSize = 0x40\r
+NumBlocks = 0 # This FV gets compressed so make it just big enough\r
+FvAlignment = 8 # FV alignment and FV attributes setting.\r
+ERASE_POLARITY = 1\r
+MEMORY_MAPPED = TRUE\r
+STICKY_WRITE = TRUE\r
+LOCK_CAP = TRUE\r
+LOCK_STATUS = TRUE\r
+WRITE_DISABLED_CAP = TRUE\r
+WRITE_ENABLED_CAP = TRUE\r
+WRITE_STATUS = TRUE\r
+WRITE_LOCK_CAP = TRUE\r
+WRITE_LOCK_STATUS = TRUE\r
+READ_DISABLED_CAP = TRUE\r
+READ_ENABLED_CAP = TRUE\r
+READ_STATUS = TRUE\r
+READ_LOCK_CAP = TRUE\r
+READ_LOCK_STATUS = TRUE\r
+\r
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
+\r
+ #\r
+ # PI DXE Drivers producing Architectural Protocols (EFI Services) \r
+ #\r
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
+ INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
+ INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
+ INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
+\r
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
+ \r
+ #\r
+ # Multiple Console IO support\r
+ #\r
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
+ INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
+ INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
+ INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
+\r
+ INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf\r
+ INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf\r
+ INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
+ INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf\r
+ INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf\r
+\r
+ #\r
+ # Semi-hosting filesystem\r
+ #\r
+ INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
+ \r
+ #\r
+ # FAT filesystem + GPT/MBR partitioning\r
+ #\r
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
+ INF FatPkg/EnhancedFatDxe/Fat.inf\r
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
+\r
+ #\r
+ # UEFI application (Shell Embedded Boot Loader) \r
+ # \r
+ INF EmbeddedPkg/Ebl/Ebl.inf\r
+ \r
+!if $(EDK2_ARMVE_UEFI2_SHELL) == 1\r
+ INF ShellPkg/Application/Shell/Shell.inf\r
+!endif\r
+ \r
+ #\r
+ # Bds\r
+ #\r
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
+ INF ArmPlatformPkg/Bds/Bds.inf\r
+\r
+\r
+[FV.FVMAIN_COMPACT]\r
+FvAlignment = 8\r
+ERASE_POLARITY = 1\r
+MEMORY_MAPPED = TRUE\r
+STICKY_WRITE = TRUE\r
+LOCK_CAP = TRUE\r
+LOCK_STATUS = TRUE\r
+WRITE_DISABLED_CAP = TRUE\r
+WRITE_ENABLED_CAP = TRUE\r
+WRITE_STATUS = TRUE\r
+WRITE_LOCK_CAP = TRUE\r
+WRITE_LOCK_STATUS = TRUE\r
+READ_DISABLED_CAP = TRUE\r
+READ_ENABLED_CAP = TRUE\r
+READ_STATUS = TRUE\r
+READ_LOCK_CAP = TRUE\r
+READ_LOCK_STATUS = TRUE\r
+\r
+!if $(EDK2_SKIP_PEICORE) == 1\r
+ INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
+!else\r
+ INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf\r
+ INF MdeModulePkg/Core/Pei/PeiMain.inf\r
+ INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
+ INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
+ INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
+ INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
+ INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
+ INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
+ INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
+!endif\r
+ \r
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
+ SECTION FV_IMAGE = FVMAIN\r
+ }\r
+ }\r
+\r
+\r
+################################################################################\r
+#\r
+# Rules are use with the [FV] section's module INF type to define\r
+# how an FFS file is created for a given INF file. The following Rule are the default\r
+# rules for the different module type. User can add the customized rules to define the\r
+# content of the FFS file.\r
+#\r
+################################################################################\r
+\r
+\r
+############################################################################\r
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # \r
+############################################################################\r
+#\r
+#[Rule.Common.DXE_DRIVER]\r
+# FILE DRIVER = $(NAMED_GUID) {\r
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+# COMPRESS PI_STD {\r
+# GUIDED {\r
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+# UI STRING="$(MODULE_NAME)" Optional\r
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
+# }\r
+# }\r
+# }\r
+#\r
+############################################################################\r
+\r
+[Rule.Common.SEC]\r
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
+ TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ }\r
+\r
+[Rule.Common.PEI_CORE]\r
+ FILE PEI_CORE = $(NAMED_GUID) {\r
+ TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ UI STRING ="$(MODULE_NAME)" Optional \r
+ }\r
+\r
+[Rule.Common.PEIM]\r
+ FILE PEIM = $(NAMED_GUID) {\r
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ UI STRING="$(MODULE_NAME)" Optional \r
+ }\r
+\r
+[Rule.Common.PEIM.TIANOCOMPRESSED]\r
+ FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ UI STRING="$(MODULE_NAME)" Optional\r
+ }\r
+ }\r
+\r
+[Rule.Common.DXE_CORE]\r
+ FILE DXE_CORE = $(NAMED_GUID) {\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ UI STRING="$(MODULE_NAME)" Optional\r
+ }\r
+\r
+[Rule.Common.UEFI_DRIVER]\r
+ FILE DRIVER = $(NAMED_GUID) {\r
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ UI STRING="$(MODULE_NAME)" Optional\r
+ }\r
+\r
+[Rule.Common.DXE_DRIVER]\r
+ FILE DRIVER = $(NAMED_GUID) {\r
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ UI STRING="$(MODULE_NAME)" Optional\r
+ }\r
+\r
+[Rule.Common.DXE_RUNTIME_DRIVER]\r
+ FILE DRIVER = $(NAMED_GUID) {\r
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ UI STRING="$(MODULE_NAME)" Optional\r
+ }\r
+\r
+[Rule.Common.UEFI_APPLICATION]\r
+ FILE APPLICATION = $(NAMED_GUID) {\r
+ UI STRING ="$(MODULE_NAME)" Optional \r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ }\r
projects / mirror_edk2.git / commitdiff