From: Ruiyu Ni Date: Tue, 8 Nov 2016 02:35:22 +0000 (+0800) Subject: MdeModulePkg/PciSioSerial: Fix a bug that wrongly produces 2 UARTs X-Git-Tag: edk2-stable201903~5238 X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=commitdiff_plain;h=4ab04a72f52e4d12a0c30b20e577e688b786e4fd MdeModulePkg/PciSioSerial: Fix a bug that wrongly produces 2 UARTs When PciSioSerial is firstly started with a non-NULL remaining device path, the UART instance is created using the parameters specified in the remaining device path. Later when the driver is started again on the same UART controller with NULL remaining device path, the correct logic is to directly return SUCCESS instead of current buggy implementation which wrongly produces another UART using the default parameters. The bug causes two UARTs are created when the UART is configured in 57600 baud rate. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni Reviewed-by: Star Zeng Cc: Eric Dong --- diff --git a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c index aeafee247c..a48783660e 100644 --- a/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c +++ b/MdeModulePkg/Bus/Pci/PciSioSerialDxe/Serial.c @@ -1,7 +1,7 @@ /** @file Serial driver for PCI or SIO UARTS. -Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.
+Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.
This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at @@ -863,67 +863,75 @@ SerialControllerDriverStart ( ControllerNumber = 0; ContainsControllerNode = FALSE; SerialDevices = GetChildSerialDevices (Controller, IoProtocolGuid, &SerialDeviceCount); - // - // If the SerialIo instance specified by RemainingDevicePath is already created, - // update the attributes/control. - // - if ((SerialDeviceCount != 0) && (RemainingDevicePath != NULL)) { - Uart = (UART_DEVICE_PATH *) SkipControllerDevicePathNode (RemainingDevicePath, &ContainsControllerNode, &ControllerNumber); - for (Index = 0; Index < SerialDeviceCount; Index++) { - ASSERT ((SerialDevices != NULL) && (SerialDevices[Index] != NULL)); - if ((!SerialDevices[Index]->ContainsControllerNode && !ContainsControllerNode) || - (SerialDevices[Index]->ContainsControllerNode && ContainsControllerNode && SerialDevices[Index]->Instance == ControllerNumber) - ) { - SerialIo = &SerialDevices[Index]->SerialIo; - Status = EFI_INVALID_PARAMETER; - // - // Pass NULL ActualBaudRate to VerifyUartParameters to disallow baudrate degrade. - // DriverBindingStart() shouldn't create a handle with different UART device path. - // - if (VerifyUartParameters (SerialDevices[Index]->ClockRate, Uart->BaudRate, Uart->DataBits, - (EFI_PARITY_TYPE) Uart->Parity, (EFI_STOP_BITS_TYPE) Uart->StopBits, NULL, NULL)) { - Status = SerialIo->SetAttributes ( - SerialIo, - Uart->BaudRate, - SerialIo->Mode->ReceiveFifoDepth, - SerialIo->Mode->Timeout, - (EFI_PARITY_TYPE) Uart->Parity, - Uart->DataBits, - (EFI_STOP_BITS_TYPE) Uart->StopBits - ); - } - FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart); - if (!EFI_ERROR (Status) && IsUartFlowControlDevicePathNode (FlowControl)) { - Status = SerialIo->GetControl (SerialIo, &Control); - if (!EFI_ERROR (Status)) { - if (ReadUnaligned32 (&FlowControl->FlowControlMap) == UART_FLOW_CONTROL_HARDWARE) { - Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; - } else { - Control &= ~EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; + + if (SerialDeviceCount != 0) { + if (RemainingDevicePath == NULL) { + // + // If the SerialIo instance is already created, NULL as RemainingDevicePath is treated + // as to create the same SerialIo instance. + // + return EFI_SUCCESS; + } else { + // + // Update the attributes/control of the SerialIo instance specified by RemainingDevicePath. + // + Uart = (UART_DEVICE_PATH *) SkipControllerDevicePathNode (RemainingDevicePath, &ContainsControllerNode, &ControllerNumber); + for (Index = 0; Index < SerialDeviceCount; Index++) { + ASSERT ((SerialDevices != NULL) && (SerialDevices[Index] != NULL)); + if ((!SerialDevices[Index]->ContainsControllerNode && !ContainsControllerNode) || + (SerialDevices[Index]->ContainsControllerNode && ContainsControllerNode && SerialDevices[Index]->Instance == ControllerNumber) + ) { + SerialIo = &SerialDevices[Index]->SerialIo; + Status = EFI_INVALID_PARAMETER; + // + // Pass NULL ActualBaudRate to VerifyUartParameters to disallow baudrate degrade. + // DriverBindingStart() shouldn't create a handle with different UART device path. + // + if (VerifyUartParameters (SerialDevices[Index]->ClockRate, Uart->BaudRate, Uart->DataBits, + (EFI_PARITY_TYPE) Uart->Parity, (EFI_STOP_BITS_TYPE) Uart->StopBits, NULL, NULL)) { + Status = SerialIo->SetAttributes ( + SerialIo, + Uart->BaudRate, + SerialIo->Mode->ReceiveFifoDepth, + SerialIo->Mode->Timeout, + (EFI_PARITY_TYPE) Uart->Parity, + Uart->DataBits, + (EFI_STOP_BITS_TYPE) Uart->StopBits + ); + } + FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart); + if (!EFI_ERROR (Status) && IsUartFlowControlDevicePathNode (FlowControl)) { + Status = SerialIo->GetControl (SerialIo, &Control); + if (!EFI_ERROR (Status)) { + if (ReadUnaligned32 (&FlowControl->FlowControlMap) == UART_FLOW_CONTROL_HARDWARE) { + Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; + } else { + Control &= ~EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE; + } + // + // Clear the bits that are not allowed to pass to SetControl + // + Control &= (EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY | + EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE | + EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE); + Status = SerialIo->SetControl (SerialIo, Control); } - // - // Clear the bits that are not allowed to pass to SetControl - // - Control &= (EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY | - EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE | - EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE); - Status = SerialIo->SetControl (SerialIo, Control); } + break; } - break; } - } - if (Index != SerialDeviceCount) { - // - // Directly return if the SerialIo instance specified by RemainingDevicePath is found and updated. - // Otherwise continue to create the instance specified by RemainingDevicePath. - // - if (SerialDevices != NULL) { - FreePool (SerialDevices); + if (Index != SerialDeviceCount) { + // + // Directly return if the SerialIo instance specified by RemainingDevicePath is found and updated. + // Otherwise continue to create the instance specified by RemainingDevicePath. + // + if (SerialDevices != NULL) { + FreePool (SerialDevices); + } + return Status; } - return Status; } - } + } if (RemainingDevicePath != NULL) { Uart = (UART_DEVICE_PATH *) SkipControllerDevicePathNode (RemainingDevicePath, &ContainsControllerNode, &ControllerNumber);