From: oliviermartin <oliviermartin@6f19259b-4bc3-4df7-8a09-765794883524>
Date: Mon, 15 Aug 2011 16:44:05 +0000 (+0000)
Subject: Omap35xxPkg: Turn on the power for the USB Hub
X-Git-Tag: edk2-stable201903~14400
X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=commitdiff_plain;h=6b73be803b7a43035b673c9a8f7cd19420a1c331

Omap35xxPkg: Turn on the power for the USB Hub

This fix should make the USB Hub power up correctly (tested on BeagleBoard-xM).



git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@12134 6f19259b-4bc3-4df7-8a09-765794883524
---

diff --git a/Omap35xxPkg/Include/TPS65950.h b/Omap35xxPkg/Include/TPS65950.h
index ee26a0368a..8ba9dbaf2f 100644
--- a/Omap35xxPkg/Include/TPS65950.h
+++ b/Omap35xxPkg/Include/TPS65950.h
@@ -50,4 +50,11 @@
 #define LEDAPWM               BIT4
 #define LEDBPWM               BIT5
 
+// USB PHY power
+#define VAUX2_DEDICATED       0x79
+#define VAUX2_DEV_GRP         0x76
+
+#define VAUX_DEV_GRP_P1       0x20
+#define VAUX_DEDICATED_18V    0x05
+
 #endif //__TPS65950_H__
diff --git a/Omap35xxPkg/PciEmulation/PciEmulation.c b/Omap35xxPkg/PciEmulation/PciEmulation.c
index dd5e8f7b67..6b5528cea4 100644
--- a/Omap35xxPkg/PciEmulation/PciEmulation.c
+++ b/Omap35xxPkg/PciEmulation/PciEmulation.c
@@ -60,7 +60,7 @@ ConfigureUSBHost (
   EFI_STATUS Status;
   UINT8      Data = 0;
 
-   // Take USB host out of force-standby mode
+  // Take USB host out of force-standby mode
   MmioWrite32 (UHH_SYSCONFIG, UHH_SYSCONFIG_MIDLEMODE_NO_STANDBY
                             | UHH_SYSCONFIG_CLOCKACTIVITY_ON
                             | UHH_SYSCONFIG_SIDLEMODE_NO_STANDBY
@@ -77,22 +77,32 @@ ConfigureUSBHost (
                              | UHH_HOSTCONFIG_P1_ULPI_BYPASS_ULPI_MODE);
 
   // USB reset (GPIO 147 - Port 5 pin 19) output high
-  MmioAnd32(GPIO5_BASE + GPIO_OE, ~BIT19);
+  MmioAnd32 (GPIO5_BASE + GPIO_OE, ~BIT19);
   MmioWrite32 (GPIO5_BASE + GPIO_SETDATAOUT, BIT19);
 
-  // Get the Power IC protocol.
-  Status = gBS->LocateProtocol(&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
-  ASSERT_EFI_ERROR(Status);
+  // Get the Power IC protocol
+  Status = gBS->LocateProtocol (&gEmbeddedExternalDeviceProtocolGuid, NULL, (VOID **)&gTPS65950);
+  ASSERT_EFI_ERROR (Status);  
 
-  //Enable power to the USB host.
-  Status = gTPS65950->Read(gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data);
+  // Power the USB PHY
+  Data = VAUX_DEV_GRP_P1;
+  Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VAUX2_DEV_GRP), 1, &Data);
   ASSERT_EFI_ERROR(Status);
 
-  //LEDAON & LEDAPWM control the power to the USB host so enable those bits.
-  Data |= (LEDAON | LEDAPWM);
+  Data = VAUX_DEDICATED_18V;
+  Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID4, VAUX2_DEDICATED), 1, &Data);
+  ASSERT_EFI_ERROR (Status);  
 
-  Status = gTPS65950->Write(gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data);
-  ASSERT_EFI_ERROR(Status);
+  // Enable power to the USB hub
+  Status = gTPS65950->Read (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data);
+  ASSERT_EFI_ERROR (Status);
+
+  // LEDAON controls the power to the USB host, PWM is disabled
+  Data &= ~LEDAPWM;
+  Data |= LEDAON;
+
+  Status = gTPS65950->Write (gTPS65950, EXTERNAL_DEVICE_REGISTER(I2C_ADDR_GRP_ID3, LEDEN), 1, &Data);
+  ASSERT_EFI_ERROR (Status);
 }