From: Antoine Coeur Date: Wed, 6 Feb 2019 15:48:50 +0000 (+0100) Subject: ArmVirtPkg: Fix various typos X-Git-Tag: edk2-stable201903~184 X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=commitdiff_plain;h=7a90895306acbf970de87e8020f8c6dc22ce8fb3 ArmVirtPkg: Fix various typos Fix various typos in ArmVirtPkg. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Coeur Reviewed-by: Laszlo Ersek Reviewed-by: Philippe Mathieu-Daude --- diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc index c47955be94..304a4b4d21 100644 --- a/ArmVirtPkg/ArmVirt.dsc.inc +++ b/ArmVirtPkg/ArmVirt.dsc.inc @@ -333,7 +333,7 @@ # Values are in EFI Pages (4K). DXE Core will make sure that # at least this much of each type of memory can be allocated # from a single memory range. This way you only end up with - # maximum of two fragements for each type in the memory map + # maximum of two fragments for each type in the memory map # (the memory used, and the free memory that was prereserved # but not used). # diff --git a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c index 73a0fbd8a4..758bc91ab1 100644 --- a/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c +++ b/ArmVirtPkg/Library/ArmVirtDxeHobLib/HobLib.c @@ -1,5 +1,5 @@ /** @file - HOB Library implemenation for Dxe Phase with DebugLib dependency removed + HOB Library implementation for Dxe Phase with DebugLib dependency removed Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.
Copyright (c) 2014, Linaro Ltd. All rights reserved.
diff --git a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c index 6479f53b37..a083826bab 100644 --- a/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c +++ b/ArmVirtPkg/Library/BaseCachingPciExpressLib/PciExpressLib.c @@ -1238,7 +1238,7 @@ PciExpressBitFieldAndThenOr32 ( Size into the buffer specified by Buffer. This function only allows the PCI configuration registers from a single PCI function to be read. Size is returned. When possible 32-bit PCI configuration read cycles are used to read - from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit + from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit and 16-bit PCI configuration read cycles may be used at the beginning and the end of the range. @@ -1338,7 +1338,7 @@ PciExpressReadBuffer ( Size from the buffer specified by Buffer. This function only allows the PCI configuration registers from a single PCI function to be written. Size is returned. When possible 32-bit PCI configuration write cycles are used to - write from StartAdress to StartAddress + Size. Due to alignment restrictions, + write from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit and 16-bit PCI configuration write cycles may be used at the beginning and the end of the range. diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c index f0924dacbc..16c0e61816 100644 --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/EarlyFdtPL011SerialPortLib.c @@ -234,13 +234,13 @@ SerialPortGetControl ( } /** - Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, + Sets the baud rate, receive FIFO depth, transmit/receive time out, parity, data bits, and stop bits on a serial device. @param BaudRate The requested baud rate. A BaudRate value of 0 will use the device's default interface speed. On output, the value actually set. - @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the + @param ReceiveFifoDepth The requested depth of the FIFO on the receive side of the serial interface. A ReceiveFifoDepth value of 0 will use the device's default FIFO depth. On output, the value actually set. @@ -253,7 +253,7 @@ SerialPortGetControl ( DefaultParity will use the device's default parity value. On output, the value actually set. @param DataBits The number of data bits to use on the serial device. A DataBits - vaule of 0 will use the device's default data bit setting. + value of 0 will use the device's default data bit setting. On output, the value actually set. @param StopBits The number of stop bits to use on this serial device. A StopBits value of DefaultStopBits will use the device's default number of diff --git a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c index 8b736fd11f..2f10fb7b91 100644 --- a/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c +++ b/ArmVirtPkg/Library/FdtPL011SerialPortLib/FdtPL011SerialPortLib.c @@ -156,13 +156,13 @@ SerialPortPoll ( } /** - Sets the baud rate, receive FIFO depth, transmit/receice time out, parity, + Sets the baud rate, receive FIFO depth, transmit/receive time out, parity, data bits, and stop bits on a serial device. @param BaudRate The requested baud rate. A BaudRate value of 0 will use the device's default interface speed. On output, the value actually set. - @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the + @param ReceiveFifoDepth The requested depth of the FIFO on the receive side of the serial interface. A ReceiveFifoDepth value of 0 will use the device's default FIFO depth. On output, the value actually set. @@ -175,7 +175,7 @@ SerialPortPoll ( DefaultParity will use the device's default parity value. On output, the value actually set. @param DataBits The number of data bits to use on the serial device. A DataBits - vaule of 0 will use the device's default data bit setting. + value of 0 will use the device's default data bit setting. On output, the value actually set. @param StopBits The number of stop bits to use on this serial device. A StopBits value of DefaultStopBits will use the device's default number of diff --git a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c index bb07f5e22b..534357eff4 100644 --- a/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c +++ b/ArmVirtPkg/Library/PlatformBootManagerLib/PlatformBm.c @@ -779,11 +779,11 @@ PlatformBootManagerBeforeConsole ( Do the platform specific action after the console is ready Possible things that can be done in PlatformBootManagerAfterConsole: > Console post action: - > Dynamically switch output mode from 100x31 to 80x25 for certain senarino + > Dynamically switch output mode from 100x31 to 80x25 for certain scenario > Signal console ready platform customized event > Run diagnostics like memory testing > Connect certain devices - > Dispatch aditional option roms + > Dispatch additional option roms > Special boot: e.g.: USB boot, enter UI **/ VOID