From: jiaxinwu Date: Mon, 8 Jun 2015 02:04:06 +0000 (+0000) Subject: MdePkg: Add header files for DNS/HTTP/IP4Config2. X-Git-Tag: edk2-stable201903~9693 X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=commitdiff_plain;h=cff298f44cbb3d592f7673f420315f0a4499153f MdePkg: Add header files for DNS/HTTP/IP4Config2. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: jiaxinwu Reviewed-by: Ye Ting Reviewed-by: Fu Siyuan git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17567 6f19259b-4bc3-4df7-8a09-765794883524 --- diff --git a/MdePkg/Include/Protocol/Dns4.h b/MdePkg/Include/Protocol/Dns4.h new file mode 100644 index 0000000000..3e7cdaaf2c --- /dev/null +++ b/MdePkg/Include/Protocol/Dns4.h @@ -0,0 +1,544 @@ +/** @file + This file defines the EFI Domain Name Service Binding Protocol interface. It is split + into the following two main sections: + DNSv4 Service Binding Protocol (DNSv4SB) + DNSv4 Protocol (DNSv4) + + Copyright (c) 2015, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Revision Reference: + This Protocol is introduced in UEFI Specification 2.5 + +**/ + +#ifndef __EFI_DNS4_PROTOCOL_H__ +#define __EFI_DNS4_PROTOCOL_H__ + +#define EFI_DNS4_SERVICE_BINDING_PROTOCOL_GUID \ + { \ + 0xb625b186, 0xe063, 0x44f7, {0x89, 0x5, 0x6a, 0x74, 0xdc, 0x6f, 0x52, 0xb4 } \ + } + +#define EFI_DNS4_PROTOCOL_GUID \ + { \ + 0xae3d28cc, 0xe05b, 0x4fa1, {0xa0, 0x11, 0x7e, 0xb5, 0x5a, 0x3f, 0x14, 0x1 } \ + } + +typedef struct _EFI_DNS4_PROTOCOL EFI_DNS4_PROTOCOL; + +/// +/// EFI_DNS4_CONFIG_DATA +/// +typedef struct { + /// + /// Count of the DNS servers. When used with GetModeData(), + /// this field is the count of originally configured servers when + /// Configure() was called for this instance. When used with + /// Configure() this is the count of caller-supplied servers. If the + /// DnsServerListCount is zero, the DNS server configuration + /// will be retrieved from DHCP server automatically. + /// + UINTN DnsServerListCount; + /// + /// Pointer to DNS server list containing DnsServerListCount entries or NULL + /// if DnsServerListCountis 0. For Configure(), this will be NULL when there are + /// no caller supplied server addresses, and, the DNS instance will retrieve + /// DNS server from DHCP Server. The provided DNS server list is + /// recommended to be filled up in the sequence of preference. When + /// used with GetModeData(), the buffer containing the list will + /// be allocated by the driver implementing this protocol and must be + /// freed by the caller. When used with Configure(), the buffer + /// containing the list will be allocated and released by the caller. + /// + EFI_IPv4_ADDRESS *DnsServerList; + /// + /// Set to TRUE to use the default IP address/subnet mask and default routing table. + /// + BOOLEAN UseDefaultSetting; + /// + /// If TRUE, enable DNS cache function for this DNS instance. If FALSE, all DNS + /// query will not lookup local DNS cache. + /// + BOOLEAN EnableDnsCache; + /// + /// Use the protocol number defined in "Links to UEFI-Related + /// Documents"(http://uefi.org/uefi) under the heading "IANA + /// Protocol Numbers". Only TCP or UDP are supported, and other + /// protocol values are invalid. An implementation can choose to + /// support only UDP, or both TCP and UDP. + /// + UINT8 Protocol; + /// + /// If UseDefaultSetting is FALSE indicates the station address to use. + /// + EFI_IPv4_ADDRESS StationIp; + /// + /// If UseDefaultSetting is FALSE indicates the subnet mask to use. + /// + EFI_IPv4_ADDRESS SubnetMask; + /// + /// Local port number. Set to zero to use the automatically assigned port number. + /// + UINT16 LocalPort; + /// + /// Retry number if no response received after RetryInterval. + /// + UINT32 RetryCount; + /// + /// Minimum interval of retry is 2 second. If the retry interval is less than 2 + /// seconds, then use the 2 seconds. + /// + UINT32 RetryInterval; +} EFI_DNS4_CONFIG_DATA; + + +/// +/// EFI_DNS4_CACHE_ENTRY +/// +typedef struct { + /// + /// Host name. + /// + CHAR16 *HostName; + /// + /// IP address of this host. + /// + EFI_IPv4_ADDRESS *IpAddress; + /// + /// Time in second unit that this entry will remain in DNS cache. A value of zero + /// means that this entry is permanent. A nonzero value will override the existing + /// one if this entry to be added is dynamic entry. Implementations may set its + /// default timeout value for the dynamically created DNS cache entry after one DNS + /// resolve succeeds. + /// + UINT32 Timeout; +} EFI_DNS4_CACHE_ENTRY; + +/// +/// EFI_DNS4_MODE_DATA +/// +typedef struct { + /// + /// The configuration data of this instance. + /// + EFI_DNS4_CONFIG_DATA DnsConfigData; + /// + /// Number of configured DNS server. Each DNS instance has its own DNS server + /// configuration. + /// + UINT32 DnsServerCount; + /// + /// Pointer to common list of addresses of all configured DNS server + /// used by EFI_DNS4_PROTOCOL instances. List will include + /// DNS servers configured by this or any other EFI_DNS4_PROTOCOL instance. + /// The storage for this list is allocated by the driver publishing this + /// protocol, and must be freed by the caller. + /// + EFI_IPv4_ADDRESS *DnsServerList; + /// + /// Number of DNS Cache entries. The DNS Cache is shared among all DNS instances. + /// + UINT32 DnsCacheCount; + /// + /// Pointer to a buffer containing DnsCacheCount DNS Cache + /// entry structures. The storage for this list is allocated by the driver + /// publishing this protocol and must be freed by caller. + /// + EFI_DNS4_CACHE_ENTRY *DnsCacheList; +} EFI_DNS4_MODE_DATA; + +/// +/// DNS_HOST_TO_ADDR_DATA +/// +typedef struct { + /// + /// Number of the returned IP addresses. + /// + UINT32 IpCount; + /// + /// Pointer to the all the returned IP addresses. + /// + EFI_IPv4_ADDRESS *IpList; +} DNS_HOST_TO_ADDR_DATA; + +/// +/// DNS_ADDR_TO_HOST_DATA +/// +typedef struct { + /// + /// Pointer to the primary name for this host address. It's the caller's + /// responsibility to free the response memory. + /// + CHAR16 *HostName; +} DNS_ADDR_TO_HOST_DATA; + +/// +/// DNS_RESOURCE_RECORD +/// +typedef struct { + /// + /// The Owner name. + /// + CHAR8 *QName; + /// + /// The Type Code of this RR. + /// + UINT16 QType; + /// + /// The CLASS code of this RR. + /// + UINT16 QClass; + /// + /// 32 bit integer which specify the time interval that the resource record may be + /// cached before the source of the information should again be consulted. Zero means + /// this RR can not be cached. + /// + UINT32 TTL; + /// + /// 16 big integer which specify the length of RData. + /// + UINT16 DataLength; + /// + /// A string of octets that describe the resource, the format of this information + /// varies according to QType and QClass difference. + /// + CHAR8 *RData; +} DNS_RESOURCE_RECORD; + +/// +/// DNS_GENERAL_LOOKUP_DATA +/// +typedef struct { + /// + /// Number of returned matching RRs. + /// + UINTN RRCount; + /// + /// Pointer to the all the returned matching RRs. It's caller responsibility to free + /// the allocated memory to hold the returned RRs. + /// + DNS_RESOURCE_RECORD *RRList; +} DNS_GENERAL_LOOKUP_DATA; + +/// +/// EFI_DNS4_COMPLETION_TOKEN +/// +typedef struct { + /// + /// This Event will be signaled after the Status field is updated by the EFI DNS + /// protocol driver. The type of Event must be EFI_NOTIFY_SIGNAL. + /// + EFI_EVENT Event; + /// + /// Will be set to one of the following values: + /// EFI_SUCCESS: The host name to address translation completed successfully. + /// EFI_NOT_FOUND: No matching Resource Record (RR) is found. + /// EFI_TIMEOUT: No DNS server reachable, or RetryCount was exhausted without + /// response from all specified DNS servers. + /// EFI_DEVICE_ERROR: An unexpected system or network error occurred. + /// EFI_NO_MEDIA: There was a media error. + /// + EFI_STATUS Status; + /// + /// Retry number if no response received after RetryInterval. If zero, use the + /// parameter configured through Dns.Configure() interface. + /// + UINT32 RetryCount; + /// + /// Minimum interval of retry is 2 second. If the retry interval is less than 2 + /// seconds, then use the 2 seconds. If zero, use the parameter configured through + /// Dns.Configure() interface. + UINT32 RetryInterval; + /// + /// DNSv4 completion token data + /// + union { + /// + /// When the Token is used for host name to address translation, H2AData is a pointer + /// to the DNS_HOST_TO_ADDR_DATA. + /// + DNS_HOST_TO_ADDR_DATA *H2AData; + /// + /// When the Token is used for host address to host name translation, A2HData is a + /// pointer to the DNS_ADDR_TO_HOST_DATA. + /// + DNS_ADDR_TO_HOST_DATA *A2HData; + /// + /// When the Token is used for a general lookup function, GLookupDATA is a pointer to + /// the DNS_GENERAL_LOOKUP_DATA. + /// + DNS_GENERAL_LOOKUP_DATA *GLookupData; + } RspData; +} EFI_DNS4_COMPLETION_TOKEN; + +/** + Retrieve mode data of this DNS instance. + + This function is used to retrieve DNS mode data for this DNS instance. + + @param[in] This Pointer to EFI_DNS4_PROTOCOL instance. + @param[out] DnsModeData Point to the mode data. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_NOT_STARTED When DnsConfigData is queried, no configuration data + is available because this instance has not been + configured. + @retval EFI_INVALID_PARAMETER This is NULL or DnsModeData is NULL. + @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS4_GET_MODE_DATA) ( + IN EFI_DNS4_PROTOCOL *This, + OUT EFI_DNS4_MODE_DATA *DnsModeData + ); + +/** + Configure this DNS instance. + + This function is used to configure DNS mode data for this DNS instance. + + @param[in] This Pointer to EFI_DNS4_PROTOCOL instance. + @param[in] DnsConfigData Point to the Configuration data. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_UNSUPPORTED The designated protocol is not supported. + @retval EFI_INVALID_PARAMTER Thisis NULL. + The StationIp address provided in DnsConfigData is not a + valid unicast. + DnsServerList is NULL while DnsServerListCount + is not ZERO. + DnsServerListCount is ZERO while DnsServerList + is not NULL + @retval EFI_OUT_OF_RESOURCES The DNS instance data or required space could not be + allocated. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The + EFI DNSv4 Protocol instance is not configured. + @retval EFI_ALREADY_STARTED Second call to Configure() with DnsConfigData. To + reconfigure the instance the caller must call Configure() + with NULL first to return driver to unconfigured state. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS4_CONFIGURE) ( + IN EFI_DNS4_PROTOCOL *This, + IN EFI_DNS4_CONFIG_DATA *DnsConfigData + ); + +/** + Host name to host address translation. + + The HostNameToIp () function is used to translate the host name to host IP address. A + type A query is used to get the one or more IP addresses for this host. + + @param[in] This Pointer to EFI_DNS4_PROTOCOL instance. + @param[in] Hostname Host name. + @param[in] Token Point to the completion token to translate host name + to host address. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token is NULL. + Token.Event is NULL. + HostName is NULL. HostName string is unsupported format. + @retval EFI_NO_MAPPING There's no source address is available for use. + @retval EFI_NOT_STARTED This instance has not been started. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS4_HOST_NAME_TO_IP) ( + IN EFI_DNS4_PROTOCOL *This, + IN CHAR16 *HostName, + IN EFI_DNS4_COMPLETION_TOKEN *Token + ); + +/** + IPv4 address to host name translation also known as Reverse DNS lookup. + + The IpToHostName() function is used to translate the host address to host name. A type PTR + query is used to get the primary name of the host. Support of this function is optional. + + @param[in] This Pointer to EFI_DNS4_PROTOCOL instance. + @param[in] IpAddress Ip Address. + @param[in] Token Point to the completion token to translate host + address to host name. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_UNSUPPORTED This function is not supported. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token is NULL. + Token.Event is NULL. + IpAddress is not valid IP address . + @retval EFI_NO_MAPPING There's no source address is available for use. + @retval EFI_ALREADY_STARTED This Token is being used in another DNS session. + @retval EFI_NOT_STARTED This instance has not been started. + @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS4_IP_TO_HOST_NAME) ( + IN EFI_DNS4_PROTOCOL *This, + IN EFI_IPv4_ADDRESS IpAddress, + IN EFI_DNS4_COMPLETION_TOKEN *Token + ); + +/** + Retrieve arbitrary information from the DNS server. + + This GeneralLookup() function retrieves arbitrary information from the DNS. The caller + supplies a QNAME, QTYPE, and QCLASS, and all of the matching RRs are returned. All + RR content (e.g., TTL) was returned. The caller need parse the returned RR to get + required information. The function is optional. + + @param[in] This Pointer to EFI_DNS4_PROTOCOL instance. + @param[in] QName Pointer to Query Name. + @param[in] QType Query Type. + @param[in] QClass Query Name. + @param[in] Token Point to the completion token to retrieve arbitrary + information. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_UNSUPPORTED This function is not supported. Or the requested + QType is not supported + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token is NULL. + Token.Event is NULL. + QName is NULL. + @retval EFI_NO_MAPPING There's no source address is available for use. + @retval EFI_ALREADY_STARTED This Token is being used in another DNS session. + @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS4_GENERAL_LOOKUP) ( + IN EFI_DNS4_PROTOCOL *This, + IN CHAR8 *QName, + IN UINT16 QType, + IN UINT16 QClass, + IN EFI_DNS4_COMPLETION_TOKEN *Token + ); + +/** + This function is to update the DNS Cache. + + The UpdateDnsCache() function is used to add/delete/modify DNS cache entry. DNS cache + can be normally dynamically updated after the DNS resolve succeeds. This function + provided capability to manually add/delete/modify the DNS cache. + + @param[in] This Pointer to EFI_DNS4_PROTOCOL instance. + @param[in] DeleteFlag If FALSE, this function is to add one entry to the + DNS Cahce. If TRUE, this function will delete + matching DNS Cache entry. + @param[in] Override If TRUE, the maching DNS cache entry will be + overwritten with the supplied parameter. If FALSE, + EFI_ACCESS_DENIED will be returned if the entry to + be added is already existed. + @param[in] DnsCacheEntry Pointer to DNS Cache entry. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + DnsCacheEntry.HostName is NULL. + DnsCacheEntry.IpAddress is NULL. + DnsCacheEntry.Timeout is zero. + @retval EFI_ACCESS_DENIED The DNS cache entry already exists and Override is + not TRUE. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS4_UPDATE_DNS_CACHE) ( + IN EFI_DNS4_PROTOCOL *This, + IN BOOLEAN DeleteFlag, + IN BOOLEAN Override, + IN EFI_DNS4_CACHE_ENTRY DnsCacheEntry + ); + +/** + Polls for incoming data packets and processes outgoing data packets. + + The Poll() function can be used by network drivers and applications to increase the + rate that data packets are moved between the communications device and the transmit + and receive queues. + In some systems, the periodic timer event in the managed network driver may not poll + the underlying communications device fast enough to transmit and/or receive all data + packets without missing incoming packets or dropping outgoing packets. Drivers and + applications that are experiencing packet loss should try calling the Poll() + function more often. + + @param[in] This Pointer to EFI_DNS4_PROTOCOL instance. + + @retval EFI_SUCCESS Incoming or outgoing data was processed. + @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive + queue. Consider increasing the polling rate. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS4_POLL) ( + IN EFI_DNS4_PROTOCOL *This + ); + +/** + Abort an asynchronous DNS operation, including translation between IP and Host, and + general look up behavior. + + The Cancel() function is used to abort a pending resolution request. After calling + this function, Token.Status will be set to EFI_ABORTED and then Token.Event will be + signaled. If the token is not in one of the queues, which usually means that the + asynchronous operation has completed, this function will not signal the token and + EFI_NOT_FOUND is returned. + + @param[in] This Pointer to EFI_DNS4_PROTOCOL instance. + @param[in] Token Pointer to a token that has been issued by + EFI_DNS4_PROTOCOL.HostNameToIp (), + EFI_DNS4_PROTOCOL.IpToHostName() or + EFI_DNS4_PROTOCOL.GeneralLookup(). + If NULL, all pending tokens are aborted. + + @retval EFI_SUCCESS Incoming or outgoing data was processed. + @retval EFI_NOT_STARTED This EFI DNS4 Protocol instance has not been started. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NOT_FOUND When Token is not NULL, and the asynchronous DNS + operation was not found in the transmit queue. It + was either completed or was not issued by + HostNameToIp(), IpToHostName() or GeneralLookup(). +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS4_CANCEL) ( + IN EFI_DNS4_PROTOCOL *This, + IN EFI_DNS4_COMPLETION_TOKEN *Token + ); + +/// +/// The EFI_DNS4_Protocol provides the function to get the host name and address +/// mapping, also provides pass through interface to retrieve arbitrary information +/// from DNS. +/// +struct _EFI_DNS4_PROTOCOL { + EFI_DNS4_GET_MODE_DATA GetModeData; + EFI_DNS4_CONFIGURE Configure; + EFI_DNS4_HOST_NAME_TO_IP HostNameToIp; + EFI_DNS4_IP_TO_HOST_NAME IpToHostName; + EFI_DNS4_GENERAL_LOOKUP GeneralLookUp; + EFI_DNS4_UPDATE_DNS_CACHE UpdateDnsCache; + EFI_DNS4_POLL Poll; + EFI_DNS4_CANCEL Cancel; +}; + +extern EFI_GUID gEfiDns4ServiceBindingProtocolGuid; +extern EFI_GUID gEfiDns4ProtocolGuid; + +#endif diff --git a/MdePkg/Include/Protocol/Dns6.h b/MdePkg/Include/Protocol/Dns6.h new file mode 100644 index 0000000000..03cdf6a514 --- /dev/null +++ b/MdePkg/Include/Protocol/Dns6.h @@ -0,0 +1,539 @@ +/** @file + This file defines the EFI DNSv6 (Domain Name Service version 6) Protocol. It is split + into the following two main sections: + DNSv6 Service Binding Protocol (DNSv6SB) + DNSv6 Protocol (DNSv6) + + Copyright (c) 2015, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Revision Reference: + This Protocol is introduced in UEFI Specification 2.5 + +**/ + +#ifndef __EFI_DNS6_PROTOCOL_H__ +#define __EFI_DNS6_PROTOCOL_H__ + +#define EFI_DNS6_SERVICE_BINDING_PROTOCOL_GUID \ + { \ + 0x7f1647c8, 0xb76e, 0x44b2, {0xa5, 0x65, 0xf7, 0xf, 0xf1, 0x9c, 0xd1, 0x9e } \ + } + +#define EFI_DNS6_PROTOCOL_GUID \ + { \ + 0xca37bc1f, 0xa327, 0x4ae9, {0x82, 0x8a, 0x8c, 0x40, 0xd8, 0x50, 0x6a, 0x17 } \ + } + +typedef struct _EFI_DNS6_PROTOCOL EFI_DNS6_PROTOCOL; + +/// +/// EFI_DNS6_CONFIG_DATA +/// +typedef struct { + /// + /// If TRUE, enable DNS cache function for this DNS instance. If FALSE, all DNS query + /// will not lookup local DNS cache. + /// + BOOLEAN EnableDnsCache; + /// + /// Use the protocol number defined in + /// http://www.iana.org/assignments/protocol-numbers. Beside TCP/UDP, Other protocol + /// is invalid value. An implementation can choose to support UDP, or both TCP and UDP. + /// + UINT8 Protocol; + /// + /// The local IP address to use. Set to zero to let the underlying IPv6 + /// driver choose a source address. If not zero it must be one of the + /// configured IP addresses in the underlying IPv6 driver. + /// + EFI_IPv6_ADDRESS StationIp; + /// + /// Local port number. Set to zero to use the automatically assigned port number. + /// + UINT16 LocalPort; + /// + /// Count of the DNS servers. When used with GetModeData(), + /// this field is the count of originally configured servers when + /// Configure() was called for this instance. When used with + /// Configure() this is the count of caller-supplied servers. If the + /// DnsServerListCount is zero, the DNS server configuration + /// will be retrieved from DHCP server automatically. + /// + UINT32 DnsServerCount; + /// + /// Pointer to DNS server list containing DnsServerListCount + /// entries or NULL if DnsServerListCount is 0. For Configure(), + /// this will be NULL when there are no caller supplied server addresses + /// and the DNS instance will retrieve DNS server from DHCP Server. + /// The provided DNS server list is recommended to be filled up in the sequence + /// of preference. When used with GetModeData(), the buffer containing the list + /// will be allocated by the driver implementing this protocol and must be + /// freed by the caller. When used with Configure(), the buffer + /// containing the list will be allocated and released by the caller. + /// + EFI_IPv6_ADDRESS *DnsServerList; + /// + /// Retry number if no response received after RetryInterval. + /// + UINT32 RetryCount; + /// + /// Minimum interval of retry is 2 second. If the retry interval is less than 2 + /// seconds, then use the 2 seconds. + UINT32 RetryInterval; +} EFI_DNS6_CONFIG_DATA; + +/// +/// EFI_DNS6_CACHE_ENTRY +/// +typedef struct { + /// + /// Host name. This should be interpreted as Unicode characters. + /// + CHAR16 *HostName; + /// + /// IP address of this host. + /// + EFI_IPv6_ADDRESS *IpAddress; + /// + /// Time in second unit that this entry will remain in DNS cache. A value of zero means + /// that this entry is permanent. A nonzero value will override the existing one if + /// this entry to be added is dynamic entry. Implementations may set its default + /// timeout value for the dynamically created DNS cache entry after one DNS resolve + /// succeeds. + UINT32 Timeout; +} EFI_DNS6_CACHE_ENTRY; + +/// +/// EFI_DNS6_MODE_DATA +/// +typedef struct { + /// + /// The configuration data of this instance. + /// + EFI_DNS6_CONFIG_DATA DnsConfigData; + /// + /// Number of configured DNS6 servers. + /// + UINT32 DnsServerCount; + /// + /// Pointer to common list of addresses of all configured DNS server used by EFI_DNS6_PROTOCOL + /// instances. List will include DNS servers configured by this or any other EFI_DNS6_PROTOCOL + /// instance. The storage for this list is allocated by the driver publishing this protocol, + /// and must be freed by the caller. + /// + EFI_IPv6_ADDRESS *DnsServerList; + /// + /// Number of DNS Cache entries. The DNS Cache is shared among all DNS instances. + /// + UINT32 DnsCacheCount; + /// + /// Pointer to a buffer containing DnsCacheCount DNS Cache + /// entry structures. The storage for thislist is allocated by the driver + /// publishing this protocol and must be freed by caller. + /// + EFI_DNS6_CACHE_ENTRY *DnsCacheList; +} EFI_DNS6_MODE_DATA; + +/// +/// DNS6_HOST_TO_ADDR_DATA +/// +typedef struct { + /// + /// Number of the returned IP address. + /// + UINT32 IpCount; + /// + /// Pointer to the all the returned IP address. + /// + EFI_IPv6_ADDRESS *IpList; +} DNS6_HOST_TO_ADDR_DATA; + +/// +/// DNS6_ADDR_TO_HOST_DATA +/// +typedef struct { + /// + /// Pointer to the primary name for this host address. It's the caller's + /// responsibility to free the response memory. + /// + CHAR16 *HostName; +} DNS6_ADDR_TO_HOST_DATA; + +/// +/// DNS6_RESOURCE_RECORD +/// +typedef struct { + /// + /// The Owner name. + /// + CHAR8 *QName; + /// + /// The Type Code of this RR. + /// + UINT16 QType; + /// + /// The CLASS code of this RR. + /// + UINT16 QClass; + /// + /// 32 bit integer which specify the time interval that the resource record may be + /// cached before the source of the information should again be consulted. Zero means + /// this RR cannot be cached. + /// + UINT32 TTL; + /// + /// 16 big integer which specify the length of RData. + /// + UINT16 DataLength; + /// + /// A string of octets that describe the resource, the format of this information + /// varies according to QType and QClass difference. + /// + CHAR8 *RData; +} DNS6_RESOURCE_RECORD; + +/// +/// DNS6_GENERAL_LOOKUP_DATA +/// +typedef struct { + /// + /// Number of returned matching RRs. + /// + UINTN RRCount; + /// + /// Pointer to the all the returned matching RRs. It's caller responsibility to free + /// the allocated memory to hold the returned RRs. + /// + DNS6_RESOURCE_RECORD *RRList; +} DNS6_GENERAL_LOOKUP_DATA; + +/// +/// EFI_DNS6_COMPLETION_TOKEN +/// +typedef struct { + /// + /// This Event will be signaled after the Status field is updated by the EFI DNSv6 + /// protocol driver. The type of Event must be EFI_NOTIFY_SIGNAL. + /// + EFI_EVENT Event; + /// + /// Will be set to one of the following values: + /// EFI_SUCCESS: The host name to address translation completed successfully. + /// EFI_NOT_FOUND: No matching Resource Record (RR) is found. + /// EFI_TIMEOUT: No DNS server reachable, or RetryCount was exhausted without + /// response from all specified DNS servers. + /// EFI_DEVICE_ERROR: An unexpected system or network error occurred. + /// EFI_NO_MEDIA: There was a media error. + /// + EFI_STATUS Status; + /// + /// The parameter configured through DNSv6.Configure() interface. Retry number if no + /// response received after RetryInterval. + /// + UINT32 RetryCount; + /// + /// The parameter configured through DNSv6.Configure() interface. Minimum interval of + /// retry is 2 seconds. If the retry interval is less than 2 seconds, then use the 2 + /// seconds. + /// + UINT32 RetryInterval; + /// + /// DNSv6 completion token data + /// + union { + /// + /// When the Token is used for host name to address translation, H2AData is a pointer + /// to the DNS6_HOST_TO_ADDR_DATA. + /// + DNS6_HOST_TO_ADDR_DATA *H2AData; + /// + /// When the Token is used for host address to host name translation, A2HData is a + /// pointer to the DNS6_ADDR_TO_HOST_DATA. + /// + DNS6_ADDR_TO_HOST_DATA *A2HData; + /// + /// When the Token is used for a general lookup function, GLookupDATA is a pointer to + /// the DNS6_GENERAL_LOOKUP_DATA. + /// + DNS6_GENERAL_LOOKUP_DATA *GLookupData; + } RspData; +} EFI_DNS6_COMPLETION_TOKEN; + +/** + Retrieve mode data of this DNS instance. + + This function is used to retrieve DNS mode data for this DNS instance. + + @param[in] This Pointer to EFI_DNS6_PROTOCOL instance. + @param[out] DnsModeData Pointer to the caller-allocated storage for the + EFI_DNS6_MODE_DATA data. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_NOT_STARTED When DnsConfigData is queried, no configuration data + is available because this instance has not been + configured. + @retval EFI_INVALID_PARAMETER This is NULL or DnsModeData is NULL. + @retval EFI_OUT_OF_RESOURCE Failed to allocate needed resources. +**/ +typedef +EFI_STATUS +(EFIAPI * EFI_DNS6_GET_MODE_DATA)( + IN EFI_DNS6_PROTOCOL *This, + OUT EFI_DNS6_MODE_DATA *DnsModeData + ); + +/** + Configure this DNS instance. + + The Configure() function is used to set and change the configuration data for this + EFI DNSv6 Protocol driver instance. Reset the DNS instance if DnsConfigData is NULL. + + @param[in] This Pointer to EFI_DNS6_PROTOCOL instance. + @param[in] DnsConfigData Pointer to the configuration data structure. All associated + storage to be allocated and released by caller. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMTER This is NULL. + The StationIp address provided in DnsConfigData is not a valid unicast. + DnsServerList is NULL while DnsServerList Count is not ZERO. + DnsServerList Count is ZERO while DnsServerList is not NULL. + @retval EFI_OUT_OF_RESOURCES The DNS instance data or required space could not be allocated. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The + EFI DNSv6 Protocol instance is not configured. + @retval EFI_UNSUPPORTED The designated protocol is not supported. + @retval EFI_ALREADY_STARTED Second call to Configure() with DnsConfigData. To + reconfigure the instance the caller must call Configure() with + NULL first to return driver to unconfigured state. +**/ +typedef +EFI_STATUS +(EFIAPI * EFI_DNS6_CONFIGURE)( + IN EFI_DNS6_PROTOCOL *This, + IN EFI_DNS6_CONFIG_DATA *DnsConfigData + ); + +/** + Host name to host address translation. + + The HostNameToIp () function is used to translate the host name to host IP address. A + type A query is used to get the one or more IPv6 addresses for this host. + + @param[in] This Pointer to EFI_DNS6_PROTOCOL instance. + @param[in] Hostname Host name. + @param[in] Token Point to the completion token to translate host name + to host address. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token is NULL. + Token.Event is NULL. + HostName is NULL or buffer contained unsupported characters. + @retval EFI_NO_MAPPING There's no source address is available for use. + @retval EFI_ALREADY_STARTED This Token is being used in another DNS session. + @retval EFI_NOT_STARTED This instance has not been started. + @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS6_HOST_NAME_TO_IP) ( + IN EFI_DNS6_PROTOCOL *This, + IN CHAR16 *HostName, + IN EFI_DNS6_COMPLETION_TOKEN *Token + ); + +/** + Host address to host name translation. + + The IpToHostName () function is used to translate the host address to host name. A + type PTR query is used to get the primary name of the host. Implementation can choose + to support this function or not. + + @param[in] This Pointer to EFI_DNS6_PROTOCOL instance. + @param[in] IpAddress Ip Address. + @param[in] Token Point to the completion token to translate host + address to host name. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_UNSUPPORTED This function is not supported. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token is NULL. + Token.Event is NULL. + IpAddress is not valid IP address. + @retval EFI_NO_MAPPING There's no source address is available for use. + @retval EFI_NOT_STARTED This instance has not been started. + @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS6_IP_TO_HOST_NAME) ( + IN EFI_DNS6_PROTOCOL *This, + IN EFI_IPv6_ADDRESS IpAddress, + IN EFI_DNS6_COMPLETION_TOKEN *Token + ); + +/** + This function provides capability to retrieve arbitrary information from the DNS + server. + + This GeneralLookup() function retrieves arbitrary information from the DNS. The caller + supplies a QNAME, QTYPE, and QCLASS, and all of the matching RRs are returned. All + RR content (e.g., TTL) was returned. The caller need parse the returned RR to get + required information. The function is optional. Implementation can choose to support + it or not. + + @param[in] This Pointer to EFI_DNS6_PROTOCOL instance. + @param[in] QName Pointer to Query Name. + @param[in] QType Query Type. + @param[in] QClass Query Name. + @param[in] Token Point to the completion token to retrieve arbitrary + information. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_UNSUPPORTED This function is not supported. Or the requested + QType is not supported + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token is NULL. + Token.Event is NULL. + QName is NULL. + @retval EFI_NO_MAPPING There's no source address is available for use. + @retval EFI_NOT_STARTED This instance has not been started. + @retval EFI_OUT_OF_RESOURCES Failed to allocate needed resources. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS6_GENERAL_LOOKUP) ( + IN EFI_DNS6_PROTOCOL *This, + IN CHAR8 *QName, + IN UINT16 QType, + IN UINT16 QClass, + IN EFI_DNS6_COMPLETION_TOKEN *Token + ); + +/** + This function is to update the DNS Cache. + + The UpdateDnsCache() function is used to add/delete/modify DNS cache entry. DNS cache + can be normally dynamically updated after the DNS resolve succeeds. This function + provided capability to manually add/delete/modify the DNS cache. + + @param[in] This Pointer to EFI_DNS6_PROTOCOL instance. + @param[in] DeleteFlag If FALSE, this function is to add one entry to the + DNS Cahce. If TRUE, this function will delete + matching DNS Cache entry. + @param[in] Override If TRUE, the maching DNS cache entry will be + overwritten with the supplied parameter. If FALSE, + EFI_ACCESS_DENIED will be returned if the entry to + be added is already existed. + @param[in] DnsCacheEntry Pointer to DNS Cache entry. + + @retval EFI_SUCCESS The operation completed successfully. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + DnsCacheEntry.HostName is NULL. + DnsCacheEntry.IpAddress is NULL. + DnsCacheEntry.Timeout is zero. + @retval EFI_ACCESS_DENIED The DNS cache entry already exists and Override is + not TRUE. + @retval EFI_OUT_OF_RESOURCE Failed to allocate needed resources. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS6_UPDATE_DNS_CACHE) ( + IN EFI_DNS6_PROTOCOL *This, + IN BOOLEAN DeleteFlag, + IN BOOLEAN Override, + IN EFI_DNS6_CACHE_ENTRY DnsCacheEntry + ); + +/** + Polls for incoming data packets and processes outgoing data packets. + + The Poll() function can be used by network drivers and applications to increase the + rate that data packets are moved between the communications device and the transmit + and receive queues. + + In some systems, the periodic timer event in the managed network driver may not poll + the underlying communications device fast enough to transmit and/or receive all data + packets without missing incoming packets or dropping outgoing packets. Drivers and + applications that are experiencing packet loss should try calling the Poll() + function more often. + + @param[in] This Pointer to EFI_DNS6_PROTOCOL instance. + + @retval EFI_SUCCESS Incoming or outgoing data was processed. + @retval EFI_NOT_STARTED This EFI DNS Protocol instance has not been started. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NO_MAPPING There is no source address is available for use. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive + queue. Consider increasing the polling rate. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS6_POLL) ( + IN EFI_DNS6_PROTOCOL *This + ); + +/** + Abort an asynchronous DNS operation, including translation between IP and Host, and + general look up behavior. + + The Cancel() function is used to abort a pending resolution request. After calling + this function, Token.Status will be set to EFI_ABORTED and then Token.Event will be + signaled. If the token is not in one of the queues, which usually means that the + asynchronous operation has completed, this function will not signal the token and + EFI_NOT_FOUND is returned. + + @param[in] This Pointer to EFI_DNS6_PROTOCOL instance. + @param[in] Token Pointer to a token that has been issued by + EFI_DNS6_PROTOCOL.HostNameToIp (), + EFI_DNS6_PROTOCOL.IpToHostName() or + EFI_DNS6_PROTOCOL.GeneralLookup(). + If NULL, all pending tokens are aborted. + + @retval EFI_SUCCESS Incoming or outgoing data was processed. + @retval EFI_NOT_STARTED This EFI DNS6 Protocol instance has not been started. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NO_MAPPING There's no source address is available for use. + @retval EFI_NOT_FOUND When Token is not NULL, and the asynchronous DNS + operation was not found in the transmit queue. It + was either completed or was not issued by + HostNameToIp(), IpToHostName() or GeneralLookup(). +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_DNS6_CANCEL) ( + IN EFI_DNS6_PROTOCOL *This, + IN EFI_DNS6_COMPLETION_TOKEN *Token + ); + +/// +/// The EFI_DNS6_PROTOCOL provides the function to get the host name and address +/// mapping, also provide pass through interface to retrieve arbitrary information from +/// DNSv6. +/// +struct _EFI_DNS6_PROTOCOL { + EFI_DNS6_GET_MODE_DATA GetModeData; + EFI_DNS6_CONFIGURE Configure; + EFI_DNS6_HOST_NAME_TO_IP HostNameToIp; + EFI_DNS6_IP_TO_HOST_NAME IpToHostName; + EFI_DNS6_GENERAL_LOOKUP GeneralLookUp; + EFI_DNS6_UPDATE_DNS_CACHE UpdateDnsCache; + EFI_DNS6_POLL Poll; + EFI_DNS6_CANCEL Cancel; +}; + +extern EFI_GUID gEfiDns6ServiceBindingProtocolGuid; +extern EFI_GUID gEfiDns6ProtocolGuid; + +#endif diff --git a/MdePkg/Include/Protocol/Http.h b/MdePkg/Include/Protocol/Http.h new file mode 100644 index 0000000000..b1f8c51341 --- /dev/null +++ b/MdePkg/Include/Protocol/Http.h @@ -0,0 +1,505 @@ +/** @file + This file defines the EFI HTTP Protocol interface. It is split into + the following two main sections: + HTTP Service Binding Protocol (HTTPSB) + HTTP Protocol (HTTP) + + Copyright (c) 2015, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Revision Reference: + This Protocol is introduced in UEFI Specification 2.5 + +**/ + +#ifndef __EFI_HTTP_PROTOCOL_H__ +#define __EFI_HTTP_PROTOCOL_H__ + +#define EFI_HTTP_SERVICE_BINDING_PROTOCOL_GUID \ + { \ + 0xbdc8e6af, 0xd9bc, 0x4379, {0xa7, 0x2a, 0xe0, 0xc4, 0xe7, 0x5d, 0xae, 0x1c } \ + } + +#define EFI_HTTP_PROTOCOL_GUID \ + { \ + 0x7a59b29b, 0x910b, 0x4171, {0x82, 0x42, 0xa8, 0x5a, 0x0d, 0xf2, 0x5b, 0x5b } \ + } + +typedef struct _EFI_HTTP_PROTOCOL EFI_HTTP_PROTOCOL; + +/// +/// EFI_HTTP_VERSION +/// +typedef enum { + HttpVersion10, + HttpVersion11, + HttpVersionUnsupported +} EFI_HTTP_VERSION; + +/// +/// EFI_HTTP_METHOD +/// +typedef enum { + HttpMethodGet, + HttpMethodPost, + HttpMethodPatch, + HttpMethodOptions, + HttpMethodConnect, + HttpMethodHead, + HttpMethodPut, + HttpMethodDelete, + HttpMethodTrace +} EFI_HTTP_METHOD; + +/// +/// EFI_HTTP_STATUS_CODE +/// +typedef enum { + HTTP_STATUS_UNSUPPORTED_STATUS = 0, + HTTP_STATUS_100_CONTINUE, + HTTP_STATUS_101_SWITCHING_PROTOCOLS, + HTTP_STATUS_200_OK, + HTTP_STATUS_201_CREATED, + HTTP_STATUS_202_ACCEPTED, + HTTP_STATUS_203_NON_AUTHORITATIVE_INFORMATION, + HTTP_STATUS_204_NO_CONTENT, + HTTP_STATUS_205_RESET_CONTENT, + HTTP_STATUS_206_PARTIAL_CONTENT, + HTTP_STATUS_300_MULTIPLE_CHIOCES, + HTTP_STATUS_301_MOVED_PERMANENTLY, + HTTP_STATUS_302_FOUND, + HTTP_STATUS_303_SEE_OTHER, + HTTP_STATUS_304_NOT_MODIFIED, + HTTP_STATUS_305_USE_PROXY, + HTTP_STATUS_307_TEMPORARY_REDIRECT, + HTTP_STATUS_400_BAD_REQUEST, + HTTP_STATUS_401_UNAUTHORIZED, + HTTP_STATUS_402_PAYMENT_REQUIRED, + HTTP_STATUS_403_FORBIDDEN, + HTTP_STATUS_404_NOT_FOUND, + HTTP_STATUS_405_METHOD_NOT_ALLOWED, + HTTP_STATUS_406_NOT_ACCEPTABLE, + HTTP_STATUS_407_PROXY_AUTHENTICATION_REQUIRED, + HTTP_STATUS_408_REQUEST_TIME_OUT, + HTTP_STATUS_409_CONFLICT, + HTTP_STATUS_410_GONE, + HTTP_STATUS_411_LENGTH_REQUIRED, + HTTP_STATUS_412_PRECONDITION_FAILED, + HTTP_STATUS_413_REQUEST_ENTITY_TOO_LARGE, + HTTP_STATUS_414_REQUEST_URI_TOO_LARGE, + HTTP_STATUS_415_UNSUPPORETD_MEDIA_TYPE, + HTTP_STATUS_416_REQUESTED_RANGE_NOT_SATISFIED, + HTTP_STATUS_417_EXPECTATION_FAILED, + HTTP_STATUS_500_INTERNAL_SERVER_ERROR, + HTTP_STATUS_501_NOT_IMIPLEMENTED, + HTTP_STATUS_502_BAD_GATEWAY, + HTTP_STATUS_503_SERVICE_UNAVAILABLE, + HTTP_STATUS_504_GATEWAY_TIME_OUT, + HTTP_STATUS_505_HTTP_VERSION_NOT_SUPPORTED +} EFI_HTTP_STATUS_CODE; + +/// +/// EFI_HTTPv4_ACCESS_POINT +/// +typedef struct { + /// + /// Set to TRUE to instruct the EFI HTTP instance to use the default address + /// information in every TCP connection made by this instance. In addition, when set + /// to TRUE, LocalAddress, LocalSubnet, and LocalPort are ignored. + /// + BOOLEAN UseDefaultAddress; + /// + /// If UseDefaultAddress is set to FALSE, this defines the local IP address to be + /// used in every TCP connection opened by this instance. + /// + EFI_IPv4_ADDRESS LocalAddress; + /// + /// If UseDefaultAddress is set to FALSE, this defines the local subnet to be used + /// in every TCP connection opened by this instance. + /// + EFI_IPv4_ADDRESS LocalSubnet; + /// + /// If UseDefaultAddress is set to FALSE, this defines the local port to be used in + /// every TCP connection opened by this instance. + /// + UINT16 LocalPort; +} EFI_HTTPv4_ACCESS_POINT; + +/// +/// EFI_HTTPv6_ACCESS_POINT +/// +typedef struct { + /// + /// Local IP address to be used in every TCP connection opened by this instance. + /// + EFI_IPv6_ADDRESS LocalAddress; + /// + /// Local port to be used in every TCP connection opened by this instance. + /// + UINT16 LocalPort; +} EFI_HTTPv6_ACCESS_POINT; + +/// +/// EFI_HTTP_CONFIG_DATA_ACCESS_POINT +/// + + +typedef struct { + /// + /// HTTP version that this instance will support. + /// + EFI_HTTP_VERSION HttpVersion; + /// + /// Time out (in milliseconds) when blocking for requests. + /// + UINT32 TimeOutMillisec; + /// + /// Defines behavior of EFI DNS and TCP protocols consumed by this instance. If + /// FALSE, this instance will use EFI_DNS4_PROTOCOL and EFI_TCP4_PROTOCOL. If TRUE, + /// this instance will use EFI_DNS6_PROTOCOL and EFI_TCP6_PROTOCOL. + /// + BOOLEAN LocalAddressIsIPv6; + + union { + /// + /// When LocalAddressIsIPv6 is FALSE, this points to the local address, subnet, and + /// port used by the underlying TCP protocol. + /// + EFI_HTTPv4_ACCESS_POINT *IPv4Node; + /// + /// When LocalAddressIsIPv6 is TRUE, this points to the local IPv6 address and port + /// used by the underlying TCP protocol. + /// + EFI_HTTPv6_ACCESS_POINT *IPv6Node; + } AccessPoint; +} EFI_HTTP_CONFIG_DATA; + +/// +/// EFI_HTTP_REQUEST_DATA +/// +typedef struct { + /// + /// The HTTP method (e.g. GET, POST) for this HTTP Request. + /// + EFI_HTTP_METHOD Method; + /// + /// The URI of a remote host. From the information in this field, the HTTP instance + /// will be able to determine whether to use HTTP or HTTPS and will also be able to + /// determine the port number to use. If no port number is specified, port 80 (HTTP) + /// is assumed. See RFC 3986 for more details on URI syntax. + /// + CHAR16 *Url; +} EFI_HTTP_REQUEST_DATA; + +/// +/// EFI_HTTP_RESPONSE_DATA +/// +typedef struct { + /// + /// Response status code returned by the remote host. + /// + EFI_HTTP_STATUS_CODE StatusCode; +} EFI_HTTP_RESPONSE_DATA; + +/// +/// EFI_HTTP_HEADER +/// +typedef struct { + /// + /// Null terminated string which describes a field name. See RFC 2616 Section 14 for + /// detailed information about field names. + /// + CHAR8 *FieldName; + /// + /// Null terminated string which describes the corresponding field value. See RFC 2616 + /// Section 14 for detailed information about field values. + /// + CHAR8 *FieldValue; +} EFI_HTTP_HEADER; + +/// +/// EFI_HTTP_MESSAGE +/// +typedef struct { + /// + /// HTTP message data. + /// + union { + /// + /// When the token is used to send a HTTP request, Request is a pointer to storage that + /// contains such data as URL and HTTP method. + /// + EFI_HTTP_REQUEST_DATA *Request; + /// + /// When used to await a response, Response points to storage containing HTTP response + /// status code. + /// + EFI_HTTP_RESPONSE_DATA *Response; + } Data; + /// + /// Number of HTTP header structures in Headers list. On request, this count is + /// provided by the caller. On response, this count is provided by the HTTP driver. + /// + UINTN HeaderCount; + /// + /// Array containing list of HTTP headers. On request, this array is populated by the + /// caller. On response, this array is allocated and populated by the HTTP driver. It + /// is the responsibility of the caller to free this memory on both request and + /// response. + /// + EFI_HTTP_HEADER *Headers; + /// + /// Length in bytes of the HTTP body. This can be zero depending on the HttpMethod type. + /// + UINTN BodyLength; + /// + /// Body associated with the HTTP request or response. This can be NULL depending on + /// the HttpMethod type. + /// + VOID *Body; +} EFI_HTTP_MESSAGE; + + +/// +/// EFI_HTTP_TOKEN +/// +typedef struct { + /// + /// This Event will be signaled after the Status field is updated by the EFI HTTP + /// Protocol driver. The type of Event must be EFI_NOTIFY_SIGNAL. The Task Priority + /// Level (TPL) of Event must be lower than or equal to TPL_CALLBACK. + /// + EFI_EVENT Event; + /// + /// Status will be set to one of the following value if the HTTP request is + /// successfully sent or if an unexpected error occurs: + /// EFI_SUCCESS: The HTTP request was successfully sent to the remote host. + /// EFI_ABORTED: The HTTP request was cancelled by the caller and removed from + /// the transmit queue. + /// EFI_TIMEOUT: The HTTP request timed out before reaching the remote host. + /// EFI_DEVICE_ERROR: An unexpected system or network error occurred. + /// + EFI_STATUS Status; + /// + /// Pointer to storage containing HTTP message data. + /// + EFI_HTTP_MESSAGE *Message; +} EFI_HTTP_TOKEN; + +/** + Returns the operational parameters for the current HTTP child instance. + + The GetModeData() function is used to read the current mode data (operational + parameters) for this HTTP protocol instance. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[out] HttpConfigData Point to buffer for operational parameters of this + HTTP instance. + + @retval EFI_SUCCESS Operation succeeded. + @retval EFI_INVALID_PARAMETER This is NULL. +**/ +typedef +EFI_STATUS +(EFIAPI * EFI_HTTP_GET_MODE_DATA)( + IN EFI_HTTP_PROTOCOL *This, + OUT EFI_HTTP_CONFIG_DATA *HttpConfigData + ); + +/** + Initialize or brutally reset the operational parameters for this EFI HTTP instance. + + The Configure() function does the following: + When HttpConfigData is not NULL Initialize this EFI HTTP instance by configuring + timeout, local address, port, etc. + When HttpConfigData is NULL, reset this EFI HTTP instance by closing all active + connections with remote hosts, canceling all asynchronous tokens, and flush request + and response buffers without informing the appropriate hosts. + + Except for GetModeData() and Configure(), No other EFI HTTP function can be executed + by this instance until the Configure() function is executed and returns successfully. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[in] HttpConfigData Pointer to the configure data to configure the instance. + + @retval EFI_SUCCESS Operation succeeded. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + HttpConfigData->LocalAddressIsIPv6 is FALSE and + HttpConfigData->IPv4Node is NULL. + HttpConfigData->LocalAddressIsIPv6 is TRUE and + HttpConfigData->IPv6Node is NULL. + @retval EFI_ALREADY_STARTED Reinitialize this HTTP instance without calling + Configure() with NULL to reset it. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + @retval EFI_OUT_OF_RESOURCES Could not allocate enough system resources when + executing Configure(). + @retval EFI_UNSUPPORTED One or more options in ConfigData are not supported + in the implementation. +**/ +typedef +EFI_STATUS +(EFIAPI * EFI_HTTP_CONFIGURE)( + IN EFI_HTTP_PROTOCOL *This, + IN EFI_HTTP_CONFIG_DATA *HttpConfigData + ); + +/** + The Request() function queues an HTTP request to this HTTP instance, + similar to Transmit() function in the EFI TCP driver. When the HTTP request is sent + successfully, or if there is an error, Status in token will be updated and Event will + be signaled. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[in] Token Pointer to storage containing HTTP request token. + + @retval EFI_SUCCESS Outgoing data was processed. + @retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been started. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. + @retval EFI_TIMEOUT Data was dropped out of the transmit or receive queue. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token->Message is NULL. + Token->Message->Body is not NULL, + Token->Message->BodyLength is non-zero, and + Token->Message->Data is NULL, but a previous call to + Request()has not been completed successfully. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HTTP_REQUEST) ( + IN EFI_HTTP_PROTOCOL *This, + IN EFI_HTTP_TOKEN *Token + ); + +/** + Abort an asynchronous HTTP request or response token. + + The Cancel() function aborts a pending HTTP request or response transaction. If + Token is not NULL and the token is in transmit or receive queues when it is being + cancelled, its Token->Status will be set to EFI_ABORTED and then Token->Event will + be signaled. If the token is not in one of the queues, which usually means that the + asynchronous operation has completed, EFI_NOT_FOUND is returned. If Token is NULL, + all asynchronous tokens issued by Request() or Response() will be aborted. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[in] Token Point to storage containing HTTP request or response + token. + + @retval EFI_SUCCESS Request and Response queues are successfully flushed. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NOT_STARTED This instance hasn't been configured. + @retval EFI_NO_MAPPING When using the default address, configuration (DHCP, + BOOTP, RARP, etc.) hasn't finished yet. + @retval EFI_NOT_FOUND The asynchronous request or response token is not + found. + @retval EFI_UNSUPPORTED The implementation does not support this function. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HTTP_CANCEL)( + IN EFI_HTTP_PROTOCOL *This, + IN EFI_HTTP_TOKEN *Token + ); + +/** + The Response() function queues an HTTP response to this HTTP instance, similar to + Receive() function in the EFI TCP driver. When the HTTP request is sent successfully, + or if there is an error, Status in token will be updated and Event will be signaled. + + The HTTP driver will queue a receive token to the underlying TCP instance. When data + is received in the underlying TCP instance, the data will be parsed and Token will + be populated with the response data. If the data received from the remote host + contains an incomplete or invalid HTTP header, the HTTP driver will continue waiting + (asynchronously) for more data to be sent from the remote host before signaling + Event in Token. + + It is the responsibility of the caller to allocate a buffer for Body and specify the + size in BodyLength. If the remote host provides a response that contains a content + body, up to BodyLength bytes will be copied from the receive buffer into Body and + BodyLength will be updated with the amount of bytes received and copied to Body. This + allows the client to download a large file in chunks instead of into one contiguous + block of memory. Similar to HTTP request, if Body is not NULL and BodyLength is + non-zero and all other fields are NULL or 0, the HTTP driver will queue a receive + token to underlying TCP instance. If data arrives in the receive buffer, up to + BodyLength bytes of data will be copied to Body. The HTTP driver will then update + BodyLength with the amount of bytes received and copied to Body. + + If the HTTP driver does not have an open underlying TCP connection with the host + specified in the response URL, Request() will return EFI_ACCESS_DENIED. This is + consistent with RFC 2616 recommendation that HTTP clients should attempt to maintain + an open TCP connection between client and host. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + @param[in] Token Pointer to storage containing HTTP response token. + + @retval EFI_SUCCESS Allocation succeeded. + @retval EFI_NOT_STARTED This EFI HTTP Protocol instance has not been + initialized. + @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: + This is NULL. + Token->Message->Headers is NULL. + Token->Message is NULL. + Token->Message->Body is not NULL, + Token->Message->BodyLength is non-zero, and + Token->Message->Data is NULL, but a previous call to + Response() has not been completed successfully. + @retval EFI_ACCESS_DENIED An open TCP connection is not present with the host + specified by response URL. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HTTP_RESPONSE) ( + IN EFI_HTTP_PROTOCOL *This, + IN EFI_HTTP_TOKEN *Token + ); + +/** + The Poll() function can be used by network drivers and applications to increase the + rate that data packets are moved between the communication devices and the transmit + and receive queues. + + In some systems, the periodic timer event in the managed network driver may not poll + the underlying communications device fast enough to transmit and/or receive all data + packets without missing incoming packets or dropping outgoing packets. Drivers and + applications that are experiencing packet loss should try calling the Poll() function + more often. + + @param[in] This Pointer to EFI_HTTP_PROTOCOL instance. + + @retval EFI_SUCCESS Incoming or outgoing data was processed.. + @retval EFI_DEVICE_ERROR An unexpected system or network error occurred + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NOT_READY No incoming or outgoing data is processed. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_HTTP_POLL) ( + IN EFI_HTTP_PROTOCOL *This + ); + +/// +/// The EFI HTTP protocol is designed to be used by EFI drivers and applications to +/// create and transmit HTTP Requests, as well as handle HTTP responses that are +/// returned by a remote host. This EFI protocol uses and relies on an underlying EFI +/// TCP protocol. +/// +struct _EFI_HTTP_PROTOCOL { + EFI_HTTP_GET_MODE_DATA GetModeData; + EFI_HTTP_CONFIGURE Configure; + EFI_HTTP_REQUEST Request; + EFI_HTTP_CANCEL Cancel; + EFI_HTTP_RESPONSE Response; + EFI_HTTP_POLL Poll; +}; + +extern EFI_GUID gEfiHttpServiceBindingProtocolGuid; +extern EFI_GUID gEfiHttpProtocolGuid; + +#endif diff --git a/MdePkg/Include/Protocol/Ip4Config2.h b/MdePkg/Include/Protocol/Ip4Config2.h new file mode 100644 index 0000000000..383da8a4e0 --- /dev/null +++ b/MdePkg/Include/Protocol/Ip4Config2.h @@ -0,0 +1,313 @@ +/** @file + This file provides a definition of the EFI IPv4 Configuration II + Protocol. + +Copyright (c) 2015, Intel Corporation. All rights reserved.
+This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +@par Revision Reference: +This Protocol is introduced in UEFI Specification 2.5 + +**/ +#ifndef __EFI_IP4CONFIG2_PROTOCOL_H__ +#define __EFI_IP4CONFIG2_PROTOCOL_H__ + +#include + +#define EFI_IP4_CONFIG2_PROTOCOL_GUID \ + { \ + 0x5b446ed1, 0xe30b, 0x4faa, {0x87, 0x1a, 0x36, 0x54, 0xec, 0xa3, 0x60, 0x80 } \ + } + +typedef struct _EFI_IP4_CONFIG2_PROTOCOL EFI_IP4_CONFIG2_PROTOCOL; + + +/// +/// EFI_IP4_CONFIG2_DATA_TYPE +/// +typedef enum { + /// + /// The interface information of the communication device this EFI + /// IPv4 Configuration II Protocol instance manages. This type of + /// data is read only. The corresponding Data is of type + /// EFI_IP4_CONFIG2_INTERFACE_INFO. + /// + Ip4Config2DataTypeInterfaceInfo, + /// + /// The general configuration policy for the EFI IPv4 network stack + /// running on the communication device this EFI IPv4 + /// Configuration II Protocol instance manages. The policy will + /// affect other configuration settings. The corresponding Data is of + /// type EFI_IP4_CONFIG2_POLICY. + /// + Ip4Config2DataTypePolicy, + /// + /// The station addresses set manually for the EFI IPv4 network + /// stack. It is only configurable when the policy is + /// Ip4Config2PolicyStatic. The corresponding Data is of + /// type EFI_IP4_CONFIG2_MANUAL_ADDRESS. + /// + Ip4Config2DataTypeManualAddress, + /// + /// The gateway addresses set manually for the EFI IPv4 network + /// stack running on the communication device this EFI IPv4 + /// Configuration II Protocol manages. It is not configurable when + /// the policy is Ip4Config2PolicyDhcp. The gateway + /// addresses must be unicast IPv4 addresses. The corresponding + /// Data is a pointer to an array of EFI_IPv4_ADDRESS instances. + /// + Ip4Config2DataTypeGateway, + /// + /// The DNS server list for the EFI IPv4 network stack running on + /// the communication device this EFI IPv4 Configuration II + /// Protocol manages. It is not configurable when the policy is + /// Ip4Config2PolicyDhcp. The DNS server addresses must be + /// unicast IPv4 addresses. The corresponding Data is a pointer to + /// an array of EFI_IPv4_ADDRESS instances. + /// + Ip4Config2DataTypeDnsServer, + Ip4Config2DataTypeMaximum +} EFI_IP4_CONFIG2_DATA_TYPE; + +/// +/// EFI_IP4_CONFIG2_INTERFACE_INFO +/// +typedef struct { + /// + /// The name of the interface. It is a NULL-terminated Unicode string. + /// + CHAR16 Name[32]; + /// + /// The interface type of the network interface. See RFC 1700, + /// section "Number Hardware Type". + /// + UINT8 IfType; + /// + /// The size, in bytes, of the network interface's hardware address. + /// + UINT32 HwAddressSize; + /// + /// The hardware address for the network interface. + /// + EFI_MAC_ADDRESS HwAddress; + /// + /// The station IPv4 address of this EFI IPv4 network stack. + /// + EFI_IPv4_ADDRESS StationAddress; + /// + /// The subnet address mask that is associated with the station address. + /// + EFI_IPv4_ADDRESS SubnetMask; + /// + /// Size of the following RouteTable, in bytes. May be zero. + /// + UINT32 RouteTableSize; + /// + /// The route table of the IPv4 network stack runs on this interface. + /// Set to NULL if RouteTableSize is zero. Type EFI_IP4_ROUTE_TABLE is defined in + /// EFI_IP4_PROTOCOL.GetModeData(). + /// + EFI_IP4_ROUTE_TABLE *RouteTable OPTIONAL; +} EFI_IP4_CONFIG2_INTERFACE_INFO; + +/// +/// EFI_IP4_CONFIG2_POLICY +/// +typedef enum { + /// + /// Under this policy, the Ip4Config2DataTypeManualAddress, + /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration + /// data are required to be set manually. The EFI IPv4 Protocol will get all + /// required configuration such as IPv4 address, subnet mask and + /// gateway settings from the EFI IPv4 Configuration II protocol. + /// + Ip4Config2PolicyStatic, + /// + /// Under this policy, the Ip4Config2DataTypeManualAddress, + /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration data are + /// not allowed to set via SetData(). All of these configurations are retrieved from DHCP + /// server or other auto-configuration mechanism. + /// + Ip4Config2PolicyDhcp, + Ip4Config2PolicyMax +} EFI_IP4_CONFIG2_POLICY; + +/// +/// EFI_IP4_CONFIG2_MANUAL_ADDRESS +/// +typedef struct { + /// + /// The IPv4 unicast address. + /// + EFI_IPv4_ADDRESS Address; + /// + /// The subnet mask. + /// + EFI_IPv4_ADDRESS SubnetMask; +} EFI_IP4_CONFIG2_MANUAL_ADDRESS; + +/** + Set the configuration for the EFI IPv4 network stack running on the communication device this EFI + IPv4 Configuration II Protocol instance manages. + + This function is used to set the configuration data of type DataType for the EFI IPv4 network stack + running on the communication device this EFI IPv4 Configuration II Protocol instance manages. + The successfully configured data is valid after system reset or power-off. + The DataSize is used to calculate the count of structure instances in the Data for some + DataType that multiple structure instances are allowed. + This function is always non-blocking. When setting some typeof configuration data, an + asynchronous process is invoked to check the correctness of the data, such as doing address conflict + detection on the manually set local IPv4 address. EFI_NOT_READY is returned immediately to + indicate that such an asynchronous process is invoked and the process is not finished yet. The caller + willing to get the result of the asynchronous process is required to call RegisterDataNotify() + to register an event on the specified configuration data. Once the event is signaled, the caller can call + GetData()to get back the configuration data in order to know the result. For other types of + configuration data that do not require an asynchronous configuration process, the result of the + operation is immediately returned. + + @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. + @param[in] DataType The type of data to set. + @param[in] DataSize Size of the buffer pointed to by Data in bytes. + @param[in] Data The data buffer to set. The type ofthe data buffer is associated + with the DataType. + + @retval EFI_SUCCESS The specified configuration data for the EFI IPv4 network stack is set + successfully. + @retval EFI_INVALID_PARAMETER One or more of the following are TRUE: + This is NULL. + Data is NULL. + One or more fields in Data do not match the requirement of the data type + indicated by DataType. + @retval EFI_WRITE_PROTECTED The specified configuration data is read-only or the specified configuration + data can not be set under the current policy. + @retval EFI_ACCESS_DENIED Another set operation on the specified configuration data is already in process. + @retval EFI_NOT_READY An asynchronous process is invoked to set the specified configuration data and + the process is not finished yet. + @retval EFI_BAD_BUFFER_SIZE The DataSize does not match the size of the type indicated by DataType. + @retval EFI_UNSUPPORTED This DataType is not supported. + @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. + @retval EFI_DEVICE_ERROR An unexpected system error or network error occurred. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG2_SET_DATA) ( + IN EFI_IP4_CONFIG2_PROTOCOL *This, + IN EFI_IP4_CONFIG2_DATA_TYPE DataType, + IN UINTN DataSize, + IN VOID *Data + ); + +/** + Get the configuration data for the EFI IPv4 network stack running on the communication device this + EFI IPv4 Configuration II Protocol instance manages. + + This function returns the configuration data of type DataType for the EFI IPv4 network stack + running on the communication device this EFI IPv4 Configuration II Protocol instance manages. + The caller is responsible for allocating the buffer usedto return the specified configuration data and + the required size will be returned to the caller if the size of the buffer is too small. + EFI_NOT_READY is returned if the specified configuration data is not ready due to an already in + progress asynchronous configuration process. The caller can call RegisterDataNotify() to + register an event on the specified configuration data. Once the asynchronous configuration process is + finished, the event will be signaled and a subsequent GetData() call will return the specified + configuration data. + + @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. + @param[in] DataType The type of data to get. + @param[out] DataSize On input, in bytes, the size of Data. On output, in bytes, the size + of buffer required to store the specified configuration data. + @param[in] Data The data buffer in which the configuration data is returned. The + type of the data buffer is associated with the DataType. Ignored + if DataSize is 0. + + @retval EFI_SUCCESS The specified configuration data is got successfully. + @retval EFI_INVALID_PARAMETER One or more of the followings are TRUE: + This is NULL. + DataSize is NULL. + Data is NULL if *DataSizeis not zero. + @retval EFI_BUFFER_TOO_SMALL The size of Data is too small for the specified configuration data + and the required size is returned in DataSize. + @retval EFI_NOT_READY The specified configuration data is not ready due to an already in + progress asynchronous configuration process. + @retval EFI_NOT_FOUND The specified configuration data is not found. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG2_GET_DATA) ( + IN EFI_IP4_CONFIG2_PROTOCOL *This, + IN EFI_IP4_CONFIG2_DATA_TYPE DataType, + IN OUT UINTN *DataSize, + IN VOID *Data OPTIONAL + ); + +/** + Register an event that is to be signaled whenever a configuration process on the specified + configuration data is done. + + This function registers an event that is to be signaled whenever a configuration process on the + specified configuration data is done. An event can be registered for different DataType + simultaneously and the caller is responsible for determining which type of configuration data causes + the signaling of the event in such case. + + @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. + @param[in] DataType The type of data to unregister the event for. + @param[in] Event The event to register. + + @retval EFI_SUCCESS The notification event for the specified configuration data is + registered. + @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL. + @retval EFI_UNSUPPORTED The configuration data type specified by DataType is not supported. + @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. + @retval EFI_ACCESS_DENIED The Event is already registered for the DataType. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG2_REGISTER_NOTIFY) ( + IN EFI_IP4_CONFIG2_PROTOCOL *This, + IN EFI_IP4_CONFIG2_DATA_TYPE DataType, + IN EFI_EVENT Event + ); + +/** + Remove a previously registered event for the specified configuration data. + + This function removes a previously registeredevent for the specified configuration data. + + @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. + @param[in] DataType The type of data to remove the previously registered event for. + @param[in] Event The event to unregister. + + @retval EFI_SUCCESS The event registered for the specified configuration data is removed. + @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL. + @retval EFI_NOT_FOUND The Eventhas not been registered for the specified DataType. +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG2_UNREGISTER_NOTIFY) ( + IN EFI_IP4_CONFIG2_PROTOCOL *This, + IN EFI_IP4_CONFIG2_DATA_TYPE DataType, + IN EFI_EVENT Event + ); + +/// +/// The EFI_IP4_CONFIG2_PROTOCOL is designed to be the central repository for the common +/// configurations and the administrator configurable settings for the EFI IPv4 network stack. +/// An EFI IPv4 Configuration II Protocol instance will be installed on each communication device that +/// the EFI IPv4 network stack runs on. +/// +struct _EFI_IP4_CONFIG2_PROTOCOL { + EFI_IP4_CONFIG2_SET_DATA SetData; + EFI_IP4_CONFIG2_GET_DATA GetData; + EFI_IP4_CONFIG2_REGISTER_NOTIFY RegisterDataNotify; + EFI_IP4_CONFIG2_UNREGISTER_NOTIFY UnregisterDataNotify; +}; + +extern EFI_GUID gEfiIp4Config2ProtocolGuid; + +#endif + diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec index ff5908b3c4..f052730d63 100644 --- a/MdePkg/MdePkg.dec +++ b/MdePkg/MdePkg.dec @@ -1536,6 +1536,27 @@ ## Include/Protocol/Pkcs7Verify.h gEfiPkcs7VerifyProtocolGuid = { 0x47889fb2, 0xd671, 0x4fab, { 0xa0, 0xca, 0xdf, 0x0e, 0x44, 0xdf, 0x70, 0xd6 }} + + ## Include/Protocol/Ip4Config2.h + gEfiIp4Config2ProtocolGuid = { 0x5b446ed1, 0xe30b, 0x4faa, {0x87, 0x1a, 0x36, 0x54, 0xec, 0xa3, 0x60, 0x80 }} + + ## Include/Protocol/Dns4.h + gEfiDns4ServiceBindingProtocolGuid = { 0xb625b186, 0xe063, 0x44f7, { 0x89, 0x5, 0x6a, 0x74, 0xdc, 0x6f, 0x52, 0xb4 }} + + ## Include/Protocol/Dns4.h + gEfiDns4ProtocolGuid = { 0xae3d28cc, 0xe05b, 0x4fa1, { 0xa0, 0x11, 0x7e, 0xb5, 0x5a, 0x3f, 0x14, 0x1 }} + + ## Include/Protocol/Dns6.h + gEfiDns6ServiceBindingProtocolGuid = { 0x7f1647c8, 0xb76e, 0x44b2, { 0xa5, 0x65, 0xf7, 0xf, 0xf1, 0x9c, 0xd1, 0x9e }} + + ## Include/Protocol/Dns6.h + gEfiDns6ProtocolGuid = { 0xca37bc1f, 0xa327, 0x4ae9, { 0x82, 0x8a, 0x8c, 0x40, 0xd8, 0x50, 0x6a, 0x17 }} + + ## Include/Protocol/Http.h + gEfiHttpServiceBindingProtocolGuid = { 0xbdc8e6af, 0xd9bc, 0x4379, {0xa7, 0x2a, 0xe0, 0xc4, 0xe7, 0x5d, 0xae, 0x1c }} + + ## Include/Protocol/Http.h + gEfiHttpProtocolGuid = { 0x7a59b29b, 0x910b, 0x4171, {0x82, 0x42, 0xa8, 0x5a, 0x0d, 0xf2, 0x5b, 0x5b }} # # [Error.gEfiMdePkgTokenSpaceGuid]