From: Jiewen Yao Date: Sat, 25 Mar 2017 02:53:28 +0000 (+0800) Subject: MdeModulePkg/Include: Add IOMMU protocol definition. X-Git-Tag: edk2-stable201903~4035 X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=commitdiff_plain;h=d1fddc4533bf084eff172ff920619197da53b48e MdeModulePkg/Include: Add IOMMU protocol definition. This protocol is to abstract DMA access from IOMMU. 1) Intel "DMAR" ACPI table. 2) AMD "IVRS" ACPI table 3) ARM "IORT" ACPI table. There might be multiple IOMMU engines on one platform. For example, one for graphic and one for rest PCI devices (such as ATA/USB). All IOMMU engines are reported by one ACPI table. All IOMMU protocol provider should be based upon ACPI table. This single IOMMU protocol can handle multiple IOMMU engines on one system. This IOMMU protocol provider can use UEFI device path to distinguish if the device is graphic or ATA/USB, and find out corresponding IOMMU engine. The IOMMU protocol provides 2 capabilities: A) Set DMA access attribute - such as write/read control. B) Remap DMA memory - such as remap above 4GiB system memory address to below 4GiB device address. It provides AllocateBuffer/FreeBuffer/Map/Unmap for DMA memory. The remapping can be static (fixed at build time) or dynamic (allocate at runtime). 4) AMD "SEV" feature. We can have an AMD SEV specific IOMMU driver to produce IOMMU protocol, and manage SEV bit. Cc: Ruiyu Ni Cc: Leo Duran Cc: Brijesh Singh Cc: Ard Biesheuvel Previous patch Tested-by: Brijesh Singh Previous patch Tested-by: Ard Biesheuvel Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao Reviewed-by: Ruiyu Ni Reviewed-by: Leo Duran --- diff --git a/MdeModulePkg/Include/Protocol/IoMmu.h b/MdeModulePkg/Include/Protocol/IoMmu.h new file mode 100644 index 0000000000..9d25c17a5e --- /dev/null +++ b/MdeModulePkg/Include/Protocol/IoMmu.h @@ -0,0 +1,259 @@ +/** @file + EFI IOMMU Protocol. + +Copyright (c) 2017, Intel Corporation. All rights reserved.
+This program and the accompanying materials are licensed and made available under +the terms and conditions of the BSD License that accompanies this distribution. +The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php. + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + + +#ifndef __IOMMU_H__ +#define __IOMMU_H__ + +// +// IOMMU Protocol GUID value +// +#define EDKII_IOMMU_PROTOCOL_GUID \ + { \ + 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } \ + } + +// +// Forward reference for pure ANSI compatability +// +typedef struct _EDKII_IOMMU_PROTOCOL EDKII_IOMMU_PROTOCOL; + +// +// Revision The revision to which the IOMMU interface adheres. +// All future revisions must be backwards compatible. +// If a future version is not back wards compatible it is not the same GUID. +// +#define EDKII_IOMMU_PROTOCOL_REVISION 0x00010000 + +// +// IOMMU Access for SetAttribute +// +// These types can be "ORed" together as needed. +// Any undefined bits are reserved and must be zero. +// +#define EDKII_IOMMU_ACCESS_READ 0x1 +#define EDKII_IOMMU_ACCESS_WRITE 0x2 + +// +// IOMMU Operation for Map +// +typedef enum { + /// + /// A read operation from system memory by a bus master that is not capable of producing + /// PCI dual address cycles. + /// + EdkiiIoMmuOperationBusMasterRead, + /// + /// A write operation from system memory by a bus master that is not capable of producing + /// PCI dual address cycles. + /// + EdkiiIoMmuOperationBusMasterWrite, + /// + /// Provides both read and write access to system memory by both the processor and a bus + /// master that is not capable of producing PCI dual address cycles. + /// + EdkiiIoMmuOperationBusMasterCommonBuffer, + /// + /// A read operation from system memory by a bus master that is capable of producing PCI + /// dual address cycles. + /// + EdkiiIoMmuOperationBusMasterRead64, + /// + /// A write operation to system memory by a bus master that is capable of producing PCI + /// dual address cycles. + /// + EdkiiIoMmuOperationBusMasterWrite64, + /// + /// Provides both read and write access to system memory by both the processor and a bus + /// master that is capable of producing PCI dual address cycles. + /// + EdkiiIoMmuOperationBusMasterCommonBuffer64, + EdkiiIoMmuOperationMaximum +} EDKII_IOMMU_OPERATION; + +// +// IOMMU attribute for AllocateBuffer +// Any undefined bits are reserved and must be zero. +// +#define EDKII_IOMMU_ATTRIBUTE_MEMORY_WRITE_COMBINE 0x0080 +#define EDKII_IOMMU_ATTRIBUTE_MEMORY_CACHED 0x0800 +#define EDKII_IOMMU_ATTRIBUTE_DUAL_ADDRESS_CYCLE 0x8000 + +#define EDKII_IOMMU_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER (EDKII_IOMMU_ATTRIBUTE_MEMORY_WRITE_COMBINE | EDKII_IOMMU_ATTRIBUTE_MEMORY_CACHED | EDKII_IOMMU_ATTRIBUTE_DUAL_ADDRESS_CYCLE) + +#define EDKII_IOMMU_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER (~EDKII_IOMMU_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER) + +/** + Set IOMMU attribute for a system memory. + + If the IOMMU protocol exists, the system memory cannot be used + for DMA by default. + + When a device requests a DMA access for a system memory, + the device driver need use SetAttribute() to update the IOMMU + attribute to request DMA access (read and/or write). + + The DeviceHandle is used to identify which device submits the request. + The IOMMU implementation need translate the device path to an IOMMU device ID, + and set IOMMU hardware register accordingly. + 1) DeviceHandle can be a standard PCI device. + The memory for BusMasterRead need set EDKII_IOMMU_ACCESS_READ. + The memory for BusMasterWrite need set EDKII_IOMMU_ACCESS_WRITE. + The memory for BusMasterCommonBuffer need set EDKII_IOMMU_ACCESS_READ|EDKII_IOMMU_ACCESS_WRITE. + After the memory is used, the memory need set 0 to keep it being protected. + 2) DeviceHandle can be an ACPI device (ISA, I2C, SPI, etc). + The memory for DMA access need set EDKII_IOMMU_ACCESS_READ and/or EDKII_IOMMU_ACCESS_WRITE. + + @param[in] This The protocol instance pointer. + @param[in] DeviceHandle The device who initiates the DMA access request. + @param[in] Mapping The mapping value returned from Map(). + @param[in] IoMmuAccess The IOMMU access. + + @retval EFI_SUCCESS The IoMmuAccess is set for the memory range specified by DeviceAddress and Length. + @retval EFI_INVALID_PARAMETER DeviceHandle is an invalid handle. + @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). + @retval EFI_INVALID_PARAMETER IoMmuAccess specified an illegal combination of access. + @retval EFI_UNSUPPORTED DeviceHandle is unknown by the IOMMU. + @retval EFI_UNSUPPORTED The bit mask of IoMmuAccess is not supported by the IOMMU. + @retval EFI_UNSUPPORTED The IOMMU does not support the memory range specified by Mapping. + @retval EFI_OUT_OF_RESOURCES There are not enough resources available to modify the IOMMU access. + @retval EFI_DEVICE_ERROR The IOMMU device reported an error while attempting the operation. + +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_IOMMU_SET_ATTRIBUTE)( + IN EDKII_IOMMU_PROTOCOL *This, + IN EFI_HANDLE DeviceHandle, + IN VOID *Mapping, + IN UINT64 IoMmuAccess + ); + +/** + Provides the controller-specific addresses required to access system memory from a + DMA bus master. + + @param This The protocol instance pointer. + @param Operation Indicates if the bus master is going to read or write to system memory. + @param HostAddress The system memory address to map to the PCI controller. + @param NumberOfBytes On input the number of bytes to map. On output the number of bytes + that were mapped. + @param DeviceAddress The resulting map address for the bus master PCI controller to use to + access the hosts HostAddress. + @param Mapping A resulting value to pass to Unmap(). + + @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. + @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer. + @retval EFI_INVALID_PARAMETER One or more parameters are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. + @retval EFI_DEVICE_ERROR The system hardware could not map the requested address. + +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_IOMMU_MAP)( + IN EDKII_IOMMU_PROTOCOL *This, + IN EDKII_IOMMU_OPERATION Operation, + IN VOID *HostAddress, + IN OUT UINTN *NumberOfBytes, + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, + OUT VOID **Mapping + ); + +/** + Completes the Map() operation and releases any corresponding resources. + + @param This The protocol instance pointer. + @param Mapping The mapping value returned from Map(). + + @retval EFI_SUCCESS The range was unmapped. + @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). + @retval EFI_DEVICE_ERROR The data was not committed to the target system memory. +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_IOMMU_UNMAP)( + IN EDKII_IOMMU_PROTOCOL *This, + IN VOID *Mapping + ); + +/** + Allocates pages that are suitable for an OperationBusMasterCommonBuffer or + OperationBusMasterCommonBuffer64 mapping. + + @param This The protocol instance pointer. + @param Type This parameter is not used and must be ignored. + @param MemoryType The type of memory to allocate, EfiBootServicesData or + EfiRuntimeServicesData. + @param Pages The number of pages to allocate. + @param HostAddress A pointer to store the base system memory address of the + allocated range. + @param Attributes The requested bit mask of attributes for the allocated range. + + @retval EFI_SUCCESS The requested memory pages were allocated. + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are + MEMORY_WRITE_COMBINE and MEMORY_CACHED. + @retval EFI_INVALID_PARAMETER One or more parameters are invalid. + @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. + +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_IOMMU_ALLOCATE_BUFFER)( + IN EDKII_IOMMU_PROTOCOL *This, + IN EFI_ALLOCATE_TYPE Type, + IN EFI_MEMORY_TYPE MemoryType, + IN UINTN Pages, + IN OUT VOID **HostAddress, + IN UINT64 Attributes + ); + +/** + Frees memory that was allocated with AllocateBuffer(). + + @param This The protocol instance pointer. + @param Pages The number of pages to free. + @param HostAddress The base system memory address of the allocated range. + + @retval EFI_SUCCESS The requested memory pages were freed. + @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages + was not allocated with AllocateBuffer(). + +**/ +typedef +EFI_STATUS +(EFIAPI *EDKII_IOMMU_FREE_BUFFER)( + IN EDKII_IOMMU_PROTOCOL *This, + IN UINTN Pages, + IN VOID *HostAddress + ); + +/// +/// IOMMU Protocol structure. +/// +struct _EDKII_IOMMU_PROTOCOL { + UINT64 Revision; + EDKII_IOMMU_SET_ATTRIBUTE SetAttribute; + EDKII_IOMMU_MAP Map; + EDKII_IOMMU_UNMAP Unmap; + EDKII_IOMMU_ALLOCATE_BUFFER AllocateBuffer; + EDKII_IOMMU_FREE_BUFFER FreeBuffer; +}; + +/// +/// IOMMU Protocol GUID variable. +/// +extern EFI_GUID gEdkiiIoMmuProtocolGuid; + +#endif diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec index 0ace3f8a11..593bff357a 100644 --- a/MdeModulePkg/MdeModulePkg.dec +++ b/MdeModulePkg/MdeModulePkg.dec @@ -546,6 +546,9 @@ ## Include/Protocol/NonDiscoverableDevice.h gEdkiiNonDiscoverableDeviceProtocolGuid = { 0x0d51905b, 0xb77e, 0x452a, {0xa2, 0xc0, 0xec, 0xa0, 0xcc, 0x8d, 0x51, 0x4a } } + ## Include/Protocol/IoMmu.h + gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } } + # # [Error.gEfiMdeModulePkgTokenSpaceGuid] # 0x80000001 | Invalid value provided.