Elvin Li [Tue, 10 Dec 2013 01:42:56 +0000 (01:42 +0000)]
Per PI 1.3 spec, when Reserved bit set in the SlaveAddress parameter, EFI_NOT_FOUND should be returned in EFI_I2C_HOST_PROTOCOL.QueueRequest().
Signed-off-by: Elvin Li <elvin.li@intel.com> Reviewed-by: Leahy Leroy P <leroy.p.leahy@intel.com> Reviewed-by: Lin Jie <jie.lin@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14952 6f19259b-4bc3-4df7-8a09-765794883524
Wei Liu [Sun, 8 Dec 2013 01:36:25 +0000 (01:36 +0000)]
OvmfPkg: enable Xen specific path
This patch sets PcdPciDisableBusEnumeration to true then makes use of
PublishPeiMemory and XenMemMapInitialization to construct memory map for
Xen guest.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14946 6f19259b-4bc3-4df7-8a09-765794883524
Platforms such as Xen already enumerates PCI bridges and devices. Use
this PCD to control EDK2 behavior.
PcdPciDisableBusEnumeration is placed under [PcdsFixedAtBuild,
PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx], so that it is
possible to alter it during runtime.
The default setting of this PCD is false (allow full PCI enumeration) to
preserve the same behavior before this change.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14940 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin [Fri, 6 Dec 2013 16:12:24 +0000 (16:12 +0000)]
ArmPlatformPkg/ArmPlatformStackLib: Do not directly use PcdArmPrimaryCore
To make the code platform independent we should not use PcdArmPrimaryCore
in libraries other than the platform specific libraries.
Some platforms allow to change the primary core with external registers.
These platforms do not use PcdArmPrimaryCore to identify the primary CPU.
Jeff Fan [Fri, 6 Dec 2013 01:13:11 +0000 (01:13 +0000)]
Fix comments format issue.
Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14934 6f19259b-4bc3-4df7-8a09-765794883524
Elvin Li [Thu, 5 Dec 2013 05:30:27 +0000 (05:30 +0000)]
Following UEFI spec, update SmbiosDxe to use EfiRuntimeServicesData to put SMBIOS table. Update LegacyBiosDxe to move SMBIOS table to reserved memory for backward compatibility.
Signed-off-by: Elvin Li <elvin.li@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14932 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Wed, 4 Dec 2013 08:19:02 +0000 (08:19 +0000)]
MdeModulePkg: SmmLockBox: remove wrong DepEx
The SmmLockBox driver in
"MdeModulePkg/Universal/LockBox/SmmLockBox/SmmLockBox.inf" currently
specifies a DepEx on EFI_SMM_SW_DISPATCH2_PROTOCOL.
However, the driver doesn't use this protocol at all, either directly or
indirectly. It calls SmiHandlerRegister()
[MdeModulePkg/Core/PiSmmCore/Smi.c] to register SmmLockBoxHandler()
(which serves LockBox requests).
In turn, the SMM Core function SmiHandlerRegister() is also implemented
without EFI_SMM_SW_DISPATCH2_PROTOCOL.
The DepEx has been present since the initial commit of the SmmLockBox
driver (SVN r12029); it is probably superfluous. Let's remove it.
(Alternatively, we could extend OvmfPkg/EmuSmmDxe to fake this protocol,
and return EFI_UNSUPPORTED when any member is called.)
Jeff Fan [Wed, 4 Dec 2013 07:07:10 +0000 (07:07 +0000)]
Add InitFlag member in DEBUG_AGENT_PHASE2_CONTEXT to pass into InitializeDebugAgentPhase2().
Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14929 6f19259b-4bc3-4df7-8a09-765794883524
Feng Tian [Tue, 3 Dec 2013 07:04:08 +0000 (07:04 +0000)]
MdeModulePkg/Usb: All h/w related stop operation at DriverBindingStop() should be behind s/w related stop operation, which could avoid h/w not working if s/w stop operation fails.
Laszlo Ersek [Fri, 29 Nov 2013 04:44:22 +0000 (04:44 +0000)]
UefiCpuPkg: Using the "movabsq" instruction to read global variable mDoFarReturnFlag and mErrorCodeFlag to avoid page fault with big RAM sizes (> 2GB).
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14920 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin [Thu, 28 Nov 2013 21:40:48 +0000 (21:40 +0000)]
ArmPkg/BdsLib: Fixed the alignment of the relocated Device Tree
When the Device Tree was loaded above the 32bit address space the operation:
*RelocatedFdt = ALIGN ((UINT64)*RelocatedFdt, (UINT32)FdtAlignment);
was returning an incorrect address.
Olivier Martin [Thu, 28 Nov 2013 21:40:14 +0000 (21:40 +0000)]
EmbeddedPkg/EmbeddedPkg.dec: Defined default values for PcdPrePiCpuMemorySize & PcdPrePiCpuIoSize
This change introduces default values for the PCDs PcdPrePiCpuMemorySize & PcdPrePiCpuIoSize.
These values are for the architectures ARM, AARCH64, IA32 and X64.
The redefinition of these PCDs (with the same default values) have been removed from the DSC files.
Note: the default value for AARCH64 was 32. It was preventing to allocate buffer above the 32bit
address space.
Olivier Martin [Thu, 28 Nov 2013 21:38:32 +0000 (21:38 +0000)]
ArmPlatformPkg/ArmVExpressLibCTA9x4: Fixed the initial secondary core bringup when remapping DRAM at 0x0
If the DRAM is remapped at 0x0 then we need to wake up the secondary cores from wfe
(waiting for the memory to be initialized) as the instruction is still in the remapped
flash region at 0x0 to make them jumping into the C-code which lives in the NOR1 at 0x44000000 before
the region 0x0 is remapped as DRAM.
Olivier Martin [Thu, 28 Nov 2013 21:36:17 +0000 (21:36 +0000)]
ArmPlatformPkg/ArmVExpressPkg: Fixed when EDK2_ARMVE_STANDALONE is set to zero
If EDK2_ARMVE_STANDALONE is not defined then the value is set to 1.
The developer has to explicit set the macro to zero to build a non standalone build.
It means this macro is always defined.
Eric Dong [Wed, 27 Nov 2013 02:27:16 +0000 (02:27 +0000)]
Refine the logic, keep highlight on the selectable menu, and base on priority order of option string/ prompt string/ text two string to highlight for a statement.
Shumin Qiu [Tue, 26 Nov 2013 07:36:29 +0000 (07:36 +0000)]
Follow UEFI spec to add the definition for EFI_SPECIFICATION_VERSION, and update other table version to refer to it. Remove the “/D TIANO_RELEASE_VERSION=0x00080006” option in Nt32Pkg DSC file, since it’s not used in source code.
Ruiyu Ni [Tue, 26 Nov 2013 05:41:34 +0000 (05:41 +0000)]
Fix Duet hang/reboot issue due to the NULL instance of CpuExceptionHandlerLib is used.
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14899 6f19259b-4bc3-4df7-8a09-765794883524
Feng Tian [Fri, 22 Nov 2013 07:46:00 +0000 (07:46 +0000)]
MdeModulePkg/UsbBus&XhciDxe: Solve a bug that 2 or more tiers SS hubs with SS devices may have no response.
1.Port reset process may not be proper for some vendor's SS hubs. If the corresponding port shows the reset has been done by C_RESET bit we have to skip the whole reset process for attached devices.
2.Clean C_BH_RESET bit immediately to avoid usb timer entering too many times when 5 tiers hubs are connected.
3.Stop checking URB if there is an error happened.
4.Better error handling for fast hot-plug.
Jeff Fan [Fri, 22 Nov 2013 06:31:18 +0000 (06:31 +0000)]
Updated OvmfPkg to use suitable CPU Exception Handler Library instances.
Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14887 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan [Fri, 22 Nov 2013 06:30:01 +0000 (06:30 +0000)]
1. DebugAgentLib will install reserved vector table to persist vectors.
2. Update PeCoffExtraActionLib to detect if debug agent initialized or not by checking each IDT entry instead of whole IDT table.
Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14886 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan [Fri, 22 Nov 2013 06:24:41 +0000 (06:24 +0000)]
1. Separated DxeSmmCpuExceptionHandlerLib.inf into 2 instance DxeCpuExceptionHandlerLib.inf and SmmCpuExceptionHandlerLib.inf.
2. Updated CPU Exception Handler Library instance according to the new CPU Exception Handler Library class definitions.
3. Updated CPU Exception Handler Library instance to handle the vector attributes defined in PI 1.2.1.
Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Hot Tian <hot.tian@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14885 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan [Fri, 22 Nov 2013 06:15:51 +0000 (06:15 +0000)]
1. DxeIplPeim will locate Vector Handoff Table PPI and build GUIDed HOB if it has.
2. DxeMain will get Vector Handoff Table GUIDed HOB to install configuration table if it has.
3. Updated CPU Exception Handler Library to provide 3 new APIs to replace original one API and updated NULL instance accordingly.
4. Updated DxeMain/CapsuleX64/BootSriptExectorDxe to use the new API in CPU Exception Handler Lib.
Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14884 6f19259b-4bc3-4df7-8a09-765794883524
Jaben Carsey [Thu, 21 Nov 2013 22:51:52 +0000 (22:51 +0000)]
ShellPkg: Correctly support "map -c"
When “map –c” is run, the mapped items should be displayed with the consistent name as the one listed to the left and all other names listed as “alias(s)”
Chris Phillips [Thu, 21 Nov 2013 17:21:59 +0000 (17:21 +0000)]
ShellPkg: Update pci command to use ShellPrintEx()
- Also minor simplification to the PciPrintClassCode() function.
- Remove invalid duplicate gShellDebug1HiiHandle argument in STR_PCI_NO_FIND print.
Jaben Carsey [Wed, 20 Nov 2013 17:25:02 +0000 (17:25 +0000)]
ShellPkg: Change MM command output during script execution
- Automatically use non-interactive mode during script execution.
- Automatically use non-interactive mode when a specific value is read (omitting this behavior was a violation of the UEFI Shell Spec)
- Only output the value read in when reading a value in a script; this allows automated use of the MM command.
Star Zeng [Wed, 20 Nov 2013 02:08:21 +0000 (02:08 +0000)]
MdeModulePkg and Nt32Pkg Pcd: Add the new EFI_GET_PCD_INFO_PROTOCOL and EFI_GET_PCD_INFO_PPI support for PI 1.2.1 compliance.
It has no obviously benefit to reduce size by PcdPcdInfoGeneration, so remove this PCD.
And PCD_INFO_GENERATION flag can be used to enable/disable PCD info feature, a sample is added in Nt32Pkg to show how to use this flag.
Star Zeng [Wed, 20 Nov 2013 02:04:23 +0000 (02:04 +0000)]
MdeModulePkg and Nt32Pkg Pcd: Add the new EFI_GET_PCD_INFO_PROTOCOL and EFI_GET_PCD_INFO_PPI support for PI 1.2.1 compliance.
It has no obviously benefit to reduce size by PcdPcdInfoGeneration, so remove this PCD.
And PCD_INFO_GENERATION flag can be used to enable/disable PCD info feature, a sample is added in Nt32Pkg to show how to use this flag.
Long, Qin [Tue, 19 Nov 2013 02:57:19 +0000 (02:57 +0000)]
Fixed one typo in MathRShiftU64.S stub implementation; Add one digest algorithm registration to make sure the underlying algorithm is available for the default OpenSSL software PRNG implementation.
Long, Qin [Tue, 19 Nov 2013 01:49:49 +0000 (01:49 +0000)]
Add UEFI RNG Protocol support. The driver will leverage Intel Secure Key technology to produce the Random Number Generator protocol, which is used to provide high-quality random numbers for use in applications, or entropy for seeding other random number generators. Refer to http://software.intel.com/en-us/articles/intel-digital-random-number-generator-drng-software-implementation-guide/ for more information about Intel Secure Key technology.
Signed-off-by: Long, Qin <qin.long@intel.com> Reviewed-by: Fu, Siyuan <siyuan.fu@intel.com> Reviewed-by: Rosenbaum, Lee G <lee.g.rosenbaum@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@14858 6f19259b-4bc3-4df7-8a09-765794883524
Jaben Carsey [Fri, 15 Nov 2013 20:28:58 +0000 (20:28 +0000)]
ShellPkg: "For Run" fix for spaces between numerals
Since this is expected to use a string with spaces between some of the numbers, the function must halt on spaces and not skip them.