Michael Kinney [Fri, 30 Oct 2015 17:53:31 +0000 (17:53 +0000)]
UefiCpuPkg: LocalApicLib: Add API to set SoftwareEnable bit
The LocalApicLib does not provide a function to manage the state of the
Local APIC SoftwareEnable bit in the Spurious Vector register. There
are cases where this bit needs to be managed without side effects to.
other Local APIC registers. One use case is in the DebugAgent in the
SourceLevelDebugPkg.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18711 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Fri, 30 Oct 2015 17:32:27 +0000 (17:32 +0000)]
UefiCpuPkg: CpuDxe: Update GDT to be consistent with DxeIplPeim
The PiSmmCpuDxeSmm module makes some assumptions about GDT selectors
that are based on the GDT layout from the DxeIplPeim. For example,
the protected mode entry code and (where appropriate) the long mode
entry code in the UefiCpuPkg/PiSmmCpuDxeSmm/*/MpFuncs.* assembly
files, which are used during S3 resume, open-code segment selector
values that depend on DxeIplPeim's GDT layout.
This updates the CpuDxe module to use the same GDT layout as the
DxeIplPeim. This enables modules that are dispatched after
CpuDxe to find, and potentially save and restore, a GDT layout that
matches that of DxeIplPeim. The DxeIplPeim has a 2 GDT entries for
data selectors that are identical. These are LINEAR_SEL (GDT Offset
0x08)and LINEAR_DATA64_SEL (GDT offset 0x30). LINEAL_SEL is used for
for IA32 DXE and the LINEAR_DATA64_SEL is used for X64 DXE. This
duplicate data selector was added to the CpuDxe module to keep the
GDT and all selectors consistent.
Using a consistent GDT also improves debug experience.
Nagaraj Hegde [Fri, 30 Oct 2015 06:47:54 +0000 (06:47 +0000)]
NetworkPkg: HttpDxe sometimes free a pointer twice
In EfiHttpRequest, HostName was getting freed twice whenever
HttpTransmitTcp4 failed. Moved FreePool (HostName) after
HttpTransmitTcp4 call to avoid a double free.
David Woodhouse [Thu, 29 Oct 2015 14:17:31 +0000 (14:17 +0000)]
CryptoPkg/OpensslLib: Move OPENSSL_NO_xxx defines into opensslconf.h
Putting these on the command line as we do at the moment means that they
are *only* visible when actually building the OpenSSL code itself. When
building other things like BaseCryptLib, they were missing. Which could
lead to discrepancies in structures defined by the header files, between
the OpenSSL code and the EDK II code which calls it.
Move the definitions into opensslconf.h where they would normally live
in a standard build of OpenSSL.
Note: Do *not* set OPENSSL_NO_LHASH or OPENSSL_NO_OCSP since those weren't
effectively disabled before; the directories was still being included in
the build. If we actually disable then, the build breaks. We can hopefully
fix at least OCSP upstream later, but one thing at a time...
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18708 6f19259b-4bc3-4df7-8a09-765794883524
David Woodhouse [Thu, 29 Oct 2015 14:17:15 +0000 (14:17 +0000)]
CryptoPkg: Fix OpenSSL BN wordsize and OPENSSL_SYS_UEFI handling
We were manually setting -DSIXTY_FOUR_BIT_LONG or -DTHIRTY_TWO_BIT on
the compiler command line when building OpensslLib itself, but not when
building BaseCryptLib.
But when building BaseCryptLib, we weren't setting OPENSSL_SYS_UEFI
*either*. This meant that *that* build was picking up the definition
from <openssl/opensslconf.h>, and was thus *different* to the version
the library was built with, in some cases.
So set OPENSSL_SYS_UEFI consistently in OpensslSupport.h and *also*
define either SIXTY_FOUR_BIT or THIRTY_TWO_BIT there too.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18706 6f19259b-4bc3-4df7-8a09-765794883524
David Woodhouse [Thu, 29 Oct 2015 14:17:02 +0000 (14:17 +0000)]
CryptoPkg/OpensslLib: Undefine NO_BUILTIN_VA_FUNCS to fix varargs breakage
Instead of patching OpenSSL to add EFIAPI to the one varargs function we
actually *noticed* breakage in, let's fix the problem in a more coherent
way by undefining NO_BUILTIN_VA_FUNCS.
That way, the VA_START and similar macros will actually do the right
thing for non-EFIAPI functions, which is to use the GCC builtins.
It's still fairly broken elsewhere in the tree, with the VA_START macro
being used from both EFIAPI and non-EFIAPI functions — and being broken
in the latter case. We probably ought to make EFIAPI a no-op everywhere
and add -mabi=ms to the GCC builds. But that's a project for another day.
For now, just fix the OpenSSL build in a cleaner fashion.
David Woodhouse [Thu, 29 Oct 2015 14:16:45 +0000 (14:16 +0000)]
CryptoPkg/BaseCryptLib: Use X509_V_FLAG_PARTIAL_CHAIN
Since OpenSSL 1.0.2 we can set this flag on the X509_STORE to instruct
OpenSSL to accept non-self-signed certificates as trusted. So we don't
need two entirely identical copies of a verify_cb() function which makes
it ignore the resulting errors.
We also *didn't* use that verify_cb() function for X509VerifyCert(), but
probably should have done. So that can get X509_V_FLAG_PARTIAL_CHAIN for
consistency, too.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18703 6f19259b-4bc3-4df7-8a09-765794883524
David Woodhouse [Thu, 29 Oct 2015 14:16:30 +0000 (14:16 +0000)]
CryptoPkg/BaseCryptLib: Use accessor functions for ASN1_OBJECT
OpenSSL 1.1 introduces new OBJ_get0_data() and OBJ_length() accessor
functions and makes ASN1_OBJECT an opaque type.
Unlike the accessors in previous commits which *did* actually exist
already but just weren't mandatory, these don't exist in older versions
of OpenSSL. So introduce macros which do the right thing, for
compatibility.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18701 6f19259b-4bc3-4df7-8a09-765794883524
David Woodhouse [Thu, 29 Oct 2015 14:16:22 +0000 (14:16 +0000)]
CryptoPkg/BaseCryptLib: Use accessor functions for X509_ATTRIBUTE
In OpenSSL 1.1, the X509_ATTRIBUTE becomes an opaque structure and we will
no longer get away with accessing its members directly. Use the accessor
functions X509_ATTRIBUTE_get0_object0() and X509_ATTRIBUTE_get0_type()
instead.
Also be slightly more defensive about unlikely failure modes.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18700 6f19259b-4bc3-4df7-8a09-765794883524
David Woodhouse [Thu, 29 Oct 2015 14:16:15 +0000 (14:16 +0000)]
CryptoPkg/BaseCryptLib: Use i2d_X509_NAME() instead of abusing X509_NAME
In OpenSSL 1.1, the X509_NAME becomes an opaque structure and we will no
longer get away with accessing its members directly. Use i2d_X509_NAME()
instead.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18699 6f19259b-4bc3-4df7-8a09-765794883524
David Woodhouse [Thu, 29 Oct 2015 14:15:53 +0000 (14:15 +0000)]
CryptoPkg/BaseCryptLib: Add missing OpenSSL includes
OpenSSL 1.1 has cleaned up its include files a little, and it will now
be necessary to directly include things like <openssl/bn.h> if we want
to use them, rather than assuming they are included indirectly from
other headers.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18698 6f19259b-4bc3-4df7-8a09-765794883524
Thomas Palmer [Thu, 29 Oct 2015 12:59:06 +0000 (12:59 +0000)]
EmbeddedPkg: Add EFIAPI to several Ebl functions
The EFIAPI function declaration is missing for several functions in the
EmbeddedPkg/Ebl directory. A few function pointer struct members expect
EFIAPI though and GCC46/X64 will fail to compile the directory without
them.
Ruiyu Ni [Thu, 29 Oct 2015 03:26:00 +0000 (03:26 +0000)]
MdeModulePkg: Do not dump NULL padding resource descriptor
Add a check for ResourcePaddingDescriptors being a valid pointer in
DumpPpbPaddingResource() to prevent looping on memory not owned by
PciBusDxe. The ResourcePaddingDescriptors is initialized to NULL
when the PCI_IO_DEVICE structure is allocated and remains NULL if
no PCI hot plug controllers are present. This issue is only
observed when DEBUG_CODE() macros are enabled and was introduced
by the following patch:
[edk2] [Patch] MdeModulePkg: Fix a PciBusDxe hot plug bug
SVN revsion 18658
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Kinney Michael <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18696 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng [Thu, 29 Oct 2015 01:13:59 +0000 (01:13 +0000)]
MdeModulePkg SmbiosMeasurementDxe: Correct the comments
1. Correct the return comments of entrypoint function.
2. Add parameters' comments for MeasureSmbiosTable().
3. Correct the Protocols and Guids usage comments in SmbiosMeasurementDxe.inf.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18695 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng [Thu, 29 Oct 2015 01:13:07 +0000 (01:13 +0000)]
MdeModulePkg SmbiosMeasurementDxe: Use EFI_D_VERBOSE for internal dump functions
Use EFI_D_VERBOSE instead of EFI_D_INFO in InternalDumpData() and InternalDumpHex().
And also add DEBUG_CODE wrapper to InternalDumpHex() call.
It is to avoid the bother from the internal verbose debug information.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18693 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Wed, 28 Oct 2015 07:16:38 +0000 (07:16 +0000)]
UefiCpuPkg: SmmCpuFeaturesLib: Add MSR_SMM_FEATURE_CONTROL support
Add support for the reading and writing MSR_SMM_FEATURE_CONTROL
through the SmmCpuFeaturesIsSmmRegisterSupported(),
SmmCpuFeaturesGetSmmRegister(), and SmmCpuFeaturesSetSmmRegister()
functions. This MSR is supported if the Family/Model is 06_3C,
06_45, or 06_46.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com> Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18690 6f19259b-4bc3-4df7-8a09-765794883524
This change is triggered by R18654 "Enhance variable performance by reading from existed memory cache"
that changed the code to use CacheVariable to improve performance.
So the CacheVariable->InDeletedTransitionPtr NULL pointer check needs to be moved to the place before
it is been used.
Michael Kinney [Tue, 27 Oct 2015 16:15:03 +0000 (16:15 +0000)]
UefiCpuPkg: PiSmmCpuDxeSmm: Replace PcdSet## with PcdSet##S
PcdSet## has no error status returned, then the caller has no idea about
whether the set operation is successful or not. PcdSet##S were added to
return error status and PcdSet## APIs were put in ifndef
DISABLE_NEW_DEPRECATED_INTERFACES condition. To adopt PcdSet##S and
further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined,
we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii
PCD set failure is a legal case. So for DynamicDefault, we add assert
when set failure. For DynamicHii, we add logic to handle it.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com> Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18686 6f19259b-4bc3-4df7-8a09-765794883524
Fix the wrong return value of both InternalSyncIncrement()
and InternalSyncDecrement(). The return value shouldn't
be the address of input parameter. It should be the updated
value of input parameter instead.
Eric Dong [Tue, 27 Oct 2015 07:37:56 +0000 (07:37 +0000)]
MdeModulePkg SetupBrowserDxe: Save global variable values before nest function called.
The SendForm function can be called nest in it. This function also uses some global variables. So we must save global variable values before it been called again.
Checked in the missing change for gBrowserFormSetList.
Yao, Jiewen [Tue, 27 Oct 2015 04:46:50 +0000 (04:46 +0000)]
Move Smbios measurement from TCG driver to Smbios driver.
This is patch to add smbios measurement.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Yao, Jiewen [Tue, 27 Oct 2015 03:54:08 +0000 (03:54 +0000)]
Move Smbios measurement from TCG driver to Smbios driver.
This is patch to remove smbios measurement in TCG driver. There will be other patch to add it in Smbios driver.
The problem of current SMBIOS measurement is:
1) TCG drivers do not support SMBIOS3.0 table.
2) TCG drivers do not follow TCG platform spec on: "Platform configuration information that is automatically updated,
such as clock registers, and system unique information, such as asset numbers or serial numbers,
MUST NOT be measured into PCR [1], or any other PCR."
So we decide to move Smbios measurement from TCG drivers to Smbios driver.
Yao, Jiewen [Tue, 27 Oct 2015 03:49:31 +0000 (03:49 +0000)]
Add suppressif around TCG hash seleciton checkbox in TCG2
Previous TCG2 configuration UI always add all TCG defined hash algorithm to let user select which one need be used.
This brings risk that user might select unsupported hash, and selection is rejected later.
So we enhance to UI to hide unsupported hash algorithm.
Michael Kinney [Mon, 26 Oct 2015 16:40:52 +0000 (16:40 +0000)]
UefiCpuPkg: PiSmmCpuDxeSmm: Remove unused references to SmmLib
The PiSmmCpuDxeSmm module does not use any services from the SmmLib.
This change removes the SmmLib from PiSmmCpuDxeSmm module and also
removes the lib mapping in the UefiCpuPkg DSC file because no other
modules in the UefiCpuPkg use the SmmLib.
Removal of SmmLib is now possible because the only API call to it,
ClearSmi(), was ultimately removed from PiSmmCpuDxeSmm -- see the
"BUGBUG" comment in git commit 529a5a86.
Cc: "Yao, Jiewen" <jiewen.yao@intel.com> Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18673 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Mon, 26 Oct 2015 14:58:46 +0000 (14:58 +0000)]
OvmfPkg: QemuFlashFvbServicesRuntimeDxe: clean up includes and libraries
Before introducing the SMM driver interface, clean up #include directives
and [LibraryClasses] by:
- removing what's not directly used (HobLib and UefiLib),
- adding what's used but not spelled out (DevicePathLib),
- sorting the result.
This helps with seeing each source file's dependencies and with
determining the library classes for the SMM driver.
Laszlo Ersek [Mon, 26 Oct 2015 14:58:39 +0000 (14:58 +0000)]
OvmfPkg: QemuFlashFvbServicesRuntimeDxe: split out runtime DXE specifics
In preparation for introducing an SMM interface to this driver, move the
following traits to separate files, so that we can replace them in the new
SMM INF file:
- Protocol installations. The SMM driver will install protocol interfaces
in the SMM protocol database, using SMM services.
- Virtual address change handler and pointer conversions. SMM drivers run
with physical mappings and pointers must not be converted.
There are further restrictions and changes for an SMM driver, but the rest
of the code either complies with those already, or will handle the changes
transparently. For example:
- SMM drivers have access to both UEFI and SMM protocols in their entry
points (see the PI spec 1.4, "1.7 SMM Driver Initialization"),
- MemoryAllocationLib has an SMM instance that serves allocation requests
with the gSmst->SmmAllocatePool() service transparently, allocating
runtime-marked SMRAM.
In every case, the entry at subscript zero is meant as "physical address",
while the entry at subscript one is meant as "virtual address" -- a
pointer to the same object. The virtual address entry is originally
initialized to the physical address, and then it is converted to the
virtual mapping in FvbVirtualddressChangeEvent().
Functions that (a) read the listed fields and (b) run both before and
after the virtual address change event -- since this is a runtime DXE
driver -- derive the correct array subscript by calling the
EfiGoneVirtual() function from UefiRuntimeLib.
The problem with the above infrastructure is that it's entirely
superfluous.
EfiGoneVirtual() "knows" whether EFI has gone virtual only because the
UefiRuntimeLib constructor registers the exact same kind of virtual
address change callback, and the callback flips a static variabe to TRUE,
and EfiGoneVirtual() queries that static variable.
In effect this means for QemuFlashFvbServicesRuntimeDxe: "when there is a
virtual address change, convert the entries with subscript one from
physical to virtual, and from then on use the entries with subscript one".
This would only make sense if QemuFlashFvbServicesRuntimeDxe ever needed
the original (physical) addresses (ie. the entries with subscript zero)
after the virtual address change, but that is not the case.
Replace the arrays with single elements. The subscript zero elements
simply disappear, and the single elements take the role of the prior
subscript one elements.
Laszlo Ersek [Mon, 26 Oct 2015 14:58:26 +0000 (14:58 +0000)]
OvmfPkg: QemuFlashFvbServicesRuntimeDxe: remove FvbScratchSpace field
The ESAL_FWB_GLOBAL.FvbScratchSpace array is never initialized (it
contains garbage from AllocateRuntimePool()). Its element at subscript one
(=FVB_VIRTUAL), containing garbage as well, is converted to virtual
mapping. Then the array is never used again.
Laszlo Ersek [Mon, 26 Oct 2015 14:58:08 +0000 (14:58 +0000)]
OvmfPkg: QemuFlashFvbServicesRuntimeDxe: rewrap source code to 79 chars
Some of the line lengths in this driver are atrocious. While we have to
put up with the status quo outside of OvmfPkg, we can at least rewrap this
driver before refactoring it.
In the FvbInitialize() function there's no way around introducing two
local variables, just for the sake of sensibly rewrapping the code.
Furthermore, in "FwBlockService.c" the function comment blocks are now
indented; their original position causes diff to print bogus function
names at the top of hunks.
Qiu Shumin [Mon, 26 Oct 2015 13:28:01 +0000 (13:28 +0000)]
ShellPkg: Fix 'EfiShellExecute' doesn't get command status correctly.
1. Add a new function 'RunShellCommand' to return command status, thus 'EfiShellExecute' can get the command return status of 'CommandLine'.
2. Refine the code logic of 'EfiShellExecute' to make the new image of shell be loaded only if 'Environment' isn't NULL.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Qiu Shumin <shumin.qiu@intel.com> Signed-off-by: Jin Eric <eric.jin@intel.com> Signed-off-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18664 6f19259b-4bc3-4df7-8a09-765794883524
Yonghong Zhu [Mon, 26 Oct 2015 03:26:55 +0000 (03:26 +0000)]
BaseTools:added extern protocol/PPI/GUID definition in AutoGen for Library
We already added the extern declaration for protocols/PPI/GUID in AutoGen.h
file for driver, but missing this feature for the Library. so this patch
add it.
Ruiyu Ni [Fri, 23 Oct 2015 08:29:38 +0000 (08:29 +0000)]
MdeModulePkg: Fix a PciBusDxe hot plug bug
For a hot plug bridge with device attached, PciBusDxe driver reserves
the resources which equal to the total amount of padding resource
returned from HotPlug->GetResourcePadding() and the actual occupied
resource by the attached device. The behavior is incorrect.
Correct behavior is to reserve the bigger one between the padding
resource and the actual occupied resource.
Derek Lin [Fri, 23 Oct 2015 05:28:38 +0000 (05:28 +0000)]
MdeModulePkg Variable: Enhance variable performance by reading from existed memory cache.
Current variable driver already have memory cache to improve performance.
Change the code which read from physical MMIO address to read from memory cache.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Derek Lin <derek.lin2@hpe.com> Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18654 6f19259b-4bc3-4df7-8a09-765794883524
Qiu Shumin [Fri, 23 Oct 2015 02:03:20 +0000 (02:03 +0000)]
ShellPkg: Follow spec to remove the last '\' char in return name of GetCurDir().
In Shell spec 2.1 the return name of EFI_SHELL_PROTOCOL.GetCurDir() is defined as 'fs0:\current-dir' while in current implementation it's 'fs0:\current-dir\'.
To follow spec the patch removed the redundant '\' char.
Since it has been broken for a long time, some codes may depend on the broken behavior.
After this change 'EFI_SHELL_PROTOCOL.GetCurDir()' and 'UefiShellLib.ShellGetCurrentDir()'
will return a current directory string without tailing '\' (fs0:\current-dir), the value of Shell environment variable 'cwd' will become 'fs0:\current-dir' as well.
This patch has updated all the code in EDKII to make them depend on the new behavior.
Developers should check whether 'GetCurDir()' and 'ShellGetCurrentDir' are used in their source code.
Jordan Justen [Thu, 22 Oct 2015 06:01:02 +0000 (06:01 +0000)]
BaseTools/Scripts: Add PatchCheck.py script
This script can be used to check some expected rules for EDK II
patches. It only works on git formatted patches.
It checks both the commit message and the lines that are added in the
patch diff.
In the commit message it verifies line lengths, signature formats, and
the Contributed-under tag.
In the patch, it checks that line endings are CRLF for all files that
don't have a .sh extension. It verifies that no trailing whitespace is
present and that tab characters are not used.
Patch contributors should use this script prior to submitting their
patches. Package maintainers can also use it to verify incoming
patches.
It can also be run by specifying a git revision list, so actual patch
files are not always required.
For example, to checkout this last 5 patches in your git branch you
can run:
python PatchCheck.py HEAD~5..
Or, a shortcut (like git log):
python PatchCheck.py -5
The --oneline option works similar to git log --oneline.
Empty cdroms are not going to connect, avoid waiting for the backend to
switch to state 4, which is never going to happen, and return
error instead from XenPvBlockFrontInitialization(). Detect an
empty cdrom by looking at the "params" node on xenstore, which is set to
"" or "aio:" for empty drives by libxl.
Eric Dong [Wed, 21 Oct 2015 06:10:57 +0000 (06:10 +0000)]
MdeModulePkg SetupBrowserDxe: Save global variable values before nest function called.
The SendForm function can be called nest in it. This function also uses some global variables. So we must save global variable values before it been called again.
Old implementation miss to save some global variables, this patch fixed it.
Daryl McDaniel [Mon, 19 Oct 2015 21:39:46 +0000 (21:39 +0000)]
AppPkg: Add switch to cause stderr to be aliased to stdout.
Python, as distributed, sends its prompts and other interactive output
to stderr, which uses the platforms STDERR device for output. If STDERR output
is not visible, it may appear that Python has hung. Several people have
reported problems on platforms that don't enable STDERR. These include
platforms without a Setup utility and those without Setup options for STDERR.
This patch adds a command-line switch, -#, to Python. If this switch
is present, stderr will be aliased to stdout.
AppPkg/Applications/Python/PyMod-2.7.2/Modules/main.c: New file, modified
version of AppPkg/Applications/Python/Python-2.7.2/Modules/main.c. Add the -#
option which causes stderr to be aliased to stdout. Add a description of this
switch to the Help output.
AppPkg/Applications/Python/PythonCore.inf: Reference main.c from PyMod-2.7.2
instead of from Python-2.7.2 so that the modified version is used.
Michael Kinney [Mon, 19 Oct 2015 19:13:31 +0000 (19:13 +0000)]
UefiCpuPkg: Add PiSmmCpuDxeSmm module X64 files
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18647 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:13:13 +0000 (19:13 +0000)]
UefiCpuPkg: Add PiSmmCpuDxeSmm module IA32 files
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18646 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:12:53 +0000 (19:12 +0000)]
UefiCpuPkg: Add PiSmmCpuDxeSmm module no IA32/X64 files
Add module that initializes a CPU for the SMM environment and
installs the first level SMI handler. This module along with the
SMM IPL and SMM Core provide the services required for
DXE_SMM_DRIVERS to register hardware and software SMI handlers.
CPU specific features are abstracted through the SmmCpuFeaturesLib
Platform specific features are abstracted through the
SmmCpuPlatformHookLib
Several PCDs are added to enable/disable features and configure
settings for the PiSmmCpuDxeSmm module
Changes between [PATCH v1] and [PATCH v2]:
1) Swap PTE init order for QEMU compatibility.
Current PTE initialization algorithm works on HW but breaks QEMU
emulator. Update the PTE initialization order to be compatible
with both.
2) Update comment block that describes 32KB SMBASE alignment requirement
to match contents of Intel(R) 64 and IA-32 Architectures Software
Developer's Manual
3) Remove BUGBUG comment and call to ClearSmi() that is not required.
SMI should be cleared by root SMI handler.
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com>
[pbonzini@redhat.com: InitPaging: prepare PT before filling in PDE]
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18645 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:12:04 +0000 (19:12 +0000)]
UefiCpuPkg: Add ACPI CPU Data include file
Add AcpuCpuData.h that defines a data structure that is shared between
modules and is required for ACPI S3 support.
APState field removed between V1 and V2 patch.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18642 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:11:15 +0000 (19:11 +0000)]
UefiCpuPkg: Add SmmCpuPlatformHookLib
Add SmmCpuPlatformHookLib that provides platform specific functions
that are used to initialize SMM and process SMIs. A Null instance
of this library is provided that should work for most platforms.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18639 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:10:53 +0000 (19:10 +0000)]
UefiCpuPkg: Add SmmCpuFeaturesLib
Add SmmCpuFeaturesLib that provides CPU specific functions that are
used to initialize SMM and process SMIs. A functional implementation
of this library class is provided that is based on the
Intel(R) 64 and IA-32 Architectures Software Developer's Manual
[jeff.fan@intel.com: Fix code style issues reported by ECC]
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18638 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:10:32 +0000 (19:10 +0000)]
UefiCpuPkg: Add SecCore module and supporting library class and PCD
Add declaration of PlatformSecLib library class to DEC file
Add declaration of PcdPeiTemporaryRamStackSize PCD to DEC/UNI file
Add build of PlatformSecLibNull to DSC file
Add build of SecCore to DSC file
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18637 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:10:14 +0000 (19:10 +0000)]
UefiCpuPkg: Add SecCore module
Add SecCore module that uses the PlatformSecLib class for platform
specific actions. The SecCore module also uses a new PCD to
configure the size of the stack used in the SEC phase. If the
stack size PCD is set to 0, the stack is configured to use half
of the available temporary RAM.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18636 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:09:56 +0000 (19:09 +0000)]
UefiCpuPkg: Add PlatformSecLib
Add PlatformSecLib class and PlatformSecLibNull instance
that is used by the SecCore. PlatformSecLibNull should
not be used in a platform build. Instead, it should be
used as a template for implementing a platform specific
instance of the PlatformSecLib library class.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18635 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Mon, 19 Oct 2015 19:08:47 +0000 (19:08 +0000)]
UefiCpuPkg: CpuDxe: broadcast MTRR changes to APs
The Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuArchDxe
driver applies any MTRR changes to APs, if the
EFI_MP_SERVICES_PROTOCOL is available. We should do the same.
Additionally, the broadcast should occur at MP startup as well,
not only when MTRR settings are changed. The inspiration is
taken from
Quark_EDKII_v1.1.0/IA32FamilyCpuBasePkg/CpuMpDxe/
(see the EarlyMpInit() function and its call sites in
"ProcessorConfig.c").
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18632 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 19 Oct 2015 19:08:28 +0000 (19:08 +0000)]
UefiCpuPkg: CpuDxe: Wait for APs to enter idle loop
Address a race condition in first call to StartupAllAPs() with
SingleThread set to TRUE in the MP initialization. If the APs
have not entered their idle loop before StartupAllAPs() is called,
then some of the APs will be in an unexpected state, and
StartupAllAPs() will hang. This is the hang condition that is
only seen when SingleThread parameter is set to TRUE and
StartupAllAPs() is called very shortly after mAPsAlreadyInitFinished
is set to TRUE that releases the APs to complete their initialization.
An internal function has been added to check if all APs are in the
sleeping state in their idle loop. On the first call to
StartupAllAPs(), this internal function is used in a loop to make
sure the APs are in a state that is compatible with the use of
StartupAllAPs(). PcdCpuApInitTimeOutInMicroSeconds is used as the
maximum wait time for the APs to enter their idle loop. If all
APs have not entered their idle loop within the timeout, then
an ASSERT() is generated.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Cc: Jeff Fan <jeff.fan@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18631 6f19259b-4bc3-4df7-8a09-765794883524
Jeremy Linton [Mon, 19 Oct 2015 15:14:13 +0000 (15:14 +0000)]
Update the ACPI device information for ARM Juno.
These patches correct a number of problems with the JUNO ACPI tables.
First, put CCA attributes on the devices which can do DMA. This is
because the linux kernel now requires ARM64 devices specify a coherency
model. Without CCA the devices are unable to perform DMA.
Update the EHCI window to a full 64k as documented in the
Juno Platform SoC TRM. This makes it match the values used in some
other places.
Finally, add some _DSD entries for the SMSC ethernet chip.
The latter changes are required for the mainline kernels to use the adapter.
Star Zeng [Mon, 19 Oct 2015 06:41:28 +0000 (06:41 +0000)]
MdeModulePkg VarCheckLib: R18611 was thoughtless for property set
R18611 only updated the logic to return correct property
when no property set to variable with wildcard name.
But VariablePropertySet needs the pointer of property data for set.
So roll back the change in VariablePropertyGetWithWildcardName at R18611,
and check the property revision first in VariablePropertyGet and
SetVariableCheck before using the property data.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18626 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Fri, 16 Oct 2015 19:52:24 +0000 (19:52 +0000)]
OvmfPkg: VirtioBlkDxe: reset device at ExitBootServices()
(1) VirtioLib allocates the virtio ring in EfiBootServicesData memory.
(This is intentional.) Code that executes after ExitBootServices() is
permitted to reuse such memory.
(2) The hypervisor is allowed to look at, and act upon, a live virtio ring
at any time, even without explicit virtio kicks from the guest.
Should boot loader code or kernel code, running between ExitBootServices()
and the kernel's own virtio drivers resetting the device, overwrite the
pages that used to contain the virtio ring before ExitBootServices(), QEMU
could theoretically interpret that unrelated data as garbage ring
contents, and abort the guest.
Although we have seen no such reports, better be prudent and reset the
device in an ExitBootServices() event handler. Among other things, this
causes QEMU to forget about the device's virtio ring.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18624 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Fri, 16 Oct 2015 19:52:18 +0000 (19:52 +0000)]
OvmfPkg: VirtioScsiDxe: reset device at ExitBootServices()
(1) VirtioLib allocates the virtio ring in EfiBootServicesData memory.
(This is intentional.) Code that executes after ExitBootServices() is
permitted to reuse such memory.
(2) The hypervisor is allowed to look at, and act upon, a live virtio ring
at any time, even without explicit virtio kicks from the guest.
Should boot loader code or kernel code, running between ExitBootServices()
and the kernel's own virtio drivers resetting the device, overwrite the
pages that used to contain the virtio ring before ExitBootServices(), QEMU
could theoretically interpret that unrelated data as garbage ring
contents, and abort the guest.
Although we have seen no such reports, better be prudent and reset the
device in an ExitBootServices() event handler. Among other things, this
causes QEMU to forget about the device's virtio ring.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18623 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Fri, 16 Oct 2015 16:48:24 +0000 (16:48 +0000)]
OvmfPkg: Sec: Fix SOURCE_DEBUG_ENABLE ASSERT()
The update to the LocalApicLib instances to make sure the Local APIC is
initialized before use (SVN r18595 / git commit 6d72ff7d9daf) generates an
ASSERT() when SOURCE_DEBUG_ENABLE is enabled for OVMF.
The fix is to initialize the Local APIC Timer and mask it before
initializing the DebugAgent.
Laszlo Ersek [Fri, 16 Oct 2015 15:46:37 +0000 (15:46 +0000)]
MdeModulePkg: FaultTolerantWriteDxe: clean up some "success" messages
The "success" messages in FtwRestart(), FtwAbort(), and FtwGetLastWrite()
should be logged on EFI_D_INFO level. We can also unify their format with
the __FUNCTION__ macro.
Cc: Star Zeng <star.zeng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Drew Jones <drjones@redhat.com> Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18620 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Fri, 16 Oct 2015 15:46:32 +0000 (15:46 +0000)]
MdeModulePkg: FaultTolerantWriteDxe: mellow DEBUGs about workspace reinit
The IsValidWorkSpace() function checks if the working block header of the
workspace is valid. A mismatch detected by this function is not
necessarily an error; it can happen with an as-yet unwritten flash chip,
which is e.g. common and normal when a new ArmVirtQemu virtual machine is
booted. Therefore downgrade the message emitted by IsValidWorkSpace() from
EFI_D_ERROR to EFI_D_INFO, and change the wording from "error" to
"mismatch".
The only caller of IsValidWorkSpace(), InitFtwProtocol(), handles all of
the following cases:
(1) IsValidWorkSpace() succeeds for the working block -- this is normal
operation,
(2) IsValidWorkSpace() fails for the working block, but succeeds for the
spare block -- InitFtwProtocol() then restores the working block from
the spare block,
(3) IsValidWorkSpace() fails for both the working and spare blocks --
InitFtwProtocol() reinitializes the full workspace.
In cases (2) and (3), InitFtwProtocol() logs additional messages about the
branch taken. Their current level is EFI_D_ERROR, but the messages are
arguably informative, not necessarily error reports.
Downgrade these messages from EFI_D_ERROR to EFI_D_INFO, so that they
don't clutter the debug output when the PcdDebugPrintErrorLevel mask only
enables EFI_D_ERROR (i.e., in a "silent" build).
These messages have annoyed / confused users; see for example:
- https://bugzilla.redhat.com/show_bug.cgi?id=1270279
Cc: Star Zeng <star.zeng@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Drew Jones <drjones@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18619 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Fri, 16 Oct 2015 15:46:28 +0000 (15:46 +0000)]
ArmPlatformPkg: NorFlashDxe: mellow DEBUG messages about flash reinit
The ValidateFvHeader() function checks several conditions against the
firmware volume header. Failure of the first of these checks, reported as
"No Firmware Volume header present", is a common situation for unformatted
flash images, especially when a new virtual machine is created.
Similarly, "Variable Store Guid non-compatible" is common when the
firmware binary is switched from Secure Boot-incapable to Secure
Boot-capable, or vice versa.
The only caller of ValidateFvHeader(), NorFlashFvbInitialize(), handles
all these mismatches by installing a new FVB header. It also emits
another, loud ERROR message (which is even less justified when it is
triggered by (BootMode == BOOT_WITH_DEFAULT_SETTINGS)).
Downgrade these messages from EFI_D_ERROR to EFI_D_INFO, so that they
don't clutter the debug output when the PcdDebugPrintErrorLevel mask only
enables EFI_D_ERROR (i.e., in a "silent" build).
These messages have annoyed / confused users; see for example:
- https://bugzilla.redhat.com/show_bug.cgi?id=1270279
- http://thread.gmane.org/gmane.comp.bios.edk2.devel/2772/focus=2869
Mark Rutland [Fri, 16 Oct 2015 15:23:46 +0000 (15:23 +0000)]
ArmVirtPkg: include BaseStackCheckLib also for AARCH64
Some AArch64 toolchains also invoke the software stack checker
functions on certain code - so include BaseStackCheckLib for
AARCH64 as well as for ARM. Since this was the only difference
between [LibraryClasses.ARM] and [LibraryClasses.AARCH64],
merge the two into the existing [LibraryClasses.common].
At the same time, fix the grammar for the related comments.
Fu Siyuan [Fri, 16 Oct 2015 07:18:51 +0000 (07:18 +0000)]
NetworkPkg: reset DHCP child when leaving PXE LoadFile.
The DHCP4 can have only one configured child instance so we need to reset
the DHCP4 child when leaving PXE driver's LoadFile() function, otherwise the
other programs which also need to use DHCP4 (like HTTP boot) will be impacted.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Sriram Subramanian <sriram-s@hpe.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18616 6f19259b-4bc3-4df7-8a09-765794883524
Fu Siyuan [Fri, 16 Oct 2015 07:18:38 +0000 (07:18 +0000)]
MdeModulePkg: reset DHCP child when leaving PXE LoadFile.
The DHCP4 can have only one configured child instance so we need to reset
the DHCP4 child when leaving PXE driver's LoadFile() function, otherwise the
other programs which also need to use DHCP4 (like HTTP boot) will be impacted.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Sriram Subramanian <sriram-s@hpe.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18615 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng [Fri, 16 Oct 2015 01:46:19 +0000 (01:46 +0000)]
SecurityPkg: Use PcdSet##S to instead of PcdSet##
PcdSet## has no error status returned, then the caller has no idea about whether the set operation is successful or not.
PcdSet##S were added to return error status and PcdSet## APIs were put in ifndef DISABLE_NEW_DEPRECATED_INTERFACES condition.
To adopt PcdSet##S and further code development with DISABLE_NEW_DEPRECATED_INTERFACES defined, we need to Replace PcdSet## usage with PcdSet##S.
Normally, DynamicDefault PCD set is expected to be success, but DynamicHii PCD set failure is a legal case.
PcdTpmInitializationPolicy/PcdTcg2HashAlgorithmBitmap/PcdTpm2HashMask/PcdTpmInstanceGuid all have set operation in PEI phase,
PEI phase does not allow DynamicHii PCD set, so DynamicDefault is expected for them and use PcdSet##S to instead of PcdSet## and assert when set failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18614 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng [Fri, 16 Oct 2015 01:31:56 +0000 (01:31 +0000)]
MdeModulepkg VarCheckLib: Return NULL when no property set
to variable with wildcard name.
VarCheckLib has zeroed property for variable with wildcard name
and is waiting for property set. The code should return NULL
when no property set to variable with wildcard name, but not
return the zeroed property that will impact the functionality of
SetVariableCheck.
The issue does not appear with VarCheckUefiLib linked as the library
just has the expected property set.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@18611 6f19259b-4bc3-4df7-8a09-765794883524
projects / mirror_edk2.git / log