vanjeff [Fri, 25 Jan 2013 02:36:18 +0000 (02:36 +0000)]
This revision can only work with Intel(c) UDK Debugger Tool version 1.3 or greater. Detailed change log is as below:
1. Add DebugAgentPei driver to initialize Debug Agent in PEI phase.
Add DebugAgentDxe driver to initialize Debug Agent in DXE phase.
DebugAgentDxe driver could be loaded and unloaded in shell.
2. Update the SourceLevelDebugPkg so that the debug agent can be initialized in any phase: SEC, PEI or DXE.
3. Add an enhanced retry algorithm that provides a robust connection when data loss happens in the debug channel.
4. Clear DR7 register in exception handler.
5. Set the default serial port parameter to 0 instead of PCDs.
6. Build pointer of Mailbox in HOB instead of Mailbox itself, since HOB may be moved at DXE entry point function.
7. Raise TPL to prevent recursion from EFI timer interrupts in SerialIo.c.
8. Add one spin lock for accessing Mailbox when MP debugging supported.
9. Use more non-NULL library instances in SourceLevelDebugPkg DSC file, thus DebugAgentDxe.efi built from SourceLevelDebugPkg could work in shell.
10.Separate all operations about IDT table entry from SecDebugAgentLib.c into DebugAgent\DebugAgentCommon's arch sub-directory.
11.Enhance Debug Agent to avoid breaking by hardware SMI during DXE debugging phase.
12.Add supporting on mode switch code debugging.
13.Remove reset Host Controller operation in DebugCommunicationLibUsb.c to avoid impacting EDKII usb stack.
14.Fix debug timer interrupt missing issue after back from legacy code.
Signed-off-by: Jeff Fan <jeff.fan@intel.com> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Signed-off-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14083 6f19259b-4bc3-4df7-8a09-765794883524
andrewfish [Wed, 23 Jan 2013 00:21:57 +0000 (00:21 +0000)]
Fix xcode tool chain assembly issue.
Contributed-under: TianoCore Contribution Agrement 1.0 Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
signed-off-by: Andrew Fish <afish@apple.com>
li-elvin [Tue, 22 Jan 2013 06:37:06 +0000 (06:37 +0000)]
Take the highest horizontal resolution as highest video resolution.
Signed-off-by: Li Elvin <elvin.li@intel.com> Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com> Reviewed-by: Tian Hot <hot.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14075 6f19259b-4bc3-4df7-8a09-765794883524
li-elvin [Tue, 22 Jan 2013 06:35:57 +0000 (06:35 +0000)]
Take the highest horizontal resolution as highest video resolution.
Signed-off-by: Li Elvin <elvin.li@intel.com> Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com> Reviewed-by: Tian Hot <hot.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14074 6f19259b-4bc3-4df7-8a09-765794883524
darylm503 [Fri, 18 Jan 2013 20:36:27 +0000 (20:36 +0000)]
AppPkg/Applications/Python: Add support for the pyexpat module.
Add required flags to [BuildOptions] in PythonCore.inf.
Add initialization routine to Efi/config.c.
Alter #include targets if building for UEFI in expat_external.h and xmlparse.c.
Add expat modifications to PyMod-2.7.2/Modules/expat.
lzeng14 [Fri, 18 Jan 2013 01:12:32 +0000 (01:12 +0000)]
1. Update the logic of UpdateVariable() for updating variable from:
set old variable to IN_DELETED_TRANSITION -> check if reclaim is needed(If yes, do reclaim) -> add new variable -> set old variable to DELETED if no reclaim happened.
to:
set old variable to IN_DELETED_TRANSITION -> check if reclaim is needed(If yes, do reclaim) -> add new variable -> set old variable to DELETED.
2. Update UpdateVariable() to correctly handle the case "both ADDED and IN_DELETED_TRANSITION variable are present", and delete both old ADDED and IN_DELETED_TRANSITION variable when deleting or updating variable.
3. Update VariableServiceGetNextVariableName() to return the valid IN_DELETED_TRANSITION variable if only IN_DELETED_TRANSITION variable is present.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14065 6f19259b-4bc3-4df7-8a09-765794883524
darylm503 [Wed, 16 Jan 2013 23:45:54 +0000 (23:45 +0000)]
StdLib: Correct two instances of mismatch between function declaration and definition causing GCC compile errors.
StdLib\Include\Containers\Fifo.h
Change return type of cFIFO_Truncate to size_t. Makes declaration match definition.
Update comment to describe what is returned.
StdLib\LibC\Uefi\InteractiveIO\IIOutilities.c
Change return type of IIO_CursorDelta to int. Makes declaration match definition.
Change other types from INT32 to int, for consistency.
Update comment for returned values.
darylm503 [Wed, 16 Jan 2013 23:45:13 +0000 (23:45 +0000)]
AppPkg/Applications/Main/Main.c: Remove EFIAPI from the definition of the main() function.
The main() function should not be declared as EFIAPI. To do so conflicts with the C specification and does not match the internal declaration of main().
jljusten [Wed, 16 Jan 2013 06:50:35 +0000 (06:50 +0000)]
OvmfPkg: Fix Xcode assembly issue
The Xcode assembler is much pickier than GCC. Also the 64-bit
linker is not a fan of relocations so it is better to us IP
relative code, but at least it removes a relocation entry.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Andrew Fish <afish@apple.com>
[jordan.l.justen@intel.com: use .byte for retfq rather than lret] Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14055 6f19259b-4bc3-4df7-8a09-765794883524
jljusten [Wed, 16 Jan 2013 06:49:45 +0000 (06:49 +0000)]
OvmfPkg: LoadLinuxLib: Zero kernel parameters instead of passing garbage
We're supposed to zero everything in the kernel bootparams that we don't
explicitly initialise, other than the setup_header from 0x1f1 onwards
for a precisely defined length, which is copied from the bzImage.
We're *not* supposed to just pass the garbage that we happened to find
in the bzImage file surrounding the setup_header.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14052 6f19259b-4bc3-4df7-8a09-765794883524
lzeng14 [Tue, 15 Jan 2013 05:18:19 +0000 (05:18 +0000)]
The unit of Duration for S3BootScriptSaveMemPoll() is us, but not ns, so update BootScriptExecuteMemPoll() to use MicroSecondDelay() instead of NanoSecondDelay(), and update BootScriptWriteMemPoll() to use S3BootScriptSaveMemPoll() correctly with possible minimum deviation.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14048 6f19259b-4bc3-4df7-8a09-765794883524
tye1 [Tue, 15 Jan 2013 02:19:42 +0000 (02:19 +0000)]
Update IPv6 configuration UI: 1) keep addresses blank when enter ‘Advanced Configuration’ page; 2) Save parameters in ‘Advanced Configuration’ immediately when user press ‘Commit Changes and Exit’ .
Signed-off-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14047 6f19259b-4bc3-4df7-8a09-765794883524
jljusten [Mon, 14 Jan 2013 03:10:57 +0000 (03:10 +0000)]
OvmfPkg: LoadLinuxLib: Fix kernel entry for 64-bit OVMF
We currently just jump to offset 0x200 in the kernel image, in 64-bit
mode. This is completely broken. If it's a 32-bit kernel, we'll be
jumping into the compressed data payload.
If it's a 64-bit kernel, it'll work... but the 0x200 offset is
explicitly marked as 'may change in the future', has already changed
from 0x100 to 0x200 in the past with no fanfare, and bootloaders are
instructed that they should look at the ELF header to find the offset.
So although it does actually work today, it's still broken in the
"someone needs to whipped for doing it this way" sense of the word.
In fact, the same bug exists in other bootloaders so the 0x200 offset
probably *is* now set in stone. But still it's only valid to use it if
we *know* it's a 64-bit kernel. And we don't. There *is* no ELF header
that we can look at when we're booting a bzImage, and we can't rely on
it having a PE/COFF header either.
The 32-bit entry point is always guaranteed to work, and we need to
support it anyway. So let's just *always* use it, in 32-bit mode, and
then we don't have to make up some horrible heuristics for detecting
32-bit vs. 64-bit kernels.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14045 6f19259b-4bc3-4df7-8a09-765794883524
sfu5 [Wed, 9 Jan 2013 05:19:43 +0000 (05:19 +0000)]
1. Set the secure boot state to Standard Mode when user leaving secure boot setup page.
2. Add “Current SecureBoot State” field to reflect current secure boot status of the platform.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Dong Guo <guo.dong@intel.com> Reviewed-by: Yao Jiewen <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14042 6f19259b-4bc3-4df7-8a09-765794883524
sfu5 [Tue, 8 Jan 2013 08:28:11 +0000 (08:28 +0000)]
Fix several RFC compliance issues in DHCP6 driver as below.
1. Client must ignore any Advertise message that includes a Status Code option containing the value NoAddrsAvail.
2. The elapsed-time should start from the current DHCP transaction.
3. Client should not change any information about addresses the client has recorded in the IA but not included in the IA from the server.
4. Client need to update to handle the error status code UnspecFail/UseMulticast/NotOnLink/NoBinding in the Reply message from server.
5. When the client receives a Reply message in response to a Renew/ Rebind message, the client examines each IA independently. For each IA in the original Renew/ Rebind message, the client sends a Renew/ Rebind if the IA is not in the Reply message.
6. Client should uses network byte order in IANA T1/T2 option
7. Client should discard any addresses for which the preferred lifetime is greater than the valid lifetime.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14039 6f19259b-4bc3-4df7-8a09-765794883524
li-elvin [Mon, 7 Jan 2013 07:12:19 +0000 (07:12 +0000)]
Current Thunk16.asm implementation clears reserved bits, which does not follow IA32 SDM. Now the fix is to only clear PAE and PSE bit of CR4 for real mode.
lzeng14 [Fri, 4 Jan 2013 12:21:59 +0000 (12:21 +0000)]
1. Don't assume that flush the HOB variable to flash must be successful.
2. When no DELETED variable found, no variable space could be reclaimed, so just give some debug info and return EFI_SUCCESS.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14029 6f19259b-4bc3-4df7-8a09-765794883524
erictian [Fri, 4 Jan 2013 06:03:52 +0000 (06:03 +0000)]
MdeModulePkg/AtaBus&ScsiBus: Dynamically calculate how long shall we wait for the finish of a read/write operation according to the actual transfer length
li-elvin [Tue, 25 Dec 2012 08:21:01 +0000 (08:21 +0000)]
Set graphic mode if graphic mode is not same with the one which GraphicsConsole driver find by itself.
Signed-off-by: Li Elvin <elvin.li@intel.com> Reviewed-by: Ni Ruiyu <ruiyu.ni@intel.com> Reviewed-by: Tian Hot <hot.tian@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14023 6f19259b-4bc3-4df7-8a09-765794883524
lgao4 [Tue, 25 Dec 2012 02:29:46 +0000 (02:29 +0000)]
Add ASSERT() for BitField operations to make sure the input value is valid. Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Kinney, Michael D <Michael.D.Kinney@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14020 6f19259b-4bc3-4df7-8a09-765794883524
lgao4 [Tue, 25 Dec 2012 02:25:50 +0000 (02:25 +0000)]
Add ASSERT() for BitField operations to make sure the input value is valid. Signed-off-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Kinney, Michael D <Michael.D.Kinney@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14019 6f19259b-4bc3-4df7-8a09-765794883524
lzeng14 [Mon, 24 Dec 2012 06:58:13 +0000 (06:58 +0000)]
Detect some unsupported cases when save boot script, then return error early.
1. PciCfg Read/Write doesn't support UINT64 width.
2. PciCfg2 Segment must be zero.
Move CheckParameters () to BootScriptSave.c to check parameter early.
Add code for EfiSmbusBWBRProcessCall operation, and let the SmbusLib instance to decide if it is supported or not.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@14018 6f19259b-4bc3-4df7-8a09-765794883524
darylm503 [Fri, 21 Dec 2012 18:19:41 +0000 (18:19 +0000)]
StdLib: Fix issue with Canonical output expansion of NL to CR NL and similar expansions.
SysCalls.c: Add IGNSPEC to the "sane" termios settings so that, by default, function keys and other special keys are ignored.
fvwrite.c:
Line 109: Change test to less-than zero since zero is a valid value.
Line 113: Change test to greater-than zero since we only want to loop when there are characters available.
Line 114: Force uio_resid to zero since it might have become negative on line 113.
lzeng14 [Fri, 21 Dec 2012 00:52:57 +0000 (00:52 +0000)]
Initialize a local work space header to be used by IsValidWorkSpace() and InitWorkSpaceHeader() to avoid executing code(gBS->CalculateCrc32 ()) outside SMRAM while inside SMM.
This patch adds two things. First it allows QEMU to distinguish
between regular powerdown and S4 powerdown. Later separate QMP
notification will be added for S4 powerdown. Second it allows
S3/S4 states to be disabled from QEMU command line. Some guests
known to be broken with regards to power management, but allow to
use it anyway. Using new properties management will be able to
disable S3/S4 for such guests.
Supported system state are passed to a firmware using new fw_cfg
file. The file contains 6 byte array. Each byte represents one
system state. If byte at offset X has its MSB set it means that
system state X is supported and to enter it guest should use the
value from lowest 3 bits.
jljusten [Mon, 17 Dec 2012 02:13:00 +0000 (02:13 +0000)]
OvmfPkg: report S3 state in DSDT
The ACPI 5.0 specification says:
7.3.4.4 System \_S3 State
[...]
* Dynamic RAM context is maintained.
[...]
This corresponds to the following in the PIIX4 spec:
PMCNTRL -- POWER MANAGEMENT CONTROL REGISTER (IO)
[...]
Bits[12:10] Suspend Type
[...]
001 STR (Suspend To RAM)
Also, this (ie. decimal 1) is the suspend type value that qemu recognizes
as an S3 (suspend to ram) request.
Only the value for PM1a_CNT.SLP_TYP is set (PM1b_CNT.SLP_TYP is left at
zero), since in OVMF we don't report the optional PM1b_EVT_BLK register
block to OSPM. (PM1b_EVT_BLK is defined as 0 in "Platform.h"; see "4.8.1.1
PM1 Event Registers" in the ACPI 5.0 specification.)
jljusten [Mon, 17 Dec 2012 02:12:44 +0000 (02:12 +0000)]
OvmfPkg: fix PIIX4 SUS_TYP value in \_S4 package
The ACPI 5.0 specification says:
7.3.4.5 System \_S4 State
[...]
* DRAM context is not maintained.
[...]
This corresponds to the following in the PIIX4 spec:
PMCNTRL -- POWER MANAGEMENT CONTROL REGISTER (IO)
[...]
Bits[12:10] Suspend Type
[...]
010 POSCL (Powered On Suspend, Context Lost)
Also, this (ie. decimal 2) is the default suspend type value that qemu
recognizes as an S4 (suspend to disk) request.
Only the value for PM1a_CNT.SLP_TYP is corrected (PM1b_CNT.SLP_TYP is left
at zero), since in OVMF we don't report the optional PM1b_EVT_BLK register
block to OSPM. (PM1b_EVT_BLK is defined as 0 in "Platform.h"; see "4.8.1.1
PM1 Event Registers" in the ACPI 5.0 specification.)
sfu5 [Thu, 13 Dec 2012 06:47:06 +0000 (06:47 +0000)]
1. Add EFI_COMPONENT_NAME2_PROTOCOL.GetControllerName() support.
2. Fix the driver binding Stop() hang issue in the network stack.
3. Add Ip4 raw data support.
4. Add iSCSI Dhcp option 60 support.
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Ouyang Qian <qian.ouyang@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13995 6f19259b-4bc3-4df7-8a09-765794883524
li-elvin [Wed, 12 Dec 2012 08:25:05 +0000 (08:25 +0000)]
Update PCD description.
Signed-off-by: Li Elvin <elvin.li@intel.com> Reviewed-by: Fan Jeff <jeff.fan@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13992 6f19259b-4bc3-4df7-8a09-765794883524
darylm503 [Tue, 11 Dec 2012 21:19:14 +0000 (21:19 +0000)]
StdLib: Add terminal type line editing (Interactive IO) for console devices.
Adds a subset of the terminal I/O capabilities described in the Single Unix Specification, V4.
Supports:
Erase previous character. Default is Backspace or ^H
Erase line. Default is ^U
TAB characters are supported and, by default, are rendered as 8 spaces. They will still be read as a single TAB character.
Both Canonical and Non-Canonical modes are supported.
If a terminal device is opened with O_TTY_INIT in the mode, the device will be initialized to "sane" values for interactive use. It will be in Canonical mode, Enter will be translated to NewLine and on output, a NewLine is translated to CRLF. Echoing will be on, control characters are output as ^X, and TABs are expanded.
See the new <sys/termios.h> file for more information.
lzeng14 [Mon, 10 Dec 2012 12:54:02 +0000 (12:54 +0000)]
1. Update IoRead to support UINT64 also.
2. To be consistent, update PciCfgRead to support full S3BootScriptWidth(Uint8, FifoUint8 and FullUint8) like PciCfgWrite.
3. Use BuildLoopData() to get the addressStride and BufferStride to do PCI CFG operations.
4. Correct, refine and enhance some comments and debug messages.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13987 6f19259b-4bc3-4df7-8a09-765794883524
lzeng14 [Fri, 7 Dec 2012 07:56:59 +0000 (07:56 +0000)]
1. Duplicate the original boot script data copy, because it may have INSERT boot script at runtime in SMM. If so, we should use original copy to restore data after OS rewrites the ACPINvs region. Or the data inserted may cause some original boot script data lost.
2. Sync the change into LockBox for S3BootScriptMoveLastOpcode() at runtime in SMM.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13986 6f19259b-4bc3-4df7-8a09-765794883524
lzeng14 [Thu, 6 Dec 2012 01:15:40 +0000 (01:15 +0000)]
Multi-SMM drivers couldn't save their boot script successfully all at runtime in SMM, one module's boot script will overwrite another module's.
Allocate a SMM copy for private data structure, and use a new PCD PcdS3BootScriptTablePrivateSmmDataPtr to transfer and share data between multi-SMM drivers.
Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13984 6f19259b-4bc3-4df7-8a09-765794883524
jyao1 [Mon, 3 Dec 2012 01:06:28 +0000 (01:06 +0000)]
Fix build error.
ACPI4.0/5.0 have clear description:
FIRMWARE_CTRL: If the X_FIRMWARE_CTRL field contains a non zero value then this field must be zero.
X_FIRMWARE_CTRL: This field is used when the physical address of the FACS is above 4GB. If the FIRMWARE_CTRL field contains a non zero value then this field must be zero.
Update code in AcpiSupport/AcpiTable when it produces this field to set one only.
Update code in AcpiS3Save when it consumes this field, check 0 value.
jyao1 [Fri, 30 Nov 2012 09:03:15 +0000 (09:03 +0000)]
ACPI4.0/5.0 have clear description:
FIRMWARE_CTRL: If the X_FIRMWARE_CTRL field contains a non zero value then this field must be zero.
X_FIRMWARE_CTRL: This field is used when the physical address of the FACS is above 4GB. If the FIRMWARE_CTRL field contains a non zero value then this field must be zero.
Update code in AcpiSupport/AcpiTable when it produces this field to set one only.
Update code in AcpiS3Save when it consumes this field, check 0 value.
projects / mirror_edk2.git / log