IntelSiliconPkg/IntelSiliconPkg.dec: drop bogus semicolon from GUID def

The DEC spec doesn't allow the trailing semicolon:

  2.6 [Guids] Usage

  GuidCName = {C Format Guid Value} # Comment

Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>

UefiCpuPkg/MpInitLib: support 64-bit AP stack addresses

The cached "CPU_INFO_IN_HOB.ApTopOfStack" field currently has type UINT32.
This is not ideal because the AP stacks are located within
"CpuMpData->Buffer", which is allocated with a plain AllocatePages() call
in MpInitLibInitialize():

  platform  CpuMpPei included  PEI RAM > 4GB  result
  --------  -----------------  -------------  ------
  Ia32      *                  n/a            good
  Ia32X64   no                 n/a            BAD
  Ia32X64   yes                n/a            good
  X64       no                 *              BAD
  X64       yes                no             good
  X64       yes                yes            BAD

- If we are on an Ia32X64 or X64 platform that does not include CpuMpPei,
  then CpuDxe cannot reuse the CPU_INFO_IN_HOB structures preallocated by
  CpuMpPei (through the CpuInitMpLib GUID HOB), and then AllocatePages()
  -- invoked first in 64-bit DXE -- could return an address outside of
  32-bit address space.

- If we are on an X64 platform where the permanent PEI RAM extends above
  the 32-bit address space, then the same issue can surface even if
  CpuMpPei is included: even the original allocation of the
  CPU_INFO_IN_HOB structures, by CpuMpPei, could be satisfied from above
  4GB.

The original "AP init" branch in "X64/MpFuncs.nasm" correctly considers a
64-bit stack start: the "MP_CPU_EXCHANGE_INFO.StackStart" field has type
UINTN, and the code uses QWORD addition and movement to set RSP from it.

Adapt the "GetApicId" branch of "X64/MpFuncs.nasm":

- change the type of "CPU_INFO_IN_HOB.ApTopOfStack" to UINT64,

- remove the explicit truncation to UINT32 in InitializeApData(),

- update the "GetNextProcNumber" iteration size to the new size of
  "CPU_INFO_IN_HOB",

- set RSP with a QWORD movement from "CPU_INFO_IN_HOB.ApTopOfStack".

Because the same CPU_INFO_IN_HOB structure is used by "Ia32/MpFuncs.nasm",
we have to update the "GetNextProcNumber" iteration size there as well.
The ESP setting can be preserved as a DWORD movement from the original
offset (decimal 12), since our integers are little endian.

Cc: Jeff Fan <jeff.fan@intel.com>
Fixes: 845c5be1fd9bf7edfac4a103dfab70829686978f
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>

UefiCpuPkg/MpInitLib/X64/MpFuncs.nasm: fix fatal typo

The recent patch "UefiCpuPkg/MpInitLib: Program AP stack in fixed address"
inadvertently broke the first startup of APs during X64 PEI, because in
the TestLock section of the code, it replaced the access to the
NumApsExecuting counter with an access to the unrelated InitFlag field.

Cc: Jeff Fan <jeff.fan@intel.com>
Fixes: 845c5be1fd9bf7edfac4a103dfab70829686978f
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>

UefiCpuPkg/MpInitLib/X64/MpFuncs.nasm: remove superfluous instruction

At this point, ESI still has the value from EBX.

Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>

UefiCpuPkg/DxeMpInitLib: remove duplicate HobLib class dependency

Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>

MdeModulePkg/Include: Add PiSmmMemoryAttributesTable.h

This table describes the SMM memory attributes.

The new GUID gEdkiiPiSmmMemoryAttributesTableGuid and its associated
structure are based on the EFI_MEMORY_ATTRIBUTES_TABLE and GUID from the
UEFI Specification.

Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: update commit message as requested by Michael Kinney]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>

MdeModulePkg HiiDatabase: Remove extra memory initialization.

The memory will be set to background color after success allocate
the data, so not need to call AllocateZeroPool.

Related bugz: https://bugzilla.tianocore.org/show_bug.cgi?id=223

Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

QuarkPlatformPkg/dsc: enable Smm paging protection.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

UefiCpuPkg/PiSmmCpuDxeSmm: Add paging protection.

PiSmmCpuDxeSmm consumes SmmAttributesTable and setup page table:
1) Code region is marked as read-only and Data region is non-executable,
if the PE image is 4K aligned.
2) Important data structure is set to RO, such as GDT/IDT.
3) SmmSaveState is set to non-executable,
and SmmEntrypoint is set to read-only.
4) If static page is supported, page table is read-only.

We use page table to protect other components, and itself.

If we use dynamic paging, we can still provide *partial* protection.
And hope page table is not modified by other components.

The XD enabling code is moved to SmiEntry to let NX take effect.

Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

UefiCpuPkg/dec: Add PcdCpuSmmStaticPageTable.

If enabled, SMM will not use on-demand paging.
SMM will build static page table for all memory.

The page table size depend on 2 things:
1) The 1G paging capability.
2) The whole system memory/MMIO addressing capability.

A) If the system only supports 2M paging,
When the whole memory/MMIO is 32bit, we only need 1+1+4=6 pages for 4G.
When the whole memory/MMIO is 39bit, we need 1+1+256 pages (~ 1M)
When the whole memory/MMIO is 48bit, we need 1+256+256*256 pages (~ 257M)

B) If the system supports 1G paging.
When the whole memory/MMIO is 32bit, we only need 1+1+4=6 pages for 4G.
(We still generate 2M page for maintenance consideration.)
When the whole memory/MMIO is 39bit, we still need 6 pages.
(We setup 1G paging for >1G.)
When the whole memory/MMIO is 48bit, we need 1+256 pages (~ 1M).

Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

MdeModulePkg/PiSmmCore: Add MemoryAttributes support.

The SMM memory attribute table concept is similar to UEFI
memory attribute table.

The new file MdeModulePkg/Core/PiSmmCore/MemoryAttributesTable.c
and the new code in MdeModulePkg/Core/PiSmmCore/Page.c
are based on the algorithms and implementation from
MdeModulePkg/Core/Dxe/Misc/MemoryAttributesTable.c
and MdeModulePkg/Core/Dxe/Mem/Page.c.

These new components are based on the Memory Attributes Table
feature from the UEFI Specification and the existing DXE Core
implementation that supports that feature.

This SMM MemoryAttributes table is produced at SmmEndOfDxe event.
So that the consumer (PiSmmCpu) may consult this table
to set memory attribute in page table.

This patch also installs LoadedImage protocol to SMM
protocol database, so that the SMM image info can be
got easily to construct the PiSmmMemoryAttributes table.

Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

MdeModulePkg/dec: Add gEdkiiPiSmmMemoryAttributesTableGuid.

This table describes the SMM memory attributes.

Cc: Jeff Fan <jeff.fan@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

ArmVirtPkg DxeHobLib: Update func header description of BuildFv(2)Hob()

Update the function header description of BuildFv(2)Hob() to match
with HobLib.h in MdePkg.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=205

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>

IntelFrameworkPkg PeiHobLib: Check FV alignment when building FV HOB

If the FvImage buffer is not at its required alignment, then ASSERT().
Also update the function header description of BuildFv(2)Hob()
correspondingly.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=205

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdePkg HobLib: Check FV alignment when building FV HOB

If the FvImage buffer is not at its required alignment, then ASSERT().
Also update the function header description of BuildFv(2)Hob()
correspondingly.

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=205

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>

MdeModulePkg DxeCore: Show error message on unaligned FvImage issue

Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=205

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>

MdeModulePkg/Ip4Dxe: Correct the return status

This patch made the following change:
* DataItem->Status should be updated to the status code.
* Data should not be freed if EFI_NOT_READY returned.

Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

MdeModulePkg/Ip4Dxe: Add wrong/invalid subnet check

v2:
* Separate out the return status fix.
* Replace IP4_MASK_MAX with IP4_MASK_NUM.
* Remove the ON_EXIT label.

This patch is used to add the wrong/invalid subnet check.

Cc: Santhapur Naveen <naveens@amiindia.co.in>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

OvmfPkg AcpiTables: Use PcdDebugIoPort to describe QEMU debug console

Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

MdePkg/BaseLib: Add one wrapper on RdRand access for parameter check.

Add one wrapper implementation over assembly RdRand access to check
possible NULL parameter, for better alignment with comment description.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

UefiCpuPkg/MpInitLib: Update AP information when BSP switched

When BSP switched, we need to update some AP information. For example,
ApStartupSignalBuffer and ApTopOfStack.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg/MpInitLib: Program AP stack in fixed address

Currently, MpInitLib will program AP stack in dynamic address. Each processor
will calculate its stack address by adding stack size based on the last stack
address. That means AP may have the different stack address everytime it is
wakeup by INIT-SIPI-SIPI.

When all APs have wakeup to execute AP task, each each has been assigned one
stack address. Once the timeout happened on some of APs, BSP will send INIT-
SIPI-SIPI to wake up APs. We need to re-assign stack for APs. Based on the
current implementation, we might assign one stack address used by other APs.
It will cause the unexpected stack overlapped issue.

This fix changed the stack assignment policy. We will record the stack address
assigned to AP at first time AP wakeup. When AP failed on AP task, BSP could
reassigned the same stack for it.

Getting initial APIC ID in assembly code could help AP to get saved its stack
address.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg/MpInitLib: Add InitFlag and CpuInfo in MP_CPU_EXCHANGE_INFO

Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg/MpInitLib: Remove CPU information from CPU_AP_DATA

Some CPU information (InitialApicId/ApicId/Health) are duplicated in CPU_AP_DATA
and CPU_INFO_IN_HOB.

This update is to remove the ones from CPU_AP_DATA and update MpInitLib to
consume the ones from CPU_INFO_IN_HOB.

V2:
  Fixed potential un-initialized variable issue.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg/MpInitLib: Force sending INIT-SIPI-SIPI to reset APs

If BSP found APs timeout happened when AP executing AP task, BSP will reset APs
by WakeUpAP(). However, if ApLoopMode is ApMwaitLoop or ApRunLoop, WakeUpAp()
will try to write semaphore in memory to wake up AP. It cannot wake up APs
actually if APs still executing AP task.

This fix is to set ApInitReconfig flag to force BSP to send INIT-SIPI-SIPI to
wake up APs.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg/MpInitLib: Fixed offset error on Cr3Location

Cr3Location offset value should be 0x34 not 0x3C.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg/PiSmmCpuDxeSmm: Free SmramRanges to save SMM space

Cc: Zeng Star <star.zeng@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Zeng Star <star.zeng@intel.com>

ShellPkg: #ifndef of header files should have postfix underscore

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>

ShellPkg/dmpstore: Support "-sfo"

The patch adds the "-sfo" support to "dmpstore" command.

When -l or -d is specified, -sfo is not supported.

When the variable specified by name and GUID cannot be found,
an error message is displayed; Otherwise, the SFO is displayed.
E.g.: "dmpstore -guid GuidThatDoesntExist -sfo" produces output
as:
ShellCommand,"dmpstore"
VariableInfo,"","GuidThatDoesntExist","","",""

"dmpstore NameThatDoesntExist -guid GuidThatDoesntExist -sfo"
produces output as:
ShellCommand,"dmpstore"
dmpstore: No matching variables found. Guid GuidThatDoesntExist, Name
NameThatDoesntExist

The difference between the above 2 cases is that former one only
specifies the GUID, but the latter one specifies both name and GUID.
Since not specifying GUID means to use GlobalVariableGuid,
"dmpstore NameThatDoesntExist -sfo" produces the similar output as
latter one.
I personally prefer to always produce SFO output for both cases.
But the above behavior is the discussion result between HPE engineers.

Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Tapan Shah <tapandshah@hpe.com>

BaseTools tools_def.txt: Include AutoGen.h in GCC ASLPP_FLAGS

https://bugzilla.tianocore.org/show_bug.cgi?id=227
Refer to VS ASLPP_FLAGS, force include AutoGen.h so that ASL code
can use FixedPcdGetXX to get FixedPcd value.

Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>

BaseTools tools_def.txt: Remove -P option in GCC ASLPP_FLAGS

https://bugzilla.tianocore.org/show_bug.cgi?id=227

After -P option is removed, the generated preprocessed ASL file will have
line markers. The extra information can be removed by Trim script. ASL code
can refer to the definition in C source file. This has been supported in
VS and XCODE tool chains.

Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>

ArmPkg/Library/ArmDmaLib: Deallocate Map buffer in case of error

The patch is fixing memory leak in case of errors.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
Tested-by; Ryan Harkin <ryan.harkin@linaro.org>

Style fixes: use goto for error handling, whitespace fixes

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

SecurityPkg: Fix typos in comments

This patch fixes the following typos:

- intialized -> initialized
- TURE -> TRUE
- successull -> successfully
- hanlder -> handler
- funciton -> function
- Seperator -> Separator
- Sumbit -> Submit

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>

SecurityPkg: Fix typos in comments

This patch fixes the following typos:
- intialized -> initialized
- TURE -> TRUE
- successull -> successfully
- hanlder -> handler
- funciton -> function
- Seperator -> Separator
- Sumbit -> Submit
Also convert EFI_D_ERROR to DEBUG_ERROR for some debug messages.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>

MdeModulePkg/CapsuleApp: remove unused definition.

remove EFI_CAPSULE_FROM_FILE_DIR
remove EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED.
no one uses them.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

ShellPkg: Fix typos in comments and variables

- funciton -> function
- paramter -> parameter
- supresses -> suppresses
- Seperator -> Separator
- permenant -> permanent

Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>

OptionRomPkg: Fix typos in comments

- stoping -> stopping
- Sumbit -> Submit
- pionter -> pointer

Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>

Nt32Pkg: Fix typos in comments and variables

- discontiguous -> discontinuous
- reloaced -> relocated
- supresses -> suppresses
- debuging -> debugging
- suported -> supported
- availble -> available
- environmemt -> environment
- Seperator -> Separator
- remmeber -> remember
- interperted -> interpreted
- the a new -> the new
- initailized -> initialized
- attribue -> attribute
- boundry -> boundary
- nto -> not
- permenent -> permanent
- immediatly -> immediately
- excuted -> executed

Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>

DuetPkg: Fix typos in comments

- TURE -> TRUE
- successull -> successfully
- Libary -> Library
- Incude -> Include
- futhure -> future
- Predfined -> Predefined
- minimue -> minimum
- predeined -> predefined
- excute -> execute
- dirver -> driver
- hanlde -> handle
- boundry -> boundary

Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>

BaseTools: FILE DATA to support relative path under Multiple workspace

Fix the bug that FILE DATA to support relative path under Multiple
workspace.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

BaseTools: Fix the bug to support generate FFS by Align=Auto

FDF spec support to use 'Auto' as <FfsAlignmentValues>, but current Tool
report error about -a=Auto is invalid option when we set Align=Auto for
RAW File.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

UefiCpuPkg/PiSmmCpuDxeSmm: Decrease mNumberToFinish in AP safe code

We will put APs into hlt-loop in safe code. But we decrease mNumberToFinish
before APs enter into the safe code. Paolo pointed out this gap.

This patch is to move mNumberToFinish decreasing to the safe code. It could
make sure BSP could wait for all APs are running in safe code.

https://bugzilla.tianocore.org/show_bug.cgi?id=216

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>

UefiCpuPkg/PiSmmCpuDxeSmm: Place AP to 32bit protected mode on S3 path

On S3 path, we may transfer to long mode (if DXE is long mode) to restore CPU
contexts with CR3 = SmmS3Cr3 (in SMM). AP will execute hlt-loop after CPU
contexts restoration. Once one NMI or SMI happens, APs may exit from hlt state
and execute the instruction after HLT instruction. If APs are running on long
mode, page table is required to fetch the instruction. However, CR3 pointer to
page table in SMM. APs will crash.

This fix is to disable long mode on APs and transfer to 32bit protected mode to
execute hlt-loop. Then CR3 and page table will no longer be required.

https://bugzilla.tianocore.org/show_bug.cgi?id=216

Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Paolo Bonzini <pbonzini@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>

UefiCpuPkg/PiSmmCpuDxeSmm: Put AP into safe hlt-loop code on S3 path

On S3 path, we will wake up APs to restore CPU context in PiSmmCpuDxeSmm
driver. However, we place AP in hlt-loop under 1MB space borrowed after CPU
restoring CPU contexts.
In case, one NMI or SMI happens, APs may exit from hlt state and execute the
instruction after HLT instruction. But the code under 1MB is no longer safe at
that time.

This fix is to allocate one ACPI NVS range to place the AP hlt-loop code. When
CPU finished restoration CPU contexts, AP will execute in this ACPI NVS range.

https://bugzilla.tianocore.org/show_bug.cgi?id=216

v2:
  1. Make stack alignment per Laszlo's comment.
  2. Trim whitespace at end of end.
  3. Update year mark in file header.

Reported-by: Laszlo Ersek <lersek@redhat.com>
Analyzed-by: Paolo Bonzini <pbonzini@redhat.com>
Analyzed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>

MdeModulePkg/BMMUI: add comments for function parameter

Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>

IntelSiliconPkg: Add PCD for Graphics VBT FFS GUID

Added PCD PcdIntelGraphicsVbtFileGuid to store raw format
Graphics Video BIOS Table (VBT) in FFS.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>

BaseTools/Scripts: Add BinToPcd utility

https://bugzilla.tianocore.org/show_bug.cgi?id=228

Add a utility that converts a binary file into a VOID* PCD value
or a full DSC file VOID* PCD statement with support for all the
DSC supported PCD sections.

usage: BinToPcd [-h] [--version] -i INPUTFILE [-o OUTPUTFILE] [-p PCDNAME]
                [-t {VPD,HII}] [-m MAXSIZE] [-f OFFSET] [-n VARIABLENAME]
                [-g VARIABLEGUID] [-v] [-q] [--debug [0-9]]

Convert a binary file to a VOID* PCD value or DSC file VOID* PCD statement.
Copyright (c) 2016, Intel Corporation. All rights reserved.

optional arguments:
  -h, --help        show this help message and exit
  --version         show program's version number and exit
  -i INPUTFILE, --input INPUTFILE
                    Input binary filename
  -o OUTPUTFILE, --output OUTPUTFILE
                    Output filename for PCD value or PCD statement
  -p PCDNAME, --pcd PCDNAME
                    Name of the PCD in the form
                    <PcdTokenSpaceGuidCName>.<PcdCName>
  -t {VPD,HII}, --type {VPD,HII}
                    PCD statement type (HII or VPD). Default is standard.
  -m MAXSIZE, --max-size MAXSIZE
                    Maximum size of the PCD. Ignored with --type HII.
  -f OFFSET, --offset OFFSET
                    VPD offset if --type is VPD. UEFI Variable offset if
                    --type is HII.
  -n VARIABLENAME, --variable-name VARIABLENAME
                    UEFI variable name. Only used with --type HII.
  -g VARIABLEGUID, --variable-guid VARIABLEGUID
                    UEFI variable GUID C name. Only used with --type HII.
  -v, --verbose     Increase output messages
  -q, --quiet       Reduce output messages
  --debug [0-9]     Set debug level

This utility can be used in PCD value mode to convert a binary
file into a string that can then be copied into the PCD value field
of a VOID* PCD.  The following is an example of PCD value mode on
an 8 byte test.bin file.

  BinToPcd.py -i test.bin

  {0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}

The DSC file VOID* PCD statement mode can be used to generate a
complete PCD statement for the PCD section types that a DSC file
supports:

  [PcdsFixedAtBuild]
  [PcdsPatchableInModule]
  [PcdsDynamicDefault]
  [PcdsDynamicExDefault]
  [PcdsDynamicVpd]
  [PcdsDynamicExVpd]
  [PcdsDynamicHii]
  [PcdsDynamicExHii]

The PCD statement mode is useful when combined with a !include
statement in a DSC file.  BinToPcd.py can be used to convert a
binary file to a PCD statement in an output file, and that output
file can be included into a DSC file in the matching PCD section
to set the value of the PCD to the value from the binary file
without having to copy the value into the DSC file.  Updates can be
made to the included file without editing the DSC file.  Some
example use cases are the setting the public key PCDs such as:

  gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer
  gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBuffer

The following example converts a public key binary file to a
[PcdsFixedAtBuild] compatible PCD statement:

  BinToPcd.py -i PublicKey.bin -o PublicKey.pcd
    --pcd gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBufferkenSpaceGuid

The PublicKey.pcd output file contains a single line:

  gEfiSecurityPkgTokenSpaceGuid.PcdPkcs7CertBuffer|{0x48, ...}

A DSC file can be updated to include the PublicKey.pcd file:

  [PcdsFixedAtBuild]
  !include PublicKey.pcd

Value examples
===============
  BinToPcd.py -i test.bin
    {0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}

Normal examples:
=================
  BinToPcd.py -i test.bin -p Guid.Token
    Guid.Token|{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}

  BinToPcd.py -i test.bin -p Guid.Token -m 20
    Guid.Token|{0x68, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}|VOID*|20

VPD examples:
=============
  BinToPcd.py -i test.bin -p Guid.Token -t VPD
    Guid.Name|*|8|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}

  BinToPcd.py -i test.bin -p Guid.Token -t VPD -f 20
    Guid.Name|20|8|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}

  BinToPcd.py -i test.bin -p Guid.Token -t VPD -m 10
    Guid.Name|*|10|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}

  BinToPcd.py -i test.bin -p Guid.Token -t VPD -f 20 -m 10
    Guid.Name|20|10|{0x48, 0x65, 0x6c, 0x6c, 0x6f, 0x20, 0x0d, 0x0a}

HII examples:
=============
  BinToPcd.py -i test.bin -p Guid.Token -t HII -g VarGuid -n VarName
    Guid.Name|L"VarName"|VarGuid|0|{0x48, 0x65, 0x6c, 0x6c}

  BinToPcd.py -i test.bin -p Guid.Token -t HII -g VarGuid -n VarName -f 8
    Guid.Name|L"VarName"|VarGuid|8|{0x48, 0x65, 0x6c, 0x6c}

Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>

EmbeddedPkg: MmcDxe: add SPEC_VERS field in CSD structure

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

EmbeddedPkg: MmcDxe: declare ECSD structure

Declare fields in ECSD structure. And drop the original 128 words
arrary.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

EmbeddedPkg: MmcDxe: move ECSD into CardInfo structure

Since ECSD also describes the information of card, move it into
structure CardInfo.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

EmbeddedPkg: MmcDxe: wait OCR busy bit free

According to eMMC spec, OCR.PowerUp bit is also busy bit. If the busy
bit is '0', CMD1 should be sent and OCR should be fetched again. And add
a timeout counter on the repeated steps.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Tested-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

DuetPkg: Add POSTBUILD in DSC files to run post-build automatically

https://bugzilla.tianocore.org/show_bug.cgi?id=220

Currently, the post-build scripts PostBuild.bat/PostBuild.sh in DuetPkg
need to be run manually. Especially for Windows batch script, it also
requires users to set the build options (like tool chain, target and arch)
in file Conf/target.txt. If users using command line options via '-t' or
'-a', the post-build script won't work properly.

The package DSC files now support the feature to execute post-build script
automatically by adding a 'POSTBUILD' definition. This feature also passes
the build options into the post-build script as parameters. This commit
uses this feature to make the post-build works for DuetPkg more
user-friendly. Also, ReadMe.txt is updated to reflect the new steps for
UEFI Emulation (DUET) development.

Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>

DuetPkg: Use 'echo off' in BATCH script files

Instead of putting a '@' at the beginning of every command in BATCH script
files, use 'echo off' at the beginning of each file.

Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>

DuetPkg: Resolve white-space issues for post-build scripts & ReadMe

Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>

MdeModulePkg/UsbMass: Revert changes of removing retry logic

This patch is used to revert changes done in commit 17f3e942
bc527fbd75068d2d5752b6af54917487 - "MdeModulePkg/UsbMass: Not
retry if usb bot transfer execution fail"

It's because Usb Floppy will report DEVICE_ERROR for the first
several cmds when it need spin up. so retry logic makes sense.

Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>

IntelFsp2Pkg: Support to return error status from FSP API done

Added FspMemoryInitDone2, FspTempRamExitDone2, FspSiliconInitDone2
to return error status to Boot Loader for FSP API calls.
To maintain backward compatibility existing functions
(FspMemoryInitDone, FspTempRamExitDone, FspSiliconInitDone)
declaration left untouched.

Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Richard Thomaiyar <richard.marian.thomaiyar@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>

MdePkg: Fix spec mismatch in string representation of EMMC dev node

Cc: Eric Jin <eric.jin@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>

UefiCpuPkg/DxeMpLib: Place APs to suitable state on Legacy OS boot

Currently, DxeMpLib only places APs into specified c-state in Exit Boot Service
callback function for UEFI OS boot. We need to put APs into specified c-state
for legacy OS boot also.

https://bugzilla.tianocore.org/show_bug.cgi?id=210

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg/DxeMpLib: Rename MpInitExitBootServicesCallback()

Rename MpInitExitBootServicesCallback() to MpInitChangeApLoopCallback() because
it will not only be invoked on Exit Boot Service Event, but also will be invoked
on Legacy Ready To Boot Event.

https://bugzilla.tianocore.org/show_bug.cgi?id=210

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg/DxeMpLib: Allocate below 4GB mem for AsmRelocateApLoopFunc

Current implementation just allocates reserve memory for AsmRelocateApLoopFunc.
It not be safe because APs will be placed into 32bit protected mode on long mode
DXE. This reserve memory must be located below 4GB memory.

This fix is to allocate < 4GB memory for AsmRelocateApLoopFunc.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: strip whitespace at EOL]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>

SignedCapsulePkg/CapsulePkg.dsc: Add capsule related component.

Add capsule related component to check build.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>

CryptoPkg/BaseCryptLib: Make comments consistent with the function

Correct the unaligned parameter names in comments (BaseCryptLib.h and
HMAC-SHA256 wrapper implementation)

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Qin Long <qin.long@intel.com>

MdeModulePkg/BootLogoLib: Remove invalid if judgments

FreePool (Blt) function will be called in while loop, cannot be removed.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

ShellPkg/ShellCommandLib: Add missing EFIAPI for public library APIs

DumpHex() and CatSDumpHex() are public library APIs but don't have
EFIAPI modifier. Add the missing EFIAPI.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>

BaseTools/GenSec: Return correct status when input file size is 0

Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

BaseTools/GenFfs: Fix return too early when input file is of size 0

Commit 2cb874352423fcfd180199e6de8298567dff8e7f eliminates possible NULL
pointer dereference in GenFfs tool source codes. However, it doesn't
correctly handle the case when the input file is of size 0. This will lead
to possible build issues.

This commits refine the logic to handle the above case.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

ShellPkg: Fix the coding style issue

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>

Nt32Pkg/PlatformBds: Dispatch deferred images after EndOfDxe

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

QuarkPlatformPkg/PlatformBds: Dispatch deferred images after EndOfDxe

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

CorebootPayload/PlatformBds: Dispatch deferred images after EndOfDxe

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

OvmfPkg/PlatformBds: Dispatch deferred images after EndOfDxe

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

ArmVirPkg/PlatformBds: Dispatch deferred images after EndOfDxe

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

MdeModulePkg/SecurityStubDxe: Report failure if image is load earlier

The 3rd party image should be loaded after EndOfDxe event signal and
DxeSmmReadyToLock protocol installation. But non-SMM platform doesn't
published DxeSmmReadyToLock protocol.
So the SecurityStubDxe can only depend on EndOfDxe event.

This patch enhances the SecurityStubDxe to listen on
DxeSmmReadyToLock protocol installation and if any 3rd party image
is loaded before DxeSmmReadyToLock, it reports failure.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

MdeModulePkg/BdsDxe: Check deferred images before booting to OS

The patch adds check of deferred images before booting to OS.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

MdeModulePkg/UefiBootManager: Add EfiBootManagerDispatchDeferredImages

The API dispatches the deferred images that are returned from all
DeferredImageLoad instances.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe

The images not from FV are treated as 3rd party images. They will
be deferred to dispatch when they are dispatched before EndOfDxe
event.
It's a new feature in the BS.LoadImage() path which can disallow
executing 3rd party images before EndOfDxe and re-execute them
after EndOfDxe (through EfiBootManagerDispatchDeferredImages
introduced in next commit).

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>

IntelFrameworkModulePkg/LegacyBios: Fix legacy serial redirection bug

Upon booting to a legacy OS, LegacyBios driver is responsible to
initialize the BDA region with the correct COM port base address.
But the current logic to get the COM port base address from IsaIo
instance is not correct.
The patch fixes this bug.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <jeff.fan@intel.com>

MdeModulePkg/PciSioSerial: Fix a bug that wrongly produces 2 UARTs

When PciSioSerial is firstly started with a non-NULL remaining
device path, the UART instance is created using the parameters
specified in the remaining device path. Later when the driver
is started again on the same UART controller with NULL remaining
device path, the correct logic is to directly return SUCCESS
instead of current buggy implementation which wrongly produces
another UART using the default parameters.

The bug causes two UARTs are created when the UART is configured
in 57600 baud rate.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>

CorebootPayloadPkg: Fix GCC build issue on macro definition

The previous change to disable deprecated APIs in CorebootPayloadPkg
used "/D" instead of "-D".  It caused Linux GCC build error. Correct
it to use "-D" instead.

Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Rusty Coleman <rcoleman@sigovs.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Reviewed-by: Rusty Coleman <rcoleman@sigovs.com>

MdePkg UefiDevicePathLib: Validate before touch input buffer.

Current code not validate the input buffer before touch.
it may touch the buffer outside the validate scope. This
patch validate the input size big enough to touch the
first node.

Cc: Ruiyu NI <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>

MdePkg UefiDevicePathLib: Rollback former change.

Former patch still has some bugs, so rollback it and
enhance the original code.

Cc: Ruiyu NI <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>

MdePkg DevicePathLib: Validate before touch input buffer.

Current code not validate the input buffer before touch.
it may touch the buffer outside the validate scope. This
patch validate the input size big enough to touch the
first node.

Cc: Ruiyu NI <ruiyu.ni@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>

MdePkg DevicePathLib: Rollback former change.

Former patch still has some bugs, so rollback it and
enhance the original code.

Cc: Ruiyu NI <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>

BaseTools/PeCoffLib: Check 'RelocDir' before finding relocation block

To match the code logics in MdePkg/Library/BasePeCoffLib, add checks for
'RelocDir' before finding the relocation block.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

UefiCpuPkg/MpInitLib: Do not wakeup AP if only one processor supported

If MaxLogicalProcessorNumber is only 1, we needn't to wake up APs at all
and needn't to register callback functions.

It could improve boot performance on single supported system.

https://bugzilla.tianocore.org/show_bug.cgi?id=204

Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

MdeModulePkg/DxeIplPeim: UINTN used wrongly for EFI_PHYSICAL_ADDRESS

PeiServicesAllocatePages () will output sizeof (EFI_PHYSICAL_ADDRESS) value.
IdtTableForX64 is sizeof (UINTN) local variable. It will overwrite other local
variable.

This issue is found when we dump BaseOfStack value.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

UefiCpuPkg: Display new stack base and size

Dump new stack base and size information could help developer to narrow down
stack crash issue.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

MdeModulePkg: Display new stack base and size

Dump new stack base and size information could help developer to narrow down
stack crash issue.

Cc: Feng Tian <feng.tian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>

MdeModulePkg/Ufs: ensure the DBC field of UTP PRDT is dword-aligned

According to UFS Host Controller Spec(JESD223), the bits 1:0 of this
DataByteCount field shall be 11b to indicate Dword granularity.

But the size of UFS Request Sense Data Response defined in UFS Spec
(JESD220C) is 18 which is not Dword aligned, we would have to round
down to the multiple of 4 to fill the DBC field to avoid bring issue
on some UFS HCs.

Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

Vlv2TbltDevicePkg/Build: Add capsule/recovery in help info.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

Vlv2TbltDevicePkg/bat: add capsule generation in bat.

If OPENSSL_PATH is set, the build process generates capsule.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

Vlv2TbltDevicePkg/dsc/fdf: add capsule generation DSC/FDF.

Add DSC/FDF to generate capsule image.
It is separated from normal DSC/FDF, because the FDF file need use
the result of final build.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

Vlv2TbltDevicePkg/dsc/fdf: Add capsule/recovery support.

Add capsule and recovery support module in platform dsc and fdf.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

Vlv2TbltDevicePkg/PlatformBootManager: Add capsule/recovery handling.

1) Add capsule and recovery boot path handling in platform BDS.
2) Add check if the platform is using default test key for capsule.
Produce PcdTestKeyUsed to indicate if there is any
test key used in current BIOS, such as recovery key,
or capsule update key.
Then the generic UI may consume this PCD to show warning information.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

Vlv2TbltDevicePkg/FlashDeviceLib: Add DXE flash device lib.

Previous FlashDeviceLib only supports DxeRuntime and Smm.
It cannot be linked with SystemBiosUpdateDxe driver.

So we separate DxeRuntime related code into a standalone file,
and create FlashDeviceLibDxe.inf.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

Vlv2TbltDevicePkg/SystemFirmwareUpdateConfig: Add capsule config file.

Add SystemFirmwareUpdateConfig as capsule configuration file.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

Vlv2TbltDevicePkg/SystemFirmwareDescriptor: Add Capsule Descriptor.

Add SystemFirmwareDescriptor for capsule update.
The PEIM extracts SystemFirmwareDescriptor info from FFS and reports
it via PCD.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

Vlv2TbltDevicePkg/PlatformFlashAccessLib: Add instance for update.

Add PlatformFlashAccessLib for capsule update.

Cc: David Wei <david.wei@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: David Wei <david.wei@intel.com>

QuarkPlatformPkg/Readme: add capsule/recovery related content.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>

QuarkPlatformPkg/dsc/fdf: Add capsule/recovery support.

Add capsule and recovery support module in platform dsc and fdf.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Tested-by: Michael Kinney <michael.d.kinney@intel.com>