Evan Lloyd [Tue, 2 Feb 2016 11:42:51 +0000 (11:42 +0000)]
EmbeddedPkg: Rectify file modes
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Evan Lloyd [Tue, 2 Feb 2016 11:42:41 +0000 (11:42 +0000)]
BeagleBoardPkg: Rectify file modes
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Evan Lloyd [Tue, 2 Feb 2016 11:42:31 +0000 (11:42 +0000)]
ArmPlatformPkg: Rectify file modes
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Ruiyu Ni [Mon, 1 Feb 2016 03:01:39 +0000 (03:01 +0000)]
MdePkg: Add new enum EfiPlatformConfigurationActionUnsupportedGuid
Add new enum EfiPlatformConfigurationActionUnsupportedGuid to
EFI_PLATFORM_CONFIGURATION_ACTION to be used by Response() when
Query() returns a unsupported ParameterTypeGuid.
When SetTime() is called with EFI_UNSPECIFIED_TIMEZONE, the code
can optimally not create the private timezone variable because
absence of timezone variable indicates the timezone is unspecified.
Evan Lloyd [Sat, 30 Jan 2016 12:25:59 +0000 (12:25 +0000)]
ArmPkg: Rectify file modes
Problems have been encountered because some of the source files have
execute permission set. This can cause git to report them as changed
when they are checked out onto a file system with inherited permissions.
This has been seen using Cygwin, MinGW and PowerShell Git.
This patch makes no change to source file content, and only aims to
correct the file modes/permissions.
Michael Kinney [Fri, 29 Jan 2016 23:38:52 +0000 (23:38 +0000)]
QuarkPlatformPkg/PlatformInit: Clear memory based on TCG MOR request
If TCG Memory Overwrite Request is set, then clear all memory
available for use by an OS. An OS may optionally use embedded
SRAM in Quark SoC X1000, so the embedded SRAM should is cleared
too. TCG MOR requests are communicated through a UEFI variable.
This module reads UEFI variable to check state of MOR request.
Cc: Kelly Steele <kelly.steele@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Kelly Steele <kelly.steele@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19776 6f19259b-4bc3-4df7-8a09-765794883524
Star Zeng [Fri, 29 Jan 2016 09:26:49 +0000 (09:26 +0000)]
MdeModulePkg: Minor comments update to GetNextHighMonotonicCount()
Description of the GetNextHighMonotonicCount does not state that the counter
is incremented on calling this function. However, the example usage of this
API documented relies on this behavior.
UEFI 2.6 spec is to update description to match usage documented.
The high 32-bit value is nonvolatile and is increased by 1 whenever the system
resets whenever the low 32-bit count (returned by GetNextMonoticCount()) overflows.
->
The high 32-bit value is nonvolatile and is increased by 1 whenever the system
resets, whenever GetNextHighMonotonicCount() is called, or whenever the low
32-bit count (returned by GetNextMonoticCount()) overflows.
Star Zeng [Fri, 29 Jan 2016 09:15:53 +0000 (09:15 +0000)]
DuetPkg FSVariable: Minor update to the Data parameter for GetVariable()
UEFI 2.6 spec has minor update to the Data parameter for GetVariable(),
and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data The buffer to return the contents of the variable.
->
Data The buffer to return the contents of the variable. May be NULL
with a zero DataSize in order to determine the size buffer needed.
The patch is to follow the spec to update the implementation.
Star Zeng [Fri, 29 Jan 2016 09:15:43 +0000 (09:15 +0000)]
MdeModulePkg Variable: Minor update to the Data parameter for GetVariable()
UEFI 2.6 spec has minor update to the Data parameter for GetVariable(),
and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data The buffer to return the contents of the variable.
->
Data The buffer to return the contents of the variable. May be NULL
with a zero DataSize in order to determine the size buffer needed.
The patch is to follow the spec to update the implementation.
Star Zeng [Fri, 29 Jan 2016 09:15:33 +0000 (09:15 +0000)]
MdePkg: Minor update to the Data parameter for GetVariable()
UEFI 2.6 spec has minor update to the Data parameter for GetVariable(),
and no real functional behavior change.
The modifier of Data parameter:
OUT VOID *Data
->
OUT VOID *Data OPTIONAL
The comments of Data parameter:
Data The buffer to return the contents of the variable.
->
Data The buffer to return the contents of the variable. May be NULL
with a zero DataSize in order to determine the size buffer needed.
The patch is to follow the spec to update the definition.
Yonghong Zhu [Fri, 29 Jan 2016 04:48:55 +0000 (04:48 +0000)]
BaseTools:Incremental build not work if VPD values in DSC changed by -D
If a -D flag is passed into build that selects different lines in
[PcdsDynamicExVpd], then build does not see any changes to the timestamp
of the DSC file and the VPD tool is not used to regenerate the VPD
region based in the statements that are active. so we changed the detect
condition and use SaveFileOnChange function to generate VPD.
Michael Kinney [Fri, 29 Jan 2016 00:54:32 +0000 (00:54 +0000)]
QuarkPlatformPkg: Add Readme.md for QuarkPlatformPkg
Add a Readme.md for the QuarkPlatformPkg that describes how to
clone, build, boot, debug, and enable/disable features for the
Intel(R) Galileo Development Board and the Intel(R) Galileo Gen 2
Development Board.
Cc: Kelly Steele <kelly.steele@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Kelly Steele <kelly.steele@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19764 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Thu, 28 Jan 2016 11:03:15 +0000 (11:03 +0000)]
MdeModulePkg: NvmExpressDxe: clean up NvmeRead() / NvmeWrite() debug msgs
These workhorse functions are part of the BlockIo protocol that
NvmExpressDxe produces. For bulk data access, they are called very
frequently. Their debug messages should be therefore downgraded to
EFI_D_VERBOSE.
In addition, the following DEBUG() warts are cleaned up:
- The function name should be printed with %a / __FUNCTION__, so that
renaming the function, or copying the DEBUG() elsewhere, be reflected in
the debug output automatically. (In fact, after this patch, the DEBUG()
calls become identical.)
- "Lba" is of type UINT64, therefore it should be printed with %Lx, not
%x.
- "OrginalBlocks" and "Blocks" are both UINTN. The only portable way to
print UINTN is to convert it to UINT64 manually, then format it with the
%Lx (or %Lu) conversion specifier.
Zhang Lubo [Thu, 28 Jan 2016 02:32:43 +0000 (02:32 +0000)]
NetworkPkg:Fix Network memory leak when calling GetModeData interface
Multiple network protocols have a GetModeData() interface, which may
allocate memory resource in the return mode data structure. It's
callers responsibility to free these buffers.
Yao, Jiewen [Wed, 27 Jan 2016 12:16:47 +0000 (12:16 +0000)]
SecurityPkg: Correct data copy in Tpm2NvReadPublic.
1) NvPublic.dataSize data should be got from original
receive buffer, instead of returned NvPublic.
2) NvNameSize means the size of NvName without size field.
The original code treats it to be size of NvName with size
field, so the last 2 bytes are missing.
Yao, Jiewen [Wed, 27 Jan 2016 12:15:59 +0000 (12:15 +0000)]
SecurityPkg: Add TPM PTP detection in Tpm12SubmitCommand.
Previously, we only add PTP detection in Tpm12RequestUseTpm,
because RequestUseTpm does not check TPM command.
This patch also adds similar check in Tpm12SubmitCommand.
PTP device does not accept TPM12 command, so that it can
return error on PTP device, instead of wait till timeout.
Star Zeng [Wed, 27 Jan 2016 10:15:15 +0000 (10:15 +0000)]
MdeModulePkg DxeCore: Avoid the closed event to be signaled wrongly
Signal a closed event will still invoke the event notification function,
it could only be exposed when no the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
bit set in PcdDebugPropertyMask.
For example:
gBS->CreateEvent (
EVT_NOTIFY_SIGNAL,
TPL_CALLBACK,
CallbackFun,
NULL,
&Event
);
gBS->CloseEvent (Event);
gBS->SignalEvent (Event); <- CallbackFun still be invoked
Although the case to signal a closed event is abnormal, the code could
still be enhanced to avoid it.
Dandan Bi [Wed, 27 Jan 2016 02:35:36 +0000 (02:35 +0000)]
MdeModulePkg:Restore the HiiValue for string opcode
String opcode has HiiValue and BufferValue,BufferValue for string content,
HiiValue for StringId.Function GetQuestionValue only update the
BufferValue(string content),but the StringId and string content
do not match,now fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19750 6f19259b-4bc3-4df7-8a09-765794883524
Dandan Bi [Tue, 26 Jan 2016 09:42:58 +0000 (09:42 +0000)]
MdeModulePkg:Make the logic in ConfigRouting.c clear and safe
The BlockData is expected to be NULL when to call function
IsThisOpcodeRequired in each opcode,but now exists case that the
Blockdata not be cleaned,then will be used in other opcode.it
is not correct,now add the check before use.
The comments and logic in function IsThisOpcodeRequired are not
consistent,now refine the code to make the logic clear.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19749 6f19259b-4bc3-4df7-8a09-765794883524
Karyne Mayer [Tue, 26 Jan 2016 08:51:13 +0000 (08:51 +0000)]
CryptoPkg: Fix function qsort for non 32-bit machines
Although the function qsort receives as an argument a "compare" function
which returns an "int", QuickSortWorker (the function used internally by
qsort to do its job) receives as an argument a "CompareFunction" which
returns an "INTN". In a 32-bit machine, "INTN" is defined as "INT32",
which is defined as "int" and everything works well. However, when qsort
is compiled for a 64-bit machine, "INTN" is defined as "INT64" and the
return values of the compare functions become incompatible ("int" for
qsort and "INT64" for QuickSortWorker), causing malfunction.
For example, let's assume qsort is being compiled for a 64-bit machine.
As stated before, the "compare" function will be returning an "int",
and "CompareFunction" will be returning an "INT64". When, for example,
the "compare" function (which was passed as an argument to qsort and,
then, re-passed as an argument to QuickSortWorker) returns -1 (or
0xffffffff, in a 32-bit integer, its original return type) from inside
a call to QuickSortWorker, its return value is interpreted as being an
"INT64" value - which turns out to be 4294967295 (or 0x00000000ffffffff,
in a 64-bit integer) -, making the function QuickSortWorker to behave
unexpectedly.
Note that this unexpected (or incorrect) conversion does not happen when
casting an "INT32" to an "INT64" directly, but does happen when casting
function types.
The issue is fixed by changing the return type of SORT_COMPARE (the type
of "CompareFunction", used by QuickSortWorker) from "INTN" to "int".
This way, both qsort and QuickSortWorker use compatible definitions for
their compare functions.
Contributed-under: TianoCore Contribution Agreement 1.0 Acked-by: Paulo Alcantara Cavalcanti <paulo.alc.cavalcanti@hp.com> Signed-off-by: Karyne Mayer <kmayer@hp.com> Signed-off-by: Rodrigo Dias Correa <rodrigo.dia.correa@hp.com> Signed-off-by: Arthur Crippa Burigo <acb@hp.com> Reviewed-by: Qin Long <qin.long@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19748 6f19259b-4bc3-4df7-8a09-765794883524
Qiu Shumin [Tue, 26 Jan 2016 08:17:19 +0000 (08:17 +0000)]
ShellPkg: Refine the code to avoid use a constant number as offset.
Refine the code to use 'sizeof(EFI_LOAD_OPTION)' as offset in buffer to get 'description' instead of using a constant number.
This change makes the code more readable.
Yao, Jiewen [Tue, 26 Jan 2016 01:30:55 +0000 (01:30 +0000)]
SecurityPkg: Add TPM PTP support in TCG2 Config.
This patch add PTP CRB support in BIOS Setup.
It can:
1) Display the PTP capability (TIS/FIFO/CRB)
2) Display the PTP current interface (TIS/FIFO/CRB)
3) Let user select CRB/FIFO, if supported.
Yao, Jiewen [Tue, 26 Jan 2016 01:30:35 +0000 (01:30 +0000)]
SecurityPkg: Add TPM PTP detection in TPM12 device lib.
The TPM RequestUseTpm API can only set register to
use the hardware, but it can not be used to distinguish
TPM12 or TPM2 device.
TPM PTP defines same address with TIS, so we need
detect the TPM device is PTP or TIS in RequestUseTpm.
Also, Tcg2Config driver call RequestUseTpm to detect
TPM hardware device. So we have to add check here.
There is no need to support PTP CRB style SubmitCommand(),
because TPM2 device can not accept TPM12 style command.
This patch also uses TpmTis.h instead of duplicate
definition.
Yao, Jiewen [Tue, 26 Jan 2016 01:30:17 +0000 (01:30 +0000)]
SecurityPkg: Add TPM PTP support in TCG2 SMM.
TPM2 hardware may support PTP FIFO/TIS interface
or PTP CRB interface. The original ACPI table only
handles PTP FIFO/TIS interface. This patch adds
PTP CRB interface support.
The current logic is that SMM driver will runtime
detect TPM device interface (CRB or FIFO/TIS) and
publish TPM2 table based on result.
It is compatible for old TPM2 FIFO/TIS device and
new TPM2 CRB device.
Yao, Jiewen [Tue, 26 Jan 2016 01:29:38 +0000 (01:29 +0000)]
SecurityPkg: Add TPM PTP support in TPM2 device lib.
TPM2 hardware may support PTP FIFO/TIS interface
or PTP CRB interface. The original lib only handles
PTP FIFO/TIS interface. This patch adds PTP CRB
interface support.
The current logic is that lib will runtime detect
TPM device interface (CRB or FIFO/TIS) and call
proper function to access hardware.
It is compatible for old TPM2 FIFO/TIS device and
new TPM2 CRB device.
Paolo Bonzini [Mon, 25 Jan 2016 11:33:37 +0000 (11:33 +0000)]
MdeModulePkg/.../IdeMode: correctly report length of returned data
For some SCSI commands, notably INQUIRY, it's relatively common for
the device to provide less data than we intended to read, and for
this reason EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET makes
InTransferLength and OutTransferLength read-write. Make ATAPI
aware of this.
This makes it possible to handle EFI_NOT_READY always, not just
for read as done in r19685.
I've chosen to use a break statement instead of calling
CheckStatusRegister directly; the break statement reaches a
pre-existing call the CheckStatusRegister function. This
ensures that the assignment to *ByteCount is not missed, and
adds a further sanity check to DRQClear.
Add MEASURED_BOOT_ENABLE flag
Add TPM_12_HARDWARE flag
Add TrEEConfigPei to detect TPM 1.2 hardware device
Use Tpm12DeviceLib instance for Atmel I2C TPM
Use Tpm12DeviceLib instance for Infineon I2C TPM
Add TcgPei and TcgDxe modules for TPM 1.2 support
Clean up TpmMeasurementLib mappings
Cc: Kelly Steele <kelly.steele@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Kelly Steele <kelly.steele@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19732 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:30:21 +0000 (19:30 +0000)]
SecurityPkg/TcgDxe: Use updated Tpm12CommandLib APIs
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19729 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:30:14 +0000 (19:30 +0000)]
SecurityPkg/TcgPei: Use updated Tpm12CommandLib APIs
Use the following new APIs in Tpm12CommandLib and remove duplicate
code from TcgPei and TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19728 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:30:05 +0000 (19:30 +0000)]
SecurityPkg/Tpm12CommandLib: Add TPM 1.2 commands used by TCG modules
Add the following APIs that are required by TcgPei and/or TcgDxe to
the Tpm12CommandLib instance:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19727 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:29:56 +0000 (19:29 +0000)]
SecurityPkg/Tpm12CommandLib.h: Add TPM 1.2 commands used by TCG modules
Add the following APIs that are required by TcgPei and/or TcgDxe:
Tpm12Extend()
Tpm12PhysicalPresence()
Tpm12ContinueSelfTest()
Tpm12GetCapabilityFlagPermanent()
Tpm12GetCapabilityFlagVolatile()
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19726 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:29:50 +0000 (19:29 +0000)]
SecurityPkg/Tcg2Config: Remove use of IoLib
Remove the use of the IoLib and Mmioxx() calls to detect dTPM.
This module calls the Tpm12DeviceLib to detect a TPM and the
implementation of the Tpm12DeviceLib for dTPM performs the same
Mmioxx() calls to detect a dTPM. This change makes this module
more generic and portable by maximizing the use of the Tpm12DeviceLib
abstraction for TPM detection.
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19725 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:29:43 +0000 (19:29 +0000)]
SecurityPkg/TrEEConfig: Remove use of IoLib
Remove the use of the IoLib and Mmioxx() calls to detect dTPM.
This module calls the Tpm12DeviceLib to detect a TPM and the
implementation of the Tpm12DeviceLib for dTPM performs the same
Mmioxx() calls to detect a dTPM. This change makes this module
more generic and portable by maximizing the use of the Tpm12DeviceLib
abstraction for TPM detection.
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19724 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:29:35 +0000 (19:29 +0000)]
SecurityPkg/TcgConfigDxe: Replace TpmCommLib with Tpm12DeviceLib
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19723 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:29:28 +0000 (19:29 +0000)]
SecurityPkg/TcgDxe: Replace TpmCommLib with Tpm12DeviceLib
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19722 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 21 Jan 2016 19:29:19 +0000 (19:29 +0000)]
SecurityPkg/TcgPei: Replace TpmCommLib with Tpm12DeviceLib
Update TCG drivers for TPM 1.2 devices to use Tpm12DeviceLib instead
of TpmCommLib. This is required to support TPM 1.2 hardware devices
that are not on LPC bus.
The current versions of the TCG PEIM and DXE driver contain
MMIO reads/writes to a TPM attached to an LPC bus. In order
to support TPMs that are connected to other bus types, the
TGC PEIM and DXE drivers must be updated to not perform any
direct register accesses to any TPMs.
Cc: Chao Zhang <chao.b.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19721 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Thu, 21 Jan 2016 18:40:40 +0000 (18:40 +0000)]
ShellPkg: elevate DumpHex() from Debug1-internal to generic-internal
The UEFI Shell specification classifies shell commands into various shell
levels / profiles.
Currently the DumpHex() internal function is only used by commands that
belong to the Debug1 profile exclusively (i.e., they are not required to
be present in other than Debug1 profiles):
- SMBIOSVIEW
- PCI
- DMPSTORE
- DMEM
- DBLK
In the next patch, we'd like to call DumpHex() from BCFG as well. However,
BCFG is not only required to be present in the Debug1 profile; the
Install1 profile contains BCFG as well. For this reason, move DumpHex()
from UefiShellDebug1CommandsLib to the more generic UefiShellCommandLib,
which "Provides interface to shell internal functions for shell commands".
The matching header file is "ShellPkg/Include/Library/ShellCommandLib.h".
Laszlo Ersek [Thu, 21 Jan 2016 18:40:35 +0000 (18:40 +0000)]
ShellPkg: BcfgDisplayDump(): fix ShellPrintEx() call site
This is likely a copy & paste error from the preceding ShellPrintHiiEx()
function call. ShellPrintEx() takes no Language parameter, so remove the
NULL argument, which is currently misinterpreted as a format string.
This bug prevents the hexdump of optional data even when -v is passed to
BCFG, and optional data exist.
Copying and releasing each EFI_LOAD_OPTION.FilePathList under the name
DevPath is wasteful -- we only need FilePathList for a single conversion
to text. Do it directly from the EFI_LOAD_OPTION object.
This patch is not supposed to change observable behavior.
Laszlo Ersek [Thu, 21 Jan 2016 18:40:13 +0000 (18:40 +0000)]
ShellPkg: BcfgDisplayDump(): address FilePathListLength by name
The Buffer variable points at the beginning of an EFI_LOAD_OPTION
structure. We might as well address the "FilePathListLength" member by
name, rather than with *(UINT16*)(Buffer+4).
Laszlo Ersek [Thu, 21 Jan 2016 18:40:09 +0000 (18:40 +0000)]
ShellPkg: BcfgDisplayDump(): enforce minimum size for Boot#### and co.
"3.1.1 Boot Manager Programming" in the UEFI 2.5 spec mandates that
Boot#### and similar options contain EFI_LOAD_OPTION structures. The
EFI_LOAD_OPTION structure encodes the fixed initial part of the payload,
and we can (and should) use it to enforce a minimum size for variable
contents.
Laszlo Ersek [Thu, 21 Jan 2016 18:40:05 +0000 (18:40 +0000)]
ShellPkg: BcfgDisplayDump(): accumulate errors
Don't exit the command immediately when a variable access fails; continue
processing after printing the error message. Let the final return status
reflect any encountered errors.
This patch is intended as a functional improvement.
This patch incurs no functional changes, it just modifies some whitespace,
so we can separate these non-functional changes from the functional
changes in the next patches.
Eugene Cohen [Thu, 21 Jan 2016 09:10:55 +0000 (09:10 +0000)]
BaseTools: make build report tolerant of FVs specified by name
Check if the FV name is in the FV dictionary before using it which fixes
a crash during build report generation when FVs are specified by path in
the FDF.
Laszlo Ersek [Thu, 21 Jan 2016 00:29:12 +0000 (00:29 +0000)]
MdeModulePkg: TerminalDxe: select the UART's default receive FIFO depth
The Serial IO protocol instances provided by SerialDxe and consumed by
TerminalDxe come with a Mode.ReceiveFifoDepth=1 default setting, as
required by UEFI 2.5.
Although TerminalDxe calls EFI_SERIAL_IO_PROTOCOL.SetAttributes() in the
TerminalDriverBindingStart() and TerminalConInTimerHandler() functions, it
only does so to change the Mode.Timeout member. Other members of Mode,
including Mode.ReceiveFifoDepth, are preserved.
On some platforms this causes the UART that underlies TerminalDxe not to
have enough room for bursts of scan codes, which translates to broken
parsing of escape sequences, e.g. cursor movement keys.
According to the UEFI spec, passing ReceiveFifoDepth=0 to
EFI_SERIAL_IO_PROTOCOL.SetAttributes() "will use the device's default FIFO
depth". While TerminalDxe could try to configure a receive FIFO depth that
matches the longest escape sequence it wishes to parse, in practice the
device-specific default FIFO depth -- which may well differ from the
spec-mandated SerialIo->Mode.ReceiveFifoDepth=1 default -- seems to work.
Hence let's just set that.
This issue was exposed by SVN r18971 / git commit 921e987b2b
("ArmPlatformPkg: Use SerialDxe in MdeModulePkg instead of EmbeddedPkg").
In that conversion, MdeModulePkg's SerialDxe started to initialize
Mode.ReceiveFifoDepth to 1 (in conformance with the spec), unlike the
prior, non-conformant initialization to 0 in EmbeddedPkg's SerialDxe.
Since TerminalDxe would never change ReceiveFifoDepth from the new default
value 1, and the ArmPlatformPkg/Drivers/PL011Uart library instance,
underlying SerialDxe through SerialPortLib, would obey it too, they would
collectively effect a receive queue depth of 1, rather than the default 16
or 32. This broke cursor keys on the ARM FVP and Juno platforms.
It is the client of EFI_SERIAL_IO_PROTOCOL that is responsible for
modifying the attributes, if the defaults are not appropriate, hence this
patch modifies TerminalDxe.
Laszlo Ersek [Thu, 21 Jan 2016 00:29:07 +0000 (00:29 +0000)]
MdeModulePkg: SerialDxe: sync EFI_SERIAL_IO_MODE.Timeout with the spec
In "11.8 Serial I/O Protocol", UEFI 2.5 requires:
The default attributes for all UART-style serial device interfaces are:
(a) 115,200 baud,
(b) a 1 byte receive FIFO,
(c) a 1,000,000 microsecond timeout per character,
(d) no parity,
(e) 8 data bits,
(f) and 1 stop bit.
It also says, about the EFI_SERIAL_IO_MODE.ControlMask member:
(g) A mask of the Control bits that the device supports. The device must
always support the Input Buffer Empty control bit.
SerialDxe complies with requirement (b) via hard-coded constants. It
complies with requirements (a), (d), (e) and (f) through PCD defaults (see
MdePkg/MdePkg.dec):
Charles Duffy [Wed, 20 Jan 2016 05:15:55 +0000 (05:15 +0000)]
BaseTools: Improve LzmaF86Compress wrapper
- Remove test usage declared obsolescent by POSIX
- Pass argv array through as literal rather than forming into a string, then
string-splitting and glob-expanding same.
Charles Duffy [Wed, 20 Jan 2016 05:12:02 +0000 (05:12 +0000)]
BaseTools: Improve shell wrapper for C build commands
- Avoid obsolescent forms of test builtin (`-a` and `-o`; see APPLICATION USAGE
section of http://pubs.opengroup.org/onlinepubs/9699919799/utilities/test.html).
- Quote all expansions to prevent string-splitting and globbing.
- Avoid unspecified "exit -1" (only single-byte integers are valid); instead,
use identical exit status to shell command-not-found.
Charles Duffy [Wed, 20 Jan 2016 05:09:06 +0000 (05:09 +0000)]
BaseTools: Improve shell wrappers for Python build commands
- Use `python2` executable if it exists, to avoid breakage on systems (such as
Arch Linux) where `python` is Python 3.
- Quote all references to `$0`, for safety when located in a directory
containing spaces in its name.
- Use the `exec` shell command to avoid leaving the shell wrapper in the
process table when invoking the actual build tool.
- Use `"$@"` rather than `$*` to pass arguments through directly rather than
concatenating to a string, and then string-splitting and glob-expanding its
contents.
- Use `$BASH_SOURCE` in preference to `$0` (which is only guaranteed to be
process name, *not* source path).
Yao, Jiewen [Tue, 19 Jan 2016 13:20:50 +0000 (13:20 +0000)]
MdeModulePkg: Add MorLockSmm to variable driver.
Microsoft published secure MOR implementation at https://msdn.microsoft.com/en-us/library/windows/hardware/mt270973(v=vs.85).aspx
with revision 2 update. See URL for tech detail.
Previous revision 1 is handled in SecurityPkg\Tcg\ MemoryOverwriteRequestControlLock.
But the VarCheck API can not satisfy revision 2 requirement.
So we decide include MOR lock control into variable driver directly.
This patch add standalone TcgMorLockSmm implementation.
projects / mirror_edk2.git / log