Jeff Brasen [Wed, 17 Feb 2016 19:13:48 +0000 (12:13 -0700)]
MdeModulePkg/EbcDxe: Add AARCH64 EBC VM support
Adds support for the EBC VM for AARCH64 platforms
Submitted on behalf of a third-party: The Linux Foundation
This contribution is licensed under the BSD license as found at
http://opensource.org/licenses/bsd-license.php
Jeff Fan [Wed, 24 Aug 2016 14:42:32 +0000 (22:42 +0800)]
UefiCpuPkg/MpInitLib: Don't allocate reset vector in Exit Boot Service
In Exit Boot Services callback function, we cannot use allocate memory services
because it may change the memory map that has been gotten by OS.
This fix is not to allocate reset vector buffer after SaveRestoreFlag is set to
TRUE in MpInitExitBootServicesCallback(). Instead AllocateResetVector() will use
the previous allocated buffer address and save the contents before copying reset
vector code. At the same time, FreeResetVector() will restore original contents
after if SaveRestoreFlag is TRUE.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
Jeff Fan [Wed, 24 Aug 2016 13:37:14 +0000 (21:37 +0800)]
UefiCpuPkg/MpInitLib: Move timeout delay to WakupAp()
After sending the 1st broadcast INIT-SIPI-SIPI, BSP will collect APs count after
one specified timeout delay. However, WakupAp() will restore reset vector
immediately after sending 1st broadcast INIT-SIPI-SIPI. Some processors may not
complete executing reset vector code.
This fix is to move MicroSecondDelay() from CollectProcessorCount() to the place
that is after sending 1st broadcast INIT-SIPI-SIPI and before FreeResetVector()
in WakupAp().
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
Ruiyu Ni [Tue, 23 Aug 2016 02:40:55 +0000 (10:40 +0800)]
Revert "ShellPkg: Move FindFirstCharacter/GetNextParameter to ShellCommandLib"
This reverts commit c0bcd3433f33876c519bf5567e0ab69261b57fe9.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Ruiyu Ni [Tue, 23 Aug 2016 02:40:42 +0000 (10:40 +0800)]
Revert "ShellPkg: Add Shell[Get|Set]RawCmdLine to ShellCommandLib"
This reverts commit 0fcf8d4df85d861b6e721bd1d8abb449f05e15ed.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Ruiyu Ni [Tue, 23 Aug 2016 02:40:02 +0000 (10:40 +0800)]
Revert "ShellPkg: Fix echo to support displaying special characters"
This reverts commit 95fc5a877502a6e6324300eed0136243d359fa96.
The above commit causes several regression of "echo" command:
1. Double quotes are not being stripped from the final text. UEFI Shell 2.2 section 3.4.5 chops out the quotes.
2. Output redirection is not working as expected. Text is being redirected, but the ‘> …’ text should not be.
3. Inconsistent special character handling. For example, comments with # seem to be parsed out correctly, but handing of ^ is incorrect.
In summary, ‘echo “You are ^#1” > t.txt’ results in the below content in t.txt:
“You are ^#1” > t.txt
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Tapan Shah <tapandshah@hpe.com>
Zhang Lubo [Fri, 19 Aug 2016 07:38:20 +0000 (15:38 +0800)]
MdeModulePkg:Fix bug in function AsciiStrToIp4.
If a FQDN contains 3 dots '.' like "a.b.c.com", the AsciiStrToIp4
will return success as the HostName has a valid IP address. So we
need to check if it is a decimal character before using AsciiStrDecimalToUintn.
Ard Biesheuvel [Mon, 22 Aug 2016 10:00:08 +0000 (12:00 +0200)]
BaseTools/GenFw: ignore dynamic RELA sections
When building PIE (ET_DYN) executables, an additional RELA section is
emitted (in addition to the per-section .rela.text and .rela.data sections)
that is intended to be resolved at runtime by a ET_DYN compatible loader.
At the moment, due to the fact that we don't support GOT based relocations,
this dynamic RELA section only contains relocations that are redundant,
i.e., each R_xxx_RELATIVE relocation it contains duplicates a R_xxx_xx64
relocation appearing in .rela.text or .rela.data, and so we can simply
ignore this section (and we already ignore it in practice due to the fact
that it points to the NULL section, which has the SHF_ALLOC bit cleared).
Note that GOT based relocations result in entries that *only* appear in the
dynamic .rela section and not in .rela.text or .rela.data. This means two
things if we intend to add support for GOT based relocations:
- we must check that a dynamic RELA section exists;
- we must filter out duplicates between .rela and .rela.xxx, to prevent
emitting duplicate fixups into the PE/COFF .reloc section.
Liming Gao [Thu, 18 Aug 2016 11:51:21 +0000 (19:51 +0800)]
MdeModulePkg/Browser: Fix conflicting policy in getting default of checkbox
We have added a new policy to get default value for question:
get default from other default id if current default is not specified.
But when getting default value for checkbox, if the default
flag is not set, it will set the default value to FALSE for checkbox.
This behavior in checkbox conflicts with the new added policy,
so now we move this behavior to the end of getting default form other
default id.
IntelFsp2Pkg: Add function to get FspInfoHeader before stack is ready
we need to locate the FSP Info Header before the stack is initialized to
access the cfg region for any UPD. Hence adding the
AsmGetFspInfoHeaderNoStack function to support it.
Note: This function is there in IntelFspPkg but got removed in IntelFsp2Pkg
Cc: Maurice Ma <maurice.ma@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Satya Yarlagadda <satya.p.yarlagadda@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Yonghong Zhu [Tue, 9 Aug 2016 02:41:42 +0000 (10:41 +0800)]
BaseTools/UserManuals: update with new report bug mail address
The .rtf files in BaseTools/UserManuals still tell users to Report bugs
to sourceforge mail address. Since we no longer use the sourceforge
mailing lists we should update it.
Hao Wu [Wed, 17 Aug 2016 13:28:39 +0000 (21:28 +0800)]
SecurityPkg Tcg2: Remove use of module internal API InternalIsZeroBuffer()
This commit removes the internal implementation of the function
InternalIsZeroBuffer(). Instead, it will use the API IsZeroBuffer() from
BaseMemoryLib in MdePkg.
Hao Wu [Wed, 17 Aug 2016 06:26:25 +0000 (14:26 +0800)]
MdePkg BaseMemoryLib: Add assembly implementation of API IsZeroBuffer()
Add the implementation of API IsZeroBuffer() via assembly for the
following library instances:
BaseMemoryLibMmx
BaseMemoryLibOptDxe
BaseMemoryLibOptPei
BaseMemoryLibRepStr
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Hao Wu [Wed, 17 Aug 2016 13:12:57 +0000 (21:12 +0800)]
SecurityPkg Tcg2: Rename internal API IsZeroBuffer to InternalIsZeroBuffer
Before adding API IsZeroBuffer() in BaseMemoryLib at MdePkg, rename the
internal implementations of IsZeroBuffer() within SecurityPkg/Tcg modules
to avoid breaking bisection.
Ard Biesheuvel [Wed, 10 Aug 2016 08:55:30 +0000 (10:55 +0200)]
BaseTools/GccBase.lds: don't copy RELA section to PE/COFF
The CLANG38 toolchain creates a PIE binary at link time. This is
necessary since the LTO code generation may otherwise result in
code that cannot execute correctly when loaded above 2 GB.
PIE executables contain a RELA section consisting of dynamic
relocation entries that are intended for consumption by the loader
at runtime. For this reason, it has the SHF_ALLOC attribute set by
default, and will be identified by GenFw as a section that needs to
be copied into the PE/COFF binary, resulting in waste of space since
the PE/COFF loader does not use this data at all.
So mark the RELA section as informational: this will prevent the
linker from setting the SHF_ALLOC attribute, causing GenFw to
ignore it.
Liming Gao [Mon, 22 Aug 2016 03:09:01 +0000 (11:09 +0800)]
BaseTools PeCoffLib: Fix the issue to get RelocationsStripped from TE image
If PE image has no relocation section, and has not set RELOCS_STRIPPED,
after it is converted to TE image, GenFw will set its relocation section
VirtualAddress to non-zero address, and keep Size value as Zero. MdePkg
BasePeCoffLib applied this rule to get RelocationsStripped attribute. But,
it is missing in BaseTools BasePeCoffLib.
Yonghong Zhu [Wed, 17 Aug 2016 10:52:51 +0000 (18:52 +0800)]
BaseTools: Fix a bug use 'COMMON' as CodeBase in BuildOptions section
Current BaseTools query the BuildOptions not cover the case that use
'COMMON' as CodeBase, while DSC spec allow this usage. This Patch add
support for such 'common.DXE_RUNTIME_DRIVER' as the Scope2 in the query
Condition.
Yonghong Zhu [Mon, 15 Aug 2016 05:52:12 +0000 (13:52 +0800)]
BaseTools: FMP capsule add the support to generate auth info
Current BaseTools cannot generate EFI_FIRMWARE_IMAGE_AUTHENTICATION
for FMP capsule. this patch fix it by FDF spec's update to add the
definition for CERTIFICATE_GUID and MONOTONIC_COUNT. BaseTools call
the tool by CERTIFICATE_GUID to generate the certdata and fill the header
info.
Yonghong Zhu [Mon, 15 Aug 2016 05:39:32 +0000 (13:39 +0800)]
BaseTools: Rsa2048Sha256Sign add new option to support Monotonic count
the EFI_FIRMWARE_IMAGE_AUTHENTICATION struct require the AuthInfo which
is a signature across the image data and the Monotonic Count value, so we
add the new option to support Monotonic count.
Yonghong Zhu [Mon, 15 Aug 2016 09:12:12 +0000 (17:12 +0800)]
BaseTools: Add the PKCS7 tool
Provide the PKCS7 Tool to support the CertType - EFI_CERT_TYPE_PKCS7_GUID,
then user can use this tool to add EFI_FIRMWARE_IMAGE_AUTHENTICATION
for a binary.
Jeff Fan [Fri, 19 Aug 2016 02:36:37 +0000 (10:36 +0800)]
DuetPkg: Add DxeMpInitLib instance reference
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Dandan Bi <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Shi, Steven [Fri, 19 Aug 2016 02:46:20 +0000 (10:46 +0800)]
BaseTools-CLANG38: Add -O3 in DLINK2 flag
CLANG38 build fail after CC_FLAG is added in the link rule.
This failure is because the CLANG38 enable the LTO through LLVMgold.so
linker plugin, but the LLVMgold.so plugin cannot accept the clang -Oz
CC flag as build option. After CC_FLAG is added in the link rule,
the LLVMgold.so plugin reports linking error. LLVMgold.so only accept
-O0 ~ -O3, and you can see it in the LLVM gold plugin source code
in below:
Yonghong Zhu [Thu, 18 Aug 2016 02:07:36 +0000 (10:07 +0800)]
BaseTools: check CONF_PATH env to get the configure files
Add CONF_PATH env check. First priority is user set the conf dir by
--conf option, then the CONF_PATH env, the last one is the standard
WORKSPACE(PACKAGE_PATH)/Conf.
Also print the conf path directory in the build log.
Jiaxin Wu [Mon, 15 Aug 2016 03:49:56 +0000 (11:49 +0800)]
NetworkPkg/IpSecDxe: Fix wrong IKE header "FLAG" update
*v2: update the commit log and refine the code comments.
There are three kinds of IKE Exchange process:
#1. Initial Exchange
#2. CREATE_CHILD_SA_Exchange
#3. Information Exchange
The IKE header "FLAG" update is incorrect in #2 and #3 exchange,
which may cause the continue session failure. This patch is used
to correct the updates of IKE header "FLAG" according the RFC4306
section 3.1.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
If Initial Exchange message is initiated by Linux IKE, it works well.
But the failure will happen if it's initiated by UEFI IKE. This issue
is caused by the no status check of NotifyCookiePayload.
While parsing the IKEv2 packet for IKE_SA_INIT exchange, if the packet
doesn't contain COOKIE Notify payload, EFI_INVALID_PARAMETER will be
returned from Ikev2ParserNotifyCookiePayload(). Current implementation
return this error status directly, then the session will be broken. The
correct behavior should check this status. If no COOKIE Notify payload,
initiator don't need to retry the IKE_SA_INIT.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Zhang Lubo <lubo.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
Prince Agyeman [Wed, 17 Aug 2016 17:55:22 +0000 (10:55 -0700)]
CorebootPayloadPkg: fixed GCC49 and GCC5 hang in PeiCore
Section alignment of .data in GCC49 and GCC5 are 0x40
rather than 0x20 in GCC48 and below.
This causes a hang in PeiCore.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Prince Agyeman <prince.agyeman@intel.com>
Reviewed by: Maurice Ma <maurice.ma@intel.com>
Prince Agyeman [Wed, 17 Aug 2016 16:32:12 +0000 (09:32 -0700)]
CorebootPayloadPkg : Added MpInitLib to CorebootPayloadPkg.dsc
MpInitLib is consumed by CpuDxe
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Prince Agyeman <prince.agyeman@intel.com>
Reviewed by: Maurice Ma <maurice.ma@intel.com>
Jiaxin Wu [Mon, 15 Aug 2016 02:34:49 +0000 (10:34 +0800)]
MdeModulePkg: Fix potential failure if UseDefaultAddress configured
IpSb->Reconfig should not be set to TRUE to focal the reconfiguration
during the policy changes from Static to DHCP. It's redundancy because
the default router table and default addresses have been freed ahead (
Detailed see Ip4Config2OnPolicyChanged() function). Otherwise, the
potential failure will appear if UseDefaultAddress configured. Reproduce
steps see below:
#1. Set policy to DHCP.
#2. If DHCP process is not complete yet, then run one APP to invoke UDP4
Configure with "UseDefaultAddress = TRUE" (loop to call UDP4 Configure
until Ip4Mode.IsConfigured changes to TRUE).
#3. Even DHCP succeed but Ip4Mode.IsConfigured flag never set to TRUE
Concrete analysis is as follows:
In #1, the policy will be set to DHCP, and then Ip4Config2OnPolicyChanged()
will be called. In this function, if "IpSb->Reconfig" flag is set to TRUE,
the original "IpSb->DefaultInterface" will be abandoned/freed once the
DHCP process finished.
In #2, UDP4 Configure with "UseDefaultAddress = TRUE" is called, that means
the default interface (IpSb->DefaultInterface) will be selected as current
instance's interface.
In #3, when DHCP process finished, the original DefaultInterface will be
abandoned/freed because "IpSb->Reconfig" flag is true. Meanwhile, one new
interface is assigned to "IpSb->DefaultInterface". This new interface is
different to the original one assigned to the UDP4 Configured instance. So,
even DHCP process succeed, the up caller will never have the chance to get
it's truly status.
Cc: Cohen Eugene <eugene@hp.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Tested-by: Eugene Cohen <eugene@hp.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
Zhang Lubo [Mon, 1 Aug 2016 08:33:26 +0000 (16:33 +0800)]
NetworkPkg: Fix assert issue in iSCSI driver
The bug is caused by using already freed memory.
If there is already an attempt and execute
'reconnect -r' command, all the AttemptConfig structure
will be freed, but the mCallbackInfo->Current is not
configured as null and this pointer will be used again in
IScsiFormExtractConfig.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Zhang Lubo [Thu, 11 Aug 2016 02:14:55 +0000 (10:14 +0800)]
NetworkPkg: Refine codes of iSCSI driver
The RSDT is only used when the bios need to support ACPI 1.0
version. When change PcdAcpiExposedTableVersions to 0x3C, it
will not support ACPI 1.0. The default is 0x3E.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Zhang Lubo [Thu, 11 Aug 2016 02:24:10 +0000 (10:24 +0800)]
MdeModulePkg: Refine codes of iSCSI driver
The RSDT is only used when the bios need to support ACPI 1.0
version. When change PcdAcpiExposedTableVersions to 0x3C, it
will not support ACPI 1.0. The default is 0x3E.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Star Zeng [Wed, 17 Aug 2016 02:08:31 +0000 (10:08 +0800)]
PcAtChipsetPkg AcpiTimerLib: Wait 363 ACPI timer counts to get TSC Freq
Compute the number of ticks to wait to measure TSC frequency.
Instead of (ACPI_TIMER_FREQUENCY / 10000) = 357 and 357 * 10000 = 3570000,
use 363 * 9861 = 3579543 Hz which is within 2 Hz of ACPI_TIMER_FREQUENCY.
363 counts is a calibration time of 101.4 uS.
The idea comes from Michael and Paolo.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul A Lohr <paul.a.lohr@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
PiSmmCpuDxeSmm driver's entry point will get some PCDs supported dynamic type.
In case those PCDs are set as DynamicHii type in platform DSC File, it implies
that EFI Variable Arch protocol is required.
This fix is to add gEfiVariableArchProtocolGuid dependency on PiSmmCpuDxeSmm
driver to make sure those DynamicHii PCDs could be read correctly.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
v5:
If PcdCpuMaxLogicalProcessorNumber is set to 1 on UP system,
MpInitLibInitialize() will be invoked. This is one bug, we need to
call MpInitLibInitialize() always and get the BSP information.
Just to remove PcdCpuMaxLogicalProcessorNumber() consuming from this
driver.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Fri, 22 Jul 2016 02:42:47 +0000 (10:42 +0800)]
UefiCpuPkg/CpuDxe: Consume MpInitLib to produce CPU MP Protocol services
Consume MP Initialize library to produce CPU MP Protocol services to simply the
code.
v4:
1. Update CpuDxe.c file header to mention it produces CPU Arch protocol.
2. Update BistData type from UINT32 to EFI_HEALTH_FLAG.
3. Move some header location from CpuMp.h to CpuDxe.h.
v3:
1. Move the code Consume MpInitLib APIs to produce CPU MP Protocol from patch
#40 to this patch.
2. Add DxeMpInitLib.inf in DSC file
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Fri, 22 Jul 2016 02:12:51 +0000 (10:12 +0800)]
UefiCpuPkg/CpuMpPei: Consume MpInitLib to produce CPU MP PPI services
Consume MP initialize library to produce CPU MP PPI, it could simply the code.
Add STATIC for some internal functions to avoid build issue with the same
functions name in PeiMpInit instance. They will be removed by the next patch.
v4:
1. Update BistData type from UINT32 to EFI_HEALTH_FLAGS.
v3:
1. Rename MpInitLibSwitchBSP to MpInitLibSwitchBSP
2. Add PeiMpInitLib.inf in DSC file
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Thu, 21 Jul 2016 14:57:12 +0000 (22:57 +0800)]
QuarkPlatformPkg: Add MpInitLib reference in DSC files.
This update is for CpuDxe consuming MP Initialize library.
v5:
1. Update Quark DSC files to add PeiMpInitLib.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Kelly Steele <kelly.steele@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Sun, 24 Jul 2016 15:03:12 +0000 (23:03 +0800)]
UefiCpuPkg/MpInitLib: Place APs in safe loop before hand-off to OS
Register Exit Boot Service callback function MpInitExitBootServicesCallback() to
place AP one safe loop before hand-off to OS.
Allocated one reserved memory and copy the AsmRellocateApLoop() code into it. It
could avoid the CPU Dxe driver (located in Boot Service data range) crashed
after Exit Boot Service event.
Place AP into the target Cx-State (specified by PcdCpuApTargetCstate) could save
power if Monitor-mwait feature supported.
In long mode, switch AP into protected mode could let AP not require page table
when executing this safe loop. Page Table (located in Boot Service data range)
may crashed after Exit Boot Service event.
v3:
1. Rename *RellocateAp* to *RelocateAp*
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Thu, 21 Jul 2016 13:33:11 +0000 (21:33 +0800)]
UefiCpuPkg/MpInitLib: Implementation of MpInitLibStartupAllAPs()
v4:
1. Simply the internal function StartupAllAPsWorker()'s function
header due to it is duplicated with MpInitLibStartupAllAPs().
v3:
1. Use CamelCase for mStopCheckAllApsStatus and
CheckAndUpdateApsStatus()
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Thu, 21 Jul 2016 13:23:05 +0000 (21:23 +0800)]
UefiCpuPkg/MpInitLib: Implementation of MpInitLibEnableDisableAP()
v4:
1. Simply the internal function MpInitLibEnableDisableAP()'s function
header due to it is duplicated with MpInitLibEnableDisableAP().
v3:
1. Use CamelCase for mCheckAllAPsEvent, mStopCheckAllApsStatus.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 16:32:53 +0000 (00:32 +0800)]
UefiCpuPkg/MpInitLib: Skip collect processor count if GUIDed HOB exist
If GUIDed HOB mCpuInitMpLibHobGuid exists, we could get the processor count and
processor APICID and Initial APICID from CPU_INFO_IN_HOB. We needn't to delay
for broadcast INIT-SIPI-SIPI results and could improve performance.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 16:29:49 +0000 (00:29 +0800)]
UefiCpuPkg/MpInitLib: Enable x2APIC mode on BSP/APs
If x2APIC flag is set, enable x2APIC mode on all APs and BSP. Before we wakeup
APs to enable x2APIC mode, we should wait all APs have finished initialization.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 16:20:26 +0000 (00:20 +0800)]
UefiCpuPkg/MpInitLib: Add ApWakeupFunction() executed by assembly code
ApWakeupFunction() is the first C function executed from AP reset vector. When
APs waken up at the first time, it will sync BSP's MTRR setting and load
microcode on APs and collect APs' BIST information.
When AP tasked finished, it will place APs it one loop specified by ApLoopMode.
v5:
1. Rename ApCFunction to ApWakeupFunction to meet naming convention.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Sun, 24 Jul 2016 14:19:09 +0000 (22:19 +0800)]
UefiCpuPkg/MpInitLib: Allocate AP reset vector buffer under 1MB
In PeiMpInitLib, searching unallocated memory under in
EFI_HOB_TYPE_RESOURCE_DESCRIPTOR hobs to find the memory under 1MB for AP reset
vector. After End of PEI event triggered, we need to restore original the buffer
contents to avoid crash the OS on S3 boot.
In DxeMpInitLib, allocate the memory under 1MB for AP reset vector.
Add helper functions AllocateResetVector()/FreeResetVector() used by WakeupAp().
v3:
1. Move SetTimer() from Patch #17 to Patch 16.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Add CPU_VOLATILE_REGISTERS definitions for CRx and DRx required to be restored
after APs received INIT IPI.
Add worker functions SaveVolatileRegisters()/RestoreVolatileRegisters() used to
save/restore CRx and DRx. It also check if Debugging Extensions supported or
not.
v5:
1. Add comment block for structure CPU_VOLATILE_REGISTERS.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 15:33:25 +0000 (23:33 +0800)]
UefiCpuPkg/MpInitLib: Allocate and initialize memory of MP Data buffer
v5:
1. Add comment block for enum AP_INIT_STATE and structure CPU_AP_DATA.
2. Add more comment for structure CPU_INFO_IN_HOB.
3. Add more clarification in structure _CPU_MP_DATA for those fields
pass from PEI to DXE.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 15:32:17 +0000 (23:32 +0800)]
UefiCpuPkg/MpInitLib: Get ApLoopMode and MointorFilter size
Firstly, get ApLoopMode from PcdCpuApLoopMode. If MonitorMwait feature is not
supported, update ApLoopMode to ApHltLoop. If MonitorMwait feature is supported,
get MointorFilter size by CPUID.[EAX=05H]:EBX.BIT0-15.
v5:
1. Add comment block for enum AP_LOOP_MODE.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 14:56:09 +0000 (22:56 +0800)]
UefiCpuPkg/MpInitLib: Add MP_ASSEMBLY_ADDRESS_MAP
In MpInitLibInitialize(), invoke AsmGetAddress() to get get assembly functions'
entry addresses and the sizes from returned MP_ASSEMBLY_ADDRESS_MAP structure.
v5:
1. Add more detailed comments for structure MP_ASSEMBLY_ADDRESS_MAP.
v4:
1. Add AsmRelocateApLoop information return in AsmGetAddress().
v3:
1. Rename AsmRellocateApLoop to AsmRelocateApLoop.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
AsmRelocateApLoop() is used to place APs into MWAIT-loop if MonitorMwait
feature is supported before hand-off to OS, or place APs into HLT-loop if
MonitorMwait feature is not supported.
If the current mode is long mode, we will switch APs to protected mode
before placing APs in MWAIT-loop or HLT-loop. Thus, once APs wakeup from
loop, APs needn't the page table that may be crashed by OS.
v3:
1. Rename AsmRellocateApLoop to AsmRelocateApLoop.
2. Fix typo Proteced to Protected.
3. Fix typo segement to segment
4. Use word MONITOR instead of mwait-monitor.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Fri, 29 Jul 2016 13:13:34 +0000 (21:13 +0800)]
UefiCpuPkg/MpInitLib: Add EnableExecuteDisable in MP_CPU_EXCHANGE_INFO
EnableExecuteDisable in MP_CPU_EXCHANGE_INFO is used to tell AP reset vector if
enable execute disable feature on APs. This feature should be enabled before CR3
is written.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 14:44:39 +0000 (22:44 +0800)]
UefiCpuPkg/MpInitLib: Add AP assembly code and MP_CPU_EXCHANGE_INFO
Add assembly code for AP reset vector and the definition of MP_CPU_EXCHANGE_INFO
that are used to exchange the data between C code and assembly code when AP wake
up.
v4:
1. Copy MP_CPU_EXCHANGE_INFO from UefiCpuPkg/CpuMpPei/CpuMpPei.h
2. Copy MpEqu.inc and MpFuncs.nasm from UefiCpuPkg/CpuMpPei.
v3:
1. Rename NumApsExecutingLoction to NumApsExecutingLocation
2. Add whitespace after ; in .nasm file
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 13:56:58 +0000 (21:56 +0800)]
UefiCpuPkg/MpInitLib: Add two instances PeiMpInitLib and DxeMpInitLib
Add two MP Initialize Library instances PeiMpInitLib.inf and DxeMpInitLib.inf
with NULL implementation.
One PeiMpInitLib.inf is consumed by PEI MP driver. Another DxeMpInitLib.inf is
consumed by DXE MP driver.
Place MpInitLibStartupAllAPs()/MpInitLibStartupThisAp()/MpInitLibSwitchBSP()/
MpInitLibEnableDisableAP() into PeiMpLib.c and DxeMpLib.c, because they have
the different implementations and will be updated in latter patches.
v5:
1. Add back PeiExceptionHandlerLib.inf in UefiCpuPkg.dsc. It is removed
incorrectly.
v4:
1. Return EFI_UNSUPPORTED instead of EFI_SUCCESS for NULL implementation of
all Functions.
2. Sync MpInitLibxxx functions header updating described in v4 part of Patch
#4.
v3:
1. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Tue, 19 Jul 2016 01:39:45 +0000 (09:39 +0800)]
UefiCpuPkg/MpInitLib: Add MP Initialize library class definition
MP Initialize library provides basic functionalities to do APs initialization,
to manage MP information and to wakeup APs to execute AP task.
It could be consumed by CPU MP PEI or DXE drivers to provide CPU MP PPI/Protocol
services.
v4:
1. MpInitLibGetProcessorInfo():
Update HealthData type from UINT32 to EFI_HEALTH_FLAGS.
Add #include <Ppi/SecPlatformInformation.h>
2. MpInitLibSwitchBSP():
Return EFI_DEVICE_ERROR instead of EFI_SUCCESS if the calling processor is
an AP.
3. MpInitLibStartupThisAP():
Fix several incorrect references to "APs" to match PI spec.
4. MpInitLibSwitchBSP() and MpInitLibEnableDisableAP():
Fix incorrect description on ProcessorNumber.
5. Trim whitespace at end of line.
v3:
1. Add whitespace after MpInitLibInitialize
2. Rename MpInitLibSwitchBsp to MpInitLibSwitchBSP to match PI spec
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Wed, 20 Jul 2016 14:18:32 +0000 (22:18 +0800)]
UefiCpuPkg/CpuS3DataDxe: Move StartupVector allocation to EndOfDxe()
Currently, we will allocate StartupVector buffer under 1MB at entry point
function. But some modules may allocate some hard code address under 1MB.
For example, LegacyBiosDxe driver tries to manage some legacy range under
640KB.
To avoid the conflicts, we move StartupVector buffer allocation to End Of
DXE event callback function.
v4:
Update the Context parameter is used as a pointer to AcpiCpuDataEx, then
we needn't to add the global variable.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
Jeff Fan [Tue, 19 Jul 2016 01:49:35 +0000 (09:49 +0800)]
UefiCpuPkg/MpInitLib: Add microcode definitions defined in IA32 SDM
Add microcode definitions defined in Intel(R) 64 and IA-32 Architectures
Software Developer's Manual Volume 3A, Section 9.11.
v4:
1. ProcessorSignature type changed to CPU_MICROCODE_PROCESSOR_SIGNATURE
2. Add pack(1) for structure CPU_MICROCODE_HEADER and
CPU_MICROCODE_EXTENDED_TABLE.
v3:
1. Update SDM date to June, 2016
2. Mention BCD format in CPU_MICROCODE_DATE
3. Rename ProcessorChecksum to Checksum to match SDM.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
#define MSR_IA32_APIC_BASE_ADDRESS is duplicated with #define MSR_IA32_APIC_BASE
defined in UefiCpuPkg/Include/Register/ArchitecturalMsr.h, so we could remove it
and update the modules to use MSR_IA32_APIC_BASE from ArchitecturalMsr.h.
Structure MSR_IA32_APIC_BASE conflicts with #define MSR_IA32_APIC_BASE defined
in UefiCpuPkg/Include/Register/ArchitecturalMsr.h, so we could remove it and
update the modules to use structure MSR_IA32_APIC_BASE_REGISTER from
ArchitecturalMsr.h.
v5:
1. Update SourceLevelDebugPkg to use APIC Base MSR from ArchitecturalMsr.h.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Michael Kinney <michael.d.kinney@intel.com>
projects / mirror_edk2.git / log