Ard Biesheuvel [Wed, 15 Nov 2017 15:36:07 +0000 (15:36 +0000)]
EmbeddedPkg Omap35xxPkg: remove EBL and associated libraries
EBL is a deprecated, small memory footprint alternative for the
UEFI Shell that is no longer in use by any platforms in EDK2 or
in edk2-platforms. To avoid confusion, let's remove it from the
tree.
This module is not used anywhere under edk2 or edk2-platforms, so let's
remove it. This removes the only dependency on ArmPlatformLib from ArmPkg.
While at it, remove a mention of ArmPlatformPkg from a comment in the
.dec file as well.
Leif Lindholm [Sat, 25 Nov 2017 13:16:20 +0000 (13:16 +0000)]
EmbeddedPkg: get rid of BdsLib dependency from Android*Boot
The sum use these applications made of BdsLib was one invocation of the
IS_DEVICE_PATH_NODE macro, and (incorrectly) being able to leave out a
dependency on gEfiLoadedImageProtocolGuid.
So expand the macro in place and add the missing dependency.
Then clean up the .dsc, .inf and #includes accordingly.
Gary Lin [Wed, 22 Nov 2017 04:43:56 +0000 (12:43 +0800)]
CryptoPkg/IntrinsicLib: Fix the warning on memset
Gcc issued the warning when compiling CryptoPkg:
CryptoPkg/Library/Include/CrtLibSupport.h:135:17: warning: type of 'memset' does not match original declaration [-Wlto-type-mismatch]
void *memset (void *, int, size_t);
^
CryptoPkg/Library/IntrinsicLib/MemoryIntrinsics.c:27:8: note: type mismatch in parameter 2
void * memset (void *dest, char ch, size_t count)
^
This commit changes the type of ch from char to int to match the
declaration.
Cc: Qin Long <qin.long@intel.com> Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Qin Long <qin.long@intel.com>
Jian J Wang [Thu, 23 Nov 2017 01:48:33 +0000 (09:48 +0800)]
MdeModulePkg/DxeCore: Filter out all paging capabilities
Some OSs will treat EFI_MEMORY_DESCRIPTOR.Attribute as really
set attributes and change memory paging attribute accordingly.
But current EFI_MEMORY_DESCRIPTOR.Attribute is assigned by
value from Capabilities in GCD memory map. This might cause
boot problems. Clearing all paging related capabilities can
workaround it. The code added in this patch is supposed to
be removed once the usage of EFI_MEMORY_DESCRIPTOR.Attribute
is clarified in UEFI spec and adopted by both EDK-II Core and
all supported OSs.
Laszlo did a thorough test on OVMF emulated platform. The details
can be found at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Jian J Wang [Mon, 23 Oct 2017 06:49:02 +0000 (14:49 +0800)]
UefiCpuPkg/CpuDxe: Fix multiple entries of RT_CODE in memory map
More than one entry of RT_CODE memory might cause boot problem for some
old OSs. This patch will fix this issue to keep OS compatibility as much
as possible.
More detailed information, please refer to
https://bugzilla.tianocore.org/show_bug.cgi?id=753
Laszlo did a thorough test on OVMF emulated platform. The details can be found
at
https://bugzilla.tianocore.org/show_bug.cgi?id=753#c10
Cc: Eric Dong <eric.dong@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Jiaxin Wu [Fri, 17 Nov 2017 03:50:11 +0000 (11:50 +0800)]
CryptoPkg/TlsLib: Change the return type of TlsInitialize().
V2:
* Correct the commit log.
Currently, the return code of OPENSSL_init_ssl(0 or 1) and RandomSeed
(TRUE or FALSE) are not checked in TlsInitialize(). Also "VOID" is used
as the return type of TlsInitialize(), which can't be used to capture
the returned value for error handling.
From Long Qin (CryptoPkg owner):
The early version of OPENSSL_init_ssl() use the "VOID" as the return
value, which was updated to "int" later because the function changes
can fail.
So, this patch is to change the return type of TlsInitialize() to
follow up the OPENSSL_init_ssl() update.
Cc: Ye Ting <ting.ye@intel.com> Cc: Long Qin <qin.long@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Long Qin <qin.long@intel.com>
Jian J Wang [Thu, 23 Nov 2017 00:56:46 +0000 (08:56 +0800)]
MdeModulePkg/Core: Fix potential array overflow
In the method DumpGuardedMemoryBitmap() and SetAllGuardPages(), the code
didn't check if the global mMapLevel is legal value or not, which leaves
a logic hole causing potential array overflow in code followed.
This patch adds sanity check before any array reference in those methods.
Cc: Wu Hao <hao.a.wu@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Wu Hao <hao.a.wu@intel.com>
Jian J Wang [Thu, 23 Nov 2017 01:17:49 +0000 (09:17 +0800)]
MdeModulePkg/Core: Add missing header files into inf
The coding style requires that header files must be also added in module's inf
file, as long as they're included by c files. This patch will fix this issue.
Cc: Dandan Bi <dandan.bi@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Jiaxin Wu [Wed, 22 Nov 2017 06:34:30 +0000 (14:34 +0800)]
NetworkPkg/HttpDxe: Fix the incorrect SizeofHeaders in HttpTcpReceiveHeader().
Commit 19bd133562df951ae7ff7e1fff99b11a25b4cb6d is to fix the incorrect SizeofHeaders
returned from HttpTcpReceiveHeader(). But it missed the "\r\n\r\n" calculation, which
will cause the later HttpHeaders parsing failure.
This patch is fix the above issue.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Ard Biesheuvel [Wed, 22 Nov 2017 09:41:44 +0000 (09:41 +0000)]
ArmVirtPkg: create QemuVirtMemInfoLib version for ArmVirtQemu
The QemuVirtMemInfoLib ArmVirtMemInfoLib implementation created for
ArmVirtQemuKernel does exactly what we need for ArmVirtQemu, the only
difference being that the latter is PrePeiCore based, and so it uses
a different method to ensure that PcdSystemMemorySize is set when
ArmVirtGetMemoryMap() is called.
On ArmVirtQemu, we currently abuse the implied ordering guarantees
provided by ArmPlatformLib, by implementing this as follows:
ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf [ArmVirtPkg/ArmVirtQemu.dsc]
InitializeMemory() [ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.c]
ArmPlatformInitializeSystemMemory() [ArmVirtPkg/Library/ArmVirtPlatformLib/Virt.c]
//
// set PcdSystemMemorySize from the DT
//
MemoryPeim() [ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.c]
InitMmu() [ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.c]
ArmPlatformGetVirtualMemoryMap() [ArmVirtPkg/Library/ArmVirtPlatformLib/VirtMem.c]
//
// consume PcdSystemMemorySize
//
Given that we are trying to get rid of ArmPlatformLib, or at least remove
some of these API functions that are never used for their original purpose
by any platforms, we need to move the PCD assignment elsewhere.
So create a PEIM-only version of QemuVirtMemInfoLib especially for
ArmVirtQemu, and add the PCD assignment code to its constructor.
Create a new ArmVirtMemInfoLib for ArmVirtQemuKernel by cloning the
existing ArmPlatformGetVirtualMemoryMap () for this platform,
(ArmQemuRelocatablePlatformLib *not* ArmVirtPlatformLib), and cleaning
it up:
- remove support for uncached DRAM mappings
- replace EFI_D_xxx with DEBUG_xxx throughout
- use a temp variable to hold the top of the physical address space
- use AllocatePool () instead of AllocatePages (), given that we use
160 bytes only, and the memory is never freed.
In a future patch, we will add this library to the ordinary ArmVirtQemu
platform as well.
Clone the existing ArmPlatformGetVirtualMemoryMap () for this platform,
clean it up slightly (by using a static buffer rather than a heap
allocation, and removing the support for uncached DRAM mappings), and
turn it into a new ArmVirtMemInfoLib implementation.
Ard Biesheuvel [Fri, 17 Nov 2017 13:55:17 +0000 (13:55 +0000)]
ArmVirtPkg: introduce ArmVirtMemInfoLib library class
As part of the effort to get rid of ArmPlatformLib (which incorporates
far too many duties in a single library), introduce ArmVirtMemInfoLib
which will be invoked by our ArmVirtMemoryInitPeiLib implementation to
get a description of the virtual address space. This will allow us to
remove this functionality from ArmPlatformLib later, or, in the case of
ArmVirtXen and ArmVirtQemuKernel, drop ArmPlatformLib altogether.
Ard Biesheuvel [Fri, 17 Nov 2017 13:33:15 +0000 (13:33 +0000)]
ArmVirtPkg/ArmVirtPlatformLib: remove support for uncached mappings
QEMU/KVM has very little tolerance for using anything except writeback
cacheable mappings of DRAM, so let's remove the 'feature' that allows
us to select uncached mappings at build time.
ArmPlatformStackLib has hooks into primary/secondary core PCDs and
other ArmPlatformLib related junk, so let's simply set the stack
pointer directly. This is trivial given that our PrePi is unicore
only.
Ard Biesheuvel [Fri, 17 Nov 2017 11:09:44 +0000 (11:09 +0000)]
ArmVirtPkg/PrePi: move DRAM discovery code into PrePi
ArmVirtQemuKernel and ArmVirtXen use essentially the same code to
retrieve DRAM information from the DT /memory node at early boot,
and invoke it via the ArmPlatformPeiBootAction () hook exposed by
ArmPlatformLib. Let's move this code into the PrePi implementation
these platforms share between them (and not with any other platforms)
so we can eliminate another dependency on the messy ArmPlatformLib.
Ard Biesheuvel [Fri, 17 Nov 2017 10:54:59 +0000 (10:54 +0000)]
ArmVirtPkg/PrePi: remove bogus primary core check
QEMU and KVM based ARM/AARCH64 virtual machines only enter UEFI on
a single core, so ArmPlatformIsPrimaryCore() always returns true.
And even if it didn't, our code does absolutely nothing meaningful
based on its return value, so don't bother calling it, and remove
another frivolous dependency on ArmPlatformLib.
Ard Biesheuvel [Mon, 13 Nov 2017 15:09:30 +0000 (15:09 +0000)]
ArmVirtPkg/PrePi: run all library constructors by hand
Instead of invoking the library constructors of some libraries by
hand, invoke the generated function ProcessLibraryConstructorList
in AutoGen.c so all constructors are executed.
Ard Biesheuvel [Tue, 21 Nov 2017 16:02:14 +0000 (16:02 +0000)]
BaseTools/tools_def AARCH64 ARM: suppres PIE sections via linker script
Recent distro builds of GCC 6 enable PIE linking by default, and allow
the previous behavior to be restored by passing the -no-pie command line
argument. Support for this was implemented by commits 1894a7c64c0a and 3380a591232d but unfortunately, it turns out that GCC 5 does not support
this command line argument, and exits with an error.
To avoid the need for yet another toolchain tag, to distinguish between
GCC 5 and GCC 6, let's use our GCC linker scripts when building objects
from .aslc files. This will ensure that the extra sections that are added
by the PIE linker are discarded from the ELF binary, and so they will not
corrupt the resulting .acpi file.
This reverts
1894a7c64c0a BaseTools/tools_def AARCH64 ARM: disable PIE linking 3380a591232d BaseTools/tools_def AARCH64 ARM: disable PIE linking for .aslc sources
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Leo Duran <leo.duran@amd.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Leo Duran [Tue, 31 Oct 2017 17:54:52 +0000 (01:54 +0800)]
PcAtChipsetPkg: Define FixePCD's for RTC register values
Define FixedPCD's to replace macros in RTC driver, to allow
for platform-specific configurations.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Leo Duran <leo.duran@amd.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Done:
if (EFI_ERROR (Status)) {
if (PciIo != NULL && Enabled) {
PciIo->Attributes (
PciIo,
EfiPciIoAttributeOperationSet,
OriginalAttributes,
NULL
);
}
}
In above codes, VS2012/VS2010 will report that "OriginalAttributes"
will be used without initialization. But in fact, when the if expression
is true(if (PciIo != NULL && Enabled)), the "OriginalAttributes" must be
initialized. In order to fix this false positive issue, we initialize the
"OriginalAttributes" after declaration.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Star Zeng [Mon, 20 Nov 2017 07:44:24 +0000 (15:44 +0800)]
MdeModulePkg EhciPei: Minor refinement about IOMMU
This patch is following 2c656af04d7f.
1. Fix typo "XHC" to "EHC".
2. Reinitialize Request(Phy/Map) and Data(Phy/Map)
in Urb, otherwise the last time value of them may
be used in error handling when error happens.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com> Signed-off-by: Michael Turner <michael.turner@microsoft.com> Cc: Michael D Kinney <Michael.d.kinney@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
We met some compatibility issues when doing Windows S4 resume.
Reverting the BME disabling patches to fix the S4 resume issue.
Signed-off-by: Ruiyu Ni <Ruiyu.ni@intel.com> Signed-off-by: Michael Turner <michael.turner@microsoft.com> Cc: Michael D Kinney <Michael.d.kinney@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Ruiyu Ni [Mon, 20 Nov 2017 05:13:25 +0000 (13:13 +0800)]
MdeModulePkg/UefiBootManagerLib: Remove assertion
EfiBootManagerStartHotkeyService() asserts when "BootOptionSupport"
variable doesn't exist.
In fact, though "BootOptionSupport" variable is set in BdsDxe
module, it's possible that the variable is deleted by
PlatformBootManagerBeforeConsole().
The patch removes the assertion and adds code to handle the case.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
If a USB Mass Storage device does not support the Get
Max LUN command, then the USB I/O Protocol ControlTransfer()
service may return an error. If an error is returned for
this command, then assume that the device does not support
multiple LUNs and return a maximum LUN value of 0.
The USB Mass Storage Class Specification states that a
maximum LUN value larger than 0x0F is invalid. Add
a check to make sure this maximum LUN value is in this
valid range, and if it is not, then assume that the
device does not support multiple LUNs and return a
maximum LUN value of 0.
This change improves compatibility with USB FLASH drives
that do not support the Get Max LUN command or return
an invalid maximum LUN value.
Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
The USB I/O Protocol function ControlTransfer() has a DataLength
parameter that specifies the size of the Data buffer. The
UsbBusDxe module implements the USB I/O Protocol using the
services of the USB2 Host Controller Protocol. The DataLength
parameter in the USB2 Host Controller Protocol ControlTransfer()
service is an IN OUT parameter so the number of bytes actually
transferred is returned. Since the USB I/O Protocol
ControlTransfer() service can not return the number of bytes
actually transferred, the only option if the number of bytes
actually transferred is less than the number of bytes requested
is to return EFI_DEVICE_ERROR.
The change fixes an issue with a USB mass storage device that
responds with 0 bytes to the Get MAX LUN command.
Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Yonghong Zhu [Fri, 17 Nov 2017 03:29:19 +0000 (11:29 +0800)]
BaseTools: Fix a bug for single module build with GenC/GenMake option
when build a single module with GenC/GenMake option, currently it will
direct return after create Autogen code files, then it cause MaList is
empty, which cause an incorrect error message is reported.
The Visual Studio older than 2015 doesn't support constant integer
in binary format (0bxxx). This patch changes them to BIT macro to
fix it. This patch also cleans up coding style about unmatched
comment for return value.
Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
This issue is caused by assigning incorrect value to PoolHdr.Size
if the requested size is more than MAX_POOL_SIZE, because the SMM
core will actually allocate page memory instead of pool memory in
this situation.
Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Wu Hao <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Wu Hao <hao.a.wu@intel.com> Tested-by: Wu Hao <hao.a.wu@intel.com>
Yonghong Zhu [Mon, 13 Nov 2017 07:24:17 +0000 (15:24 +0800)]
BaseTools: Fix the bug to collect source files per build rule family
when collect source files list we should also consider build rule
family. BuildRuleFamily may be set to the different one. It will
impact BuildRule and source files in INF file.
Hao Wu [Tue, 14 Nov 2017 03:33:10 +0000 (11:33 +0800)]
MdeModulePkg/UdfDxe: Avoid possible loss track of allocated buffer
In function FindFileEntry():
Instead of using the function parameter 'FileEntry', use a local
variable to store the buffer allocated for disk read operation.
For the below calling stack:
UdfOpenVolume() -> FindRootDirectory() -> FindFileEntry()
In FindFileEntry(), the call to 'DiskIo->ReadDisk()' is possible (e.g.
media change for a CD/DVD ROM device) to trigger a re-install of the
BlockIO(2) protocol which will further lead to a call of the BindingStop()
& BingdingStart() of the UdfDxe driver.
Meanwhile, for the above listed calling stack, the '**FileEntry'
parameter passed into FindFileEntry() is '&PrivFsData->Root'. 'PrivFsData'
is a driver-managed private data, it will be freed in BindingStop() and
re-allocate in BingdingStart().
In such case, if '*FileEntry' is used to store the allocated buffer, the
information will be lost if 'DiskIo->ReadDisk()' triggers a re-install of
the BlockIO(2) protocol. The subsequent call of the FreePool API:
FreePool (*FileEntry);
will cause issues.
This commit uses a local variable to store the allocated buffer.
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Hao Wu [Fri, 13 Oct 2017 07:14:51 +0000 (15:14 +0800)]
MdeModulePkg/PartitionDxe: Merge the discovery of ElTorito into UDF
In order to create all of the children (El Torito standard and UDF) for
a CD/DVD media in an entry of the PartitionDriverBindingStart(), this
commit merges the discovery of the El Torito feature
(PartitionInstallElToritoChildHandles) into function
PartitionInstallUdfChildHandles.
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Paulo Alcantara <pcacjr@zytor.com>
Remove dependencies on gArmTokenSpaceGuid.PcdSystemMemoryBase and
gArmTokenSpaceGuid.PcdSystemMemorySize, the presence of which in
a [FixedPcd] section makes this module unusable for ArmVirtQemu.
Update the Request Sense check for the Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION. For this Sense Key, the
Additional Sense Key to EFI_STATUS mappings are:
A USB flash drive is returning Request Sense Key of
USB_BOOT_SENSE_UNIT_ATTENTION and an Additional Sense Key of
USB_BOOT_ASC_NO_MEDIA for a few seconds before returning an
Additional Sense Key of USB_BOOT_ASC_MEDIA_CHANGE.
The current logic treats this initial Request Sense info as an
error and reties the command 5 times before failing completely.
With this change the USB Flash Drive works correctly.
Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Paolo Bonzini [Thu, 16 Nov 2017 20:31:00 +0000 (21:31 +0100)]
OvmfPkg: save on I/O port accesses when the debug port is not in use
When SEV is enabled, every debug message printed by OVMF to the
QEMU debug port traps from the guest to QEMU character by character
because "REP OUTSB" cannot be used by IoWriteFifo8. Furthermore,
when OVMF is built with the DEBUG_VERBOSE bit (value 0x00400000)
enabled in "gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel", then the
OvmfPkg/IoMmuDxe driver, and the OvmfPkg/Library/BaseMemEncryptSevLib
library instance that is built into it, produce a huge amount of
log messages. Therefore, in SEV guests, the boot time impact is huge
(about 45 seconds _additional_ time spent writing to the debug port).
While these messages are very useful for analyzing guest behavior,
most of the time the user won't be capturing the OVMF debug log.
In fact libvirt does not provide a method for configuring log capture;
users that wish to do this (or are instructed to do this) have to resort
to <qemu:arg>.
The debug console device provides a handy detection mechanism; when read,
it returns 0xE9 (which is very much unlike the 0xFF that is returned by
an unused port). Use it to skip the possibly expensive OUT instructions
when the debug I/O port isn't plugged anywhere.
For SEC, the debug port has to be read before each full message.
However:
- if the debug port is available, then reading one byte before writing
a full message isn't tragic, especially because SEC doesn't print many
messages
- if the debug port is not available, then reading one byte instead of
writing a full message is still a win.
Paolo Bonzini [Thu, 16 Nov 2017 20:30:59 +0000 (21:30 +0100)]
OvmfPkg: create a separate PlatformDebugLibIoPort instance for SEC
The next patch will want to add a global variable to
PlatformDebugLibIoPort, but this is not suitable for the SEC
phase, because SEC runs from read-only flash. The solution is
to have two library instances, one for SEC and another
for all other firmware phases. This patch adds the "plumbing"
for the SEC library instance, separating the INF files and
moving the constructor to a separate C source file.
Laszlo Ersek [Tue, 24 Oct 2017 15:21:25 +0000 (17:21 +0200)]
OvmfPkg: restore temporary SEC/PEI RAM size to 64KB
(1) In the PEI phase, the PCD database is maintained in a GUID HOB. In
OVMF, we load the PCD PEIM before any other PEIMs (using APRIORI PEI),
so that all other PEIMs can use dynamic PCDs. Consequently,
- the PCD GUID HOB is initially allocated from the temporary SEC/PEI
heap,
- whenever we introduce a dynamic PCD to a PEIM built into OVMF such
that the PCD is new to OVMF's whole PEI phase, the PCD GUID HOB (and
its temporary heap footprint) grow.
I've noticed that, if we add just one more dynamic PCD to the PEI
phase, then in the X64 build,
- we get very close to the half of the temporary heap (i.e., 8192
bytes),
- obscure PEI phase hangs or DXE core initialization failures
(ASSERTs) occur. The symptoms vary between the FD_SIZE_2MB and
FD_SIZE_4MB builds of X64 OVMF.
(2) I've found that commit
2bbd7e2fbd4b ("UefiCpuPkg/MtrrLib: Update algorithm to calculate
optimal settings", 2017-09-27)
introduced a large (16KB) stack allocation:
> The patch changes existing MtrrSetMemoryAttributeInMtrrSettings() and
> MtrrSetMemoryAttribute() to use the 4-page stack buffer for calculation.
> ...
> +#define SCRATCH_BUFFER_SIZE (4 * SIZE_4KB)
> ...
> @@ -2207,17 +2462,66 @@ MtrrSetMemoryAttributeInMtrrSettings (
> ...
> + UINT8 Scratch[SCRATCH_BUFFER_SIZE];
(3) OVMF's temp SEC/PEI RAM size has been 32KB ever since commit
7cb6b0e06809 ("OvmfPkg: Move SEC/PEI Temporary RAM from 0x70000 to
0x810000", 2014-01-21)
Of that, the upper 16KB half is stack (growing down), and the lower
16KB half is heap.
Thus, OvmfPkg/PlatformPei's calls to "UefiCpuPkg/Library/MtrrLib", in
QemuInitializeRam(), cause the Scratch array to overflow the entire
stack (heading towards lower addresses), and corrupt the heap below
the stack. It turns out that the total stack demand is about 24KB, so
the overflow is able to corrupt the upper 8KB of the heap. If that
part of the heap is actually used (for example because we grow the PCD
GUID HOB sufficiently), mayhem ensues.
(4) Right after commit 7cb6b0e06809 (see above), there would be no room
left above the 32KB temp SEC/PEI RAM. However, given more recent
commits
45d870815156 ("OvmfPkg/PlatformPei: rebase and resize the permanent
PEI memory for S3", 2016-07-13)
we can now restore the temp SEC/PEI RAM size to the original
(pre-7cb6b0e06809) 64KB. This will allow for a 32KB temp SEC/PEI
stack, which accommodates the ~24KB demand mentioned in (3).
(Prior patches in this series will let us monitor the stack usage in
the future.)
Laszlo Ersek [Wed, 8 Nov 2017 19:32:30 +0000 (20:32 +0100)]
OvmfPkg/Sec/X64: seed the temporary RAM with PcdInitValueInTempStack
This allows the PEI core to report the maximum temporary SEC/PEI stack
usage on the DEBUG_INFO level, in the PeiCheckAndSwitchStack() function
[MdeModulePkg/Core/Pei/Dispatcher/Dispatcher.c]:
I unit-tested this change by transitorily adding an infinite loop right
after the "rep stosq", and dumping the guest's temp SEC/PEI RAM (32KB
currently) while the guest was stuck in the loop. The dump includes one
dword from before and after the temp SEC/PEI RAM:
Laszlo Ersek [Wed, 8 Nov 2017 18:43:21 +0000 (19:43 +0100)]
OvmfPkg/Sec/Ia32: seed the temporary RAM with PcdInitValueInTempStack
This allows the PEI core to report the maximum temporary SEC/PEI stack
usage on the DEBUG_INFO level, in the PeiCheckAndSwitchStack() function
[MdeModulePkg/Core/Pei/Dispatcher/Dispatcher.c]:
I unit-tested this change by transitorily adding an infinite loop right
after the "rep stosd", and dumping the guest's temp SEC/PEI RAM (32KB
currently) while the guest was stuck in the loop. The dump includes one
dword from before and after the temp SEC/PEI RAM:
"Main.asm" calls TransitionFromReal16To32BitFlat (and does some other
things) before it jumps to the platform's SEC entry point.
TransitionFromReal16To32BitFlat enters big real mode, and sets the DS, ES,
FS, GS, and SS registers to offset ("selector") LINEAR_SEL in the GDT
(defined in "UefiCpuPkg/ResetVector/Vtf0/Ia16/Real16ToFlat32.asm"). The
GDT entry ("segment descriptor") at LINEAR_SEL defines a segment covering
the full 32-bit address space, meant for "read/write data".
Document this fact for all the affected segment registers, as output
parameters for TransitionFromReal16To32BitFlat, saying "Selector allowing
flat access to all addresses".
For 64-bit SEC, "Main.asm" calls Transition32FlatTo64Flat in addition,
between calling TransitionFromReal16To32BitFlat and jumping to the SEC
entry point. Transition32FlatTo64Flat enters long mode. In long mode,
segmentation is largely ignored:
- all segments are considered flat (covering the whole 64-bit address
space),
- with the (possible) exception of FS and GS, whose bases can still be
changed, albeit with new methods, not through the GDT. (Through the
IA32_FS_BASE and IA32_GS_BASE Model Specific Registers, and/or the
WRFSBASE, WRGSBASE and SWAPGS instructions.)
Thus, document the segment registers with the same "Selector allowing flat
access to all addresses" language on the "Main.asm" level too, since that
is valid for both 32-bit and 64-bit modes.
(Technically, "Main.asm" does not return, but RBP/EBP, passed similarly to
the SEC entry point, is already documented as an output parameter.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Eric Dong <eric.dong@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Suggested-by: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Ard Biesheuvel [Thu, 16 Nov 2017 17:08:08 +0000 (17:08 +0000)]
ArmPlatformPkg: reorganize PL011 code
The PL011 code in ArmPlatformPkg is organized in a weird way: there is
a single PL011Uart.h header file under Include/Drivers containing both
register definitions and function entry points. The PL011Uart library
itself is in Drivers/ but it is actually a library.
So let's clean this up: add a new PL011UartLib library class and associated
header file containing only the library prototypes, and move the library
itself under Library/ using a new GUID, with the register definitions moved
into a local header file.
Ard Biesheuvel [Thu, 16 Nov 2017 16:51:49 +0000 (16:51 +0000)]
OvmfPkg/XenHypercallLib: enable virt extensions for ARM
XenHypercallLib uses the 'hvc' instruction, which is not implemented
on all ARMv7 CPUs, and so we need to explicitly specify a CPU that
has the virtualization extensions.
This override used to be set at the platform level, but this was removed
in commit 0d36a219c7bdbb27d775b50837823b2a9928147c
('ArmPlatformPkg/PL031RealTimeClockLib: drop ArmPlatformSysConfigLib
reference), under the assumption that all users of the 'hvc' instruction
had already been fixed.
So fix this for GNU binutils by adding the 'virt' arch extension
directive, and for RVCT by setting the --cpu command line option to a
CPU that is virt capable.
Jian J Wang [Tue, 14 Nov 2017 02:56:37 +0000 (10:56 +0800)]
MdeModulePkg/PiSmmCore: Implement heap guard feature for SMM mode
This feature makes use of paging mechanism to add a hidden (not present)
page just before and after the allocated memory block. If the code tries
to access memory outside of the allocated part, page fault exception will
be triggered.
BIT2 and BIT3 of PcdHeapGuardPropertyMask can be used to enable or disable
memory guard for SMM page and pool respectively. PcdHeapGuardPoolType and/or
PcdHeapGuardPageType are used to enable or disable guard for specific type
of memory. For example, we can turn on guard only for EfiRuntimeServicesCode
and EfiRuntimeServicesData by setting the PCD with value 0x60.
Pool memory is not ususally integer multiple of one page, and is more likely
less than a page. There's no way to monitor the overflow at both top and
bottom of pool memory. BIT7 of PcdHeapGuardPropertyMask is used to control
how to position the head of pool memory so that it's easier to catch memory
overflow in memory growing direction or in decreasing direction.
Cc: Eric Dong <eric.dong@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Heap guard makes use of paging mechanism to implement its functionality. But
there's no protocol or library available to change page attribute in SMM mode.
A new protocol gEdkiiSmmMemoryAttributeProtocolGuid is introduced to make it
happen. This protocol provide three interfaces
Since heap guard feature need to update page attributes. The page table
should not set to be read-only if heap guard feature is enabled for SMM
mode. Otherwise this feature cannot work.
Cc: Eric Dong <eric.dong@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Jian J Wang [Tue, 14 Nov 2017 02:55:26 +0000 (10:55 +0800)]
MdeModulePkg/DxeCore: Implement heap guard feature for UEFI
This feature makes use of paging mechanism to add a hidden (not present)
page just before and after the allocated memory block. If the code tries
to access memory outside of the allocated part, page fault exception will
be triggered.
BIT0 and BIT1 of PcdHeapGuardPropertyMask can be used to enable or disable
memory guard for page and pool respectively. PcdHeapGuardPoolType and/or
PcdHeapGuardPageType are used to enable or disable guard for specific type
of memory. For example, we can turn on guard only for EfiBootServicesData
and EfiRuntimeServicesData by setting the PCD with value 0x50.
Pool memory is not ususally integer multiple of one page, and is more likely
less than a page. There's no way to monitor the overflow at both top and
bottom of pool memory. BIT7 of PcdHeapGuardPropertyMask is used to control
how to position the head of pool memory so that it's easier to catch memory
overflow in memory growing direction or in decreasing direction.
Note1: Turning on heap guard, especially pool guard, will introduce too many
memory fragments. Windows 10 has a limitation in its boot loader, which
accepts at most 512 memory descriptors passed from BIOS. This will prevent
Windows 10 from booting if heap guard is enabled. The latest Linux
distribution with grub boot loader has no such issue. Normally it's not
recommended to enable this feature in production build of BIOS.
Note2: Don't enable this feature for NT32 emulation platform which doesn't
support paging.
Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Jian J Wang [Tue, 14 Nov 2017 02:53:28 +0000 (10:53 +0800)]
MdeModulePkg/DxeIpl: Enable paging for heap guard
Heap guard feature needs paging to work properly. 64-bit BIOS uses
PcdDxeIplBuildPageTables to control the page table setup. 32-bit BIOS
has to check heap guard feature to decide enabling paging or not.
Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Jian J Wang [Tue, 14 Nov 2017 02:52:31 +0000 (10:52 +0800)]
UefiCpuPkg/CpuDxe: Reduce debug message
Heap guard feature will frequently update page attributes. The debug message
in CpuDxe driver will slow down the boot performance noticeably. Changing the
debug level to DEBUG_VERBOSE to reduce the message output for normal debug
configuration.
Cc: Eric Dong <eric.dong@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Suggested-by: Ayellet Wolman <ayellet.wolman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Jian J Wang [Tue, 14 Nov 2017 02:51:50 +0000 (10:51 +0800)]
MdeModulePkg/SmmMemoryAttribute.h: Add new protocol definitions
The new protocol gEdkiiSmmMemoryAttributeProtocolGuid is intended for
PiSmmCore to be able to change memory page attributes for the sake of
heap guard feature.
This protocol provides three interfaces to get/set/clear page attribute.
Now that the PL031 RTC driver library no longer depends on the ARM
platform specific ArmPlatformSysConfigLib, we no longer need to
implement ArmPlatform.h or have a resolution for that library.
This allows us to get rid of a rather dodgy practice of including
platform headers using compiler flags, which is a bad idea at various
levels.
Ard Biesheuvel [Wed, 15 Nov 2017 13:04:46 +0000 (13:04 +0000)]
ArmPlatformPkg/PL031RealTimeClockLib: drop ArmPlatformSysConfigLib reference
The PL031 driver implements a VExpress/Juno specific hack to set the
battery backed clock in addition to the PL031. However, none of the
remaining VExpress based hardware we support in EDK2 actuall implements
this feature so we can just remove it, and get rid of the cumbersome
dependency on ArmPlatform.h.
Ard Biesheuvel [Thu, 16 Nov 2017 14:26:27 +0000 (14:26 +0000)]
ArmPkg: move RVCT PLATFORM_FLAGS override into ArmHvcLib/ArmSmcLib
Currently, each ARM platform built with RVCT that uses ArmHvcLib
or ArmSmcLib needs to specify a CPU target that implements both the
security and virtualization extensions, so that the assembler does
not choke on the 'hvc' and 'smc' instructions in ArmHvcLib/ArmSvcLib.
Let's move these overrides into the module .INFs so we can lift this
requirement at the platform side.
Ard Biesheuvel [Tue, 14 Nov 2017 10:13:03 +0000 (10:13 +0000)]
ArmVirtPkg/ArmVirtQemu: use non-accelerated CopyMem for VariableRuntimeDxe
The VariableRuntimeDxe driver may use CopyMem () on NOR flash regions,
assuming such regions always have full memory semantics. Given that
those regions cannot be mapped as ordinary memory on ARM (due to the
fact that the NOR flash requires device semantics while in write mode)
this prevents us from using BaseMemoryLibOptDxe in VariableRuntimeDxe,
since it may use unaligned accesses and/or DC ZVA instructions, both
of which are incompatible with mappings using device semantics.
Note that there is no way we can work around this by changing the
mapping type between 'memory' and 'device' when switching from read to
write mode and back, because the runtime mapping is created by the OS,
and cannot be changed at will.
So let's just switch to the unaccelerated version of BaseMemoryLib which
does not have the same problem.
Fu Siyuan [Wed, 15 Nov 2017 03:11:20 +0000 (11:11 +0800)]
MdeModulePkg/SNP: remove redundant DEBUG print in SNP Transmit.c
This patch is to remove some redundant DEBUG output in SNP transmit function.
In case of return EFI_NOT_READY in PxeTransmit, the SNP driver is indicate
the caller that the transmit queue is full, it's a very common situation druing
transmit, not a critical error. So the patch move the DEBUG lever to EFI_D_NET.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
Benjamin You [Tue, 14 Nov 2017 08:41:13 +0000 (16:41 +0800)]
CorebootModulePkg/CbSupportDxe: Remove duplicated IO Space addition
Since UefiCpuPkg's CpuDxe Driver already adds Local Apic's MMIO space to
GCD, CorebootModulePkg's CbSupportDxe should not do this again. Doing this
again causes error return status from GCD service, and ASSERT (FALSE) with
debug build, so the duplicated addition is removed.
Cc: Maurice Ma <maurice.ma@intel.com> Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Benjamin You <benjamin.you@intel.com> Reviewed-by: Maurice Ma <maurice.ma@intel.com>
The return status of the call to SimpleFileSystem->OpenVolume should be
checked.
It is possible that there is a media change in the device (like CD/DVD
ROM). In such case, the volume root opened and/or the device path opened
previously (also within EfiShellOpenRootByHandle) may be invalid.
This commit adds a check for the result of OpenVolume before subsequently
calling functions like EfiShellGetMapFromDevicePath() &
ConvertEfiFileProtocolToShellHandle().
Historically many drives or medias do not correctly return their value
for block N - which is also referred as last addressable/recorded block.
When they do so, there is still a problem when relying on last recorded
block number returned by SCSI commands READ CAPACITY and READ TRACK
INFORMATION - that is, between block 0 and block N there may be
unwritten blocks which are located outside any track.
That said, the Partition driver was unable to find AVDP at block N on
certain medias that do not either return or report their last recorded
block number correctly.
Apparently there is no official or correct way to find the correct block
number, however tools like the Philips UDF Conformance Tool (udf_test)
apply a correction by searching for an AVDP or VAT in blocks N through
N-456 -- this can be observed by looking at the log reported by udf_test
on those CD/DVD medias. So, if the AVDP or VAT is found, then it sets
the last recorded block number to where AVDP or VAT was located.
With the below setence in UDF 2.60, 6.13.2.2 Background Physical
Formatting:
"... the second AVDP must be recorded after the Background physical
Formatting has been finished..."
Implies that the last recorded block is the one where second AVDP was
recorded.
This patch implements a similar way to correct the last recorded block
number by searching for last AVDP in blocks N-1 through N-512 on those
certain medias, as well as ensure a minimum number of 2 AVDPs found as
specified by ECMA 167 and UDF 2.60 specifications.
Cc: Hao Wu <hao.a.wu@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Reported-by: Hao Wu <hao.a.wu@intel.com> Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Remove extra carriage return that causes formatting
issues.
Cc: Kelly Steele <kelly.steele@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Update logic to not return an error from UsbBootRequestSense()
if a Request Sense command responds with no sense information.
It is legal for a USB mass storage device to respond to a
Request Sense command with a SenseKey of
USB_BOOT_SENSE_NO_SENSE and an Additional Sense
Code of USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION.
This is described in Section 3.3 of the Universal Serial
Bus Mass Storage Specification For Bootability:
The previous logic returned an error of EFI_NO_RESPONSE
and this caused USB mass storage devices such as a USB
floppy drive to not be detected.
Cc: Star Zeng <star.zeng@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Bell Song <binx.song@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Bell Song <binx.song@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Bell Song <binx.song@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Bell Song <binx.song@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>