Olivier Martin [Mon, 24 Mar 2014 15:26:22 +0000 (15:26 +0000)]
ArmPkg/ArmLib: Renamed Cp15CacheInfo into ArmCacheInfo
CTR (Cache Type Register) has the same format on ARMv7 and AArch64.
Renaming Cp15CacheInfo() into ArmCacheInfo() makes this function
architecture independent.
Laszlo Ersek [Sat, 22 Mar 2014 07:14:09 +0000 (07:14 +0000)]
OvmfPkg: PlatformDxe: connect RouteConfig() to platform data
Establish the full stack of conversions when modifying the platform
configuration:
ConfigResp -- form engine / HII communication
|
[ConfigToBlock]
|
v
MAIN_FORM_STATE -- binary representation of form/widget state
|
[FormStateToPlatformConfig]
|
v
PLATFORM_CONFIG -- accessible to DXE and UEFI drivers
|
[PlatformConfigSave]
|
v
UEFI non-volatile variable -- accessible to external utilities
Laszlo Ersek [Sat, 22 Mar 2014 07:13:44 +0000 (07:13 +0000)]
OvmfPkg: QemuVideoDxe: serialize Start() against callbacks
If Start() succeeds, the callback is only executed when the setup is
complete (on the stack of RestoreTPL()), rather than on the stack of
InstallMultipleProtocolInterfaces(), when the driver setup may yet be
theoretically incomplete.
If Start() fails, the protocol interface will have been uninstalled
(rolled back) by the time the callback runs (again, on the stack of
RestoreTPL()). Since protocol notification callbacks begin with locating
the protocol interface in question, such attempts to locate will fail
immediately and save some work in the callback.
Laszlo Ersek [Sat, 22 Mar 2014 07:13:31 +0000 (07:13 +0000)]
OvmfPkg: PlatformDxe: add form widgets for video modes
In this patch we populate the form with the two widgets related to video
resolution:
- A read-only string field displaying the preference for the next boot.
- A drop-down list offering choices for changing the setting. This list is
implemented with dynamically generated IFR opcodes.
(In general, the current preference may be missing, or it may be invalid
for the available video RAM size. The list of possible new settings is
filtered with the video RAM size.)
Because the form now becomes able to receive input, we must also implement
ExtractConfig(). This function tells the HII engine about the state of the
widgets.
For now we set up both widgets with static data only:
- The current preference always says "Unset". The driver code is still
isolated from the backend (the UEFI variable store).
- The list of possible resolutions offers 800x600 only. We don't
interrogate the GOP yet.
Laszlo Ersek [Sat, 22 Mar 2014 07:13:24 +0000 (07:13 +0000)]
OvmfPkg: PlatformDxe: introduce state for the main form
We'll need a C language (ie. structure) representation for the state of
the visual elements on the form. We choose the Buffer Storage kind (see
29.2.5.6 "Storage" in UEFI 2.4A), because it's easy to work with.
Note that the structure added in this patch has nothing to do with UEFI
non-volatile variables.
Laszlo Ersek [Sat, 22 Mar 2014 07:13:09 +0000 (07:13 +0000)]
OvmfPkg: PlatformDxe: set preferred video resolution from platform config
The GraphicsConsoleDxe driver (in MdeModulePkg/Universal/Console)
determines the preferred video resolution from the dynamic PCDs
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution
Setting the graphics resolution during boot is useful when the guest OS
(for lack of a dedicated display driver) continues to work with the
original GOP resolution and framebuffer.
Laszlo Ersek [Sat, 22 Mar 2014 07:13:02 +0000 (07:13 +0000)]
OvmfPkg: PlatformDxe: utility functions for saving / loading configuration
The two functions introduced here allow the saving and loading of platform
configuration to/from the non-volatile variable store.
The PLATFORM_CONFIG structure and the two functions that take it / return
it are generally meant for any DXE or UEFI driver that needs to access
platform configuration. For now we keep this small "library" internal to
PlatformDxe.
The PLATFORM_CONFIG wire format is intended only to grow over time (as
long as the variable GUID remains unchanged). At the introduction of new
fields, new feature flags must be added, and recognized in
PlatformConfigLoad().
Laszlo Ersek [Sat, 22 Mar 2014 07:12:46 +0000 (07:12 +0000)]
OvmfPkg: introduce gOvmfPlatformConfigGuid
This GUID should become a new "namespace" for UEFI variables that are
specific to OVMF configuration (as opposed to standard UEFI global
variables). We'll also use it as the GUID of the related HII form-set (ie.
the interactive user interface).
Laszlo Ersek [Sat, 22 Mar 2014 07:12:36 +0000 (07:12 +0000)]
OvmfPkg: non-null PcdLib instance for GraphicsConsoleDxe
GraphicsConsoleDxe (a UEFI_DRIVER under MdeModulePkg/Universal/Console)
determines the preferred video resolution from the dynamic PCDs
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution
- gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution
In one of the next patches, we'd like to change these PCDs. In order for
GraphicsConsoleDxe to retrieve the new values dynamically,
- it must be linked with the non-null instance of PcdLib,
- OvmfPkg must provide dynamic defaults.
We keep MdeModulePkg's 800x600 default resolution. (The UEFI specification
requires video drivers to support 800x600.)
leroy.p.leahy [Thu, 20 Mar 2014 22:05:51 +0000 (22:05 +0000)]
Fix TCP4/TCP6 connections. Connections were transitioning into the connected state and the polling was returning an error. Fix the polling routine to return success in this case.
Fu Siyuan [Thu, 20 Mar 2014 06:04:50 +0000 (06:04 +0000)]
Use PXE_OPFLAGS_STATION_ADDRESS_WRITE when setting new MAC address for the NIC in SNP driver. Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Dong, Guo <guo.dong@intel.com> Reviewed-by: Jin, Eric <eric.jin@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Elvin Li [Wed, 19 Mar 2014 02:42:36 +0000 (02:42 +0000)]
Did proper error handling when SetVariable failed, and put RTC write operation at the behind of SetVariable, if SetVariable failed, RTC content could not be changed.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Elvin Li <elvin.li@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15338 6f19259b-4bc3-4df7-8a09-765794883524
Ruiyu Ni [Mon, 17 Mar 2014 08:24:07 +0000 (08:24 +0000)]
Do not reset system when the MemoryTypeInformation variable cannot be written.
Remove the RT attribute for the MemoryTypeInformation variable because it’s not necessary.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15333 6f19259b-4bc3-4df7-8a09-765794883524
The Boot#### variables that have become unreferenced in the new BootOrder
variable won't ever be automatically reused for booting. They are
"unreachable" resources that take up room in the variable store. Make an
effort to remove them.
This should plug the leak which, given sufficient reboots, exhausts the
variable store with stale Boot#### variables and renders the VM
unbootable.
Reported-by: Michael Chang <mchang@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15327 6f19259b-4bc3-4df7-8a09-765794883524
When PI can distinguish the "full config" boot mode from "assume no
changes", then the following BDS logic is correct:
if BootMode == BOOT_WITH_FULL_CONFIGURATION:
//
// connect all devices
// create & append each default boot option that's missing
//
BdsLibConnectAll
BdsLibEnumerateAllBootOption
else if BootMode == BOOT_ASSUMING_NO_CONFIGURATION_CHANGES:
//
// just stick with current BootOrder and the Boot#### variables
// referenced by it
//
In theory, the first branch is intended to run infrequently, and the
"assume no changes" branch should run most of the time.
However, some platforms can't tell these two boot modes apart. The
following substitute had been introduced:
//
// Technically, always assume "full config", but the BootMode HOB is
// actually meaningless wrt. to "full config" or "assume no changes".
//
ASSERT (BootMode == BOOT_WITH_FULL_CONFIGURATION);
//
// Key off the existence of BootOrder. Try to prepare an in-memory list
// of boot options, based on BootOrder and the referenced Boot####
// variables.
//
Status = BdsLibBuildOptionFromVar()
//
// If that succeeded, we'll treat it as "assume no changes". If it
// failed (*only* if it failed), we'll build default boot options,
// calling it "full config":
//
if EFI_ERROR(Status):
BdsLibConnectAll()
BdsLibEnumerateAllBootOption(BootOptionList)
What we have now in OVMF is a mixture of the hack, and the behavior that's
theoretically correct for "full config":
- We assert "full config" -- this is OK.
- We call "connect all" and "enumerate all" deliberately -- this is OK
too. It matches "full config" which we assert.
- However, we also have the hack in place, which had been meant as an
alternative.
In order to clean this up, we either need to restore the hack to its
original form (ie. comment out the unconditional calls again), or we ought
to remove the hack altogether.
The unconditional "connect all" + "enumerate all" calls are the correct
approach for OVMF, because we want, in fact, to start with "full config".
The QEMU boot order specification and the set of emulated devices might
change "out of band", which excludes "assume no changes".
In other words, removing the hack corresponds to the "real production"
case that the comment hints at.
Because SetBootOrderFromQemu() may change the BootOrder NvVar, we must
preserve the BdsLibBuildOptionFromVar() function call, in order to
refresh the in-memory list with the new boot priorities.
(The last step of BdsLibEnumerateAllBootOption() is such a call too.)
Ryan Harkin [Wed, 12 Mar 2014 17:24:48 +0000 (17:24 +0000)]
ArmPlatformPkg/Bds: stop inputting more characters when string is full
If EditHIInputStr() is called, say with a MaxCmdLine of 2, the user is
currently allowed to enter 2 characters.
If the second character is a carriage return/line feed, this is
substituted with a NULL and the function returns.
If the second character is a regular character, the loop terminated and
the function returns. However, the buffer has not been NULL terminated.
This patch prevents the user from entering a regular character as the
final character and ensures that the only way out of the input is by
pressing ESC or ENTER (or equivalent).
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15325 6f19259b-4bc3-4df7-8a09-765794883524
Brendan Jackman [Mon, 10 Mar 2014 18:13:13 +0000 (18:13 +0000)]
ShellPkg: ShellCommands/SetVar: Make '-rt' imply '-bs'
It's invalid to set a variable that's available from runtime services but not
from boot services.
Currently if you pass '-rt' without '-bs' you get a generic
'Invalid Parameter' message. We should either print a more useful message in
this case, or make '-rt' imply '-bs' (as this patch does). The Shell Spec is
ambiguous on the matter.
jyao1 [Fri, 7 Mar 2014 03:07:09 +0000 (03:07 +0000)]
Remove unused variable attribute flag.
Signed off by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed by: Jeff Fan <jeff.fan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Contributed-under: TianoCore Contribution Agreement 1.0
Shumin Qiu [Fri, 7 Mar 2014 01:06:37 +0000 (01:06 +0000)]
1.Add code to check the pointer 'CorrectedPath' in Ls.c line 460 before referenced. 2.Not use explicit comparisons to TRUE or FALSE for Boolean variable in Ls.c. 3.Add doxygen tags in comment and return type for 'ToLower' in ShellProtocol.c.
Daryl McDaniel [Fri, 7 Mar 2014 01:05:30 +0000 (01:05 +0000)]
StdLib: Modify the memory allocation routines to not be dependent upon the internal structure of the EDK II memory pool.
StdLib/LibC/StdLib/Malloc.c
Create a private data structure, CPOOL_HEAD, which contains housekeeping information for StdLib’s memory allocation functions. An instance of this structure is prepended to every chunk of allocated memory. The structure links the allocation into a doubly-linked list and keeps track of the size of each allocation unit. This information is then available for use by the realloc function.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Daryl McDaniel <daryl.mcdaniel@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com> Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com> Reviewed-by: Rosenbaum, Lee G <lee.g.rosenbaum@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15319 6f19259b-4bc3-4df7-8a09-765794883524
Mike Maslenkin [Wed, 5 Mar 2014 08:45:13 +0000 (08:45 +0000)]
The size of platform memory above 1M is measured in kilobytes.
This patch fixes truncation of this value. Actually 0 Mb memory size was set by reason of overflow of 16 bit word caused by wrong value used.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Mike Maslenkin <mihailm@parallels.com> Reviewed-by: Elvin Li <elvin.li@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@15318 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Tue, 4 Mar 2014 08:04:13 +0000 (08:04 +0000)]
OvmfPkg: S3 Resume: pull in BootScriptExecutorDxe
This driver (from
"MdeModulePkg/Universal/Acpi/BootScriptExecutorDxe/BootScriptExecutorDxe.inf")
is first loaded normally during DXE. When the
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver (purely
as a form of notification), the driver reloads itself to reserved memory.
During S3 Resume / PEI, the driver image is executed from there. In order
to access the boot script saved during S3 Suspend, LockBox access is
needed.
The boot script is transferred internal to PiDxeS3BootScriptLib:
Both S3SaveStateDxe and BootScriptExecutorDxe are statically linked
against PiDxeS3BootScriptLib. Whichever is loaded first (during normal
boot, in the DXE phase), allocates the root storage for the script. The
address is then passed between the PiDxeS3BootScriptLib instances living
in the two separate drivers thru the dynamic
PcdS3BootScriptTablePrivateDataPtr PCD.
Laszlo Ersek [Tue, 4 Mar 2014 08:04:04 +0000 (08:04 +0000)]
OvmfPkg: S3 Resume: fake LockBox protocol for BootScriptExecutorDxe
BootScriptExecutorDxe, to be pulled in in the next patch, was written with
the SMM implementation of LockBox in mind. That implementation is split in
the following three parts:
- client side (DXE/PEI) library,
- SMM driver producing gEfiLockBoxProtocolGuid,
- driver side (SMM) library.
BootScriptExecutorDxe includes the client side LockBoxLib. So that the
library can communicate with the SMM LockBox driver, BootScriptExecutorDxe
has a Depex on gEfiLockBoxProtocolGuid, normally installed by the SMM
LockBox driver. This is actually not a hard dependency, it just ensures
correct load order between BootScriptExecutorDxe and
MdeModulePkg/Universal/LockBox/SmmLockBox.
The (client side) LockBox library instance in OVMF doesn't depend on a
separate driver that produces gEfiLockBoxProtocolGuid. Nothing produces
that GUID right now in OVMF. This prevents BootScriptExecutorDxe from
loading.
Install gEfiLockBoxProtocolGuid in our only S3-specific, custom DXE
driver, in order to enable loading of BootScriptExecutorDxe.
Laszlo Ersek [Tue, 4 Mar 2014 08:03:56 +0000 (08:03 +0000)]
OvmfPkg: S3 Suspend: save boot script after ACPI context
The trigger to actually save the boot script is the installation of
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL, to be performed by any DXE driver.
Installation of the protocol also locks down SMM (as its name indicates)
and (in theory) prevents further LockBox access.
We cannot install this protocol before BdsLibBootViaBootOption() is called
(eg. in OVMF's PlatformBdsPolicyBehavior()), because
BdsLibBootViaBootOption() calls EFI_ACPI_S3_SAVE_PROTOCOL.S3Save(), which
needs LockBox access.
We also can't install the protocol after BdsLibBootViaBootOption()
returns, simply because control is never returned to us.
Therefore modify our EFI_ACPI_S3_SAVE_PROTOCOL implementation so that the
boot script is prepared and installed internally to S3Save().
(The boot script must contain at least one opcode, otherwise
S3BootScriptLib runs into an assertion failure. We add a harmless (no-op)
"information" opcode.)
Laszlo Ersek [Tue, 4 Mar 2014 08:03:50 +0000 (08:03 +0000)]
OvmfPkg: S3 Suspend: enable creation/saving of an S3 Boot Script
"MdeModulePkg/Universal/Acpi/S3SaveStateDxe/S3SaveStateDxe.inf" produces
the EFI_S3_SAVE_STATE_PROTOCOL which allows creation and saving of an S3
Boot Script, to be replayed in PEI during S3 Resume. The script contains
opcodes and opcode arguments to configure CPU, PCI and IO resources.
S3SaveStateDxe relies on the S3BootScriptLib library. The Null
implementation is not useful for actually saving the boot script, we need
the PiDxeS3BootScriptLib instance.
The PiDxeS3BootScriptLib library instance depends on LockBoxLib,
implemented for OVMF in one of the previous patches.
PiDxeS3BootScriptLib also depends on SmbusLib. For now we opt for the Null
instance of the latter. It means that SMBus commands in the boot script
will have no effect when interpreted during S3 Resume. This should be fine
for OvmfPkg and QEMU.
When the EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed by any DXE driver
(purely as a form of notification), the S3SaveStateDxe driver saves the
boot script to EfiACPIMemoryNVS, and links it into the LockBox.
Laszlo Ersek [Tue, 4 Mar 2014 08:03:38 +0000 (08:03 +0000)]
OvmfPkg: S3 Suspend: save ACPI context
"OvmfPkg/AcpiS3SaveDxe/AcpiS3SaveDxe.inf" (originally:
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf")
produces the EFI_ACPI_S3_SAVE_PROTOCOL.
When found, this protocol is automatically invoked by
BdsLibBootViaBootOption(), in file
"IntelFrameworkModulePkg/Library/GenericBdsLib/BdsBoot.c", right before
booting a boot option, to save ACPI S3 context.
At that point during BDS, our AcpiPlatformDxe driver will have installed
the FACS table (which AcpiS3SaveDxe has a use-time dependency upon).
With regard to dependencies: AcpiS3SaveDxe implements
EFI_ACPI_S3_SAVE_PROTOCOL by relying on LockBoxLib.
Laszlo Ersek [Tue, 4 Mar 2014 08:03:31 +0000 (08:03 +0000)]
OvmfPkg: S3 Suspend: import specialized copy of AcpiS3SaveDxe
"IntelFrameworkModulePkg/Universal/Acpi/AcpiS3SaveDxe/AcpiS3SaveDxe.inf"
currently specifies a DepEx on gEfiMpServiceProtocolGuid (MP Services).
The justification is the following code sequence:
InstallAcpiS3Save()
if PcdFrameworkCompatibilitySupport is set:
InstallAcpiS3SaveThunk()
if EFI_MP_SERVICES_PROTOCOL is available:
GetVariable(ACPI_GLOBAL_VARIABLE)
In English, the AcpiS3SaveDxe driver insists on the presence of MP
Services *unconditionally* because,
- if PcdFrameworkCompatibilitySupport is set (the default is false),
- and MP Services are available (which is constant true under the above
condition),
then the AcpiS3SaveDxe driver would like to get the ACPI_GLOBAL_VARIABLE
variable from the MP Services driver, rather than setting it itself.
The DepEx prevents AcpiS3SaveDxe from loading under OvmfPkg, since we
provide no MP Services implementation. This is particularly broken since
the default PcdFrameworkCompatibilitySupport value is FALSE, making the
entire code that would look at EFI_MP_SERVICES_PROTOCOL dead.
Copy AcpiS3SaveDxe to OvmfPkg, substitute PcdFrameworkCompatibilitySupport
with constant FALSE, and remove all code that becomes dead, including the
DepEx.
Laszlo Ersek [Tue, 4 Mar 2014 08:03:23 +0000 (08:03 +0000)]
OvmfPkg: implement LockBoxLib
The S3 suspend/resume infrastructure depends on the LockBox library class.
The edk2 tree currently contains Null and SMM instances. The Null instance
is useless, and the SMM instance would require SMM emulation by including
the SMM core and adding several new drivers, which is deemed too complex.
Hence add a simple LockBoxLib instance for OVMF.
jordan.l.justen@intel.com:
* use PCDs instead of EmuNvramLib
- clear memory in PlatformPei on non S3 boots
* allocate NVS memory and store a pointer to that memory
- reduces memory use at fixed locations
Laszlo Ersek [Tue, 4 Mar 2014 08:03:06 +0000 (08:03 +0000)]
OvmfPkg: S3 Resume: pull in PEIM orchestrating S3 Resume
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume2Pei.inf" produces the
EFI_PEI_S3_RESUME2 PEIM-to-PEIM Interface.
When the platform-specific initialization code (in PEI) sets the Boot Mode
to BOOT_ON_S3_RESUME, the DXE IPL (which is the last step in PEI) skips
the DXE phase entirely, and executes the S3 Resume PEIM through the
EFI_PEI_S3_RESUME2 interface instead. (See DxeLoadCore() in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c".)
Jordan Justen [Tue, 4 Mar 2014 08:02:59 +0000 (08:02 +0000)]
OvmfPkg/PlatformPei: Allocate PEI FV as ACPI NVS if S3 is supported
On S3 resume, we skip decompression of the PEI FV, and expect
to jump directly into it. For this to work, we need the OS to
leave the memory range untouched.
Laszlo Ersek [Tue, 4 Mar 2014 08:02:52 +0000 (08:02 +0000)]
OvmfPkg: PlatformPei: reserve early page tables on X64
On X64, the reset vector code in
"OvmfPkg/ResetVector/Ia32/PageTables64.asm" identity maps the first 4GB of
RAM for PEI, consuming six frames starting at 8MB.
This range is declared by the PcdOvmfSecPageTablesBase/Size PCDs.
Jordan Justen [Tue, 4 Mar 2014 08:02:30 +0000 (08:02 +0000)]
OvmfPkg/PlatformPei: Skip various items for S3 resume
We will not be running DXE on S3 resume, so we don't
need to do these initialization items:
* Reserve EMU Variable memory range
* Declare Firmware volumes
* Add memory HOBs
v5:
* Move MiscInitialization back to running on S3 resume
because the compatibility framebuffer can't cover more than half of PCI
BAR #0. The latter defaults to 64MB in size, and is controlled by
"ram_size_mb".
The field name "ModeNumber" in QEMU_VIDEO_MODE_DATA is misleading -- it is
not immediately obvious whether this field carries a client-visible mode
number, in the GOP sense, or an internal, card type specific mode index.
After checking all references, rename the field to "InternalModeIndex".
Also, when filling in the card type independent QEMU_VIDEO_MODE_DATA array
from the card type specific mode array, distinguish the GOP mode number
from the internal mode index in the debug message.
Currently, QemuVideoGraphicsOutputQueryMode() reports EFI_NOT_STARTED when
this boolean field is set.
However, QemuVideoGraphicsOutputQueryMode() is only available to callers
after the GOP interface has been installed. That in turn implies that the
following partial call tree has succeeded without errors:
Laszlo Ersek [Mon, 3 Mar 2014 08:40:35 +0000 (08:40 +0000)]
OvmfPkg: QemuVideoDxe: disentangle UEFI driver model use in Stop()
A bus driver needs to pay attention whether its Stop() function is being
called on the "main" controller handle (NumberOfChildren == 0) or on the
child handles (NumberOfChildren > 0).
In QemuVideoDxe, all our resources are associated with the one child
handle (and the Private data structure) *except* the top-level PciIo
protocol reference. Be conscious of which mode Stop() is being called for.
Laszlo Ersek [Mon, 3 Mar 2014 08:40:28 +0000 (08:40 +0000)]
OvmfPkg: QemuVideoDxe: simplify UEFI driver model use in Supported() / Start()
A bus driver is allowed to ignore the actual value of RemainingDevicePath
in Supported() and Start(), and to produce all child handles at once.
This in effect means the following invariants for QemuVideoDxe:
- (RemainingDevicePath == NULL), and
- (Private->GopDevicePath != NULL)
Simplify Supported() and Start() by substituting constant TRUE and FALSE
(as appropriate) in expressions that check RemainingDevicePath and/or
Private->GopDevicePath.
In QemuVideoGraphicsOutputConstructor(), called by Start():
- supplement missing error checks:
- QemuVideoGraphicsOutputSetMode() retval (it can fail with
out-of-resources)
In QemuVideoCirrusModeSetup() and QemuVideoBochsModeSetup(), both called
by Start():
- supplement missing error checks:
- AllocatePool() can fail in both
In QemuVideoGraphicsOutputDestructor(), called by Start() on the error
path:
- plug leaks:
- free Private->LineBuffer, which is allocated in
Start() -> Constructor() -> SetMode()
In QemuVideoGraphicsOutputSetMode(), called by Start() indirectly:
- remove redundant zero-assignment to:
- Private->LineBuffer
Olivier Martin [Sat, 1 Mar 2014 11:00:07 +0000 (11:00 +0000)]
ArmPkg/ArmLib: Rationalise ArmReadMidr and cognate functions.
The function ArmReadMidr has been recently added, but that functionality was
already present under other names such as Cp15IdCode and ArmMainIdCode. This
change removes redundant code and moves the function to the Common library.
Olivier Martin [Sat, 1 Mar 2014 10:57:55 +0000 (10:57 +0000)]
ArmPkg: Replace single dead loop.
Several assembler macros use a loop at the label "dead" to trap an error.
This is difficult to debug as there is no indication of how one arrived at the loop.
This change replaces dead with distinct loops locally in the macro,
which means the cause of the hang is detectable to the debugger.
projects / mirror_edk2.git / log