Hao Wu [Wed, 27 Apr 2016 05:15:24 +0000 (13:15 +0800)]
MdeModulePkg NvmExpressDxe: Add BlockIo2 support
Together with EFI_BLOCK_IO_PROTOCOL, EFI_BLOCK_IO2_PROTOCOL is also
produced on NVMe devices.
The following Block I/O 2 functions are implemented:
Reset
ReadBlocksEx
WriteBlocksEx
FlushBlocksEx
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Dong, Eric [Wed, 18 May 2016 06:52:26 +0000 (14:52 +0800)]
MdeModulePkg BootManagerUiLib: Remove invalid keyword "bds".
In current code, BootManagerUiLib is not BDS scope.
So we remove bds keyword in the function name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dong, Eric [Wed, 18 May 2016 06:52:25 +0000 (14:52 +0800)]
BootMaintenanceManagerUiLib: Remove invalid keyword "bds"
In current code, BootMaintenanceManagerUiLib is not BDS scope.
So we remove bds keyword in the function name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Eric Dong [Wed, 18 May 2016 06:52:24 +0000 (14:52 +0800)]
MdeModulePkg UiApp: Remove invalid keyword "bds" in UiApp.
In current code, UiApp is not the BDS scope. So we remove the bds
keyword in the function name.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dong, Eric [Wed, 18 May 2016 05:12:41 +0000 (13:12 +0800)]
BootMaintenanceMangerUiLib: Save mode info for later use.
In current code, we use different output modes for boot phase
and setup phase. When split BootMaintenanceMangerUiLib from
UiApp code, we not add logic to save the boot phase mode info
which will be used later. This change add this logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dong, Eric [Wed, 18 May 2016 05:12:40 +0000 (13:12 +0800)]
MdeModulePkg BootManagerUiLib: Save mode info for later use.
In current code, we use different output modes for boot phase
and setup phase. When split BootManagerUiLib from UiApp code,
we not add logic to save the boot phase mode info which will
be used later. This change add this logic.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Cinnamon Shia [Fri, 13 May 2016 04:24:59 +0000 (12:24 +0800)]
SecurityPkg/DxeImageVerificationLib: Add DEBUG messages for image verification failures
Add DEBUG messages in DxeImageerificationLib to help debug Secure Boot image verification failures
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Cinnamon Shia <cinnamon.shia@hpe.com>
Reviewed-by: Samer EL-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Zhang, Chao B [Tue, 17 May 2016 07:35:21 +0000 (15:35 +0800)]
MdeModulePkg: PeiCore: Fix PEI Multiple Sub-FV Support issue
FirmwareVolmeInfoPpiNotifyCallback is re-enterable during FV process. Since PrivateData->FVCount increases when processing each sub FVs, need to cache Parent FV count in stack before processing any sub FV.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Gao Liming <liming.gao@intel.com>
Maurice Ma [Wed, 18 May 2016 23:27:07 +0000 (16:27 -0700)]
CorebootModulePkg: Use PCD for memory type information initialization
CorebootModulePkg currently uses a hardcoded table for memory type
initialization. It might need to be adjusted by platform to reduce
the memory fragmentation. So changing to use PCDs rather than
constant values to facilitate the customization.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Dandan Bi [Tue, 17 May 2016 03:25:34 +0000 (11:25 +0800)]
MdeModulePkg/UiApp: Exit function when parameter is unsupported or invalid
When the parameter is unsupported or invalid,
should exit the function.
Cc: Qiu Shumin <shumin.qiu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Ma, Maurice [Mon, 16 May 2016 21:26:06 +0000 (05:26 +0800)]
MdeModulePkg: Skip invalid bus number scanning in PciBusDxe driver
When PcdPciDisableBusEnumeration is enabled, the PciBus driver
might get into a dead loop if the secondary bus register on PCI
bridge is not programmed or programmed improperly. Adding this
check to avoid any potential dead loop caused by this.
Cc: Feng Tian <feng.tian@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Lee Leahy <Leroy.p.leahy@intel.com>
Eric Dong [Tue, 17 May 2016 06:00:06 +0000 (14:00 +0800)]
BootMaintenanceManagerUiLib: Rollback changes for BootNext.
Commit
a85be3ae48a8aaa40b755cd0ff7270c67cfed585 imports errors for
BootNext question, this patch rollback the related changes.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Zenith432 [Mon, 16 May 2016 15:52:21 +0000 (23:52 +0800)]
BaseTools: Eliminate two shift-negative-value in FvLib.c
clang 3.8 flags -Wshift-negative-value warning, which turns fatal due to
use of -Werror.
Fixes: https://github.com/tianocore/edk2/issues/49
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Zenith432 [Mon, 16 May 2016 15:50:06 +0000 (23:50 +0800)]
MdePkg: Reinitialize twice-iterated VA_LIST in variadic function UefiDevicePathLibCatPrint()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Zenith432 [Mon, 16 May 2016 15:49:12 +0000 (23:49 +0800)]
MdeModulePkg: Terminate two unterminated VA_COPYs in CheckRemainingSpaceForConsistencyInternal()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dong, Eric [Tue, 17 May 2016 02:12:12 +0000 (10:12 +0800)]
MdeModulePkg UiApp: Add "Enter Setup" status code.
The original BdsDxe driver has "Enter Setup" status code
while current code not. This patch restores it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Pedroa Liu [Mon, 16 May 2016 12:48:41 +0000 (20:48 +0800)]
ShellPkg: Fix the incorrect behavior when pressing 'shift' key.
If 'ReadKeyStroke' function return EFI_NOT_READY then skip it.
If the return value is EFI_DEVICE_ERROR clean the currentString buffer.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pedroa Liu <pedroa.liu@insyde.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Yonghong Zhu [Tue, 10 May 2016 09:58:26 +0000 (17:58 +0800)]
BaseTools: support private package definition
EDKII build spec and DEC spec updated to support private package
definition.
If GUID, Protocol or PPI is listed in a DEC file, where the Private
modifier is used in the section tag ([Guids.common.Private] for example),
only modules within the package are permitted to use the GUID, Protocol
or PPI. If a module or library instance outside of the package attempts
to use the item, the build must fail with an appropriate error message.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Laszlo Ersek [Mon, 9 May 2016 20:54:36 +0000 (22:54 +0200)]
OvmfPkg/PlatformPei: provide 10 * 4KB of PCI IO Port space on Q35
This can accommodate 10 bridges (including root bridges, PCIe upstream and
downstream ports, etc -- see
<https://bugzilla.redhat.com/show_bug.cgi?id=
1333238#c12> for more
details).
10 is not a whole lot, but closer to the architectural limit of 15 than
our current 4, so it can be considered a stop-gap solution until all
guests manage to migrate to virtio-1.0, and no longer need PCI IO BARs
behind PCIe downstream ports.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=
1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Laszlo Ersek [Mon, 9 May 2016 20:39:44 +0000 (22:39 +0200)]
OvmfPkg/PlatformPei: set PCI IO port aperture dynamically
Make PcdPciIoBase and PcdPciIoSize dynamic PCDs, and set them in
MemMapInitialization(), where we produce our EFI_RESOURCE_IO descriptor
HOB. (The PCD is consumed by the core PciHostBridgeDxe driver, through our
PciHostBridgeLib instance.)
Take special care to keep the GCD IO space map unchanged on all platforms
OVMF runs on.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=
1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Laszlo Ersek [Mon, 9 May 2016 19:04:47 +0000 (21:04 +0200)]
OvmfPkg: determine PMBA value dependent on host bridge device ID
In this patch, the AcpiTimerLib instances, ResetSystemLib, and PlatformPei
are modified together in order to keep VMs functional across a bisection:
they all must agree on the PMBA value used.
ResetSystemLib must not use dynamic PCDs. With SOURCE_DEBUG_ENABLE, it
gets linked into the debug agent, therefore the same restrictions apply to
it as to BaseRomAcpiTimerLib. Luckily, AcpiPmControl() is only used for
powering off the virtual machine, thus the extra cost of a PCI config
space read, compared to a PcdGet16(), should be negligible.
This is the patch that moves the PMBA to IO port 0x0600 on Q35 in
practice.
The ResetSystemLib change is easiest to verify with the "reset -s" command
in the UEFI shell (which goes through gRT->ResetSystem() and, in OVMF,
PcAtChipsetPkg/KbcResetDxe).
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=
1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Laszlo Ersek [Mon, 9 May 2016 17:46:00 +0000 (19:46 +0200)]
OvmfPkg: introduce ICH9_PMBASE_VALUE
According to the ICH9 spec, PMBASE "provides 128 bytes of I/O space for
ACPI, GPIO, and TCO logic. This is placed on a 128-byte boundary".
On the Q35 machine type of QEMU, our current PMBASE setting of 0xB000 is
the only thing that prevents us from lowering the base of the PCI IO port
aperture from 0xC000. (The base must be aligned to 0x1000 due to PCI
bridge requirements.)
By moving our PMBASE to 0x0600 (moving the register block to
0x0600..0x067F inclusive), which is also what SeaBIOS uses on Q35, we will
be able to lower the PCI IO port aperture base to 0x6000 (the next IO port
under it being taken by the "vmport" device, at fixed 0x5658), while
steering clear of other QEMU devices.
On PIIX4, freeing up the 0x1000 IO ports at 0xB000 wouldn't help much,
because the 0xA000 block right below it is occupied by unmovable devices
(see <https://bugzilla.redhat.com/show_bug.cgi?id=
1333238#c19> for
details).
Doing this for Q35 only has two more benefits:
- It won't interfere with Xen guests,
- The Q35 machine type with the smallest version number is "pc-q35-2.4",
which is guaranteed to have an ACPI generator. This matters because the
ACPI tables (FACP, DSDT) have to reflect the PM base address that we
program.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=
1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Laszlo Ersek [Mon, 9 May 2016 18:05:18 +0000 (20:05 +0200)]
OvmfPkg: add and use industry standard macro PIIX4_PMBA_MASK
We already have the identical purpose (but different value) macro for
ICH9, namely ICH9_PMBASE_MASK in
"OvmfPkg/Include/IndustryStandard/Q35MchIch9.h".
Also, stop bit-negating signed integer constants.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=
1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Laszlo Ersek [Mon, 9 May 2016 17:26:37 +0000 (19:26 +0200)]
OvmfPkg: replace PcdAcpiPmBaseAddress with PIIX4_PMBA_VALUE
In the next patches, we'll differentiate the PMBA IO port address that we
program on PIIX4 vs. Q35.
Normally we'd just turn PcdAcpiPmBaseAddress into a dynamic PCD. However,
because we need this value in BaseRomAcpiTimerLib too (which cannot access
RAM and dynamic PCDs), it must remain a build time constant. We will
introduce its Q35 counterpart later.
As first step, replace the PCD with a new macro in "OvmfPlatforms.h";
Jordan prefers the latter to fixed PCDs in this instance.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=
1333238
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Laszlo Ersek [Tue, 17 May 2016 14:08:23 +0000 (16:08 +0200)]
OvmfPkg/AcpiTimerLib: don't use possibly unset PMBA register (PEI phase)
We should store the right value to the PMBA (if the PMBA needs
initialization) before setting mAcpiTimerIoAddr from the PMBA.
Cc: Gabriel Somlo <somlo@cmu.edu>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Fixes: f122712b42af3d63902c2c141e90d2c200df6790
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Maurice Ma [Mon, 16 May 2016 15:29:40 +0000 (08:29 -0700)]
CorebootModulePkg: Remove PciSioSerialDxe and SerialDxe driver
CorebootPayloadPkg has been changed to use generic SerialDxe driver
from MdeModulePkg. As part of the clean-up, the overridden SerialDxe
and PciSioSerialDxe drivers in CorebootModulePkg need to be removed.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Jiaxin Wu [Mon, 16 May 2016 03:44:45 +0000 (11:44 +0800)]
MdeModulePkg: Refine the code for DxeHttpLib
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Zenith432 [Mon, 16 May 2016 15:51:25 +0000 (15:51 +0000)]
OvmfPkg/XenBusDxe: duplicate twice-iterated VA_LIST in XenStoreVSPrint()
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zenith432 <zenith432@users.sourceforge.net>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: add spaces before macro invocation parentheses; clean
up subject line]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Dandan Bi [Tue, 10 May 2016 10:51:44 +0000 (18:51 +0800)]
MdeModulePkg/SetupBrowser: Clean the BufferValue for string before use
When copy new string content to BufferValue, need to clean the
BufferValue firstly, or the BufferValue may contain some
content that doesn't belong to the new string.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dandan Bi [Wed, 11 May 2016 02:04:19 +0000 (10:04 +0800)]
MdeModulePkg/SetupBrowser: Should free ConfigResp when it no longer be used
When submit form fail, the progress point to the first fail part
in ConfigResp, so should free the ConfigResp after Progrss has
been processed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Laszlo Ersek [Fri, 13 May 2016 09:50:42 +0000 (17:50 +0800)]
MdeModulePkg/BootMaintenanceManagerUiLib: hide library-internal symbol
Static storage duration objects that are internal to a library instance
should:
- either have internal linkage (i.e., be declared STATIC),
- or, if they are referenced in multiple files of the library instance,
prefixed with a word that is specific to the library instance, and
minimizes namespace collisions.
In this case, the "gHiiDriverList" variable (with static storage duration
and external linkage) is defined in both BootMaintenanceManagerUiLib and
UiApp. When these are linked together, GCC catches the multiple external
definitions and aborts the build. (GCC notices this due to commit
214a3b79417f.) Fix the error by applying the first rule above.
Fixes: a85be3ae48a8aaa40b755cd0ff7270c67cfed585
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Laszlo Ersek [Fri, 13 May 2016 09:50:41 +0000 (17:50 +0800)]
MdeModulePkg/BootMaintenanceManagerUiLib: remove unused but set variable
As-is, the code triggers [-Werror=unused-but-set-variable] with GCC.
Fixes: a85be3ae48a8aaa40b755cd0ff7270c67cfed585
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Liming Gao [Mon, 16 May 2016 07:33:41 +0000 (15:33 +0800)]
SecurityPkg: Use PcdGet32() to access PcdPeiCoreMaxFvSupported
FixedPcdGet32() limits PcdPeiCoreMaxFvSupported type as FixedAtBuild.
PcdGet32() allows PCD be configured as FixedAtBuild or PatchableInModule.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Pedroa Liu [Tue, 17 May 2016 00:51:33 +0000 (08:51 +0800)]
EmulatorPkg/EmuGopDxe: Use correct FROM_THIS macro for TextInEx
Fixes assert of "Bad signature"
Pedroa fixed EmuGopSimpleTextInExReadKeyStrokeEx.
Jordan fixed EmuGopSimpleTextInExSetState.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Pedroa Liu <pedroa.liu@insyde.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
[jordan.l.justen@intel.com: Also update EmuGopSimpleTextInExSetState]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Jeff Fan [Fri, 8 Apr 2016 05:55:14 +0000 (13:55 +0800)]
UefiCpuPkg/PiSmmCpuDxeSmm: Use public MSR_IA32_MISC_ENABLE definition
Use the MSR MSR_IA32_MISC_ENABLE definition defined in UefiCpuPkg/Include and
remove the local definition.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Jeff Fan [Tue, 5 Apr 2016 06:33:45 +0000 (14:33 +0800)]
UefiCpuPkg/PiSmmCpuDxeSmm/SmmProfile: Remove unnecessary BTS MSRs
BTS used DS save area by IA32_DS_AREA MSR to get invoker IP instead of the
Last Branch Record Stack. So, removed the unnecessary BTS MSRs.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Jeff Fan [Tue, 5 Apr 2016 06:28:49 +0000 (14:28 +0800)]
UefiCpuPkg/PiSmmCpuDxeSmm/SmmProfile: Fix BTS support check bug
SmmProfile feature depends on BTS feature to get the invoker IP (in SMM) from
last branch record. If this feature is not supported, SmmProfile cannot get the
invoker IP (in SMM). Per IA-32 Architectures Software Developer's Manual, BTS
feature is detected by IA32_MISC_ENABLE. If BIT11 of IA32_MISC_ENABLE is set,
BTS is not supported. But current implementation check BIT11 opposite. Also, BTS
feature does not depends on PEBS feature if supported or not.
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Shifflett, Joseph <joseph.shifflett@hpe.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Reported-by: Shifflett, Joseph <joseph.shifflett@hpe.com>
Signed-off-by: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Shifflett, Joseph <joseph.shifflett@hpe.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Samer El-Haj-Mahmoud [Wed, 11 May 2016 20:28:53 +0000 (04:28 +0800)]
BaseTools: Add HII definitions from UEFI 2.6
Add HII definitions from UEFI 2.6 for HII Image Variability and PNG
Blocks
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Nagaraj Hegde [Fri, 6 May 2016 10:20:00 +0000 (18:20 +0800)]
NetworkPkg:HttpDxe: Code changes to support HTTP PUT/POST operations
Code changes enables HttpDxe to handle PUT/POST operations.
EfiHttpRequest assumes "Request" and "HttpMsg->Headers" can
never be NULL. Also, HttpResponseWorker assumes HTTP Reponse
will contain headers. We could have response which could contain
only a string (HTTP 100 Continue) and no headers. Code changes
tries to do-away from these assumptions, which would enable
HttpDxe to support PUT/POST operations.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P nagaraj-p.hegde@hpe.com
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Qin Long [Mon, 16 May 2016 02:49:21 +0000 (10:49 +0800)]
CryptoPkg/SmmCryptLib: Enable AES support for SMM.
Enable AES cipher support for SmmCryptLib instance.
Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Zhang, Chao B [Mon, 16 May 2016 01:47:15 +0000 (09:47 +0800)]
SecurityPkg: Remove non-ASCII character from TPM warning strings
Remove a non-ASCII apostrophe character from TPM_WARNING_MAINTAIN
message
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Michael Zimmermann [Mon, 16 May 2016 01:31:58 +0000 (09:31 +0800)]
MdePkg: remove Libray references from code base
as reported on github:
https://github.com/tianocore/edk2/issues/79
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Samer El-Haj-Mahmoud [Wed, 11 May 2016 20:53:46 +0000 (04:53 +0800)]
MdePkg: Add NFIT definition from ACPI 6.1
Add NFIT definition from ACPI 6.1 for the NVDIMM Control Region
Structure Valid Fields for Manufacturing Location and Manufacturing Date
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Thu, 12 May 2016 06:22:56 +0000 (14:22 +0800)]
BaseTools/GenFw: enhance to use Magic Field to identify the image
Original use the File Header Machine Field to identify
EFI_IMAGE_OPTIONAL_HEADER32 or EFI_IMAGE_OPTIONAL_HEADER64, it cannot
correctly handle EBC arch PE32 image.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Wed, 11 May 2016 08:09:26 +0000 (16:09 +0800)]
BaseTools/GenFds: enhance INF built arch filter
The bug is use FILE_GUID override to build the same module more than
once, GenFds report warning "xxx NOT found in DSC file; Is it really
a binary module?". The root cause is the module path with FILE_GUID
overridden has the file name FILE_GUIDmodule.inf, then
PlatformDataBase.Modules use FILE_GUIDmodule.inf as key which cause
__GetPlatformArchList__ return empty.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Yonghong Zhu [Wed, 11 May 2016 05:46:44 +0000 (13:46 +0800)]
BaseTools: Fix bug to not mix comment into Asbuilt inf Depex section
in the generated Asbuilt inf would include the driver's complete
dependency expression, and it would be wrote as comment format. Original
bug is mix the depex expression with real comment in the depex section.
this patch is ignore the real comment, and list the depex expression.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Jiewen Yao [Mon, 16 May 2016 00:53:37 +0000 (08:53 +0800)]
MdeModulePkg-DxeCore: rename CoreGetMemoryMapPropertiesTable
This patches rename CoreGetMemoryMapPropertiesTable to
CoreGetMemoryMapWithSeparatedImageSection.
The reason is that CoreGetMemoryMapPropertiesTable is called
by MemoryAttributesTable.c to get separated PE image section
information.
It is confusing to use *PropertiesTable, because it is NOT
related to PropertiesTable.c
We rename it to avoid confusing.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Star Zeng [Fri, 13 May 2016 05:01:28 +0000 (13:01 +0800)]
DuetPkg FSVariable: return error for empty str VariableName to GetVariable
Current GetVariable implementation will return the first variable for
empty str VariableName, it is because GetVariable and GetNextVariablename
are sharing same function FindVariable.
But UEFI sepc defines SetVariable that If VariableName is an empty string,
then EFI_INVALID_PARAMETER is returned, that means an empty string variable
could never be set successfully, so GetVariable should return error for
empty string VariableName.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Star Zeng [Fri, 13 May 2016 05:00:01 +0000 (13:00 +0800)]
MdeModulePkg Variable: return error for empty str VariableName to GetVariable
Current GetVariable implementation will return the first variable for
empty str VariableName, it is because GetVariable and GetNextVariablename
are sharing same function FindVariable.
But UEFI sepc defines SetVariable that If VariableName is an empty string,
then EFI_INVALID_PARAMETER is returned, that means an empty string variable
could never be set successfully, so GetVariable should return error for
empty string VariableName.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
wang xiaofeng [Fri, 13 May 2016 03:20:28 +0000 (11:20 +0800)]
PcAtChipsetPkg AcpiTimerLib: Fix a logic error
if ((PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, EnableRegister) &
EnableMask) != EnableMask)) {
The bracket place is not right, I think it should be
if ((PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, EnableRegister)) &
EnableMask) != EnableMask)
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: wang xiaofeng <winggundum82@163.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Maurice Ma [Fri, 13 May 2016 18:43:23 +0000 (11:43 -0700)]
CorebootPayloadPkg: Use generic SerialDxe driver
Use generic SerialDxe driver in MdeModulePkg instead of the one
in CorebootModulePkg. By doing this the reference for
PciSioSerialDxe driver will also be removed from DSC and FDF file.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Lee Leahy <leroy.p.leahy@intel.com>
Lee Leahy [Thu, 12 May 2016 21:27:04 +0000 (14:27 -0700)]
QuarkSocPkg/SDControllerDxe: Add EFIAPI to SetHighSpeedMode
Add the missing EFIAPI to fix the inconsistent routine declaration and
implementation of a protocol service.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Lee Leahy [Wed, 11 May 2016 23:08:27 +0000 (16:08 -0700)]
QuarkPlatformPkg: Fix variable set but not used build errors
Fix variable set but not used errors detected by GCC 4.8.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Lee Leahy [Wed, 11 May 2016 23:07:55 +0000 (16:07 -0700)]
QuarkPlatformPkg: Fix build errors
Fix build errors detected with GCC 4.8.4: local variable set but not
used!
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Jaben Carsey [Wed, 11 May 2016 15:09:34 +0000 (08:09 -0700)]
ShellPkg: Use a local variable to cache the pointer.
CC: Qiu Shumin <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Jiewen Yao [Fri, 13 May 2016 05:00:53 +0000 (13:00 +0800)]
Add IntelFsp2Pkg and IntelFsp2WrapperPkg.
Add FSP2.0 support.
This series of patch is to support FSP2.0 specification at
https://firmware.intel.com/sites/default/files/FSP_EAS_v2.0_Draft%20External.pdf
Some major updates include:
1) One FSP binary is separated to multiple components:
FSP-T, FSP-M, FSP-S, and optional FSP-O.
Each component has its own configuration data region.
2) All FSP-APIs use same UPD format - FSP_UPD_HEADER.
3) Add EnumInitPhaseEndOfFirmware notifyphase.
4) FSP1.1/FSP1.0 compatibility is NOT maintained.
5) We also add rename Fsp* to FspWrapper* in IntelFsp2WrapperPkg,
to indicate that it is for FspWrapper only.
IntelFspPkg and IntelFspWrapperPkg will be deprecated.
The new Intel platform will follow FSP2.0 and use IntelFsp2Pkg
and IntelFsp2WrapperPkg.
The old platform can still use IntelFspPkg and IntelFspWrapperPkg
for compatibility consideration.
Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Ravi P Rangarajan <ravi.p.rangarajan@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Ravi P Rangarajan <ravi.p.rangarajan@intel.com>
Eric Dong [Thu, 12 May 2016 05:25:26 +0000 (13:25 +0800)]
MdeModulePkg UiApp: change code for easy customization.
Change file arrangement to let user easy customize the front page UI.
After this change:
1. UiCustomizeFrontPage function in FrontPageCustomizedUi.c use to
let user customize front page menus. UiFrontPageCallbackHandler
function use to handle the callback for the added menus.
2. FrontPageCustomizedUiSupport.c file used to add support functions
used by FrontPageCustomizedUi.c file.
3. After this change, only above two files need to be updated if front page
menus needed to be changed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dong, Eric [Thu, 12 May 2016 08:32:17 +0000 (16:32 +0800)]
BootMaintenanceManagerUiLib: change code for customization.
Change file arrangement to let user easy customize the BMM UI.
After this change:
1. UiCustomizeBMMPage function in BootMaintenanceManagerCustomizedUi.c
use to let user customize BMM first page menus. UiBMMCallbackHandler
function use to handle the callback for the added menus.
2. BootMaintenanceManagerCustomizedUiSupport.c file used to add support
functions used by BootMaintenanceManagerCustomizedUi.c file.
3. After this change, only above two files need to be updated if BMM
first page menus needed to be changed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Samer El-Haj-Mahmoud [Wed, 11 May 2016 20:30:55 +0000 (04:30 +0800)]
MdePkg: Add HII definitions from UEFI 2.6
Add HII definitions from UEFI 2.6 for HII Image Variability and PNG
Blocks
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Gary Lin [Mon, 9 May 2016 04:32:55 +0000 (12:32 +0800)]
NetworkPkg: Make HttpBootGetBootFile return EFI_BUFFER_TOO_SMALL
Per the description of HttpBootGetBootFile, the function should return
EFI_BUFFER_TOO_SMALL if the given buffer is smaller than the remote image.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Nagaraj Hegde [Thu, 5 May 2016 06:59:03 +0000 (14:59 +0800)]
MdeModulePkg:DxeHttpLib: Add checks in HttpGenRequestMessage API
HttpGenRequestMessage assumes that HTTP message would always
contain a request-line, headers and an optional message body.
However, subsequent to a HTTP PUT/POST request, HTTP requests
would contain just the message body. This patch supports
creation of such request messages with additional checks.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hegde, Nagaraj P <nagaraj-p.hegde@hpe.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Leahy, Leroy P [Thu, 12 May 2016 23:05:15 +0000 (16:05 -0700)]
CorebootPayloadPkg: Add OHCI driver
Add the USB OHCI driver from revision
24ca2f35 of QuarkSocPkg.
Change-Id: Ie7aa0bc47d4ff06adc57976a5efb0e40ce4e1673
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Leahy, Leroy P [Tue, 10 May 2016 22:34:48 +0000 (15:34 -0700)]
CorebootPayloadPkg: Add SD/eMMC support
Add SD and eMMC DXE driver support to CorebootPayloadPkg.
Change-Id: Ibfd3a2cc32a653ce51e38d9157ea3c6da25a5474
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Leahy, Leroy P [Tue, 10 May 2016 22:34:36 +0000 (15:34 -0700)]
CorebootPayloadPkg: Set the proper Shell file GUID
Set the proper Shell file GUID so that the BDS transfers control to the
Shell.
Change-Id: I816636a340bbe2f76ac1973b9cb685084c4f88a0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Leahy, Leroy P [Tue, 10 May 2016 22:34:22 +0000 (15:34 -0700)]
CorebootPayloadPkg: Use correct BaseSerialPortLib16550
Use the BaseSerialPortLib16550 which sets RTS and DTR during
initialization. This fixes the mis-matched flow control issue when
the flow control signals are connected between the host and target
and the host has flow control enabled.
Change-Id: I3505e129b2de3c5c17fff23c62553f15cd892dca
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Leahy, Leroy P [Tue, 10 May 2016 22:34:11 +0000 (15:34 -0700)]
CorebootPayloadPkg: Assume no PCI serial devices
Set the vendor to 0xffff which indicates the end of the list.
Change-Id: If6475e04d3675f0a932571a85d1dd3f301416b6a
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
eviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Leahy, Leroy P [Tue, 10 May 2016 22:33:57 +0000 (15:33 -0700)]
CorebootPayloadPkg: Use DOS line endings
Convert to using DOS line endings.
Change-Id: Ie2f148867d9b2b386d556583afb6716ec21399e9
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Jaben Carsey [Tue, 10 May 2016 20:35:14 +0000 (13:35 -0700)]
report line number for command errors in a script.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Ard Biesheuvel [Wed, 11 May 2016 12:46:05 +0000 (14:46 +0200)]
ArmPkg/PlatformBootManagerLib: implement new generic version
This implements the platform glue for the new generic BDS implementation.
It is based on the ArmVirtQemu version, with the QEMU references removed.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ard Biesheuvel [Wed, 11 May 2016 08:38:47 +0000 (10:38 +0200)]
ArmPkg/ArmLib: don't invalidate entire I-cache on range operation
Instead of cleaning the data cache to the PoU by virtual address and
subsequently invalidating the entire I-cache, invalidate only the
range that we just cleaned. This way, we don't invalidate other
cachelines unnecessarily.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Gary Lin [Wed, 11 May 2016 08:40:49 +0000 (16:40 +0800)]
OvmfPkg/PlatformBootManagerLib: Postpone the shell registration
We currently register the shell before creating the boot options for
the block devices and the network devices, so the boot manager boots
into the internal shell if the user doesn't specify the boot order.
However, Xen doesn't support fw_cfg, so there is no way to change the
boot order with the external command, and the firmware will always
boot into the internal shell if the user doesn't interfere the boot
process.
This patch postpones the shell registration after MdeModulePkg/BDS
creates all the boot options for the block and network devices, so
that firmware will try to boot the block/network devices first.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Michael Brown [Wed, 11 May 2016 21:50:09 +0000 (22:50 +0100)]
EmbeddedPkg/Lan9118Dxe: Do not return uninitialised TxBuff
Conform to the specification for GetStatus(), which states that "if
there are no transmit buffers to recycle and TxBuf is not NULL, *TxBuf
will be set to NULL".
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Laszlo Ersek [Mon, 9 May 2016 11:32:27 +0000 (19:32 +0800)]
OvmfPkg/QemuBootOrderLib: adapt Q35 SATA PMPN to UEFI spec Mantis 1353
On the Q35 machine type of QEMU, there is no port multiplier connected to
the on-board SATA controller. Therefore the AtaAtapiPassThru driver update
for Mantis ticket 1353 <https://mantis.uefi.org/mantis/view.php?id=1353>
changes the middle number (the Port Multiplier Port Number) in the Sata()
device path nodes from 0x0 to 0xFFFF.
Adapt the translation from OpenFirmware in QemuBootOrderLib.
(Note: QemuBootOrderLib is deprecated at this point (see USE_OLD_BDS in
the DSC files), but until we remove it, it should be kept in sync with
QemuNewBootOrderLib.)
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Laszlo Ersek [Mon, 9 May 2016 11:32:26 +0000 (19:32 +0800)]
OvmfPkg/QemuNewBootOrderLib: adapt Q35 SATA PMPN to UEFI spec Mantis 1353
On the Q35 machine type of QEMU, there is no port multiplier connected to
the on-board SATA controller. Therefore the AtaAtapiPassThru driver update
for Mantis ticket 1353 <https://mantis.uefi.org/mantis/view.php?id=1353>
changes the middle number (the Port Multiplier Port Number) in the Sata()
device path nodes from 0x0 to 0xFFFF.
Adapt the translation from OpenFirmware in QemuNewBootOrderLib.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Feng Tian <feng.tian@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Hao Wu [Fri, 8 Apr 2016 08:31:32 +0000 (16:31 +0800)]
MdeModulePkg AtaAtapiPassThru: Fix incorrect parameter description comment
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Hao Wu [Fri, 8 Apr 2016 08:23:57 +0000 (16:23 +0800)]
MdeModulePkg Ata: Use the new (incompatible) PortMultiplierPort semantics
The Mantis ticket 1353 <https://mantis.uefi.org/mantis/view.php?id=1353>
and Mantis ticket 1472 <https://mantis.uefi.org/mantis/view.php?id=1472>
updated the description of the port multiplier port number parameter in
SATA Device Path Node and ATA Pass-Through Protocol.
Now, this parameter should be set to 0xFFFF instead of 0 to indicate that
an ATA device is directly attached on the controller port.
Please note that this is an incompatible change. The consumer of SATA
device path or ATA_PASS_THRU needs to re-examine its usage to follow UEFI
2.5 mantis 1353 and 1472.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Hao Wu [Fri, 8 Apr 2016 08:17:37 +0000 (16:17 +0800)]
MdePkg Protocol/AtaPassThru.h: Update PortMultiplierPort related comments
The UEFI2.5 Errata (Mantis ticket 1472 -
https://mantis.uefi.org/mantis/view.php?id=1472) updated
'PortMultiplierPort' parameter description for the following services in
EFI_ATA_PASS_THRU_PROTOCOL:
1. PassThru
2. BuildDevicePath
3. ResetDevice
Now, if there is no port multiplier on a ATA controller port, the
PortMultiplierPort parameter should be set to 0xFFFF instead of 0.
Please note that this is an incompatible semantic change. The consumer of
EFI_ATA_PASS_THRU_PROTOCOL needs to re-examine its usage to follow UEFI
2.5 Errata mantis 1472.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Hao Wu [Fri, 8 Apr 2016 08:14:16 +0000 (16:14 +0800)]
MdePkg Protocol/DevicePath.h: Update SATA Device Path comments
The UEFI2.5 spec (Mantis ticket 1353 -
https://mantis.uefi.org/mantis/view.php?id=1353) updated the Port
Multiplier Port Number description of SATA device path to use 0xFFFF when
the device is directly connected to the HBA.
Please note that this is an incompatible semantic change. The consumer of
SATA device path needs to re-examine its usage to follow UEFI 2.5 mantis
1353.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Eric Dong [Wed, 11 May 2016 02:36:05 +0000 (10:36 +0800)]
SecurityPkg OpalPasswordDxe: Error handling enhance when input password.
Enhance the error handling:
1. When the device is unlocked at BIOS phase and system does a warm reboot,
the device may be still in unlock status if it uses external power. For
such case, we would still popup password window to ask user input. If
user presses ESC key here, we would force the system shut down or ask
user input again to avoid security hole.
2. When user reach max retry count, force shutdown.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Feng Tian <feng.tian@intel.com>
Feng Tian [Wed, 11 May 2016 02:44:42 +0000 (10:44 +0800)]
MdeModulePkg/UsbMouseAbsolutePointerDxe: fix VS2015 NOOPT build error
Cc: Shumin Qiu <shumin.qiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Feng Tian <feng.tian@intel.com>
Reviewed-by: Shumin Qiu <shumin.qiu@intel.com>
Zhang, Lubo [Wed, 11 May 2016 01:37:39 +0000 (09:37 +0800)]
NetworkPkg: Bug fix of iSCSI to support MPIO
If two attempts added on different NIC and enable
MPIO attribute, then change the attempts order. If
both two attempts succeed to connect the target,it
should abort the later one in the order and uninstall
ExtScsiPassThruProtocol Interface, But now it
unistall it twice.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Zhang Lubo <lubo.zhang@intel.com>
Reviewed-By: Ye Ting <ting.ye@intel.com>
Reviewed-By: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-By: Wu Jiaxin <jiaxin.wu@intel.com>
Ard Biesheuvel [Wed, 13 Apr 2016 08:07:55 +0000 (10:07 +0200)]
ArmPlatformPkg/PL031RealTimeClockLib: remove local copy of gRT pointer
Since the only reason for keeping a local copy mRT of the gRT pointer
is to be able to call GetVariable/SetVariable at runtime, use the
UefiRuntimeLib helpers instead, so that we can drop mRT altogether.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ard Biesheuvel [Wed, 13 Apr 2016 08:04:24 +0000 (10:04 +0200)]
ArmPlatformPkg/PL031RealTimeClockLib: don't clobber gRT table
PL031RealTimeClockLib is a base library that could potentially (although
unlikely) be incorporated into other modules than the DXE_RUNTIME_DRIVER
module that it was intended to complement.
This means the library has no business whatsoever setting the Runtime
Service table pointers directly (since we have no way of knowing which
instance will 'win', and the pointers may end up referring to a module
that is not a DXE_RUNTIME_DRIVER). So remove the assignment altogether.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ryan Harkin [Wed, 11 May 2016 08:23:59 +0000 (09:23 +0100)]
EmbeddedPkg/Lan9118Dxe: add mask PCD to disable auto-negotiation features
Add a PCD to allow the platform to mask in/out specific features of
the LAN9118 device advertised during auto-negotiation.
For example, the Juno ARM Development Platform doesn't support full
duplex mode. This PCD will allow the platform developer to prevent the
full duplex modes from being advertised.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
[ardb: change default feature mask so that full duplex is disabled]
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Yonghong Zhu [Fri, 6 May 2016 09:14:26 +0000 (17:14 +0800)]
BaseTools: Fix bug in GenFds to handle FV image alignment
Cover the case that .fv file in the [Binaries] section.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Dandan Bi [Mon, 9 May 2016 11:53:00 +0000 (19:53 +0800)]
Security/OpalPasswordDxe: Enhance the logic in RouteConfig/ExtractConfig
Make the implementation of RouteConfig/ExtractConfig function
follow the UEFI spec.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Yonghong Zhu [Tue, 10 May 2016 09:46:23 +0000 (17:46 +0800)]
BaseTools: fix a bug for uni file \x####\ format handling
It should start from the last '\x' position + 1 to find next '\x'
character.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Zhang, Chao B [Wed, 11 May 2016 00:59:40 +0000 (08:59 +0800)]
Merge branch 'master' of github.com:tianocore/edk2
Zhang, Chao B [Tue, 10 May 2016 07:50:02 +0000 (15:50 +0800)]
SecurityPkg: SecureBootConfigDxe: Add NULL pointer check
Add SecureBoot NULL pointer check before reference it.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Samer El-Haj-Mahmoud <elhaj@hpe.com>
Reviewed-by: Qiu Shumin <shumin.qiu@intel.com>
Ruiyu Ni [Tue, 10 May 2016 03:14:45 +0000 (11:14 +0800)]
OvmfPkg/PciHostBridgeLib: Scan for root bridges when running over Xen
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Ruiyu Ni [Mon, 9 May 2016 06:03:57 +0000 (14:03 +0800)]
OvmfPkg/PciHostBridgeLib: Change InitRootBridge prototype
The patch re-factors the code without functionality impact.
Next patch will add code to support OVMF above Xen.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ruiyu Ni [Mon, 9 May 2016 05:49:27 +0000 (13:49 +0800)]
MdeModulePkg/PciHostBridgeDxe: Honor ResourceAssigned
Change PciHostBridgeDxe driver to not install the
PciHostBridgeResourceAllocation protocol and let
PciRootBridgeIo.Configuration() return the correct PCI resource
assignment information when the ResourceAssigned is TRUE.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ruiyu Ni [Fri, 29 Apr 2016 08:43:56 +0000 (16:43 +0800)]
MdeModulePkg/PciHostBridgeLib: Add ResourceAssigned field
Some platform doesn't require PciBus driver to assign resource
to PCI devices which causes PciRootBridgeIo.Configuration() cannot
return correct resource information to caller.
When resource assignment by PciBus is not mandatory, only light
version of PCI bus enumeration is performed, which only collects
the device resource consumption and publishes the PciIo instance.
The corresponding logic is in PciEnumeratorLight() in PciBus driver.
But PciEnumeratorLight() still depends on
PciRootBridgeIo.Configuration() returns the starting bus number in
order to search down to find all PCI devices under the root bridge.
When ResourceAssigned in PCI_ROOT_BRIDGE returned by
PciHostBridgeGetRootBridges() is TRUE, PciHostBridge driver treats
the Bus/Io/Mem/MemAbove4G/PMem/PMemAbove4G as the resource that are
*actually assigned* to the root bridge, instead of the resource that
*can be assigned* to the root bridge.
So that PciRootBridgeIo.Configuration() can return the correct
information.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ruiyu Ni [Sat, 30 Apr 2016 01:34:54 +0000 (09:34 +0800)]
OvmfPkg/PciHostBridgeLib: Set correct Base/Limit for absent resource
In order to match the previous commit, Base must be strictly larger than
Limit if some type of aperture is not available on a PCI root bridge.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ruiyu Ni [Fri, 29 Apr 2016 09:38:51 +0000 (17:38 +0800)]
MdeModulePkg/PciHostBridgeDxe: Fix a Base/Limit comparing bug
When the aperture base equals to aperture limit, the old code treats
the aperture as non-existent. It's not correct because it indicates
a range starting with base and the length is 1.
The new code corrects the comparing bug.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ruiyu Ni [Fri, 29 Apr 2016 09:41:11 +0000 (17:41 +0800)]
MdeModulePkg/PciHostBridgeDxe: Don't miss prefetchable MMIO aperture
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Linn Crosetto [Tue, 10 May 2016 18:16:12 +0000 (12:16 -0600)]
ArmVirtPkg: set PcdMaxVariableSize and PcdMaxAuthVariableSize
To support UEFI Secure Boot and the Linux persistent store with UEFI
variables, set PcdMaxVariableSize to 0x2000 bytes as is done in OvmfPkg.
For reference, the related Ovmf commits:
8cee3de7 2d441ca9
Also increase the maximum size for Authenticated variables in order to
handle a larger Signature List size as is done in OvmfPkg. Related Ovmf
commit:
f5404a3e
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Linn Crosetto <linn@hpe.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Leahy, Leroy P [Mon, 9 May 2016 17:57:55 +0000 (10:57 -0700)]
CorebootPayloadPkg/PlatformBdsLib: Pass more serial parameters
Pass the serial port baudrate, register stride, input clock rate and
ID from coreboot to CorebootPayloadPkg.
Change-Id: I37111d23216e4effa2909337af7e8a6de36b61f7
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Leahy, Leroy P [Mon, 9 May 2016 17:57:35 +0000 (10:57 -0700)]
CorebootPayloadPkg/PciBusNoEnumerationDxe: Skip disabled devices
Skip non-bridge devices which are not enabled either for memory or I/O
access.
Change-Id: I1a39c69a8556b6b9cefd1a2bb191f7e0744ddfb0
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Leahy, Leroy P [Mon, 9 May 2016 17:57:21 +0000 (10:57 -0700)]
CorebootModulePkg/PciBusNoEnumerationDxe: Remove white space
Remove trailing white space from PciEnumeratorSupport.c.
Change-Id: Ia2f354151d46c09b140e2b42609d76fbbf8333f9
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>