Dandan Bi [Wed, 8 Jun 2016 08:46:55 +0000 (16:46 +0800)]
MdeModulePkg/UiApp: Fix the incorrect use of the HiiHandle
In current code, when adding string package, it will return
'gStringPackHandle'. But the code use the 'gHiiHandle' to get
string. It is incorrect. This patch is to fix this issue.
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Jiaxin Wu [Mon, 6 Jun 2016 05:30:22 +0000 (13:30 +0800)]
NetworkPkg: Fix DNS GeneralLookUp failure in some case
QClass value may be not equal to 1(DNS_CLASS_INET) when
GeneralLookUp query is called. So, remove QClass value check.
Moreover, the 'Identification' and 'Type' filed in Query packet
should not be changed to little endian since the packet maybe
retransmitted while there is any error happened.
Jiaxin Wu [Thu, 2 Jun 2016 06:50:07 +0000 (14:50 +0800)]
NetworkPkg: Fix IPv6 boot failure in diff net segment issue
This patch is used to fix HTTP IPv6 boot failure in diff net segment
issue. IPv6 gateway address should be registered before DNS query,
otherwise, DNS query will fail.
Jiaxin Wu [Tue, 31 May 2016 14:17:28 +0000 (22:17 +0800)]
NetworkPkg: Handling timeout case in httpboot driver
This patch is used to handle timeout case when downloading
the message. The Status in the token should also be checked
to handle any response error case including timeout case.
Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Zhang Lubo <lubo.zhang@intel.com> Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Gary Lin <glin@suse.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Tested-by: Gary Lin <glin@suse.com> Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Jiaxin Wu [Tue, 31 May 2016 14:17:27 +0000 (22:17 +0800)]
NetworkPkg: HttpDxe response/cancel issue fix
Remove timeout check for http body message receive. It should be handled
in HttpBootDxe driver for http response unblocking implementation. After
timeout removed, the Wrap date should not be freed immediately. Only the
TCP CompletionToken in Wrap date is canceled or signaled, the Wrap date
could be freed.
In addition, Http cancel token is also incorrect. Tcp Cancel should be called
to cancel TCP CompletionToken in Wrap date before close it directly. Otherwise,
some exception behavior may happened.
This patch also refine the coding style for HttpDxe driver.
Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Zhang Lubo <lubo.zhang@intel.com> Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Gary Lin <glin@suse.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Tested-by: Gary Lin <glin@suse.com> Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
Jiaxin Wu [Tue, 31 May 2016 14:17:26 +0000 (22:17 +0800)]
NetworkPkg: Support TCP Cancel function
This path is used to support TCP Cancel function to abort an
asynchronous connection, listen, transmission or receive request.
If any TCP CompletionToken is not signaled, it should not be closed
directly by calling CloseEvent (Still in the TCP TokenList). If not,
any exception behavior may be triggered. We should cancel it by calling
Tcp->Cancel() first. In such a case, TCP Cancel function is
necessary.
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Zhang Lubo <lubo.zhang@intel.com> Cc: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Cc: Gary Lin <glin@suse.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Gary Lin <glin@suse.com> Reviewed-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Tested-by: Gary Lin <glin@suse.com> Tested-by: Hegde Nagaraj P <nagaraj-p.hegde@hpe.com>
TCG PC Client PTP spec defines that if InterfaceType is defined as TIS1.3. All the other fields of the FIFO Interface Identifier Register are skipped.
http://www.trustedcomputinggroup.org/pc-client-specific-platform-tpm-profile-for-tpm-2-0-v43-150126/
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Chao Zhang <chao.b.zhang@intel.com> Reviewed-by: Yao Jiewen <jiewen.yao@intel.com> Reviewed-by: Long Qin <qin.long@intel.com>
Star Zeng [Wed, 8 Jun 2016 07:16:42 +0000 (15:16 +0800)]
IntelFrameworkModulePkg: Correct the usage of gPerformanceProtocolGuid in inf
Add gPerformanceProtocolGuid in BdsDxe.inf explicitly.
Currently, BdsDxe could build pass as it inherits
gPerformanceProtocolGuid from GenericBdsLib.inf.
Also update the usage of gPerformanceProtocolGuid in GenericBdsLib.inf.
Star Zeng [Wed, 8 Jun 2016 07:15:03 +0000 (15:15 +0800)]
MdeModulePkg: Correct the usage of gPerformanceProtocolGuid in inf
Add gPerformanceProtocolGuid in BdsDxe.inf explicitly.
Currently, BdsDxe could build pass as it inherits
gPerformanceProtocolGuid from UefiBootManagerLib.inf.
Also update the usage of gPerformanceProtocolGuid in UefiBootManagerLib.inf.
Hao Wu [Mon, 6 Jun 2016 05:02:52 +0000 (13:02 +0800)]
MdeModulePkg RamDiskDxe: Do not save 'Size' numeric value by varstore
The 'Size' numeric value used when creating a raw RAM disk does not
require a varstore to save its previous value in the create raw RAM disk
HII page.
The expecting behavior is that after a user created a raw RAM disk, the
next time when the create raw RAM disk page is entered, the 'Size' numeric
will be the default value (EFI_PAGE_SIZE).
Zhang, Chao B [Wed, 8 Jun 2016 07:35:16 +0000 (15:35 +0800)]
SecurityPkg: Tcg2Smm: Make TCG2 PP version configurable
Make TCG2 PP version configurable to meet different request. Current default version is 1.3.
http://www.trustedcomputinggroup.org/physical-presence-interface_1-30_0-52/
This patch is used to update IP4->Configure() to allow the upper layer
modules to obtain a default address by setting UseDefaultAddress to TRUE
when default address is not available yet.
Jeff Fan [Mon, 6 Jun 2016 02:04:11 +0000 (10:04 +0800)]
UefiCpuPkg/MtrrLib: Fixed bug if length is less than Fixed-MTRR range
Currently, if the memory length to be programmed is less than the remaining size
of one Fixed-MTRR supported, RETURN_UNSUPPORTED returned. This is not correct.
This is one regression at 07e889209034ba94bfac9e765b8a50ef344daef2 when we
updated ProgramFixedMtrr() to remove the loop of calculating Fixed-MTRR Mask.
This fix will calculate Right offset in Fixed-MTRR beside left offset. It
supports small length (less than remaining size supported by Fixed-MTRR) to be
programmed.
Cc: Eric Dong <eric.dong@intel.com> Cc: Feng Tian <feng.tian@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
PiDxeS3BootScriptLib has a constructor S3BootScriptLibInitialize() that
registers ready-to-lock callback S3BootScriptSmmEventCallBack() and several
more. The library is linked to SMM modules. If the module entry-point
function returns error (because of lack of resources, unsupported,
whatever), the module will be unloaded and the notify callback pointers
will point to undefined memory. On ready-to-lock exception occurs when
calling S3BootScriptSmmEventCallBack(), and probably all the other
callbacks registered by the constructor would also cause exception.
This patch is to implement library Destructor to free the resources
allocated by S3BootScriptLibInitialize() and unregister callbacks.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
SmmLockBoxSmmLib is linked to SMM modules. If the module entry-point
function returns error, the module will be unloaded and the global
variables will point to undefined memory.
This patch is to add DESTRUCTOR SmmLockBoxSmmDestructor to uninstall
SmmLockBoxCommunication configuration table if it has been installed
in Constructor.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
Cinnamon Shia [Mon, 6 Jun 2016 04:07:58 +0000 (12:07 +0800)]
MdeModulePkg/AtaBusDxe: Fix some ATA hard drives cannot be discovered
If there is no multiplier, the DEV bit of the ATA device register would
always be set. It causes that some ATA hard drives don't response the
ATA identity command sent to them.
Below is the description about DEV bit in ATA spec:
A device is selected when the DEV bit of the Device register is equal to
the device number assigned to the device by means of a Device 0/Device 1
jumper or switch, or use of the CSEL signal.
Below is the description about DEV bit in SATA spec:
When the DEV bit in the Device register is set to one, selecting the
non-existent Device 1, the host adapter shall respond to register reads
and writes as specified for a Device 0 with no Device 1 present, as
defined in the ATA/ATAPI-5 standard.
open-coded the EnableQuietBoot() function (and its dependencies / friends)
from IntelFrameworkModulePkg BDS.
This code duplication can be avoided; the functionality is available from
the following three libraries in MdeModulePkg:
- BootLogoLib: provides the BootLogoEnableLogo() function. It does not
provide the internal ConvertBmpToGopBlt() function -- that one is
delegated to ImageDecoderLib (function DecodeImage()).
- ImageDecoderLib: a general library that registers decoder plugins for
specific image formats, and provides the generic DecodeImage() on top.
- BmpImageDecoderLib: one of said decoder plugins, for handling BMP images
(which is the format of our logo).
In this patch, we revert 1f73aef50c5e, and atomically incorporate the
above libraries. This is inspired by Nt32Pkg commit 859e75c4fc42:
Nt32Pkg: Use BootLogoLib for logo and progress bar drawing.
Laszlo Ersek [Wed, 1 Jun 2016 17:59:52 +0000 (19:59 +0200)]
OvmfPkg: set SMM stack size to 16KB
The default stack size (from UefiCpuPkg/UefiCpuPkg.dec) is 8KB, which
proved too small (i.e., led to stack overflow) across commit range 98c2d9610506^..f85d3ce2efc2^, during certificate enrollment into "db".
As the edk2 codebase progresses and OVMF keeps including features, the
stack demand constantly fluctuates; double the SMM stack size for good
measure.
Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/12864
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1341733
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Wed, 1 Jun 2016 17:23:20 +0000 (19:23 +0200)]
UefiCpuPkg: change PcdCpuSmmStackGuard default to TRUE
This Feature PCD causes PiSmmCpuDxe to catch SMM stack overflow at
runtime, logging a clear error message, and entering a CPU dead loop.
Compared to the chaotic and catastrophic consequences of the stack leaking
into, and corrupting, the SMM page table, a stack guard that is enabled by
default is vastly superior.
We should not require sane platforms to explicitly opt in to this
safeguard; instead, we should require platforms that prefer to live
dangerously to opt out of it.
Stack overflow in SMM might even give rise to security vulnerabilities.
Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Ref: http://thread.gmane.org/gmane.comp.bios.edk2.devel/12864
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1341733
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Dandan Bi [Tue, 31 May 2016 09:52:19 +0000 (17:52 +0800)]
MdeModulePkg/HiiDatabase: Remove the incorrect calculation of font baseline
When add Font Package, the cell in EFI_HII_FONT_PACKAGE_HDR
contains the measurement of the widest and tallest characters
in the font. The measurement may be not absolutely correct,
so when use this cell information to calculate the baseline may
cause incorrect result. Besides this calculation is not necessary.
So remove it now.
Cc: Liming Gao <liming.gao@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Dandan Bi [Tue, 31 May 2016 08:44:47 +0000 (16:44 +0800)]
MdeModulePkg/HiiDatabase: Preinit background when render string to screen
When render string to screen, for proportional fonts,
the background color may not set to the whole BltBuffer.
And this will cause incorrect display.
Now initialize the background color to fix this issue.
Cc: Liming Gao <liming.gao@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Jiewen Yao [Thu, 2 Jun 2016 14:38:23 +0000 (22:38 +0800)]
MdePkg/BaseLib: Add 2 more safe string functions.
Add UnicodeStrToAsciiStrS() and AsciiStrToUnicodeStrS() API.
These 2 safe version APIs are used to replace UnicodeStrToAsciiStr() and
AsciiStrToUnicodeStr() API.
The safe version string convert APIs use similar check as StrCpyS().
Cc: Liming Gao <Liming.Gao@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiewen Yao <Jiewen.Yao@intel.com> Reviewed-by: Liming Gao <Liming.Gao@intel.com> Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The patch is to use Global instead of mVariableModuleGlobal in the
ASSERT (XXX) to make code more clear although mVariableModuleGlobal is
equal to Global actually.
Gary Lin [Wed, 1 Jun 2016 10:26:20 +0000 (18:26 +0800)]
OvmfPkg/PlatformBootManagerLib: Connect the Xen drivers before loading NvVars
When OVMF tried to load the file-based NvVars, it checked all the PCI
instances and connected the drivers to the mass storage device. However,
Xen registered its PCI device with a special class id (0xFF80), so
ConnectRecursivelyIfPciMassStorage() couldn't recognize it and skipped the
driver connecting for Xen PCI devices. In the end, the Xen block device
wasn't initialized until EfiBootManagerConnectAll() was called, and it's
already too late to load NvVars.
This commit connects the Xen drivers in ConnectRecursivelyIfPciMassStorage()
so that Xen can use the file-based NvVars.
v3:
* Introduce XenDetected() to cache the result of Xen detection instead
of relying on PcdPciDisableBusEnumeration.
v2:
* Cosmetic changes
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Hao Wu [Wed, 1 Jun 2016 08:32:03 +0000 (16:32 +0800)]
MdeModulePkg NvmExpressDxe: Fix invalid queue size when creating IO queues
The Maximum Queue Entries Supported (MQES) field in the CAP (Controller
Capabilities) register for a NVMe controller restrict the maximum
individual queue size that the controller supports.
The origin code does not check this value and always uses a hardcode value
when creating I/O submission/completion queues for asynchronous
transmission. The hardcode value might be larger than the MQES field, this
will lead to an 'Invalid Queue Size' error when creating I/O
submission/completion queues.
The patch will add checks to make sure proper queue size is passed when
creating I/O submission/completion queues.
v2:
*Refine the coding style according edk2 community's feedback.
Current SNP UNDI Initialize command does not follow the UEFI Spec
to update the SNP MediaPresent field. The result for the Initialize
command execution check should be:
StatFlags: (1) Monitor the upper two bits (14 & 15) in the field to know
whether the command has been executed by the UNDI (Not started, Queued,
Error, Complete). (2) Check the other field to see if there is an active
connection to this network device (used to update MediaPresent).
StatCode: After command execution completes, either successfully or not,
this field contains the result of the command execution (success or failure).
This patch is used to fix it.
NOTE: If any UNDI driver does not follow the UEFI Spec for the media status
update, it may meet failure with this more conditions check (StatFlags).
Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
Maurice Ma [Fri, 27 May 2016 20:26:28 +0000 (13:26 -0700)]
IntelFsp2Pkg/Tools: Add FSP rebasing function into SplitFspBin tool
Enhanced the SplitFspBin tool in IntelFsp2Pkg to support:
- Rebase FSP 2.0 components to a different base address
- Display FSP 2.0 information header
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Maurice Ma <maurice.ma@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Giri P Mudusuru [Tue, 31 May 2016 19:46:37 +0000 (12:46 -0700)]
IntelFsp2Pkg: Add missing OEM status code defines.
Adding defines from FSP EAS v2.0 section 11.2.2 Oem Status code.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Maurice Ma <maurice.ma@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Giri P Mudusuru <giri.p.mudusuru@intel.com> Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com> Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Fu, Siyuan [Thu, 26 May 2016 01:04:07 +0000 (09:04 +0800)]
NetworkPkg: Stop the timer before clean IP service.
In Ip6CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.
Fu, Siyuan [Thu, 26 May 2016 01:04:06 +0000 (09:04 +0800)]
MdeModulePkg: Stop the timer before clean IP service.
In Ip4CleanService()it first cleaned some resources, then stop the timer .
While before the timer stopped it may try to access some already freed
data, which may generate an exception.
This patch updates the driver to stop the timer event before starting to
clean up the service data.
Hao Wu [Fri, 27 May 2016 04:42:36 +0000 (12:42 +0800)]
MdeModulePkg RamDiskDxe: Fix VS2010 build error
Potentially uninitialized local variables 'TableKey' and 'TableHeader'
might be used in functions RamDiskPublishNfit() and RamDiskUnpublishNfit()
in file RamDiskProtocol.c.
Jeff Fan [Mon, 23 May 2016 05:44:13 +0000 (13:44 +0800)]
MdeModulePkg/PiSmmIpl: Check order of EndOfDxe and DxeSmmReadyToLock
According to PI specification, EndOfDxe Event should be signaled before
DxeSmmReadyToLock protocol installation. This update is ASSERT if EndOfDxe
Event is not signaled when DxeSmmReadyToLock protocol installed. And do
REPORT_STATUS_CODE() also.
Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Feng Tian <feng.tian@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Tested-by: Laszlo Ersek <lersek@redhat.com>
Cohen, Eugene [Tue, 8 Dec 2015 14:42:52 +0000 (14:42 +0000)]
MdeModulePkg: Allow DxeIpl to load without permanent memory
PI1.4a spec added "For S3 resume boot modes DXE IPL must be
prepared to execute without permanent memory installed and
invoke the S3 resume modules."
To follow PI1.4a spec, this patch is to update DxeIpl and
PeiCore to enable S3 resume from temporary memory.
The normal boot path still enforces the permanent memory
requirement.
Maurice Ma [Thu, 26 May 2016 22:13:23 +0000 (15:13 -0700)]
CorebootModulePkg/PciHostBridgeLib: Fix PCI 64bit memory BAR size issue
The current PCI 64bit memory BAR size calculation in PciHostBridgeLib
assumes all 32 bits in the upper BAR are fully writable. However,
platform might only support partial address programming, such as 40bit
PCI BAR address. In this case the complement cannot be used for size
calculation. Instead, the lowest non-zero bit should be used for BAR
size calculation.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Maurice Ma <maurice.ma@intel.com> Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
CorebootPayloadPkg has switched to use the generic PciBus and
PciHostBridge driver form MdeModulePkg. As a result, the
non-enumeration drivers including PciBusNoEnumerationDxe and
PciRootBridgenoEnumerationDxe need to be removed.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Maurice Ma <maurice.ma@intel.com> Reviewed-by: Prince Agyeman <prince.agyeman@intel.com>
Maurice Ma [Wed, 25 May 2016 18:21:18 +0000 (11:21 -0700)]
IntelFsp2Pkg/Tools: Add BSF bit field support in GenCfgOpt tool
The current GenCfgOpt tool does not generate bit fields in BSF.
This change will allow bit fields to be created in BSF for a specific
FSP UPD item. The argument for the tool is also updated to be in sync
with the old usage model in IntelFspPkg.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Maurice Ma <maurice.ma@intel.com> Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com> Reviewed-by: Giri P Mudusuru <giri.p.mudusuru@intel.com>
Laszlo Ersek [Wed, 25 May 2016 12:11:14 +0000 (14:11 +0200)]
OvmfPkg/PlatformBootManagerLib: keep the logo after connecting devices
OVMF (unlike ArmVirtPkg) has traditionally cleared the screen after
connecting devices. This is not really necessary, and keeping the logo up
while the progress bar is advancing at the bottom looks great. So don't
clear the screen.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Wed, 25 May 2016 12:00:06 +0000 (14:00 +0200)]
OvmfPkg/PlatformBootManagerLib: bring back the progress bar
OVMF's Platform BDS used to have a nice progress bar (with
IntelFrameworkModulePkg BDS). We can restore it by copying the
PlatformBootManagerWaitCallback() function verbatim from
open-coded the EnableQuietBoot() function (and its dependencies / friends)
from IntelFrameworkModulePkg BDS.
This code duplication can be avoided; the functionality is available from
the following three libraries in MdeModulePkg:
- BootLogoLib: provides the BootLogoEnableLogo() function. It does not
provide the internal ConvertBmpToGopBlt() function -- that one is
delegated to ImageDecoderLib (function DecodeImage()).
- ImageDecoderLib: a general library that registers decoder plugins for
specific image formats, and provides the generic DecodeImage() on top.
- BmpImageDecoderLib: one of said decoder plugins, for handling BMP images
(which is the format of our logo).
In this patch, we revert 817fb3ac2a78, and atomically incorporate the
above libraries. This is inspired by Nt32Pkg commit 859e75c4fc42:
Nt32Pkg: Use BootLogoLib for logo and progress bar drawing.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Wed, 25 May 2016 11:19:41 +0000 (13:19 +0200)]
MdeModulePkg/BootLogoLib: pull GraphicsOutput protocol into class header
The BootLogoUpdateProgress() function uses the
EFI_GRAPHICS_OUTPUT_BLT_PIXEL type in its parameter list, but the protocol
header that defines this type is not included. This breaks dependent C
source files that don't otherwise include the GraphicsOutput protocol
header. Supply the necessary include directive.
(Similarly, BootLogoEnableLogo() uses
EDKII_PLATFORM_LOGO_DISPLAY_ATTRIBUTE in its parameter list. For that
however, the PlatformLogo protocol header is included already.)
Cc: Feng Tian <feng.tian@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Wed, 25 May 2016 22:51:27 +0000 (00:51 +0200)]
Nt32Pkg/PlatformBootManagerLib: zero EFI_GRAPHICS_OUTPUT_BLT_PIXEL.Reserved
The PlatformBootManagerWaitCallback() function sets White.Reserved to
0xFF; it should be 0x00. Also, use a more compact form to assign the
component fields.
Suggested-by: Jordan Justen <jordan.l.justen@intel.com> Cc: Andrew Fish <afish@apple.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Darbin Reyes [Wed, 25 May 2016 22:28:41 +0000 (06:28 +0800)]
MdeModulePkg: Move/Replace NvmExpressHci.h definitions to Nvme.h.
Move NvmExpressHci.h definitions to a public industry standard
header in MdePkg. The NvmExpressHci.h contains definitions based
on the NVMe v1.1 specification. These definitions should be in
a public header so that clients of the NVMe passthru protocol
can use them to execute NVMe commands.
Darbin Reyes [Wed, 25 May 2016 22:28:40 +0000 (06:28 +0800)]
MdePkg: Add a header for NVMe v1.1 spec. definitions.
Adds a public header for NVMe v1.1 spec. definitions. The majority
of these definitions where copied from a private header in
MdeModulePkg/Bus/Pci/NvmExpress/NvmExpressHci.h. Additional
definitions were added e.g. the NVMe Smart Health Log and
Firmware Info. Log structures. These definitions should be
in a public header so that clients of the NVMe passthru protocol
can use them to execute NVMe commands.
Gary Lin [Thu, 26 May 2016 10:24:14 +0000 (18:24 +0800)]
OvmfPkg/SerializeVariablesLib: Relax check for the read-only variable
When OVMF tried to restore the variables from the file-based NvVars, it
failed to set the read-only variable and aborted the restoration with
this message:
Since it's a read-only variable maintained by the firmware, it's
pointless to restore the previous value, so the check can be
relaxed to allow EFI_WRITE_PROTECTED returned from SetVariable.
Cc: Laszlo Ersek <lersek@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gary Lin <glin@suse.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Laszlo Ersek [Thu, 26 May 2016 11:12:14 +0000 (13:12 +0200)]
OvmfPkg/SerializeVariablesLib: convert line endings to uniform CRLF
"SerializeVariablesLib.h" is pure LF, while "SerializeVariablesLib.c" is
mixed (its only CRLF terminators are from commit e678f9db899ad). Convert
them both with "unix2dos".
"git show -b" produces no code hunks for this patch. Due to its simple and
mechanic nature (and because it blocks the application of another patch),
it's being committed without review.
Potentially uninitialized 'Status' might be returned in functions
NvmeCreateIoCompletionQueue() and NvmeCreateIoSubmissionQueue() in file
NvmExpressHci.c.
Laszlo Ersek [Wed, 18 May 2016 18:13:41 +0000 (20:13 +0200)]
OvmfPkg: prevent 64-bit MMIO BAR degradation if there is no CSM
According to edk2 commit
"MdeModulePkg/PciBus: do not improperly degrade resource"
and to the EFI_INCOMPATIBLE_PCI_DEVICE_SUPPORT_PROTOCOL definition in the
Platform Init 1.4a specification, a platform can provide such a protocol
in order to influence the PCI resource allocation performed by the PCI Bus
driver.
In particular it is possible instruct the PCI Bus driver, with a
"wildcard" hint, to allocate the 64-bit MMIO BARs of a device in 64-bit
address space, regardless of whether the device features an option ROM.
(By default, the PCI Bus driver considers an option ROM reason enough for
allocating the 64-bit MMIO BARs in 32-bit address space. It cannot know if
BDS will launch a legacy boot option, and under legacy boot, a legacy BIOS
binary from a combined option ROM could be dispatched, and fail to access
MMIO BARs in 64-bit address space.)
In platform code we can ascertain whether a CSM is present or not. If not,
then legacy BIOS binaries in option ROMs can't be dispatched, hence the
BAR degradation is detrimental, and we should prevent it. This is expected
to conserve the 32-bit address space for 32-bit MMIO BARs.
The driver added in this patch could be simplified based on the following
facts:
- In the Ia32 build, the 64-bit MMIO aperture is always zero-size, hence
the driver will exit immediately. Therefore the driver could be omitted
from the Ia32 build.
- In the Ia32X64 and X64 builds, the driver could be omitted if CSM_ENABLE
was defined (because in that case the degradation would be justified).
On the other hand, if CSM_ENABLE was undefined, then the driver could be
included, and it could provide the hint unconditionally (without looking
for the Legacy BIOS protocol).
These short-cuts are not taken because they would increase the differences
between the OVMF DSC/FDF files. If we can manage without extreme
complexity, we should use dynamic logic (vs. build time configuration),
plus keep conditional compilation to a minimum.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Tue, 17 May 2016 17:22:17 +0000 (19:22 +0200)]
OvmfPkg, ArmVirtPkg: clean up SetBootOrderFromQemu() parameter list
With OvmfPkg's original QemuBootOrderLib (and USE_OLD_BDS) gone, we no
longer need the BootOptionList parameter in the SetBootOrderFromQemu()
prototype. Update the library class header file (including the function's
documentation), and adapt the library instance and the call sites.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Gary Ching-Pang Lin <glin@suse.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Tue, 17 May 2016 16:47:02 +0000 (18:47 +0200)]
OvmfPkg/README: refer to MdeModulePkg & PlatformBootManagerLib in examples
The "UNIXGCC Debug" section happens to name PlatformBdsLib and
IntelFrameworkModulePkg's BdsDxe as examples. OVMF will soon stop offering
those even as a fallback option.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Gary Ching-Pang Lin <glin@suse.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Yonghong Zhu [Fri, 6 May 2016 07:20:23 +0000 (15:20 +0800)]
BaseTools/GenFds: enhance to get TOOL_CHAIN_TAG and TARGET value
when user don't set TOOL_CHAIN_TAG and TARGET by –D Flag, then GenFds
would report failure for format:
FILE DATA = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/testfile
so this patch enhance to get the TOOL_CHAIN_TAG and TARGET value by
following priority (high to low): 1. the Macro value set by -D Flag;
2. Get the value by the -t/-b option. 3. get the value from target.txt
file. Besides, this patch also remove the error checking for missing
-t/-b option.
Marvin H?user [Thu, 19 May 2016 19:04:02 +0000 (03:04 +0800)]
ShellPkg/App: Fix memory leak and save resources.
1) RunSplitCommand() allocates the initial SplitStdOut via
CreateFileInterfaceMem(). Free SplitStdIn after the swap to fix
the memory leak.
2) In RunSplitCommand(), SplitStdOut is checked for equality with
StdIn. This cannot happen due to the if-check within the swap.
Hence remove it.
3) UefiMain() doesn't free SplitList. Delete all list entries and
reinitialize the list when in DEBUG. This does not include the
CreateFileInterfaceMem()-allocated SplitStd mentioned in 1), so
keep the ASSERT() until resolved.
projects / mirror_edk2.git / log