Jeff Fan [Thu, 3 Mar 2016 07:25:26 +0000 (15:25 +0800)]
UefiCpuPkg: Add dynamic type for PcdCpuMaxLogicalProcessorNumber
Currently, PcdCpuMaxLogicalProcessorNumber only supports fixed type. There are
some requests on this PCD to support dynamic type also. For example, platform
may dynamically set this PCD to actual processor count to save memory or improve
boot performance.
Cc: Feng Tian <feng.tian@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com>
Evan Lloyd [Wed, 2 Mar 2016 21:08:46 +0000 (21:08 +0000)]
ArmPkg: Configure TTBCR register
Architecturally, the TTBCR register value is undefined at reset for
Non-Secure.
On some platforms the reset value for TTBCR is not zero and
this causes a data abort exception once the MMU is enabled.
This patch configures the TTBCR register to enable translation table
walk using TTBR0.
Laszlo Ersek [Tue, 26 Jan 2016 00:18:36 +0000 (01:18 +0100)]
OvmfPkg: switch to MdeModulePkg/Bus/Pci/PciHostBridgeDxe
The old driver is retained for now; it remains available with "-D
USE_OLD_PCI_HOST". This is because I'd like to involve end users and
downstreams in testing the new drier, but also allow them to switch back
to the old driver at the first sight of trouble, while we debug the new
driver in parallel.
In a few weeks the ifdeffery and the "OvmfPkg/PciHostBridgeDxe/" driver
should be removed.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Inappropriate here because it consumes
EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL, but
"MdeModulePkg/Bus/Pci/PciHostBridgeDxe" needs the library class for
producing that protocol.
(2) MdePkg/Library/PeiPciSegmentLibPciCfg2/
Restricted to PEIM, SEC, and PEI_CORE client modules.
(3) MdePkg/Library/DxePciSegmentLibEsal/
"uses ESAL services to perform PCI Configuration cycles"
(4) MdePkg/Library/BasePciSegmentLibPci/
A simple BASE library instance that sits on top of PciLib. This is our
choice. We can resolve PciSegmentLib to this instance for all module
types.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We copy the code from InitRootBridge()
[OvmfPkg/PciHostBridgeDxe/PciHostBridge.c], with a slight change: the
device path is allocated separately now.
This is the final field to initialize in PCI_ROOT_BRIDGE.
The type EFI_PCI_ROOT_BRIDGE_DEVICE_PATH is renamed to
OVMF_PCI_ROOT_BRIDGE_DEVICE_PATH. The original is a misnomer (it is not a
standard UEFI type) that dates back to PcAtChipsetPkg/PciHostBridgeDxe.
Simply removing the EFI_ suffix would result in
PCI_ROOT_BRIDGE_DEVICE_PATH, where PCI_ could incorrectly suggest a
relation with the PCI standards or the PCI-related generic edk2 code.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Fri, 26 Feb 2016 23:06:39 +0000 (00:06 +0100)]
OvmfPkg: PciHostBridgeLib: set RootBus->NoExtendedConfigSpace
In "OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c", the
RootBridgeIoCheckParameter() function hard-codes the maximum offset for
the PCI config space as 0xFF (see the MAX_PCI_REG_ADDRESS macro), which
matches OVMF's 0xCF8 / 0xCFC config access method.
The "MdeModulePkg/Bus/Pci/PciHostBridgeDxe" driver abstracts away config
space access via the PciSegmentLib class, so it has to be informed
separately about the config space size.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Mon, 25 Jan 2016 23:36:46 +0000 (00:36 +0100)]
OvmfPkg: PciHostBridgeLib: set bus, IO and 32-bit MMIO windows in RootBus
The bus aperture is copied verbatim from InitRootBridge()
[OvmfPkg/PciHostBridgeDxe/PciHostBridge.c].
The IO and 32-bit MMIO apertures are matched to PlatformPei's settings.
PciHostBridgeLibDxe expects PciHostBridgeLib instances to advertize the
exact apertures.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Mon, 25 Jan 2016 23:11:43 +0000 (00:11 +0100)]
OvmfPkg: PciHostBridgeLib: set RootBus->AllocationAttributes
InitRootBridge() in "OvmfPkg/PciHostBridgeDxe/PciHostBridge.c" passes the
EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM allocation attribute to
RootBridgeConstructor(); we should do the same here.
From "MdePkg/Include/Protocol/PciHostBridgeResourceAllocation.h":
/// If this bit is set, then the PCI Root Bridge does not support separate
/// windows for Non-prefetchable and Prefetchable memory. A PCI bus driver
/// needs to include requests for Prefetchable memory in the
/// Non-prefetchable memory pool.
Which implies that both the 32-bit and 64-bit prefetchable MMIO apertures
should be marked empty. (The CreateRootBridge() function actually enforces
this in "MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c".)
Furthermore, since OvmfPkg/PciHostBridgeDxe does *not* set the
EFI_PCI_HOST_BRIDGE_MEM64_DECODE allocation attribute:
/// If this bit is set, then the PCI Root Bridge supports 64 bit memory
/// windows. If this bit is not set, the PCI bus driver needs to include
/// requests for 64 bit memory address in the corresponding 32 bit memory
/// pool.
we follow suit in the PciHostBridgeLib instance.
In turn, the 64-bit MMIO apertures (both prefetchable and
non-prefetchable) should be marked empty.
MdeModulePkg/Bus/Pci/PciHostBridgeDxe enforces this too.
(64-bit MMIO aperture support, based on yet more fw_cfg files, is a
planned future improvement.)
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
When this BOOLEAN member is FALSE, and the caller tries to set up a DMA
transfer between a PCI device and a host buffer not entirely under 4GB,
then "MdeModulePkg/Bus/Pci/PciHostBridgeDxe" sets up a bounce buffer under
4GB, in the implementation of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.Map().
Since that's exactly what RootBridgeIoMap() does in
"OvmfPkg/PciHostBridgeDxe/PciRootBridgeIo.c", stick with it in this
conversion.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Mon, 25 Jan 2016 21:47:00 +0000 (22:47 +0100)]
OvmfPkg: PciHostBridgeLib: convert main loop from PciHostBridgeDxe
In this patch we import the scan for extra root buses from the
InitializePciHostBridge() function, in file
"OvmfPkg/PciHostBridgeDxe/PciHostBridge.c".
For the time being, the InitRootBridge() and UninitRootBridge() functions
are just placeholders.
The PciHostBridgeGetRootBridges() API expects us to return the
PCI_ROOT_BRIDGE structures in a contiguous array, instead of a linked
list. Therefore the following bits have to be converted manually:
(1) The array is allocated in advance, in a single step.
(2) The calculation of the array size depends on an explicit
multiplication, which we must check against overflow. Since more than
255 extra root bridges make no sense anyway, we use (1 + 255) as the
limit on the main plus all extra root bridges. This also ensures that
the UINTN multiplication doesn't overflow.
(3) The PciHostBridgeDxe code decrements "ExtraRootBridgesLeft" to
terminate the scanning early. Here we need track the increasing count
of used array elements as well, so we employ "ExtraRootBridges" as a
constant limit, and increment the new local variable "Initialized".
(4) The prototypes of InitRootBridge() and UninitRootBridge() reflect that
the PCI_ROOT_BRIDGE structure is allocated by the caller; only
in-place initialization is necessary.
Additionally, macros are employed for standard PCI quantities, from
"MdePkg/Include/IndustryStandard/Pci22.h":
- MAX_PCI_DEVICE_NUMBER (31) is replaced with PCI_MAX_DEVICE (same),
- the constant 255 is replaced with PCI_MAX_BUS,
- the (RootBridgeNumber < 256) condition is replaced with
(RootBridgeNumber <= PCI_MAX_BUS).
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Mon, 25 Jan 2016 19:33:32 +0000 (20:33 +0100)]
OvmfPkg: clone PciHostBridgeLib from MdeModulePkg's Null instance
In this patch we clone "MdeModulePkg/Library/PciHostBridgeLibNull" for
customization under OvmfPkg. Differences relative to a verbatim copy:
- the Null suffix is dropped from file names,
- the UNI file is dropped, together with the corresponding MODULE_UNI_FILE
reference in the INF file,
- the INF file receives a new FILE_GUID,
- the top comments in the files mention OVMF, not a null instance.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Fri, 26 Feb 2016 15:29:19 +0000 (16:29 +0100)]
OvmfPkg: factor the MMIO aperture shared by all PCI root bridges into PCDs
Going forward, two modules will need to know about the aperture:
PlatformPei (as before), and OVMF's upcoming PciHostBridgeLib instance
(because the core PciHostBridgeDxe driver requires the library to state
the exact apertures for all root bridges).
On QEMU, all root bridges share the same MMIO aperture, hence one pair of
PCDs suffices.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Fri, 26 Feb 2016 15:29:19 +0000 (16:29 +0100)]
OvmfPkg: factor the IO aperture shared by all PCI root bridges into PCDs
At the moment we don't intend to customize this aperture at runtime, but
going forward, two modules will need to know about it: PlatformPei (as
before), and OVMF's upcoming PciHostBridgeLib instance (because the core
PciHostBridgeDxe driver requires the library to state the exact apertures
for all root bridges).
On QEMU, all root bridges share the same IO port aperture, hence one pair
of PCDs suffices.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Laszlo Ersek [Fri, 26 Feb 2016 22:09:46 +0000 (23:09 +0100)]
MdeModulePkg: PciHostBridgeDxe: don't assume extended config space
The "pc" ("pc-i440fx-*") machine types of QEMU don't support extended
config space. Accordingly, OVMF will use the following library instances
in connection with the core PciHostBridgeDxe driver:
Add a new field to the PCI_ROOT_BRIDGE structure so that
RootBridgeIoCheckParameter() can catch config space offsets above 0xFF on
such old (emulated) platforms.
Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Jiaxin Wu [Wed, 2 Mar 2016 07:58:25 +0000 (15:58 +0800)]
ShellPkg: Update 'ifconfig -r' implementation
This patch is used to update ifconfig -r implementation
to sync with UEFI Shell 2.2.
option -r means to reconfigure all or specified interface,
and set DHCP policy. If specified interface is already set
to DHCP, then refresh the IPv4 configuration.
If the interface name is specified
with '-r', DHCP DORA process will be triggered by the policy
transition (static -> dhcp).
ShellPkg: Increase reallocation size for temp memory files
If data of any real size were to be piped from one command to another,
an inordinate amount of time could be taken up by reallocating memory
that is only 10 bytes bigger than what is currently needed. Also, this
could cause unwelcome memory fragmentation.
Added a define to control how much memory is reallocated beyond that
which is currently needed. Set it to 1K vs. the original 10 bytes.
ShellPkg: Add FileSize member to shell memory file structure.
The shell uses the memory file structure to manage temporary files in
memory that support piping of output from one command into the the
input of another command. The BufferSize member is the size of the
internal buffer, not the size of the data that was written to the
file. So, it was possible to read beyond the EOF of these files as
reads used BufferSize. Now FileSize tracks the actual size of these
files (the number of bytes written, not the number of bytes available
in the buffer), and the reads use this member.
Yonghong Zhu [Tue, 1 Mar 2016 04:41:30 +0000 (12:41 +0800)]
BaseTools/LZMA: fix the format issue for last patch
There are no functional changes in this patch. fixing the format base on
last commit.
The only change is 1) add back the blank line, which can help we better
compare with the original LZMA source code. 2) remove the indent of
#ifndef and #endif.
Jeff Fan [Wed, 2 Mar 2016 01:45:14 +0000 (09:45 +0800)]
UefiCpuPkg/CpuMpPei: Load microcode if found newer revision
Current implementation only loads the latest revision if there is no microcode
loaded. Per IA32 User Manual, we should load the newer revision by comparing
the existing microcode loaded with the updating revision.
Cc: Feng Tian <feng.tian@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Feng Tian <feng.tian@intel.com> Reviewed-by: Michael Kinney <michael.d.kinney@intel.com>
Jiaxin Wu [Thu, 25 Feb 2016 02:52:13 +0000 (10:52 +0800)]
NetworkPkg: Change the default IPv6 config policy
The default policy for Ip6Config is Ip6ConfigPolicyAutomatic,
which results in all NIC ports starting SARR process when it
receives RA message with M flag from IPv6 router. So, this
patch is used to changes the the default IPv6 config policy to
Ip6ConfigPolicyManualand also defer the SetData operation after
Ip6ConfigProtocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip6ConfigProtocol.
Cc: Subramanian Sriram <sriram-s@hpe.com> Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Subramanian Sriram <sriram-s@hpe.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
Jiaxin Wu [Thu, 25 Feb 2016 02:48:58 +0000 (10:48 +0800)]
MdeModulePkg: Change the default IPv4 config policy
Git version '3d0a49ad' commit provided a scenario to resolve the
performance issue for IPv4, but it's not workable for IPv6. To
avoid IPv4 and IPv6 inconsistency, we decided to revert that version
fix.
If so, the default policy for Ip4Config2 is Ip4Config2PolicyDhcp,
which results in all NIC ports attempting DHCP. So, this patch is
used to changes the the default IPv4 config policy to
Ip4Config2PolicyStatic and also defer the SetData operation after
Ip4Config2Protocol installed. This update let the other platform
drivers have chance to change the default config data by consume
Ip4Config2Protocol.
Cc: Subramanian Sriram <sriram-s@hpe.com> Cc: El-Haj-Mahmoud Samer <samer.el-haj-mahmoud@hpe.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Subramanian Sriram <sriram-s@hpe.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
Dandan Bi [Tue, 1 Mar 2016 06:36:46 +0000 (14:36 +0800)]
MdeModulePkg: FileExplorerLib: Modify the EFI_FILE_EXPLORE_FORMSET_GUID
Currently the EFI_FILE_EXPLORE_FORMSET_GUID value in BdsDxe in
IntelFrameworkModulePkg is same with the GUID VALUE in FileExplorerLib.
This patch is to modify the EFI_FILE_EXPLORE_FORMSET_GUID in
FileExplorerLib to avoid potential issue.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Dandan Bi [Mon, 29 Feb 2016 02:08:47 +0000 (10:08 +0800)]
MdeModulePkg: FileExplorerLib: Add check when to call FreePool function
when free up resource allocated for a MenuEntry, there exists
the case that the DevicePath and DisplayString are NULL,
so before calling FreePool function, need to check.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
ShellPkg: Don't strip BOM when piping UCS2 data to a UEFI app
If the BOM is stripped from StdIn, then an app that duplicates StdIn
will not be able to duplicate, say, a UCS2 file that was piped into
it (the output file it creates would not start with a BOM).
Ryan Harkin [Tue, 1 Mar 2016 08:23:20 +0000 (08:23 +0000)]
ArmPlatformPkg/PL180MciDxe: don't check ID_REG3
TC2 reads 0x02 for the PL180 ID3 register instead of 0x00 as defined in
the spec.
However, the spec [1] states that the contents of ID3 register represent
the "configuration option of the peripheral" and thus not part of the
Prime Cell identification.
For this patch, we drop checking the value in MCI_PERIPH_ID_REG3.
Ryan Harkin [Tue, 1 Mar 2016 07:44:39 +0000 (07:44 +0000)]
ArmPlatformPkg/PL180MciDxe: fix Depex for TC2
PL180 on TC2 has a dependency on gEfiCpuArchProtocolGuid. Without
adding the dependency, TC2 will crash in the PL180 driver.
This problem has been present since d340ef7 when TC2 stopped booting.
However, it was masked by 300fc77 which prevented PL180 from running on
TC2 due to TC2 using a version on PL180 newer than that documented
publicly.
[1] https://github.com/tianocore/edk2/commit/d340ef7
2014-08-26
ArmPkg/ArmArchTimerLib: Remove non required [depex] and IoLib
[2] https://github.com/tianocore/edk2/commit/300fc77
2015-08-25
ArmPlatformPkg/PL180MciDxe: check PrimeCell ID before initializing
In the recent migration of the ARM Ltd. platforms to
https://git.linaro.org/uefi/OpenPlatformPkg.git, this file unfortunately
got left behind. Delete it to reduce confusion and (further) risk of
duplication of effort.
Ard Biesheuvel [Mon, 29 Feb 2016 16:08:45 +0000 (17:08 +0100)]
MdeModulePkg: DxeCore: fully initialize image context before passing it on
When the DXE core is loaded, it invokes the PeCoffExtraActionLib library
function 'PeCoffLoaderRelocateImageExtraAction' explicitly, which may be
in addition to the same function having been called by the DxeIpl PE/COFF
loader instance.
The ImageContext that DXE core presents to this function is only partially
initialized, which may result in the following output on AArch64 systems:
This is caused by incorrect data in the ImageContext structure, which means
the start of the .text section is calculated incorrectly. In general, it is
the duty of the caller to present a valid ImageContext structure, so let's
add the missing values before invoking PeCoffLoaderRelocateImageExtraAction().
Fu Siyuan [Mon, 29 Feb 2016 05:51:02 +0000 (13:51 +0800)]
MdeModulePkg: Add new API HttpUrlGetPath() to HttpLib.h
This patch is to add a new interface to get the "Path" component according to
the URI parse result, it would be helpful for the library user to extract the
file path value in a URI.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com>
Cinnamon Shia [Mon, 22 Feb 2016 02:53:14 +0000 (10:53 +0800)]
MdeModulePkg/HiiDatabaseDxe: Fix a variable is uninitialized.
The StringSize variable in the FindStringBlock function is a IN OUT
parameter of the GetUnicodeStringTextOrSize function.
Thought the GetUnicodeStringTextOrSize function changes the value of
the StringSize variable, it is better to initialize the StringSize
variable before passing it to the GetUnicodeStringTextOrSize function.
Liming Gao [Sat, 6 Feb 2016 01:02:57 +0000 (09:02 +0800)]
MdeModulePkg: Update PeiCore dispatcher to handle PEIM and PEI_CORE only
When PcdShadowPeimOnBoot is FALSE, they are not copied to memory and
execute from their original locations. Here, this policy should only
apply for PEIM and PEI_CORE, not for other file type, such as DXE_CORE.
The RamDiskDxe driver will:
1. Produce the EFI RAM Disk Protocol
2. Install RAM disk device path and block I/O related protocols on the
RAM disk device handle.
3. Install RAM disk configuration form to HII database
Ruiyu Ni [Wed, 17 Feb 2016 10:06:36 +0000 (18:06 +0800)]
MdeModuelPkg/PciBus: Return AddrTranslationOffset in GetBarAttributes
Some platform doesn't use CPU(HOST)/Device 1:1 mapping for PCI Bus.
But PCI IO doesn't have interface to tell caller (device driver)
whether the address returned by GetBarAttributes() is HOST address
or device address.
UEFI Spec 2.6 addresses this issue by clarifying the address returned
is HOST address and caller can use AddrTranslationOffset to calculate
the device address.
Zhang Lubo [Wed, 24 Feb 2016 03:54:53 +0000 (11:54 +0800)]
MdeModulePkg:Fix a robustness issue of Mnp Driver
v3:
*
When there exists duplicate items in VLAN variable , save the correct
variable content back to the variable storage after duplicate items are removed
Duplicate items in VLAN variable will cause MNP driver binding
start function fall into infinite loop,so we should check it's
content before using it.
Cc: Fu Siyuan <siyuan.fu@intel.com> Cc: Ye Ting <ting.ye@intel.com> Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Zhang Lubo <lubo.zhang@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Qiu Shumin [Fri, 26 Feb 2016 06:52:18 +0000 (14:52 +0800)]
ShellPkg: Fix unexpected behavior of mouse cursor in Editor.
USB mouse cursor cannot move unless the left button is down. The patch
refresh the FileBuffer of Editor every time when the 'MainEditorRefresh'
is called to fix this bug.
Laszlo Ersek [Wed, 24 Feb 2016 20:00:04 +0000 (21:00 +0100)]
MdeModulePkg: RegularExpressionDxe: support free(NULL)
The ISO C standard says about free(),
If ptr is a null pointer, no action occurs.
This is not true of the FreePool() interface of the MemoryAllocationLib
class:
Buffer must have been allocated on a previous call to the pool
allocation services of the Memory Allocation Library. [...] If Buffer
was not allocated with a pool allocation function in the Memory
Allocation Library, then ASSERT().
Therefore we must not forward the argument of free() to FreePool() without
checking.
Leif Lindholm [Wed, 28 Oct 2015 18:08:53 +0000 (18:08 +0000)]
ArmPlatformPkg: PL061 - only initialize on protocol load
For whatever reason, every single operation on the PL061 looked for an
"Initialized" flag, and manually called the initialization function if
not set. Move this to a single call on protocol installation.
Ard Biesheuvel [Thu, 25 Feb 2016 16:20:21 +0000 (17:20 +0100)]
MdeModulePkg: AcpiTableDxe: fix VS2008 build by merging adjacent if blocks
The assignment of CurrentRsdtEntry and its subsequent dereference are
subject to the same condition, but for some reason, VS2008 does not see
that and warns about the dereference possibly involving an uninitialized
pointer. Since the single statememt between the blocks is unrelated, we
can just move it and merge the two conditional blocks together.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Ruiyu Ni [Thu, 25 Feb 2016 09:13:31 +0000 (17:13 +0800)]
MdeModulePkg/PciHostBridge: Don't assume resources are fully NonExistent
The patch removes the assumption that the resources claimed by root
bridges should not exist. Because resources might have been added:
1. by platform modules either in PEI through resource HOB, or in DXE,
before the PCI host bridge driver runs.
2. Resources claimed by different root bridges may overlap so that
resource adding operation for latter root bridges may fail if
we assume the resource should not exist.
In real world, this patch is to fit OVMF platform needs because
different root bridges in OVMF platform shares the same resources.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
[lersek@redhat.com: intersection-based implementation]
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Dandan Bi [Thu, 28 Jan 2016 01:36:43 +0000 (09:36 +0800)]
SecurityPkg: Use FileExplorerLib in SecureBootConfigDxe
Using existing library FileExplorerLib to replace the same
logic in SecureBootConfigDxe to make the code clear. After using
FileExplorerLib, the UI behavior for enroll PK will change,
previously when select one PK file, commit/discard changes will
return to Device Manager,press ESC will return to FileExplorer.
Now using FileExplorerLib the behavior will keep same with
enroll KEK/DB/..., commit/discard changes will return to Custom
Secure Boot Options form and ESC will return to PK options form.
Dandan Bi [Wed, 24 Feb 2016 12:20:24 +0000 (20:20 +0800)]
Vlv2TbltDevicePkg: Add FileExplorerLib.inf to the dsc file
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc file of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: David Wei <david.wei@intel.com> Cc: Tim He <tim.he@intel.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: David Wei <david.wei@intel.com>
Dandan Bi [Wed, 24 Feb 2016 12:18:53 +0000 (20:18 +0800)]
OvmfPkg: Add FileExplorerLib.inf to the dsc file
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc file of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Dandan Bi [Wed, 24 Feb 2016 12:15:52 +0000 (20:15 +0800)]
ArmVirtPkg: Add FileExplorerLib.inf to the QEMU dsc files
Because SecureBootConfigDxe use FileExplorerLib now, but
FileExplorerLib is not in the dsc files of the package
that use SecureBootConfigDxe. Now add it to pass build.
Cc: Laszlo Ersek <lersek@redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
When a PCI bridge is not enabled, the secondary bus may still be zero.
This causes an infinite recursive call to enumerate bus 0 which results
in a stack overflow. The easy fix is to skip the recursive bus
enumeration for bridges which do not have the secondary bus initialized.
TEST=Build and run CorebootPayloadPkg on Quark/Galileo Gen2
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Laszlo Ersek [Wed, 24 Feb 2016 20:00:04 +0000 (21:00 +0100)]
CryptoPkg: BaseCryptLib: support free(NULL)
The ISO C standard says about free(),
If ptr is a null pointer, no action occurs.
This is not true of the FreePool() interface of the MemoryAllocationLib
class:
Buffer must have been allocated on a previous call to the pool
allocation services of the Memory Allocation Library. [...] If Buffer
was not allocated with a pool allocation function in the Memory
Allocation Library, then ASSERT().
Therefore we must not forward the argument of free() to FreePool() without
checking.
This bug can be triggered by upstream OpenSSL commit 8e704858f219
("RT3955: Reduce some stack usage"), for example.
Cc: David Woodhouse <dwmw2@infradead.org> Cc: Qin Long <qin.long@intel.com> Cc: Ting Ye <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Qin Long <qin.long@intel.com>
Dandan Bi [Tue, 23 Feb 2016 03:04:20 +0000 (11:04 +0800)]
MdeModulePkg: Add submitted callback test case in DriverSample
Now we add new HII action type EFI_BROWSER_ACTION_SUBMITTED in
EFI HII Configuration Access Protocol, so add the test case in
DriverSample to show how to use it and whether it works.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Michael Kinney [Fri, 19 Feb 2016 07:16:02 +0000 (23:16 -0800)]
UefiCpuPkg/Cpuid: Add UEFI CPUID application
Add UEFI application to UefiCpuPkg to display all supported CPUID
leafs and sub-leafs described by UefiCpuPkg/Include/Register/Cpuid.h
that is based on information from Intel(R) 64 and IA-32
Architectures Software Developer's Manual, Volume 2A, December
2015, CPUID instruction.
Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Michael Kinney [Fri, 19 Feb 2016 07:15:48 +0000 (23:15 -0800)]
UefiCpuPkg/Cpuid.h: Add CPUID leaf/sub-leaf defines and structures
Add CPUID leaf and sub-leaf indexes and structures as described by
Intel(R) 64 and IA-32 Architectures Software Developer's Manual,
Volume 2A, December 2015, CPUID instruction.
Cc: Jeff Fan <jeff.fan@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
Michael Kinney [Tue, 23 Feb 2016 00:46:06 +0000 (16:46 -0800)]
BaseTools/tools_def.txt: Add -march=i586 for IA32 GCC targets
Newer GCC compilers use a default of march higher than i586
for -m32 (IA32 configuration) and this is causing generation of
instructions that are not compatible with all IA32 targets.
Specically Galileo platform support in the QuarkPlatformPkg does
not boot if GCC48 or higher is used.
This is similar to the following checkin that was done to address
this same issue for VS2012 and higher tool chains:
Jiewen Yao [Tue, 23 Feb 2016 04:43:57 +0000 (12:43 +0800)]
MdeModulePkg: Fix Memory Attributes table type issue
According to the spec, each entry in the Memory
Attributes table shall have the same type as
the region it was carved out of in the UEFI memory map.
The current attribute uses RTData for PE Data, but
it should be RTCode.
This patch fixed the issue. It is validated with or
without PropertiesTable.
Dandan Bi [Wed, 24 Feb 2016 01:03:22 +0000 (09:03 +0800)]
MdeModulePkg: Fix the build fail issue on VS2008\VS2010\GCC
This is caused by my last commit,the LoadOption may
not initialize when call FreePool, and after investigation,
find that we can delete the LoadOption variable, this patch
is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
projects / mirror_edk2.git / log