Star Zeng [Sat, 12 Jan 2019 15:23:30 +0000 (23:23 +0800)]
MdeModulePkg: Remove EmuVariableRuntimeDxe
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
The real variable driver has been updated to support emulated
variable NV mode.
This patch removes EmuVariableRuntimeDxe after platforms are
migrated to use the merged variable driver.
Today's MtrrLib contains a bug, for example:
when the original cache setting is WB for [0xF_0000, 0xF_8000) and,
a new request to set [0xF_0000, 0xF_4000) to WP,
the cache setting for [0xF_4000, 0xF_8000) is reset to UC.
The reason is when MtrrLibSetBelow1MBMemoryAttribute() is called the
WorkingFixedSettings doesn't contain the actual MSR value stored in
hardware, but when writing the fixed MTRRs, the code logic assumes
WorkingFixedSettings contains the actual MSR value.
The new fix is to change MtrrLibSetBelow1MBMemoryAttribute() to
calculate the correct ClearMasks[] and OrMasks[], and use them
directly when writing the fixed MTRRs.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com> Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Shenglei Zhang [Mon, 18 Feb 2019 08:20:37 +0000 (16:20 +0800)]
MdeModulePkg/PropertiesTableAttributesDxe: Remove this driver
This functionality of this driver has been deprecated and
no platform employs this driver. It can be removed completely.
https://bugzilla.tianocore.org/show_bug.cgi?id=1475
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Hao Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Shenglei Zhang [Thu, 14 Feb 2019 02:43:10 +0000 (10:43 +0800)]
MdePkg/BaseLib: Change a variable type in a bitwise operation
Change the type of variable Chr from CHAR8 to UINT32 in a
bitwise operation, to make the two variables in the operation
have the same size.
https://bugzilla.tianocore.org/show_bug.cgi?id=1527
According to PI1.7 Spec, report extended data describing an
EFI_STATUS return value along with
EFI_SW_DXE_BS_EC_BOOT_OPTION_LOAD_ERROR and
EFI_SW_DXE_BS_EC_BOOT_OPTION_FAILED status code
when fail to load or start boot option image.
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Hao Wu <hao.a.wu@intel.com> Cc: Ruiyu Ni <ruiyu.ni@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Sean Brogan <sean.brogan@microsoft.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
When report status code with ExtendedData data,
and the extended data can fit in the local static buffer,
there is no need to use AllocatePool to hold the ExtendedData data.
This patch is just to do the enhancement to avoid using AllocatePool.
Cc: Star Zeng <star.zeng@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Hao Wu <hao.a.wu@intel.com> Cc: Michael Turner <Michael.Turner@microsoft.com> Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Dandan Bi <dandan.bi@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Feng, Bob C [Fri, 1 Feb 2019 08:51:43 +0000 (16:51 +0800)]
BaseTools: Fix the build report issue about Structure PCD
https://bugzilla.tianocore.org/show_bug.cgi?id=1472
build report use incorrect method to parse DynamicDefault/DynamicExDefault
and DynamicVpd/DynamicExVpd structure Pcd value.
Pete Batard [Mon, 4 Feb 2019 12:47:36 +0000 (12:47 +0000)]
EmbeddedPkg/Library: Add VirtualRealTimeClockLib
This is designed to be used on platforms where a a real RTC is not
available and relies on an RtcEpochSeconds variable having been set or,
if that is not the case, falls back to using the epoch embedded at
compilation time.
Note that, in order to keep things simple for the setting of the
compilation time variable, only GCC environments with UNIX-like shells
and where a 'date' command is available are meant to be supported for
now.
EFI_PEI_CORE_FV_LOCATION_PPI may be passed by platform
when PeiCore not in BFV so SecCore has to search PeiCore
either from the FV location provided by
EFI_PEI_CORE_FV_LOCATION_PPI or from BFV.
Test: Verified on internal platform and booting successfully.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Chasel Chiu <chasel.chiu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Shenglei Zhang [Tue, 29 Jan 2019 08:16:36 +0000 (16:16 +0800)]
OvmfPkg/README: Remove UNIXGCC
Remove UNIXGCC in OvmfPkgIa32.dsc, OvmfPkgIa32X64.dsc
and OvmfPkgX64.dsc.
Remove content related to UNIXGCC in README.
https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Shenglei Zhang [Thu, 31 Jan 2019 08:24:08 +0000 (16:24 +0800)]
BaseTools/tools_def.template: Remove VS2003 and VS2005
VS2003 and VS2005 are too old.There is no verification
for them.
https://bugzilla.tianocore.org/show_bug.cgi?id=1377
v3:1.Instead of removing MS_VS_BIN, change MS_VS_BIN from
VS2005_BIN to VS2008_BIN.
2.Instead of removing MS_VS_DLL, change MS_VS_DLL from
VS2005_DLL to VS2008_DLL.
Shenglei Zhang [Fri, 25 Jan 2019 07:52:46 +0000 (15:52 +0800)]
MdePkg: Change function parameter type
Change type of parameter Opcode from UINT16 to UINTN
in EFI_S3_SAVE_STATE_WRITE and EFI_S3_SAVE_STATE_INSERT.
According to PI 1.6(Errata A), the type of Opcode in
EFI_S3_SAVE_STATE_WRITE and EFI_S3_SAVE_STATE_INSERT should
be UINTN not UINT16.
https://bugzilla.tianocore.org/show_bug.cgi?id=1517
When a device under PPB contains option ROM but doesn't require 32bit
MMIO, ProgrameUpstreamBridgeForRom() cannot correctly restore the
PPB MEM32 RANGE BAR. It causes the 32bit MMIO conflict which may
cause system hangs in boot.
The root cause is when ProgrameUpstreamBridgeForRom() calls
ProgramPpbApperture() to restore the PPB MEM32 RANGE BAR, the
ProgramPpbApperture() skips to program the BAR when the resource
length is 0.
This patch fixes this issue by not calling ProgramPpbApperture().
Instead, it directly programs the PPB MEM32 RANGE BAR.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Hao Wu <hao.a.wu@intel.com> Cc: Dandan Bi <dandan.bi@intel.com>
Eric Dong [Thu, 14 Feb 2019 05:37:27 +0000 (13:37 +0800)]
SecurityPkg/OpalPassword: Update strings on Opal Setup page
https://bugzilla.tianocore.org/show_bug.cgi?id=1506
Updated some descriptions on SETUP page to avoid user confusion.
Currently it shows "1.0 UEFI Opal Driver", however it may be mislead user to think
it is only for Opal drive but not for Pyrite drive.
Chen A Chen [Mon, 11 Feb 2019 05:42:19 +0000 (13:42 +0800)]
MdeModulePkg/CapsuleApp: Fix memory leak issue.
This issue is caused by FileInfoBuffer variable. This is a pointer array
and each elements also pointer to a memory buffer that is allocated and
returned by AllocateCopyPool function.
Laszlo Ersek [Wed, 6 Feb 2019 09:08:53 +0000 (10:08 +0100)]
ArmVirtPkg/ArmVirtXen: don't set Pcd*ImageVerificationPolicy
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-1}
(6 builds in total), PcdOptionRomImageVerificationPolicy,
PcdFixedMediaImageVerificationPolicy, and
PcdRemovableMediaImageVerificationPolicy are not used in any of those
builds.
Restrict the settings to the ArmVirtQemu and ArmVirtQemuKernel platforms
(preserving the -D SECURE_BOOT_ENABLE restriction in the process).
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Laszlo Ersek [Wed, 6 Feb 2019 09:08:53 +0000 (10:08 +0100)]
ArmVirtPkg: don't set PcdDebugClearMemoryValue
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Qemu,QemuKernel,Xen} x {RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds.
Rather than just restrict the PCD setting to ($(TARGET) != RELEASE),
remove the setting completely. The current value is identical to the 0xAF
default in "MdePkg/MdePkg.dec", which recognizes Andrew Fish, and so it's
unlikely to ever change.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Laszlo Ersek [Tue, 5 Feb 2019 23:58:56 +0000 (00:58 +0100)]
ArmVirtPkg: clean up PcdSetNxForStack setting (applies to ArmVirtQemu only)
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds.
Move the setting from "ArmVirt.dsc.inc" to "ArmVirtQemu.dsc", to reflect
reality.
We originally moved the PCD setting in the opposite direction in commit 8aab575c26e9 ("ArmVirtPkg: enable non-executable DXE stack for all
platforms", 2017-03-07), generalizing it. However, as the comment itself
states, and according to all 36 ArmVirt build reports:
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
the PCD is only consumed by "MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf", and
that module is only included in the ArmVirtQemu platform.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
According to the information of the above BZ-1408 and other platform
owners, NVM Express devices are becoming more likely to be a critical
part during the boot process.
This commit will add the calls to 'REPORT_STATUS_CODE' when there is a
failure happens during the NVM Express controller/device initialization
process.
Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Bret Barkelew <brbarkel@microsoft.com> Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Hao Wu <hao.a.wu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
Ard Biesheuvel [Wed, 6 Feb 2019 00:08:22 +0000 (00:08 +0000)]
MdePkg/BaseLib: implement SpeculationBarrier() for ARM and AArch64
Replace the dummy C implementation of SpeculationBarrier() with
implementations consisting of the recommended DSB SY + ISB sequence,
as recommended by ARM in the whitepaper "Cache Speculation Side-channels"
version 2.4, dated October 2018.
To avoid potential NULL pointer dereference issue. Initialize them at
the beginning of the function. This patch is a supplement which was missed
at e98212cb5d59fff8f385d9179ad7f1a3ce9cf215 commit.
Stefan Berger [Fri, 25 Jan 2019 21:30:29 +0000 (16:30 -0500)]
OvmfPkg: Add TCG2 Configuration menu to the Device Manager menu
This patch adds the TCG2 Configuration menu to the Device Manager
menu. We can apparently reuse the sample Tcg2ConfigDxe from
SecurityPkg/Tcg/Tcg2Config without obvious adverse effects. The
added TCG2 Configuration menu now shows details about the attached
TPM 2.0 and lets one for example configure the active PCR banks
or issue commands, among other things.
The code is added to Ovmf by building with -DTPM2_ENABLE and
-DTPM2_CONFIG_ENABLE.
Liming Gao [Mon, 14 Jan 2019 02:31:27 +0000 (10:31 +0800)]
MdeModulePkg DxeCapsuleLibFmp: Update SupportCapsuleImage() for Fake Capsule
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1088
Per UEFI spec, the fake capsule image with the header only is a valid case
in QueryCapsuleCpapbilities(). So, SupportCapsuleImage() is updated to
support this case.
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Liming Gao <liming.gao@intel.com> Cc: Star Zeng <star.zeng@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
BaseTools: Fix build failure when specifying multiple BUILDTARGET
With Python3, the dict.value() method returns an iterator.
If a dictionary is updated while an iterator on its keys is used,
a RuntimeError is generated.
Converting the iterator to a list() forces a copy of the mutable
keys in an immutable list which can be safely iterated.
Commit f8d11e5a4aaa converted various uses but missed one:
When specifying multiple BUILDTARGET, the first target builds
successfully, but then the PGen.BuildDatabase._CACHE_ dictionary is
updated, and accessing the next target triggers a RuntimeError.
Convert this iterator to an immutable list, to solve this build error:
(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)
(Python 3.5.3 on linux) Traceback (most recent call last):
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2387, in Main
MyBuild.Launch()
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2141, in Launch
self._MultiThreadBuildPlatform()
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1921, in _MultiThreadBuildPlatform
self.Progress
File "BaseTools/Source/Python/AutoGen/AutoGen.py", line 304, in __init__
self._InitWorker(Workspace, MetaFile, Target, Toolchain, Arch, *args, **kwargs)
File "BaseTools/Source/Python/AutoGen/AutoGen.py", line 477, in _InitWorker
for BuildData in PGen.BuildDatabase._CACHE_.values():
RuntimeError: dictionary changed size during iteration
Note: The culprit commit (f8d11e5a4aaa) can not be found with bisection.
In 9c2d68c0a299 the build tools default to the python version provided
by the ${PYTHON} environment variable, however the Python3 transition is
not functional before d943b0c339fe. f8d11e5a4aaa falls between the
previous two.
Laszlo Ersek [Tue, 5 Feb 2019 11:22:13 +0000 (03:22 -0800)]
BaseTools/BuildReport: fix report for platforms/arches without struct PCDs
The goal of commit 97c8f5b9e7d3 ("BaseTools:StructurePCD value display
incorrect in "Not used" section.", 2019-02-02) was to display the full
contents of such structure PCDs in the build report that were set in the
platform DSC or the FDF, but not used in any module INFs. The listings
would appear in the
PCDs not used by modules or in conditional directives
section of the build report.
Commit 97c8f5b9e7d3 assumed that any (platform, architecture) combination
would have a (possibly empty) set of structure PCD (and so the set of the
structure PCDs could be filtered for set-but-unused ones).
This is not the case: in "DscBuildData.py", in method
UpdateStructuredPcds(), if "S_pcd_set" remains an empty OrderedDict(),
then it is not added to "GlobalData.gStructurePcd" *at all*, for the
current (platform, architecture) combination.
As a result, when the PCD report tries to fetch the set of structure PCDs
for the current (platform, architecture), "GlobalData.gStructurePcd" does
not return an empty OrderedDict(); instead, it raises a KeyError. Fix it
by defaulting to an empty OrderedDict(), with the get() method.
Leif Lindholm [Thu, 1 Nov 2018 15:01:48 +0000 (15:01 +0000)]
IntelFrameworkPkg: fix build for AARCH64/ARM
Contrary to what the name suggests, some modules in this package are used
on other architecture. ARM is already listed in SUPPORTED_ARCHITECTURES
in the .dsc, but AARCH64 was never added - so do that.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Leif Lindholm [Thu, 1 Nov 2018 14:58:22 +0000 (14:58 +0000)]
IntelFrameworkModulePkg: fix build for AARCH64/ARM
Contrary to what the name suggests, some modules in this package are used
on other architecture. ARM is already listed in SUPPORTED_ARCHITECTURES
in the .dsc, but AARCH64 was never added.
Add that, and force inclusion of CompilerIntrinsicsLib and
BaseStackCheckLib for AARCH64/ARM to make the build successful.
Leif Lindholm [Thu, 1 Nov 2018 14:51:50 +0000 (14:51 +0000)]
AppPkg: fix webserver build for !Ia32/X64
The WebServer application is not meant to be Ia32/X64 specific, and would
build for other architectures, if it wasn't for the
#include <Register/Msr.h>
in WebServer.h. Move that statement to Mtrr.c instead, which is the only
consumer, and is already being filtered out for other architectures.
Fix issues that reported by Edk2 coding style check tool(ECC) that:
in Comment, <@param SystemTable> does NOT consistent with parameter
name MmSystemTable.
Uninitialized pointer variable may randomly point to a block of memory.
In This case, FreePool function will free a block of memory that is not
belongs to this function.
Mike Turner [Fri, 28 Dec 2018 08:00:02 +0000 (16:00 +0800)]
MdePkg/BaseLib: Add Base64Encode() and Base64Decode()
Introduce public functions Base64Encode and Base64Decode.
https://bugzilla.tianocore.org/show_bug.cgi?id=1370
v2:1.Remove some white space.
2.Add unit test with test vectors in RFC 4648.
https://github.com/shenglei10/edk2/tree/encode_test
https://github.com/shenglei10/edk2/tree/decode_test
v3:1.Align white space.
2.Update comments of Base64Encode and Base64Decode.
3.Change the use of macro RETURN_DEVICE_ERROR to
RETURN_INVALID_PARAMETER in string.c.
v4:Change parameters' names.
v5:1.Update usage of variables.
2.Remove debug message in Base64Decode().
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Liming Gao <liming.gao@intel.com>
Fan, ZhijuX [Fri, 1 Feb 2019 07:41:06 +0000 (15:41 +0800)]
BaseTools: PCD value incorrect in structure pcd sku case.
Defined 2 PCDs(Test4 & Test401) and 2 SKUs(DEFAULT & _),
then set "SKUID_Defines" to ALL, for FixedAtBuild
gEfiStructuredPcdPkgTokenSpaceGuid. Test401 in this case,
its value should get from "Default" SKU, not from "_" SKU,
but we does not set value in SKU "_" in dsc, so Test401
should only display the value get from dec.
Missing the map() function causes SKU specific items to
not be deleted
Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Feng, Bob C [Mon, 14 Jan 2019 08:41:22 +0000 (16:41 +0800)]
BaseTools: Eot tool Python3 adaption
v2:
The python files under CParser4 are generated by antlr4 and for
python3 usage. They have python3 specific syntax, for example
the data type declaration for the arguments of a function. That
is not compitable with python2. this patch is to remove these syntax.
Feng, Bob C [Fri, 4 Jan 2019 09:35:10 +0000 (17:35 +0800)]
BaseTools: ECC tool Python3 adaption
v2:
The python files under CParser4 are generated by antlr4 and for
python3 usage. They have python3 specific syntax, for example
the data type declaration for the arguments of a function. That
is not compitable with python2. this patch is to remove these syntax.
Zhijux Fan [Fri, 7 Dec 2018 04:34:44 +0000 (12:34 +0800)]
BaseTools: change the Division Operator
PEP 238 -- Changing the Division Operator
x/y to return a reasonable approximation of the mathematical result
of the division ("true division")
x//y to return the floor ("floor division")
Line 208 of BaseTools/Source/Python/Trim/Trim.py uses
'NewLines.append(os.linesep)' to insert a new line into
the list that will be written to the output file.
This causes the '\r\n' inserted with os.linesep to be
written as '\r\r\n', causing some assemblers to error.
projects / mirror_edk2.git / log