Ruiyu Ni [Wed, 6 May 2015 03:22:26 +0000 (03:22 +0000)]
Copy PCD from IntelFrameworkModulePkg to MdePkg and MdeModulePkg
to MdePkg: PcdHardwareErrorRecordLevel, PcdPlatformBootTimeout
to MdeModulePkg: PcdSetupConOutColumn, PcdSetupConOutRow, PcdSetupVideoHorizontalResolution, PcdSetupVideoVerticalResolution
Ard Biesheuvel [Tue, 5 May 2015 15:51:44 +0000 (15:51 +0000)]
EmbeddedPkg: do not ASSERT() on valid external input
Since ASSERT()s are enabled even on all ArmPlatformPkg RELEASE
builds, ASSERT()ing on a valid FDT header will crash the firmware
if the user selects an incorrect file. Since ASSERT() is meant to
catch internal inconsistencies in the firmware, its use here is
inappropriate.
Olivier Martin [Tue, 5 May 2015 15:47:07 +0000 (15:47 +0000)]
EmbeddedPkg/FdtPlatformDxe: Changed the driver from DXE to UEFI driver
The driver does not really require to be a DXE driver.
By moving it as a UEFI driver it also implies it is dispatcged after
the DXE drivers at boot time.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17307 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin [Tue, 5 May 2015 15:43:48 +0000 (15:43 +0000)]
ArmPlatformPkg: Move the FDT platform driver at the end of the driver list
The Fdt platform driver has been moved at the end of the list
of the DXE/UEFI drivers to ensure the device drivers have been
dispatched prior to load the FDT platform driver.
For instance, if we want to load FDT from TFTP we must have
the ethernet driver to be already loaded.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17305 6f19259b-4bc3-4df7-8a09-765794883524
Ronald Cron [Tue, 5 May 2015 15:24:17 +0000 (15:24 +0000)]
EmbeddedPkg/FdtPlatformDxe: 'setfdt' command, add deletion of the UEFI variable "Fdt"
Add deletion of the "Fdt" UEFI variable used to specify
a development FDT device path when the 'setfdt' command
is called with an empty string as file path.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <Ronald.Cron@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17300 6f19259b-4bc3-4df7-8a09-765794883524
Ronald Cron [Tue, 5 May 2015 15:23:02 +0000 (15:23 +0000)]
ArmPlatformPkg/FdtPlatformDxe: 'setfdt' command, add display of FDT device paths.
Add the display of the device paths that the FDT installation
process goes through when the 'setfdt' EFI Shell command is
called without any parameter.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <Ronald.Cron@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17299 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin [Tue, 5 May 2015 15:12:58 +0000 (15:12 +0000)]
EmbeddedPkg/FdtPlatformDxe: Run FDT installation process at TPL_APPLICATION level
The current mechanism relies on EndOfDxe event that runs at TPL_CALLBACK level.
It prevents some protocols to run as excepted because they require TPL_CALLBACK
(eg: TFTP transfer).
This change moves FDT installation in the driver entrypoint (that is called at
TPL_APPLICATION level).
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17298 6f19259b-4bc3-4df7-8a09-765794883524
Olivier Martin [Tue, 5 May 2015 14:56:51 +0000 (14:56 +0000)]
ArmPlatformPkg/Scripts/Makefile: Added support to automatically update the FIP
Some ARM development platforms use ARM Trusted Firmware to boot.
ARM Trusted Firmware encapsulates UEFI into the FIP (Firmware
Image Package) binary.
This change allows to update the FIP binary after building UEFI.
Example to build UEFI for FVP Base model:
$ make -f ArmPlatformPkg/Scripts/Makefile \
EDK2_DSC=ArmPlatformPkg/ArmVExpressPkg/ArmVExpress-FVP-AArch64.dsc \
EDK2_ARCH=AARCH64 EDK2_TOOLCHAIN=GCC49 \
FIP_BIN=~/arm-trusted-firmware/build/fvp/release/fip.bin
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Ronald Cron <Ronald.Cron@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17296 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Thu, 30 Apr 2015 07:25:07 +0000 (07:25 +0000)]
MdePkg/BaseLib: Preserve EBX register and fix stack offset to LinearAddress in AsmFlushCacheLine()
The value of EBX must be preserved to follow IA32 cdecl calling convention in the assembly
implementation of AsmFlushCacheLine(). The CPUID instruction modifies the EBX register.
The EBX register value is saved onto the stack before CPUID and restored from the stack
after CPUID.
The update to the inline assembly implementation of AsmFlushCacheLine() changed the location of the
LinearAddress parameter value on the stack. The hardcoded lookup using [esp + 4] is not correct.
Use the parameter name LinearAddress instead of the hard coded [esp + 4] stack location to prevent
this issue from occurring again if there are changes to the inline assembly in the future.
Ye Ting [Thu, 30 Apr 2015 02:57:10 +0000 (02:57 +0000)]
Add IPV6 support from UNDI
Add new information block ‘IPV6 support from UNDI’ in AIP protocol and provide sample implementation in UNDI driver.
Update PXE driver to get ‘Ipv6Available’ of PXE BC Mode data from UNDI driver, if unsupported then not to start PXE over IPv6 path.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17275 6f19259b-4bc3-4df7-8a09-765794883524
Fu Siyuan [Wed, 29 Apr 2015 05:47:03 +0000 (05:47 +0000)]
Remove duplicate DAD entry in IP6 driver to fix DAD fail issue.
The IP6 driver may create duplicate IP6_DAD_ENTRY in DupAddrDetectList in some situation like:
1. Address policy switch but not clear the delay node list, OR
2. Set manual address repeatedly before the previous DAD is finished.
The NS sent out by duplicate DAD entry will mix up with the loop back multicast packet, result in DAD fail.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Fu Siyuan <siyuan.fu@intel.com> Reviewed-by: Ye Ting <ting.ye@intel.com> Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17263 6f19259b-4bc3-4df7-8a09-765794883524
Ma, Maurice [Wed, 29 Apr 2015 03:50:20 +0000 (03:50 +0000)]
Add dual FSP binaries support.
There are two FSP images at different locations in a flash (one factory version is read only and other in updatable version)
TempRamInit, FspMemoryInit and TempRamExit are executed from factory version and FspSiliconInit/NotifyPhase will be executed from updatable version.
Ma, Maurice [Wed, 29 Apr 2015 03:10:24 +0000 (03:10 +0000)]
Add dual FSP binaries support.
There are two FSP images at different locations in a flash (one factory version is read only and other in updatable version)
TempRamInit, FspMemoryInit and TempRamExit are executed from factory version and FspSiliconInit/NotifyPhase will be executed from updatable version.
MdeModulePkg: fix some issues in ScsiDisk to co-work with UFS stack
The changes in ScsiDisk include:
1. Add UFS disk info support.
2. Remove the wrong block size calculation.
3. Get sense data for TEST_UNIT_READY cmd immediately rather than sending a REQUEST_SENSE cmd again.
It includes 4 drivers:
1. UfsPassThruDxe, which is a UEFI driver and consumes EFI_UFS_HOST_CONTROLLER_PROTOCOL and produces EFI_EXT_SCSI_PASS_THRU_PROTOCOL
2. UfsPciHcDxe, which is specific for pci-based UFS HC implementation and is a UEFI driver to produce EFI_UFS_HOST_CONTROLLER_PROTOCOL.
3. UfsBlockIoPei, which is a PEI driver and consumes EFI_UFS_HOST_CONTROLLER_PPI and produces EFI_PEI_VIRTUAL_BLOCK_IO_PPI.
4. UfsPciHcPei, which is specific for pci-based UFS HC implementation and is a PEI driver to produce EFI_UFS_HOST_CONTROLLER_PPI.
MdePkg: Add PI 1.4 Graphics HOB and PPI header files
The PeiGraphicsPpi is the main interface exposed by the Graphics PEIM to
be used by the other firmware modules.
When graphics capability is included in PEI, it produces a
EFI_PEI_GRAPHICS_INFO_HOB which provides information about the graphics
mode and the framebuffer.
Michael Kinney [Mon, 27 Apr 2015 19:54:52 +0000 (19:54 +0000)]
UefiCpuPkg/CpuExceptionHandlerLib: Support IA32 processors without DE or FXSAVE/FXRESTOR
Use CPUID Leaf 01 to detect support for debug extensions and FXSAVE/FXRESTOR instructions.
Do not enable those features in CR4 if they are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17221 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 27 Apr 2015 19:53:36 +0000 (19:53 +0000)]
SourceLevelDebugPkg/DebugAgent: Support IA32 processors without DE or FXSAVE/FXRESTOR
Use CPUID Leaf 01 to detect support for debug extensions and FXSAVE/FXRESTOR instructions.
Do not enable those features in CR4 if they are not supported.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17220 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 27 Apr 2015 19:48:00 +0000 (19:48 +0000)]
MdePkg/BaseXApicX2ApicLib: Support IA32 processors without MSR_IA32_APIC_BASE_ADDRESS
Use Family from CPUID 01 to detect support for the Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS).
If this MSR is not supported, then use Local APIC Base Address from the PCD PcdCpuLocalApicBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17217 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 27 Apr 2015 19:47:26 +0000 (19:47 +0000)]
MdePkg/BaseXApicLib: Support IA32 processors without MSR_IA32_APIC_BASE_ADDRESS
Use Family from CPUID 01 to detect support for the Local APIC Base Address MSR (MSR_IA32_APIC_BASE_ADDRESS).
If this MSR is not supported, then use Local APIC Base Address from the PCD PcdCpuLocalApicBaseAddress.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17216 6f19259b-4bc3-4df7-8a09-765794883524
Michael Kinney [Mon, 27 Apr 2015 19:44:40 +0000 (19:44 +0000)]
MdePkg/BaseSerialPortLib16550: Support UARTs with a register stride greater than 1 byte.
Add stride PCD to MdeModulePkg to support 16550 UARTs with a register stride that is not 1 byte.
The default value is 1 byte.
Quark SoC uses a stride of 4 bytes.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17215 6f19259b-4bc3-4df7-8a09-765794883524
Clear EFLAGS.IF before executing Stepping command and save original
value in DEBUG_AGENT_FLAG. It could avoid pending interrupt issued
during executing Stepping command. Restore EFLAGS.IF after Stepping
command execution finished.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@17204 6f19259b-4bc3-4df7-8a09-765794883524
ShellPkg: Refine the logic about allocating memory for variable name and data.
The run time service 'QueryVariableInfo' is not proper to be used to get the variable name size. This patch refine the logic about allocating memory for variable name and data.
-- Add BootLoaderTolumSize support
-- Extend FspApiCallingCheck with ApiParam for BootLoaderTolumSize
-- Rename all Bootloader to BootLoader as official name
-- Rename Ucode to Microcode
-- Remove FspSelfCheck API, because it is merged into SecPlatformInit
-- Add GetFspVpdDataPointer() in FspCommonLib.h
-- Document FspSecPlatformLib.h
-- Reorg FSP_PLAT_DATA data structure to let it match FSP spec.
-- Move helper function in FspSecCore to reduce platform enabling effort
-- Fix LibraryClasses declaration in DEC file.
-- Enhance PatchFv to check if it is valid FSP bin.
projects / mirror_edk2.git / log