Xie, Yuanhao [Wed, 1 Mar 2023 06:09:48 +0000 (14:09 +0800)]
UefiCpuPkg: Split the path in RelocateApLoop into two.
Add the union RELOCATE_AP_LOOP_ENTRY, split the path in RelocateApLoop
into two:
1. 64-bit AMD processors with SEV-ES
2. Intel processors (32-bit or 64-bit), 32-bit AMD processors, or
64-bit AMD processors without SEV-ES.
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Sean Rhodes <sean@starlabs.systems> Cc: James Lu <james.lu@intel.com> Cc: Gua Guo <gua.guo@intel.com> Signed-off-by: Yuanhao Xie <yuanhao.xie@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to check SmBase relocation supported or not.
If gSmmBaseHobGuid found, means SmBase info has been relocated
and recorded in the SmBase array. ASSERT it's not supported in OVMF.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Zeng Star <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch is to avoid configure SMBASE if SmBase relocation has been
done. If gSmmBaseHobGuid found, means SmBase info has been relocated
and recorded in the SmBase array. No need to do the relocation in
SmmCpuFeaturesInitializeProcessor().
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Zeng Star <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
Existing SMBASE Relocation is in the PiSmmCpuDxeSmm driver, which
will relocate the SMBASE of each processor by setting the SMBASE
field in the saved state map (at offset 7EF8h) to a new value.
The RSM instruction reloads the internal SMBASE register with the
value in SMBASE field when each time it exits SMM. All subsequent
SMI requests will use the new SMBASE to find the starting address
for the SMI handler (at SMBASE + 8000h).
Due to the default SMBASE for all x86 processors is 0x30000, the
APs' 1st SMI for rebase has to be executed one by one to avoid
the processors over-writing each other's SMM Save State Area (see
existing SmmRelocateBases() function), which means the next AP has
to wait for the previous AP to finish its 1st SMI, then it can call
into its 1st SMI for rebase via Smi Ipi command, thus leading the
existing SMBASE Relocation has to be running in series. Besides, it
needs very complex code to handle the AP exit semaphore
(mRebased[Index]), which will hook return address of SMM Save State
so that semaphore code can be executed immediately after AP exits
SMM for SMBASE relocation (see existing SemaphoreHook() function).
With SMM Base Hob support, PiSmmCpuDxeSmm does not need the RSM
instruction to do the SMBASE Relocation. SMBASE Register for each
processors have already been programmed and all SMBASE address have
recorded in SMM Base Hob. So the same default SMBASE Address
(0x30000) will not be used, thus the processors over-writing each
other's SMM Save State Area will not happen in PiSmmCpuDxeSmm driver.
This way makes the first SMI init can be executed in parallel and
save boot time on multi-core system. Besides, Semaphore Hook code
logic is also not required, which will greatly simplify the SMBASE
Relocation flow.
Mainly changes as below:
* Assume the biggest possibility of tile size is 8k.
* Combine 2 SMIs (gcSmmInitTemplate & gcSmiHandlerTemplate) into one
(gcSmiHandlerTemplate), the new SMI handler needs to run to 2 paths:
one to SmmCpuFeaturesInitializeProcessor(), the other to SMM Core
Entry Point.
* Issue SMI IPI (All Excluding Self SMM IPI + BSP SMM IPI) for first
SMI init before normal SMI sources happen.
* Call SmmCpuFeaturesInitializeProcessor() in parallel.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Zeng Star <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
The default SMBASE for the x86 processor is 0x30000. When
SMI happens, processor runs the SMI handler at SMBASE+0x8000.
Also, the SMM save state area is within SMBASE+0x10000.
One of the SMM initialization from processor perspective is to
relocate and program the new SMBASE (in TSEG range) for each
processor. When the SMBASE relocation happens in a PEI module,
the PEI module shall produce the SMM_BASE_HOB in HOB database
which tells the PiSmmCpuDxeSmm driver (runs at a later phase)
about the new SMBASE for each processor. PiSmmCpuDxeSmm driver
installs the SMI handler at the SMM_BASE_HOB.SmBase[Index]+0x8000
for processor Index. When the HOB doesn't exist, PiSmmCpuDxeSmm
driver shall relocate and program the new SMBASE itself.
This patch adds the SMM Base HOB for any PEI module to do
the SmBase relocation ahead of PiSmmCpuDxeSmm driver and
store the relocated SmBase address in array for each
processor.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Zeng Star <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@Intel.com>
Wu, Jiaxin [Thu, 16 Feb 2023 06:16:29 +0000 (14:16 +0800)]
UefiCpuPkg/PiSmmCpuDxeSmm: Replace mIsBsp by mBspApicId check
This patch is to replace mIsBsp by mBspApicId check.
mIsBsp becomes the local variable (IsBsp), then it can be
checked dynamically in the function. Instead, we define the
mBspApicId, which is to record the BSP ApicId used for
compare in SmmInitHandler. With this change, SmmInitHandler
can be run in parallel during SMM init.
Note:
This patch is the per-prepared work by refining the
SmmInitHandler, then, we can do the next step to
combine 2 SMIs (gcSmmInitTemplate & gcSmiHandlerTemplate)
into one (gcSmiHandlerTemplate), the new SMI handler
will call the SmmInitHandler in parallel to do the init.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Zeng Star <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
No need call InitializeMpSyncData during normal boot SMI init,
because mSmmMpSyncData is NULL at that time. mSmmMpSyncData is
allocated in InitializeMpServiceData, which is invoked after
normal boot SMI init (SmmRelocateBases).
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Zeng Star <star.zeng@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Ray Ni <ray.ni@Intel.com>
Nickle Wang [Wed, 1 Mar 2023 08:44:57 +0000 (16:44 +0800)]
RedfishPkg/RedfishDebugLib: provide Redfish debug
Introduce RedfishDebugLib to RedfishPkg. This library provides several
debugging functions for Redfish application. Redfish drivers rely on
Rest Ex protocol to communicate with BMC and the communication data
may be big and complicated. Use RedfishDebugLib in RedfishRestExDxe to
simplify debugging process.
Signed-off-by: Nickle Wang <nicklew@nvidia.com> Cc: Abner Chang <abner.chang@amd.com> Cc: Igor Kulchytskyy <igork@ami.com> Cc: Nick Ramirez <nramirez@nvidia.com> Reviewed-by: Abner Chang <abner.chang@amd.com>
Currently, stack HOB is not created for the stack memory. This causes
stack memory to be treated as free memory and any memory allocation which
happens at this address causes random memory corruption. Fix this by
creating the stack HOB which marks the memory as BS data.
Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Andrei Warkentin <andrei.warkentin@intel.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reported-by: Andrei Warkentin <andrei.warkentin@intel.com> Tested-by: Andrei Warkentin <andrei.warkentin@intel.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Since UefiPayloadPkg had supported multiple firmware volume,
remove the platform specific logic via protocol
Cc: Ray Ni <ray.ni@intel.com> Cc: Sean Rhodes <sean@starlabs.systems> Cc: Gua Guo <gua.guo@intel.com> Reviewed-by: James Lu <james.lu@intel.com> Reviewed-by: Guo Dong <guo.dong@intel.com> Signed-off-by: MarsX Lin <marsx.lin@intel.com>
Sunil V L [Wed, 22 Feb 2023 02:36:59 +0000 (10:36 +0800)]
OvmfPkg/RiscVVirt: Fix SCT memory allocation test case failure
Fix the UEFI memory range calculation by including the correct
stack memory range. Without this fix, SCT hangs in MemoryAllocation
test cases which call AllocateAddress().
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Andrei Warkentin <andrei.warkentin@intel.com> Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
Joey Vagedes [Thu, 16 Feb 2023 05:54:16 +0000 (05:54 +0000)]
BaseTools: Update WindowsVsToolChain plugin
This patch updates edk2-pytool-library dependency to v0.14.0, which has
an interface change to FindWithVsWhere. The BaseTools plugin uses this
function, so it is being updated to account for the interface change.
Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Yuwei Chen <yuwei.chen@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Signed-off-by: Joey Vagedes <joeyvagedes@microsoft.com> Acked-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
RiscVVirt is created to support EDK2 for RISC-V qemu
virt machine platform. Add maintainer entries.
Cc: Andrew Fish <afish@apple.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
RISC-V Qemu Virt platfform needs the PlatformBootManagerLib similar
to the one in ArmVirtPlatform. Add the library in OvmfPkg/RiscVVirt
leveraging the one from Arm.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
PlatformHasAcpiDtDxe is required by other architectures also.
Hence, it is moved to OvmfPkg. So, update the consumers of this
module with the new location.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Cc: Sami Mujawar <sami.mujawar@arm.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
RISC-V register names do not follow the EDK2 formatting.
So, add it to ignore list for now.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Acked-by: Ray Ni <ray.ni@intel.com>
This is copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Universal/CpuDxe
and added the RISCV_EFI_BOOT_PROTOCOL support.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Daniel Schaefer <git@danielschaefer.me> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com>
This DXE module initializes the timer interrupt handler
and installs the Arch Timer protocol.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Daniel Schaefer <git@danielschaefer.me> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Acked-by: Ray Ni <ray.ni@Intel.com>
This is mostly copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVTimerLib
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Daniel Schaefer <git@danielschaefer.me> Cc: Abner Chang <abner.chang@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Acked-by: Ray Ni <ray.ni@Intel.com>
Add Cpu Exception Handler library for RISC-V. This is copied
from edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVExceptionLib
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Daniel Schaefer <git@danielschaefer.me> Cc: Abner Chang <abner.chang@amd.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Acked-by: Ray Ni <ray.ni@Intel.com>
RISC-V UEFI based platforms need to support RISCV_EFI_BOOT_PROTOCOL.
Add this protocol GUID definition and the header file required.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Daniel Schaefer <git@danielschaefer.me> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Acked-by: Ray Ni <ray.ni@intel.com>
This library is required to make SBI ecalls from the S-mode EDK2.
This is mostly copied from
edk2-platforms/Silicon/RISC-V/ProcessorPkg/Library/RiscVEdk2SbiLib
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Few of the basic helper functions required for any
RISC-V CPU were added in edk2-platforms. To support
qemu virt, they need to be added in BaseLib.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Daniel Schaefer <git@danielschaefer.me> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Add register definitions and access routines for RISC-V. These
headers are leveraged from opensbi repo.
Cc: Daniel Schaefer <git@danielschaefer.me> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Acked-by: Abner Chang <abner.chang@amd.com> Reviewed-by: Andrei Warkentin <andrei.warkentin@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
lijun10x [Thu, 2 Feb 2023 06:20:57 +0000 (14:20 +0800)]
MdeModulePkg/Library: PcdAcpiS3Enable set FALSE cause Assert
Some platforms don't support S3 with PcdAcpiS3Enable set as False.
Debug mode bios will ASSERT at this time as Follows.
ASSERT_RETURN_ERROR (Status = Out of Resources)
DXE_ASSERT!: Edk2\MdePkg\Library\BaseS3PciSegmentLib\S3PciSegmentLib.c
(61): !(((INTN)(RETURN_STATUS)(Status)) < 0)
Steps to reproduce the issue:
1.Set PcdAcpiS3Enable to FALSE.
2.Build the bios in debug mode.
3.Power on and Check the serial log.
Note: Prerequisite is that S3PciSegmentLib is Called and
the caller's code is run.
Root Cause:
S3PciSegmentLib call S3BootScriptLib controlled by PcdAcpiS3Enable.
If PcdAcpiS3Enable set as false, S3BootScriptLib will return error
status(Out of Resources).
S3PciSegmentLib will ASSERT if S3BootScriptLib return error.
Solution:
Make S3BootScriptLib return success if PcdAcpiS3Enable was disabled,
which behave as a null S3BootScriptLib instance which just return success
for no action is required to do.
Signed-off-by: JunX1 Li <junx1.li@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Sunny Wang <sunny.wang@arm.com> Cc: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Cc: G Edhaya Chandran <edhaya.chandran@arm.com> Cc: Samer El-Haj-Mahmoud <samer.el-haj-mahmoud@arm.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Commit 21320ef66989 broke some tests in the AuthVar_Conf test
in edk2-test. There are 2 testcases that invoke SetVariable
with the following attribute value:
MdeModulePkg/EsrtFmpDxe: Support multiple devices with 0 HardwareInstance
Skip error check if HardwareInstance is 0 as this either means that
FmpVersion < 3 and not supported or,
"A zero means the FMP provider is not able to determine a
unique hardware instance number or a hardware instance number
is not needed." per UEFI specification.
As the FmpInstances are merged and HardwareInstance is not used
remove error check in this case.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Abner Chang [Thu, 12 Jan 2023 05:14:17 +0000 (21:14 -0800)]
MdeModulePkg/Pci: Display more information of PCIe devices
In V4: Update the copyright to 2023.
In V3: Add AMD copyright.
In V2: Remove the signed-off-by: Abner Chang
Display PCIe Vendor ID and Device ID in DEBUG message.
Signed-off-by: Jiangang He <jiangang.he@amd.com> Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Garrett Kirkendall <garrett.kirkendall@amd.com> Cc: Abner Chang <abner.chang@amd.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Dionna Glaze [Tue, 14 Feb 2023 23:07:19 +0000 (23:07 +0000)]
OvmfPkg/AmdSevDxe: Close mAcceptAllMemoryEvent
This event should only trigger once. It should be idempotent, but the
allocation of the memory map itself is observable and can cause
ExitBootServices to fail with a modified map key.
Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Min Xu <min.m.xu@intel.com> Cc: Michael Roth <michael.roth@amd.com> Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Min Xu <min.m.xu@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
[ardb: drop the EFI_MEMORY_CPU_CRYPTO flag - it isn't used anywhere else
in EDK2 or Linux so it doesn't actually do anything, and it is
unclear whether it is intended for use by the guest in the first
place] Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tianocore maintains container images in the tianocore/containers repo
and stores container images within the GitHub container registry.
https://github.com/tianocore/containers
This change adds a devcontainer.json file to the edk2 repo. This
file's metadata and settings to configurate a development container
for a given well-defined tool and runtime stack.
More information about the devcontainer.json file is available here:
https://containers.dev/implementors/json_reference/
This file is recognized by popular tools such as GitHub Codespaces
and VS Code. In VS Code in particular, it makes it much easier for
a user to be aware a dev container exists (via UI notifications)
and to load the container.
A minimal number of VS Code extensions are specified that are useful
for edk2 development or to assist in complying with CI checks in
place in edk2.
Cc: Andrew Fish <afish@apple.com> Cc: Chris Fernald <chris.fernald@outlook.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Oliver Steffen <osteffen@redhat.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
```
The option rebase_fallback is now deprecated and should not be
used anymore.
Mergify will always report errors in the future if a rebase merge
is impossible.
```
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Sean Brogan <sean.brogan@microsoft.com> Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Add RPMB(Replay Protected Memory Block) access commands,
result and DCB(Device Configuration Block) definition for
NVMe according to the NVMe spec 2.0.
Cc: Hao Wu <hao.a.wu@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Weipu Zhu <weipu.zhu@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com> Acked-by: Michael D Kinney <michael.d.kinney@intel.com>
Abner Chang [Thu, 9 Feb 2023 18:05:12 +0000 (02:05 +0800)]
RedfishPkg/RedfishRestExDxe: Two PCDs for controlling the requests
Since BIOS should work with different BMC implementation chunked requests
as well as Expect header should be optional.
- One PCD is used to enable/disable Expect header.
- Another PCD is used to enable/disable chunked requests.
Reviewed-by: Abner Chang <abner.chang@amd.com> Cc: Abner Chang <abner.chang@amd.com> Cc: Nickle Wang <nicklew@nvidia.com> Signed-off-by: Igor Kulchytskyy <igork@ami.com>
Girish Mahadevan [Mon, 30 Jan 2023 16:28:58 +0000 (16:28 +0000)]
StandaloneMmPkg/StandaloneMmMemLib: Change max address computation
Currently the standalonemmlibinternal assumes the max physical bits
to be 36 which is causing issues on v8 architectures.
Instead use the MAX_ALLOC_ADDRESS macro to determine the maximum
allowed address rather than recomputing it locally.
Thunk->Sleep is expecting nanoseconds, no need to multiply by 100.
Cc: Andrew Fish <afish@apple.com> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Deric Cole <deric.cole@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
EccBuild currently assumes all packages reside in WORKSPACE. However,
this is obviously not the case for many setups. Most notably, Ext4Pkg
is located in edk2-platforms/Features and thus cannot be in WORKSPACE
in any reasonable setup.
Use Edk2Path to locate the package in WORKSPACE and PACKAGES_PATH.
Cc: Sean Brogan <sean.brogan@microsoft.com> Cc: Michael Kubacki <mikuback@linux.microsoft.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Pedro Falcato <pedro.falcato@gmail.com> Signed-off-by: Marvin H?user <mhaeuser@posteo.de> Acked-by: Pedro Falcato <pedro.falcato@gmail.com> Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
The IO Remapping Table, Platform Design Document, Revision E.e,
Sept 2022 (https://developer.arm.com/documentation/den0049/ee)
added flags in SMMUv3 node for validity of ID mappings for MSIs
related to control interrupts.
Therefore, update the IORT header file to:
- increment IORT table revision to 6
- add support for DeviceId valid flag
Zhiguang Liu [Mon, 9 Jan 2023 03:34:22 +0000 (11:34 +0800)]
MdeModulePkg: Disambiguate the meaning of PcdDxeIplSwitchToLongMode
Literally, the meaning of PcdDxeIplSwitchToLongMode is clear, indicating
whether need switch to long mode when loading DxeCore.
However, the comments in dec are confusing for the case where PEI core and
DXE core are both in 64-bit. This patch makes it clear.
PcdDxeIplSwitchToLongMode is true only when PEI core is 32-bit, and switch
to long mode to load 64-bit DXE core. In other cases, this PCD is false.
This also aligns with current usage in OvmfPkg.
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Ray Ni <ray.ni@intel.com> Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Ray Ni <ray.ni@intel.com>
Nickle Wang [Wed, 1 Feb 2023 02:26:45 +0000 (10:26 +0800)]
RedfishPkg: fix multiple SMBIOS type 42 version issue
RedfishHostInterfaceDxe does not close protocol notify event in
event callback function. This could cause multiple version of
type 42 records issue if the protocol is installed more than once.
Close the event in callback function so we only create one type 42
record.
Signed-off-by: Nickle Wang <nicklew@nvidia.com> Cc: Abner Chang <abner.chang@amd.com> Cc: Igor Kulchytskyy <igork@ami.com> Cc: Nick Ramirez <nramirez@nvidia.com> Reviewed-by: Abner Chang <abner.chang@amd.com>
Sudeep Holla [Fri, 3 Feb 2023 14:23:38 +0000 (14:23 +0000)]
ArmPkg/ArmScmiDxe: Fix the calculation of RequiredArraySize
As per the SCMI specification, section CLOCK_DESCRIBE_RATES mentions
that the value of num_rates_flags[11:0] in the response must be 3 if
the return format is the triplet. Due to the buggy firmware, this was
not noticed for long time. The firmware is now fixed resulting in
ClockDescribeRates() to fail with "Buffer Too Small" error as the
RequiredArraySize gets miscalculated as 72 instead of 24.
Fix the issue by reusing the logic for both the return format which
must work if num_rates_flags has correct value as expected from the
specification.
Cc: Girish Pathak <girish.pathak@arm.com> Cc: Jeff Brasen <jbrasen@nvidia.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Tested-by: Pierre Gondois <pierre.gondois@arm.com> Reported-by: Sami Mujawar <sami.mujawar@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com> Tested-by: Sami Mujawar <sami.mujawar@arm.com>
Min M Xu [Fri, 3 Feb 2023 14:04:25 +0000 (22:04 +0800)]
OvmfPkg/IntelTdx: Update README
TDVF's README is updated based on the latest feature.
- RTMR based measurement is supported in OvmfPkgX64 (Config-A)
- Features of Config-B have all been implemented, such as removing
unnecessary attack surfaces.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Signed-off-by: Min Xu <min.m.xu@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
CcMeasurement protocol is installed when it is supported in a td-guest. If
the installation of the protocol failed, the guest shall go into
CpuDeadLoop. Because the measurement feature is crucial to a td-guest and
it shall stop running immediately at this situation.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Change the default value of PcdRequireSelfSignedPk to FALSE in
accordance with UEFI spec, which states that PK need not be
self-signed when enrolling in setup mode.
Note that this relaxes the legacy behavior, which required the PK to
be self-signed in this case.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Signed-off-by: Jan Bobek <jbobek@nvidia.com> Reviewed-by: Sean Brogan <sean.brogan@microsoft.com> Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Per UEFI spec, enrolling a new PK in setup mode should not require a
self-signature. Introduce a feature PCD called PcdRequireSelfSignedPk
to control this requirement. Default to TRUE in order to preserve the
legacy behavior.
Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Min Xu <min.m.xu@intel.com> Co-authored-by: Matthew Carlson <macarl@microsoft.com> Signed-off-by: Jan Bobek <jbobek@nvidia.com> Reviewed-by: Sean Brogan <sean.brogan@microsoft.com> Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Ard Biesheuvel [Fri, 3 Feb 2023 11:02:57 +0000 (12:02 +0100)]
EmbeddedPkg/PrePiLib: Drop unused PCD PcdPrePiCpuIoSize
The code never references the PCD so the INF should not reference it
either. The last reference was moved to PrePiHobLib in commit 05e48e00834b32e4bd2 (dated 2011!) and dropped from there as well in
commit 97106391955337155e7.
Cc: Leif Lindholm <quic_llindhol@quicinc.com> Cc: Abner Chang <abner.chang@amd.com> Cc: Daniel Schaefer <git@danielschaefer.me> Reported-by: Sunil V L <sunilvl@ventanamicro.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
This patch enables Tdx measurement in OvmfPkgX64 with below changes:
1) CC_MEASUREMENT_ENABLE is introduced in OvmfPkgX64.dsc. This flag
indicates if Intel TDX measurement is enabled in OvmfPkgX64. Its
default value is FALSE.
2) Include TdTcg2Dxe in OvmfPkgX64 so that CC_MEASUREMENT_PROTOCOL
is installed in a Td-guest. TdTcg2Dxe is controlled by
TDX_MEASUREMENT_ENABLE because it is only valid when Intel TDX
measurement is enabled.
3) OvmfTpmLibs.dsc.inc and OvmfTpmSecurityStub.dsc.inc are updated
because DxeTpm2MeasureBootLib.inf and DxeTpmMeasurementLib.inf
should be included to support CC_MEASUREMENT_PROTOCOL.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
TdHob and Configuration FV (Cfv) are external inputs from VMM. From the
security perspective, they should be measured before they're consumed.
This patch measures TdHob and Cfv and stores the measurement values in
WorkArea.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
TdxHelperLib provides below helper functions for a td-guest.
- TdxHelperProcessTdHob
- TdxHelperMeasureTdHob
- TdxHelperMeasureCfvImage
- TdxHelperBuildGuidHobForTdxMeasurement
PeiTdxHelperLib is the PEI instance of TdxHelperLib. It implements 1
function for tdx in PEI phase. Other functions are not supported in
PEI phase.
- TdxHelperBuildGuidHobForTdxMeasurement builds GuidHob for tdx
measurement in PEI phase.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
TdHob and Configuration FV (Cfv) are external inputs from VMM. From the
security perspective, they should be measured before they're consumed.
This patch measures TdHob and Cfv and stores the measurement values in
WorkArea.
After TdHob and Configuration FV (Cfv) are measured in SecMain, the
same measurements in PeilessStartupLib are deleted.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
ProcessHobList once was implemented in PlatformInitLib and it walks thru
TdHob list and accept un-accepted memories.
This patch moves the codes to SecTdxHelperLib and rename ProcessHobList
as TdxHelperProcessTdHob
After TdxHelperProcessTdHob is introduced, below changes are applied:
- Call TdxHelperProcessTdHob instead of ProcessHobList in SecMain.c
(in both OvmfPkgX64/Sec and IntelTdx/Sec).
- Delete the duplicated codes in PlatformInitLib
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
MeasureFvImage once was implemented in PeilessStartupLib and it does
measurement and logging for Configuration FV (Cfv) image in one go,
using TpmMeasureAndLogData(). But it doesn't work in SEC.
This patch splits MeasureFvImage into 2 functions and implement them in
SecTdxHelperLib.
- TdxHelperMeasureCfvImage
- TdxHelperBuildGuidHobForTdxMeasurement
TdxHelperMeasureCfvImage measures the Cfv image and stores the hash value
in WorkArea. TdxHelperBuildGuidHobForTdxMeasurement builds GuidHob for the
measurement based on the hash value in WorkArea.
After these 2 functions are introduced, PeilessStartupLib should also be
updated:
- Call these 2 functions instead of the MeasureFvImage
- Delete the duplicated codes in PeilessStartupLib
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
MeasureHobList once was implemented in PeilessStartupLib and it does
measurement and logging for TdHob in one go, using TpmMeasureAndLogData().
But it doesn't work in SEC.
This patch splits MeasureHobList into 2 functions and implement them in
SecTdxHelperLib.
- TdxHelperMeasureTdHob
- TdxHelperBuildGuidHobForTdxMeasurement
TdxHelperMeasureTdHob measures the TdHob and stores the hash value in
WorkArea. TdxHelperBuildGuidHobForTdxMeasurement builds GuidHob for the
measurement based on the hash value in WorkArea.
After these 2 functions are introduced, PeilessStartupLib should also be
updated:
- Call these 2 functions instead of the MeasureHobList
- Delete the duplicated codes in PeilessStartupLib
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
FV_HANDOFF_TABLE_POINTERS2 once was defined in IntelTdx.c. Its structure
is same as PLATFORM_FIRMWARE_BLOB2_STRUCT which is defined in
Library/TcgEventLogRecordLib.h. So this patch reuse the define of
PLATFORM_FIRMWARE_BLOB2_STRUCT as FV_HANDOFF_TABLE_POINTERS2. Furthermore
FV_HANDOFF_TABLE_POINTERS2 is renamed as CFV_HANDOFF_TABLE_POINTERS2
so that the name is more meaningful.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
TdxHelperLib provides below helper functions for a td-guest.
- TdxHelperProcessTdHob
- TdxHelperMeasureTdHob
- TdxHelperMeasureCfvImage
- TdxHelperBuildGuidHobForTdxMeasurement
SecTdxHelperLib is the SEC instance of TdxHelperLib. It implements 4
functions for tdx in SEC phase:
- TdxHelperProcessTdHob consumes TdHob to accept un-accepted memories.
Before the TdHob is consumed, it is first validated.
- TdxHelperMeasureTdHob measure/extend TdHob and store the measurement
value in workarea.
- TdxHelperMeasureCfvImage measure/extend the Configuration FV image and
store the measurement value in workarea.
- TdxHelperBuildGuidHobForTdxMeasurement builds GuidHob for tdx
measurement.
This patch implements the stubs of the functions. The actual
implementations are in the following patches. Because they are moved from
other files.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
From the perspective of security any external input should be measured
and extended to some registers (TPM PCRs or TDX RTMR registers).
There are below 2 external input in a Td guest:
- TdHob
- Configuration FV (CFV)
TdHob contains the resource information passed from VMM, such as
unaccepted memory region. CFV contains the configurations, such as
secure boot variables.
TdHob and CFV should be measured and extended to RTMRs before they're
consumed. TdHob is consumed in the very early stage of boot process.
At that moment the memory service is not ready. Cfv is consumed in
PlatformPei to initialize the EmuVariableNvStore. To make the
implementation simple and clean, these 2 external input are measured
and extended to RTMRs in SEC phase. That is to say the tdx measurement
is only supported in SEC phase.
After the measurement the hash values are stored in WorkArea. Then after
the Hob service is available, these 2 measurement values are retrieved
and GuidHobs for these 2 tdx measurements are generated.
This patch defines the structure of TDX_MEASUREMENTS_DATA in
SEC_TDX_WORK_AREA to store above 2 tdx measurements. It can be extended
to store more tdx measurements if needed in the future.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Min Xu <min.m.xu@intel.com>
QEMU provides the following three files for guest to install the ACPI
tables:
- etc/acpi/rsdp
- etc/acpi/tables
- etc/table-loader
"etc/acpi/rsdp" and "etc/acpi/tables" are similar, they are only kept
separate because they have different allocation requirements in SeaBIOS.
Both of these fw_cfg files contain preformatted ACPI payload.
"etc/acpi/rsdp" contains only the RSDP table, while "etc/acpi/tables"
contains all other tables, concatenated. To be noted, the tables in these
two files have been filled in by qemu, but two kinds of fields are
incomplete: pointers to other tables and checksums (which depend on the
pointers).
"/etc/table-loader" is a linker/loader which provides the commands to
"patch" the tables in "etc/acpi/tables" and then install them. "Patch"
means to fill the pointers and compute the checksum.
From the security perspective these 3 files are the raw data downloaded
from qemu. They should be measured and extended before they're consumed.
Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Michael Roth <michael.roth@amd.com> Signed-off-by: Min Xu <min.m.xu@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
In function InitPaging, NumberOfPml5Entries is calculated by below code
NumberOfPml5Entries = (UINTN)LShiftU64 (1, SizeOfMemorySpace - 48);
If the SizeOfMemorySpace is larger than 48, NumberOfPml5Entries will be
larger than 1. However, this doesn't make sense if the hardware doesn't
support 5 level page table.
Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com> Reviewed-by: Wu, Jiaxin <jiaxin.wu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Eric Dong <eric.dong@intel.com> Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Rebecca Cran [Fri, 23 Dec 2022 23:48:12 +0000 (07:48 +0800)]
MdePkg: Label CreateEvent NotifyFunction and NotifyContext optional
According to the UEFI 2.10 Specification, the EFI_BOOT_SERVICES_TABLE
CreateEvent function has the following signature:
typedef
EFI_STATUS
(EFIAPI *EFI_CREATE_EVENT) (
IN UINT32 Type,
IN EFI_TPL NotifyTpl,
IN EFI_EVENT_NOTIFY NotifyFunction, OPTIONAL
IN VOID *NotifyContext, OPTIONAL
OUT EFI_EVENT *Event
);
Fix the prototype in UefiSpec.h to match, by labeling the NotifyFunction
and NotifyContext parameters as OPTIONAL.
The code can reach line 69 only through the else path above at line 57.
The else path already has the same NULL check at line 59 and hence the
duplicate code lines are totally redundant which can be deleted.
Jeshua Smith [Thu, 3 Nov 2022 18:14:26 +0000 (18:14 +0000)]
ShellPkg/AcpiView: ERST Parser
Add a new parser for the Error Record Serialization Table.
The ERST table describes how an OS can save and retrieve
hardware error information to and from a persistent store.
Signed-off-by: Jeshua Smith <jeshuas@nvidia.com> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Currently DiscoverScsiDevice() returns a boolean which cannot
distinguish a "not found" situation from a real problem like
memory allocation failures.
This patch changes the return value to an EFI_STATUS so that when
memory allocation fails, it will return EFI_OUT_OF_RESOURCES.
Without this change, any FALSE returned by DiscoverScsiDevice()
will result in EFI_OUT_OF_RESOURCES being returned by
ScsiScanCreateDevice(), which will cause a while loop in
SCSIBusDriverBindingStart() to abort before other possible Puns in
the SCSI channel are scanned, which means good devices may not have
a chance to be discovered. If this good device is the boot device,
boot will fail.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Sivaparvathi chellaiah <sivaparvathic@ami.com> Signed-off-by: Yuan Yu <yuanyu@google.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Chao Li [Tue, 31 Jan 2023 10:27:40 +0000 (18:27 +0800)]
MdePkg: Fix UINT64 and INT64 word length for LoongArch64
The UINT64 and INT64 should be defined as unsigned long long and long long
in the linux64 bit environment, but now defined as unsigned long and long,
so fix it.
Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Chao Li <lichao@loongson.cn> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
In order to remove RTC_INDEX/RTC_TARGET from
the UplBuild macro list,change the RTC_INDEX
/RTC_TARGET type from PcdsFixedAtBuild to PcdsDynamicEx
Reviewed-by: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: James Lu <james.lu@intel.com> Reviewed-by: Gua Guo <gua.guo@intel.com> Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
Chao Li [Tue, 17 Jan 2023 08:05:52 +0000 (16:05 +0800)]
MdePkg: Add ACPI 6.5 header
Create Acpi65.h, which is copied from Acpi64.h, and make the following
changes:
1. Replace all occurences of "6.4/6_4" with "6.5/6_5".
2. Incremented FADT minor revision.
3. Make Acpi65.h the latest ACPI definitions that Acpi.h contains.
Rebecca Cran [Fri, 27 Jan 2023 16:42:50 +0000 (09:42 -0700)]
ArmPkg: Remove RealView Debugger support
The RealView Debugger is related to RVCT, which is no longer supported.
Given that, remove RvdPeCoffExtraActionLib and code from
RvdPeCoffExtraActionLib which prints lines for use with the RealView
Debugger.
Rebecca Cran [Fri, 27 Jan 2023 16:42:49 +0000 (09:42 -0700)]
BaseTools: Remove CYGWIN_NT-5.1-i686 ref from Scripts/PatchCheck.py
With the removal of RVCT support and the related Bin/CYGWIN_NT-5.1-i686
and Darwin-i386 directories, remove a leftover reference to
CYGWIN_NT-5.1-i686 from Scripts/PatchCheck.py.
MdeModulePkg: Correct memory type in PrePiDxeCis.h
The enumeration in MdePkg/Include/Pi/PiDxeCis.h has a duplicated entry,
so the 8th position in the list doesn't count as index 7. The value
EfiGcdMemoryTypeUnaccepted will have when added before
EfiGcdMemoryTypeMaximum will be 6.
Cc: Min M Xu <min.m.xu@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Signed-off-by: Dionna Glaze <dionnaglaze@google.com> Reviewed-by: Min Xu <min.m.xu@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
commit 17bd834eb5fd ("BaseTools: Factorize GCC flags")
makes GCC48_ALL_CC_FLAGS inherit from GCC_ALL_CC_FLAGS.
GCC_ALL_CC_FLAGS contains the '-Os' flag.
The latest flag in a command line overrides the previous
optimization option. This allows more specific build
configuration to override the inherited '-Os' flag.
If a build configuration includes GCC48_ALL_CC_FLAGS,
hard-coded '-Os' options are not necessary anymore.
Remove them.
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
projects / mirror_edk2.git / log