OvmfPkg/PlatformBootManagerLib: Remove dependency on Mps.h

Mps.h is included in BdsPlatform.h but not actually used.
So remove it.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdeModulePkg/ResetUtilityLib: Add a new API ResetSystemWithSubtype

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1458

Implement the new API ResetSystemWithSubtype. Depend on Uefi Spec
2.8 chapter 8.5.1, the ResetData is valid while the ResetStatus
is EFI_SUCCESS regardless of the ResetType. Also change the function
ResetPlatofrmSpecificGuid to directly call ResetSystemWithSubtype
to reduce the duplicated code.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/ResetUtilityLib: Add a new API ResetSystemWithSubtype

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1458

Add a new API ResetSystemWithSubtype's prototype declaration in
header file. Also add the required data type header file.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

ArmVirtPkg/ArmVirtPsciResetSystemLib: Add a new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

ArmPkg/ArmSmcPsciResetSystemLib: Add a new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

Vlv2TbltdevicePkg/ResetSystemLib: Add new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>

QuarkSocPkg/ResetSystemLib: Add new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

PcAtChipsetPkg/ResetSystemLib: Add new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>

OvmfPkg/ResetSystemLib: Add new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

Nt32Pkg/ResetSystemLib: Add new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

CorebootPayloadPkg/ResetSystemLib: Add new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

BeagleBoardPkg/ResetSystemLib: Add new API ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.

Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>

MdeModulePkg/NvmExpressHci.c: Change comments

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not. So change the comments of NvmeShutdownAllControllers.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/PeiMain: Change comments of PeiResetSystem2

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/ResetSystemPei: Change comments of ResetSystem2

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/ResetSystemRuntimeDxe: Change comments

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not. So change the comments of RuntimeServiceResetSystem.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/PeiResetSystemlib.c: Change comments of ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/RuntimeResetSystemLib.c: Change comments

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not. So change the comments of ResetSystem.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/BaseResetSystemLibNull.c: Change comments of ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/DxeResetSystemLib.c: Change comments of ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/ResetSystemLib.h: Change comments of ResetSystem

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

SecurityPkg/Tcg2Dxe: Change comments of ShutdownTpmOnReset

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>

MdePkg/PeiServicesLib.c: Change comments of PeiServicesResetSystem2

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdePkg/PeiServicesLib.h: Change comments of PeiServicesResetSystem2

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdePkg/PiPeiCis.h: Change comments of EFI_PEI_RESET2_SYSTEM

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdePkg/UefiSpec.h: Change comments of EFI_RESET_SYSTEM

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460

Refer to Uefi spec 2.8, the ResetData is valid while ResetStatus
is EFI_SUCCESS regardless of the ResetType is EfiResetPlatformSpecific
or not.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

BaseTools/tools_def.template: Remove tools chain with ASL tool

Microsoft ASL is not verified now.
So remove tool chain with ASL tool. They are: VS2008xASL,
VS2008x86xASL, VS2010xASL, VS2010x86xASL, VS2012xASL, VS2012x86xASL,
VS2013xASL, VS2013x86xASL, VS2015xASL, VS2015x86xASL and CYGGCCxASL.
https://bugzilla.tianocore.org/show_bug.cgi?id=1667

v2:Remove definitions of WIN_ASL_BIN, MS_ASL_OUTFLAGS and MS_ASL_FLAGS.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdeModulePkg/HiiDB: Minimize memory allocation times after ReadyToBoot

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1597

Currently RTData are allocated at/after ReadyToBoot to store the
contents in HiiDatabase and the HII configurations for OS runtime
utilization.
Some platforms may meet S4 resume issue since the allocation after
ReadyToBoot cause memory map change.
Now this patch is to do some overallocation to minimize the number
of memory allocations after ReadyToBoot and also add warning
message when do allocation after ReadyToBoot.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>

MdeModulePkg/FileExplorer: Set Handle to NULL after uninstall protocol

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1728

Currently Emulator meets ASSERT when enter setup->Continue->enter setup.
When re-enter setup, the FeDriverHandle in FileExplorerLib Constructor
is not NULL which cause InstallMultipleProtocolInterfaces failure,
then ASSERT. So here set FeDriverHandle to NULL after uninstalling
protocols on it in the Destructor function to avoid this issue.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>

MdeModulePkg/BMMUiLib: Set Handle to NULL after uninstall protocol

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1728

Currently Emulator meets ASSERT when enter setup->Continue->enter setup.
When re-enter setup, the BmmDriverHandle in BMMUiLib Constructor
is not NULL which cause InstallMultipleProtocolInterfaces failure,
then ASSERT. So here set BmmDriverHandle to NULL after uninstalling
protocols on it in Destructor function to avoid this issue.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>

BaseTools: Support customized compiling command

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1737
User may add other commands before CC command from build_rule.txt
for specific purpose. It worked fine before commit 05217d210e.

This patch is going to fix the bug in commit 05217d210e to
support customized CC command.

Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdeModulePkg/DxeCore: Please static checker for false report

After commit 57df17fe26, some static check reports suspicious NULL pointer
deference at line:

  Entry->MachineType = Entry->Emulator->MachineType;
                       ^^^^^^^^^^^^^^^

within function PeCoffEmuProtocolNotify().

However, 'Entry->Emulator' is guaranteed to have a non-NULL value when
previous call to the CoreHandleProtocol() returns EFI_SUCCESS.

This commit will re-write the return status check for CoreHandleProtocol()
to add explicit NULL pointer check for protocol instance pointer.

Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

EmbeddedPkg: Allow DXE_DRIVER to depend on NvVarStoreFormattedLib

Some modules (such as FaultTolerantWriteDxe) use the FlashNvStorage
PCDs (PcdFlashNvStorageFtw*). In case the flash contents are not
mapped in memory, the module loading order of the FVB driver
may become important.

To handle above, this patch allows to hook the dependency of
desired DXE_DRIVER type module in the .DSC file via
NvVarStoreFormattedLib NULL resolution.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

OvmfPkg/Sec: fix out-of-bounds reads

RH covscan justifiedly reports that accessing "EFI_FFS_FILE_HEADER.Size"
and "EFI_COMMON_SECTION_HEADER.Size", which both are of type UINT8[3],
through (UINT32*), is undefined behavior:

> Error: OVERRUN (CWE-119):
> edk2-89910a39dcfd/OvmfPkg/Sec/SecMain.c:283: overrun-local: Overrunning
> array of 3 bytes at byte offset 3 by dereferencing pointer
> "(UINT32 *)File->Size".
> #  281|
> #  282|       File = (EFI_FFS_FILE_HEADER*)(UINTN) CurrentAddress;
> #  283|->     Size = *(UINT32*) File->Size & 0xffffff;
> #  284|       if (Size < (sizeof (*File) + sizeof (EFI_COMMON_SECTION_HEADER))) {
> #  285|         return EFI_VOLUME_CORRUPTED;
>
> Error: OVERRUN (CWE-119):
> edk2-89910a39dcfd/OvmfPkg/Sec/SecMain.c:614: overrun-local: Overrunning
> array of 3 bytes at byte offset 3 by dereferencing pointer
> "(UINT32 *)File->Size".
> #  612|
> #  613|       File = (EFI_FFS_FILE_HEADER*)(UINTN) CurrentAddress;
> #  614|->     Size = *(UINT32*) File->Size & 0xffffff;
> #  615|       if (Size < sizeof (*File)) {
> #  616|         return EFI_NOT_FOUND;
>
> Error: OVERRUN (CWE-119):
> edk2-89910a39dcfd/OvmfPkg/Sec/SecMain.c:639: overrun-local: Overrunning
> array of 3 bytes at byte offset 3 by dereferencing pointer
> "(UINT32 *)Section->Size".
> #  637|         Section = (EFI_COMMON_SECTION_HEADER*)(UINTN) CurrentAddress;
> #  638|
> #  639|->       Size = *(UINT32*) Section->Size & 0xffffff;
> #  640|         if (Size < sizeof (*Section)) {
> #  641|           return EFI_NOT_FOUND;

Fix these by invoking the FFS_FILE_SIZE() and SECTION_SIZE() macros, which
by now have been fixed too.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-1008.txt
Issue: scan-1009.txt
Issue: scan-1010.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

MdePkg/PiFirmwareFile: fix undefined behavior in FFS_FILE_SIZE

Accessing "EFI_FFS_FILE_HEADER.Size", which is of type UINT8[3], through a
(UINT32*), is undefined behavior. Fix it by accessing the array elements
individually.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

BaseTools/PiFirmwareFile: fix undefined behavior in SECTION_SIZE

Sync SECTION_SIZE() from MdePkg to BaseTools, from an earlier patch in
this series.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

MdePkg/PiFirmwareFile: fix undefined behavior in SECTION_SIZE

RH covscan justifiedly reports that accessing
"EFI_COMMON_SECTION_HEADER.Size", which is of type UINT8[3], through a
(UINT32*), is undefined behavior:

> Error: OVERRUN (CWE-119):
> edk2-89910a39dcfd/OvmfPkg/Sec/SecMain.c:178: overrun-local: Overrunning
> array of 3 bytes at byte offset 3 by dereferencing pointer
> "(UINT32 *)((EFI_COMMON_SECTION_HEADER *)(UINTN)Section)->Size".
> #  176|       Section = (EFI_COMMON_SECTION_HEADER*)(UINTN) CurrentAddress;
> #  177|
> #  178|->     Size = SECTION_SIZE (Section);
> #  179|       if (Size < sizeof (*Section)) {
> #  180|         return EFI_VOLUME_CORRUPTED;

Fix this by accessing the array elements individually.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-1007.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

MdePkg/PiFirmwareFile: express IS_SECTION2 in terms of SECTION_SIZE

The IS_SECTION2() function-like macro duplicates the SECTION_SIZE()
calculation, just to compare the computed size against 0xFFFFFF. Invoke
SECTION_SIZE() instead; only preserve the comparison.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

CryptoPkg: add issetugid declaration to fix openssl build on FreeBSD

When building OpenSSL, the OpenBSD/FreeBSD/DFBSD code in crypto/uid.c
calls issetugid(). Add the declaration of this function to
CrtLibSupport.h to avoid the need to patch the openssl code on these
platforms.

Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>

MdeModulePkg/AhciPei: Add PEI BlockIO support

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1483

This commit will add the PEI BlockIO (2) PPIs support for AHCI mode ATA
devices.

More specifically, the driver will consume the ATA AHCI host controller
PPI for ATA controllers working under AHCI code within the system. And
then produces the below additional PPIs for each controller:

EFI PEI Recovery Block IO PPI
EFI PEI Recovery Block IO2 PPI

Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>

MdeModulePkg/AhciPei: Limit max transfer blocknum for 48-bit address

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1483

Due to the limited resource on the VTd DMA buffer size in the PEI phase,
the driver will limit the maximum transfer block number for 48-bit
addressing.

According to PCDs:
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSize|0x00400000
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSizeS3|0x00200000

The default buffer size allocated for IOMMU mapping is:
* 4M bytes for non-S3 cases;
* 2M bytes for S3

For ATA devices in 48-bit address mode, the maximum block number is
currently set to 0xFFFF. For a device with block size equal to 512 bytes,
the maximum buffer allowed for mapping within AhciPei driver will be close
to 32M bytes. Thus, this commit will limit the 48-bit mode maximum block
number to 0x800, which means 1M-byte maximum buffer for mapping when the
block size of a device is 512 bytes. By doing so, potential failure on
calls to the IOMMU 'Map' service can be avoided.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>

BaseTools: Remove ICC tool chain in tools_def.template

There is no Intel compiler test. Suggest to remove ICC tool chain from
tools_def.template.
https://bugzilla.tianocore.org/show_bug.cgi?id=1666

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 323b5b06c593ba6e438847dec7d4acec7f9df970)

MdePkg/BaseLib: Remove support of INTEL tool chain

As Intel tool chain will be removed, support of INTEL tool chain
should be removed first.
https://bugzilla.tianocore.org/show_bug.cgi?id=1666

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit dd611bfeaac249cebb6c12ffdcbbf510f8ed1980)

MdePkg/BaseIoLibIntrinsic: Remove IoLibIcc.c

As ICC tool chain will be removed, IoLibIcc.c should
also be removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1666

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 9b5be294b93f7ff7fe1bcafdc3c57016f58ee4e8)

ShellBinPkg: Remove ShellBinPkg

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1675

Remove ShellBinPkg from edk2.
If developers work on current edk2 master and still want to use Shell
binary after this removal, they can get it from source code in the Assets
part of edk2-stable201903 tag release page.
And from next release (edk2-stable201905 tag), we will publish all Shell
binaries to the according Assets part directly.
link: https://github.com/tianocore/edk2/releases
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
(cherry picked from commit 62d8b6004616a6d9b06afa83974be30eb951c679)

MdeModulePkg/HiiDatabaseDxe: Release lock on all error return path

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1652

Commit ffe5f7a6b4e9
"MdeModulePkg/HiiDatabase: Fix potential integer overflow "
added some new error paths, but it missed releasing the
mHiiDatabaseLock lock on those paths.
This patch releases mHiiDatabaseLock on those paths.

Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
(cherry picked from commit 927c516f9557f2f36319fe5d2508af29e3375fb8)

MdeModulePkg/DxeCapsuleLibFmp: clone ESRT for runtime access

The DxeCapsuleLibFmp code accesses the ESRT table to decide whether
a certain capsule is an FMP capsule. Since the UEFI spec mandates
that the ESRT resides in EfiBootServicesData memory, this results
in problems at OS runtime, since the firmware implementation itself
cannot access memory that has not been virtually remapped.

So let's take a private copy of the ESRT at ReadyToBoot, and store
it in EfiRuntimeServicesData memory. The ESRT's size is order 10s
of bytes so the memory footprint is going to be negligigble.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>

Change package maintainer and reviewer of CryptoPkg.

Removed Gang Wei from reviewer as he already left.
Updated Wang Jian to Maintainer of CryptoPkg and Ye Ting to reviewer of CryptoPkg.

Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ting Ye <ting.ye@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>

IntelFsp2WrapperPkg/FspsWrapperPeim: Fix coding style.

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1730

Internal code quality check failed after this commit:
68d47eea422d64eeb9872b927620f579f4ccfc0f, fixed those
coding style issues.

Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>

BaseTools: Hash false success.. minor change in hash invalidation

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1692

Change part of the hash error handling to invalidate hashes in the
cache destination not the cache source.

Signed-off-by: Christian Rodriguez <christian.rodriguez@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>

BaseTools:fixed the incorrect autogen makefile which cause build failure.

BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1729

On some build environment, build fails but on the other build machines,
build success. This is the regression issue introduced by commit
 05217d210e8da37b47d0be58ec363f7af2fa1c18

As Dict is unordered, an error occurs when extract the index of the Dict
in the order of the keys after the creation of a new item.
Keys are indexed inconsistently before and after adding a new item.
The logic of the program is to store the key's corresponding index as
reference data in the MakeFile and use it as part of the macro.
The data model is: $(LIST_%d) % Dict.keys().index(Key)
So for now, use OrdereDict instead of Dict.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>

BaseTools: Enhance Bin Cache database to support save the cache

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1726

V2: Added the platform name to the path
Add more level sub-directories in the database to support save
the cache for multiple platforms with multiple tool-chains and
targets, just like edk2 Build output.

Signed-off-by: Christian Rodriguez <christian.rodriguez@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>

BaseTools: Sometime write file not immediate to disk

BZ: https://bugzilla.tianocore.org/process_bug.cgi

On Windows OS, sometime the generated file is not immediate saved to disk.
When run nmake, prompt AutoGen.h not found, and stop build.
Below blog shows Write-Replace to fix it. This patch uses this way to write
temp file, then rename the temp file to the real file.
https://blog.gocept.com/2013/07/15/reliable-file-updates-with-python/

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>

MdePkg/UefiDebugLibStdErr: Make it runtime safe

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1416

After ExitBootServices, some pointer would be invalid such as
the Protocol pointer and gST. The function depend on those should
be prevent. So disable the related function while after
ExitBootServices.
Change the gST to a internal one, because there will be a cycle
consume between UefiBootServicesTableLib and DebugLib due to the
library constructors.
Also remove the SMM support for this instance.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdePkg/UefidebugLibConOut: Make it runtime safe

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1416

After ExitBootServices, some pointer would be invalid such as
the Protocol pointer and gST. The function depend on those should
be prevent. So disable the related function while after
ExitBootServices.
Change the gST to a internal one, because there will be a cycle
consume between UefiBootServicesTableLib and DebugLib due to the
library constructors.
Also remove the SMM support for this instance.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdePkg/UefiDebugLibDebugPortProtocol: Make it runtime safe

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1416

After ExitBootServices, some pointer would be invalid such as
the Protocol pointer and gBS. The function depend on those should
be prevent. So disable the related function while after
ExitBootServices.
Change the gBS to a internal one, because there will be a cycle
consume between UefiBootServicesTableLib and DebugLib due to the
library constructors.
Also remove the SMM support for this instance.

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

SignedCapsulePkg: Change the SMM debug lib instance

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1416

The UefiDebugLibConOut will not support DXE_SMM_DRIVER,
change UefiDebugLibConOut to BaseDebugLibNull.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

MdeModulePkg: Change the SMM debug lib instance

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1416

The UefiDebugLibConOut will not support DXE_SMM_DRIVER,
change UefiDebugLibConOut to BaseDebugLibNull.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

NetworkPkg/UefiPxeBcDxe:Add two PCD to control PXE.

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1695

Setup need provide an item for user to control IPV46 PXE boot.
Origin UefiPxeBcDxe driver doesn't have such interface.
This change added two PCD to control IPV4/6 PXE in PxeBcSupported().
Platform code should override this two PCD according to Setup value.
code change no side effect on current PXE function with default PCD.

Signed-off-by: Xue ShengfengX <shengfengx.xue@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>

OvmfPkg/BasePciCapLib: suppress invalid "nullptr deref" warning

RH covscan reports the following "nullptr deref" warning:

> Error: CLANG_WARNING:
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:312:5:
> warning: Dereference of null pointer
> #    InstanceZero->NumInstancesUnion.NumInstances++;
> #    ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:509:7:
> note: Assuming 'OutCapList' is not equal to NULL
> #  if (OutCapList == NULL) {
> #      ^~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:509:3:
> note: Taking false branch
> #  if (OutCapList == NULL) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:518:7:
> note: Assuming the condition is false
> #  if (OutCapList->Capabilities == NULL) {
> #      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:518:3:
> note: Taking false branch
> #  if (OutCapList->Capabilities == NULL) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:529:7:
> note: Assuming 'CapHdrOffsets' is not equal to NULL
> #  if (CapHdrOffsets == NULL) {
> #      ^~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:529:3:
> note: Taking false branch
> #  if (CapHdrOffsets == NULL) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:546:3:
> note: Taking false branch
> #  if (RETURN_ERROR (Status)) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:549:7:
> note: Assuming the condition is true
> #  if ((PciStatusReg & EFI_PCI_STATUS_CAPABILITY) != 0) {
> #      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:549:3:
> note: Taking true branch
> #  if ((PciStatusReg & EFI_PCI_STATUS_CAPABILITY) != 0) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:557:5:
> note: Taking false branch
> #    if (RETURN_ERROR (Status)) {
> #    ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:565:12:
> note: Assuming 'NormalCapHdrOffset' is > 0
> #    while (NormalCapHdrOffset > 0) {
> #           ^~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:565:5:
> note: Loop condition is true.  Entering loop body
> #    while (NormalCapHdrOffset > 0) {
> #    ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:570:7:
> note: Taking false branch
> #      if (RETURN_ERROR (Status)) {
> #      ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:574:16:
> note: Calling 'InsertPciCap'
> #      Status = InsertPciCap (OutCapList, CapHdrOffsets, PciCapNormal,
> #               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:235:3:
> note: Null pointer value stored to 'InstanceZero'
> #  InstanceZero = NULL;
> #  ^~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:243:7:
> note: Assuming 'PciCap' is not equal to NULL
> #  if (PciCap == NULL) {
> #      ^~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:243:3:
> note: Taking false branch
> #  if (PciCap == NULL) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:259:3:
> note: Taking false branch
> #  if (RETURN_ERROR (Status)) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:297:3:
> note: Taking false branch
> #  if (RETURN_ERROR (Status)) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:311:7:
> note: Assuming the condition is true
> #  if (PciCap->Key.Instance > 0) {
> #      ^~~~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:311:3:
> note: Taking true branch
> #  if (PciCap->Key.Instance > 0) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/Library/BasePciCapLib/BasePciCapLib.c:312:5:
> note: Dereference of null pointer
> #    InstanceZero->NumInstancesUnion.NumInstances++;
> #    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> #  310|     //
> #  311|     if (PciCap->Key.Instance > 0) {
> #  312|->     InstanceZero->NumInstancesUnion.NumInstances++;
> #  313|     }
> #  314|     return RETURN_SUCCESS;

The warning is invalid: the flagged dereferencing of "InstanceZero" is
gated by a condition that is only satisfied if we dereference
"InstanceZero" *first*.

(Perhaps the analyzer assumes that the OrderedCollectionInsert() call,
just before line 259, can change the value of "PciCap->Key.Instance" via
the last argument:

   254    //
   255    // Add PciCap to CapList.
   256    //
   257    Status = OrderedCollectionInsert (CapList->Capabilities, &PciCapEntry,
   258               PciCap);
   259    if (RETURN_ERROR (Status)) {

That assumption is incorrect.)

Add a comment and an ASSERT().

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-0994.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

OvmfPkg/AcpiPlatformDxe: catch theoretical nullptr deref in Xen code

RH covscan justifiedly reports a path through InstallXenTables() where
DsdtTable can technically remain NULL.

If this occurs in practice, then the guest and the VMM are out of sync on
the interface contract. Catch the situation with a code snippet that halts
in RELEASE builds, and in DEBUG builds lets the platform DSC control the
assert disposition first (i.e. CPU exception, deadloop, or nothing).

> Error: CLANG_WARNING:
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:309:14: warning: Access
> to field 'Length' results in a dereference of a null pointer (loaded
> from variable 'DsdtTable')
> #             DsdtTable->Length,
> #             ^~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:154:3: note: Null
> pointer value stored to 'DsdtTable'
> #  DsdtTable   = NULL;
> #  ^~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:162:3: note: Taking
> false branch
> #  if (EFI_ERROR (Status)) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:170:7: note: Assuming
> the condition is false
> #  if (XenAcpiRsdpStructurePtr->XsdtAddress) {
> #      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:170:3: note: Taking
> false branch
> #  if (XenAcpiRsdpStructurePtr->XsdtAddress) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:220:12: note: Assuming
> the condition is false
> #  else if (XenAcpiRsdpStructurePtr->RsdtAddress) {
> #           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:220:8: note: Taking
> false branch
> #  else if (XenAcpiRsdpStructurePtr->RsdtAddress) {
> #       ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:274:3: note: Taking
> false branch
> #  if (Fadt2Table) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:288:8: note: Taking
> false branch
> #  else if (Fadt1Table) {
> #       ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/Xen.c:309:14: note: Access to
> field 'Length' results in a dereference of a null pointer (loaded from
> variable 'DsdtTable')
> #             DsdtTable->Length,
> #             ^~~~~~~~~
> #  307|                AcpiProtocol,
> #  308|                DsdtTable,
> #  309|->              DsdtTable->Length,
> #  310|                &TableHandle
> #  311|                );

Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-0993.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

OvmfPkg/AcpiPlatformDxe: suppress invalid "deref of undef pointer" warning

RH covscan emits the following false positive:

> Error: CLANG_WARNING:
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:182:14:
> warning: Dereference of undefined pointer value
> #    Status = FwVol->ReadSection (
> #             ^~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:164:7: note:
> Assuming the condition is false
> #  if (QemuDetected ()) {
> #      ^~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:164:3: note:
> Taking false branch
> #  if (QemuDetected ()) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:174:3: note:
> Taking false branch
> #  if (EFI_ERROR (Status)) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:180:10: note:
> Assuming 'Status' is equal to EFI_SUCCESS
> #  while (Status == EFI_SUCCESS) {
> #         ^~~~~~~~~~~~~~~~~~~~~
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:180:3: note:
> Loop condition is true.  Entering loop body
> #  while (Status == EFI_SUCCESS) {
> #  ^
> edk2-89910a39dcfd/OvmfPkg/AcpiPlatformDxe/AcpiPlatform.c:182:14: note:
> Dereference of undefined pointer value
> #    Status = FwVol->ReadSection (
> #             ^~~~~~~~~~~~~~~~~~
> #  180|     while (Status == EFI_SUCCESS) {
> #  181|
> #  182|->     Status = FwVol->ReadSection (
> #  183|                         FwVol,
> #  184|                         (EFI_GUID*)PcdGetPtr (PcdAcpiTableStorageFile),

This is invalid because LocateFvInstanceWithTables() sets FwVol on
success.

Suppress the message by:
- assigning FwVol NULL first (this would replace the original report with
  "nullptr deref"),
- asserting that FwVol is no longer NULL, on success.

What's important here is that ASSERT() ends with ANALYZER_UNREACHABLE() on
failure.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-0991.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

OvmfPkg/QemuVideoDxe: avoid arithmetic on null pointer

The real mode interrupt vector table, which we modify for the sake of
Windows 7, starts at address 0, which happens to be the representation of
null pointers on all edk2 architectures. A null pointer may never undergo
pointer arithmetic, and RH covscan justifiedly reports:

> Error: CPPCHECK_WARNING (CWE-682):
> edk2-89910a39dcfd/OvmfPkg/QemuVideoDxe/VbeShim.c:105:
> error[nullPointerArithmetic]: Pointer addition with NULL pointer.
> #  103|     //
> #  104|     Segment0Pages = 1;
> #  105|->   Int0x10       = (IVT_ENTRY *)(UINTN)Segment0 + 0x10;
> #  106|     Segment0AllocationStatus = gBS->AllocatePages (
> #  107|                                       AllocateAddress,

Fix this by calculating the EFI_PHYSICAL_ADDRESS of IVT entry 0x10 first,
and by casting the address to the right type second.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-1002.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

CryptoPkg/BaseCryptLib: Add PKCS1v2 (RSAES-OAEP) support.

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1403

Add support for PKCS 1v2 RSAES-OAEP PKI encryption in BaseCryptLib.

Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Wang Jian J <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>

CryptoPkg/BaseCryptLib.h: Add PKCS1v2 (RSAES-OAEP) support.

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1403

Add prototype of new API Pkcs1v2Encrypt in header file to
support PKCS1v2 (RSAES-OAEP) encrypt.

Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Wang Jian J <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>

CryptoPkg/BaseCryptLib: Add new API VerifyEKUsInPkcs7Signature

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1402

Add the API VerifyEKUsInPkcs7Signature to check if x509 cert
has any or all EKUs.

Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Wang Jian J <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>

CryptoPkg/BaseCryptLib.h: Add new API VerifyEKUsInPkcs7Signature

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1402

Add a prototype of new API VerifyEKUsInPkcs7Signature.

Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Wang Jian J <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>

CryptoPkg/BaseCryptLib: Add new API to get organization name

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1401

Implement a common function to get the NID name. And use
this function to get common name and organization name.

Add a null function API X509GetOrganizationName of null
function source file.

Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Wang Jian J <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>

CryptoPkg/BaseCryptLib.h: Add new API to get organization name

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1401

Add a prototype declaration of the new API X509GetOrganizationName
in the header file.

Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Wang Jian J <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>

Vlv2TbltDevicePkg: Retire 8254 timer and 8259 module

Use HpetTimerDxe instead of SmartTimer protocol. Retire 8259 as well.
Tested boot to Win10x64 successfully.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zailiang Sun <zailiang.sun@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>

Vlv2TbltDevicePkg: Remove ResetSystem declaration

Use MdeModulePkg declaration of ResetSystem function, comment the one
in platform source code.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zailiang Sun <zailiang.sun@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>

MdeModulePkg/UefiBootManagerLib: fix crash on uninitialized ExitData

As reported by Gary, the recent LoadImage/StartImage changes to
accommodate dispatching PE/COFF images built for foreign architectures
may result in a crash when loading an IA32 option ROM into a X64 VM
running OVMF:

  Loading driver at 0x0007E537000 EntryPoint=0x0007E53C06D 8086100e.efi
  InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 7F003B98
  ProtectUefiImageCommon - 0x7F002BC0
    - 0x000000007E537000 - 0x000000000009F900
  Image type IA32 can't be started on X64 UEFI system.
  ASSERT MdeModulePkg/Core/Dxe/Mem/Pool.c(698): Head->Signature == ((('p') |
              ('h' << 8)) | ((('d') | ('0' << 8)) << 16)) || Head->Signature
              == ((('p') | ('h' << 8)) | ((('d') | ('1' << 8)) << 16))

This turns out to be caused by the deferred image loading code in BDS,
which ends up trying to free an uninitialized 'ExitData' pointer.

Given that ExitData is never actually used, let's just get rid of it
entirely. While we're at it, drop the pointless assignment of Status
as well.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

BaseTools:update ConvertFceToStructurePcd.py with the char order PCD name.

BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1718

BaseTools\Scripts\ConvertFceToStructurePcd.py
Update script to sort the PCD order base on PcdName,
then base on Pcd field name.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

BaseTools: Hash false success with back to back builds

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1692

Add error handling to the --hash feature so that hash files
are invalidated when a build error occurs.

Signed-off-by: Christian Rodriguez <christian.rodriguez@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>

BaseTools:Coding problems cause can not encode FMP Auth Header

GenerateCapsule: error: can not encode FMP Auth Header
The system cannot find the file specified.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>

BaseTools:Enable the /MP option of MSVC compiler

BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1672
The /MP option of MSVC compiler can reduce the total time to compile the
source files on the command line.

This patch is going to enable this MSVC option in BaseTools.

Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>

MdeModulePkg/CapsulePei: Update the debug code to print 64bit data

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1677

For some pointer and UINT64 data, the debug code print with '%x'.
Which would loss the upper 32bit data. So update '%x' to '%lx'
for these data. And change the pointer value from '%x' to '%p'.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/CapsulePei: Change debug MACRO

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1677

Change debug printlevel from EFI_D_ to DEBUG_.
DEBUG_ version is recommanded to use.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

IntelFsp2WrapperPkg: Perform post FSP-S process.

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1716

In API mode FSP wrapper will perform some post
FSP-S process but such process was skipped in Dispatch
mode which may impact some of the boot loaders.
To align behavior between API and Dispatch, an
End-of-Pei callback is introduced to perform same process
in Dispatch mode.

Note: If boot loader implemented its own
      PostFspsHobProcess (), it has to check
      PcdFspModeSelection and support each mode
      properly.

Test: Verified on internal platform and both
      FSP API and Dispatch modes booted successfully.

Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>

EmulatorPkg/Unix: Rename GdbRun to GdbRun.sh

https://bugzilla.tianocore.org/show_bug.cgi?id=1657

Add .sh file extension to the shell script GdbRun so
changes to this file will pass PatchCheck.py.

Also update all scripts that execute GdbRun to
execute GdbRun.sh instead.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

UefiPayloadPkg: Enhance UEFI payload for coreboot and Slim Bootloader

CorebootModulePkg and CorebootPayloadPkg originally supports coreboot only.
In order to support other bootloaders, such as Slim Bootloader, they need
be updated to be more generic.
UEFI Payload (UefiPayloadPkg) a converged package from CorebootModulePkg
and CorebootPayloadPkg with following updates:
a. Support both coreboot and Slim Bootloader
b. Removed SataControllerDxe and BaseSerialPortLib16550 to use EDK2 modules
c. Support passing bootloader parameter to UEFI payload, e.g. coreboot
   table from coreboot or HOB list from Slim Bootloader
d. Using GraphicsOutputDxe from EDK2 with minor change instead of FbGop
e. Remove the dependency to IntelFrameworkPkg and IntelFrameworkModulePkg
   and QuarkSocPkg
f. Use BaseDebugLibSerialPort library as DebugLib
g. Use HPET timer, drop legacy 8254 timer support
h. Use BaseXApicX2ApicLib instead of BaseXApicLib
i. Remove HOB gUefiFrameBufferInfoGuid to use EDK2 graphics HOBs.
j. Other clean ups

On how UefiPayloadPkg could work with coreboot/Slim Bootloader, please
refer UefiPayloadPkg/BuildAndIntegrationInstructions.txt

Once UefiPayloadPkg is checked-in, CorebootModulePkg and CorebootPayloadPkg
could be retired.

Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>

CorebootPayloadPkg: Remove the dependency of ShellBinPkg

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1675

In long term we will remove ShellBinPkg, so now we update
platform to use ShellPkg only.

Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>

MdeModulePkg/DxeCore: remove explicit EBC handling

Now that the EBC machine type is no longer classified as a
natively supported machine type on the architectures that can
support it via the EBC interpreter, the EBC specific handling
in DXE core is no longer used and can be removed.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdePkg/UefiBaseType.h: treat EBC as a non-native machine type

Instead of classifying EBC as a supported machine type and have special
handling in DXE core for loading EBC images, make it a foreign type and
rely on the EDK2 PE/COFF image emulator protocol to claim the image when
the DXE core finds that it cannot be supported natively.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/EbcDxe: implement the PE/COFF emulator protocol

Implement the new EDK2 PE/COFF image emulator protocol so that we can
remove the EBC specific handling in the DXE core and other places in
the core code.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/UefiBootManagerLib: allow foreign Driver#### images

Allow PE/COFF images that must execute under emulation for Driver####
options, by removing the redundant machine type check from the BDS code.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/PciBusDxe: dispatch option ROMs for foreign architectures

Delete the explicit machine type check for option ROM images, and instead,
rely on the LoadImage() boot service to decide whether an option ROM can
be dispatched or not. This permits platforms to ship with emulators to
execute option ROMs that are not native to the processor architecture.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg/DxeCore: invoke the emulator protocol for foreign images

When encountering PE/COFF images that cannot be supported natively,
attempt to locate an instance of the PE/COFF image emulator protocol,
and if it supports the image, proceed with loading it and register it
with the emulator.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdeModulePkg: introduce PE/COFF image emulator protocol

Introduce a protocol that can be invoked by the image loading services
to execute foreign architecture PE/COFF images via an emulator.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>

MdePkg/BaseLib: Remove LongJump.c and SetJump.c

MdePkg BaseLib still uses the inline X86 assembly code
in C code files.For now, inline SetJump/LongJump() can be removed.
https://bugzilla.tianocore.org/show_bug.cgi?id=1163

Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>

OvmfPkg/XenBusDxe: replace MIT license text with SPDX ID

The "XenBus.c", "XenStore.c", "XenStore.h" files under "OvmfPkg/XenBusDxe"
include the MIT License text. Replace those license blocks with
"SPDX-License-Identifier: MIT" (which refers to
<https://spdx.org/licenses/MIT.html>) for easier parsing by machines (and
humans).

This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>.

Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Lars Kurth <lars.kurth@citrix.com>
Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>

OvmfPkg/IndustryStandard/Xen: replace MIT license text with SPDX ID

The header files under "OvmfPkg/Include/IndustryStandard/Xen" include the
MIT License text. Replace those license blocks with
"SPDX-License-Identifier: MIT" (which refers to
<https://spdx.org/licenses/MIT.html>) for easier parsing by machines (and
humans).

This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>.

Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Lars Kurth <lars.kurth@citrix.com>
Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>

OvmfPkg/License.txt: refresh the MIT license text and include the SPDX ID

Refresh the MIT license text from <https://spdx.org/licenses/MIT.html>,
and add "SPDX-License-Identifier: MIT" for easier parsing by machines.

This follows the tree-wide adoption of "SPDX-License-Identifier"s, made
for <https://bugzilla.tianocore.org/show_bug.cgi?id=1373>; in particular:

- commit 304bff7223a8 ("edk2: Change License.txt from 2-Clause BSD to
  BSD+Patent", 2019-04-09),

- commit 75fae505b735 ("OvmfPkg: Change License.txt from 2-Clause BSD to
  BSD+Patent", 2019-04-09).

Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Lars Kurth <lars.kurth@citrix.com>
Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>

OvmfPkg/License.txt: remove XenPvBlkDxe from the MIT licensed dir list

All files under "OvmfPkg/XenPvBlkDxe" carry

  SPDX-License-Identifier: BSD-2-Clause-Patent

None of them are MIT-licensed.

Update "OvmfPkg/License.txt" accordingly.

Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Lars Kurth <lars.kurth@citrix.com>
Cc: xen-devel@lists.xenproject.org
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1654
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>

ShellPkg: Clarify the description of acpiview option '-s'

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1153

The '-s' option of 'acpiview' do not support multiply invcation options.
So clarify it for users.
Modify the help decription for UefiShellAcpiViewCommandLib which the
description is equal or over 80 column. If the line include equal or over
80 characters. The display engine would display a blank line for those
equal 80 characters or a extra line with few words for those over 80
character. So it is better to keep each line less than 80 characters.

Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>

OvmfPkg: Update DSC/FDF files to consume 8259/8254 drivers in OvmfPkg

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496

This commit updates the OVMF DSC/FDF files to consume the copied
8259InterruptControllerDxe and 8254TimerDxe drivers within OvmfPkg.

The unconsumed PCD:
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel

is removed from DSC files as well.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

OvmfPkg/8254TimerDxe: Update to make it build for OVMF

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496

This commit will remove the IntelFrameworkPkg DEC file dependency in the
driver INF file.

A new GUID has been updated for the INF file.

Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.

Please note that a subsequent commit (final patch of the series) will:

A) Add OvmfPkg/8254TimerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8254TimerDxe driver in OVMF
DSC/FDF files.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

OvmfPkg: Copy 8254TimerDxe driver from PcAtChipsetPkg

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496

This commit copies the exact 8254TimerDxe driver from PcAtChipsetPkg to
OvmfPkg.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

OvmfPkg/AcpiPlatformDxe: Consume the 8259 PCD defined in OvmfPkg

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496

Several updates have been made to the OvmfPkg/AcpiPlatformDxe driver to
drop its dependency on PcAtChipsetPkg:

A) Consumes the PCD 'Pcd8259LegacyModeEdgeLevel' defined within OvmfPkg;
B) Remove the PcAtChipsetPkg DEC file dependency in the driver INF file.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

OvmfPkg/8259InterruptControllerDxe: Update to make it build for OVMF

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496

Several updates have been made to the
OvmfPkg/8259InterruptControllerDxe driver to make it build under OvmfPkg:

A) Update the driver INF file to consume PCDs defined within OvmfPkg;
B) Remove the unnecessary dependency on the IntelFrameworkPkg header file
   'FrameworkDxe.h';
C) Remove the IntelFrameworkPkg & PcAtChipsetPkg DEC files dependency in
   the driver INF file.

A new GUID has been updated for the INF file.

Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.

Please note that a subsequent commit (final patch of the series) will:

A) Add OvmfPkg/8259InterruptControllerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8259InterruptControllerDxe
   driver in OVMF DSC/FDF files;
C) Remove the consumption of
   gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel in OVMF DSC
   files.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>