jcarsey [Tue, 17 May 2011 20:32:47 +0000 (20:32 +0000)]
Clarify an error in Map command.
Revert a change in Map command that affected some consistent map names being printed correctly.
Fix a library instance mapping in DSC.
lzeng14 [Tue, 17 May 2011 08:56:03 +0000 (08:56 +0000)]
According to PI_1_2_Errata_B, EFI_FFS_INTEGRITY_CHECK.Checksum.File should be 8-bit checksum of the file data, not the entire file, correct the comments.
rsun3 [Tue, 17 May 2011 08:35:20 +0000 (08:35 +0000)]
A complement fix for revision 11664 to update GCC assembly files : clear the direction flag in interrupt/exception handlers' assembly entry code before calling C functions to follow the UEFI calling convention.
jcarsey [Mon, 16 May 2011 22:20:11 +0000 (22:20 +0000)]
add required 'profiles.txt' file to the binary releases.
add 'minimal' version of the shell (without any profiles).
update to current ShellPkg tip version.
jcarsey [Mon, 16 May 2011 22:12:20 +0000 (22:12 +0000)]
add support to easily remove profiles and shell levels. the libraries will not do anything (but no longer fail), if the PCDs are changed to remove their functionality.
jcarsey [Mon, 16 May 2011 21:08:34 +0000 (21:08 +0000)]
added support for -i and -o for HII based configurations.
added support for all EFI_DRIVER_CONFIGURATION(2) based configurations.
added support for display of all configurable handles.
jljusten [Sun, 15 May 2011 17:23:33 +0000 (17:23 +0000)]
InOsEmuPkg: Use EdkShellBinPkg by default
The following can be defined on the build command line:
* BUILD_NEW_SHELL: Build & run the UefiShell
* USE_NEW_SHELL: Use the pre-build UefiShell binary
* BUILD_OLD_SHELL: Use the GCC shell binary previously built
For the FAT driver:
* BUILD_FAT: Build the fat driver from source
andrewfish [Sat, 14 May 2011 16:00:22 +0000 (16:00 +0000)]
Added generic EFIABI SEC to InOsEmuPkg. Add library to abstract FV cracking and remove code from original Sec/OS App. Add a PeiServicesLib wrapper for SEC that uses passed in PEI list and can abstract FV reading. Don't load images for XIP code and just run from FV directly on Mac OS X, or from dlopen on Linux. Moved temp ram switch code into generic SEC. Fixed design issue with PeiServiceTablePointerLib.
andrewfish [Fri, 13 May 2011 00:03:26 +0000 (00:03 +0000)]
Add MP support. Based on PcdEmuApCount APs (Application Processors) are created in the CpuRuntimeDxe driver. If PcdEmuApCount > 0 then the MpServices protocol is created on top of pthreads and the APs are availible to use vis the MpService protocol.
andrewfish [Wed, 11 May 2011 18:31:20 +0000 (18:31 +0000)]
Add InOsEmuPkg. Like UnixPkg and Nt32Pkg, but EFI code can be common and does not require including system include files. Currently only Unix 64-bit is supported and it has only been tested on Mac OS X. Not all features are ported over, but GOP, via X11, and access to local file systems are supported and you can boot to the shell.
mdkinney [Mon, 9 May 2011 17:52:22 +0000 (17:52 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:51:58 +0000 (17:51 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:51:36 +0000 (17:51 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:51:18 +0000 (17:51 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:51:00 +0000 (17:51 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:50:40 +0000 (17:50 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:50:20 +0000 (17:50 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:49:59 +0000 (17:49 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:49:17 +0000 (17:49 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:48:32 +0000 (17:48 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
mdkinney [Mon, 9 May 2011 17:48:14 +0000 (17:48 +0000)]
Clean up DEC files:
1) Remove section header comment blocks that do not provide any information
2) Combine PCDs listed in multiple sections into a single section that supports multiple PCD types to reduce maintenance overhead
3) Remove ModuleTypeList comments from [Includes], [Protocols], [Ppis], and [Guids] sections that do not properly describe the module type restrictions.
4) Clean up formatting of GUID structure declarations
5) Remove ".common" from section names if they are not required.
6) Order sections consistently as [Defines], [Includes], [LibraryClasses], [Guid], [Ppis], [Protocols], [PcdsFeatureFlag], [PcdsFixedAtBuild], [PcdsPatchableInModule], [PcdsDynamic], and [PcdsDynamicEx]
vanjeff [Wed, 4 May 2011 01:06:43 +0000 (01:06 +0000)]
1.Move the definitions of SCAN_F11 and SCAN_F12 from SimpleTextIn.h to SimpleTextInEx.h because they are defined in Table - EFI Scan Codes for EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.
2.Include SimpleTextIn.h in SimpleTextInEx.h because EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL is an extension of the EFI_SIMPLE_TEXT_INPUT_PROTOCOL.
3.Include SimpleTextInEx.h in UefiSpec.h.
li-elvin [Wed, 4 May 2011 01:06:36 +0000 (01:06 +0000)]
Remove disabling keyboard/auxiliary interface in Driver Binding Protocol.Stop() of Ps2KeyboardDxe/Ps2MouseDxe/Ps2MouseAbsolutePointer driver so that PS/2 keyboard and mouse can be used with legacy option ROMs after all EFI drivers have been disconnected.
vanjeff [Wed, 4 May 2011 01:01:42 +0000 (01:01 +0000)]
Add the definition of EFI_2_31_SYSTEM_TABLE_REVISION and update EFI_SYSTEM_TABLE_REVISION & EFI_RUNTIME_SERVICES_REVISION & EFI_BOOT_SERVICES_REVISION to EFI_2_31_SYSTEM_TABLE_REVISION.
Correct typo: GCC 5.4 --> GCC 4.5.
Change name from Intel(R) UADK to EADK, the EDK II Application Development Kit.
Add more information on restrictions present in this version.
Standard Libraries for EDK II.
This set of three packages: AppPkg, StdLib, StdLibPrivateInternalFiles; contains the implementation of libraries based upon non-UEFI standards such as ISO/IEC-9899, the library portion of the C Language Standard, POSIX, etc.
AppPkg contains applications that make use of the standard libraries defined in the StdLib Package.
StdLib contains header (include) files and the implementations of the standard libraries.
StdLibPrivateInternalFiles contains files for the exclusive use of the library implementations in StdLib. These files should never be directly referenced from applications or other code.
1) MEM_POLL stall time is incorrect.
Framework version: Duration is used for Stall(), which is Microseconds.
Total time is: Duration(Microseconds) * LoopTimes.
PI version: Duration is always 100ns. Delay is LoopTimes.
Total time is: 100ns * Delay.
So Delay = Duration(Microseconds) * LoopTimes / 100ns
= Duration * 1000ns * LoopTimes / 100ns
= Duration * 10 * LoopTimes
2) MEM_POLL BitMask/BitValue order is incorrect.
Framework version: First BitMask, then BitValue
PI version: First Data, then DataMask
So we revert their order in function call
1. Change guid name from EFI_CERT_X509 to EFI_CERT_X509_GUID, per UEFI Specification. 2.3.1.
2. Add the declaration for EFI_CERT_SHA224_GUID, EFI_CERT_SHA384_GUID and EFI_CERT_SHA512_GUID.
3. Update GUIDs description per UEFI Specification, 2.3.1.
ArmPlatformPkg/ArmPlatformLib: Renamed ArmPlatformInitialize into ArmPlatformSecInitialize
Some platforms require some of their controllers to be initialized in Secure world.
This function make the difference between Secure and Normal world platform initialization.
ArmPlatform: Remove dummy padding to make the Reset Vector aligned on 32 bytes boundary
A dummy padding was added before the Reset Vectors to force the alignment on a
32 bytes boundary in XIP code.
The correct fix is to define the alignment in the FDF file.
Change BlockIo drivers to return EFI_NO_MEDIA or EFI_MEDIA_CHANGED even the Buffer/BufferSize/Lba is invalid so that caller can probe the media status easier.
Change BlockIo drivers to return EFI_NO_MEDIA or EFI_MEDIA_CHANGED even the Buffer/BufferSize/Lba is invalid so that caller can probe the media status easier.
projects / mirror_edk2.git / log