mirror_edk2.git
3 years agoCorebootModulePkg/CbSupportDxe: Remove duplicated IO Space addition
Benjamin You [Tue, 14 Nov 2017 08:41:13 +0000 (16:41 +0800)]
CorebootModulePkg/CbSupportDxe: Remove duplicated IO Space addition

Since UefiCpuPkg's CpuDxe Driver already adds Local Apic's MMIO space to
GCD, CorebootModulePkg's CbSupportDxe should not do this again. Doing this
again causes error return status from GCD service, and ASSERT (FALSE) with
debug build, so the duplicated addition is removed.

Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
3 years agoShellPkg/Shell: Check the OpenVolume result in OpenRootByHandle()
Hao Wu [Tue, 14 Nov 2017 05:29:03 +0000 (13:29 +0800)]
ShellPkg/Shell: Check the OpenVolume result in OpenRootByHandle()

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=779

For the API EfiShellOpenRootByHandle():

The return status of the call to SimpleFileSystem->OpenVolume should be
checked.

It is possible that there is a media change in the device (like CD/DVD
ROM). In such case, the volume root opened and/or the device path opened
previously (also within EfiShellOpenRootByHandle) may be invalid.

This commit adds a check for the result of OpenVolume before subsequently
calling functions like EfiShellGetMapFromDevicePath() &
ConvertEfiFileProtocolToShellHandle().

Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
3 years agoMdeModulePkg/PartitionDxe: Fix UDF fs access on certain CD/DVD medias
Paulo Alcantara [Fri, 13 Oct 2017 13:24:49 +0000 (21:24 +0800)]
MdeModulePkg/PartitionDxe: Fix UDF fs access on certain CD/DVD medias

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=725

Historically many drives or medias do not correctly return their value
for block N - which is also referred as last addressable/recorded block.
When they do so, there is still a problem when relying on last recorded
block number returned by SCSI commands READ CAPACITY and READ TRACK
INFORMATION - that is, between block 0 and block N there may be
unwritten blocks which are located outside any track.

That said, the Partition driver was unable to find AVDP at block N on
certain medias that do not either return or report their last recorded
block number correctly.

Apparently there is no official or correct way to find the correct block
number, however tools like the Philips UDF Conformance Tool (udf_test)
apply a correction by searching for an AVDP or VAT in blocks N through
N-456 -- this can be observed by looking at the log reported by udf_test
on those CD/DVD medias. So, if the AVDP or VAT is found, then it sets
the last recorded block number to where AVDP or VAT was located.

With the below setence in UDF 2.60, 6.13.2.2 Background Physical
Formatting:

"... the second AVDP must be recorded after the Background physical
Formatting has been finished..."

Implies that the last recorded block is the one where second AVDP was
recorded.

This patch implements a similar way to correct the last recorded block
number by searching for last AVDP in blocks N-1 through N-512 on those
certain medias, as well as ensure a minimum number of 2 AVDPs found as
specified by ECMA 167 and UDF 2.60 specifications.

Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Reported-by: Hao Wu <hao.a.wu@intel.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
3 years agoQuarkPlatformPkg/PlatformBootManagerLib: Update boot mode handling
Michael D Kinney [Tue, 7 Nov 2017 22:36:28 +0000 (14:36 -0800)]
QuarkPlatformPkg/PlatformBootManagerLib: Update boot mode handling

https://bugzilla.tianocore.org/show_bug.cgi?id=768

Update and simplify boot mode handling logic.  This includes
performing minimum connects for the following boot modes:

  BOOT_ASSUMING_NO_CONFIGURATION_CHANGES
  BOOT_WITH_MINIMAL_CONFIGURATION
  BOOT_ON_S4_RESUME

Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
3 years agoQuarkPlatformPkg/Readme.md: Fix markdown format issue
Michael D Kinney [Wed, 8 Nov 2017 23:53:03 +0000 (15:53 -0800)]
QuarkPlatformPkg/Readme.md: Fix markdown format issue

https://bugzilla.tianocore.org/show_bug.cgi?id=769

Remove extra carriage return that causes formatting
issues.

Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
3 years agoMdeModulePkg/UsbMassStorageDxe: Fix USB Mass Storage detection
Michael D Kinney [Mon, 30 Oct 2017 20:57:32 +0000 (13:57 -0700)]
MdeModulePkg/UsbMassStorageDxe: Fix USB Mass Storage detection

https://bugzilla.tianocore.org/show_bug.cgi?id=766

Update logic to not return an error from UsbBootRequestSense()
if a Request Sense command responds with no sense information.
It is legal for a USB mass storage device to respond to a
Request Sense command with a SenseKey of
USB_BOOT_SENSE_NO_SENSE and an Additional Sense
Code of USB_BOOT_ASC_NO_ADDITIONAL_SENSE_INFORMATION.

This is described in Section 3.3 of the Universal Serial
Bus Mass Storage Specification For Bootability:

http://www.usb.org/developers/docs/devclass_docs/usb_msc_boot_1.0.pdf

The previous logic returned an error of EFI_NO_RESPONSE
and this caused USB mass storage devices such as a USB
floppy drive to not be detected.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoShellPkg: Fix MSFT C4255 warning
Song, BinX [Fri, 10 Nov 2017 04:11:35 +0000 (12:11 +0800)]
ShellPkg: Fix MSFT C4255 warning

V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.

From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
3 years agoNetworkPkg: Fix MSFT C4255 warning
Song, BinX [Fri, 10 Nov 2017 04:11:23 +0000 (12:11 +0800)]
NetworkPkg: Fix MSFT C4255 warning

V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.

From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoMdePkg: Fix MSFT C4255 warning
Song, BinX [Fri, 10 Nov 2017 04:11:11 +0000 (12:11 +0800)]
MdePkg: Fix MSFT C4255 warning

V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.

From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoMdeModulePkg: Fix MSFT C4255 warning
Song, BinX [Fri, 10 Nov 2017 04:11:02 +0000 (12:11 +0800)]
MdeModulePkg: Fix MSFT C4255 warning

V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.

From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoIntelFrameworkModulePkg: Fix MSFT C4255 warning
Song, BinX [Fri, 10 Nov 2017 04:10:48 +0000 (12:10 +0800)]
IntelFrameworkModulePkg: Fix MSFT C4255 warning

V2:
Fix MSFT C4255 warning
V1:
Enable MSFT C4255 warning.

From MSDN:
Compiler Warning (level 4) C4255
function' : no function prototype given: converting '()' to '(void)'
The compiler did not find an explicit list of arguments to a function.
This warning is for the C compiler only.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bell Song <binx.song@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoBaseTools: Fix the bug to re-build uni file for Library
Yonghong Zhu [Mon, 13 Nov 2017 02:50:49 +0000 (10:50 +0800)]
BaseTools: Fix the bug to re-build uni file for Library

The root cause is Module's self.CanSkip() is before LibraryAutoGen,
then when a uni file of library is changed, Module's self.CanSkip() is
still true which cause the library is not regenerated.
This patch change Module's self.CanSkip() after LibraryAutoGen.

Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=759
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoMdeModulePkg/Core/Dxe: Remove extra connects for UEFI Applications
Michael D Kinney [Tue, 7 Nov 2017 00:57:36 +0000 (16:57 -0800)]
MdeModulePkg/Core/Dxe: Remove extra connects for UEFI Applications

https://bugzilla.tianocore.org/show_bug.cgi?id=765

The UEFI Specification Boot Services chapter, StartImage() service,
EFF 1.10 Extension requires extra calls to ConnectController()
if a UEFI Driver produces handles. The DXE Core is performing these
extra calls to ConnectController() without evaluating the ImageType.

A filter is added to not make extra calls to ConnectController()
if the ImageType is EFI_IMAGE_SUBSYSTEM_EFI_APPLICATION.

Without this filter, extra calls to ConnectController() may be
performed by UEFI Applications or a UEFI Shell Applications that
also call ConnectController().

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoMdeModulePkg/TerminalDxe: Fix PCANSI mapping for TRIANGLE and ARROW
Michael D Kinney [Tue, 7 Nov 2017 01:11:17 +0000 (17:11 -0800)]
MdeModulePkg/TerminalDxe: Fix PCANSI mapping for TRIANGLE and ARROW

https://bugzilla.tianocore.org/show_bug.cgi?id=761

When a TerminalType is set to PCANSI, characters in the range 0x00
to 0x1F are control characters.  The mapping table for PCANSI maps
TRIANGLE glyphs, ARROW_UP glyph, and ARROW_DOWN glyph into this
control character range and that causes no characters to be
displayed by PCANSI compatible terminal emulators.

The mappings are updated so these glyphs are mapped to ANSI
characters in the range 0x20 to 0x7E.

GEOMETRICSHAPE_UP_TRIANGLE     '^'
GEOMETRICSHAPE_RIGHT_TRIANGLE  '>'
GEOMETRICSHAPE_DOWN_TRIANGLE   'v'
GEOMETRICSHAPE_LEFT_TRIANGLE   '<'
ARROW_UP                       '^'
ARROW_DOWN                     'v'

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <Ruiyu.ni@intel.com>
3 years agoStdLib/BsdSocketLib: Remove unused variables
Thiebaud Weksteen [Thu, 26 Oct 2017 09:58:15 +0000 (02:58 -0700)]
StdLib/BsdSocketLib: Remove unused variables

TianoCore BZ#677

Remove unused variables and turn nsdispatch macro into a function. This
is not what is recommended in the bug ticket but avoid heavier
modification of the code (and deviation from upsteam).

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thiebaud Weksteen <tweek@google.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
3 years agoArmPlatformPkg/PL031RealTimeClockLib: ignore DST setting when timezone is set
Ard Biesheuvel [Mon, 6 Nov 2017 18:08:15 +0000 (18:08 +0000)]
ArmPlatformPkg/PL031RealTimeClockLib: ignore DST setting when timezone is set

According to the UEFI spec, the timezone setting which the platform needs
to record in addition to the actual date and time already reflects the
current DST setting. In other words, moving the clock from standard time
to daylight saving time also involves adding or subtracting 60 minutes
from the timezone setting, as well as flicking the EFI_TIME_IN_DAYLIGHT
bit in the DST setting.

This means we need to disregard the DST setting if the timezone is
specified, and only add or subtract the additional hour if we are on
local time.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoArmPlatformPkg/PL031RealTimeClockLib: remove validation and DST handling
Ard Biesheuvel [Sun, 5 Nov 2017 16:31:23 +0000 (16:31 +0000)]
ArmPlatformPkg/PL031RealTimeClockLib: remove validation and DST handling

This library, which is intended to encapsulate the hardware specifics
of the ARM PL031 RTC, also implements its own input validation routines
and record the timezone and DST settings in its own set of EFI variables.

This functionality has recently been added to the core driver, so let's
remove it here.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoEmbeddedPkg/RealTimeClockRuntimeDxe: move common functionality into core
Ard Biesheuvel [Sun, 5 Nov 2017 16:06:17 +0000 (16:06 +0000)]
EmbeddedPkg/RealTimeClockRuntimeDxe: move common functionality into core

RealTimeClockRuntimeDxe defers the hardware/platform specific handling
of reading/setting the hardware clock to RealTimeClockLib, but for
unknown reasons, it also defers common functionality such as input
validation and recording the timezone and DST settings (which are
informational only and not managed by hardware)

This has led to a lot of duplication in implementations of RealTimeClockLib
as well as TimeBaseLib, to the point where each library implementation
has its own set of UEFI variables to record the timezone and DST settings.
This makes little sense, and so let's update RealTimeClockRuntimeDxe now
to allow future implementations to rely on the core driver to take care of
these things.

Note that reading the timezone and DST settings occurs before calling into
the library, so we can phase out this behavior gradually from library
implementations in EDK2, edk2-platforms or out of tree.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoMdeModulePkg: Update IP4 stack to support point-to-point link with 31-bit mask.
Fu Siyuan [Wed, 18 Oct 2017 02:13:39 +0000 (10:13 +0800)]
MdeModulePkg: Update IP4 stack to support point-to-point link with 31-bit mask.

V2 update: Directly use NetIp4IsUnicast() to check station address in IP driver.

This patch is to follow RFC3021 which allows to use 31-bit mask
in point-to-point link.
If a 31-bit subnet mask is assigned to a point-to-point link, it
leaves the <Host-number> with only 1 bit.  Consequently, only two
possible addresses may result:
  {<Network-number>, 0} and {<Network-number>, -1}
These addresses have historically been associated with network and
broadcast addresses (see Section 2.2).  In a point-to-point link with
a 31-bit subnet mask, the two addresses above MUST be interpreted as
host addresses.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
3 years agoMdePkg: Add definitions for the SPI protocols introduced in PI 1.6.
Marvin.Haeuser@outlook.com [Tue, 31 Oct 2017 00:12:22 +0000 (08:12 +0800)]
MdePkg: Add definitions for the SPI protocols introduced in PI 1.6.

This commit adds header files for the SPI protocols introduced in the
UEFI PI 1.6 specification, as well as their GUIDs to MdePkg.dec.

EFI_SPI_TRANSACTION_TYPE assumes an enum with its members ordered the
way they are listed in the specification, as there are no values given
explicitely.
EFI_LEGACY_SPI_CONTROLLER_GUID assumes the character 'l' used in the
specification was meant to be '1'.

V2:
- Fixed LegacySpiFlash.h's header guard.
- Fixed LegacySpiSmmController's GUID name.
- Removed EFI_SPI_NOR_FLASH_PROTOCOL_LF_READ_DATA as it's unused.
- Added the missing SpiSmmNorFlash header.
- Fixed all file endings to be CRLF.
- Removed trailing whitespaces.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marvin Haeuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoArmPlatformPkg/PrePeiCore: seed temporary stack before entering PEI core
Ard Biesheuvel [Fri, 20 Oct 2017 10:44:04 +0000 (11:44 +0100)]
ArmPlatformPkg/PrePeiCore: seed temporary stack before entering PEI core

DEBUG builds of PEI code will print a diagnostic message regarding
the utilization of temporary RAM before switching to permanent RAM.
For example,

  Total temporary memory:    16352 bytes.
    temporary memory stack ever used:       4820 bytes.
    temporary memory heap used for HobList: 4720 bytes.

Tracking stack utilization like this requires the stack to be seeded
with a known magic value, and this needs to occur before entering C
code, given that it uses the stack. Currently, only Nt32Pkg appears
to implement this feature, but it is useful nonetheless, so let's
wire it up for PrePeiCore.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoMdePkg/NvdimmLabel.h: Add NVDIMM_LABEL protocol definition
Ruiyu Ni [Wed, 1 Nov 2017 09:34:52 +0000 (17:34 +0800)]
MdePkg/NvdimmLabel.h: Add NVDIMM_LABEL protocol definition

NVDIMM_LABEL protocol is defined in UEFI 2.7 spec, to provide
services that allow management of labels contained in a Label
Storage Area in NVDIMM.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoMdePkg/Btt.h: Add Block Translation Table definitions
Ruiyu Ni [Wed, 1 Nov 2017 05:59:38 +0000 (13:59 +0800)]
MdePkg/Btt.h: Add Block Translation Table definitions

BTT definitions are defined in UEFI spec 2.7, to defines
a layout and set of rules for doing block I/O that provide
powerfail write atomicity of a single block in NVDIMM.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoMdeModulePkg SerialDxe: Handle Timeout change more robustly
Star Zeng [Fri, 27 Oct 2017 03:14:11 +0000 (11:14 +0800)]
MdeModulePkg SerialDxe: Handle Timeout change more robustly

https://lists.01.org/pipermail/edk2-devel/2017-October/016479.html
reported "Xen Console input very slow in recent UEFI" that appears
after 4cf3f37c87ba1f9d58072444bd735e40e4779e70 "MdeModulePkg
SerialDxe: Process timeout consistently in SerialRead".

Julien did more debugging and find out the following is happening in
TerminalConInTimerHandler (MdeModulePkg/Universal/Console/TerminalDxe)
when a character is received:
1) GetControl will return EFI_SERIAL_INPUT_BUFFER_EMPTY unset
  => Entering in the loop to fetch character from the serial
2) GetOneKeyFromSerial()
  => Return directly with the character read
3) Looping as the fifo is not full and no error
4) GetOneKeyFromSerial() -> SerialRead()
  => No more character so SerialPortPoll() will return FALSE and loop
     until timeout
  => Return EFI_TIMEOUT
5) Exiting the loop from TerminalConInTimerHandler
6) Characters are printed

After some investigation, I found it is related to the Timeout value.

The Timeout is 1000000 (1s) by default to follow UEFI spec.
And the Terminal driver will recalculate and set the Timeout value
based on the properties of UART in TerminalDriverBindingStart()/
TerminalConInTimerHandler().

  SerialInTimeOut = 0;
  if (Mode->BaudRate != 0) {
    //
    // According to BAUD rate to calculate the timeout value.
    //
    SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) *
                      2 * 1000000 / (UINTN) Mode->BaudRate;
  }

For example, based on the PCD values of PcdUartDefaultBaudRate,
PcdUartDefaultDataBits and PcdUartDefaultStopBits, SerialInTimeOut =
(1 + 8  + 1) * 2 * 1000000 / (UINTN) 115200 = 173 (us).

When SerialDxe is used,
TerminalDriverBindingStart()/TerminalConInTimerHandler() ->
  SerialIo->SetAttributes() ->
    SerialSetAttributes() ->
      SerialPortSetAttributes()

Some implementations of SerialPortSetAttributes() could handle the
input parameters and return RETURN_SUCCESS, for example
BaseSerialPortLib16550, then Timeout value will be changed to 173 (us),
no "slow down" will be observed.
But some implementations of SerialPortSetAttributes() just return
RETURN_UNSUPPORTED, for example XenConsoleSerialPortLib, then Timeout
value will be not changed and kept 1000000 (1s), "slow down" will be
observed.

SerialPortLib instance can be enhanced to
1. Handle the input parameters and return status accordingly instead of
just returning RETURN_UNSUPPORTED in SerialPortSetAttributes().
2. Just return RETURN_SUCCESS instead of RETURN_UNSUPPORTED in
SerialPortSetAttributes() if the instance does not care the input
parameters at all.

And SerialDxe can also be enhanced like this patch to be more robust
to handle Timeout change.

Cc: Julien Grall <julien.grall@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Compare against the original parameters
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@linaro.org>
3 years agoIntelFsp2Pkg-Tools: GenCfgOpt.py shouldn't include specific UPD name
Chasel, Chiu [Wed, 8 Nov 2017 12:35:26 +0000 (20:35 +0800)]
IntelFsp2Pkg-Tools: GenCfgOpt.py shouldn't include specific UPD name

PcdSerialIoUartDebugEnable UPD is platform specific and should not
be included in generic GenCfgOpt.py script. Remove this and platform
DSC should control the default value instead.

Cc: Jiewen Yao <Jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
3 years agoIntelFrameworkModulePkg: Fix misuses of AllocateCopyPool
Jian J Wang [Wed, 8 Nov 2017 02:09:54 +0000 (10:09 +0800)]
IntelFrameworkModulePkg: Fix misuses of AllocateCopyPool

AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.

One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.

Cc: Liming Gao <liming.gao@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
3 years agoShellPkg: Fix misuses of AllocateCopyPool
Jian J Wang [Wed, 8 Nov 2017 02:09:19 +0000 (10:09 +0800)]
ShellPkg: Fix misuses of AllocateCopyPool

AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.

One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.

Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
3 years agoMdeModulePkg: Fix misuses of AllocateCopyPool
Jian J Wang [Wed, 1 Nov 2017 15:18:34 +0000 (23:18 +0800)]
MdeModulePkg: Fix misuses of AllocateCopyPool

AllocateCopyPool(AllocationSize, *Buffer) will copy "AllocationSize" bytes of
memory from old "Buffer" to new allocated one. If "AllocationSize" is bigger
than size of "Buffer", heap memory overflow occurs during copy.

One solution is to allocate pool first then copy the necessary bytes to new
memory. Another is using ReallocatePool instead if old buffer will be freed
on spot.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Bi Dandan <dandan.bi@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
3 years agoShellPkg/dh: Fix wrong output when dumping PciRootBridgeIo
Ruiyu Ni [Tue, 7 Nov 2017 07:34:23 +0000 (15:34 +0800)]
ShellPkg/dh: Fix wrong output when dumping PciRootBridgeIo

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
3 years agoMdeModulePkg/NonDiscoverable: fix memory override bug
Heyi Guo [Mon, 30 Oct 2017 05:47:52 +0000 (13:47 +0800)]
MdeModulePkg/NonDiscoverable: fix memory override bug

For PciIoPciRead interface, memory prior to Buffer would be written
with zeros if Offset was larger than sizeof (Dev->ConfigSpace), which
would cause serious system exception.

So we add a pre-check branch to avoid memory override.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
3 years agoMdePkg/PciExpress21.h: Fix typo in PCI_REG_PCIE_SLOT_CONTROL
Ruiyu Ni [Thu, 26 Oct 2017 08:06:56 +0000 (16:06 +0800)]
MdePkg/PciExpress21.h: Fix typo in PCI_REG_PCIE_SLOT_CONTROL

PCI_REG_PCIE_SLOT_CONTROL contains a typo. It is defined as:
typedef union {
  struct {
    UINT32 AttentionButtonPressed : 1;
    UINT32 ...
    ...
  } Bits;
  UINT16   Uint16;
} PCI_REG_PCIE_SLOT_CONTROL;

The bit field data type should be UINT16 instead of UINT32,
results sizeof (PCI_REG_PCIE_SLOT_CONTROL) equals to 4 instead of 2.

Because this structure is used in PCI_CAPABILITY_PCIEXP as below:
typedef struct {
  ...
  PCI_REG_PCIE_SLOT_CONTROL       SlotControl;
  PCI_REG_PCIE_SLOT_STATUS        SlotStatus;
} PCI_CAPABILITY_PCIEXP;

It cause the OFFSET_OF (PCI_CAPABILITY_PCIEXP, SlotStatus) equal
to a wrong value.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoPcAtChipsetPkg/IsaAcpiDxe: Restore PCI attributes correctly
Ruiyu Ni [Thu, 2 Nov 2017 01:21:56 +0000 (09:21 +0800)]
PcAtChipsetPkg/IsaAcpiDxe: Restore PCI attributes correctly

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=405

The original code enables some BITs in PCI attributes in Start(),
but wrongly to disable these BITs in Stop().

The correct behavior is to save the original PCI attributes before
enables some BITs in Start(), and restore to original value
in Stop().

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
3 years agoEmbeddedPkg: Implement NorFlashInfoLib
Marcin Wojtas [Fri, 3 Nov 2017 17:55:17 +0000 (18:55 +0100)]
EmbeddedPkg: Implement NorFlashInfoLib

The SPI NOR flash drivers which base on ArmPlatformPkg's
NorFlashDxe usually make use of static declarations of the
flash instances with their type and parameters. As a result
it implies hardcoding the exact way of flash handling, not to
mention the code does not look very nice. Much better solution
would be obtaining the flash ID and hence its description
in runtime.

JEDEC compliant SPI NOR devices allow to obtain their IDs with
READ_ID command (0x9f), which should return the vendor ID byte,
followed by 2 to 4 following device ID bytes. Use this capability
for implementing a NorFlashInfoLib that gives an access to the
NOR flash description data, such as name, page size, sector
(block) size and others, of more than 50 different models.
The new library user should pass an output array from issuing
READ_ID command to the NorFlashGetInfo () routine - if the
match is found, an allocated (optionally for RT) pool with
the flash description copy will be returned.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoSecurityPkg/AuthVariableLib: Use EFI_CERT_DATA to parse certificate
chenc2 [Tue, 7 Nov 2017 01:01:26 +0000 (09:01 +0800)]
SecurityPkg/AuthVariableLib: Use EFI_CERT_DATA to parse certificate

The function Pkcs7GetSigners return certificate stack as binary buffer.
Use EFI_CERT_DATA to parsing certificate stack more clearly, and access
certificate by the field of EFI_CERT_DATA structure.

Cc: Long Qin <qin.long@intel.com>
Cc: Zhang Chao <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Zhang Chao <chao.b.zhang@intel.com>
3 years agoCryptoPkg/BaseCryptLib: Add C-structure to matching certificate stack
chenc2 [Tue, 7 Nov 2017 00:56:56 +0000 (08:56 +0800)]
CryptoPkg/BaseCryptLib: Add C-structure to matching certificate stack

The parameter CertStack of Pkcs7GetSigners will return all embedded X.509
certificate in one given PKCS7 signature. The format is:
//
// UINT8  CertNumber;
// UINT32 Cert1Length;
// UINT8  Cert1[];
// UINT32 Cert2Length;
// UINT8  Cert2[];
// ...
// UINT32 CertnLength;
// UINT8  Certn[];
//
Add EFI_CERT_STACK and EFI_CERT_DATA structure, these two C-structure are
used for parsing CertStack more clearly.

Cc: Long Qin <qin.long@intel.com>
Cc: Zhang Chao <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: chenc2 <chen.a.chen@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Zhang Chao <chao.b.zhang@intel.com>
3 years agoArmPkg/ArmMmuLib: Add new attribute WRITE_BACK_NONSHAREABLE
Peicong Li [Tue, 7 Nov 2017 12:56:51 +0000 (20:56 +0800)]
ArmPkg/ArmMmuLib: Add new attribute WRITE_BACK_NONSHAREABLE

Flash region needs to be set as cacheable (write back) to increase
performance, if PEI is still XIP on flash or DXE FV is decompressed
from flash FV. However some ARM platforms do not support to set flash
as inner shareable since flash is not normal DDR memory and it will
not respond to cache snoop request, which will causes system hang
after MMU is enabled.

So we need a new ARM memory region attribute WRITE_BACK_NONSHAREABLE
for flash region on these platforms specifically. This attribute will
set the region as write back but not inner shared.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Peicong Li <lipeicong@huawei.com>
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoMdeModulePkg/PciBus: Disable BME of all devices when entering RT
Ruiyu Ni [Tue, 31 Oct 2017 07:53:18 +0000 (15:53 +0800)]
MdeModulePkg/PciBus: Disable BME of all devices when entering RT

The patch ensures all DMA transactions are blocked after
ExitBootService.
If a platform enables IOMMU before and needs disable IOMMU after
ExitBootService, the IOMMU should be disabled after PCI bus driver
disables BME.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Turner <michael.turner@microsoft.com>
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
3 years agoShellPkg/HexEdit: Fix EBC build failure
Ruiyu Ni [Fri, 3 Nov 2017 08:55:43 +0000 (16:55 +0800)]
ShellPkg/HexEdit: Fix EBC build failure

EfiCpuIoWidthUint8 should be used in HMemImageRead and HMemImageSave.
Because CpuIo protocol is now used for memory access.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
3 years agoMdeModulePkg/VarCheckHii: Enhance VarCheckHiiLib to support bit check
Dandan Bi [Fri, 3 Nov 2017 08:34:25 +0000 (16:34 +0800)]
MdeModulePkg/VarCheckHii: Enhance VarCheckHiiLib to support bit check

V3:
(1) Reset QuestionStoredInBitField to FALSE at end opcode(EFI_IFR_END_OP)
(2) Fix typo and format issues(line alignment for debug print message
and value assignment...)

V2:
(1)Remove the VarOffsetBitLevel/StorageWidthBitLevel to reduce the final
VarCheckBinSize and update the implementation accordingly.
(2)Update the VAR_CHECK_HII_REVISION
(3)Refine the Debug message and function comments,like update oneof",
"checkbox", "numeric" to "OneOf", "CheckBox", "Numeric".

VarCheckHiiLib check the value set to storage based on the possible value
listed in the vfr file. Since we have enhanced vfr to support Question
value stored in bit field, so now enhance VarCheckHiiLib to support bit
field check.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoMdeModulePkg/VarCheckHiiLib: Replace EFI_D_INFO with DEBUG_INFO
Dandan Bi [Fri, 3 Nov 2017 06:14:02 +0000 (14:14 +0800)]
MdeModulePkg/VarCheckHiiLib: Replace EFI_D_INFO with DEBUG_INFO

In patch 2, we will introduce DEBUG_INFO in VarCheckHiiLib,in order to keep
consistence, replace all EFI_D_INFO with DEBUG_INFO firstly in this pacth.

Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoMdeModulePkg VarCheckHiiLib: Fix typo "0x02%x" to be "0x%02x"
Star Zeng [Mon, 6 Nov 2017 07:15:55 +0000 (15:15 +0800)]
MdeModulePkg VarCheckHiiLib: Fix typo "0x02%x" to be "0x%02x"

Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
3 years agoMdeModulePkg/SdMmcPciHcDxe: call SdMmcFreeTrb() to complete sync operation
Ard Biesheuvel [Sat, 4 Nov 2017 21:32:37 +0000 (21:32 +0000)]
MdeModulePkg/SdMmcPciHcDxe: call SdMmcFreeTrb() to complete sync operation

Currently, we complete a synchronous operation without unmapping the
DMA mappings, and free the pages using FreePages () rather than calling
EFI_PCI_IO_PROTOCOL::FreeBuffer. This is simply incorrect, but it also
breaks non-coherent DMA as well as DMA protection and/or memory encryption
so let's do it correctly and call SdMmcFreeTrb() instead.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoCryptoPkg/BaseCryptLib: Fix mismatched memory allocation/free
Long Qin [Tue, 31 Oct 2017 07:50:30 +0000 (15:50 +0800)]
CryptoPkg/BaseCryptLib: Fix mismatched memory allocation/free

The malloc/free (instead of AllocatePool/FreePool) were used directly
in some wrapper implementations, which was designed to leverage the
light-weight memory management routines at Runtime phase.
The malloc/free and AllocatePool/FreePool usages are required to be
matched, after extra memory size info header was introduced in malloc
wrapper.

This patch corrects two memory allocation cases, which requires the
caller to free the buffer with FreePool() outside the function call.

And some comments were also added to clarify the correct memory
release functions if it's the caller's responsibility to free the
memory buffer.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
3 years agoCryptoPkg/BaseCryptLib: Fix buffer overflow issue in realloc wrapper
Long Qin [Wed, 1 Nov 2017 08:10:04 +0000 (16:10 +0800)]
CryptoPkg/BaseCryptLib: Fix buffer overflow issue in realloc wrapper

There is one long-standing problem in CRT realloc wrapper, which will
cause the obvious buffer overflow issue when re-allocating one bigger
memory block:
    void *realloc (void *ptr, size_t size)
    {
      //
      // BUG: hardcode OldSize == size! We have no any knowledge about
      // memory size of original pointer ptr.
      //
      return ReallocatePool ((UINTN) size, (UINTN) size, ptr);
    }
This patch introduces one extra header to record the memory buffer size
information when allocating memory block from malloc routine, and re-wrap
the realloc() and free() routines to remove this BUG.

Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ting Ye <ting.ye@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Qin Long <qin.long@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Validated-by: Jian J Wang <jian.j.wang@intel.com>
3 years agoIntelSiliconPkg IntelVTdDxe: Use ACPI table event to get DMAR table
Star Zeng [Wed, 25 Oct 2017 09:23:03 +0000 (17:23 +0800)]
IntelSiliconPkg IntelVTdDxe: Use ACPI table event to get DMAR table

Use ACPI table event to get DMAR table instead of using ACPI SDT
notification as ACPI SDT is optional and the default value of
PcdInstallAcpiSdtProtocol is FALSE in MdeModulePkg.dec.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
3 years agoArmPlatformPkg/PlatformPeim: allow PlatformPeiLib to set the boot mode
Ard Biesheuvel [Wed, 1 Nov 2017 12:57:26 +0000 (12:57 +0000)]
ArmPlatformPkg/PlatformPeim: allow PlatformPeiLib to set the boot mode

The current interdepencies between the PrePeiCore SEC module, the
platform PEIM and ArmPlatformLib is a bit awkward: due to the fact
that ArmPlatformLib is also used by SEC modules, we cannot use PEI
specific facilities in the implementation of ArmPlatformGetBootMode.
However, given that we call that library function /after/ invoking
PlatformPeiLib, there is no way for that library to set the boot mode
other than resorting to tricks like notification callbacks on arbitrary
unrelated events.

ArmPlatformLib should probably be phased out anyway, given its quirky
nature, but for now, let's fix this particular issue by deferring the
call to PlatformPeim() to after the point where we set the boot mode
by calling ArmPlatformGetBootMode ().

While we're at it, clean up the code slightly by using PeiServicesLib
instead of doing double pointer dereferencing.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoEmbeddedPkg: introduce GPIO PPI
Ard Biesheuvel [Wed, 1 Nov 2017 12:54:39 +0000 (12:54 +0000)]
EmbeddedPkg: introduce GPIO PPI

Introduce a PPI counterpart of the existing 'embedded GPIO' protocol,
so we can manipulate GPIOs from PEI modules. This allows things like
setting the boot mode based on a DIP switch setting.

Note that the naming is slightly awkward, as there is nothing 'embedded'
about a GPIO, but given that the DXE protocol already resides here and
has the 'embedded' prefix, it makes sense to retain uniformity.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoNt32Pkg: Update SecMain consumes PCD to get the init value in temp stack
Liming Gao [Thu, 2 Nov 2017 02:59:15 +0000 (10:59 +0800)]
Nt32Pkg: Update SecMain consumes PCD to get the init value in temp stack

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoMdeModulePkg: Update PeiCore consumes PCD to get the init value in temp stack
Liming Gao [Thu, 2 Nov 2017 02:59:14 +0000 (10:59 +0800)]
MdeModulePkg: Update PeiCore consumes PCD to get the init value in temp stack

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoMdeModulePkg: Add new PCD PcdInitValueInTempStack
Liming Gao [Thu, 2 Nov 2017 02:59:13 +0000 (10:59 +0800)]
MdeModulePkg: Add new PCD PcdInitValueInTempStack

https://bugzilla.tianocore.org/show_bug.cgi?id=740

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
3 years agoBaseTools: parse map file generated by Xcode on Mac
Yonghong Zhu [Thu, 2 Nov 2017 05:15:34 +0000 (13:15 +0800)]
BaseTools: parse map file generated by Xcode on Mac

Add support to parse map file generated by Xcode on Mac to get
variable offset and Patchable Pcd info in current EFI file.

Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoBaseTools/VfrCompile: Add check to avoid using NULL pointer
Dandan Bi [Wed, 1 Nov 2017 08:11:47 +0000 (16:11 +0800)]
BaseTools/VfrCompile: Add check to avoid using NULL pointer

Question value are stored in one specified storage, but the Data type
of the storage is not specified or there is no sub fields in the Data
type sometimes, so we need to add check before using related pointers.
Here list some NULL cases:
(1)For an efivastore which doesn't specify a data structure or a
   data type(UINT8,UINT16...)as the storage, just has VarName and
   VarSize instead, we can not get its data type before parsing
   its VarSize.

(2)For efivastore which just specifies the data type(UINT8,UINT16...)
   not a structure as the storage,this data type doesn't have sub-fields.

Cc: Eric Dong <eric.dong@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoAdd one maintainer to CorebootModulePkg and CorebootPayloadPkg
Benjamin You [Tue, 31 Oct 2017 05:41:50 +0000 (13:41 +0800)]
Add one maintainer to CorebootModulePkg and CorebootPayloadPkg

Add one maintainer (Benjamin You) to CorebootModulePkg and CorebootPayloadPkg

Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Prince Agyeman <prince.agyeman@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Benjamin You <benjamin.you@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
3 years agoUefiCpuPkg/MpInitLib:Make function comments align with function
Dandan Bi [Wed, 1 Nov 2017 01:36:53 +0000 (09:36 +0800)]
UefiCpuPkg/MpInitLib:Make function comments align with function

Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
3 years agoShellPkg/hexeditor: Use CpuIo for memory access
Ruiyu Ni [Wed, 1 Nov 2017 10:12:53 +0000 (18:12 +0800)]
ShellPkg/hexeditor: Use CpuIo for memory access

The original code uses PciRootBridgeIo for memory access.
It worked before MdeModulePkg/PciHostBridgeDxe driver was checked in.
But MdeModulePkg/PciHostBridgeDxe adds checks to ensure the MMIO
access request is in the scope of the current RootBridgeIo instance.
It causes "hexeditor -m 0 2" reports error because memory address 0
surely is not in the scope of any RootBridgeIo instance.
In fact only accessing the MMIO space occupied by the RootBridgeIo
can work.

The patch changes hexeditor to use CpuIo for memory access.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
3 years agoBaseTools/tools_def AARCH64 ARM: disable PIE linking for .aslc sources
Ard Biesheuvel [Wed, 1 Nov 2017 14:58:42 +0000 (14:58 +0000)]
BaseTools/tools_def AARCH64 ARM: disable PIE linking for .aslc sources

Commit 1894a7c64c0a ("BaseTools/tools_def AARCH64 ARM: disable PIE
linking") works around an issue that was caught due to the fact that
PIE linking produces broken .acpi files. However, v2 of that fix
inadvertently only applied the workaround to the normal linker command
line, and not to the ASLD one, so the issue still persists.

So add the missing -no-pie options for ASLD on ARM and AARCH64.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoMdeModulePkg: Deprecate EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
Zhang, Chao B [Tue, 24 Oct 2017 07:04:00 +0000 (15:04 +0800)]
MdeModulePkg: Deprecate EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS

Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated.
1. Make SetVariable/QueryVariableInfo return EFI_UNSUPPORTED with this
   attribute
2. No change to GetVariable/GetNextVariableName
Also update several function descriptors accordingly

Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
3 years agoMdePkg: Deprecate EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
Zhang, Chao B [Tue, 24 Oct 2017 06:53:52 +0000 (14:53 +0800)]
MdePkg: Deprecate EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS

Mark EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS as deprecated. Also update
some function descriptors accordingly.

Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
3 years agoSecurityPkg: Remove Counter Based AuthVariable support
Zhang, Chao B [Tue, 24 Oct 2017 06:52:10 +0000 (14:52 +0800)]
SecurityPkg: Remove Counter Based AuthVariable support

Remove counter based auth variable support. also modify several function
descriptors to accommodate the change

Cc: Long Qin <qin.long@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
3 years agoMdeModulePkg/PciBus: Fix bug that doesn't produce BusOverride
Ruiyu Ni [Mon, 23 Oct 2017 05:52:15 +0000 (13:52 +0800)]
MdeModulePkg/PciBus: Fix bug that doesn't produce BusOverride

It's a regression of below commit:
SHA-1: 8be37a5cee700777ca8e8e8a34cc2225b21931a7
* MdeModulePkg/SecurityStubDxe: Defer 3rd party image before EndOfDxe

When PciBus driver fails to load the Option ROM, it doesn't produce
BusOverride protocol. It was a correct behavior before the above
commit. But due to the above commit, BusOverride protocol never is
produced by PciBus driver.

The patch fixes this issue using the following solution:
1. PciBus records the image device path when LoadImage fails.
2. Override.GetDriver() tries to look for the image handle using
   the stored image device path.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoMdeModulePkg/PciBus: Don't create entry when recording ImageHandle
Ruiyu Ni [Fri, 27 Oct 2017 03:37:18 +0000 (11:37 +0800)]
MdeModulePkg/PciBus: Don't create entry when recording ImageHandle

The patch shouldn't impact functionality.

Original code records the ImageHandle of Option ROM by creating a
new entry. It's not necessary.
The patch updates the ImageHandle in the old entry.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoMdeModulePkg/PciBus: Refine EFI_PCI_ROM_IMAGE_MAPPING
Ruiyu Ni [Thu, 26 Oct 2017 07:54:30 +0000 (15:54 +0800)]
MdeModulePkg/PciBus: Refine EFI_PCI_ROM_IMAGE_MAPPING

The patch doesn't impact real functionality.
It only renames EFI_PCI_ROM_IMAGE_MAPPING to PCI_ROM_IMAGE,
and changes prototype of PciRomAddImageMapping so that
no explicit type cast is needed when calling this function.

It also removes unused field RomBase from PCI_IO_DEVICE structure.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoIntelSiliconPkg/VtdPeiSample: Add premem support.
Jiewen Yao [Thu, 21 Sep 2017 07:07:50 +0000 (15:07 +0800)]
IntelSiliconPkg/VtdPeiSample: Add premem support.

Before memory is ready, this sample produces one VTd engine.
After memory and silicon is initialized, this sample produces
both IGD VTd engine and all-rest VTd engine by reinstall the
FV_INFO_PPI.

This update is to demonstrate how to support pre-mem VTd usage.

Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoIntelSiliconPkg/VtdPmrPei: Add premem support.
Jiewen Yao [Sat, 23 Sep 2017 08:27:50 +0000 (16:27 +0800)]
IntelSiliconPkg/VtdPmrPei: Add premem support.

Remove memory discovered dependency to support both premem
VTD_INFO_PPI and postmem VTD_INFO_PPI.

If VTD_INFO_PPI is installed before memory is ready, this
driver protects all memory region.
If VTD_INFO_PPI is installed or reinstalled after memory
is ready, this driver allocates DMA buffer and protect rest.

Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
3 years agoIntelSiliconPkg/VTdDxe: return unsupported for exceptionlist
Jiewen Yao [Thu, 26 Oct 2017 02:04:06 +0000 (10:04 +0800)]
IntelSiliconPkg/VTdDxe: return unsupported for exceptionlist

Since the exception list is not a recommended way, we returns
EFI_UNSUPPORTED in the sample code.

Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoIntelSiliconPkg/VTdDxe: Change EBS Event TPL to CALLBACK.
Jiewen Yao [Thu, 26 Oct 2017 01:43:53 +0000 (09:43 +0800)]
IntelSiliconPkg/VTdDxe: Change EBS Event TPL to CALLBACK.

Change ExitBootServices TPL to CALLBACK, so that a device
can disable BME before IOMMU grants access right.

Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoNetworkPkg/IScsiDxe: Add check to avoid use NULL pointer
Jiaxin Wu [Fri, 27 Oct 2017 02:17:08 +0000 (10:17 +0800)]
NetworkPkg/IScsiDxe: Add check to avoid use NULL pointer

Cc: Wu Hao A <hao.a.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
3 years agoNetworkPkg/HttpBootDxe: Add check to avoid use NULL pointer
Jiaxin Wu [Fri, 27 Oct 2017 02:16:29 +0000 (10:16 +0800)]
NetworkPkg/HttpBootDxe: Add check to avoid use NULL pointer

Cc: Wu Hao A <hao.a.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
3 years agoMdeModulePkg/AtaAtapiPassThru: disable only BM-DMA at ExitBootServices()
Laszlo Ersek [Thu, 26 Oct 2017 13:48:31 +0000 (15:48 +0200)]
MdeModulePkg/AtaAtapiPassThru: disable only BM-DMA at ExitBootServices()

Clearing I/O port decoding in the PCI command register at
ExitBootServices() breaks IDE boot in Windows, on QEMU's "pc" (i440fx)
machine type. (AHCI boot on "q35" is unaffected.) Windows seems repeatedly
stuck, apparently waiting for a timeout of sorts.

This is arguably a Windows bug; a native OS driver should not expect the
firmware to leave the PCI command register in any particular state.

Strictly speaking, we only need to disable BM-DMA at ExitBootServices(),
in order to abort pending transfers to/from RAM, which is soon to be owned
by the OS. BM-DMA is also the only bit that's explicitly named by the UEFI
Driver Writers' Guide, for clearing at ExitBootServices().

I've verified that clearing only BM-DMA fixes the issue (boot time) on
i440fx, and does not regress q35/AHCI.

Cc: Aleksei Kovura <alex3kov@zoho.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dann Frazier <dannf@ubuntu.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Reported-by: Aleksei Kovura <alex3kov@zoho.com>
Reported-by: Dann Frazier <dannf@ubuntu.com>
Reported-by: https://launchpad.net/~cjkrupp
Bisected-by: Dann Frazier <dannf@ubuntu.com>
Bisected-by: https://launchpad.net/~cjkrupp
Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Star Zeng <star.zeng@intel.com>
Ref: https://bugs.launchpad.net/ubuntu/+source/edk2/+bug/1725560
Fixes: 6fb8ddd36bde45614b0a069528cdc97077835a74
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Tested-by: Aleksei Kovura <alex3kov@zoho.com>
3 years agoDrivers/SataSiI3132Dxe: Allow 64-bit DMA transfer
Daniil Egranov [Fri, 27 Oct 2017 05:33:24 +0000 (00:33 -0500)]
Drivers/SataSiI3132Dxe: Allow 64-bit DMA transfer

Set a PCI IO attribute allowing 64-bit DMA transfer.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
3 years agoDrivers/SataSiI3132Dxe: Fixed PCI IO read and write operations
Daniil Egranov [Fri, 27 Oct 2017 05:33:23 +0000 (00:33 -0500)]
Drivers/SataSiI3132Dxe: Fixed PCI IO read and write operations

The ATA pass through read should use PCI IO bus master write operation
and ATA pass through write should use PCI IO bus master read operation
as the read and write operations are executed from the bus master's
point of view.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
3 years agoBaseTools/tools_def: suppress GCC predefined macros in DTB compilation
Ard Biesheuvel [Thu, 26 Oct 2017 10:06:48 +0000 (11:06 +0100)]
BaseTools/tools_def: suppress GCC predefined macros in DTB compilation

The standard GCC preprocessor we use to preprocess device tree source
files has a whole bunch of macros predefined, among which

  #define __linux 1
  #define __linux__ 1
  #define __gnu_linux__ 1
  #define linux 1

This causes a property like 'linux,code' to be converted into '1,code'
which is obviously wrong. So let's get rid of all the predefined macros
by passing -undef to the preprocessor command line.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoBaseTools/tools_def AARCH64 ARM: disable PIE linking
Ard Biesheuvel [Wed, 25 Oct 2017 09:52:17 +0000 (10:52 +0100)]
BaseTools/tools_def AARCH64 ARM: disable PIE linking

Some prebuilt GCC toolchains targeting aarch64 (e.g., the Debian Stretch
one) will default to building PIE executables. This has been observed to
corrupt ACPI tables built from .aslc sources, so disable PIE linking
altogether when using the GCC toolchain to build for AARCH64 or ARM.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
3 years agoNetworkPkg/IScsiDxe: Clear the old IFR TargetIp to avoid sharing it with other attempts.
Jiaxin Wu [Tue, 24 Oct 2017 03:20:44 +0000 (11:20 +0800)]
NetworkPkg/IScsiDxe: Clear the old IFR TargetIp to avoid sharing it with other attempts.

Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Tested-by: Karunakar P <karunakarp@amiindia.co.in>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
3 years agoUefiCpuPkg/MpInitLib: Keep compatible with former AP counting solution.
Eric Dong [Thu, 26 Oct 2017 05:55:21 +0000 (13:55 +0800)]
UefiCpuPkg/MpInitLib: Keep compatible with former AP counting solution.

For some special platforms (such as Ovmf), it is possible
that, some APs start up *and finish* before the remaining
APs start up *at all*. In this case, the enhance
solution by changes 0594ec41 not works as expected.

This change remove check CpuMpData->CpuCount logic to let old
solution still workable if platform owner still set a long
time for PcdCpuApInitTimeOutInMicroSeconds. It's platform
owner's response to decide which solution to use.

Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
3 years agoUefiCpuPkg/CpuFeatures: Export HOB if CPU initialized in PEI
Eric Dong [Thu, 26 Oct 2017 02:28:23 +0000 (10:28 +0800)]
UefiCpuPkg/CpuFeatures: Export HOB if CPU initialized in PEI

In current implementation, CPU initialized can be done in PEI
or DXE phase. PEI uses CpuFeaturesPei and Dxe uses CpuFeaturesDxe.
If CPU initialized in PEI phase, CpuFeaturesDxe driver will
not be used. This driver will install gEdkiiCpuFeaturesInitDoneGuid
protocol after it initializes the CPU.

Some drivers depend on this protocol to dispatch themselves. If
CpuFeaturesDxe not been used, these drivers will not be dispatched.

This patch fix the above issue. If Cpu initialized in PEI
phase, it also report a guid HOB for CpuFeaturesDxe.
CpuFeaturesDxe will check this HOB first. If it found this
HOB, it just install gEdkiiCpuFeaturesInitDoneGuid protocol,
else it will also do the CPU initialization.

Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
3 years agoMaintainers.txt: add Laszlo Ersek as UefiCpuPkg reviewer
Laszlo Ersek [Tue, 24 Oct 2017 10:20:57 +0000 (12:20 +0200)]
Maintainers.txt: add Laszlo Ersek as UefiCpuPkg reviewer

UefiCpuPkg hosts a number of modules (SMM infrastructure,
MP-initialization) that may behave differently enough between
virtualization guests and physical boards that they merit regression
testing and review specifically from a virtualization perspective.

Add Laszlo as a UefiCpuPkg reviewer (not maintainer) so that he be CC'd on
all UefiCpuPkg patches.

> R: Package Reviewer: Cc address for patches and questions. Reviewers
>    help maintainers review code, but don't have push access.

Cc: Andrew Fish <afish@apple.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jeff Fan <vanjeff_919@hotmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoIntelSiliconPkg IntelVTdDxe: use gEfiAcpi10TableGuid for ACPI 1.0
Star Zeng [Wed, 25 Oct 2017 08:55:46 +0000 (16:55 +0800)]
IntelSiliconPkg IntelVTdDxe: use gEfiAcpi10TableGuid for ACPI 1.0

According to definition (Acpi.h and MdePkg.dec),
gEfiAcpiTableGuid = gEfiAcpi20TableGuid, and the code is trying
to parse ACPI 2.0 first and then ACPI 1.0, but it uses
gEfiAcpiTableGuid wrongly for ACPI 1.0, this patch is to fix it.

Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
3 years agoMdeModulePkg/Ip4Dxe: Trigger Ip4Config2 to retrieve the default address.
Jiaxin Wu [Fri, 20 Oct 2017 06:46:31 +0000 (14:46 +0800)]
MdeModulePkg/Ip4Dxe: Trigger Ip4Config2 to retrieve the default address.

According the UEFI spec 2.7 A:
In section 28.3.2 for the IpConfigData.UseDefaultAddress, "While set to
TRUE, Configure() will trigger the EFI_IP4_CONFIG2_PROTOCOL to retrieve
the default IPv4 address if it is not available yet."
In section 28.5 for the Ip4Config2PolicyDhcp, "...All of these configurations
are retrieved from DHCP server or other auto-configuration mechanism."

This patch is to align with the above description. When the default IPv4
address is not available and IpConfigData.UseDefaultAddress is set to TRUE,
Ip4Config2 protocol will be called to retrieve the default address by setting
the policy to Ip4Config2PolicyDhcp.

Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
3 years agoNetworkPkg/TlsAuthConfigDxe: Remove the extra FreePool
Jiaxin Wu [Thu, 19 Oct 2017 05:56:25 +0000 (13:56 +0800)]
NetworkPkg/TlsAuthConfigDxe: Remove the extra FreePool

Cc: Long Qin <qin.long@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Ye Ting <ting.ye@intel.com>
Reviewed-by: Long Qin <qin.long@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
3 years agoNetworkPkg/IScsiDxe: Add IPv6 support condition check.
Jiaxin Wu [Tue, 17 Oct 2017 01:48:37 +0000 (09:48 +0800)]
NetworkPkg/IScsiDxe: Add IPv6 support condition check.

Base on the request of https://bugzilla.tianocore.org/show_bug.cgi?id=710,
we provide this patch to IPv6 condition check by leveraging AIP Protocol.

Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
3 years agoNetworkPkg/HttpBootDxe: Add IPv6 support condition check.
Jiaxin Wu [Tue, 17 Oct 2017 01:47:00 +0000 (09:47 +0800)]
NetworkPkg/HttpBootDxe: Add IPv6 support condition check.

v2:
* Fix the potential ASSERT issue.

Base on the request of https://bugzilla.tianocore.org/show_bug.cgi?id=710,
we provide this patch to IPv6 condition check by leveraging AIP Protocol.

Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Karunakar P <karunakarp@amiindia.co.in>
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
3 years agoNetworkPkg/IScsiDxe: Display InitiatorInfo in attempt page even DHCP enabled.
Jiaxin Wu [Mon, 9 Oct 2017 03:34:08 +0000 (11:34 +0800)]
NetworkPkg/IScsiDxe: Display InitiatorInfo in attempt page even DHCP enabled.

Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
3 years agoNetworkPkg/IScsiDxe: Clean the previous ConfigData when switching the IP mode.
Jiaxin Wu [Wed, 18 Oct 2017 04:58:15 +0000 (12:58 +0800)]
NetworkPkg/IScsiDxe: Clean the previous ConfigData when switching the IP mode.

Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
3 years agoNetworkPkg/IScsiDxe: Fix the incorrect/needless DHCP process.
Jiaxin Wu [Mon, 16 Oct 2017 06:53:09 +0000 (14:53 +0800)]
NetworkPkg/IScsiDxe: Fix the incorrect/needless DHCP process.

The existing attempt should not trigger the DHCP process if it
doesn't associates with the current NIC. That's incorrect when
displaying the initiator info in attempt page.

Cc: Karunakar P <karunakarp@amiindia.co.in>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Karunakar p <karunakarp@amiindia.co.in>
3 years agoShellpkg/editor: Fix a bug that may modifies Line[-1]
Ruiyu Ni [Wed, 25 Oct 2017 01:01:27 +0000 (09:01 +0800)]
Shellpkg/editor: Fix a bug that may modifies Line[-1]

The original code as below intend to set the character
before last column to CHAR_NULL.
  Line[(LastCol % (ARRAY_SIZE (Line) - 1)) - 1] = CHAR_NULL;

But when LastCol % (ARRAY_SIZE (Line) - 1)) equals to 0,
Line[-1] is modified.

We should change to code as below:
  Line[(LastCol - 1) % (ARRAY_SIZE (Line) - 1)] = CHAR_NULL;

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
3 years agoMdeModulePkg/Variable/RuntimeDxe: delete & lock MOR in the absence of SMM
Laszlo Ersek [Tue, 10 Oct 2017 11:44:16 +0000 (13:44 +0200)]
MdeModulePkg/Variable/RuntimeDxe: delete & lock MOR in the absence of SMM

VariableRuntimeDxe deletes and locks the MorLock variable in
MorLockInit(), with the argument that any protection provided by MorLock
can be circumvented if MorLock can be overwritten by unprivileged code
(i.e., outside of SMM).

Extend the argument and the logic to the MOR variable, which is supposed
to be protected by MorLock. Pass Attributes=0 when deleting MorLock and
MOR both.

This change was suggested by Star; it is inspired by earlier VariableSmm
commit fda8f631edbb ("MdeModulePkg/Variable/RuntimeDxe: delete and lock
OS-created MOR variable", 2017-10-03).

Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Suggested-by: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
3 years agoShellPkg/HandleParsingLib: Remove unnecessary CatSPrint call
Ruiyu Ni [Thu, 19 Oct 2017 03:20:35 +0000 (11:20 +0800)]
ShellPkg/HandleParsingLib: Remove unnecessary CatSPrint call

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
3 years agoUefiCpuPkg/MpInitLib: Enhance waiting for AP initialization logic.
Eric Dong [Mon, 23 Oct 2017 07:02:36 +0000 (15:02 +0800)]
UefiCpuPkg/MpInitLib: Enhance waiting for AP initialization logic.

Current logic always waiting for a specific value to collect all APs
count. This logic may caused some platforms cost too much time to
wait for time out.
This patch add new logic to collect APs count. It adds new variable
NumApsExecuting to detect whether all APs have finished initialization.
Each AP let NumApsExecuting++ when begin to initialize itself and let
NumApsExecuting-- when it finish the initialization. BSP base on whether
NumApsExecuting == 0  to finished the collect AP process.

Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
3 years agoUefiCpuPkg/MpInitLib: Change AP Index variable name.
Eric Dong [Mon, 23 Oct 2017 06:45:44 +0000 (14:45 +0800)]
UefiCpuPkg/MpInitLib: Change AP Index variable name.

Original AP index variable name not well express the meaning
of the variable. Also this name is better used in later patch.
So change the variable name for better understanding.

Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jeff Fan <vanjeff_919@hotmail.com>
3 years agoCryptoPkg/BaseCryptLib: remove some duplicate initializations.
Peter Jones [Fri, 20 Oct 2017 15:10:18 +0000 (23:10 +0800)]
CryptoPkg/BaseCryptLib: remove some duplicate initializations.

clang-analyzer noticed this:

Pk/CryptPkcs7Verify.c:600:5: warning: Value stored to 'OldSize' is never read
    OldSize    = BufferSize;
    ^            ~~~~~~~~~~
Pk/CryptPkcs7Verify.c:644:5: warning: Value stored to 'OldSize' is never read
    OldSize    = BufferSize;
    ^            ~~~~~~~~~~
2 warnings generated.

These are each immediately followed by a loop that initializes them (to
the same values) a second time, and are otherwise only referenced inside
that loop, so there's just no point to these assignments at all.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Peter Jones <pjones@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Long Qin <qin.long@intel.com>
3 years agoTFTP : tftp fix for full volume case
Meenakshi Aggarwal [Mon, 25 Sep 2017 14:35:11 +0000 (20:05 +0530)]
TFTP : tftp fix for full volume case

Issue :
When storage media is full, tftp was resulting in ASSERT
MdeModulePkg/Core/Dxe/Mem/Page.c, because number of pages
was zero.

Reason:
While doing tftp, function call ShellWriteFile was modifying
FileSize variable. In case of full disk it was coming out to be
Zero.

Fix:
Storage the original filesize in local variable, and use this
variable while freeing the pages.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
3 years agoIntelSiliconPkg/VtdInfoSample: Fix IGD RMRR memory.
Jiewen Yao [Fri, 20 Oct 2017 08:47:48 +0000 (16:47 +0800)]
IntelSiliconPkg/VtdInfoSample: Fix IGD RMRR memory.

Fix a calculation problem in IGD RMRR memory.

Cc: Zeng Star <zeng.star@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Zeng Star <zeng.star@intel.com>
3 years agoUefiCpuPkg/MtrrLib: Make comments align with function
Dandan Bi [Thu, 19 Oct 2017 07:48:56 +0000 (15:48 +0800)]
UefiCpuPkg/MtrrLib: Make comments align with function

Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
3 years agoMdeModulePkg/DxeIplPeim: Refine coding style in function comments
Dandan Bi [Thu, 19 Oct 2017 07:42:27 +0000 (15:42 +0800)]
MdeModulePkg/DxeIplPeim: Refine coding style in function comments

Make the comments align with the function.
And add some missing function comments.

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
3 years agoIntelFrameworkModule/LegacyBios: Avoid explicit comparison for BOOLEAN
Dandan Bi [Thu, 19 Oct 2017 07:34:53 +0000 (15:34 +0800)]
IntelFrameworkModule/LegacyBios: Avoid explicit comparison for BOOLEAN

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
3 years agoIntelFrameworkModulePkg/Csm: Refine coding style in comments
Dandan Bi [Thu, 19 Oct 2017 07:30:23 +0000 (15:30 +0800)]
IntelFrameworkModulePkg/Csm: Refine coding style in comments

Make the comments follow Edk2 coding style:
1. Make the comments starts with /** and end with **/.
2. Make the comments descrition end with '.'

Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
3 years agoEmbeddedPkg: add driver to set graphical/serial console preference
Ard Biesheuvel [Fri, 20 Oct 2017 13:30:11 +0000 (14:30 +0100)]
EmbeddedPkg: add driver to set graphical/serial console preference

Linux on ARM/arm64 will infer from the presence of a /chosen/stdout-path
DT property or of a SPCR ACPI table that the primary console is the serial
port, even if a graphical console is available as well.

So let's introduce a driver that allows the user to set a preference
between graphical and serial if both are available. If the preference
is set to 'Graphical', and any GOP protocol instances have been installed
by the time the ReadyToBoot event is signalled, remove the DT property
and/or the SPCR table entirely.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
3 years agoMdeModulePkg/PciBus: Fix bug that PCI BUS claims too much resource
Ruiyu Ni [Fri, 20 Oct 2017 09:55:01 +0000 (17:55 +0800)]
MdeModulePkg/PciBus: Fix bug that PCI BUS claims too much resource

The bug was caused by 728d74973c9262b6c7b7ef4be213223d55affec3
"MdeModulePkg/PciBus: Count multiple hotplug resource paddings".

The patch firstly updated the Bridge->Alignment to the maximum
alignment of all devices under the bridge, then aligned the
Bridge->Length to Bridge->Alignment.
It caused too much resources were claimed.

The new patch firstly aligns Bridge->Length to Bridge->Alignment,
then updates the Bridge->Alignment to the maximum alignment of all
devices under the bridge.
Because the step to update the Bridge->Alignment is to make sure
the resource allocated to the bus under the Bridge meets all
devices alignment. But the Bridge->Length doesn't have to align
to the maximum alignment.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
3 years agoUefiCpuPkg/MtrrLib: Use SetMem instead of SetMem64 to fix hang
Ruiyu Ni [Mon, 23 Oct 2017 05:11:40 +0000 (13:11 +0800)]
UefiCpuPkg/MtrrLib: Use SetMem instead of SetMem64 to fix hang

ClearMasks and OrMasks are not 8-byte aligned.
But SetMem64 requires the input address is 8-byte aligned.
If the input is not 8-byte aligned, assertion is hit.
Use SetMem instead.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>