Scott Duplichan [Fri, 14 Nov 2014 10:23:55 +0000 (10:23 +0000)]
OvmfPkg: QemuVideoDxe: the VBE shim needs no 64-bit shifts (VS2010)
The SegmentC local variable has type EFI_PHYSICAL_ADDRESS for (justified)
style reasons. However, the 64-bit bit-shifts that it undergoes result in
intrinsic calls when built with VS2010 for Ia32 / NOOPT.
The concrete value of SegmentC, 0xC0000, and the results of the bitops
that are based on it, are statically computeable. Cast SegmentC to UINT32
before subjecting it to bitwise operations; we can see in advance that
this won't lead to range loss.
Scott Duplichan [Fri, 14 Nov 2014 10:23:43 +0000 (10:23 +0000)]
OvmfPkg: flash driver: drop needlessly wide multiplication (VS2010)
The current types of subexpressions used in QemuFlashPtr() are as follows.
(We also show the types of "larger" subexpressions, according to operator
binding.)
When building with VS2010 for Ia32 / NOOPT, the 64-by-32 bit
multiplication is translated to an intrinsic, which is not allowed in
edk2.
Recognize that "Lba" is always bounded by "mFdBlockCount" (an UINTN) here
-- all callers of QemuFlashPtr() ensure that. In addition, the flash chip
in question is always under 4GB, which is why we can address it at all on
Ia32. Narrow "Lba" to UINTN, without any loss of range.
Laszlo Ersek [Fri, 14 Nov 2014 10:23:33 +0000 (10:23 +0000)]
OvmfPg: flash driver: drop gratuitous 64-by-32 bit divisions (VS2010)
In the InitializeVariableFvHeader() function, all three of "Offset",
"Start" and "BlockSize" have type UINTN. Therefore the (Offset /
BlockSize) and (Start / BlockSize) divisions can be compiled on all
platforms without intrinsics.
"Offset" and "Start" are cast to UINT64 (== EFI_LBA), which leads to
64-by-32 bit divisions on Ia32, breaking the VS2010 / NOOPT / Ia32 build.
The simplest way to fix them is to realize we don't need casts at all.
(The prototypes of QemuFlashEraseBlock() and QemuFlashWrite() are visible
via "QemuFlash.h", and they will easily take our UINTN quotients as
UINT64.)
Suggested-by: Scott Duplichan <scott@notabs.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Build-tested-by: Scott Duplichan <scott@notabs.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16383 6f19259b-4bc3-4df7-8a09-765794883524
Laszlo Ersek [Fri, 14 Nov 2014 10:23:21 +0000 (10:23 +0000)]
OvmfPg: flash driver: fix type of EFI_SIZE_TO_PAGES argument (VS2010)
The MarkMemoryRangeForRuntimeAccess() function passes the Length parameter
(of type UINT64) to the macro EFI_SIZE_TO_PAGES(). When building for the
Ia32 platform, this violates the interface contract of the macro:
[...] Passing in a parameter that is larger than UINTN may produce
unexpected results.
In addition, it trips up compilation by VS2010 for the Ia32 platform and
the NOOPT target -- it generates calls to intrinsics, which are not
allowed in edk2.
Fix both issues with the following steps:
(1) Demote the Length parameter of MarkMemoryRangeForRuntimeAccess() to
UINTN. Even a UINT32 value is plenty for representing the size of the
flash chip holding the variable store. Length parameter is used in the
following contexts:
- passed to gDS->RemoveMemorySpace() -- takes an UINT64
- passed to gDS->AddMemorySpace() -- ditto
- passed to EFI_SIZE_TO_PAGES() -- requires an UINTN. This also guarantees
that the return type of EFI_SIZE_TO_PAGES() will be UINTN, hence we can
drop the outer cast.
(2) The only caller of MarkMemoryRangeForRuntimeAccess() is
FvbInitialize(). The latter function populates the local Length variable
(passed to MarkMemoryRangeForRuntimeAccess()) from
PcdGet32(PcdOvmfFirmwareFdSize). Therefore we can simply demote the local
variable to UINTN in this function as well.
- There's only one other use of Length in FvbInitialize(): it is passed to
GetFvbInfo(). GetFvbInfo() takes an UINT64, so passing an UINTN is fine.
Suggested-by: Scott Duplichan <scott@notabs.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Build-tested-by: Scott Duplichan <scott@notabs.org> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16382 6f19259b-4bc3-4df7-8a09-765794883524
Qin Long [Fri, 14 Nov 2014 08:41:12 +0000 (08:41 +0000)]
UEFI 2.4 X509 Certificate Hash and RFC3161 Timestamp Verification support for Secure Boot
Main ChangeLogs includes:
1. Introduce the new GUID and structure definitions for certificate hash and timestamp support;
2. Update Image Verification Library to support DBT signature checking;
3. Update the related SecureBoot Configuration Pages;
Merge PciInitialization() and AcpiInitialization() into a single
function, PciAcpiInitialization(), and use a PCD set during PEI to
detect the underlying platform type (PIIX4 or Q35/MCH) and therefore
the addresses of the registers to be initialized.
Add LNK[A-H] routing target initialization for the Q35 platform.
Additionally, initialize PCI_INTERRUPT_LINE registers for the typical
set of PCI devices included by QEMU with the Q35 machine type. The
corresponding PIIX4 initialization of PCI_INTERRUPT_LINE registers is
cleaned up and the list of PIIX4 PCI devices updated to the list
typically included with QEMU.
NOTE: The list of PCI devices for which we initialize PCI_INTERRUPT_LINE
is hard-coded, and, depending on how QEMU devices are configured on
the command line, may miss some devices, or (harmlessly) attempt to
initialize devices which are not present in the system. A subsequent
patch will replace this hard-coded list with a mechanism to correctly
initialize PCI_INTERRUPT_LINE for applicable present PCI devices only.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16379 6f19259b-4bc3-4df7-8a09-765794883524
Gabriel Somlo [Fri, 14 Nov 2014 00:38:53 +0000 (00:38 +0000)]
OvmfPkg: AcpiTimerLib: Switch additional stages to PCD-based Dxe instance
Link DXE_SMM_DRIVER, UEFI_DRIVER, UEFI_APPLICATION, and SMM_CORE against
a valid, non-asserting version of PcdLib, then switch them over to using
the "Dxe" instance of AcpiTimerLib (instead of the "Base" version).
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16378 6f19259b-4bc3-4df7-8a09-765794883524
Gabriel Somlo [Fri, 14 Nov 2014 00:38:35 +0000 (00:38 +0000)]
OvmfPkg: AcpiTimerLib: Use global variable during PEI_CORE and PEIM
Since in OVMF both PEI_CORE and PEIM run from RAM, and thus may
utilize global variables, use the "Base" AcpiTimerLib instance
(instead of BaseRom) to take advantage of the improved efficiency
of storing the timer register IO address in a global variable.
This leaves only SEC using the BaseRomAcpiTimerLib instance.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16377 6f19259b-4bc3-4df7-8a09-765794883524
Gabriel Somlo [Fri, 14 Nov 2014 00:38:17 +0000 (00:38 +0000)]
OvmfPkg: AcpiTimerLib: Split into multiple phase-specific instances
Remove local power management register access macros in favor of
factored-out ones in OvmfPkg/Include/OvmfPlatforms.h
Next, AcpiTimerLib is split out into three instances, for use during
various stages:
- BaseRom: used during SEC, PEI_CORE, and PEIM;
- Dxe: used during DXE_DRIVER and DXE_RUNTIME_DRIVER;
- Base: used by default during all other stages.
Most of the code remains in AcpiTimerLib.c, to be shared by all
instances. The two platform-dependent methods (constructor and
InternalAcpiGetTimerTick) are provided separately by source files
specific to each instance, namely [BaseRom|Base|Dxe]AcpiTimerLib.c.
Since pre-DXE stages can't rely on storing data in global variables,
methods specific to the "BaseRom" instance will call platform
detection macros each time they're invoked.
The "Base" instance calls platform detection macros only from its
constructor, and caches the address required by InternalAcpiTimerTick
in a global variable.
The "Dxe" instance is very similar to "Base", except no platform
detection macros are called at all; instead, the platform type is
read via a dynamic PCD set from PlatformPei.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16376 6f19259b-4bc3-4df7-8a09-765794883524
Gabriel Somlo [Fri, 14 Nov 2014 00:37:39 +0000 (00:37 +0000)]
OvmfPkg: Add PCD for Host Bridge dev. ID (PcdOvmfHostBridgePciDevId)
Set from PEI, this PCD allows subsequent stages (specifically
DXE_DRIVER and DXE_RUNTIME_DRIVER) to infer the underlying platform
type (e.g. PIIX4 or Q35/MCH) without the need to further query the
Host Bridge for its Device ID.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16374 6f19259b-4bc3-4df7-8a09-765794883524
Jordan Justen [Thu, 13 Nov 2014 18:30:09 +0000 (18:30 +0000)]
UefiCpuPkg/CpuDxe: Startup APs
This sequence should happen:
* CpuMp.c: Allocate a stack for the APs
* ApStartup.c: Send Start IPI to wake APs in 16-bit real mode
* MpAsm.S: AP enters CpuDxe driver code without stack
- AP grabs a lock
- AP sets up stack
- AP calls CpuMp.c:ApEntryPointInC
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16370 6f19259b-4bc3-4df7-8a09-765794883524
Chen Fan [Thu, 13 Nov 2014 18:29:13 +0000 (18:29 +0000)]
UefiCpuPkg/CpuDxe: introduce ResetApStackless()
If timeout expires before AP returns from Procedure, the AP should
be terminated, we introduce ResetApStackLess() to send init IPI
to let AP exit Procedurce and re-available.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16366 6f19259b-4bc3-4df7-8a09-765794883524
Jordan Justen [Thu, 13 Nov 2014 18:25:29 +0000 (18:25 +0000)]
UefiCpuPkg/CpuDxe: Add StartApsStackless routine
This routine starts the APs and directs them to run the specified
code.
The specified code is entered without a stack being available.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16349 6f19259b-4bc3-4df7-8a09-765794883524
Jordan Justen [Thu, 13 Nov 2014 18:24:59 +0000 (18:24 +0000)]
UefiCpuPkg/CpuDxe: Add stackless assembly AP entry points
The AP startup code simply jumps into this code with the CpuDxe driver
without setting up a stack for the processor.
Therefore, this code must setup the stack before calling into C code.
This is the basic flow:
* AP enters CpuDxe driver code (AsmApEntryPoint) without stack
- AP grabs a lock
- AP sets up stack
- AP calls CpuMp.c:ApEntryPointInC
- If ApEntryPointInC returns, the lock is freed, and another AP may
run
- The AP C code may call AsmApDoneWithCommonStack to indicate that
the AP is no longer using the stack, and another may therefore
proceed to use the stack and then call ApEntryPointInC
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16347 6f19259b-4bc3-4df7-8a09-765794883524
Jordan Justen [Thu, 13 Nov 2014 18:24:25 +0000 (18:24 +0000)]
UefiCpuPkg/CpuDxe: Add no-op InitializeMpSupport
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jordan Justen <jordan.l.justen@intel.com> Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Reviewed-by: Jeff Fan <jeff.fan@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16345 6f19259b-4bc3-4df7-8a09-765794883524
Ard Biesheuvel [Thu, 13 Nov 2014 16:41:51 +0000 (16:41 +0000)]
ArmPkg/ArmGicLib: select GICv2 mode if SRE is present but unavailable
Even if the CPU id registers indicate hardware support for the
System Register interface to the GIC, higher exception levels
may disable that interface and only allow access through MMIO.
So move the enabling of the SRE bit to the GIC version detection
routine: if we trigger an exception, we would have anyway at a
later stage, so the net effect is the same. However, if setting
the bit doesn't stick, it means we can switch to MMIO and proceed
normally otherwise.
Daryl McDaniel [Tue, 11 Nov 2014 22:56:58 +0000 (22:56 +0000)]
StdLib/AppPkg: Add the NOOPT build target and fix a type conversion problem with VS2005.
AppPkg.dsc: Remove IPF support and add NOOPT build target.
StdLib.dsc: Add NOOPT build target.
daConsole.c: Cast a comparison to BOOLEAN before assigning it to a BOOLEAN.
Olivier Martin [Tue, 11 Nov 2014 00:52:46 +0000 (00:52 +0000)]
ArmPkg/ArmArchTimerLib: Promotes 32bit value to prevent overflow
Both MicroSeconds and PcdArmArchTimerFreqInHz are 32-bit values on
AArch32 so their multiplication produces 32-bit result that might
cause wrong calculation.
Example: With MicroSeconds = 200 us, PcdArmArchTimerFreqInHz = 24MHz.
200*24000000 = 0x1_1E1A_3000 => So 0x1E1A_3000 when the type is UINT32.
Olivier Martin [Tue, 11 Nov 2014 00:52:11 +0000 (00:52 +0000)]
ArmPkg/CompilerIntrinsicesLib: Fixed memmove() and memset()
- Fixed memmove when going backward: the copy started one byte
after the end of the region to copy
- memset: - removed unused register
- fixed arguments size and character arguments were
actually reversed
- Added memmove() to ARM32 GCC
Ronald Cron [Tue, 11 Nov 2014 00:49:50 +0000 (00:49 +0000)]
EmbeddedPkg/Lan9118Dxe: Remove link check in SNP initialization
The UEFI specification does not require the initialisation and reset
interface to check if an Ethernet cable is connected or not, and provides
the GetStatus() interface to do this. Furthermore, the 'Managed Network
Protocol' take care of the cable connection check in edk2 network stack.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ronald Cron <ronald.cron@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16326 6f19259b-4bc3-4df7-8a09-765794883524
Leif Lindholm [Tue, 11 Nov 2014 00:43:03 +0000 (00:43 +0000)]
ArmPlatformPkg: Increase more ARM address Pcd entries to 64-bit.
Some AArch64 platforms have RAM and flash devices >4GB.
Update some additional Pcd entries to 64-bit, and change
the corresponding PcdGet32 calls to PcdGet64.
Daryl McDaniel [Mon, 10 Nov 2014 23:05:45 +0000 (23:05 +0000)]
StdLib: Fix a "potentially uninitialized variable" error.
gdtoa/gdtoa.c: Several "goto" paths allowed the initialization of a variable to be bypassed. Initialized it at the top of the function in order to eliminate the error.
darylm503 [Fri, 7 Nov 2014 20:18:01 +0000 (20:18 +0000)]
AppPkg: Add the Lua interpreter and library.
StdLib: Add support and include files for Lua.
The sources for the Lua standalone interpreter, as well as its library, have been added to AppPkg/Applications/Lua. The Lua library, LuaLib, can be used to embed Lua into new applications.
The Lua header files, needed for both building and embedding, are located in StdLib/Include/Lua. The original versions of these header files, in the source directory, have been converted into stubs that reference the include files in StdLib. This allows us to keep the Lua sources as close to the distributed version as possible.
Documentation is contained in the Lua/doc directory. Further information is available at www.lua.org.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed Off by: Bruce Maynard <Bruce.Maynard@Emulex.Com>
Reviewed by: Daryl McDaniel <daryl.mcdaniel@intel.com>
Laszlo Ersek [Thu, 6 Nov 2014 14:21:21 +0000 (14:21 +0000)]
OvmfPkg: set video resolution of text setup to 640x480
On a physical screen such a low graphics resolution would lead to huge
glyphs (the text resolution is 80x25, centered, with 8x19 pixel glyphs).
But in a virtual machine it just saves screen real estate on the client,
by removing the black bands.
Laszlo Ersek [Thu, 6 Nov 2014 14:21:15 +0000 (14:21 +0000)]
OvmfPkg: BDS: drop custom boot timeout, revert to IntelFrameworkModulePkg's
PlatformBdsEnterFrontPage() already implements a keypress wait (for
entering the setup utility at boot) with a nice progress bar, only OVMF
has not been using it.
Removing our custom code and utilizing PlatformBdsEnterFrontPage()'s
builtin wait has the following benefits:
- It simplifies OVMF's BDS code.
- Because now we call PlatformBdsEnterFrontPage() unconditionally, it
actually has a chance to look at the EFI_OS_INDICATIONS_BOOT_TO_FW_UI
bit of the "OsIndications" variable, improving compliance with the UEFI
specification. References:
- https://bugzilla.redhat.com/show_bug.cgi?id=1153927
- http://thread.gmane.org/gmane.comp.bios.tianocore.devel/10487
- The progress bar looks nice. (And it keeps the earlier behavior intact,
when the user presses a key on the TianoCore splash screen.)
In any case, we set the timeout to 0 (which doesn't show the progress
bar and proceeds to the boot options immediately) in order to keep the
boot time down.
Laszlo Ersek [Thu, 6 Nov 2014 14:21:03 +0000 (14:21 +0000)]
OvmfPkg: BDS: optimize second argument in PlatformBdsEnterFrontPage() call
The second parameter of said function is "ConnectAllHappened", and if set
to TRUE, the function sets "gConnectAllHappened" to TRUE.
This global variable in turn controls whether Intel BDS code *itself*
calls BdsLibConnectAllDriversToAllControllers() in various places -- if
the indicator is TRUE, then the "connect all" is assumed to have been
performed, and Intel BDS doesn't do it itself.
OVMF should pass TRUE as "ConnectAllHappened", because a few lines before
our call to PlatformBdsEnterFrontPage(), we already connect everything
with BdsLibConnectAll(), which includes the effects of
BdsLibConnectAllDriversToAllControllers():
Laszlo Ersek [Thu, 6 Nov 2014 14:20:58 +0000 (14:20 +0000)]
OvmfPkg: BDS: don't overwrite the BDS Front Page timeout
The PlatformBdsEnterFrontPage() function's first parameter,
"TimeoutDefault", determines the behavior of the setup utility:
- If (TimeoutDefault == 0), then the usual boot order is to be acted upon
immediately.
- If (TimeoutDefault == 0xFFFF), then the setup utility is entered
unconditionally.
- If (0 < TimeoutDefault && TimeoutDefault < 0xFFFF), then the
PlatformBdsEnterFrontPage() function displays a progress bar, waiting
for TimeoutDefault seconds. If the user presses a key, then the setup
utility is entered, otherwise the normal boot option processing takes
place.
The TimeoutDefault parameter is supposed to be set from
which has the following (matching) documentation in
"IntelFrameworkModulePkg/IntelFrameworkModulePkg.dec":
The number of seconds that the firmware will wait before initiating the
original default boot selection.
A value of 0 indicates that the default boot selection is to be
initiated immediately on boot.
The value of 0xFFFF then firmware will wait for user input before
booting.
OVMF does this actually -- see the Timeout variable in
PlatformBdsPolicyBehavior() -- but right before calling
PlatformBdsEnterFrontPage(), OVMF hardwires TimeoutDefault to 0xFFFF.
This has been acceptable until now, because OVMF implements its own "wait
for keypress at the splash screen" logic in PlatformBdsPolicyBehavior(),
completely avoiding the progress bar mentioned above. OVMF only calls
PlatformBdsEnterFrontPage() when the user presses a key during its own
"splash screen wait", and *then* it indeed makes sense to enter the setup
utility unconditionally.
However, even that way, the
Timeout = 0xffff;
assignment is superfluous, because 0xFFFF is already the default value of
PcdPlatformBootTimeOut in "IntelFrameworkModulePkg.dec", and OvmfPkg
doesn't override it in its DSC files.
Olivier Martin [Wed, 5 Nov 2014 18:56:17 +0000 (18:56 +0000)]
BaseTools/GenFw: Fixed R_AARCH64_CALL26/R_AARCH64_JUMP26 when referring to start of a section
When R_AARCH64_CALL26/R_AARCH64_JUMP26 relocations referred to static
functions, they sometime refer to the start of the '.text' section + addend.
It means the addend is different of '0'.
The non-patched code (before applying the relocation) already contains
the correct offset.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Yingke Liu <yingke.d.liu@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16302 6f19259b-4bc3-4df7-8a09-765794883524
Jeff Fan [Tue, 4 Nov 2014 01:29:20 +0000 (01:29 +0000)]
1. Remove any references on other files from DebugTimer.c, to avoid un-used symbols linked.
2. Add GLOBAL_REMOVE_IF_UNREFERENCED for all global variables.
Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Jeff Fan <jeff.fan@intel.com> Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@16298 6f19259b-4bc3-4df7-8a09-765794883524
projects / mirror_edk2.git / log