Rebecca Cran [Fri, 26 Aug 2022 01:31:46 +0000 (09:31 +0800)]
BaseTools: Fix DevicePath GNUmakefile for macOS
On macOS, /usr/bin/gcc is clang, and so doesn't have
the -Wno-error=stringop-overflow flag that was added
for gcc 12.
Update the GNUmakefile for DevicePath to skip setting
that on macOS.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Abner Chang [Thu, 25 Aug 2022 10:33:36 +0000 (18:33 +0800)]
Maintainers.txt: Update maintainers list
Update package maintainers for below package/arch,
1. RISCV64 Architecture:
Abner is stepping out from RISC-V stuff for now and hand over edk2 RISC-V
responsibilities to Sunil.
Daniel Schaefer is no longer with HPE. Update his email address for
RISCV64 arch. He will keep helping on RISC-V stuff with his personal
email.
2. EmbeddedPkg:
Daniel Schaefer is no longer with HPE. Update his email address for
EmbeddedPkg.
3. EmulatorPkg and RedfishPkg:
Nickle Wang is no longer with HPE. Update his email address for
EmulatorPkg and RedfishPkg packages. He will use the personal email for
the time being until he gets ready with his next journey.
Signed-off-by: Abner Chang <abner.chang@amd.com> Cc: Andrew Fish <afish@apple.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Daniel Schaefer <git@danielschaefer.me> Cc: Sunil V L <sunilvl@ventanamicro.com> Cc: Nickle Wang <nickle@csie.io> Reviewed-by: Daniel Schaefer <git@danielschaefer.me> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Nickle Wang <nickle@csie.io> Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
ACPI 6.4 spec states that if the revision field in the DSDT header is less
than 2, then all integers are restricted in width to 32 bits, including in
SSDTs.
Arm Base boot requirements state that platforms must conform to ACPI 6.3
or later, and that legacy tables are not supported.
Adds a check for this field and raise warning if revision is less
than 2 on arm.
Signed-off-by: Edward Pickup <edward.pickup@arm.com> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Abner Chang [Tue, 23 Aug 2022 02:09:37 +0000 (10:09 +0800)]
RedfishPkg: Redfish functions for REST requests are not fully spec complied
There is no function to send POST request with the
ContentType different from "application\json".
There is no function to send DELETE request with the body.
Cc: Abner Chang <abner.chang@amd.com> Cc: Nickle Wang <nickle.wang@hpe.com> Signed-off-by: Igor Kulchytskyy <igork@ami.com> Reviewed-by: Abner Chang <abner.chang@amd.com>
Abner Chang [Mon, 15 Aug 2022 01:47:30 +0000 (09:47 +0800)]
RedfishPkg/RedfishDiscoverDxe: USB Redfish host interface is not supported
Host Interface details are described by the SMBIOS Type 42
table. The table is published by the RedfishHostInterfaceDxe
driver. That driver supports PCI-E and USB host interface
types.The table is consumed by the edfishGetHostInterfaceProtocolData
function in the RedfishDiscoverDxe driver. The function only supports
PCI-E host interface type.
Cc: Abner Chang <abner.chang@amd.com> Cc: Nickle Wang <nickle.wang@hpe.com> Signed-off-by: Igor Kulchytskyy <igork@ami.com> Reviewed-by: Abner Chang <abner.chang@amd.com>
When the size of a EFI_SECTION_FREEFORM_SUBTYPE_GUID section required
the use of EFI_FREEFORM_SUBTYPE_GUID_SECTION2 header, set the section
type to EFI_SECTION_FREEFORM_SUBTYPE_GUID.
Cc: Leif Lindholm <llindhol@qti.qualcomm.com> Cc: Andrew Fish <afish@apple.com> Cc: Konstantin Aladyshev <aladyshev22@gmail.com> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Yuwei Chen <yuwei.chen@intel.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Acked-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com> Reviewed-by: Leif Lindholm <llindhol@qti.qualcomm.com>
Sainadh Nagolu [Wed, 17 Aug 2022 07:35:23 +0000 (15:35 +0800)]
ShellPkg: Improved Smbios Type 9 table changes in PrintInfo.c
Since PeerGroups has a variable number of entries, new fields added
after PeerGroups are defined in a extended structure.
Done changes in PrintInfo.c to access those fields using
SMBIOS_TABLE_TYPE9_EXTENDED structure from SmBios.h.
Sainadh Nagolu [Wed, 17 Aug 2022 07:35:23 +0000 (15:35 +0800)]
MdePkg: Improved Smbios Type9 table and Smbios spec v3.5.0 Changes
In Type9 structure since PeerGroups has a variable
number of entries, must not define new fields in the structure.So added an
extended structure and defined new fields added after PeerGroups. Also done
some improvements to Smbios 3.5.0 spec changes.
MdeModulePkg/DumpDynPcd: Remove unsupported format specifiers
Some print statements use format specifiers like %N/%H/%E/%B that are
only supported in the shell print functions. In the ordinary 'Print'
function they are just displayed as letters N/H/E/B.
Remove these unsupported format specifiers from the 'Print' statements
to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Dimitrije Pavlov [Tue, 16 Aug 2022 20:28:35 +0000 (15:28 -0500)]
OvmfPkg/PlatformDxe: Check ExtractConfig and RouteConfig arguments
The current implementation does not check if Progress or Results
pointers in ExtractConfig are NULL, or if Progress pointer in
RouteConfig is NULL. This causes the SCT test suite to crash.
Add a check to return EFI_INVALID_PARAMETER if any of these pointers
are NULL.
Signed-off-by: Dimitrije Pavlov <Dimitrije.Pavlov@arm.com> Reviewed-by: Sunny Wang <sunny.wang@arm.com>
Zhiguang Liu [Mon, 27 Jun 2022 08:58:48 +0000 (16:58 +0800)]
UefiCpuPkg/CpuPageTableLib/UnitTest: Add host based unit test
Add host based unit tests for the CpuPageTableLib services.
Unit test focuses on PageTableMap function, containing two kinds of test
cases: manual test case and random test case.
Manual test case creates some corner case to test function PageTableMap.
Random test case generates multiple random memory entries (with random
attribute) as the input of function PageTableMap to get the output
pagetable. Output pagetable will be validated and be parsed to get output
memory entries, and then the input and output memory entries will be
compared to verify the functionality.
The unit test is not perfect yet. There are options for random test, and
some of them control the test coverage, and some option are not ready.
Will enhance in the future.
Cc: Eric Dong <eric.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
For the SMBIOS version can be update by UPL,we create
the gUniversalPayloadSmbios3TableGuid HOB to store
the value then updated version.
Cc: Guo Dong <guo.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: James Lu <james.lu@intel.com> Reviewed-by: Gua Guo <gua.guo@intel.com> Signed-off-by: KasimX Liu <kasimx.liu@intel.com>
Dun Tan [Wed, 10 Aug 2022 03:31:57 +0000 (11:31 +0800)]
UefiPayloadPkg: Remove clearing CR0.WP when protecting pagetable
Remove clearing CR0.WP when marking the memory used for page table
as read-only in the page table itself created by UefiPayloadEntry.
This page table address is written to Cr3 after these protection
steps. Till this, the memory used for page table is always RW.
Signed-off-by: Dun Tan <dun.tan@intel.com> Reviewed-by: Guo Dong <guo.dong@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Cc: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Ray Ni <ray.ni@intel.com>
Dun Tan [Tue, 26 Jul 2022 14:13:40 +0000 (22:13 +0800)]
MdeModulePkg/DxeIpl: Remove clearing CR0.WP when protecting pagetable
Remove clearing CR0.WP when marking the memory used for page table
as read-only in the page table itself created by DxeIpl. This page
table address is written to Cr3 after these protection steps. Till
this, the memory used for page table is always RW.
Signed-off-by: Dun Tan <dun.tan@intel.com> Cc: Dandan Bi <dandan.bi@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Ray Ni <ray.ni@intel.com>
Dun Tan [Tue, 9 Aug 2022 07:58:28 +0000 (15:58 +0800)]
UefiCpuPkg/PiSmmCpuDxeSmm: Remove mInternalCr3 in PiSmmCpuDxeSmm
This patch is code refactoring and doesn't change any functionality.
Remove mInternalCr3 in PiSmmCpuDxe pagetable related code. In previous
code, mInternalCr3 is used to pass address of page table which is
different from Cr3 register in different level of SetMemoryAttributes
function. Now remove it and pass the page table base address from the
root function parameter to simplify the code logic.
Signed-off-by: Dun Tan <dun.tan@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
Dun Tan [Tue, 9 Aug 2022 07:22:07 +0000 (15:22 +0800)]
UefiCpuPkg/PiSmmCpuDxeSmm: Add a new mIsShadowStack flag
This patch is code refactoring and doesn't change any functionality.
Add a new mIsShadowStack flag to identify whether current memory is
shadow stack. Previous smm code logic regards a RO range as shadow
stack and set the dirty bit in corresponding page table entry if
mInternalCr3 is not 0, which may be confusing.
Signed-off-by: Dun Tan <dun.tan@intel.com> Cc: Eric Dong <eric.dong@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
If Configured Memory Speed is 65,535 MT/s or greater,
and the actual speed is stored in the Extended Configured Memory Speed
field. but current Smbiosview have no this logic.
Change flow to bus scan all root bridge instances even when any
one root bridge meet bus resource OUT_OF_RESOURCE case.
thus platform handler of "EfiPciHostBridgeEndBusAllocation" has
an chance to do relative pci bus rebalance to handle this case.
Signed-off-by: Foster Nong <foster.nong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com>
Michael D Kinney [Wed, 10 Aug 2022 04:22:54 +0000 (21:22 -0700)]
MdePkg/Library/UefiDevicePathLib: Add back StandaloneMm INF file
REF: https://github.com/tianocore/edk2/pull/3130
The above PR removed UefiDevicePathLibStandaloneMm.inf, which is
a non-backwards compatible change and does not provide time for
downstream platforms to use the UefiDevicePathLibBase.inf.
Add UefiDevicePathLibStandaloneMm.inf back, but add comments that
it is deprecated and that UefiDevicePathLibBase.inf should be used
instead.
Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Cc: Mateusz Albecki <mateusz.albecki@intel.com> Cc: Yanbo Huang <yanbo.huang@intel.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Ray Ni [Fri, 15 Jul 2022 12:40:29 +0000 (20:40 +0800)]
CpuPageTableLib: Fix a bug to avoid unnecessary changing to page table
With the following paging structure that maps [0, 2G] with ReadWrite
bit set.
PML4[0] --> PDPTE[0] --> PDE[0-255]
\-> PDPTE[1] --> PDE[0-255]
If ReadWrite bit is cleared in PML4[0] and PageTableMap() is called
to change [0, 2M] as read-only, today's logic unnecessarily changes
the paging structure in 2 aspects:
1. When setting PageTableBaseAddress in the entry, the code clears
all attributes.
2. Even the ReadWrite bit in parent entry is not set, the code clears
the ReadWrite bit in the leaf entry.
First change is wrong. It should not change other attributes when
setting the PA.
Second change is unnecessary. Because the parent entry already
declares the whole region as read-only, there is no need to clear
ReadWrite bit in the leaf entry again.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Ray Ni [Fri, 15 Jul 2022 12:10:08 +0000 (20:10 +0800)]
CpuPageTableLib: Fix parent attributes are not inherited properly
With the following paging structure that maps [0, 2G] with ReadWrite
bit set.
PML4[0] --> PDPTE[0] --> PDE[0-255]
\-> PDPTE[1] --> PDE[0-255]
If ReadWrite bit is cleared in PML4[0] and PageTableMap() is called
to change [0, 2M] as writable, today's logic doesn't inherit the
parent entry's attributes when determining the child entry's
attributes. It just sets the PDPTE[0].PDE[0].ReadWrite bit.
But since the PML4[0].ReadWrite is 0, [0, 2M] is still read-only.
The change fixes the bug.
If the inheritable attributes in ParentPagingEntry conflicts with the
requested attributes, let the child entries take the parent attributes
and loosen the attribute in the parent entry.
E.g.: when PDPTE[0].ReadWrite = 0 but caller wants to map [0-2MB as
ReadWrite = 1 (PDE[0].ReadWrite = 1), we need to change
PDPTE[0].ReadWrite = 1 and let all PDE[0-255].ReadWrite = 0 first.
Then change PDE[0].ReadWrite = 1.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com> Signed-off-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Ray Ni [Thu, 14 Jul 2022 12:08:29 +0000 (20:08 +0800)]
CpuPageTableLib: Split the page entry when LA is aligned but PA is not
When PageTableMap() is called to create non 1:1 mapping
such as [0, 1G) to [8K, 1G+8K), it should split the page entry to the
4K page level, but old logic has a bug that it just uses 1G page
entry.
The patch fixes the bug.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Ray Ni [Thu, 14 Jul 2022 10:00:47 +0000 (18:00 +0800)]
CpuPageTableLib: Refactor the logic
The patch replaces
LinearAddress + Offset == RegionStart
with
((LinearAddress + Offset) & RegionMask) == 0
The replace should not cause any behavior change.
Because:
1. In first loop of while when LinearAddress + Offset == RegionStart,
because the lower "BitStart" bits of RegionStart are all-zero,
all lower "BitStart" bits of (LinearAddress + Offset) are all-zero.
Because all lower "BitStart" bits of RegionMask is all-one and
bits are all-zero, ((LinearAddress + Offset) & RegionMask) == 0.
2. In following loops of the while, even RegionStart is increased
by RegionLength, the lower "BitStart" bits are still all-zero.
So the two expressions still semantically equal to each other.
Signed-off-by: Ray Ni <ray.ni@intel.com> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Ray Ni [Thu, 14 Jul 2022 06:33:18 +0000 (14:33 +0800)]
UefiCpuPkg: Create CpuPageTableLib for manipulating X86 paging structs
The lib includes two APIs:
* PageTableMap
It creates/updates mapping from LA to PA.
The implementation only supports paging structures used in 64bit
mode now. PAE paging structure support will be added in future.
* PageTableParse
It parses the page table and returns the mapping relations in an
array of IA32_MAP_ENTRY.
It passed some stress tests. These test code will be upstreamed in
other patches following edk2 Unit Test framework.
Signed-off-by: Ray Ni <ray.ni@intel.com> Reviewed-by: Eric Dong <eric.dong@intel.com>
Liu, Zhiguang [Tue, 9 Aug 2022 01:25:37 +0000 (09:25 +0800)]
UefiCpuPkg: Simplify the struct definition of CPU_EXCEPTION_INIT_DATA
CPU_EXCEPTION_INIT_DATA is now an internal implementation of
CpuExceptionHandlerLib. Union can be removed since Ia32 and X64 have the
same definition. Also, two fields (Revision and InitDefaultHandlers)are
useless, can be removed.
Cc: Eric Dong <eric.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Liu, Zhiguang [Tue, 9 Aug 2022 01:25:36 +0000 (09:25 +0800)]
MdeModulePkg: Move CPU_EXCEPTION_INIT_DATA to UefiCpuPkg
Since the API InitializeSeparateExceptionStacks is simplified and does't
use the struct CPU_EXCEPTION_INIT_DATA, CPU_EXCEPTION_INIT_DATA become
a inner implementation of CpuExcetionHandlerLib.
Cc: Eric Dong <eric.dong@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Cc: Dandan Bi <dandan.bi@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Jian J Wang <jian.j.wang@intel.com> Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Jose Marinho [Tue, 26 Jul 2022 16:54:42 +0000 (17:54 +0100)]
PrmPkg: Add details on AArch64 build to the Readme.
Specify how to build the PrmPkg for the AArch64 architecture.
Make the 2 following notes:
- the PrmPkg has only been tested on AArch64 using the GCC5
toolchain.
- All symbols to be listed in the PRMT as well as the
PrmModuleExportDescriptor must be explicitly preserved by resorting to
the --require-defined linker flag.
Signed-off-by: Jose Marinho <jose.marinho@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Jose Marinho [Tue, 5 Apr 2022 17:57:23 +0000 (18:57 +0100)]
PrmPkg: Build Prm Samples with GCC for AARCH64
- Add the --prm flag to the GENFW_FLAGS
- Add the --no-gc-section to the linker flags so that apparently
unreferenced symbols are not prematurely removed from the .dll which
is used to generate the Prm module .efi.
- Force the linker to maintain the PrmModuleExportDescriptor symbol.
- Force the linker to maintain the PRM handler funtion's symbol.
Signed-off-by: Jose Marinho <jose.marinho@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Jose Marinho [Fri, 29 Oct 2021 16:48:26 +0000 (17:48 +0100)]
Basetools/GenFw: Allow AARCH64 builds to use the --prm flag
The GenFw invocation with the --prm flag was previously reserved for
X64.
AArch64 platforms, built with GCC5, can also deploy PRM modules, hence
the --prm flag is also applicable in builds targeting the AARCH64
architecture.
This commit enables the --prm flag to be used for EDK2 builds targeting
AARCH64.
Signed-off-by: Jose Marinho <jose.marinho@arm.com> Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Currently there is no labels for start and end of the
EFI_SECTION_FIRMWARE_VOLUME_IMAGE type section. Therefore it is not
possible to see where the FV section ends and another section starts.
Add labels for start and end of the FV sections to fix the issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
This change modifies AhciPei library to allow usage both EDKII_PCI_DEVICE_PPI
and EDKII_PEI_ATA_AHCI_HOST_CONTROLLER_PPI to manage ATA HDD working under
AHCI mode.
Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Signed-off-by: Maciej Czajkowski <maciej.czajkowski@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This commit introduces EDKII_PCI_DEVICE_PPI. The purpose of this PPI is
to provide a way of accessing PCI devices to drvice drivers such as
NvmExpressPei or AhciPei.
Cc: Hao A Wu <hao.a.wu@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Signed-off-by: Maciej Czajkowski <maciej.czajkowski@intel.com> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Sean Rhodes [Mon, 4 Jul 2022 19:36:31 +0000 (20:36 +0100)]
UefiPayloadPkg/PlatformBootManagerLib: Correct spacing in boot prompt
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Signed-off-by: Sean Rhodes <sean@starlabs.systems>
OvmfPkg/QemuVideoDxe: Zero out PixelInformation in QueryMode
Ensure that the PixelInformation field of the
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION structure is zeroed out in
EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() and
EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() when PixelFormat is
PixelBlueGreenRedReserved8BitPerColor.
According to UEFI 2.9 Section 12.9, PixelInformation field of the
EFI_GRAPHICS_OUTPUT_MODE_INFORMATION structure is valid only if
PixelFormat is PixelBitMask. This means that firmware is not required
to fill out the PixelInformation field for other PixelFormat types,
which implies that the QemuVideoDxe implementation is technically
correct.
However, not zeroing out those fields will leak the contents of the
memory returned by the memory allocator, so it is better to explicitly
set them to zero.
In addition, the SCT test suite relies on PixelInformation always
having a consistent value, which causes failures.
As per TCG PC Client Device Driver Design Principle document,
if tpm commands fails due to timeout condition, then it should
have retry mechanism (3 retry attempts).
Existing implementation of PtpCrbTpmCommand does not have retry
mechanism if it fails with EFI_TIMEOUT.
See TCG PC Client Device Driver Design Principles for TPM 2.0
https://trustedcomputinggroup.org/wp-content/uploads/TCG_PCClient_Device_Driver_Design_Principles_TPM2p0_v1p1_r4_211104_final.pdf
Vision 1.1, Revision 0.04
Section 7.2.1
Signed-off-by: Qi Zhang <qi1.zhang@intel.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jian J Wang <jian.j.wang@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Tested-by: Swapnil Patil <S.Keshavrao.Patil@dell.com>
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT generator to:
- increment IORT table revision count to 5.
- populate Identifier filed if revision is greater than 4.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.
- Populate the PASID capabilities and Flags field of the
Root complex node.
- Added checks to not generate IORT Rev E, Rev E.<a,b,c>.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the Arm namespace objects to:
- add Identifier field to IORT nodes.
- introduce enums to represent RMR nodes and Memory Range
descriptors.
- add definition of node type 6 - Reserved Memory Range node.
- add definition for Memory Range Descriptors.
- add PASID capabilities and flags field to Root Complex node.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT parser to:
- parse the Identifier field.
- parse Reserved Memory Range node.
- parse Memory Range Descriptors.
- add validations to check that the physical range base
and size of the Memory Range Descriptor is 64KB aligned.
- add validation to check that the IORT Table Revision is
not 4 as IORT Rev E.c is deprecated.
- add validation to check that the IORT RMR node revision
is not 2 as it breaks backward compatibility and was
deprecated as part of IORT Rev E.c.
- skip parsing of IORT Rev E, Rev E.a, Rev E.b, Rev E.c as
some fields were deprecated in these revisions.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
The IO Remapping Table, Platform Design Document, Revision E.d,
Feb 2022 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E, Rev E.a, Rev E.b, Rev E.c:
- increments the IORT table revision to 5.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.
- adds flag to indicate if the root complex supports PASID.
- adds flags to define access privilege and attributes for the
memory ranges.
Therefore, update the IORT header file to reflect these changes,
and also rename the EFI_ACPI_IO_REMAPPING_TABLE_REVISION macro to
EFI_ACPI_IO_REMAPPING_TABLE_REVISION_00.
Also update the IORT generator in DynamicTablesPkg to fix the
compilation errors so that Git Bisect can work.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Sami Mujawar [Thu, 14 Jul 2022 16:50:27 +0000 (17:50 +0100)]
DynamicTablesPkg: IORT set reference to interrupt array if present
The IORT generator is populating the reference field for Context and
PMU interrupts even if their count is zero.
Update the IORT generator to set the references only if the interrupt
count is not 0. Also add checks to ensure a valid reference token has
been provided.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Sami Mujawar [Thu, 14 Jul 2022 16:50:26 +0000 (17:50 +0100)]
DynamicTablesPkg: IORT set reference to Id array only if present
The IORT table generator is setting up a reference to ID array for
nodes even when the ID Mapping count is zero. This is not an issue as an
OS would only access the ID Reference if the ID mapping count is not zero.
However, it would be good to set the reference to ID array to zero when
the ID Mapping count is zero rather than populating it with an incorrect
value.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Sami Mujawar [Thu, 14 Jul 2022 16:50:24 +0000 (17:50 +0100)]
ShellPkg: Acpiview: Abbreviate field names to preserve alignment
Some field names in the IORT table parser were longer than the
OUTPUT_FIELD_COLUMN_WIDTH plus indentation, resulting in loss of
the output print alignment. Therefore, abbreviate the field names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com> Reviewed-by: Zhichao Gao <zhichao.gao@intel.com> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3993
FSPI_UPD is required only When platforms implemented FSP_I component.
Updated the scripts to allow FSPI_UPD not present scenario.
Also fixed FSP_GLOBAL_DATA structure alignment issue and unnecessary
non-backward compatibility change in previous FSP_I patch.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com> Cc: Star Zeng <star.zeng@intel.com> Signed-off-by: Chasel Chiu <chasel.chiu@intel.com> Reviewed-by: Star Zeng <star.zeng@intel.com>
Anthony PERARD [Wed, 20 Jul 2022 13:17:10 +0000 (06:17 -0700)]
OvmfPkg/XenHypercallLib: Fix naming of AArch64
Fix path to follow naming convention of "AArch64", and allow the path
in "Maintainers.txt" to work as expected.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3982 Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
Michael D Kinney [Tue, 26 Jul 2022 19:43:03 +0000 (12:43 -0700)]
Maintainers.txt: Remove MptScsi and PvScsi reviewers
The email addresses for the reviewers of the MptScsi and
PvScsi in the OvmfPkg are no longer valid. Remove the
reviewers for the MptScsi and PvScsi drivers until new
maintainers/reviewers can be identified.
Cc: Andrew Fish <afish@apple.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
Michael D Kinney [Tue, 26 Jul 2022 19:40:00 +0000 (12:40 -0700)]
OvmfPkg: Change default to disable MptScsi and PvScsi
The email addresses for the reviewers of the MptScsi and
PvScsi are no longer valid. Disable the MptScsi and PvScsi
drivers in all DSC files until new maintainers/reviewers can
be identified.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Sebastien Boeuf <sebastien.boeuf@intel.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Min Xu <min.m.xu@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org>
Benjamin Doron [Sun, 22 May 2022 18:20:55 +0000 (14:20 -0400)]
UefiPayloadPkg: Add support for logging to CBMEM console
Writes TianoCore debug logs into the CBMEM console ringbuffer, from
where the user can retrieve them with the `cbmem` userspace utility.
The intention is to aid in debugging non-fatal issues even in release
builds, or simply make TianoCore's logs available to those interested.
Consequently, MDEPKG_NDEBUG must be masked. As an in-memory debug
logging library, ASSERTs must be non-fatal to be seen, so they neither
dead-loop nor create a breakpoint. It is assumed that ASSERT() neither
enforces fatal conditions nor security integrity, as release builds do
not call DebugAssert() from the ASSERT macro.
More detailed debug logs are produced with the DEBUG_CODE macro, but
this guards other debug-related code throughout the codebase. To avoid
changing behaviour on release builds, this is only set for debug builds.
Tested on QEMU, dumping the appropriate memory region in the UEFI shell
shows the TianoCore log. An improved revision of the debug library used
in several coreboot-related EDK2 forks, including MrChromebox's.
Previous revisions also tested on an Acer Aspire VN7-572G laptop.
Cc: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Maurice Ma <maurice.ma@intel.com> Cc: Benjamin You <benjamin.you@intel.com> Cc: Sean Rhodes <sean@starlabs.systems> Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Under function RolocateElfDynamic() in Elf32Lib.c
if (RelaAddress == MAX_UINT64) is always FALSE while RelaAddress is UINT32
Fix is to modify if condition check to "if (RelaAddress == MAX_UINT32)"
Cc: Ray Ni <ray.ni@intel.com> Cc: Guo Dong <guo.dong@intel.com> Cc: Gua Guo <gua.guo@intel.com> Signed-off-by: James Lu <james.lu@intel.com> Reviewed-by: Guo Dong <guo.dong@intel.com>
Currently there is no labels for start and end of the encapsulation
sections. Therefore it is not possible to see where the encapsulation
section ends and another section starts.
Add labels for start and end of encapsulation sections to fix the
issue.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Windows-based system using signtool.exe to sign the capsule.
Add the support to using "--subject-name" argument to assign
the subject name used to sign the capsule file.
This argument would pass to signtool.exe as a part of input
argument with "/n" flag.
NOTE: If using signtool.exe to sign capsule at least need to
choose one of "--pfx-file" and "--subject-name"
argument to input the value.
Signed-off-by: Jason1 Lin <jason1.lin@intel.com> Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Yuwei Chen <yuwei.chen@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Dakota Chiang <dakota.chiang@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Michael D Kinney [Wed, 20 Jul 2022 20:02:12 +0000 (13:02 -0700)]
Maintainers.txt: Remove reviewer Harry Han
Cc: Harry Han <harry.han@intel.com> Cc: Andrew Fish <afish@apple.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Harry Han <harry.han@intel.com> Reviewed-by: Andrew Fish <afish@apple.com>
Michael D Kinney [Wed, 20 Jul 2022 17:30:50 +0000 (10:30 -0700)]
Maintainers.txt: Add missing github ids
Cc: Andrew Fish <afish@apple.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Cc: Daniel Schaefer <daniel.schaefer@hpe.com> Cc: Sean Rhodes <sean@starlabs.systems> Cc: Debkumar De <debkumar.de@intel.com> Cc: Erdem Aktas <erdemaktas@google.com> Cc: Gary Lin <gary.lin@hpe.com> Cc: Julien Grall <julien@xen.org> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Reviewed-by: Daniel Schaefer <daniel.schaefer@hpe.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Debkumar De <debkumar.de@intel.com> Acked-by: Gary Lin <gary.lin@hpe.com> Reviewed-by: Andrew Fish <afish@apple.com>
XenTimerDxe has been removed from the OvmfPkg. Remove
file pattern for XenTimerDxe reviews from Maintainers.txt.
Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Julien Grall <julien@xen.org> Cc: Andrew Fish <afish@apple.com> Cc: Leif Lindholm <quic_llindhol@quicinc.com> Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Andrew Fish <afish@apple.com>
Add CRYPTO_PROTOCOL_SUPPORT to decide CryptoDxe built into UPL.efi
If CRYPTO_PROTOCOL_SUPPORT is true, BIOS will use crypto protocol
instead of building OpensslLib into drivers.
Reviewed-by: Guo Dong <guo.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: James Lu <james.lu@intel.com> Reviewed-by: Gua Guo <gua.guo@intel.com> Signed-off-by: PaytonX Hsieh <paytonx.hsieh@intel.com>
Zhiguang Liu [Wed, 6 Jul 2022 13:10:13 +0000 (21:10 +0800)]
UefiCpuPkg: Fix nasm warning "signed byte value exceeds"
Currently, "push byte %[Vector]" causes nasm warning when Vector is larger
than 0x7F. This is because push accepts a signed value, and byte means
signed int8. Maximum signed int8 is 0x7F.
When Vector is larger the 0x7F, for example, when Vector is 255, byte 255
turns to -1, and causes the warning "signed byte value exceeds".
To avoid such warning, use dword instead of byte, this will increase 3 bytes
for each IdtVector.
For IA32, the size of IdtVector will increase from 10 bytes to 13 bytes.
For X64, the size of IdtVector will increase from 15 bytes to 18 bytes.
Cc: Eric Dong <eric.dong@intel.com> Cc: Ray Ni <ray.ni@intel.com> Cc: Rahul Kumar <rahul1.kumar@intel.com> Cc: Debkumar De <debkumar.de@intel.com> Cc: Harry Han <harry.han@intel.com> Cc: Catharine West <catharine.west@intel.com> Reviewed-by: Ray Ni <ray.ni@intel.com> Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
- Correct typo in print statement,
- "BuildNumber" field is UINT16, therefore it needs "0x%04X" format
modifier,
- "VersionString" field is CHAR16, therefore the input data should be
processed to be displayed with "%s" printf modifier.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BaseTools/VolInfo: Increase define for highest section value
Currently sections with unknown types are displayed as
`EFI_SECTION_SMM_DEPEX` which is wrong.
Increase the highest value for the section type to 0x1C
for correct parsing.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Yuwei Chen<yuwei.chen@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Alignment attribute is not a bitmask, therefore we need to compare
field value with all alignment defines.
Remove duplicate print statements. Unify indent with other attribute
print statements.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com> Reviewed-by: Yuwei Chen <yuwei.chen@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BaseTools: INF should use latest Pcd value instead of default value
This patch is a bug fix about FeatureFlagExpression in INF file:
INF [Source] section now unconditionally use Pcd default value in DEC
when handling FeatureFlagExpression, it is wrong.
If a Pcd value has been set in the DSC file, we should use latest
value in DSC instead of default value.
Cc: Bob Feng <bob.c.feng@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Signed-off-by: Yi Li <yi1.li@intel.com> Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The EFI_STATUS_CODE_DATA_MAX_SIZE is defined as 200 in MdeModulePkg.
After reducing 96byte buffer for variable parameters it is limited to
only 104 char debug string. This is a non-necessary limitation.
This change sets EFI_STATUS_CODE_DATA_MAX_SIZE to 0x200, and moves
MAX_EXTENDED_DATA_SIZE definition to the same header file with value
of EFI_STATUS_CODE_DATA_MAX_SIZE + sizeof (EFI_STATUS_CODE_DATA)
which is used in ReportStatusCodeLib to support longer debug string.
Cc: Jian J Wang <jian.j.wang@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Dandan Bi <dandan.bi@intel.com> Signed-off-by: Cosmo Lai <cosmo.lai@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn> Reviewed-by: Dandan Bi <dandan.bi@intel.com>
DevicePathLib utilities are useful in PEI to locate the devices which need
an opal unlock on S3 resume. This commit reuses the implementation done
for standalone MM support and makes the StandaloneMm library Base.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn> Cc: Zhiguang Liu <zhiguang.liu@intel.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Adding the missing FSPI_ARCH_UPD, FSP_GLOBAL_DATA_VERSION bumpping up,
and some comments for clarification.
Also fixed a bug in SplitFspBin.py for FSP-I support.
Ard Biesheuvel [Fri, 17 Dec 2021 21:34:03 +0000 (22:34 +0100)]
ArmPkg/CpuDxe: drop ARM_PROCESSOR_TABLE pseudo-ACPI table
The ARM_PROCESSOR_TABLE pseudo-ACPI table (which carries a ACPI-table
like header but is published as a EFI config table) is not described in
any relevant spec, and is not known to be relied upon by any OS. Let's
just get rid of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Sami Mujawar <sami.mujawar@arm.com> Tested-by: Sami Mujawar <sami.mujawar@arm.com>
In UEFI spec, it defines reconnect timing that will be activated upon
exiting of the formset or the browser. However, we did't use this kind
of way to check reconnect conditioncode. Code only blocks reconnect if
page is updated dynamically. That's not matched spec'd way. We should
check current formset whether is exiting, then reconnect driver.
Signed-off-by: Walon Li <walon.li@hpe.com> Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Stacy Howell [Fri, 7 Jan 2022 19:36:12 +0000 (03:36 +0800)]
MdeModulePkg/CoreDxe: Allow DXE Drivers to use untested memory
REF: https://https://bugzilla.tianocore.org/show_bug.cgi?id=3795 Cc: Dandan Bi <dandan.bi@intel.com> Cc: Liming Gao <gaoliming@byosoft.com.cn>
Updated CoreInternalAllocatePages() to call PromoteMemoryResource() and
re-attempt the allocation if unable to convert the specified memory range
Gary Lin [Fri, 13 Aug 2021 02:11:11 +0000 (19:11 -0700)]
Maintainers.txt: update Gary's email address
I've left SUSE last month, so the original email address is not
functional anymore. Update my email address to the new one.
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org> Cc: Jiewen Yao <jiewen.yao@intel.com> Cc: Andrew Fish <afish@apple.com> Cc: Leif Lindholm <leif@nuviainc.com> Cc: Michael D Kinney <michael.d.kinney@intel.com> Signed-off-by: Gary Lin <gary.lin@hpe.com> Reviewed-by: Jiewen Yao <jiewen.yao@intel.com> Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
IntelFsp2Pkg/FspSecCore: Add FSP-I API for SMM support.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3993
Add FSP-I API entry point for SMM support.
Also update 64bit API entry code to assign ApiIdx to RAX
to avoid confusion.
projects / mirror_edk2.git / log