From 4a50cf4ebd7e1ba5b9218a37fb33093fb23ec5ec Mon Sep 17 00:00:00 2001 From: Ruiyu Ni Date: Mon, 18 Jan 2016 04:50:18 +0000 Subject: [PATCH] MdeModulePkg: Add generic PciHostBridgeDxe driver. This driver links to PciHostBridgeLib provided by platform/silicon to produce PciRootBridgeIo and PciHostBridgeResourceAllocation protocol. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni Reviewed-by: Feng Tian git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19658 6f19259b-4bc3-4df7-8a09-765794883524 --- .../Bus/Pci/PciHostBridgeDxe/PciHostBridge.c | 1134 ++++++++++++ .../Bus/Pci/PciHostBridgeDxe/PciHostBridge.h | 252 +++ .../Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf | 55 + .../Pci/PciHostBridgeDxe/PciHostResource.h | 47 + .../Bus/Pci/PciHostBridgeDxe/PciRootBridge.h | 568 ++++++ .../Pci/PciHostBridgeDxe/PciRootBridgeIo.c | 1561 +++++++++++++++++ MdeModulePkg/MdeModulePkg.dsc | 2 + 7 files changed, 3619 insertions(+) create mode 100644 MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c create mode 100644 MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h create mode 100644 MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf create mode 100644 MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h create mode 100644 MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridge.h create mode 100644 MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c new file mode 100644 index 0000000000..08285d84d5 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c @@ -0,0 +1,1134 @@ +/** @file + + Provides the basic interfaces to abstract a PCI Host Bridge Resource Allocation. + +Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.
+This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include "PciHostBridge.h" +#include "PciRootBridge.h" +#include "PciHostResource.h" + + +EFI_METRONOME_ARCH_PROTOCOL *mMetronome; +EFI_CPU_IO2_PROTOCOL *mCpuIo; + +GLOBAL_REMOVE_IF_UNREFERENCED CHAR16 *mAcpiAddressSpaceTypeStr[] = { + L"Mem", L"I/O", L"Bus" +}; +GLOBAL_REMOVE_IF_UNREFERENCED CHAR16 *mPciResourceTypeStr[] = { + L"I/O", L"Mem", L"PMem", L"Mem64", L"PMem64", L"Bus" +}; + +/** + + Entry point of this driver. + + @param ImageHandle Image handle of this driver. + @param SystemTable Pointer to standard EFI system table. + + @retval EFI_SUCCESS Succeed. + @retval EFI_DEVICE_ERROR Fail to install PCI_ROOT_BRIDGE_IO protocol. + +**/ +EFI_STATUS +EFIAPI +InitializePciHostBridge ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + PCI_ROOT_BRIDGE *RootBridges; + UINTN RootBridgeCount; + UINTN Index; + PCI_ROOT_BRIDGE_APERTURE *MemApertures[4]; + UINTN MemApertureIndex; + + RootBridges = PciHostBridgeGetRootBridges (&RootBridgeCount); + if ((RootBridges == NULL) || (RootBridgeCount == 0)) { + return EFI_UNSUPPORTED; + } + + Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, (VOID **) &mMetronome); + ASSERT_EFI_ERROR (Status); + Status = gBS->LocateProtocol (&gEfiCpuIo2ProtocolGuid, NULL, (VOID **) &mCpuIo); + ASSERT_EFI_ERROR (Status); + + // + // Most systems in the world including complex servers have only one Host Bridge. + // + HostBridge = AllocateZeroPool (sizeof (PCI_HOST_BRIDGE_INSTANCE)); + ASSERT (HostBridge != NULL); + + HostBridge->Signature = PCI_HOST_BRIDGE_SIGNATURE; + HostBridge->CanRestarted = TRUE; + InitializeListHead (&HostBridge->RootBridges); + + HostBridge->ResAlloc.NotifyPhase = NotifyPhase; + HostBridge->ResAlloc.GetNextRootBridge = GetNextRootBridge; + HostBridge->ResAlloc.GetAllocAttributes = GetAttributes; + HostBridge->ResAlloc.StartBusEnumeration = StartBusEnumeration; + HostBridge->ResAlloc.SetBusNumbers = SetBusNumbers; + HostBridge->ResAlloc.SubmitResources = SubmitResources; + HostBridge->ResAlloc.GetProposedResources = GetProposedResources; + HostBridge->ResAlloc.PreprocessController = PreprocessController; + + Status = gBS->InstallMultipleProtocolInterfaces ( + &HostBridge->Handle, + &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc, + NULL + ); + if (EFI_ERROR (Status)) { + FreePool (HostBridge); + PciHostBridgeFreeRootBridges (RootBridges, RootBridgeCount); + return Status; + } + + // + // Create Root Bridge Device Handle in this Host Bridge + // + for (Index = 0; Index < RootBridgeCount; Index++) { + // + // Create Root Bridge Handle Instance + // + RootBridge = CreateRootBridge (&RootBridges[Index], HostBridge->Handle); + ASSERT (RootBridge != NULL); + if (RootBridge == NULL) { + continue; + } + + if (RootBridges[Index].Io.Limit > RootBridges[Index].Io.Base) { + Status = gDS->AddIoSpace ( + EfiGcdIoTypeIo, + RootBridges[Index].Io.Base, + RootBridges[Index].Io.Limit - RootBridges[Index].Io.Base + 1 + ); + ASSERT_EFI_ERROR (Status); + } + + // + // Add all the Mem/PMem aperture to GCD + // Mem/PMem shouldn't overlap with each other + // Root bridge which needs to combine MEM and PMEM should only report + // the MEM aperture in Mem + // + MemApertures[0] = &RootBridges[Index].Mem; + MemApertures[1] = &RootBridges[Index].MemAbove4G; + MemApertures[2] = &RootBridges[Index].PMem; + MemApertures[3] = &RootBridges[Index].PMemAbove4G; + + for (MemApertureIndex = 0; MemApertureIndex < sizeof (MemApertures) / sizeof (MemApertures[0]); MemApertureIndex++) { + if (MemApertures[MemApertureIndex]->Limit > MemApertures[MemApertureIndex]->Base) { + Status = gDS->AddMemorySpace ( + EfiGcdMemoryTypeMemoryMappedIo, + MemApertures[MemApertureIndex]->Base, + MemApertures[MemApertureIndex]->Limit - MemApertures[MemApertureIndex]->Base + 1, + EFI_MEMORY_UC + ); + ASSERT_EFI_ERROR (Status); + Status = gDS->SetMemorySpaceAttributes ( + MemApertures[MemApertureIndex]->Base, + MemApertures[MemApertureIndex]->Limit - MemApertures[MemApertureIndex]->Base + 1, + EFI_MEMORY_UC + ); + ASSERT_EFI_ERROR (Status); + } + } + // + // Insert Root Bridge Handle Instance + // + Status = gBS->InstallMultipleProtocolInterfaces ( + &RootBridge->Handle, + &gEfiDevicePathProtocolGuid, RootBridge->DevicePath, + &gEfiPciRootBridgeIoProtocolGuid, &RootBridge->RootBridgeIo, + NULL + ); + ASSERT_EFI_ERROR (Status); + InsertTailList (&HostBridge->RootBridges, &RootBridge->Link); + } + PciHostBridgeFreeRootBridges (RootBridges, RootBridgeCount); + return Status; +} + +/** + This routine constructs the resource descriptors for all root bridges and call PciHostBridgeResourceConflict(). + + @param HostBridge The Host Bridge Instance where the resource adjustment happens. +**/ +VOID +ResourceConflict ( + IN PCI_HOST_BRIDGE_INSTANCE *HostBridge + ) +{ + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Resources; + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor; + EFI_ACPI_END_TAG_DESCRIPTOR *End; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + LIST_ENTRY *Link; + UINTN RootBridgeCount; + PCI_RESOURCE_TYPE Index; + PCI_RES_NODE *ResAllocNode; + + RootBridgeCount = 0; + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridgeCount++; + } + + Resources = AllocatePool ( + RootBridgeCount * (TypeMax * sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR)) + + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR) + ); + ASSERT (Resources != NULL); + + for (Link = GetFirstNode (&HostBridge->RootBridges), Descriptor = Resources + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + for (Index = TypeIo; Index < TypeMax; Index++) { + ResAllocNode = &RootBridge->ResAllocNode[Index]; + + Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; + Descriptor->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3; + Descriptor->AddrRangeMin = ResAllocNode->Base; + Descriptor->AddrRangeMax = ResAllocNode->Alignment; + Descriptor->AddrLen = ResAllocNode->Length; + switch (ResAllocNode->Type) { + + case TypeIo: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_IO; + break; + + case TypePMem32: + Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE; + case TypeMem32: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; + Descriptor->AddrSpaceGranularity = 32; + break; + + case TypePMem64: + Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE; + case TypeMem64: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; + Descriptor->AddrSpaceGranularity = 64; + break; + + case TypeBus: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_BUS; + break; + + default: + break; + } + + Descriptor++; + } + // + // Terminate the root bridge resources. + // + End = (EFI_ACPI_END_TAG_DESCRIPTOR *) Descriptor; + End->Desc = ACPI_END_TAG_DESCRIPTOR; + End->Checksum = 0x0; + + Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) (End + 1); + } + // + // Terminate the host bridge resources. + // + End = (EFI_ACPI_END_TAG_DESCRIPTOR *) Descriptor; + End->Desc = ACPI_END_TAG_DESCRIPTOR; + End->Checksum = 0x0; + + DEBUG ((DEBUG_ERROR, "Call PciHostBridgeResourceConflict().\n")); + PciHostBridgeResourceConflict (HostBridge->Handle, Resources); + FreePool (Resources); +} + +UINT64 +AllocateResource ( + BOOLEAN Mmio, + UINT64 Length, + UINTN BitsOfAlignment, + UINT64 BaseAddress, + UINT64 Limit + ) +{ + EFI_STATUS Status; + + if (BaseAddress < Limit) { + // + // Have to make sure Aligment is handled since we are doing direct address allocation + // + BaseAddress = ALIGN_VALUE (BaseAddress, LShiftU64 (1, BitsOfAlignment)); + + while (BaseAddress + Length <= Limit + 1) { + if (Mmio) { + Status = gDS->AllocateMemorySpace ( + EfiGcdAllocateAddress, + EfiGcdMemoryTypeMemoryMappedIo, + BitsOfAlignment, + Length, + &BaseAddress, + gImageHandle, + NULL + ); + } else { + Status = gDS->AllocateIoSpace ( + EfiGcdAllocateAddress, + EfiGcdIoTypeIo, + BitsOfAlignment, + Length, + &BaseAddress, + gImageHandle, + NULL + ); + } + + if (!EFI_ERROR (Status)) { + return BaseAddress; + } + BaseAddress += LShiftU64 (1, BitsOfAlignment); + } + } + return MAX_UINT64; +} +/** + + Enter a certain phase of the PCI enumeration process. + + @param This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. + @param Phase The phase during enumeration. + + @retval EFI_SUCCESS Succeed. + @retval EFI_INVALID_PARAMETER Wrong phase parameter passed in. + @retval EFI_NOT_READY Resources have not been submitted yet. + +**/ +EFI_STATUS +EFIAPI +NotifyPhase ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase + ) +{ + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + LIST_ENTRY *Link; + EFI_PHYSICAL_ADDRESS BaseAddress; + UINT64 AddrLen; + UINTN BitsOfAlignment; + UINT64 Alignment; + EFI_STATUS Status; + EFI_STATUS ReturnStatus; + PCI_RESOURCE_TYPE Index; + PCI_RESOURCE_TYPE Index1; + PCI_RESOURCE_TYPE Index2; + BOOLEAN ResNodeHandled[TypeMax]; + UINT64 MaxAlignment; + + HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This); + + switch (Phase) { + case EfiPciHostBridgeBeginEnumeration: + if (!HostBridge->CanRestarted) { + return EFI_NOT_READY; + } + // + // Reset Root Bridge + // + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + for (Index = TypeIo; Index < TypeMax; Index++) { + RootBridge->ResAllocNode[Index].Type = Index; + RootBridge->ResAllocNode[Index].Base = 0; + RootBridge->ResAllocNode[Index].Length = 0; + RootBridge->ResAllocNode[Index].Status = ResNone; + + RootBridge->ResourceSubmitted = FALSE; + } + } + + HostBridge->CanRestarted = TRUE; + break; + + case EfiPciHostBridgeBeginBusAllocation: + // + // No specific action is required here, can perform any chipset specific programing + // + HostBridge->CanRestarted = FALSE; + break; + + case EfiPciHostBridgeEndBusAllocation: + // + // No specific action is required here, can perform any chipset specific programing + // + break; + + case EfiPciHostBridgeBeginResourceAllocation: + // + // No specific action is required here, can perform any chipset specific programing + // + break; + + case EfiPciHostBridgeAllocateResources: + ReturnStatus = EFI_SUCCESS; + + // + // Make sure the resource for all root bridges has been submitted. + // + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + if (!RootBridge->ResourceSubmitted) { + return EFI_NOT_READY; + } + } + + DEBUG ((EFI_D_INFO, "PciHostBridge: NotifyPhase (AllocateResources)\n")); + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + for (Index = TypeIo; Index < TypeBus; Index++) { + ResNodeHandled[Index] = FALSE; + } + + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + DEBUG ((EFI_D_INFO, " RootBridge: %s\n", RootBridge->DevicePathStr)); + + for (Index1 = TypeIo; Index1 < TypeBus; Index1++) { + if (RootBridge->ResAllocNode[Index1].Status == ResNone) { + ResNodeHandled[Index1] = TRUE; + } else { + // + // Allocate the resource node with max alignment at first + // + MaxAlignment = 0; + Index = TypeMax; + for (Index2 = TypeIo; Index2 < TypeBus; Index2++) { + if (ResNodeHandled[Index2]) { + continue; + } + if (MaxAlignment <= RootBridge->ResAllocNode[Index2].Alignment) { + MaxAlignment = RootBridge->ResAllocNode[Index2].Alignment; + Index = Index2; + } + } + + ASSERT (Index < TypeMax); + ResNodeHandled[Index] = TRUE; + AddrLen = RootBridge->ResAllocNode[Index].Length; + Alignment = RootBridge->ResAllocNode[Index].Alignment; + BitsOfAlignment = LowBitSet64 (Alignment + 1); + BaseAddress = MAX_UINT64; + + switch (Index) { + case TypeIo: + BaseAddress = AllocateResource ( + FALSE, + RootBridge->ResAllocNode[Index].Length, + MIN (15, BitsOfAlignment), + ALIGN_VALUE (RootBridge->Io.Base, Alignment + 1), + RootBridge->Io.Limit + ); + break; + + case TypeMem64: + BaseAddress = AllocateResource ( + TRUE, + RootBridge->ResAllocNode[Index].Length, + MIN (63, BitsOfAlignment), + ALIGN_VALUE (RootBridge->MemAbove4G.Base, Alignment + 1), + RootBridge->MemAbove4G.Limit + ); + if (BaseAddress != MAX_UINT64) { + break; + } + // + // If memory above 4GB is not available, try memory below 4GB + // + + case TypeMem32: + BaseAddress = AllocateResource ( + TRUE, + RootBridge->ResAllocNode[Index].Length, + MIN (31, BitsOfAlignment), + ALIGN_VALUE (RootBridge->Mem.Base, Alignment + 1), + RootBridge->Mem.Limit + ); + break; + + case TypePMem64: + BaseAddress = AllocateResource ( + TRUE, + RootBridge->ResAllocNode[Index].Length, + MIN (63, BitsOfAlignment), + ALIGN_VALUE (RootBridge->PMemAbove4G.Base, Alignment + 1), + RootBridge->PMemAbove4G.Limit + ); + if (BaseAddress != MAX_UINT64) { + break; + } + // + // If memory above 4GB is not available, try memory below 4GB + // + case TypePMem32: + BaseAddress = AllocateResource ( + TRUE, + RootBridge->ResAllocNode[Index].Length, + MIN (31, BitsOfAlignment), + ALIGN_VALUE (RootBridge->PMem.Base, Alignment + 1), + RootBridge->PMem.Limit + ); + break; + + default: + ASSERT (FALSE); + break; + } + + DEBUG ((DEBUG_INFO, " %s: Base/Length/Alignment = %lx/%lx/%lx - ", + mPciResourceTypeStr[Index], BaseAddress, RootBridge->ResAllocNode[Index].Length, Alignment)); + if (BaseAddress != MAX_UINT64) { + RootBridge->ResAllocNode[Index].Base = BaseAddress; + RootBridge->ResAllocNode[Index].Status = ResAllocated; + DEBUG ((DEBUG_INFO, "Success\n")); + } else { + ReturnStatus = EFI_OUT_OF_RESOURCES; + DEBUG ((DEBUG_ERROR, "Out Of Resource!\n")); + } + } + } + } + + if (ReturnStatus == EFI_OUT_OF_RESOURCES) { + ResourceConflict (HostBridge); + } + + // + // Set resource to zero for nodes where allocation fails + // + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + for (Index = TypeIo; Index < TypeBus; Index++) { + if (RootBridge->ResAllocNode[Index].Status != ResAllocated) { + RootBridge->ResAllocNode[Index].Length = 0; + } + } + } + return ReturnStatus; + + case EfiPciHostBridgeSetResources: + // + // HostBridgeInstance->CanRestarted = FALSE; + // + break; + + case EfiPciHostBridgeFreeResources: + // + // HostBridgeInstance->CanRestarted = FALSE; + // + ReturnStatus = EFI_SUCCESS; + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + for (Index = TypeIo; Index < TypeBus; Index++) { + if (RootBridge->ResAllocNode[Index].Status == ResAllocated) { + switch (Index) { + case TypeIo: + Status = gDS->FreeIoSpace (RootBridge->ResAllocNode[Index].Base, RootBridge->ResAllocNode[Index].Length); + if (EFI_ERROR (Status)) { + ReturnStatus = Status; + } + break; + + case TypeMem32: + case TypePMem32: + case TypeMem64: + case TypePMem64: + Status = gDS->FreeMemorySpace (RootBridge->ResAllocNode[Index].Base, RootBridge->ResAllocNode[Index].Length); + if (EFI_ERROR (Status)) { + ReturnStatus = Status; + } + break; + + default: + ASSERT (FALSE); + break; + } + + RootBridge->ResAllocNode[Index].Type = Index; + RootBridge->ResAllocNode[Index].Base = 0; + RootBridge->ResAllocNode[Index].Length = 0; + RootBridge->ResAllocNode[Index].Status = ResNone; + } + } + + RootBridge->ResourceSubmitted = FALSE; + } + + HostBridge->CanRestarted = TRUE; + return ReturnStatus; + + case EfiPciHostBridgeEndResourceAllocation: + // + // The resource allocation phase is completed. No specific action is required + // here. This notification can be used to perform any chipset specific programming. + // + break; + + case EfiPciHostBridgeEndEnumeration: + // + // The Host Bridge Enumeration is completed. No specific action is required here. + // This notification can be used to perform any chipset specific programming. + // + break; + + default: + return EFI_INVALID_PARAMETER; + } + + return EFI_SUCCESS; +} + +/** + + Return the device handle of the next PCI root bridge that is associated with + this Host Bridge. + + @param This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle Returns the device handle of the next PCI Root Bridge. + On input, it holds the RootBridgeHandle returned by the most + recent call to GetNextRootBridge().The handle for the first + PCI Root Bridge is returned if RootBridgeHandle is NULL on input. + + @retval EFI_SUCCESS Succeed. + @retval EFI_NOT_FOUND Next PCI root bridge not found. + @retval EFI_INVALID_PARAMETER Wrong parameter passed in. + +**/ +EFI_STATUS +EFIAPI +GetNextRootBridge ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN OUT EFI_HANDLE *RootBridgeHandle + ) +{ + BOOLEAN ReturnNext; + LIST_ENTRY *Link; + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + + if (RootBridgeHandle == NULL) { + return EFI_INVALID_PARAMETER; + } + + HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This); + ReturnNext = (BOOLEAN) (*RootBridgeHandle == NULL); + + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + if (ReturnNext) { + *RootBridgeHandle = RootBridge->Handle; + return EFI_SUCCESS; + } + + ReturnNext = (BOOLEAN) (*RootBridgeHandle == RootBridge->Handle); + } + + if (ReturnNext) { + ASSERT (IsNull (&HostBridge->RootBridges, Link)); + return EFI_NOT_FOUND; + } else { + return EFI_INVALID_PARAMETER; + } +} + +/** + + Returns the attributes of a PCI Root Bridge. + + @param This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle The device handle of the PCI Root Bridge + that the caller is interested in. + @param Attributes The pointer to attributes of the PCI Root Bridge. + + @retval EFI_SUCCESS Succeed. + @retval EFI_INVALID_PARAMETER Attributes parameter passed in is NULL or + RootBridgeHandle is not an EFI_HANDLE + that was returned on a previous call to + GetNextRootBridge(). + +**/ +EFI_STATUS +EFIAPI +GetAttributes ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + OUT UINT64 *Attributes + ) +{ + LIST_ENTRY *Link; + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + + if (Attributes == NULL) { + return EFI_INVALID_PARAMETER; + } + + HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This); + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + if (RootBridgeHandle == RootBridge->Handle) { + *Attributes = RootBridge->AllocationAttributes; + return EFI_SUCCESS; + } + } + + return EFI_INVALID_PARAMETER; +} + +/** + + This is the request from the PCI enumerator to set up + the specified PCI Root Bridge for bus enumeration process. + + @param This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle The PCI Root Bridge to be set up. + @param Configuration Pointer to the pointer to the PCI bus resource descriptor. + + @retval EFI_SUCCESS Succeed. + @retval EFI_OUT_OF_RESOURCES Not enough pool to be allocated. + @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid handle. + +**/ +EFI_STATUS +EFIAPI +StartBusEnumeration ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + OUT VOID **Configuration + ) +{ + LIST_ENTRY *Link; + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor; + EFI_ACPI_END_TAG_DESCRIPTOR *End; + + if (Configuration == NULL) { + return EFI_INVALID_PARAMETER; + } + + HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This); + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + if (RootBridgeHandle == RootBridge->Handle) { + *Configuration = AllocatePool (sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR)); + if (*Configuration == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) *Configuration; + Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; + Descriptor->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3; + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_BUS; + Descriptor->GenFlag = 0; + Descriptor->SpecificFlag = 0; + Descriptor->AddrSpaceGranularity = 0; + Descriptor->AddrRangeMin = RootBridge->Bus.Base; + Descriptor->AddrRangeMax = 0; + Descriptor->AddrTranslationOffset = 0; + Descriptor->AddrLen = RootBridge->Bus.Limit - RootBridge->Bus.Base + 1; + + End = (EFI_ACPI_END_TAG_DESCRIPTOR *) (Descriptor + 1); + End->Desc = ACPI_END_TAG_DESCRIPTOR; + End->Checksum = 0x0; + + return EFI_SUCCESS; + } + } + + return EFI_INVALID_PARAMETER; +} + +/** + + This function programs the PCI Root Bridge hardware so that + it decodes the specified PCI bus range. + + @param This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed. + @param Configuration The pointer to the PCI bus resource descriptor. + + @retval EFI_SUCCESS Succeed. + @retval EFI_INVALID_PARAMETER Wrong parameters passed in. + +**/ +EFI_STATUS +EFIAPI +SetBusNumbers ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + IN VOID *Configuration + ) +{ + LIST_ENTRY *Link; + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor; + EFI_ACPI_END_TAG_DESCRIPTOR *End; + UINTN BusStart; + UINTN BusEnd; + UINTN BusLen; + + if (Configuration == NULL) { + return EFI_INVALID_PARAMETER; + } + + Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration; + End = (EFI_ACPI_END_TAG_DESCRIPTOR *) (Descriptor + 1); + + // + // Check the Configuration is valid + // + if ((Descriptor->Desc != ACPI_ADDRESS_SPACE_DESCRIPTOR) || + (Descriptor->ResType != ACPI_ADDRESS_SPACE_TYPE_BUS) || + (End->Desc != ACPI_END_TAG_DESCRIPTOR) + ) { + return EFI_INVALID_PARAMETER; + } + + HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This); + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + if (RootBridgeHandle == RootBridge->Handle) { + BusStart = (UINTN) Descriptor->AddrRangeMin; + BusLen = (UINTN) Descriptor->AddrLen; + BusEnd = BusStart + BusLen - 1; + + if (Descriptor->AddrLen == 0) { + return EFI_INVALID_PARAMETER; + } + + if ((Descriptor->AddrRangeMin < RootBridge->Bus.Base) || + (Descriptor->AddrRangeMin + Descriptor->AddrLen - 1 > RootBridge->Bus.Limit) + ) { + return EFI_INVALID_PARAMETER; + } + // + // Update the Bus Range + // + RootBridge->ResAllocNode[TypeBus].Base = Descriptor->AddrRangeMin; + RootBridge->ResAllocNode[TypeBus].Length = Descriptor->AddrLen; + RootBridge->ResAllocNode[TypeBus].Status = ResAllocated; + return EFI_SUCCESS; + } + } + + return EFI_INVALID_PARAMETER; +} + +/** + + Submits the I/O and memory resource requirements for the specified PCI Root Bridge. + + @param This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle The PCI Root Bridge whose I/O and memory resource requirements. + are being submitted. + @param Configuration The pointer to the PCI I/O and PCI memory resource descriptor. + + @retval EFI_SUCCESS Succeed. + @retval EFI_INVALID_PARAMETER Wrong parameters passed in. +**/ +EFI_STATUS +EFIAPI +SubmitResources ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + IN VOID *Configuration + ) +{ + LIST_ENTRY *Link; + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor; + PCI_RESOURCE_TYPE Type; + + // + // Check the input parameter: Configuration + // + if (Configuration == NULL) { + return EFI_INVALID_PARAMETER; + } + + HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This); + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + if (RootBridgeHandle == RootBridge->Handle) { + DEBUG ((EFI_D_INFO, "PciHostBridge: SubmitResources for %s\n", RootBridge->DevicePathStr)); + // + // Check the resource descriptors. + // If the Configuration includes one or more invalid resource descriptors, all the resource + // descriptors are ignored and the function returns EFI_INVALID_PARAMETER. + // + for (Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration; Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR; Descriptor++) { + if (Descriptor->ResType > ACPI_ADDRESS_SPACE_TYPE_BUS) { + return EFI_INVALID_PARAMETER; + } + + DEBUG ((EFI_D_INFO, " %s: Granularity/SpecificFlag = %ld / %02x%s\n", + mAcpiAddressSpaceTypeStr[Descriptor->ResType], Descriptor->AddrSpaceGranularity, Descriptor->SpecificFlag, + (Descriptor->SpecificFlag & EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE) != 0 ? L" (Prefetchable)" : L"" + )); + DEBUG ((EFI_D_INFO, " Length/Alignment = 0x%lx / 0x%lx\n", Descriptor->AddrLen, Descriptor->AddrRangeMax)); + switch (Descriptor->ResType) { + case ACPI_ADDRESS_SPACE_TYPE_MEM: + if (Descriptor->AddrSpaceGranularity != 32 && Descriptor->AddrSpaceGranularity != 64) { + return EFI_INVALID_PARAMETER; + } + if (Descriptor->AddrSpaceGranularity == 32 && Descriptor->AddrLen >= SIZE_4GB) { + return EFI_INVALID_PARAMETER; + } + // + // If the PCI root bridge does not support separate windows for nonprefetchable and + // prefetchable memory, then the PCI bus driver needs to include requests for + // prefetchable memory in the nonprefetchable memory pool. + // + if (((RootBridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM) != 0) && + ((Descriptor->SpecificFlag & EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE) != 0) + ) { + return EFI_INVALID_PARAMETER; + } + case ACPI_ADDRESS_SPACE_TYPE_IO: + // + // Check aligment, it should be of the form 2^n-1 + // + if (GetPowerOfTwo64 (Descriptor->AddrRangeMax + 1) != (Descriptor->AddrRangeMax + 1)) { + return EFI_INVALID_PARAMETER; + } + break; + default: + ASSERT (FALSE); + break; + } + } + if (Descriptor->Desc != ACPI_END_TAG_DESCRIPTOR) { + return EFI_INVALID_PARAMETER; + } + + for (Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration; Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR; Descriptor++) { + if (Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) { + if (Descriptor->AddrSpaceGranularity == 32) { + if ((Descriptor->SpecificFlag & EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE) != 0) { + Type = TypePMem32; + } else { + Type = TypeMem32; + } + } else { + ASSERT (Descriptor->AddrSpaceGranularity == 64); + if ((Descriptor->SpecificFlag & EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE) != 0) { + Type = TypePMem64; + } else { + Type = TypeMem64; + } + } + } else { + ASSERT (Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_IO); + Type = TypeIo; + } + RootBridge->ResAllocNode[Type].Length = Descriptor->AddrLen; + RootBridge->ResAllocNode[Type].Alignment = Descriptor->AddrRangeMax; + RootBridge->ResAllocNode[Type].Status = ResSubmitted; + } + RootBridge->ResourceSubmitted = TRUE; + return EFI_SUCCESS; + } + } + + return EFI_INVALID_PARAMETER; +} + +/** + + This function returns the proposed resource settings for the specified + PCI Root Bridge. + + @param This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle The PCI Root Bridge handle. + @param Configuration The pointer to the pointer to the PCI I/O + and memory resource descriptor. + + @retval EFI_SUCCESS Succeed. + @retval EFI_OUT_OF_RESOURCES Not enough pool to be allocated. + @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid handle. + +**/ +EFI_STATUS +EFIAPI +GetProposedResources ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + OUT VOID **Configuration + ) +{ + LIST_ENTRY *Link; + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + UINTN Index; + UINTN Number; + VOID *Buffer; + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor; + EFI_ACPI_END_TAG_DESCRIPTOR *End; + UINT64 ResStatus; + + HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This); + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + if (RootBridgeHandle == RootBridge->Handle) { + for (Index = 0, Number = 0; Index < TypeBus; Index++) { + if (RootBridge->ResAllocNode[Index].Status != ResNone) { + Number++; + } + } + + Buffer = AllocateZeroPool (Number * sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR)); + if (Buffer == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Descriptor = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Buffer; + for (Index = 0; Index < TypeBus; Index++) { + ResStatus = RootBridge->ResAllocNode[Index].Status; + if (ResStatus != ResNone) { + Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; + Descriptor->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3;; + Descriptor->GenFlag = 0; + Descriptor->AddrRangeMin = RootBridge->ResAllocNode[Index].Base; + Descriptor->AddrRangeMax = 0; + Descriptor->AddrTranslationOffset = (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : PCI_RESOURCE_LESS; + Descriptor->AddrLen = RootBridge->ResAllocNode[Index].Length; + + switch (Index) { + + case TypeIo: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_IO; + break; + + case TypePMem32: + Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE; + case TypeMem32: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; + Descriptor->AddrSpaceGranularity = 32; + break; + + case TypePMem64: + Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE; + case TypeMem64: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; + Descriptor->AddrSpaceGranularity = 64; + break; + } + + Descriptor++; + } + } + End = (EFI_ACPI_END_TAG_DESCRIPTOR *) Descriptor; + End->Desc = ACPI_END_TAG_DESCRIPTOR; + End->Checksum = 0; + + *Configuration = Buffer; + + return EFI_SUCCESS; + } + } + + return EFI_INVALID_PARAMETER; +} + +/** + + This function is called for all the PCI controllers that the PCI + bus driver finds. Can be used to Preprogram the controller. + + @param This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle The PCI Root Bridge handle. + @param PciAddress Address of the controller on the PCI bus. + @param Phase The Phase during resource allocation. + + @retval EFI_SUCCESS Succeed. + @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid handle. + +**/ +EFI_STATUS +EFIAPI +PreprocessController ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, + IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase + ) +{ + LIST_ENTRY *Link; + PCI_HOST_BRIDGE_INSTANCE *HostBridge; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + + if ((UINT32) Phase > EfiPciBeforeResourceCollection) { + return EFI_INVALID_PARAMETER; + } + + HostBridge = PCI_HOST_BRIDGE_FROM_THIS (This); + for (Link = GetFirstNode (&HostBridge->RootBridges) + ; !IsNull (&HostBridge->RootBridges, Link) + ; Link = GetNextNode (&HostBridge->RootBridges, Link) + ) { + RootBridge = ROOT_BRIDGE_FROM_LINK (Link); + if (RootBridgeHandle == RootBridge->Handle) { + return EFI_SUCCESS; + } + } + + return EFI_INVALID_PARAMETER; +} diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h new file mode 100644 index 0000000000..288823c778 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.h @@ -0,0 +1,252 @@ +/** @file + + The Header file of the Pci Host Bridge Driver. + +Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.
+This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _PCI_HOST_BRIDGE_H_ +#define _PCI_HOST_BRIDGE_H_ + + +#include +#include +#include +#include +#include +#include + +#include "PciRootBridge.h" + +#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32 ('p', 'h', 'b', 'g') +typedef struct { + UINTN Signature; + EFI_HANDLE Handle; + LIST_ENTRY RootBridges; + BOOLEAN CanRestarted; + EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc; +} PCI_HOST_BRIDGE_INSTANCE; + +#define PCI_HOST_BRIDGE_FROM_THIS(a) CR (a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE) + +// +// Driver Entry Point +// +/** + + Entry point of this driver. + + @param ImageHandle - Image handle of this driver. + @param SystemTable - Pointer to standard EFI system table. + + @retval EFI_SUCCESS - Succeed. + @retval EFI_DEVICE_ERROR - Fail to install PCI_ROOT_BRIDGE_IO protocol. + +**/ +EFI_STATUS +EFIAPI +InitializePciHostBridge ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ); + +// +// HostBridge Resource Allocation interface +// +/** + + Enter a certain phase of the PCI enumeration process. + + @param This - The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. + @param Phase - The phase during enumeration. + + @retval EFI_SUCCESS - Succeed. + @retval EFI_INVALID_PARAMETER - Wrong phase parameter passed in. + @retval EFI_NOT_READY - Resources have not been submitted yet. + +**/ +EFI_STATUS +EFIAPI +NotifyPhase ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase + ); + +/** + + Return the device handle of the next PCI root bridge that is associated with + this Host Bridge. + + @param This - The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + RootBridgeHandle - Returns the device handle of the next PCI Root Bridge. + On input, it holds the RootBridgeHandle returned by the most + recent call to GetNextRootBridge().The handle for the first + PCI Root Bridge is returned if RootBridgeHandle is NULL on input. + + @retval EFI_SUCCESS - Succeed. + @retval EFI_NOT_FOUND - Next PCI root bridge not found. + @retval EFI_INVALID_PARAMETER - Wrong parameter passed in. + +**/ +EFI_STATUS +EFIAPI +GetNextRootBridge ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN OUT EFI_HANDLE *RootBridgeHandle + ); + +/** + + Returns the attributes of a PCI Root Bridge. + + @param This - The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance + @param RootBridgeHandle - The device handle of the PCI Root Bridge + that the caller is interested in + @param Attributes - The pointer to attributes of the PCI Root Bridge + + @retval EFI_SUCCESS - Succeed. + @retval EFI_INVALID_PARAMETER - Attributes parameter passed in is NULL or + @retval RootBridgeHandle is not an EFI_HANDLE + @retval that was returned on a previous call to + @retval GetNextRootBridge(). + +**/ +EFI_STATUS +EFIAPI +GetAttributes ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + OUT UINT64 *Attributes + ); + +/** + + This is the request from the PCI enumerator to set up + the specified PCI Root Bridge for bus enumeration process. + + @param This - The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle - The PCI Root Bridge to be set up. + @param Configuration - Pointer to the pointer to the PCI bus resource descriptor. + + @retval EFI_SUCCESS - Succeed. + @retval EFI_OUT_OF_RESOURCES - Not enough pool to be allocated. + @retval EFI_INVALID_PARAMETER - RootBridgeHandle is not a valid handle. + +**/ +EFI_STATUS +EFIAPI +StartBusEnumeration ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + OUT VOID **Configuration + ); + +/** + + This function programs the PCI Root Bridge hardware so that + it decodes the specified PCI bus range. + + @param This - The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle - The PCI Root Bridge whose bus range is to be programmed. + @param Configuration - The pointer to the PCI bus resource descriptor. + + @retval EFI_SUCCESS - Succeed. + @retval EFI_INVALID_PARAMETER - Wrong parameters passed in. + +**/ +EFI_STATUS +EFIAPI +SetBusNumbers ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + IN VOID *Configuration + ); + +/** + + Submits the I/O and memory resource requirements for the specified PCI Root Bridge. + + @param This - The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance + @param RootBridgeHandle - The PCI Root Bridge whose I/O and memory resource requirements + are being submitted + @param Configuration - The pointer to the PCI I/O and PCI memory resource descriptor + + @retval EFI_SUCCESS - Succeed. + @retval EFI_INVALID_PARAMETER - Wrong parameters passed in. + +**/ +EFI_STATUS +EFIAPI +SubmitResources ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + IN VOID *Configuration + ); + +/** + + This function returns the proposed resource settings for the specified + PCI Root Bridge. + + @param This - The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle - The PCI Root Bridge handle. + @param Configuration - The pointer to the pointer to the PCI I/O + and memory resource descriptor. + + @retval EFI_SUCCESS - Succeed. + @retval EFI_OUT_OF_RESOURCES - Not enough pool to be allocated. + @retval EFI_INVALID_PARAMETER - RootBridgeHandle is not a valid handle. + +**/ +EFI_STATUS +EFIAPI +GetProposedResources ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + OUT VOID **Configuration + ); + +/** + + This function is called for all the PCI controllers that the PCI + bus driver finds. Can be used to Preprogram the controller. + + @param This - The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. + @param RootBridgeHandle - The PCI Root Bridge handle. + @param PciAddress - Address of the controller on the PCI bus. + @param Phase - The Phase during resource allocation. + + @retval EFI_SUCCESS - Succeed. + @retval EFI_INVALID_PARAMETER - RootBridgeHandle is not a valid handle. + +**/ +EFI_STATUS +EFIAPI +PreprocessController ( + IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, + IN EFI_HANDLE RootBridgeHandle, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, + IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase + ); + +/** + This routine constructs the resource descriptors for all root bridges and call PciHostBridgeResourceConflict(). + + @param HostBridge The Host Bridge Instance where the resource adjustment happens. +**/ +VOID +ResourceConflict ( + IN PCI_HOST_BRIDGE_INSTANCE *HostBridge + ); + +extern EFI_METRONOME_ARCH_PROTOCOL *mMetronome; +extern EFI_CPU_IO2_PROTOCOL *mCpuIo; +#endif diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf new file mode 100644 index 0000000000..ab5d87e1cf --- /dev/null +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf @@ -0,0 +1,55 @@ +## @file +# Generic PCI Host Bridge driver. +# +# Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +## + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = PciHostBridgeDxe + FILE_GUID = 128FB770-5E79-4176-9E51-9BB268A17DD1 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = InitializePciHostBridge + +[Sources] + PciHostBridge.h + PciRootBridge.h + PciHostBridge.c + PciRootBridgeIo.c + PciHostResource.h + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec + +[LibraryClasses] + UefiDriverEntryPoint + UefiBootServicesTableLib + DebugLib + DxeServicesTableLib + DevicePathLib + BaseMemoryLib + BaseLib + PciSegmentLib + PciHostBridgeLib + +[Protocols] + gEfiMetronomeArchProtocolGuid ## CONSUMES + gEfiCpuIo2ProtocolGuid ## CONSUMES + gEfiDevicePathProtocolGuid ## BY_START + gEfiPciRootBridgeIoProtocolGuid ## BY_START + gEfiPciHostBridgeResourceAllocationProtocolGuid ## BY_START + +[Depex] + gEfiCpuIo2ProtocolGuid AND + gEfiMetronomeArchProtocolGuid diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h new file mode 100644 index 0000000000..f35222b634 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h @@ -0,0 +1,47 @@ +/** @file + + The Header file of the Pci Host Bridge Driver. + +Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.
+This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ +#ifndef _PCI_HOST_RESOURCE_H_ +#define _PCI_HOST_RESOURCE_H_ + +#include + +#define PCI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFE + +typedef enum { + TypeIo = 0, + TypeMem32, + TypePMem32, + TypeMem64, + TypePMem64, + TypeBus, + TypeMax +} PCI_RESOURCE_TYPE; + +typedef enum { + ResNone, + ResSubmitted, + ResAllocated, + ResStatusMax +} RES_STATUS; + +typedef struct { + PCI_RESOURCE_TYPE Type; + UINT64 Base; + UINT64 Length; + UINT64 Alignment; + RES_STATUS Status; +} PCI_RES_NODE; + +#endif diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridge.h b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridge.h new file mode 100644 index 0000000000..2915981ea5 --- /dev/null +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridge.h @@ -0,0 +1,568 @@ +/** @file + + The PCI Root Bridge header file. + +Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.
+This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _PCI_ROOT_BRIDGE_H_ +#define _PCI_ROOT_BRIDGE_H_ + +#include +#include +#include + +// +// Driver Consumed Protocol Prototypes +// +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "PciHostResource.h" + + +typedef enum { + IoOperation, + MemOperation, + PciOperation +} OPERATION_TYPE; + +#define MAP_INFO_SIGNATURE SIGNATURE_32 ('_', 'm', 'a', 'p') +typedef struct { + UINT32 Signature; + LIST_ENTRY Link; + EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation; + UINTN NumberOfBytes; + UINTN NumberOfPages; + EFI_PHYSICAL_ADDRESS HostAddress; + EFI_PHYSICAL_ADDRESS MappedHostAddress; +} MAP_INFO; +#define MAP_INFO_FROM_LINK(a) CR (a, MAP_INFO, Link, MAP_INFO_SIGNATURE) + +#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32 ('_', 'p', 'r', 'b') + +typedef struct { + UINT32 Signature; + LIST_ENTRY Link; + EFI_HANDLE Handle; + UINT64 AllocationAttributes; + UINT64 Attributes; + UINT64 Supports; + PCI_RES_NODE ResAllocNode[TypeMax]; + PCI_ROOT_BRIDGE_APERTURE Bus; + PCI_ROOT_BRIDGE_APERTURE Io; + PCI_ROOT_BRIDGE_APERTURE Mem; + PCI_ROOT_BRIDGE_APERTURE PMem; + PCI_ROOT_BRIDGE_APERTURE MemAbove4G; + PCI_ROOT_BRIDGE_APERTURE PMemAbove4G; + BOOLEAN DmaAbove4G; + VOID *ConfigBuffer; + EFI_DEVICE_PATH_PROTOCOL *DevicePath; + CHAR16 *DevicePathStr; + EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL RootBridgeIo; + + BOOLEAN ResourceSubmitted; + LIST_ENTRY Maps; +} PCI_ROOT_BRIDGE_INSTANCE; + +#define ROOT_BRIDGE_FROM_THIS(a) CR (a, PCI_ROOT_BRIDGE_INSTANCE, RootBridgeIo, PCI_ROOT_BRIDGE_SIGNATURE) + +#define ROOT_BRIDGE_FROM_LINK(a) CR (a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE) + +/** + + Construct the Pci Root Bridge Io protocol. + + @param Protocol - Protocol to initialize. + @param HostBridgeHandle - Handle to the HostBridge. + + @retval EFI_SUCCESS - Success. + @retval Others - Fail. + +**/ +PCI_ROOT_BRIDGE_INSTANCE * +CreateRootBridge ( + IN PCI_ROOT_BRIDGE *Bridge, + IN EFI_HANDLE HostBridgeHandle + ); + +// +// Protocol Member Function Prototypes +// +/** + + Poll an address in memory mapped space until an exit condition is met + or a timeout occurs. + + @param This - Pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + @param Width - Width of the memory operation. + @param Address - The base address of the memory operation. + @param Mask - Mask used for polling criteria. + @param Value - Comparison value used for polling exit criteria. + @param Delay - Number of 100ns units to poll. + @param Result - Pointer to the last value read from memory location. + + @retval EFI_SUCCESS - Success. + @retval EFI_INVALID_PARAMETER - Invalid parameter found. + @retval EFI_TIMEOUT - Delay expired before a match occurred. + @retval EFI_OUT_OF_RESOURCES - Fail due to lack of resources. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoPollMem ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINT64 Mask, + IN UINT64 Value, + IN UINT64 Delay, + OUT UINT64 *Result + ) +; + +/** + + Poll an address in I/O space until an exit condition is met + or a timeout occurs. + + @param This - Pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + @param Width - Width of I/O operation. + @param Address - The base address of the I/O operation. + @param Mask - Mask used for polling criteria. + @param Value - Comparison value used for polling exit criteria. + @param Delay - Number of 100ns units to poll. + @param Result - Pointer to the last value read from memory location. + + @retval EFI_SUCCESS - Success. + @retval EFI_INVALID_PARAMETER - Invalid parameter found. + @retval EFI_TIMEOUT - Delay expired before a match occurred. + @retval EFI_OUT_OF_RESOURCES - Fail due to lack of resources. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoPollIo ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINT64 Mask, + IN UINT64 Value, + IN UINT64 Delay, + OUT UINT64 *Result + ) +; + +/** + + Allow read from memory mapped I/O space. + + @param This - Pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + @param Width - The width of memory operation. + @param Address - Base address of the memory operation. + @param Count - Number of memory opeartion to perform. + @param Buffer - The destination buffer to store data. + + @retval EFI_SUCCESS - Success. + @retval EFI_INVALID_PARAMETER - Invalid parameter found. + @retval EFI_OUT_OF_RESOURCES - Fail due to lack of resources. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoMemRead ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN OUT VOID *Buffer + ) +; + +/** + + Allow write to memory mapped I/O space. + + @param This - Pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + @param Width - The width of memory operation. + @param Address - Base address of the memory operation. + @param Count - Number of memory opeartion to perform. + @param Buffer - The source buffer to write data from. + + @retval EFI_SUCCESS - Success. + @retval EFI_INVALID_PARAMETER - Invalid parameter found. + @retval EFI_OUT_OF_RESOURCES - Fail due to lack of resources. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoMemWrite ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN OUT VOID *Buffer + ) +; + +/** + + Enable a PCI driver to read PCI controller registers in the + PCI root bridge I/O space. + + @param This - A pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + @param Width - Signifies the width of the memory operation. + @param UserAddress - The base address of the I/O operation. + @param Count - The number of I/O operations to perform. + @param UserBuffer - The destination buffer to store the results. + + @retval EFI_SUCCESS - The data was read from the PCI root bridge. + @retval EFI_INVALID_PARAMETER - Invalid parameters found. + @retval EFI_OUT_OF_RESOURCES - The request could not be completed due to a lack of + @retval resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoIoRead ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 UserAddress, + IN UINTN Count, + IN OUT VOID *UserBuffer + ) +; + +/** + + Enable a PCI driver to write to PCI controller registers in the + PCI root bridge I/O space. + + @param This - A pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + @param Width - Signifies the width of the memory operation. + @param UserAddress - The base address of the I/O operation. + @param Count - The number of I/O operations to perform. + @param UserBuffer - The source buffer to write data from. + + @retval EFI_SUCCESS - The data was written to the PCI root bridge. + @retval EFI_INVALID_PARAMETER - Invalid parameters found. + @retval EFI_OUT_OF_RESOURCES - The request could not be completed due to a lack of + @retval resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoIoWrite ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 UserAddress, + IN UINTN Count, + IN OUT VOID *UserBuffer + ) +; + +/** + + Copy one region of PCI root bridge memory space to be copied to + another region of PCI root bridge memory space. + + @param This - A pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + @param Width - Signifies the width of the memory operation. + @param DestAddress - Destination address of the memory operation. + @param SrcAddress - Source address of the memory operation. + @param Count - Number of memory operations to perform. + + @retval EFI_SUCCESS - The data was copied successfully. + @retval EFI_INVALID_PARAMETER - Invalid parameters found. + @retval EFI_OUT_OF_RESOURCES - The request could not be completed due to a lack of + @retval resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoCopyMem ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 DestAddress, + IN UINT64 SrcAddress, + IN UINTN Count + ) +; + +/** + + Allows read from PCI configuration space. + + @param This - A pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + @param Width - Signifies the width of the memory operation. + @param Address - The address within the PCI configuration space + for the PCI controller. + @param Count - The number of PCI configuration operations + to perform. + @param Buffer - The destination buffer to store the results. + + @retval EFI_SUCCESS - The data was read from the PCI root bridge. + @retval EFI_INVALID_PARAMETER - Invalid parameters found. + @retval EFI_OUT_OF_RESOURCES - The request could not be completed due to a lack of + @retval resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoPciRead ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN OUT VOID *Buffer + ) +; + +/** + + Allows write to PCI configuration space. + + @param This - A pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + @param Width - Signifies the width of the memory operation. + @param Address - The address within the PCI configuration space + for the PCI controller. + @param Count - The number of PCI configuration operations + to perform. + @param Buffer - The source buffer to get the results. + + @retval EFI_SUCCESS - The data was written to the PCI root bridge. + @retval EFI_INVALID_PARAMETER - Invalid parameters found. + @retval EFI_OUT_OF_RESOURCES - The request could not be completed due to a lack of + @retval resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoPciWrite ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN OUT VOID *Buffer + ) +; + +/** + + Provides the PCI controller-specific address needed to access + system memory for DMA. + + @param This - A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param Operation - Indicate if the bus master is going to read or write + to system memory. + @param HostAddress - The system memory address to map on the PCI controller. + @param NumberOfBytes - On input the number of bytes to map. + On output the number of bytes that were mapped. + @param DeviceAddress - The resulting map address for the bus master PCI + controller to use to access the system memory's HostAddress. + @param Mapping - The value to pass to Unmap() when the bus master DMA + operation is complete. + + @retval EFI_SUCCESS - Success. + @retval EFI_INVALID_PARAMETER - Invalid parameters found. + @retval EFI_UNSUPPORTED - The HostAddress cannot be mapped as a common + @retval buffer. + @retval EFI_DEVICE_ERROR - The System hardware could not map the requested + @retval address. + @retval EFI_OUT_OF_RESOURCES - The request could not be completed due to + @retval lack of resources. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoMap ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, + IN VOID *HostAddress, + IN OUT UINTN *NumberOfBytes, + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, + OUT VOID **Mapping + ) +; + +/** + + Completes the Map() operation and releases any corresponding resources. + + @param This - Pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + Mapping - The value returned from Map() operation. + + @retval EFI_SUCCESS - The range was unmapped successfully. + @retval EFI_INVALID_PARAMETER - Mapping is not a value that was returned + @retval by Map operation. + @retval EFI_DEVICE_ERROR - The data was not committed to the target + @retval system memory. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoUnmap ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN VOID *Mapping + ) +; + +/** + + Allocates pages that are suitable for a common buffer mapping. + + @param This - Pointer to EFI_ROOT_BRIDGE_IO_PROTOCOL instance. + @param Type - Not used and can be ignored. + @param MemoryType - Type of memory to allocate. + @param Pages - Number of pages to allocate. + @param HostAddress - Pointer to store the base system memory address + of the allocated range. + @param Attributes - Requested bit mask of attributes of the allocated + range. + + @retval EFI_SUCCESS - The requested memory range were allocated. + @retval EFI_INVALID_PARAMETER - Invalid parameter found. + @retval EFI_UNSUPPORTED - Attributes is unsupported. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoAllocateBuffer ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_ALLOCATE_TYPE Type, + IN EFI_MEMORY_TYPE MemoryType, + IN UINTN Pages, + OUT VOID **HostAddress, + IN UINT64 Attributes + ) +; + +/** + + Free memory allocated in AllocateBuffer. + + @param This - Pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + instance. + @param Pages - Number of pages to free. + @param HostAddress - The base system memory address of the + allocated range. + + @retval EFI_SUCCESS - Requested memory pages were freed. + @retval EFI_INVALID_PARAMETER - Invalid parameter found. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoFreeBuffer ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN UINTN Pages, + OUT VOID *HostAddress + ) +; + +/** + + Flushes all PCI posted write transactions from a PCI host + bridge to system memory. + + @param This - Pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + + @retval EFI_SUCCESS - PCI posted write transactions were flushed + @retval from PCI host bridge to system memory. + @retval EFI_DEVICE_ERROR - Fail due to hardware error. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoFlush ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This + ) +; + +/** + + Get the attributes that a PCI root bridge supports and + the attributes the PCI root bridge is currently using. + + @param This - Pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + instance. + @param Supports - A pointer to the mask of attributes that + this PCI root bridge supports. + @param Attributes - A pointer to the mask of attributes that + this PCI root bridge is currently using. + @retval EFI_SUCCESS - Success. + @retval EFI_INVALID_PARAMETER - Invalid parameter found. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoGetAttributes ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + OUT UINT64 *Supported, + OUT UINT64 *Attributes + ) +; + +/** + + Sets the attributes for a resource range on a PCI root bridge. + + @param This - Pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + @param Attributes - The mask of attributes to set. + @param ResourceBase - Pointer to the base address of the resource range + to be modified by the attributes specified by Attributes. + @param ResourceLength - Pointer to the length of the resource range to be modified. + + @retval EFI_SUCCESS - Success. + @retval EFI_INVALID_PARAMETER - Invalid parameter found. + @retval EFI_OUT_OF_RESOURCES - Not enough resources to set the attributes upon. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoSetAttributes ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN UINT64 Attributes, + IN OUT UINT64 *ResourceBase, + IN OUT UINT64 *ResourceLength + ) +; + +/** + + Retrieves the current resource settings of this PCI root bridge + in the form of a set of ACPI 2.0 resource descriptor. + + @param This - Pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. + @param Resources - Pointer to the ACPI 2.0 resource descriptor that + describe the current configuration of this PCI root + bridge. + + @retval EFI_SUCCESS - Success. + @retval EFI_UNSUPPORTED - Current configuration of the PCI root bridge + @retval could not be retrieved. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoConfiguration ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + OUT VOID **Resources + ) +; + + +extern EFI_METRONOME_ARCH_PROTOCOL *mMetronome; +extern EFI_CPU_IO2_PROTOCOL *mCpuIo; +#endif diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c new file mode 100644 index 0000000000..79b1da2d7e --- /dev/null +++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c @@ -0,0 +1,1561 @@ +/** @file + + PCI Root Bridge Io Protocol code. + +Copyright (c) 1999 - 2016, Intel Corporation. All rights reserved.
+This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include "PciHostBridge.h" +#include "PciRootBridge.h" +#include "PciHostResource.h" + +#define NO_MAPPING (VOID *) -1 + +// +// Lookup table for increment values based on transfer widths +// +UINT8 mInStride[] = { + 1, // EfiPciWidthUint8 + 2, // EfiPciWidthUint16 + 4, // EfiPciWidthUint32 + 8, // EfiPciWidthUint64 + 0, // EfiPciWidthFifoUint8 + 0, // EfiPciWidthFifoUint16 + 0, // EfiPciWidthFifoUint32 + 0, // EfiPciWidthFifoUint64 + 1, // EfiPciWidthFillUint8 + 2, // EfiPciWidthFillUint16 + 4, // EfiPciWidthFillUint32 + 8 // EfiPciWidthFillUint64 +}; + +// +// Lookup table for increment values based on transfer widths +// +UINT8 mOutStride[] = { + 1, // EfiPciWidthUint8 + 2, // EfiPciWidthUint16 + 4, // EfiPciWidthUint32 + 8, // EfiPciWidthUint64 + 1, // EfiPciWidthFifoUint8 + 2, // EfiPciWidthFifoUint16 + 4, // EfiPciWidthFifoUint32 + 8, // EfiPciWidthFifoUint64 + 0, // EfiPciWidthFillUint8 + 0, // EfiPciWidthFillUint16 + 0, // EfiPciWidthFillUint32 + 0 // EfiPciWidthFillUint64 +}; + +/** + Construct the Pci Root Bridge instance. + + @param Bridge The root bridge instance. + @param HostBridgeHandle Handle to the HostBridge. + + @return The pointer to PCI_ROOT_BRIDGE_INSTANCE just created + or NULL if creation fails. +**/ +PCI_ROOT_BRIDGE_INSTANCE * +CreateRootBridge ( + IN PCI_ROOT_BRIDGE *Bridge, + IN EFI_HANDLE HostBridgeHandle + ) +{ + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + PCI_RESOURCE_TYPE Index; + CHAR16 *DevicePathStr; + + DevicePathStr = NULL; + + DEBUG ((EFI_D_INFO, "RootBridge: ")); + DEBUG ((EFI_D_INFO, "%s\n", DevicePathStr = ConvertDevicePathToText (Bridge->DevicePath, FALSE, FALSE))); + DEBUG ((EFI_D_INFO, "Support/Attr: %lx / %lx\n", Bridge->Supports, Bridge->Attributes)); + DEBUG ((EFI_D_INFO, " DmaAbove4G: %s\n", Bridge->DmaAbove4G ? L"Yes" : L"No")); + DEBUG ((EFI_D_INFO, " AllocAttr: %lx (%s%s)\n", Bridge->AllocationAttributes, + (Bridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM) != 0 ? L"CombineMemPMem " : L"", + (Bridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_MEM64_DECODE) != 0 ? L"Mem64Decode" : L"" + )); + DEBUG ((EFI_D_INFO, " Bus: %lx - %lx\n", Bridge->Bus.Base, Bridge->Bus.Limit)); + DEBUG ((EFI_D_INFO, " Io: %lx - %lx\n", Bridge->Io.Base, Bridge->Io.Limit)); + DEBUG ((EFI_D_INFO, " Mem: %lx - %lx\n", Bridge->Mem.Base, Bridge->Mem.Limit)); + DEBUG ((EFI_D_INFO, " MemAbove4G: %lx - %lx\n", Bridge->MemAbove4G.Base, Bridge->MemAbove4G.Limit)); + DEBUG ((EFI_D_INFO, " PMem: %lx - %lx\n", Bridge->PMem.Base, Bridge->PMem.Limit)); + DEBUG ((EFI_D_INFO, " PMemAbove4G: %lx - %lx\n", Bridge->PMemAbove4G.Base, Bridge->PMemAbove4G.Limit)); + + // + // Make sure Mem and MemAbove4G apertures are valid + // + if (Bridge->Mem.Base < Bridge->Mem.Limit) { + ASSERT (Bridge->Mem.Limit < SIZE_4GB); + if (Bridge->Mem.Limit >= SIZE_4GB) { + return NULL; + } + } + if (Bridge->MemAbove4G.Base < Bridge->MemAbove4G.Limit) { + ASSERT (Bridge->MemAbove4G.Base >= SIZE_4GB); + if (Bridge->MemAbove4G.Base < SIZE_4GB) { + return NULL; + } + } + if (Bridge->PMem.Base < Bridge->PMem.Limit) { + ASSERT (Bridge->PMem.Limit < SIZE_4GB); + if (Bridge->PMem.Limit >= SIZE_4GB) { + return NULL; + } + } + if (Bridge->PMemAbove4G.Base < Bridge->PMemAbove4G.Limit) { + ASSERT (Bridge->PMemAbove4G.Base >= SIZE_4GB); + if (Bridge->PMemAbove4G.Base < SIZE_4GB) { + return NULL; + } + } + + if ((Bridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM) != 0) { + // + // If this bit is set, then the PCI Root Bridge does not + // support separate windows for Non-prefetchable and Prefetchable + // memory. + // + ASSERT (Bridge->PMem.Base >= Bridge->PMem.Limit); + ASSERT (Bridge->PMemAbove4G.Base >= Bridge->PMemAbove4G.Limit); + if ((Bridge->PMem.Base < Bridge->PMem.Limit) || + (Bridge->PMemAbove4G.Base < Bridge->PMemAbove4G.Limit) + ) { + return NULL; + } + } + + if ((Bridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_MEM64_DECODE) == 0) { + // + // If this bit is not set, then the PCI Root Bridge does not support + // 64 bit memory windows. + // + ASSERT (Bridge->MemAbove4G.Base >= Bridge->MemAbove4G.Limit); + ASSERT (Bridge->PMemAbove4G.Base >= Bridge->PMemAbove4G.Limit); + if ((Bridge->MemAbove4G.Base < Bridge->MemAbove4G.Limit) || + (Bridge->PMemAbove4G.Base < Bridge->PMemAbove4G.Limit) + ) { + return NULL; + } + } + + RootBridge = AllocateZeroPool (sizeof (PCI_ROOT_BRIDGE_INSTANCE)); + ASSERT (RootBridge != NULL); + + RootBridge->Signature = PCI_ROOT_BRIDGE_SIGNATURE; + RootBridge->Supports = Bridge->Supports; + RootBridge->Attributes = Bridge->Attributes; + RootBridge->DmaAbove4G = Bridge->DmaAbove4G; + RootBridge->AllocationAttributes = Bridge->AllocationAttributes; + RootBridge->DevicePath = DuplicateDevicePath (Bridge->DevicePath); + RootBridge->DevicePathStr = DevicePathStr; + RootBridge->ConfigBuffer = AllocatePool ( + TypeMax * sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR) + ); + ASSERT (RootBridge->ConfigBuffer != NULL); + InitializeListHead (&RootBridge->Maps); + + CopyMem (&RootBridge->Bus, &Bridge->Bus, sizeof (PCI_ROOT_BRIDGE_APERTURE)); + CopyMem (&RootBridge->Io, &Bridge->Io, sizeof (PCI_ROOT_BRIDGE_APERTURE)); + CopyMem (&RootBridge->Mem, &Bridge->Mem, sizeof (PCI_ROOT_BRIDGE_APERTURE)); + CopyMem (&RootBridge->MemAbove4G, &Bridge->MemAbove4G, sizeof (PCI_ROOT_BRIDGE_APERTURE)); + + + for (Index = TypeIo; Index < TypeMax; Index++) { + RootBridge->ResAllocNode[Index].Type = Index; + RootBridge->ResAllocNode[Index].Base = 0; + RootBridge->ResAllocNode[Index].Length = 0; + RootBridge->ResAllocNode[Index].Status = ResNone; + } + + RootBridge->RootBridgeIo.SegmentNumber = Bridge->Segment; + RootBridge->RootBridgeIo.ParentHandle = HostBridgeHandle; + RootBridge->RootBridgeIo.PollMem = RootBridgeIoPollMem; + RootBridge->RootBridgeIo.PollIo = RootBridgeIoPollIo; + RootBridge->RootBridgeIo.Mem.Read = RootBridgeIoMemRead; + RootBridge->RootBridgeIo.Mem.Write = RootBridgeIoMemWrite; + RootBridge->RootBridgeIo.Io.Read = RootBridgeIoIoRead; + RootBridge->RootBridgeIo.Io.Write = RootBridgeIoIoWrite; + RootBridge->RootBridgeIo.CopyMem = RootBridgeIoCopyMem; + RootBridge->RootBridgeIo.Pci.Read = RootBridgeIoPciRead; + RootBridge->RootBridgeIo.Pci.Write = RootBridgeIoPciWrite; + RootBridge->RootBridgeIo.Map = RootBridgeIoMap; + RootBridge->RootBridgeIo.Unmap = RootBridgeIoUnmap; + RootBridge->RootBridgeIo.AllocateBuffer = RootBridgeIoAllocateBuffer; + RootBridge->RootBridgeIo.FreeBuffer = RootBridgeIoFreeBuffer; + RootBridge->RootBridgeIo.Flush = RootBridgeIoFlush; + RootBridge->RootBridgeIo.GetAttributes = RootBridgeIoGetAttributes; + RootBridge->RootBridgeIo.SetAttributes = RootBridgeIoSetAttributes; + RootBridge->RootBridgeIo.Configuration = RootBridgeIoConfiguration; + + return RootBridge; +} + +/** + Check parameters for IO,MMIO,PCI read/write services of PCI Root Bridge IO. + + The I/O operations are carried out exactly as requested. The caller is + responsible for satisfying any alignment and I/O width restrictions that a PI + System on a platform might require. For example on some platforms, width + requests of EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other + hand, will be handled by the driver. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + + @param[in] OperationType I/O operation type: IO/MMIO/PCI. + + @param[in] Width Signifies the width of the I/O or Memory operation. + + @param[in] Address The base address of the I/O operation. + + @param[in] Count The number of I/O operations to perform. The number + of bytes moved is Width size * Count, starting at + Address. + + @param[in] Buffer For read operations, the destination buffer to + store the results. For write operations, the source + buffer from which to write data. + + @retval EFI_SUCCESS The parameters for this request pass the + checks. + + @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. + + @retval EFI_INVALID_PARAMETER Buffer is NULL. + + @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. + + @retval EFI_UNSUPPORTED The address range specified by Address, Width, + and Count is not valid for this PI system. +**/ +EFI_STATUS +RootBridgeIoCheckParameter ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN OPERATION_TYPE OperationType, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN VOID *Buffer + ) +{ + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr; + UINT64 Base; + UINT64 Limit; + UINT32 Size; + + // + // Check to see if Buffer is NULL + // + if (Buffer == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // Check to see if Width is in the valid range + // + if ((UINT32) Width >= EfiPciWidthMaximum) { + return EFI_INVALID_PARAMETER; + } + + // + // For FIFO type, the target address won't increase during the access, + // so treat Count as 1 + // + if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { + Count = 1; + } + + Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); + Size = 1 << Width; + + // + // Check to see if Address is aligned + // + if ((Address & (Size - 1)) != 0) { + return EFI_UNSUPPORTED; + } + + RootBridge = ROOT_BRIDGE_FROM_THIS (This); + + // + // Check to see if any address associated with this transfer exceeds the + // maximum allowed address. The maximum address implied by the parameters + // passed in is Address + Size * Count. If the following condition is met, + // then the transfer is not supported. + // + // Address + Size * Count > Limit + 1 + // + // Since Limit can be the maximum integer value supported by the CPU and + // Count can also be the maximum integer value supported by the CPU, this + // range check must be adjusted to avoid all oveflow conditions. + // + if (OperationType == IoOperation) { + // + // Allow Legacy IO access + // + if (Address + MultU64x32 (Count, Size) <= 0x1000) { + if ((RootBridge->Attributes & ( + EFI_PCI_ATTRIBUTE_ISA_IO | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO | EFI_PCI_ATTRIBUTE_VGA_IO | + EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO | + EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16 | EFI_PCI_ATTRIBUTE_VGA_IO_16)) != 0) { + return EFI_SUCCESS; + } + } + Base = RootBridge->Io.Base; + Limit = RootBridge->Io.Limit; + } else if (OperationType == MemOperation) { + // + // Allow Legacy MMIO access + // + if ((Address >= 0xA0000) && (Address + MultU64x32 (Count, Size)) <= 0xC0000) { + if ((RootBridge->Attributes & EFI_PCI_ATTRIBUTE_VGA_MEMORY) != 0) { + return EFI_SUCCESS; + } + } + // + // By comparing the Address against Limit we know which range to be used + // for checking + // + if (Address + MultU64x32 (Count, Size) <= RootBridge->Mem.Limit + 1) { + Base = RootBridge->Mem.Base; + Limit = RootBridge->Mem.Limit; + } else { + Base = RootBridge->MemAbove4G.Base; + Limit = RootBridge->MemAbove4G.Limit; + } + } else { + PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address; + if (PciRbAddr->Bus < RootBridge->Bus.Base || + PciRbAddr->Bus > RootBridge->Bus.Limit) { + return EFI_INVALID_PARAMETER; + } + + if (PciRbAddr->Device > PCI_MAX_DEVICE || + PciRbAddr->Function > PCI_MAX_FUNC) { + return EFI_INVALID_PARAMETER; + } + + if (PciRbAddr->ExtendedRegister != 0) { + Address = PciRbAddr->ExtendedRegister; + } else { + Address = PciRbAddr->Register; + } + Base = 0; + Limit = 0xFFF; + } + + if (Address < Base) { + return EFI_INVALID_PARAMETER; + } + + if (Address + MultU64x32 (Count, Size) > Limit + 1) { + return EFI_INVALID_PARAMETER; + } + + return EFI_SUCCESS; +} + +/** + Polls an address in memory mapped I/O space until an exit condition is met, + or a timeout occurs. + + This function provides a standard way to poll a PCI memory location. A PCI + memory read operation is performed at the PCI memory address specified by + Address for the width specified by Width. The result of this PCI memory read + operation is stored in Result. This PCI memory read operation is repeated + until either a timeout of Delay 100 ns units has expired, or (Result & Mask) + is equal to Value. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param[in] Width Signifies the width of the memory operations. + @param[in] Address The base address of the memory operations. The caller + is responsible for aligning Address if required. + @param[in] Mask Mask used for the polling criteria. Bytes above Width + in Mask are ignored. The bits in the bytes below Width + which are zero in Mask are ignored when polling the + memory address. + @param[in] Value The comparison value used for the polling exit + criteria. + @param[in] Delay The number of 100 ns units to poll. Note that timer + available may be of poorer granularity. + @param[out] Result Pointer to the last value read from the memory + location. + + @retval EFI_SUCCESS The last data returned from the access matched + the poll exit criteria. + @retval EFI_INVALID_PARAMETER Width is invalid. + @retval EFI_INVALID_PARAMETER Result is NULL. + @retval EFI_TIMEOUT Delay expired before a match occurred. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a + lack of resources. +**/ + +EFI_STATUS +EFIAPI +RootBridgeIoPollMem ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINT64 Mask, + IN UINT64 Value, + IN UINT64 Delay, + OUT UINT64 *Result + ) +{ + EFI_STATUS Status; + UINT64 NumberOfTicks; + UINT32 Remainder; + + if (Result == NULL) { + return EFI_INVALID_PARAMETER; + } + + if ((UINT32)Width > EfiPciWidthUint64) { + return EFI_INVALID_PARAMETER; + } + + // + // No matter what, always do a single poll. + // + Status = This->Mem.Read (This, Width, Address, 1, Result); + if (EFI_ERROR (Status)) { + return Status; + } + + if ((*Result & Mask) == Value) { + return EFI_SUCCESS; + } + + if (Delay == 0) { + return EFI_SUCCESS; + + } else { + + // + // Determine the proper # of metronome ticks to wait for polling the + // location. The nuber of ticks is Roundup (Delay / + // mMetronome->TickPeriod)+1 + // The "+1" to account for the possibility of the first tick being short + // because we started in the middle of a tick. + // + // BugBug: overriding mMetronome->TickPeriod with UINT32 until Metronome + // protocol definition is updated. + // + NumberOfTicks = DivU64x32Remainder (Delay, (UINT32) mMetronome->TickPeriod, + &Remainder); + if (Remainder != 0) { + NumberOfTicks += 1; + } + NumberOfTicks += 1; + + while (NumberOfTicks != 0) { + + mMetronome->WaitForTick (mMetronome, 1); + + Status = This->Mem.Read (This, Width, Address, 1, Result); + if (EFI_ERROR (Status)) { + return Status; + } + + if ((*Result & Mask) == Value) { + return EFI_SUCCESS; + } + + NumberOfTicks -= 1; + } + } + return EFI_TIMEOUT; +} + +/** + Reads from the I/O space of a PCI Root Bridge. Returns when either the + polling exit criteria is satisfied or after a defined duration. + + This function provides a standard way to poll a PCI I/O location. A PCI I/O + read operation is performed at the PCI I/O address specified by Address for + the width specified by Width. + The result of this PCI I/O read operation is stored in Result. This PCI I/O + read operation is repeated until either a timeout of Delay 100 ns units has + expired, or (Result & Mask) is equal to Value. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param[in] Width Signifies the width of the I/O operations. + @param[in] Address The base address of the I/O operations. The caller is + responsible for aligning Address if required. + @param[in] Mask Mask used for the polling criteria. Bytes above Width in + Mask are ignored. The bits in the bytes below Width + which are zero in Mask are ignored when polling the I/O + address. + @param[in] Value The comparison value used for the polling exit criteria. + @param[in] Delay The number of 100 ns units to poll. Note that timer + available may be of poorer granularity. + @param[out] Result Pointer to the last value read from the memory location. + + @retval EFI_SUCCESS The last data returned from the access matched + the poll exit criteria. + @retval EFI_INVALID_PARAMETER Width is invalid. + @retval EFI_INVALID_PARAMETER Result is NULL. + @retval EFI_TIMEOUT Delay expired before a match occurred. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a + lack of resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoPollIo ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINT64 Mask, + IN UINT64 Value, + IN UINT64 Delay, + OUT UINT64 *Result + ) +{ + EFI_STATUS Status; + UINT64 NumberOfTicks; + UINT32 Remainder; + + // + // No matter what, always do a single poll. + // + + if (Result == NULL) { + return EFI_INVALID_PARAMETER; + } + + if ((UINT32)Width > EfiPciWidthUint64) { + return EFI_INVALID_PARAMETER; + } + + Status = This->Io.Read (This, Width, Address, 1, Result); + if (EFI_ERROR (Status)) { + return Status; + } + if ((*Result & Mask) == Value) { + return EFI_SUCCESS; + } + + if (Delay == 0) { + return EFI_SUCCESS; + + } else { + + // + // Determine the proper # of metronome ticks to wait for polling the + // location. The number of ticks is Roundup (Delay / + // mMetronome->TickPeriod)+1 + // The "+1" to account for the possibility of the first tick being short + // because we started in the middle of a tick. + // + NumberOfTicks = DivU64x32Remainder (Delay, (UINT32)mMetronome->TickPeriod, + &Remainder); + if (Remainder != 0) { + NumberOfTicks += 1; + } + NumberOfTicks += 1; + + while (NumberOfTicks != 0) { + + mMetronome->WaitForTick (mMetronome, 1); + + Status = This->Io.Read (This, Width, Address, 1, Result); + if (EFI_ERROR (Status)) { + return Status; + } + + if ((*Result & Mask) == Value) { + return EFI_SUCCESS; + } + + NumberOfTicks -= 1; + } + } + return EFI_TIMEOUT; +} + +/** + Enables a PCI driver to access PCI controller registers in the PCI root + bridge memory space. + + The Mem.Read(), and Mem.Write() functions enable a driver to access PCI + controller registers in the PCI root bridge memory space. + The memory operations are carried out exactly as requested. The caller is + responsible for satisfying any alignment and memory width restrictions that a + PCI Root Bridge on a platform might require. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param[in] Width Signifies the width of the memory operation. + @param[in] Address The base address of the memory operation. The caller + is responsible for aligning the Address if required. + @param[in] Count The number of memory operations to perform. Bytes + moved is Width size * Count, starting at Address. + @param[out] Buffer For read operations, the destination buffer to store + the results. For write operations, the source buffer + to write data from. + + @retval EFI_SUCCESS The data was read from or written to the PCI + root bridge. + @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a + lack of resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoMemRead ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + OUT VOID *Buffer + ) +{ + EFI_STATUS Status; + + Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, + Count, Buffer); + if (EFI_ERROR (Status)) { + return Status; + } + return mCpuIo->Mem.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer); +} + +/** + Enables a PCI driver to access PCI controller registers in the PCI root + bridge memory space. + + The Mem.Read(), and Mem.Write() functions enable a driver to access PCI + controller registers in the PCI root bridge memory space. + The memory operations are carried out exactly as requested. The caller is + responsible for satisfying any alignment and memory width restrictions that a + PCI Root Bridge on a platform might require. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param[in] Width Signifies the width of the memory operation. + @param[in] Address The base address of the memory operation. The caller + is responsible for aligning the Address if required. + @param[in] Count The number of memory operations to perform. Bytes + moved is Width size * Count, starting at Address. + @param[in] Buffer For read operations, the destination buffer to store + the results. For write operations, the source buffer + to write data from. + + @retval EFI_SUCCESS The data was read from or written to the PCI + root bridge. + @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a + lack of resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoMemWrite ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN VOID *Buffer + ) +{ + EFI_STATUS Status; + + Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, + Count, Buffer); + if (EFI_ERROR (Status)) { + return Status; + } + return mCpuIo->Mem.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer); +} + +/** + Enables a PCI driver to access PCI controller registers in the PCI root + bridge I/O space. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param[in] Width Signifies the width of the memory operations. + @param[in] Address The base address of the I/O operation. The caller is + responsible for aligning the Address if required. + @param[in] Count The number of I/O operations to perform. Bytes moved + is Width size * Count, starting at Address. + @param[out] Buffer For read operations, the destination buffer to store + the results. For write operations, the source buffer + to write data from. + + @retval EFI_SUCCESS The data was read from or written to the PCI + root bridge. + @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a + lack of resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoIoRead ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + OUT VOID *Buffer + ) +{ + EFI_STATUS Status; + Status = RootBridgeIoCheckParameter ( + This, IoOperation, Width, + Address, Count, Buffer + ); + if (EFI_ERROR (Status)) { + return Status; + } + return mCpuIo->Io.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer); +} + +/** + Enables a PCI driver to access PCI controller registers in the PCI root + bridge I/O space. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param[in] Width Signifies the width of the memory operations. + @param[in] Address The base address of the I/O operation. The caller is + responsible for aligning the Address if required. + @param[in] Count The number of I/O operations to perform. Bytes moved + is Width size * Count, starting at Address. + @param[in] Buffer For read operations, the destination buffer to store + the results. For write operations, the source buffer + to write data from. + + @retval EFI_SUCCESS The data was read from or written to the PCI + root bridge. + @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. + @retval EFI_INVALID_PARAMETER Buffer is NULL. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a + lack of resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoIoWrite ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN VOID *Buffer + ) +{ + EFI_STATUS Status; + Status = RootBridgeIoCheckParameter ( + This, IoOperation, Width, + Address, Count, Buffer + ); + if (EFI_ERROR (Status)) { + return Status; + } + return mCpuIo->Io.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer); +} + +/** + Enables a PCI driver to copy one region of PCI root bridge memory space to + another region of PCI root bridge memory space. + + The CopyMem() function enables a PCI driver to copy one region of PCI root + bridge memory space to another region of PCI root bridge memory space. This + is especially useful for video scroll operation on a memory mapped video + buffer. + The memory operations are carried out exactly as requested. The caller is + responsible for satisfying any alignment and memory width restrictions that a + PCI root bridge on a platform might require. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + instance. + @param[in] Width Signifies the width of the memory operations. + @param[in] DestAddress The destination address of the memory operation. The + caller is responsible for aligning the DestAddress if + required. + @param[in] SrcAddress The source address of the memory operation. The caller + is responsible for aligning the SrcAddress if + required. + @param[in] Count The number of memory operations to perform. Bytes + moved is Width size * Count, starting at DestAddress + and SrcAddress. + + @retval EFI_SUCCESS The data was copied from one memory region + to another memory region. + @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a + lack of resources. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoCopyMem ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 DestAddress, + IN UINT64 SrcAddress, + IN UINTN Count + ) +{ + EFI_STATUS Status; + BOOLEAN Forward; + UINTN Stride; + UINTN Index; + UINT64 Result; + + if ((UINT32) Width > EfiPciWidthUint64) { + return EFI_INVALID_PARAMETER; + } + + if (DestAddress == SrcAddress) { + return EFI_SUCCESS; + } + + Stride = (UINTN) (1 << Width); + + Forward = TRUE; + if ((DestAddress > SrcAddress) && + (DestAddress < (SrcAddress + Count * Stride))) { + Forward = FALSE; + SrcAddress = SrcAddress + (Count - 1) * Stride; + DestAddress = DestAddress + (Count - 1) * Stride; + } + + for (Index = 0; Index < Count; Index++) { + Status = RootBridgeIoMemRead ( + This, + Width, + SrcAddress, + 1, + &Result + ); + if (EFI_ERROR (Status)) { + return Status; + } + Status = RootBridgeIoMemWrite ( + This, + Width, + DestAddress, + 1, + &Result + ); + if (EFI_ERROR (Status)) { + return Status; + } + if (Forward) { + SrcAddress += Stride; + DestAddress += Stride; + } else { + SrcAddress -= Stride; + DestAddress -= Stride; + } + } + return EFI_SUCCESS; +} + + +/** + PCI configuration space access. + + @param This A pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + @param Read TRUE indicating it's a read operation. + @param Width Signifies the width of the memory operation. + @param Address The address within the PCI configuration space + for the PCI controller. + @param Count The number of PCI configuration operations + to perform. + @param Buffer The destination buffer to store the results. + + @retval EFI_SUCCESS The data was read/written from/to the PCI root bridge. + @retval EFI_INVALID_PARAMETER Invalid parameters found. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoPciAccess ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN BOOLEAN Read, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN OUT VOID *Buffer + ) +{ + EFI_STATUS Status; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress; + UINT8 *Uint8Buffer; + UINT8 InStride; + UINT8 OutStride; + UINTN Size; + + Status = RootBridgeIoCheckParameter (This, PciOperation, Width, Address, Count, Buffer); + if (EFI_ERROR (Status)) { + return Status; + } + + // + // Read Pci configuration space + // + RootBridge = ROOT_BRIDGE_FROM_THIS (This); + CopyMem (&PciAddress, &Address, sizeof (PciAddress)); + + if (PciAddress.ExtendedRegister == 0) { + PciAddress.ExtendedRegister = PciAddress.Register; + } + + Address = PCI_SEGMENT_LIB_ADDRESS ( + RootBridge->RootBridgeIo.SegmentNumber, + PciAddress.Bus, + PciAddress.Device, + PciAddress.Function, + PciAddress.ExtendedRegister + ); + + // + // Select loop based on the width of the transfer + // + InStride = mInStride[Width]; + OutStride = mOutStride[Width]; + Size = (UINTN) (1 << (Width & 0x03)); + for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { + if (Read) { + PciSegmentReadBuffer (Address, Size, Uint8Buffer); + } else { + PciSegmentWriteBuffer (Address, Size, Uint8Buffer); + } + } + return EFI_SUCCESS; +} + +/** + Allows read from PCI configuration space. + + @param This A pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + @param Width Signifies the width of the memory operation. + @param Address The address within the PCI configuration space + for the PCI controller. + @param Count The number of PCI configuration operations + to perform. + @param Buffer The destination buffer to store the results. + + @retval EFI_SUCCESS The data was read from the PCI root bridge. + @retval EFI_INVALID_PARAMETER Invalid parameters found. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoPciRead ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN OUT VOID *Buffer + ) +{ + return RootBridgeIoPciAccess (This, TRUE, Width, Address, Count, Buffer); +} + +/** + Allows write to PCI configuration space. + + @param This A pointer to EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL + @param Width Signifies the width of the memory operation. + @param Address The address within the PCI configuration space + for the PCI controller. + @param Count The number of PCI configuration operations + to perform. + @param Buffer The source buffer to get the results. + + @retval EFI_SUCCESS The data was written to the PCI root bridge. + @retval EFI_INVALID_PARAMETER Invalid parameters found. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoPciWrite ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, + IN UINT64 Address, + IN UINTN Count, + IN OUT VOID *Buffer + ) +{ + return RootBridgeIoPciAccess (This, FALSE, Width, Address, Count, Buffer); +} + +/** + + Provides the PCI controller-specific address needed to access + system memory for DMA. + + @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param Operation Indicate if the bus master is going to read or write + to system memory. + @param HostAddress The system memory address to map on the PCI controller. + @param NumberOfBytes On input the number of bytes to map. + On output the number of bytes that were mapped. + @param DeviceAddress The resulting map address for the bus master PCI + controller to use to access the system memory's HostAddress. + @param Mapping The value to pass to Unmap() when the bus master DMA + operation is complete. + + @retval EFI_SUCCESS Success. + @retval EFI_INVALID_PARAMETER Invalid parameters found. + @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer. + @retval EFI_DEVICE_ERROR The System hardware could not map the requested address. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to lack of resources. + +**/ +EFI_STATUS +EFIAPI +RootBridgeIoMap ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, + IN VOID *HostAddress, + IN OUT UINTN *NumberOfBytes, + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, + OUT VOID **Mapping + ) +{ + EFI_STATUS Status; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + EFI_PHYSICAL_ADDRESS PhysicalAddress; + MAP_INFO *MapInfo; + + if (HostAddress == NULL || NumberOfBytes == NULL || DeviceAddress == NULL || + Mapping == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // Make sure that Operation is valid + // + if ((UINT32) Operation >= EfiPciOperationMaximum) { + return EFI_INVALID_PARAMETER; + } + + RootBridge = ROOT_BRIDGE_FROM_THIS (This); + + PhysicalAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress; + if (!RootBridge->DmaAbove4G && ((PhysicalAddress + *NumberOfBytes) > SIZE_4GB)) { + // + // If the root bridge can not handle performing DMA above 4GB but + // any part of the DMA transfer being mapped is above 4GB, then + // map the DMA transfer to a buffer below 4GB. + // + + if (Operation == EfiPciOperationBusMasterCommonBuffer || + Operation == EfiPciOperationBusMasterCommonBuffer64) { + // + // Common Buffer operations can not be remapped. If the common buffer + // if above 4GB, then it is not possible to generate a mapping, so return + // an error. + // + return EFI_UNSUPPORTED; + } + + // + // Allocate a MAP_INFO structure to remember the mapping when Unmap() is + // called later. + // + MapInfo = AllocatePool (sizeof (MAP_INFO)); + if (MapInfo == NULL) { + *NumberOfBytes = 0; + return EFI_OUT_OF_RESOURCES; + } + + // + // Initialize the MAP_INFO structure + // + MapInfo->Signature = MAP_INFO_SIGNATURE; + MapInfo->Operation = Operation; + MapInfo->NumberOfBytes = *NumberOfBytes; + MapInfo->NumberOfPages = EFI_SIZE_TO_PAGES (MapInfo->NumberOfBytes); + MapInfo->HostAddress = PhysicalAddress; + MapInfo->MappedHostAddress = SIZE_4GB - 1; + + // + // Allocate a buffer below 4GB to map the transfer to. + // + Status = gBS->AllocatePages ( + AllocateMaxAddress, + EfiBootServicesData, + MapInfo->NumberOfPages, + &MapInfo->MappedHostAddress + ); + if (EFI_ERROR (Status)) { + FreePool (MapInfo); + *NumberOfBytes = 0; + return Status; + } + + // + // If this is a read operation from the Bus Master's point of view, + // then copy the contents of the real buffer into the mapped buffer + // so the Bus Master can read the contents of the real buffer. + // + if (Operation == EfiPciOperationBusMasterRead || + Operation == EfiPciOperationBusMasterRead64) { + CopyMem ( + (VOID *) (UINTN) MapInfo->MappedHostAddress, + (VOID *) (UINTN) MapInfo->HostAddress, + MapInfo->NumberOfBytes + ); + } + + InsertTailList (&RootBridge->Maps, &MapInfo->Link); + + // + // The DeviceAddress is the address of the maped buffer below 4GB + // + *DeviceAddress = MapInfo->MappedHostAddress; + // + // Return a pointer to the MAP_INFO structure in Mapping + // + *Mapping = MapInfo; + } else { + // + // If the root bridge CAN handle performing DMA above 4GB or + // the transfer is below 4GB, so the DeviceAddress is simply the + // HostAddress + // + *DeviceAddress = PhysicalAddress; + *Mapping = NO_MAPPING; + } + + return EFI_SUCCESS; +} + +/** + Completes the Map() operation and releases any corresponding resources. + + The Unmap() function completes the Map() operation and releases any + corresponding resources. + If the operation was an EfiPciOperationBusMasterWrite or + EfiPciOperationBusMasterWrite64, the data is committed to the target system + memory. + Any resources used for the mapping are freed. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param[in] Mapping The mapping value returned from Map(). + + @retval EFI_SUCCESS The range was unmapped. + @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). + @retval EFI_DEVICE_ERROR The data was not committed to the target system memory. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoUnmap ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN VOID *Mapping + ) +{ + MAP_INFO *MapInfo; + LIST_ENTRY *Link; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + + RootBridge = ROOT_BRIDGE_FROM_THIS (This); + // + // See if the Map() operation associated with this Unmap() required a mapping + // buffer. If a mapping buffer was not required, then this function simply + // returns EFI_SUCCESS. + // + if (Mapping == NO_MAPPING) { + return EFI_SUCCESS; + } + + MapInfo = NO_MAPPING; + for (Link = GetFirstNode (&RootBridge->Maps) + ; !IsNull (&RootBridge->Maps, Link) + ; Link = GetNextNode (&RootBridge->Maps, Link) + ) { + MapInfo = MAP_INFO_FROM_LINK (Link); + if (MapInfo == Mapping) { + break; + } + } + // + // Mapping is not a valid value returned by Map() + // + if (MapInfo != Mapping) { + return EFI_INVALID_PARAMETER; + } + RemoveEntryList (&MapInfo->Link); + + // + // If this is a write operation from the Bus Master's point of view, + // then copy the contents of the mapped buffer into the real buffer + // so the processor can read the contents of the real buffer. + // + if (MapInfo->Operation == EfiPciOperationBusMasterWrite || + MapInfo->Operation == EfiPciOperationBusMasterWrite64) { + CopyMem ( + (VOID *) (UINTN) MapInfo->HostAddress, + (VOID *) (UINTN) MapInfo->MappedHostAddress, + MapInfo->NumberOfBytes + ); + } + + // + // Free the mapped buffer and the MAP_INFO structure. + // + gBS->FreePages (MapInfo->MappedHostAddress, MapInfo->NumberOfPages); + FreePool (Mapping); + return EFI_SUCCESS; +} + +/** + Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer + or EfiPciOperationBusMasterCommonBuffer64 mapping. + + @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param Type This parameter is not used and must be ignored. + @param MemoryType The type of memory to allocate, EfiBootServicesData or + EfiRuntimeServicesData. + @param Pages The number of pages to allocate. + @param HostAddress A pointer to store the base system memory address of the + allocated range. + @param Attributes The requested bit mask of attributes for the allocated + range. Only the attributes + EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, + EFI_PCI_ATTRIBUTE_MEMORY_CACHED, and + EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this + function. + + @retval EFI_SUCCESS The requested memory pages were allocated. + @retval EFI_INVALID_PARAMETER MemoryType is invalid. + @retval EFI_INVALID_PARAMETER HostAddress is NULL. + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal + attribute bits are MEMORY_WRITE_COMBINE, + MEMORY_CACHED, and DUAL_ADDRESS_CYCLE. + @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoAllocateBuffer ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN EFI_ALLOCATE_TYPE Type, + IN EFI_MEMORY_TYPE MemoryType, + IN UINTN Pages, + OUT VOID **HostAddress, + IN UINT64 Attributes + ) +{ + EFI_STATUS Status; + EFI_PHYSICAL_ADDRESS PhysicalAddress; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + EFI_ALLOCATE_TYPE AllocateType; + + // + // Validate Attributes + // + if ((Attributes & EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER) != 0) { + return EFI_UNSUPPORTED; + } + + // + // Check for invalid inputs + // + if (HostAddress == NULL) { + return EFI_INVALID_PARAMETER; + } + + // + // The only valid memory types are EfiBootServicesData and + // EfiRuntimeServicesData + // + if (MemoryType != EfiBootServicesData && + MemoryType != EfiRuntimeServicesData) { + return EFI_INVALID_PARAMETER; + } + + RootBridge = ROOT_BRIDGE_FROM_THIS (This); + + AllocateType = AllocateAnyPages; + if (!RootBridge->DmaAbove4G) { + // + // Limit allocations to memory below 4GB + // + AllocateType = AllocateMaxAddress; + PhysicalAddress = (EFI_PHYSICAL_ADDRESS) (SIZE_4GB - 1); + } + Status = gBS->AllocatePages ( + AllocateType, + MemoryType, + Pages, + &PhysicalAddress + ); + if (!EFI_ERROR (Status)) { + *HostAddress = (VOID *) (UINTN) PhysicalAddress; + } + + return Status; +} + +/** + Frees memory that was allocated with AllocateBuffer(). + + The FreeBuffer() function frees memory that was allocated with + AllocateBuffer(). + + @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param Pages The number of pages to free. + @param HostAddress The base system memory address of the allocated range. + + @retval EFI_SUCCESS The requested memory pages were freed. + @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and + Pages was not allocated with AllocateBuffer(). +**/ +EFI_STATUS +EFIAPI +RootBridgeIoFreeBuffer ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN UINTN Pages, + OUT VOID *HostAddress + ) +{ + return gBS->FreePages ((EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress, Pages); +} + +/** + Flushes all PCI posted write transactions from a PCI host bridge to system + memory. + + The Flush() function flushes any PCI posted write transactions from a PCI + host bridge to system memory. Posted write transactions are generated by PCI + bus masters when they perform write transactions to target addresses in + system memory. + This function does not flush posted write transactions from any PCI bridges. + A PCI controller specific action must be taken to guarantee that the posted + write transactions have been flushed from the PCI controller and from all the + PCI bridges into the PCI host bridge. This is typically done with a PCI read + transaction from the PCI controller prior to calling Flush(). + + @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + + @retval EFI_SUCCESS The PCI posted write transactions were flushed + from the PCI host bridge to system memory. + @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed + from the PCI host bridge due to a hardware error. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoFlush ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This + ) +{ + return EFI_SUCCESS; +} + +/** + Gets the attributes that a PCI root bridge supports setting with + SetAttributes(), and the attributes that a PCI root bridge is currently + using. + + The GetAttributes() function returns the mask of attributes that this PCI + root bridge supports and the mask of attributes that the PCI root bridge is + currently using. + + @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param Supported A pointer to the mask of attributes that this PCI root + bridge supports setting with SetAttributes(). + @param Attributes A pointer to the mask of attributes that this PCI root + bridge is currently using. + + @retval EFI_SUCCESS If Supports is not NULL, then the attributes + that the PCI root bridge supports is returned + in Supports. If Attributes is not NULL, then + the attributes that the PCI root bridge is + currently using is returned in Attributes. + @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoGetAttributes ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + OUT UINT64 *Supported, + OUT UINT64 *Attributes + ) +{ + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + + if (Attributes == NULL && Supported == NULL) { + return EFI_INVALID_PARAMETER; + } + + RootBridge = ROOT_BRIDGE_FROM_THIS (This); + // + // Set the return value for Supported and Attributes + // + if (Supported != NULL) { + *Supported = RootBridge->Supports; + } + + if (Attributes != NULL) { + *Attributes = RootBridge->Attributes; + } + + return EFI_SUCCESS; +} + +/** + Sets attributes for a resource range on a PCI root bridge. + + The SetAttributes() function sets the attributes specified in Attributes for + the PCI root bridge on the resource range specified by ResourceBase and + ResourceLength. Since the granularity of setting these attributes may vary + from resource type to resource type, and from platform to platform, the + actual resource range and the one passed in by the caller may differ. As a + result, this function may set the attributes specified by Attributes on a + larger resource range than the caller requested. The actual range is returned + in ResourceBase and ResourceLength. The caller is responsible for verifying + that the actual range for which the attributes were set is acceptable. + + @param This A pointer to the + EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param Attributes The mask of attributes to set. If the + attribute bit MEMORY_WRITE_COMBINE, + MEMORY_CACHED, or MEMORY_DISABLE is set, + then the resource range is specified by + ResourceBase and ResourceLength. If + MEMORY_WRITE_COMBINE, MEMORY_CACHED, and + MEMORY_DISABLE are not set, then + ResourceBase and ResourceLength are ignored, + and may be NULL. + @param ResourceBase A pointer to the base address of the + resource range to be modified by the + attributes specified by Attributes. + @param ResourceLength A pointer to the length of the resource + range to be modified by the attributes + specified by Attributes. + + @retval EFI_SUCCESS The current configuration of this PCI root bridge + was returned in Resources. + @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge + could not be retrieved. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoSetAttributes ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + IN UINT64 Attributes, + IN OUT UINT64 *ResourceBase, + IN OUT UINT64 *ResourceLength + ) +{ + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + + RootBridge = ROOT_BRIDGE_FROM_THIS (This); + + if ((Attributes & (~RootBridge->Supports)) != 0) { + return EFI_UNSUPPORTED; + } + + RootBridge->Attributes = Attributes; + return EFI_SUCCESS; +} + +/** + Retrieves the current resource settings of this PCI root bridge in the form + of a set of ACPI 2.0 resource descriptors. + + There are only two resource descriptor types from the ACPI Specification that + may be used to describe the current resources allocated to a PCI root bridge. + These are the QWORD Address Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), + and the End Tag (ACPI 2.0 Section 6.4.2.8). The QWORD Address Space + Descriptor can describe memory, I/O, and bus number ranges for dynamic or + fixed resources. The configuration of a PCI root bridge is described with one + or more QWORD Address Space Descriptors followed by an End Tag. + + @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. + @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that + describe the current configuration of this PCI root + bridge. The storage for the ACPI 2.0 resource + descriptors is allocated by this function. The + caller must treat the return buffer as read-only + data, and the buffer must not be freed by the + caller. + + @retval EFI_SUCCESS The current configuration of this PCI root bridge + was returned in Resources. + @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge + could not be retrieved. +**/ +EFI_STATUS +EFIAPI +RootBridgeIoConfiguration ( + IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, + OUT VOID **Resources + ) +{ + PCI_RESOURCE_TYPE Index; + PCI_ROOT_BRIDGE_INSTANCE *RootBridge; + PCI_RES_NODE *ResAllocNode; + EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor; + EFI_ACPI_END_TAG_DESCRIPTOR *End; + + // + // Get this instance of the Root Bridge. + // + RootBridge = ROOT_BRIDGE_FROM_THIS (This); + ZeroMem ( + RootBridge->ConfigBuffer, + TypeMax * sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof (EFI_ACPI_END_TAG_DESCRIPTOR) + ); + Descriptor = RootBridge->ConfigBuffer; + for (Index = TypeIo; Index < TypeMax; Index++) { + + ResAllocNode = &RootBridge->ResAllocNode[Index]; + + if (ResAllocNode->Status != ResAllocated) { + continue; + } + + Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR; + Descriptor->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3; + Descriptor->AddrRangeMin = ResAllocNode->Base; + Descriptor->AddrRangeMax = ResAllocNode->Base + ResAllocNode->Length - 1; + Descriptor->AddrLen = ResAllocNode->Length; + switch (ResAllocNode->Type) { + + case TypeIo: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_IO; + break; + + case TypePMem32: + Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE; + case TypeMem32: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; + Descriptor->AddrSpaceGranularity = 32; + break; + + case TypePMem64: + Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE; + case TypeMem64: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM; + Descriptor->AddrSpaceGranularity = 64; + break; + + case TypeBus: + Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_BUS; + break; + + default: + break; + } + + Descriptor++; + } + // + // Terminate the entries. + // + End = (EFI_ACPI_END_TAG_DESCRIPTOR *) Descriptor; + End->Desc = ACPI_END_TAG_DESCRIPTOR; + End->Checksum = 0x0; + + *Resources = RootBridge->ConfigBuffer; + return EFI_SUCCESS; +} diff --git a/MdeModulePkg/MdeModulePkg.dsc b/MdeModulePkg/MdeModulePkg.dsc index 4b093e43a6..94d5f60d6f 100644 --- a/MdeModulePkg/MdeModulePkg.dsc +++ b/MdeModulePkg/MdeModulePkg.dsc @@ -43,6 +43,7 @@ IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf PciCf8Lib|MdePkg/Library/BasePciCf8Lib/BasePciCf8Lib.inf + PciSegmentLib|MdePkg/Library/BasePciSegmentLibPci/BasePciSegmentLibPci.inf CacheMaintenanceLib|MdePkg/Library/BaseCacheMaintenanceLib/BaseCacheMaintenanceLib.inf PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf @@ -209,6 +210,7 @@ MdeModulePkg/Application/HelloWorld/HelloWorld.inf MdeModulePkg/Application/MemoryProfileInfo/MemoryProfileInfo.inf + MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridgeDxe.inf MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf MdeModulePkg/Bus/Pci/IncompatiblePciDeviceSupportDxe/IncompatiblePciDeviceSupportDxe.inf -- 2.39.2