From 205cc663778b5f5ae273065733b8080f64d3f324 Mon Sep 17 00:00:00 2001 From: Dandan Bi Date: Thu, 8 Dec 2016 16:01:15 +0800 Subject: [PATCH 1/1] FatPkg/EnhancedFatDxe: Add comments for functions Cc: Ruiyu Ni Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi Reviewed-by: Ruiyu Ni --- FatPkg/EnhancedFatDxe/Fat.c | 64 +++ FatPkg/EnhancedFatDxe/Fat.h | 804 +++++++++++++++++++++++++++++++++++ FatPkg/EnhancedFatDxe/Info.c | 40 ++ 3 files changed, 908 insertions(+) diff --git a/FatPkg/EnhancedFatDxe/Fat.c b/FatPkg/EnhancedFatDxe/Fat.c index 2e6c089650..e29c64cb03 100644 --- a/FatPkg/EnhancedFatDxe/Fat.c +++ b/FatPkg/EnhancedFatDxe/Fat.c @@ -14,6 +14,17 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "Fat.h" +/** + + Register Driver Binding protocol for this driver. + + @param ImageHandle - Handle for the image of this driver. + @param SystemTable - Pointer to the EFI System Table. + + @retval EFI_SUCCESS - Driver loaded. + @return other - Driver not loaded. + +**/ EFI_STATUS EFIAPI FatEntryPoint ( @@ -21,12 +32,36 @@ FatEntryPoint ( IN EFI_SYSTEM_TABLE *SystemTable ); +/** + + Unload function for this image. Uninstall DriverBinding protocol. + + @param ImageHandle - Handle for the image of this driver. + + @retval EFI_SUCCESS - Driver unloaded successfully. + @return other - Driver can not unloaded. + +**/ EFI_STATUS EFIAPI FatUnload ( IN EFI_HANDLE ImageHandle ); +/** + + Test to see if this driver can add a file system to ControllerHandle. + ControllerHandle must support both Disk IO and Block IO protocols. + + @param This - Protocol instance pointer. + @param ControllerHandle - Handle of device to test. + @param RemainingDevicePath - Not used. + + @retval EFI_SUCCESS - This driver supports this device. + @retval EFI_ALREADY_STARTED - This driver is already running on this device. + @return other - This driver does not support this device. + +**/ EFI_STATUS EFIAPI FatDriverBindingSupported ( @@ -35,6 +70,22 @@ FatDriverBindingSupported ( IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath ); +/** + + Start this driver on ControllerHandle by opening a Block IO and Disk IO + protocol, reading Device Path. Add a Simple File System protocol to + ControllerHandle if the media contains a valid file system. + + @param This - Protocol instance pointer. + @param ControllerHandle - Handle of device to bind driver to. + @param RemainingDevicePath - Not used. + + @retval EFI_SUCCESS - This driver is added to DeviceHandle. + @retval EFI_ALREADY_STARTED - This driver is already running on DeviceHandle. + @retval EFI_OUT_OF_RESOURCES - Can not allocate the memory. + @return other - This driver does not support this device. + +**/ EFI_STATUS EFIAPI FatDriverBindingStart ( @@ -43,6 +94,19 @@ FatDriverBindingStart ( IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath ); +/** + + Stop this driver on ControllerHandle. + + @param This - Protocol instance pointer. + @param ControllerHandle - Handle of device to stop driver on. + @param NumberOfChildren - Not used. + @param ChildHandleBuffer - Not used. + + @retval EFI_SUCCESS - This driver is removed DeviceHandle. + @return other - This driver was not removed from this device. + +**/ EFI_STATUS EFIAPI FatDriverBindingStop ( diff --git a/FatPkg/EnhancedFatDxe/Fat.h b/FatPkg/EnhancedFatDxe/Fat.h index 9490868ea7..83552613bf 100644 --- a/FatPkg/EnhancedFatDxe/Fat.h +++ b/FatPkg/EnhancedFatDxe/Fat.h @@ -702,11 +702,50 @@ FatWriteEx ( // // DiskCache.c // +/** + + Initialize the disk cache according to Volume's FatType. + + @param Volume - FAT file system volume. + + @retval EFI_SUCCESS - The disk cache is successfully initialized. + @retval EFI_OUT_OF_RESOURCES - Not enough memory to allocate disk cache. + +**/ EFI_STATUS FatInitializeDiskCache ( IN FAT_VOLUME *Volume ); +/** + + Read BufferSize bytes from the position of Offset into Buffer, + or write BufferSize bytes from Buffer into the position of Offset. + + Base on the parameter of CACHE_DATA_TYPE, the data access will be divided into + the access of FAT cache (CACHE_FAT) and the access of Data cache (CACHE_DATA): + + 1. Access of FAT cache (CACHE_FAT): Access the data in the FAT cache, if there is cache + page hit, just return the cache page; else update the related cache page and return + the right cache page. + 2. Access of Data cache (CACHE_DATA): + The access data will be divided into UnderRun data, Aligned data and OverRun data; + The UnderRun data and OverRun data will be accessed by the Data cache, + but the Aligned data will be accessed with disk directly. + + @param Volume - FAT file system volume. + @param CacheDataType - The type of cache: CACHE_DATA or CACHE_FAT. + @param IoMode - Indicate the type of disk access. + @param Offset - The starting byte offset to read from. + @param BufferSize - Size of Buffer. + @param Buffer - Buffer containing cache data. + @param Task point to task instance. + + @retval EFI_SUCCESS - The data was accessed correctly. + @retval EFI_MEDIA_CHANGED - The MediaId does not match the current device. + @return Others - An error occurred when accessing cache. + +**/ EFI_STATUS FatAccessCache ( IN FAT_VOLUME *Volume, @@ -718,6 +757,17 @@ FatAccessCache ( IN FAT_TASK *Task ); +/** + + Flush all the dirty cache back, include the FAT cache and the Data cache. + + @param Volume - FAT file system volume. + @param Task point to task instance. + + @retval EFI_SUCCESS - Flush all the dirty cache back successfully + @return other - An error occurred when writing the data into the disk + +**/ EFI_STATUS FatVolumeFlushCache ( IN FAT_VOLUME *Volume, @@ -727,27 +777,83 @@ FatVolumeFlushCache ( // // Flush.c // +/** + + Flush the data associated with an open file. + In this implementation, only last Mod/Access time is updated. + + @param OFile - The open file. + + @retval EFI_SUCCESS - The OFile is flushed successfully. + @return Others - An error occurred when flushing this OFile. + +**/ EFI_STATUS FatOFileFlush ( IN FAT_OFILE *OFile ); +/** + + Check the references of the OFile. + If the OFile (that is checked) is no longer + referenced, then it is freed. + + @param OFile - The OFile to be checked. + + @retval TRUE - The OFile is not referenced and freed. + @retval FALSE - The OFile is kept. + +**/ BOOLEAN FatCheckOFileRef ( IN FAT_OFILE *OFile ); +/** + + Set the OFile and its child OFile with the error Status + + @param OFile - The OFile whose permanent error code is to be set. + @param Status - Error code to be set. + +**/ VOID FatSetVolumeError ( IN FAT_OFILE *OFile, IN EFI_STATUS Status ); +/** + + Close the open file instance. + + @param IFile - Open file instance. + + @retval EFI_SUCCESS - Closed the file successfully. + +**/ EFI_STATUS FatIFileClose ( FAT_IFILE *IFile ); +/** + + Set error status for a specific OFile, reference checking the volume. + If volume is already marked as invalid, and all resources are freed + after reference checking, the file system protocol is uninstalled and + the volume structure is freed. + + @param Volume - the Volume that is to be reference checked and unlocked. + @param OFile - the OFile whose permanent error code is to be set. + @param EfiStatus - error code to be set. + @param Task point to task instance. + + @retval EFI_SUCCESS - Clean up the volume successfully. + @return Others - Cleaning up of the volume is failed. + +**/ EFI_STATUS FatCleanupVolume ( IN FAT_VOLUME *Volume, @@ -759,29 +865,86 @@ FatCleanupVolume ( // // FileSpace.c // +/** + + Shrink the end of the open file base on the file size. + + @param OFile - The open file. + + @retval EFI_SUCCESS - Shrinked sucessfully. + @retval EFI_VOLUME_CORRUPTED - There are errors in the file's clusters. + +**/ EFI_STATUS FatShrinkEof ( IN FAT_OFILE *OFile ); +/** + + Grow the end of the open file base on the NewSizeInBytes. + + @param OFile - The open file. + @param NewSizeInBytes - The new size in bytes of the open file. + + @retval EFI_SUCCESS - The file is grown sucessfully. + @retval EFI_UNSUPPORTED - The file size is larger than 4GB. + @retval EFI_VOLUME_CORRUPTED - There are errors in the files' clusters. + @retval EFI_VOLUME_FULL - The volume is full and can not grow the file. + +**/ EFI_STATUS FatGrowEof ( IN FAT_OFILE *OFile, IN UINT64 NewSizeInBytes ); +/** + + Get the size of directory of the open file. + + @param Volume - The File System Volume. + @param Cluster - The Starting cluster. + + @return The physical size of the file starting at the input cluster, if there is error in the + cluster chain, the return value is 0. + +**/ UINTN FatPhysicalDirSize ( IN FAT_VOLUME *Volume, IN UINTN Cluster ); +/** + + Get the physical size of a file on the disk. + + @param Volume - The file system volume. + @param RealSize - The real size of a file. + + @return The physical size of a file on the disk. + +**/ UINT64 FatPhysicalFileSize ( IN FAT_VOLUME *Volume, IN UINTN RealSize ); +/** + + Seek OFile to requested position, and calculate the number of + consecutive clusters from the position in the file + + @param OFile - The open file. + @param Position - The file's position which will be accessed. + @param PosLimit - The maximum length current reading/writing may access + + @retval EFI_SUCCESS - Set the info successfully. + @retval EFI_VOLUME_CORRUPTED - Cluster chain corrupt. + +**/ EFI_STATUS FatOFilePosition ( IN FAT_OFILE *OFile, @@ -789,6 +952,13 @@ FatOFilePosition ( IN UINTN PosLimit ); +/** + + Update the free cluster info of FatInfoSector of the volume. + + @param Volume - FAT file system volume. + +**/ VOID FatComputeFreeInfo ( IN FAT_VOLUME *Volume @@ -797,6 +967,21 @@ FatComputeFreeInfo ( // // Init.c // +/** + + Allocates volume structure, detects FAT file system, installs protocol, + and initialize cache. + + @param Handle - The handle of parent device. + @param DiskIo - The DiskIo of parent device. + @param DiskIo2 - The DiskIo2 of parent device. + @param BlockIo - The BlockIo of parent devicel + + @retval EFI_SUCCESS - Allocate a new volume successfully. + @retval EFI_OUT_OF_RESOURCES - Can not allocate the memory. + @return Others - Allocating a new volume failed. + +**/ EFI_STATUS FatAllocateVolume ( IN EFI_HANDLE Handle, @@ -805,11 +990,32 @@ FatAllocateVolume ( IN EFI_BLOCK_IO_PROTOCOL *BlockIo ); +/** + + Detects FAT file system on Disk and set relevant fields of Volume. + + @param Volume - The volume structure. + + @retval EFI_SUCCESS - The Fat File System is detected successfully + @retval EFI_UNSUPPORTED - The volume is not FAT file system. + @retval EFI_VOLUME_CORRUPTED - The volume is corrupted. + +**/ EFI_STATUS FatOpenDevice ( IN OUT FAT_VOLUME *Volume ); +/** + + Called by FatDriverBindingStop(), Abandon the volume. + + @param Volume - The volume to be abandoned. + + @retval EFI_SUCCESS - Abandoned the volume successfully. + @return Others - Can not uninstall the protocol interfaces. + +**/ EFI_STATUS FatAbandonVolume ( IN FAT_VOLUME *Volume @@ -818,33 +1024,89 @@ FatAbandonVolume ( // // Misc.c // +/** + + Create the task + + @param IFile - The instance of the open file. + @param Token - A pointer to the token associated with the transaction. + + @return FAT_TASK * - Return the task instance. + +**/ FAT_TASK * FatCreateTask ( FAT_IFILE *IFile, EFI_FILE_IO_TOKEN *Token ); +/** + + Destroy the task. + + @param Task - The task to be destroyed. + +**/ VOID FatDestroyTask ( FAT_TASK *Task ); +/** + + Wait all non-blocking requests complete. + + @param IFile - The instance of the open file. + +**/ VOID FatWaitNonblockingTask ( FAT_IFILE *IFile ); +/** + + Remove the subtask from subtask list. + + @param Subtask - The subtask to be removed. + + @return LIST_ENTRY * - The next node in the list. + +**/ LIST_ENTRY * FatDestroySubtask ( FAT_SUBTASK *Subtask ); +/** + + Execute the task. + + @param IFile - The instance of the open file. + @param Task - The task to be executed. + + @retval EFI_SUCCESS - The task was executed sucessfully. + @return other - An error occurred when executing the task. + +**/ EFI_STATUS FatQueueTask ( IN FAT_IFILE *IFile, IN FAT_TASK *Task ); +/** + + Set the volume as dirty or not. + + @param Volume - FAT file system volume. + @param IoMode - The access mode. + @param DirtyValue - Set the volume as dirty or not. + + @retval EFI_SUCCESS - Set the new FAT entry value sucessfully. + @return other - An error occurred when operation the FAT entries. + +**/ EFI_STATUS FatAccessVolumeDirty ( IN FAT_VOLUME *Volume, @@ -852,6 +1114,22 @@ FatAccessVolumeDirty ( IN VOID *DirtyValue ); +/** + + General disk access function. + + @param Volume - FAT file system volume. + @param IoMode - The access mode (disk read/write or cache access). + @param Offset - The starting byte offset to read from. + @param BufferSize - Size of Buffer. + @param Buffer - Buffer containing read data. + @param Task point to task instance. + + @retval EFI_SUCCESS - The operation is performed successfully. + @retval EFI_VOLUME_CORRUPTED - The accesss is + @return Others - The status of read/write the disk + +**/ EFI_STATUS FatDiskIo ( IN FAT_VOLUME *Volume, @@ -862,48 +1140,115 @@ FatDiskIo ( IN FAT_TASK *Task ); +/** + + Lock the volume. + +**/ VOID FatAcquireLock ( VOID ); +/** + + Unlock the volume. + +**/ VOID FatReleaseLock ( VOID ); +/** + + Lock the volume. + If the lock is already in the acquired state, then EFI_ACCESS_DENIED is returned. + Otherwise, EFI_SUCCESS is returned. + + @retval EFI_SUCCESS - The volume is locked. + @retval EFI_ACCESS_DENIED - The volume could not be locked because it is already locked. + +**/ EFI_STATUS FatAcquireLockOrFail ( VOID ); +/** + + Free directory entry. + + @param DirEnt - The directory entry to be freed. + +**/ VOID FatFreeDirEnt ( IN FAT_DIRENT *DirEnt ); +/** + + Free volume structure (including the contents of directory cache and disk cache). + + @param Volume - The volume structure to be freed. + +**/ VOID FatFreeVolume ( IN FAT_VOLUME *Volume ); +/** + + Translate EFI time to FAT time. + + @param ETime - The time of EFI_TIME. + @param FTime - The time of FAT_DATE_TIME. + +**/ VOID FatEfiTimeToFatTime ( IN EFI_TIME *ETime, OUT FAT_DATE_TIME *FTime ); +/** + + Translate Fat time to EFI time. + + @param FTime - The time of FAT_DATE_TIME. + @param ETime - The time of EFI_TIME.. + +**/ VOID FatFatTimeToEfiTime ( IN FAT_DATE_TIME *FTime, OUT EFI_TIME *ETime ); +/** + + Get Current FAT time. + + @param FatTime - Current FAT time. + +**/ VOID FatGetCurrentFatTime ( OUT FAT_DATE_TIME *FatTime ); +/** + + Check whether a time is valid. + + @param Time - The time of EFI_TIME. + + @retval TRUE - The time is valid. + @retval FALSE - The time is not valid. + +**/ BOOLEAN FatIsValidTime ( IN EFI_TIME *Time @@ -912,11 +1257,34 @@ FatIsValidTime ( // // UnicodeCollation.c // +/** + Initialize Unicode Collation support. + + It tries to locate Unicode Collation 2 protocol and matches it with current + platform language code. If for any reason the first attempt fails, it then tries to + use Unicode Collation Protocol. + + @param AgentHandle The handle used to open Unicode Collation (2) protocol. + + @retval EFI_SUCCESS The Unicode Collation (2) protocol has been successfully located. + @retval Others The Unicode Collation (2) protocol has not been located. + +**/ EFI_STATUS InitializeUnicodeCollationSupport ( IN EFI_HANDLE AgentHandle ); +/** + Convert FAT string to unicode string. + + @param FatSize The size of FAT string. + @param Fat The FAT string. + @param String The unicode string. + + @return None. + +**/ VOID FatFatToStr ( IN UINTN FatSize, @@ -924,6 +1292,17 @@ FatFatToStr ( OUT CHAR16 *String ); +/** + Convert unicode string to Fat string. + + @param String The unicode string. + @param FatSize The size of the FAT string. + @param Fat The FAT string. + + @retval TRUE Convert successfully. + @retval FALSE Convert error. + +**/ BOOLEAN FatStrToFat ( IN CHAR16 *String, @@ -931,16 +1310,38 @@ FatStrToFat ( OUT CHAR8 *Fat ); +/** + Lowercase a string + + @param Str The string which will be lower-cased. + +**/ VOID FatStrLwr ( IN CHAR16 *Str ); +/** + Uppercase a string. + + @param Str The string which will be upper-cased. + +**/ VOID FatStrUpr ( IN CHAR16 *Str ); +/** + Performs a case-insensitive comparison of two Null-terminated Unicode strings. + + @param Str1 A pointer to a Null-terminated Unicode string. + @param Str2 A pointer to a Null-terminated Unicode string. + + @retval 0 S1 is equivalent to S2. + @retval >0 S1 is lexically greater than S2. + @retval <0 S1 is lexically less than S2. +**/ INTN FatStriCmp ( IN CHAR16 *Str1, @@ -950,6 +1351,29 @@ FatStriCmp ( // // Open.c // + +/** + + Open a file for a file name relative to an existing OFile. + The IFile of the newly opened file is passed out. + + @param OFile - The file that serves as a starting reference point. + @param NewIFile - The newly generated IFile instance. + @param FileName - The file name relative to the OFile. + @param OpenMode - Open mode. + @param Attributes - Attributes to set if the file is created. + + + @retval EFI_SUCCESS - Open the file successfully. + @retval EFI_INVALID_PARAMETER - The open mode is conflict with the attributes + or the file name is not valid. + @retval EFI_NOT_FOUND - Conficts between dir intention and attribute. + @retval EFI_WRITE_PROTECTED - Can't open for write if the volume is read only. + @retval EFI_ACCESS_DENIED - If the file's attribute is read only, and the + open is for read-write fail it. + @retval EFI_OUT_OF_RESOURCES - Can not allocate the memory. + +**/ EFI_STATUS FatOFileOpen ( IN FAT_OFILE *OFile, @@ -959,6 +1383,18 @@ FatOFileOpen ( IN UINT8 Attributes ); +/** + + Create an Open instance for the existing OFile. + The IFile of the newly opened file is passed out. + + @param OFile - The file that serves as a starting reference point. + @param PtrIFile - The newly generated IFile instance. + + @retval EFI_OUT_OF_RESOURCES - Can not allocate the memory for the IFile + @retval EFI_SUCCESS - Create the new IFile for the OFile successfully + +**/ EFI_STATUS FatAllocateIFile ( IN FAT_OFILE *OFile, @@ -968,6 +1404,18 @@ FatAllocateIFile ( // // OpenVolume.c // +/** + + Implements Simple File System Protocol interface function OpenVolume(). + + @param This - Calling context. + @param File - the Root Directory of the volume. + + @retval EFI_OUT_OF_RESOURCES - Can not allocate the memory. + @retval EFI_VOLUME_CORRUPTED - The FAT type is error. + @retval EFI_SUCCESS - Open the volume successfully. + +**/ EFI_STATUS EFIAPI FatOpenVolume ( @@ -978,6 +1426,22 @@ FatOpenVolume ( // // ReadWrite.c // +/** + + This function reads data from a file or writes data to a file. + It uses OFile->PosRem to determine how much data can be accessed in one time. + + @param OFile - The open file. + @param IoMode - Indicate whether the access mode is reading or writing. + @param Position - The position where data will be accessed. + @param DataBufferSize - Size of Buffer. + @param UserBuffer - Buffer containing data. + @param Task point to task instance. + + @retval EFI_SUCCESS - Access the data successfully. + @return other - An error occurred when operating on the disk. + +**/ EFI_STATUS FatAccessOFile ( IN FAT_OFILE *OFile, @@ -988,18 +1452,52 @@ FatAccessOFile ( IN FAT_TASK *Task ); +/** + + Expand OFile by appending zero bytes at the end of OFile. + + @param OFile - The open file. + @param ExpandedSize - The number of zero bytes appended at the end of the file. + + @retval EFI_SUCCESS - The file is expanded successfully. + @return other - An error occurred when expanding file. + +**/ EFI_STATUS FatExpandOFile ( IN FAT_OFILE *OFile, IN UINT64 ExpandedSize ); +/** + + Write zero pool from the WritePos to the end of OFile. + + @param OFile - The open file to write zero pool. + @param WritePos - The number of zero bytes written. + + @retval EFI_SUCCESS - Write the zero pool successfully. + @retval EFI_OUT_OF_RESOURCES - Not enough memory to perform the operation. + @return other - An error occurred when writing disk. + +**/ EFI_STATUS FatWriteZeroPool ( IN FAT_OFILE *OFile, IN UINTN WritePos ); +/** + + Truncate the OFile to smaller file size. + + @param OFile - The open file. + @param TruncatedSize - The new file size. + + @retval EFI_SUCCESS - The file is truncated successfully. + @return other - An error occurred when truncating file. + +**/ EFI_STATUS FatTruncateOFile ( IN FAT_OFILE *OFile, @@ -1009,29 +1507,83 @@ FatTruncateOFile ( // // DirectoryManage.c // +/** + + Set the OFile's current directory cursor to the list head. + + @param OFile - The directory OFile whose directory cursor is reset. + +**/ VOID FatResetODirCursor ( IN FAT_OFILE *OFile ); +/** + + Set the directory's cursor to the next and get the next directory entry. + + @param OFile - The parent OFile. + @param PtrDirEnt - The next directory entry. + + @retval EFI_SUCCESS - We get the next directory entry successfully. + @return other - An error occurred when get next directory entry. + +**/ EFI_STATUS FatGetNextDirEnt ( IN FAT_OFILE *OFile, OUT FAT_DIRENT **PtrDirEnt ); +/** + + Remove this directory entry node from the list of directory entries and hash table. + + @param OFile - The parent OFile. + @param DirEnt - The directory entry to be removed. + + @retval EFI_SUCCESS - The directory entry is successfully removed. + @return other - An error occurred when removing the directory entry. + +**/ EFI_STATUS FatRemoveDirEnt ( IN FAT_OFILE *OFile, IN FAT_DIRENT *DirEnt ); +/** + + Save the directory entry to disk. + + @param OFile - The parent OFile which needs to update. + @param DirEnt - The directory entry to be saved. + + @retval EFI_SUCCESS - Store the directory entry successfully. + @return other - An error occurred when writing the directory entry. + +**/ EFI_STATUS FatStoreDirEnt ( IN FAT_OFILE *OFile, IN FAT_DIRENT *DirEnt ); +/** + + Create a directory entry in the parent OFile. + + @param OFile - The parent OFile. + @param FileName - The filename of the newly-created directory entry. + @param Attributes - The attribute of the newly-created directory entry. + @param PtrDirEnt - The pointer to the newly-created directory entry. + + @retval EFI_SUCCESS - The directory entry is successfully created. + @retval EFI_OUT_OF_RESOURCES - Not enough memory to create the directory entry. + @return other - An error occurred when creating the directory entry. + +**/ EFI_STATUS FatCreateDirEnt ( IN FAT_OFILE *OFile, @@ -1040,22 +1592,60 @@ FatCreateDirEnt ( OUT FAT_DIRENT **PtrDirEnt ); +/** + + Determine whether the directory entry is "." or ".." entry. + + @param DirEnt - The corresponding directory entry. + + @retval TRUE - The directory entry is "." or ".." directory entry + @retval FALSE - The directory entry is not "." or ".." directory entry + +**/ BOOLEAN FatIsDotDirEnt ( IN FAT_DIRENT *DirEnt ); +/** + + Set the OFile's cluster and size info in its directory entry. + + @param OFile - The corresponding OFile. + +**/ VOID FatUpdateDirEntClusterSizeInfo ( IN FAT_OFILE *OFile ); +/** + + Copy all the information of DirEnt2 to DirEnt1 except for 8.3 name. + + @param DirEnt1 - The destination directory entry. + @param DirEnt2 - The source directory entry. + +**/ VOID FatCloneDirEnt ( IN FAT_DIRENT *DirEnt1, IN FAT_DIRENT *DirEnt2 ); +/** + + Get the directory entry's info into Buffer. + + @param Volume - FAT file system volume. + @param DirEnt - The corresponding directory entry. + @param BufferSize - Size of Buffer. + @param Buffer - Buffer containing file info. + + @retval EFI_SUCCESS - Get the file info successfully. + @retval EFI_BUFFER_TOO_SMALL - The buffer is too small. + +**/ EFI_STATUS FatGetDirEntInfo ( IN FAT_VOLUME *Volume, @@ -1064,22 +1654,71 @@ FatGetDirEntInfo ( OUT VOID *Buffer ); +/** + + Open the directory entry to get the OFile. + + @param Parent - The parent OFile. + @param DirEnt - The directory entry to be opened. + + @retval EFI_SUCCESS - The directory entry is successfully opened. + @retval EFI_OUT_OF_RESOURCES - not enough memory to allocate a new OFile. + @return other - An error occurred when opening the directory entry. + +**/ EFI_STATUS FatOpenDirEnt ( IN FAT_OFILE *OFile, IN FAT_DIRENT *DirEnt ); +/** + + Create "." and ".." directory entries in the newly-created parent OFile. + + @param OFile - The parent OFile. + + @retval EFI_SUCCESS - The dot directory entries are successfully created. + @return other - An error occurred when creating the directory entry. + +**/ EFI_STATUS FatCreateDotDirEnts ( IN FAT_OFILE *OFile ); +/** + + Close the directory entry and free the OFile. + + @param DirEnt - The directory entry to be closed. + +**/ VOID FatCloseDirEnt ( IN FAT_DIRENT *DirEnt ); +/** + + Traverse filename and open all OFiles that can be opened. + Update filename pointer to the component that can't be opened. + If more than one name component remains, returns an error; + otherwise, return the remaining name component so that the caller might choose to create it. + + @param PtrOFile - As input, the reference OFile; as output, the located OFile. + @param FileName - The file name relevant to the OFile. + @param Attributes - The attribute of the destination OFile. + @param NewFileName - The remaining file name. + + @retval EFI_NOT_FOUND - The file name can't be opened and there is more than one + components within the name left (this means the name can + not be created either). + @retval EFI_INVALID_PARAMETER - The parameter is not valid. + @retval EFI_SUCCESS - Open the file successfully. + @return other - An error occured when locating the OFile. + +**/ EFI_STATUS FatLocateOFile ( IN OUT FAT_OFILE **PtrOFile, @@ -1088,12 +1727,35 @@ FatLocateOFile ( OUT CHAR16 *NewFileName ); +/** + + Get the directory entry for the volume. + + @param Volume - FAT file system volume. + @param Name - The file name of the volume. + + @retval EFI_SUCCESS - Update the volume with the directory entry sucessfully. + @return others - An error occurred when getting volume label. + +**/ EFI_STATUS FatGetVolumeEntry ( IN FAT_VOLUME *Volume, IN CHAR16 *Name ); +/** + + Set the relevant directory entry into disk for the volume. + + @param Volume - FAT file system volume. + @param Name - The new file name of the volume. + + @retval EFI_SUCCESS - Update the Volume sucessfully. + @retval EFI_UNSUPPORTED - The input label is not a valid volume label. + @return other - An error occurred when setting volume label. + +**/ EFI_STATUS FatSetVolumeEntry ( IN FAT_VOLUME *Volume, @@ -1103,24 +1765,60 @@ FatSetVolumeEntry ( // // Hash.c // +/** + + Search the long name hash table for the directory entry. + + @param ODir - The directory to be searched. + @param LongNameString - The long name string to search. + + @return The previous long name hash node of the directory entry. + +**/ FAT_DIRENT ** FatLongNameHashSearch ( IN FAT_ODIR *ODir, IN CHAR16 *LongNameString ); +/** + + Search the short name hash table for the directory entry. + + @param ODir - The directory to be searched. + @param ShortNameString - The short name string to search. + + @return The previous short name hash node of the directory entry. + +**/ FAT_DIRENT ** FatShortNameHashSearch ( IN FAT_ODIR *ODir, IN CHAR8 *ShortNameString ); +/** + + Insert directory entry to hash table. + + @param ODir - The parent directory. + @param DirEnt - The directory entry node. + +**/ VOID FatInsertToHashTable ( IN FAT_ODIR *ODir, IN FAT_DIRENT *DirEnt ); +/** + + Delete directory entry from hash table. + + @param ODir - The parent directory. + @param DirEnt - The directory entry node. + +**/ VOID FatDeleteFromHashTable ( IN FAT_ODIR *ODir, @@ -1130,18 +1828,50 @@ FatDeleteFromHashTable ( // // FileName.c // +/** + + This function checks whether the input FileName is a valid 8.3 short name. + If the input FileName is a valid 8.3, the output is the 8.3 short name; + otherwise, the output is the base tag of 8.3 short name. + + @param FileName - The input unicode filename. + @param File8Dot3Name - The output ascii 8.3 short name or base tag of 8.3 short name. + + @retval TRUE - The input unicode filename is a valid 8.3 short name. + @retval FALSE - The input unicode filename is not a valid 8.3 short name. + +**/ BOOLEAN FatCheckIs8Dot3Name ( IN CHAR16 *FileName, OUT CHAR8 *File8Dot3Name ); +/** + + This function generates 8Dot3 name from user specified name for a newly created file. + + @param Parent - The parent directory. + @param DirEnt - The directory entry whose 8Dot3Name needs to be generated. + +**/ VOID FatCreate8Dot3Name ( IN FAT_OFILE *Parent, IN FAT_DIRENT *DirEnt ); +/** + + Convert the ascii fat name to the unicode string and strip trailing spaces, + and if necessary, convert the unicode string to lower case. + + @param FatName - The Char8 string needs to be converted. + @param Len - The length of the fat name. + @param LowerCase - Indicate whether to convert the string to lower case. + @param Str - The result of the convertion. + +**/ VOID FatNameToStr ( IN CHAR8 *FatName, @@ -1150,11 +1880,27 @@ FatNameToStr ( IN CHAR16 *Str ); +/** + + Set the caseflag value for the directory entry. + + @param DirEnt - The logical directory entry whose caseflag value is to be set. + +**/ VOID FatSetCaseFlag ( IN FAT_DIRENT *DirEnt ); +/** + + Convert the 8.3 ASCII fat name to cased Unicode string according to case flag. + + @param DirEnt - The corresponding directory entry. + @param FileString - The output Unicode file name. + @param FileStringMax The max length of FileString. + +**/ VOID FatGetFileNameViaCaseFlag ( IN FAT_DIRENT *DirEnt, @@ -1162,17 +1908,51 @@ FatGetFileNameViaCaseFlag ( IN UINTN FileStringMax ); +/** + + Get the Check sum for a short name. + + @param ShortNameString - The short name for a file. + + @retval Sum - UINT8 checksum. + +**/ UINT8 FatCheckSum ( IN CHAR8 *ShortNameString ); +/** + + Takes Path as input, returns the next name component + in Name, and returns the position after Name (e.g., the + start of the next name component) + + @param Path - The path of one file. + @param Name - The next name component in Path. + + The position after Name in the Path + +**/ CHAR16* FatGetNextNameComponent ( IN CHAR16 *Path, OUT CHAR16 *Name ); +/** + + Check whether the IFileName is valid long file name. If the IFileName is a valid + long file name, then we trim the possible leading blanks and leading/trailing dots. + the trimmed filename is stored in OutputFileName + + @param InputFileName - The input file name. + @param OutputFileName - The output file name. + + @retval TRUE - The InputFileName is a valid long file name. + @retval FALSE - The InputFileName is not a valid long file name. + +**/ BOOLEAN FatFileNameIsValid ( IN CHAR16 *InputFileName, @@ -1182,16 +1962,40 @@ FatFileNameIsValid ( // // DirectoryCache.c // +/** + + Discard the directory structure when an OFile will be freed. + Volume will cache this directory if the OFile does not represent a deleted file. + + @param OFile - The OFile whose directory structure is to be discarded. + +**/ VOID FatDiscardODir ( IN FAT_OFILE *OFile ); +/** + + Request the directory structure when an OFile is newly generated. + If the directory structure is cached by volume, then just return this directory; + Otherwise, allocate a new one for OFile. + + @param OFile - The OFile which requests directory structure. + +**/ VOID FatRequestODir ( IN FAT_OFILE *OFile ); +/** + + Clean up all the cached directory structures when the volume is going to be abandoned. + + @param Volume - FAT file system volume. + +**/ VOID FatCleanupODirCache ( IN FAT_VOLUME *Volume diff --git a/FatPkg/EnhancedFatDxe/Info.c b/FatPkg/EnhancedFatDxe/Info.c index 1a7f8280ba..50b840b961 100644 --- a/FatPkg/EnhancedFatDxe/Info.c +++ b/FatPkg/EnhancedFatDxe/Info.c @@ -16,6 +16,18 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. #include "Fat.h" +/** + + Get the volume's info into Buffer. + + @param Volume - FAT file system volume. + @param BufferSize - Size of Buffer. + @param Buffer - Buffer containing volume info. + + @retval EFI_SUCCESS - Get the volume info successfully. + @retval EFI_BUFFER_TOO_SMALL - The buffer is too small. + +**/ EFI_STATUS FatGetVolumeInfo ( IN FAT_VOLUME *Volume, @@ -23,6 +35,20 @@ FatGetVolumeInfo ( OUT VOID *Buffer ); +/** + + Set the volume's info. + + @param Volume - FAT file system volume. + @param BufferSize - Size of Buffer. + @param Buffer - Buffer containing the new volume info. + + @retval EFI_SUCCESS - Set the volume info successfully. + @retval EFI_BAD_BUFFER_SIZE - The buffer size is error. + @retval EFI_WRITE_PROTECTED - The volume is read only. + @return other - An error occurred when operation the disk. + +**/ EFI_STATUS FatSetVolumeInfo ( IN FAT_VOLUME *Volume, @@ -30,6 +56,20 @@ FatSetVolumeInfo ( IN VOID *Buffer ); +/** + + Set or Get the some types info of the file into Buffer. + + @param IsSet - TRUE:The access is set, else is get + @param FHand - The handle of file + @param Type - The type of the info + @param BufferSize - Size of Buffer + @param Buffer - Buffer containing volume info + + @retval EFI_SUCCESS - Get the info successfully + @retval EFI_DEVICE_ERROR - Can not find the OFile for the file + +**/ EFI_STATUS FatSetOrGetInfo ( IN BOOLEAN IsSet, -- 2.39.2