From 5d23922674950ec2d2654b4c606692696681b544 Mon Sep 17 00:00:00 2001 From: andrewfish Date: Wed, 2 Feb 2011 22:54:50 +0000 Subject: [PATCH] Remove tabs. git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@11296 6f19259b-4bc3-4df7-8a09-765794883524 --- Omap35xxPkg/MMCHSDxe/MMCHS.c | 359 +++++++++++++++++++++++------------ 1 file changed, 239 insertions(+), 120 deletions(-) diff --git a/Omap35xxPkg/MMCHSDxe/MMCHS.c b/Omap35xxPkg/MMCHSDxe/MMCHS.c index ccfaf5c699..9ddb48a65b 100644 --- a/Omap35xxPkg/MMCHSDxe/MMCHS.c +++ b/Omap35xxPkg/MMCHSDxe/MMCHS.c @@ -745,7 +745,7 @@ DmaBlocks ( UINTN CmdInterruptEnable; UINTN CmdArgument; VOID *BufferMap; - EFI_PHYSICAL_ADDRESS BufferAddress; + EFI_PHYSICAL_ADDRESS BufferAddress; OMAP_DMA4 Dma4; DMA_MAP_OPERATION DmaOperation; EFI_STATUS MmcStatus; @@ -760,16 +760,26 @@ CpuDeadLoop (); } ZeroMem (&DmaOperation, sizeof (DMA_MAP_OPERATION)); - - Dma4.DataType = 2; // DMA4_CSDPi[1:0] 32-bit elements from MMCHS_DATA - Dma4.SourceEndiansim = 0; // DMA4_CSDPi[21] - Dma4.DestinationEndianism = 0; // DMA4_CSDPi[19] - Dma4.SourcePacked = 0; // DMA4_CSDPi[6] - Dma4.DestinationPacked = 0; // DMA4_CSDPi[13] - Dma4.NumberOfElementPerFrame = This->Media->BlockSize/4; // DMA4_CENi (TRM 4K is optimum value) - Dma4.NumberOfFramePerTransferBlock = BlockCount; // DMA4_CFNi - Dma4.ReadPriority = 0; // DMA4_CCRi[6] Low priority read - Dma4.WritePriority = 0; // DMA4_CCRi[23] Prefetech disabled + + + Dma4.DataType = 2; // DMA4_CSDPi[1:0] 32-bit elements from MMCHS_DATA + + Dma4.SourceEndiansim = 0; // DMA4_CSDPi[21] + + Dma4.DestinationEndianism = 0; // DMA4_CSDPi[19] + + Dma4.SourcePacked = 0; // DMA4_CSDPi[6] + + Dma4.DestinationPacked = 0; // DMA4_CSDPi[13] + + Dma4.NumberOfElementPerFrame = This->Media->BlockSize/4; // DMA4_CENi (TRM 4K is optimum value) + + Dma4.NumberOfFramePerTransferBlock = BlockCount; // DMA4_CFNi + + Dma4.ReadPriority = 0; // DMA4_CCRi[6] Low priority read + + Dma4.WritePriority = 0; // DMA4_CCRi[23] Prefetech disabled + //Populate the command information based on the operation type. if (OperationType == READ) { @@ -777,20 +787,34 @@ CpuDeadLoop (); CmdInterruptEnable = CMD18_INT_EN; DmaOperation = MapOperationBusMasterCommonBuffer; - Dma4.ReadPortAccessType =0 ; // DMA4_CSDPi[8:7] Can not burst MMCHS_DATA reg - Dma4.WritePortAccessType = 3; // DMA4_CSDPi[15:14] Memory burst 16x32 - Dma4.WriteMode = 1; // DMA4_CSDPi[17:16] Write posted - - Dma4.SourceStartAddress = MMCHS_DATA; // DMA4_CSSAi - Dma4.DestinationStartAddress = (UINT32)BufferAddress; // DMA4_CDSAi - Dma4.SourceElementIndex = 1; // DMA4_CSEi - Dma4.SourceFrameIndex = 0x200; // DMA4_CSFi - Dma4.DestinationElementIndex = 1; // DMA4_CDEi - Dma4.DestinationFrameIndex = 0; // DMA4_CDFi - - Dma4.ReadPortAccessMode = 0; // DMA4_CCRi[13:12] Always read MMCHS_DATA - Dma4.WritePortAccessMode = 1; // DMA4_CCRi[15:14] Post increment memory address - Dma4.ReadRequestNumber = 0x1e; // DMA4_CCRi[4:0] Syncro with MMCA_DMA_RX (61) + Dma4.ReadPortAccessType =0 ; // DMA4_CSDPi[8:7] Can not burst MMCHS_DATA reg + + Dma4.WritePortAccessType = 3; // DMA4_CSDPi[15:14] Memory burst 16x32 + + Dma4.WriteMode = 1; // DMA4_CSDPi[17:16] Write posted + + + + Dma4.SourceStartAddress = MMCHS_DATA; // DMA4_CSSAi + + Dma4.DestinationStartAddress = (UINT32)BufferAddress; // DMA4_CDSAi + + Dma4.SourceElementIndex = 1; // DMA4_CSEi + + Dma4.SourceFrameIndex = 0x200; // DMA4_CSFi + + Dma4.DestinationElementIndex = 1; // DMA4_CDEi + + Dma4.DestinationFrameIndex = 0; // DMA4_CDFi + + + + Dma4.ReadPortAccessMode = 0; // DMA4_CCRi[13:12] Always read MMCHS_DATA + + Dma4.WritePortAccessMode = 1; // DMA4_CCRi[15:14] Post increment memory address + + Dma4.ReadRequestNumber = 0x1e; // DMA4_CCRi[4:0] Syncro with MMCA_DMA_RX (61) + Dma4.WriteRequestNumber = 1; // DMA4_CCRi[20:19] Syncro upper 0x3e == 62 (one based) } else if (OperationType == WRITE) { @@ -798,20 +822,34 @@ CpuDeadLoop (); CmdInterruptEnable = CMD25_INT_EN; DmaOperation = MapOperationBusMasterRead; - Dma4.ReadPortAccessType = 3; // DMA4_CSDPi[8:7] Memory burst 16x32 - Dma4.WritePortAccessType = 0; // DMA4_CSDPi[15:14] Can not burst MMCHS_DATA reg - Dma4.WriteMode = 1; // DMA4_CSDPi[17:16] Write posted ??? - - Dma4.SourceStartAddress = (UINT32)BufferAddress; // DMA4_CSSAi - Dma4.DestinationStartAddress = MMCHS_DATA; // DMA4_CDSAi - Dma4.SourceElementIndex = 1; // DMA4_CSEi - Dma4.SourceFrameIndex = 0x200; // DMA4_CSFi - Dma4.DestinationElementIndex = 1; // DMA4_CDEi - Dma4.DestinationFrameIndex = 0; // DMA4_CDFi - - Dma4.ReadPortAccessMode = 1; // DMA4_CCRi[13:12] Post increment memory address - Dma4.WritePortAccessMode = 0; // DMA4_CCRi[15:14] Always write MMCHS_DATA - Dma4.ReadRequestNumber = 0x1d; // DMA4_CCRi[4:0] Syncro with MMCA_DMA_TX (60) + Dma4.ReadPortAccessType = 3; // DMA4_CSDPi[8:7] Memory burst 16x32 + + Dma4.WritePortAccessType = 0; // DMA4_CSDPi[15:14] Can not burst MMCHS_DATA reg + + Dma4.WriteMode = 1; // DMA4_CSDPi[17:16] Write posted ??? + + + + Dma4.SourceStartAddress = (UINT32)BufferAddress; // DMA4_CSSAi + + Dma4.DestinationStartAddress = MMCHS_DATA; // DMA4_CDSAi + + Dma4.SourceElementIndex = 1; // DMA4_CSEi + + Dma4.SourceFrameIndex = 0x200; // DMA4_CSFi + + Dma4.DestinationElementIndex = 1; // DMA4_CDEi + + Dma4.DestinationFrameIndex = 0; // DMA4_CDFi + + + + Dma4.ReadPortAccessMode = 1; // DMA4_CCRi[13:12] Post increment memory address + + Dma4.WritePortAccessMode = 0; // DMA4_CCRi[15:14] Always write MMCHS_DATA + + Dma4.ReadRequestNumber = 0x1d; // DMA4_CCRi[4:0] Syncro with MMCA_DMA_TX (60) + Dma4.WriteRequestNumber = 1; // DMA4_CCRi[20:19] Syncro upper 0x3d == 61 (one based) } else { @@ -1087,8 +1125,10 @@ SdReadWrite ( UINTN BlockCount; UINTN BytesToBeTranferedThisPass = 0; UINTN BytesRemainingToBeTransfered; - EFI_TPL OldTpl; - BOOLEAN Update; + EFI_TPL OldTpl; + + BOOLEAN Update; + Update = FALSE; @@ -1111,12 +1151,18 @@ SdReadWrite ( if (Update) { DEBUG ((EFI_D_INFO, "SD Card ReinstallProtocolInterface ()\n")); - gBS->ReinstallProtocolInterface ( - gImageHandle, - &gEfiBlockIoProtocolGuid, - &gBlockIo, - &gBlockIo - ); + gBS->ReinstallProtocolInterface ( + + gImageHandle, + + &gEfiBlockIoProtocolGuid, + + &gBlockIo, + + &gBlockIo + + ); + } if (EFI_ERROR (Status)) { @@ -1179,23 +1225,37 @@ SdReadWrite ( Buffer = (UINT8 *)Buffer + This->Media->BlockSize; } -DoneRestoreTPL: - gBS->RestoreTPL (OldTpl); -Done: - return Status; +DoneRestoreTPL: + + gBS->RestoreTPL (OldTpl); + +Done: + + return Status; + } -/** - Reset the Block Device. - - @param This Indicates a pointer to the calling context. - @param ExtendedVerification Driver may perform diagnostics on reset. - - @retval EFI_SUCCESS The device was reset. - @retval EFI_DEVICE_ERROR The device is not functioning properly and could - not be reset. - +/** + + Reset the Block Device. + + + + @param This Indicates a pointer to the calling context. + + @param ExtendedVerification Driver may perform diagnostics on reset. + + + + @retval EFI_SUCCESS The device was reset. + + @retval EFI_DEVICE_ERROR The device is not functioning properly and could + + not be reset. + + + **/ EFI_STATUS EFIAPI @@ -1208,23 +1268,40 @@ MMCHSReset ( } -/** - Read BufferSize bytes from Lba into Buffer. - - @param This Indicates a pointer to the calling context. - @param MediaId Id of the media, changes every time the media is replaced. - @param Lba The starting Logical Block Address to read from - @param BufferSize Size of Buffer, must be a multiple of device block size. - @param Buffer A pointer to the destination buffer for the data. The caller is - responsible for either having implicit or explicit ownership of the buffer. - - @retval EFI_SUCCESS The data was read correctly from the device. - @retval EFI_DEVICE_ERROR The device reported an error while performing the read. - @retval EFI_NO_MEDIA There is no media in the device. - @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device. - @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. - @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, - or the buffer is not on proper alignment. +/** + + Read BufferSize bytes from Lba into Buffer. + + + + @param This Indicates a pointer to the calling context. + + @param MediaId Id of the media, changes every time the media is replaced. + + @param Lba The starting Logical Block Address to read from + + @param BufferSize Size of Buffer, must be a multiple of device block size. + + @param Buffer A pointer to the destination buffer for the data. The caller is + + responsible for either having implicit or explicit ownership of the buffer. + + + + @retval EFI_SUCCESS The data was read correctly from the device. + + @retval EFI_DEVICE_ERROR The device reported an error while performing the read. + + @retval EFI_NO_MEDIA There is no media in the device. + + @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device. + + @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. + + @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, + + or the buffer is not on proper alignment. + EFI_STATUS **/ @@ -1243,29 +1320,49 @@ MMCHSReadBlocks ( //Perform Read operation. Status = SdReadWrite (This, (UINTN)Lba, Buffer, BufferSize, READ); - return Status; + return Status; + } -/** - Write BufferSize bytes from Lba into Buffer. - - @param This Indicates a pointer to the calling context. - @param MediaId The media ID that the write request is for. - @param Lba The starting logical block address to be written. The caller is - responsible for writing to only legitimate locations. - @param BufferSize Size of Buffer, must be a multiple of device block size. - @param Buffer A pointer to the source buffer for the data. - - @retval EFI_SUCCESS The data was written correctly to the device. - @retval EFI_WRITE_PROTECTED The device can not be written to. - @retval EFI_DEVICE_ERROR The device reported an error while performing the write. - @retval EFI_NO_MEDIA There is no media in the device. - @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device. - @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. - @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, - or the buffer is not on proper alignment. - +/** + + Write BufferSize bytes from Lba into Buffer. + + + + @param This Indicates a pointer to the calling context. + + @param MediaId The media ID that the write request is for. + + @param Lba The starting logical block address to be written. The caller is + + responsible for writing to only legitimate locations. + + @param BufferSize Size of Buffer, must be a multiple of device block size. + + @param Buffer A pointer to the source buffer for the data. + + + + @retval EFI_SUCCESS The data was written correctly to the device. + + @retval EFI_WRITE_PROTECTED The device can not be written to. + + @retval EFI_DEVICE_ERROR The device reported an error while performing the write. + + @retval EFI_NO_MEDIA There is no media in the device. + + @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device. + + @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device. + + @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, + + or the buffer is not on proper alignment. + + + **/ EFI_STATUS EFIAPI @@ -1281,20 +1378,31 @@ MMCHSWriteBlocks ( //Perform write operation. Status = SdReadWrite (This, (UINTN)Lba, Buffer, BufferSize, WRITE); - - return Status; + + + return Status; + } -/** - Flush the Block Device. - - @param This Indicates a pointer to the calling context. - - @retval EFI_SUCCESS All outstanding data was written to the device - @retval EFI_DEVICE_ERROR The device reported an error while writting back the data - @retval EFI_NO_MEDIA There is no media in the device. - +/** + + Flush the Block Device. + + + + @param This Indicates a pointer to the calling context. + + + + @retval EFI_SUCCESS All outstanding data was written to the device + + @retval EFI_DEVICE_ERROR The device reported an error while writting back the data + + @retval EFI_NO_MEDIA There is no media in the device. + + + **/ EFI_STATUS EFIAPI @@ -1316,17 +1424,28 @@ EFI_BLOCK_IO_PROTOCOL gBlockIo = { }; -/** - Timer callback to convert card present hardware into a boolean that indicates - a media change event has happened. If you just check the GPIO you could see - card 1 and then check again after card 1 was removed and card 2 was inserted - and you would still see media present. Thus you need the timer tick to catch - the toggle event. - - @param Event Event whose notification function is being invoked. - @param Context The pointer to the notification function's context, - which is implementation-dependent. Not used. - +/** + + Timer callback to convert card present hardware into a boolean that indicates + + a media change event has happened. If you just check the GPIO you could see + + card 1 and then check again after card 1 was removed and card 2 was inserted + + and you would still see media present. Thus you need the timer tick to catch + + the toggle event. + + + + @param Event Event whose notification function is being invoked. + + @param Context The pointer to the notification function's context, + + which is implementation-dependent. Not used. + + + **/ VOID EFIAPI -- 2.39.2