From 9c581939277b1d535eae1c2df9b22dd207184cca Mon Sep 17 00:00:00 2001 From: Hao Wu Date: Fri, 11 Dec 2015 01:57:41 +0000 Subject: [PATCH] MdePkg UefiScsiLib: Add non-blocking support for SCSI Read/Write command Four new functions are added to UefiScsiLib: ScsiRead10CommandEx ScsiWrite10CommandEx ScsiRead16CommandEx ScsiWrite16CommandEx They support both blocking and non-blocking SCSI Read/Write operation depending on the optional parameter 'Event' passed to those APIs. When 'Event' is NULL, these four functions will call the non-EX version couterparts to execute blocking SCSI I/O. When 'Event' is not NULL, non-blocking I/O operation is executed. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Hao Wu Reviewed-by: Feng Tian git-svn-id: https://svn.code.sf.net/p/edk2/code/trunk/edk2@19214 6f19259b-4bc3-4df7-8a09-765794883524 --- MdePkg/Include/Library/UefiScsiLib.h | 360 ++++++++++ MdePkg/Library/UefiScsiLib/UefiScsiLib.c | 776 +++++++++++++++++++++ MdePkg/Library/UefiScsiLib/UefiScsiLib.inf | 4 +- 3 files changed, 1139 insertions(+), 1 deletion(-) diff --git a/MdePkg/Include/Library/UefiScsiLib.h b/MdePkg/Include/Library/UefiScsiLib.h index 26e4aa4e0f..067acfdb43 100644 --- a/MdePkg/Include/Library/UefiScsiLib.h +++ b/MdePkg/Include/Library/UefiScsiLib.h @@ -818,4 +818,364 @@ ScsiWrite16Command ( IN UINT32 SectorSize ); + +/** + Execute blocking/non-blocking Read(10) SCSI command on a specific SCSI + target. + + Executes the SCSI Read(10) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer Read 16 command data. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Read(10) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiRead10CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT32 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ); + + +/** + Execute blocking/non-blocking Write(10) SCSI command on a specific SCSI + target. + + Executes the SCSI Write(10) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo SCSI IO Protocol to use + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Write(10) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiWrite10CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT32 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ); + + +/** + Execute blocking/non-blocking Read(16) SCSI command on a specific SCSI + target. + + Executes the SCSI Read(16) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer Read 16 command data. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Read(16) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiRead16CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT64 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ); + + +/** + Execute blocking/non-blocking Write(16) SCSI command on a specific SCSI + target. + + Executes the SCSI Write(16) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo SCSI IO Protocol to use + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Write(16) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiWrite16CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT64 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ); + #endif diff --git a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c index 89f261777b..d8babcee40 100644 --- a/MdePkg/Library/UefiScsiLib/UefiScsiLib.c +++ b/MdePkg/Library/UefiScsiLib/UefiScsiLib.c @@ -18,6 +18,8 @@ #include #include #include +#include +#include #include @@ -29,6 +31,39 @@ #define EFI_SCSI_OP_LENGTH_TEN 0xa #define EFI_SCSI_OP_LENGTH_SIXTEEN 0x10 +// +// The context structure used when non-blocking SCSI read/write operation +// completes. +// +typedef struct { + /// + /// The SCSI request packet to send to the SCSI controller specified by + /// the device handle. + /// + EFI_SCSI_IO_SCSI_REQUEST_PACKET CommandPacket; + /// + /// The length of the output sense data. + /// + UINT8 *SenseDataLength; + /// + /// The status of the SCSI host adapter. + /// + UINT8 *HostAdapterStatus; + /// + /// The status of the target SCSI device. + /// + UINT8 *TargetStatus; + /// + /// The length of the data buffer for the SCSI read/write command. + /// + UINT32 *DataLength; + /// + /// The caller event to be signaled when the SCSI read/write command + /// completes. + /// + EFI_EVENT CallerEvent; +} EFI_SCSI_LIB_ASYNC_CONTEXT; + /** @@ -1249,3 +1284,744 @@ ScsiWrite16Command ( return Status; } + + +/** + Internal helper notify function in which update the result of the + non-blocking SCSI Read/Write commands and signal caller event. + + @param Event The instance of EFI_EVENT. + @param Context The parameter passed in. + +**/ +VOID +EFIAPI +ScsiLibNotify ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + EFI_SCSI_LIB_ASYNC_CONTEXT *LibContext; + EFI_SCSI_IO_SCSI_REQUEST_PACKET *CommandPacket; + EFI_EVENT CallerEvent; + + LibContext = (EFI_SCSI_LIB_ASYNC_CONTEXT *) Context; + CommandPacket = &LibContext->CommandPacket; + CallerEvent = LibContext->CallerEvent; + + // + // Update SCSI Read/Write operation results + // + *LibContext->SenseDataLength = CommandPacket->SenseDataLength; + *LibContext->HostAdapterStatus = CommandPacket->HostAdapterStatus; + *LibContext->TargetStatus = CommandPacket->TargetStatus; + if (CommandPacket->InDataBuffer != NULL) { + *LibContext->DataLength = CommandPacket->InTransferLength; + } else { + *LibContext->DataLength = CommandPacket->OutTransferLength; + } + + if (CommandPacket->Cdb != NULL) { + FreePool (CommandPacket->Cdb); + } + FreePool (Context); + + gBS->CloseEvent (Event); + gBS->SignalEvent (CallerEvent); +} + + +/** + Execute blocking/non-blocking Read(10) SCSI command on a specific SCSI + target. + + Executes the SCSI Read(10) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer Read 16 command data. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Read(10) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiRead10CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT32 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ) +{ + EFI_SCSI_LIB_ASYNC_CONTEXT *Context; + EFI_SCSI_IO_SCSI_REQUEST_PACKET *CommandPacket; + EFI_STATUS Status; + UINT8 *Cdb; + EFI_EVENT SelfEvent; + + if (Event == NULL) { + return ScsiRead10Command ( + ScsiIo, + Timeout, + SenseData, + SenseDataLength, + HostAdapterStatus, + TargetStatus, + DataBuffer, + DataLength, + StartLba, + SectorSize + ); + } + + ASSERT (SenseDataLength != NULL); + ASSERT (HostAdapterStatus != NULL); + ASSERT (TargetStatus != NULL); + ASSERT (DataLength != NULL); + ASSERT (ScsiIo != NULL); + + Context = AllocateZeroPool (sizeof (EFI_SCSI_LIB_ASYNC_CONTEXT)); + if (Context == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Cdb = AllocateZeroPool (EFI_SCSI_OP_LENGTH_TEN); + if (Cdb == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto ErrorExit; + } + + Context->SenseDataLength = SenseDataLength; + Context->HostAdapterStatus = HostAdapterStatus; + Context->TargetStatus = TargetStatus; + Context->CallerEvent = Event; + + CommandPacket = &Context->CommandPacket; + CommandPacket->Timeout = Timeout; + CommandPacket->InDataBuffer = DataBuffer; + CommandPacket->SenseData = SenseData; + CommandPacket->InTransferLength = *DataLength; + CommandPacket->Cdb = Cdb; + // + // Fill Cdb for Read (10) Command + // + Cdb[0] = EFI_SCSI_OP_READ10; + WriteUnaligned32 ((UINT32 *)&Cdb[2], SwapBytes32 (StartLba)); + WriteUnaligned16 ((UINT16 *)&Cdb[7], SwapBytes16 ((UINT16) SectorSize)); + + CommandPacket->CdbLength = EFI_SCSI_OP_LENGTH_TEN; + CommandPacket->DataDirection = EFI_SCSI_DATA_IN; + CommandPacket->SenseDataLength = *SenseDataLength; + + // + // Create Event + // + Status = gBS->CreateEvent ( + EVT_NOTIFY_SIGNAL, + TPL_CALLBACK, + ScsiLibNotify, + Context, + &SelfEvent + ); + if (EFI_ERROR(Status)) { + goto ErrorExit; + } + + return ScsiIo->ExecuteScsiCommand (ScsiIo, CommandPacket, SelfEvent); + +ErrorExit: + if (Context != NULL) { + FreePool (Context); + } + + return Status; +} + + +/** + Execute blocking/non-blocking Write(10) SCSI command on a specific SCSI + target. + + Executes the SCSI Write(10) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo SCSI IO Protocol to use + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Write(10) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiWrite10CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT32 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ) +{ + EFI_SCSI_LIB_ASYNC_CONTEXT *Context; + EFI_SCSI_IO_SCSI_REQUEST_PACKET *CommandPacket; + EFI_STATUS Status; + UINT8 *Cdb; + EFI_EVENT SelfEvent; + + if (Event == NULL) { + return ScsiWrite10Command ( + ScsiIo, + Timeout, + SenseData, + SenseDataLength, + HostAdapterStatus, + TargetStatus, + DataBuffer, + DataLength, + StartLba, + SectorSize + ); + } + + ASSERT (SenseDataLength != NULL); + ASSERT (HostAdapterStatus != NULL); + ASSERT (TargetStatus != NULL); + ASSERT (DataLength != NULL); + ASSERT (ScsiIo != NULL); + + Context = AllocateZeroPool (sizeof (EFI_SCSI_LIB_ASYNC_CONTEXT)); + if (Context == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Cdb = AllocateZeroPool (EFI_SCSI_OP_LENGTH_TEN); + if (Cdb == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto ErrorExit; + } + + Context->SenseDataLength = SenseDataLength; + Context->HostAdapterStatus = HostAdapterStatus; + Context->TargetStatus = TargetStatus; + Context->CallerEvent = Event; + + CommandPacket = &Context->CommandPacket; + CommandPacket->Timeout = Timeout; + CommandPacket->OutDataBuffer = DataBuffer; + CommandPacket->SenseData = SenseData; + CommandPacket->OutTransferLength = *DataLength; + CommandPacket->Cdb = Cdb; + // + // Fill Cdb for Write (10) Command + // + Cdb[0] = EFI_SCSI_OP_WRITE10; + WriteUnaligned32 ((UINT32 *)&Cdb[2], SwapBytes32 (StartLba)); + WriteUnaligned16 ((UINT16 *)&Cdb[7], SwapBytes16 ((UINT16) SectorSize)); + + CommandPacket->CdbLength = EFI_SCSI_OP_LENGTH_TEN; + CommandPacket->DataDirection = EFI_SCSI_DATA_OUT; + CommandPacket->SenseDataLength = *SenseDataLength; + + // + // Create Event + // + Status = gBS->CreateEvent ( + EVT_NOTIFY_SIGNAL, + TPL_CALLBACK, + ScsiLibNotify, + Context, + &SelfEvent + ); + if (EFI_ERROR(Status)) { + goto ErrorExit; + } + + return ScsiIo->ExecuteScsiCommand (ScsiIo, CommandPacket, Event); + +ErrorExit: + if (Context != NULL) { + FreePool (Context); + } + + return Status; +} + + +/** + Execute blocking/non-blocking Read(16) SCSI command on a specific SCSI + target. + + Executes the SCSI Read(16) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer Read 16 command data. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Read(16) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiRead16CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT64 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ) +{ + EFI_SCSI_LIB_ASYNC_CONTEXT *Context; + EFI_SCSI_IO_SCSI_REQUEST_PACKET *CommandPacket; + EFI_STATUS Status; + UINT8 *Cdb; + EFI_EVENT SelfEvent; + + if (Event == NULL) { + return ScsiRead16Command ( + ScsiIo, + Timeout, + SenseData, + SenseDataLength, + HostAdapterStatus, + TargetStatus, + DataBuffer, + DataLength, + StartLba, + SectorSize + ); + } + + ASSERT (SenseDataLength != NULL); + ASSERT (HostAdapterStatus != NULL); + ASSERT (TargetStatus != NULL); + ASSERT (DataLength != NULL); + ASSERT (ScsiIo != NULL); + + Context = AllocateZeroPool (sizeof (EFI_SCSI_LIB_ASYNC_CONTEXT)); + if (Context == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Cdb = AllocateZeroPool (EFI_SCSI_OP_LENGTH_SIXTEEN); + if (Cdb == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto ErrorExit; + } + + Context->SenseDataLength = SenseDataLength; + Context->HostAdapterStatus = HostAdapterStatus; + Context->TargetStatus = TargetStatus; + Context->CallerEvent = Event; + + CommandPacket = &Context->CommandPacket; + CommandPacket->Timeout = Timeout; + CommandPacket->InDataBuffer = DataBuffer; + CommandPacket->SenseData = SenseData; + CommandPacket->InTransferLength = *DataLength; + CommandPacket->Cdb = Cdb; + // + // Fill Cdb for Read (16) Command + // + Cdb[0] = EFI_SCSI_OP_READ16; + WriteUnaligned64 ((UINT64 *)&Cdb[2], SwapBytes64 (StartLba)); + WriteUnaligned32 ((UINT32 *)&Cdb[10], SwapBytes32 (SectorSize)); + + CommandPacket->CdbLength = EFI_SCSI_OP_LENGTH_SIXTEEN; + CommandPacket->DataDirection = EFI_SCSI_DATA_IN; + CommandPacket->SenseDataLength = *SenseDataLength; + + // + // Create Event + // + Status = gBS->CreateEvent ( + EVT_NOTIFY_SIGNAL, + TPL_CALLBACK, + ScsiLibNotify, + Context, + &SelfEvent + ); + if (EFI_ERROR(Status)) { + goto ErrorExit; + } + + return ScsiIo->ExecuteScsiCommand (ScsiIo, CommandPacket, Event); + +ErrorExit: + if (Context != NULL) { + FreePool (Context); + } + + return Status; +} + + +/** + Execute blocking/non-blocking Write(16) SCSI command on a specific SCSI + target. + + Executes the SCSI Write(16) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo SCSI IO Protocol to use + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Write(16) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiWrite16CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT64 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ) +{ + EFI_SCSI_LIB_ASYNC_CONTEXT *Context; + EFI_SCSI_IO_SCSI_REQUEST_PACKET *CommandPacket; + EFI_STATUS Status; + UINT8 *Cdb; + EFI_EVENT SelfEvent; + + if (Event == NULL) { + return ScsiWrite16Command ( + ScsiIo, + Timeout, + SenseData, + SenseDataLength, + HostAdapterStatus, + TargetStatus, + DataBuffer, + DataLength, + StartLba, + SectorSize + ); + } + + ASSERT (SenseDataLength != NULL); + ASSERT (HostAdapterStatus != NULL); + ASSERT (TargetStatus != NULL); + ASSERT (DataLength != NULL); + ASSERT (ScsiIo != NULL); + + Context = AllocateZeroPool (sizeof (EFI_SCSI_LIB_ASYNC_CONTEXT)); + if (Context == NULL) { + return EFI_OUT_OF_RESOURCES; + } + + Cdb = AllocateZeroPool (EFI_SCSI_OP_LENGTH_SIXTEEN); + if (Cdb == NULL) { + Status = EFI_OUT_OF_RESOURCES; + goto ErrorExit; + } + + Context->SenseDataLength = SenseDataLength; + Context->HostAdapterStatus = HostAdapterStatus; + Context->TargetStatus = TargetStatus; + Context->CallerEvent = Event; + + CommandPacket = &Context->CommandPacket; + CommandPacket->Timeout = Timeout; + CommandPacket->OutDataBuffer = DataBuffer; + CommandPacket->SenseData = SenseData; + CommandPacket->OutTransferLength = *DataLength; + CommandPacket->Cdb = Cdb; + // + // Fill Cdb for Write (16) Command + // + Cdb[0] = EFI_SCSI_OP_WRITE16; + WriteUnaligned64 ((UINT64 *)&Cdb[2], SwapBytes64 (StartLba)); + WriteUnaligned32 ((UINT32 *)&Cdb[10], SwapBytes32 (SectorSize)); + + CommandPacket->CdbLength = EFI_SCSI_OP_LENGTH_SIXTEEN; + CommandPacket->DataDirection = EFI_SCSI_DATA_OUT; + CommandPacket->SenseDataLength = *SenseDataLength; + + // + // Create Event + // + Status = gBS->CreateEvent ( + EVT_NOTIFY_SIGNAL, + TPL_CALLBACK, + ScsiLibNotify, + Context, + &SelfEvent + ); + if (EFI_ERROR(Status)) { + goto ErrorExit; + } + + return ScsiIo->ExecuteScsiCommand (ScsiIo, CommandPacket, Event); + +ErrorExit: + if (Context != NULL) { + FreePool (Context); + } + + return Status; +} diff --git a/MdePkg/Library/UefiScsiLib/UefiScsiLib.inf b/MdePkg/Library/UefiScsiLib/UefiScsiLib.inf index 1eb90765af..cd0c5c1ec8 100644 --- a/MdePkg/Library/UefiScsiLib/UefiScsiLib.inf +++ b/MdePkg/Library/UefiScsiLib/UefiScsiLib.inf @@ -4,7 +4,7 @@ # This libarary provides the functions to submit Scsi commands defined # in SCSI-2 specification for scsi device. # -# Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.
+# Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.
# # This program and the accompanying materials # are licensed and made available under the terms and conditions of the BSD License @@ -42,4 +42,6 @@ BaseMemoryLib DebugLib BaseLib + MemoryAllocationLib + UefiBootServicesTableLib -- 2.39.2