From b1ca386074bd74ddfea24adea2f8704506bea3c9 Mon Sep 17 00:00:00 2001 From: Ruiyu Ni Date: Thu, 7 Jul 2016 13:31:27 +0800 Subject: [PATCH 1/1] MdeModulePkg: Add FrameBufferBltLib library instance This library provides interfaces to perform UEFI Graphics Output Protocol Video BLT operations. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ruiyu Ni Reviewed-by: Feng Tian Cc: Justen Jordan Tested-by: Laszlo Ersek --- .../FrameBufferBltLib/FrameBufferBltLib.c | 704 ++++++++++++++++++ .../FrameBufferBltLib/FrameBufferBltLib.inf | 34 + MdeModulePkg/MdeModulePkg.dsc | 1 + 3 files changed, 739 insertions(+) create mode 100644 MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.c create mode 100644 MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf diff --git a/MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.c b/MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.c new file mode 100644 index 0000000000..c9bb206ee8 --- /dev/null +++ b/MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.c @@ -0,0 +1,704 @@ +/** @file + FrameBufferBltLib - Library to perform blt operations on a frame buffer. + + Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.
+ This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#include +#include + +#include +#include +#include +#include + +struct FRAME_BUFFER_CONFIGURE { + UINTN ColorDepth; + UINTN WidthInBytes; + UINTN BytesPerPixel; + UINTN WidthInPixels; + UINTN Height; + UINT8 LineBuffer[SIZE_4KB * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)]; + UINT8 *FrameBuffer; + EFI_GRAPHICS_PIXEL_FORMAT PixelFormat; + EFI_PIXEL_BITMASK PixelMasks; + INTN PixelShl[4]; // R-G-B-Rsvd + INTN PixelShr[4]; // R-G-B-Rsvd +}; + +CONST EFI_PIXEL_BITMASK mRgbPixelMasks = { + 0x000000ff, 0x0000ff00, 0x00ff0000, 0xff000000 +}; + +CONST EFI_PIXEL_BITMASK mBgrPixelMasks = { + 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 +}; + +/** + Initialize the bit mask in frame buffer configure. + + @param Configure The frame buffer configure. + @param BitMask The bit mask of pixel. +**/ +VOID +ConfigurePixelBitMaskFormat ( + IN FRAME_BUFFER_CONFIGURE *Configure, + IN CONST EFI_PIXEL_BITMASK *BitMask + ) +{ + UINTN Loop; + UINT32 *Masks; + UINT32 MergedMasks; + + MergedMasks = 0; + Masks = (UINT32*) BitMask; + for (Loop = 0; Loop < 3; Loop++) { + ASSERT ((Loop == 3) || (Masks[Loop] != 0)); + ASSERT ((MergedMasks & Masks[Loop]) == 0); + Configure->PixelShl[Loop] = HighBitSet32 (Masks[Loop]) - 23 + (Loop * 8); + if (Configure->PixelShl[Loop] < 0) { + Configure->PixelShr[Loop] = -Configure->PixelShl[Loop]; + Configure->PixelShl[Loop] = 0; + } else { + Configure->PixelShr[Loop] = 0; + } + MergedMasks = (UINT32) (MergedMasks | Masks[Loop]); + DEBUG ((EFI_D_VERBOSE, "%d: shl:%d shr:%d mask:%x\n", Loop, + Configure->PixelShl[Loop], Configure->PixelShr[Loop], Masks[Loop])); + } + MergedMasks = (UINT32) (MergedMasks | Masks[3]); + + ASSERT (MergedMasks != 0); + Configure->BytesPerPixel = (UINTN) ((HighBitSet32 (MergedMasks) + 7) / 8); + + DEBUG ((EFI_D_VERBOSE, "Bytes per pixel: %d\n", Configure->BytesPerPixel)); + + CopyMem (&Configure->PixelMasks, BitMask, sizeof (*BitMask)); +} + +/** + Create the configuration for a video frame buffer. + + The configuration is returned in the caller provided buffer. + + @param[in] FrameBuffer Pointer to the start of the frame buffer. + @param[in] FrameBufferInfo Describes the frame buffer characteristics. + @param[in,out] Configure The created configuration information. + @param[in,out] ConfigureSize Size of the configuration information. + + @retval RETURN_SUCCESS The configuration was successful created. + @retval RETURN_BUFFER_TOO_SMALL The Configure is to too small. The required + size is returned in ConfigureSize. + @retval RETURN_UNSUPPORTED The requested mode is not supported by + this implementaion. + +**/ +RETURN_STATUS +EFIAPI +FrameBufferBltConfigure ( + IN VOID *FrameBuffer, + IN EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *FrameBufferInfo, + IN OUT FRAME_BUFFER_CONFIGURE *Configure, + IN OUT UINTN *ConfigureSize + ) +{ + if (ConfigureSize == NULL) { + return RETURN_INVALID_PARAMETER; + } + + if (*ConfigureSize < sizeof (FRAME_BUFFER_CONFIGURE)) { + *ConfigureSize = sizeof (FRAME_BUFFER_CONFIGURE); + return RETURN_BUFFER_TOO_SMALL; + } + + if (Configure == NULL) { + return RETURN_INVALID_PARAMETER; + } + + switch (FrameBufferInfo->PixelFormat) { + case PixelRedGreenBlueReserved8BitPerColor: + ConfigurePixelBitMaskFormat (Configure, &mRgbPixelMasks); + break; + + case PixelBlueGreenRedReserved8BitPerColor: + ConfigurePixelBitMaskFormat (Configure, &mBgrPixelMasks); + break; + + case PixelBitMask: + ConfigurePixelBitMaskFormat (Configure, &(FrameBufferInfo->PixelInformation)); + break; + + case PixelBltOnly: + ASSERT (FrameBufferInfo->PixelFormat != PixelBltOnly); + return RETURN_UNSUPPORTED; + + default: + ASSERT (FALSE); + return RETURN_INVALID_PARAMETER; + } + + Configure->PixelFormat = FrameBufferInfo->PixelFormat; + Configure->FrameBuffer = (UINT8*) FrameBuffer; + Configure->WidthInPixels = (UINTN) FrameBufferInfo->HorizontalResolution; + Configure->Height = (UINTN) FrameBufferInfo->VerticalResolution; + Configure->WidthInBytes = Configure->WidthInPixels * Configure->BytesPerPixel; + + ASSERT (Configure->WidthInBytes < sizeof (Configure->LineBuffer)); + + return RETURN_SUCCESS; +} + +/** + Performs a UEFI Graphics Output Protocol Blt Video Fill. + + @param[in] Configure Pointer to a configuration which was successfully + created by FrameBufferBltConfigure (). + @param[in] Color Color to fill the region with. + @param[in] DestinationX X location to start fill operation. + @param[in] DestinationY Y location to start fill operation. + @param[in] Width Width (in pixels) to fill. + @param[in] Height Height to fill. + + @retval RETURN_INVALID_PARAMETER Invalid parameter was passed in. + @retval RETURN_SUCCESS The video was filled successfully. + +**/ +EFI_STATUS +FrameBufferBltLibVideoFill ( + IN FRAME_BUFFER_CONFIGURE *Configure, + IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Color, + IN UINTN DestinationX, + IN UINTN DestinationY, + IN UINTN Width, + IN UINTN Height + ) +{ + UINTN IndexX; + UINTN IndexY; + UINT8 *Destination; + UINT8 Uint8; + UINT32 Uint32; + UINT64 WideFill; + BOOLEAN UseWideFill; + BOOLEAN LineBufferReady; + UINTN Offset; + UINTN WidthInBytes; + UINTN SizeInBytes; + + // + // BltBuffer to Video: Source is BltBuffer, destination is Video + // + if (DestinationY + Height > Configure->Height) { + DEBUG ((EFI_D_VERBOSE, "VideoFill: Past screen (Y)\n")); + return RETURN_INVALID_PARAMETER; + } + + if (DestinationX + Width > Configure->WidthInPixels) { + DEBUG ((EFI_D_VERBOSE, "VideoFill: Past screen (X)\n")); + return RETURN_INVALID_PARAMETER; + } + + if (Width == 0 || Height == 0) { + DEBUG ((EFI_D_VERBOSE, "VideoFill: Width or Height is 0\n")); + return RETURN_INVALID_PARAMETER; + } + + WidthInBytes = Width * Configure->BytesPerPixel; + + Uint32 = *(UINT32*) Color; + WideFill = + (UINT32) ( + (((Uint32 << Configure->PixelShl[0]) >> Configure->PixelShr[0]) & + Configure->PixelMasks.RedMask) | + (((Uint32 << Configure->PixelShl[1]) >> Configure->PixelShr[1]) & + Configure->PixelMasks.GreenMask) | + (((Uint32 << Configure->PixelShl[2]) >> Configure->PixelShr[2]) & + Configure->PixelMasks.BlueMask) + ); + DEBUG ((EFI_D_VERBOSE, "VideoFill: color=0x%x, wide-fill=0x%x\n", + Uint32, WideFill)); + + // + // If the size of the pixel data evenly divides the sizeof + // WideFill, then a wide fill operation can be used + // + UseWideFill = TRUE; + if ((sizeof (WideFill) % Configure->BytesPerPixel) == 0) { + for (IndexX = Configure->BytesPerPixel; IndexX < sizeof (WideFill); IndexX++) { + ((UINT8*) &WideFill)[IndexX] = ((UINT8*) &WideFill)[IndexX % Configure->BytesPerPixel]; + } + } else { + // + // If all the bytes in the pixel are the same value, then use + // a wide fill operation. + // + for ( + IndexX = 1, Uint8 = ((UINT8*) &WideFill)[0]; + IndexX < Configure->BytesPerPixel; + IndexX++) { + if (Uint8 != ((UINT8*) &WideFill)[IndexX]) { + UseWideFill = FALSE; + break; + } + } + if (UseWideFill) { + SetMem (&WideFill, sizeof (WideFill), Uint8); + } + } + + if (UseWideFill && (DestinationX == 0) && (Width == Configure->WidthInPixels)) { + DEBUG ((EFI_D_VERBOSE, "VideoFill (wide, one-shot)\n")); + Offset = DestinationY * Configure->WidthInPixels; + Offset = Configure->BytesPerPixel * Offset; + Destination = Configure->FrameBuffer + Offset; + SizeInBytes = WidthInBytes * Height; + if (SizeInBytes >= 8) { + SetMem32 (Destination, SizeInBytes & ~3, (UINT32) WideFill); + SizeInBytes &= 3; + } + if (SizeInBytes > 0) { + SetMem (Destination, SizeInBytes, (UINT8) (UINTN) WideFill); + } + } else { + LineBufferReady = FALSE; + for (IndexY = DestinationY; IndexY < (Height + DestinationY); IndexY++) { + Offset = (IndexY * Configure->WidthInPixels) + DestinationX; + Offset = Configure->BytesPerPixel * Offset; + Destination = Configure->FrameBuffer + Offset; + + if (UseWideFill && (((UINTN) Destination & 7) == 0)) { + DEBUG ((EFI_D_VERBOSE, "VideoFill (wide)\n")); + SizeInBytes = WidthInBytes; + if (SizeInBytes >= 8) { + SetMem64 (Destination, SizeInBytes & ~7, WideFill); + SizeInBytes &= 7; + } + if (SizeInBytes > 0) { + CopyMem (Destination, &WideFill, SizeInBytes); + } + } else { + DEBUG ((EFI_D_VERBOSE, "VideoFill (not wide)\n")); + if (!LineBufferReady) { + CopyMem (Configure->LineBuffer, &WideFill, Configure->BytesPerPixel); + for (IndexX = 1; IndexX < Width; ) { + CopyMem ( + (Configure->LineBuffer + (IndexX * Configure->BytesPerPixel)), + Configure->LineBuffer, + MIN (IndexX, Width - IndexX) * Configure->BytesPerPixel + ); + IndexX += MIN (IndexX, Width - IndexX); + } + LineBufferReady = TRUE; + } + CopyMem (Destination, Configure->LineBuffer, WidthInBytes); + } + } + } + + return RETURN_SUCCESS; +} + +/** + Performs a UEFI Graphics Output Protocol Blt Video to Buffer operation + with extended parameters. + + @param[in] Configure Pointer to a configuration which was successfully + created by FrameBufferBltConfigure (). + @param[out] BltBuffer Output buffer for pixel color data. + @param[in] SourceX X location within video. + @param[in] SourceY Y location within video. + @param[in] DestinationX X location within BltBuffer. + @param[in] DestinationY Y location within BltBuffer. + @param[in] Width Width (in pixels). + @param[in] Height Height. + @param[in] Delta Number of bytes in a row of BltBuffer. + + @retval RETURN_INVALID_PARAMETER Invalid parameter were passed in. + @retval RETURN_SUCCESS The Blt operation was performed successfully. +**/ +RETURN_STATUS +FrameBufferBltLibVideoToBltBuffer ( + IN FRAME_BUFFER_CONFIGURE *Configure, + OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, + IN UINTN SourceX, + IN UINTN SourceY, + IN UINTN DestinationX, + IN UINTN DestinationY, + IN UINTN Width, + IN UINTN Height, + IN UINTN Delta + ) +{ + UINTN DstY; + UINTN SrcY; + EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt; + UINT8 *Source; + UINT8 *Destination; + UINTN IndexX; + UINT32 Uint32; + UINTN Offset; + UINTN WidthInBytes; + + // + // Video to BltBuffer: Source is Video, destination is BltBuffer + // + if (SourceY + Height > Configure->Height) { + return RETURN_INVALID_PARAMETER; + } + + if (SourceX + Width > Configure->WidthInPixels) { + return RETURN_INVALID_PARAMETER; + } + + if (Width == 0 || Height == 0) { + return RETURN_INVALID_PARAMETER; + } + + // + // If Delta is zero, then the entire BltBuffer is being used, so Delta is + // the number of bytes in each row of BltBuffer. Since BltBuffer is Width + // pixels size, the number of bytes in each row can be computed. + // + if (Delta == 0) { + Delta = Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL); + } + + WidthInBytes = Width * Configure->BytesPerPixel; + + // + // Video to BltBuffer: Source is Video, destination is BltBuffer + // + for (SrcY = SourceY, DstY = DestinationY; + DstY < (Height + DestinationY); + SrcY++, DstY++) { + + Offset = (SrcY * Configure->WidthInPixels) + SourceX; + Offset = Configure->BytesPerPixel * Offset; + Source = Configure->FrameBuffer + Offset; + + if (Configure->PixelFormat == PixelBlueGreenRedReserved8BitPerColor) { + Destination = (UINT8 *) BltBuffer + (DstY * Delta) + (DestinationX * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)); + } else { + Destination = Configure->LineBuffer; + } + + CopyMem (Destination, Source, WidthInBytes); + + if (Configure->PixelFormat != PixelBlueGreenRedReserved8BitPerColor) { + for (IndexX = 0; IndexX < Width; IndexX++) { + Blt = (EFI_GRAPHICS_OUTPUT_BLT_PIXEL *) + ((UINT8 *) BltBuffer + (DstY * Delta) + + (DestinationX + IndexX) * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)); + Uint32 = *(UINT32*) (Configure->LineBuffer + (IndexX * Configure->BytesPerPixel)); + *(UINT32*) Blt = + (UINT32) ( + (((Uint32 & Configure->PixelMasks.RedMask) >> + Configure->PixelShl[0]) << Configure->PixelShr[0]) | + (((Uint32 & Configure->PixelMasks.GreenMask) >> + Configure->PixelShl[1]) << Configure->PixelShr[1]) | + (((Uint32 & Configure->PixelMasks.BlueMask) >> + Configure->PixelShl[2]) << Configure->PixelShr[2]) + ); + } + } + } + + return RETURN_SUCCESS; +} + +/** + Performs a UEFI Graphics Output Protocol Blt Buffer to Video operation + with extended parameters. + + @param[in] Configure Pointer to a configuration which was successfully + created by FrameBufferBltConfigure (). + @param[in] BltBuffer Output buffer for pixel color data. + @param[in] SourceX X location within BltBuffer. + @param[in] SourceY Y location within BltBuffer. + @param[in] DestinationX X location within video. + @param[in] DestinationY Y location within video. + @param[in] Width Width (in pixels). + @param[in] Height Height. + @param[in] Delta Number of bytes in a row of BltBuffer. + + @retval RETURN_INVALID_PARAMETER Invalid parameter were passed in. + @retval RETURN_SUCCESS The Blt operation was performed successfully. +**/ +RETURN_STATUS +FrameBufferBltLibBufferToVideo ( + IN FRAME_BUFFER_CONFIGURE *Configure, + IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, + IN UINTN SourceX, + IN UINTN SourceY, + IN UINTN DestinationX, + IN UINTN DestinationY, + IN UINTN Width, + IN UINTN Height, + IN UINTN Delta + ) +{ + UINTN DstY; + UINTN SrcY; + EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt; + UINT8 *Source; + UINT8 *Destination; + UINTN IndexX; + UINT32 Uint32; + UINTN Offset; + UINTN WidthInBytes; + + // + // BltBuffer to Video: Source is BltBuffer, destination is Video + // + if (DestinationY + Height > Configure->Height) { + return RETURN_INVALID_PARAMETER; + } + + if (DestinationX + Width > Configure->WidthInPixels) { + return RETURN_INVALID_PARAMETER; + } + + if (Width == 0 || Height == 0) { + return RETURN_INVALID_PARAMETER; + } + + // + // If Delta is zero, then the entire BltBuffer is being used, so Delta is + // the number of bytes in each row of BltBuffer. Since BltBuffer is Width + // pixels size, the number of bytes in each row can be computed. + // + if (Delta == 0) { + Delta = Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL); + } + + WidthInBytes = Width * Configure->BytesPerPixel; + + for (SrcY = SourceY, DstY = DestinationY; + SrcY < (Height + SourceY); + SrcY++, DstY++) { + + Offset = (DstY * Configure->WidthInPixels) + DestinationX; + Offset = Configure->BytesPerPixel * Offset; + Destination = Configure->FrameBuffer + Offset; + + if (Configure->PixelFormat == PixelBlueGreenRedReserved8BitPerColor) { + Source = (UINT8 *) BltBuffer + (SrcY * Delta); + } else { + for (IndexX = 0; IndexX < Width; IndexX++) { + Blt = + (EFI_GRAPHICS_OUTPUT_BLT_PIXEL *) ( + (UINT8 *) BltBuffer + + (SrcY * Delta) + + ((SourceX + IndexX) * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)) + ); + Uint32 = *(UINT32*) Blt; + *(UINT32*) (Configure->LineBuffer + (IndexX * Configure->BytesPerPixel)) = + (UINT32) ( + (((Uint32 << Configure->PixelShl[0]) >> Configure->PixelShr[0]) & + Configure->PixelMasks.RedMask) | + (((Uint32 << Configure->PixelShl[1]) >> Configure->PixelShr[1]) & + Configure->PixelMasks.GreenMask) | + (((Uint32 << Configure->PixelShl[2]) >> Configure->PixelShr[2]) & + Configure->PixelMasks.BlueMask) + ); + } + Source = Configure->LineBuffer; + } + + CopyMem (Destination, Source, WidthInBytes); + } + + return RETURN_SUCCESS; +} + +/** + Performs a UEFI Graphics Output Protocol Blt Video to Video operation + + @param[in] Configure Pointer to a configuration which was successfully + created by FrameBufferBltConfigure (). + @param[in] SourceX X location within video. + @param[in] SourceY Y location within video. + @param[in] DestinationX X location within video. + @param[in] DestinationY Y location within video. + @param[in] Width Width (in pixels). + @param[in] Height Height. + + @retval RETURN_INVALID_PARAMETER Invalid parameter were passed in. + @retval RETURN_SUCCESS The Blt operation was performed successfully. +**/ +RETURN_STATUS +FrameBufferBltLibVideoToVideo ( + IN FRAME_BUFFER_CONFIGURE *Configure, + IN UINTN SourceX, + IN UINTN SourceY, + IN UINTN DestinationX, + IN UINTN DestinationY, + IN UINTN Width, + IN UINTN Height + ) +{ + UINT8 *Source; + UINT8 *Destination; + UINTN Offset; + UINTN WidthInBytes; + INTN LineStride; + + // + // Video to Video: Source is Video, destination is Video + // + if (SourceY + Height > Configure->Height) { + return RETURN_INVALID_PARAMETER; + } + + if (SourceX + Width > Configure->WidthInPixels) { + return RETURN_INVALID_PARAMETER; + } + + if (DestinationY + Height > Configure->Height) { + return RETURN_INVALID_PARAMETER; + } + + if (DestinationX + Width > Configure->WidthInPixels) { + return RETURN_INVALID_PARAMETER; + } + + if (Width == 0 || Height == 0) { + return RETURN_INVALID_PARAMETER; + } + + WidthInBytes = Width * Configure->BytesPerPixel; + + Offset = (SourceY * Configure->WidthInPixels) + SourceX; + Offset = Configure->BytesPerPixel * Offset; + Source = Configure->FrameBuffer + Offset; + + Offset = (DestinationY * Configure->WidthInPixels) + DestinationX; + Offset = Configure->BytesPerPixel * Offset; + Destination = Configure->FrameBuffer + Offset; + + LineStride = Configure->WidthInBytes; + if (Destination > Source) { + // + // Copy from last line to avoid source is corrupted by copying + // + Source += Height * LineStride; + Destination += Height * LineStride; + LineStride = -LineStride; + } + + while (Height-- > 0) { + CopyMem (Destination, Source, WidthInBytes); + + Source += LineStride; + Destination += LineStride; + } + + return RETURN_SUCCESS; +} + +/** + Performs a UEFI Graphics Output Protocol Blt operation. + + @param[in] Configure Pointer to a configuration which was successfully + created by FrameBufferBltConfigure (). + @param[in,out] BltBuffer The data to transfer to screen. + @param[in] BltOperation The operation to perform. + @param[in] SourceX The X coordinate of the source for BltOperation. + @param[in] SourceY The Y coordinate of the source for BltOperation. + @param[in] DestinationX The X coordinate of the destination for + BltOperation. + @param[in] DestinationY The Y coordinate of the destination for + BltOperation. + @param[in] Width The width of a rectangle in the blt rectangle + in pixels. + @param[in] Height The height of a rectangle in the blt rectangle + in pixels. + @param[in] Delta Not used for EfiBltVideoFill and + EfiBltVideoToVideo operation. If a Delta of 0 + is used, the entire BltBuffer will be operated + on. If a subrectangle of the BltBuffer is + used, then Delta represents the number of + bytes in a row of the BltBuffer. + + @retval RETURN_INVALID_PARAMETER Invalid parameter were passed in. + @retval RETURN_SUCCESS The Blt operation was performed successfully. +**/ +RETURN_STATUS +EFIAPI +FrameBufferBlt ( + IN FRAME_BUFFER_CONFIGURE *Configure, + IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer, OPTIONAL + IN EFI_GRAPHICS_OUTPUT_BLT_OPERATION BltOperation, + IN UINTN SourceX, + IN UINTN SourceY, + IN UINTN DestinationX, + IN UINTN DestinationY, + IN UINTN Width, + IN UINTN Height, + IN UINTN Delta + ) +{ + if (Configure == NULL) { + return RETURN_INVALID_PARAMETER; + } + + switch (BltOperation) { + case EfiBltVideoToBltBuffer: + return FrameBufferBltLibVideoToBltBuffer ( + Configure, + BltBuffer, + SourceX, + SourceY, + DestinationX, + DestinationY, + Width, + Height, + Delta + ); + + case EfiBltVideoToVideo: + return FrameBufferBltLibVideoToVideo ( + Configure, + SourceX, + SourceY, + DestinationX, + DestinationY, + Width, + Height + ); + + case EfiBltVideoFill: + return FrameBufferBltLibVideoFill ( + Configure, + BltBuffer, + DestinationX, + DestinationY, + Width, + Height + ); + + case EfiBltBufferToVideo: + return FrameBufferBltLibBufferToVideo ( + Configure, + BltBuffer, + SourceX, + SourceY, + DestinationX, + DestinationY, + Width, + Height, + Delta + ); + + default: + return RETURN_INVALID_PARAMETER; + } +} diff --git a/MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf b/MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf new file mode 100644 index 0000000000..57e4adb039 --- /dev/null +++ b/MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf @@ -0,0 +1,34 @@ +## @file +# FrameBufferBltLib - Library to perform blt operations on a frame buffer. +# +# Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +## + +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = FrameBufferBltLib + FILE_GUID = 243D3E8C-2780-4A25-9693-A410475BFCEC + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = FrameBufferBltLib + +[Sources.common] + FrameBufferBltLib.c + +[LibraryClasses] + BaseLib + BaseMemoryLib + DebugLib + +[Packages] + MdePkg/MdePkg.dec + MdeModulePkg/MdeModulePkg.dec diff --git a/MdeModulePkg/MdeModulePkg.dsc b/MdeModulePkg/MdeModulePkg.dsc index 214cb6ceee..6efd2c2f37 100644 --- a/MdeModulePkg/MdeModulePkg.dsc +++ b/MdeModulePkg/MdeModulePkg.dsc @@ -306,6 +306,7 @@ MdeModulePkg/Library/DxeIpmiLibIpmiProtocol/DxeIpmiLibIpmiProtocol.inf MdeModulePkg/Library/PeiIpmiLibIpmiPpi/PeiIpmiLibIpmiPpi.inf MdeModulePkg/Library/SmmIpmiLibSmmIpmiProtocol/SmmIpmiLibSmmIpmiProtocol.inf + MdeModulePkg/Library/FrameBufferBltLib/FrameBufferBltLib.inf MdeModulePkg/Universal/BdsDxe/BdsDxe.inf MdeModulePkg/Application/BootManagerMenuApp/BootManagerMenuApp.inf -- 2.39.2