From c6ca1c011b154d968be4462ed4a84b815dfea2c6 Mon Sep 17 00:00:00 2001 From: Maurice Ma Date: Fri, 27 May 2016 13:26:28 -0700 Subject: [PATCH] IntelFsp2Pkg/Tools: Add FSP rebasing function into SplitFspBin tool Enhanced the SplitFspBin tool in IntelFsp2Pkg to support: - Rebase FSP 2.0 components to a different base address - Display FSP 2.0 information header Cc: Jiewen Yao Cc: Giri P Mudusuru Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Maurice Ma Reviewed-by: Giri P Mudusuru --- IntelFsp2Pkg/Tools/SplitFspBin.py | 824 +++++++++++++++++++++--------- 1 file changed, 570 insertions(+), 254 deletions(-) diff --git a/IntelFsp2Pkg/Tools/SplitFspBin.py b/IntelFsp2Pkg/Tools/SplitFspBin.py index cc2b87ecc1..ef759f0dc4 100644 --- a/IntelFsp2Pkg/Tools/SplitFspBin.py +++ b/IntelFsp2Pkg/Tools/SplitFspBin.py @@ -20,18 +20,26 @@ import argparse from ctypes import * """ -This utility supports some operations for Intel FSP image. +This utility supports some operations for Intel FSP 2.0 image. It supports: - - Split a FSP 2.0 compatibale image into individual FSP-T/M/S/C - and generate the mapping header file. + - Display FSP 2.0 information header + - Split FSP 2.0 image into individual FSP-T/M/S/O component + - Rebase FSP 2.0 components to a different base address + - Generate FSP mapping C header file +""" + +CopyRightHeaderFile = """/* + * + * Automatically generated file; DO NOT EDIT. + * FSP mapping file + * + */ """ class c_uint24(Structure): """Little-Endian 24-bit Unsigned Integer""" _pack_ = 1 - _fields_ = [ - ('Data', (c_uint8 * 3)) - ] + _fields_ = [('Data', (c_uint8 * 3))] def __init__(self, val=0): self.set_value(val) @@ -39,324 +47,632 @@ class c_uint24(Structure): def __str__(self, indent=0): return '0x%.6x' % self.value - def get_value(self): - return ( - (self.Data[0] ) + - (self.Data[1] << 8) + - (self.Data[2] << 16) - ) + def __int__(self): + return self.get_value() def set_value(self, val): - self.Data[0] = (val ) & 0xff - self.Data[1] = (val >> 8) & 0xff - self.Data[2] = (val >> 16) & 0xff + self.Data[0:3] = Val2Bytes(val, 3) + + def get_value(self): + return Bytes2Val(self.Data[0:3]) value = property(get_value, set_value) class EFI_FIRMWARE_VOLUME_HEADER(Structure): _fields_ = [ - ('ZeroVector', ARRAY(c_uint8, 16)), - ('FileSystemGuid', ARRAY(c_char, 16)), - ('FvLength', c_uint64), - ('Signature', c_uint32), - ('Attributes', c_uint32), - ('HeaderLength', c_uint16), - ('Checksum', c_uint16), - ('ExtHeaderOffset', c_uint16), - ('Reserved', c_uint8), - ('Revision', c_uint8) + ('ZeroVector', ARRAY(c_uint8, 16)), + ('FileSystemGuid', ARRAY(c_uint8, 16)), + ('FvLength', c_uint64), + ('Signature', ARRAY(c_char, 4)), + ('Attributes', c_uint32), + ('HeaderLength', c_uint16), + ('Checksum', c_uint16), + ('ExtHeaderOffset', c_uint16), + ('Reserved', c_uint8), + ('Revision', c_uint8) ] class EFI_FIRMWARE_VOLUME_EXT_HEADER(Structure): _fields_ = [ - ('FvName', ARRAY(c_char, 16)), - ('ExtHeaderSize', c_uint32) + ('FvName', ARRAY(c_uint8, 16)), + ('ExtHeaderSize', c_uint32) ] class EFI_FFS_INTEGRITY_CHECK(Structure): _fields_ = [ - ('Header', c_uint8), - ('File', c_uint8) + ('Header', c_uint8), + ('File', c_uint8) ] class EFI_FFS_FILE_HEADER(Structure): _fields_ = [ - ('Name', ARRAY(c_char, 16)), - ('IntegrityCheck', EFI_FFS_INTEGRITY_CHECK), - ('Type', c_uint8), - ('Attributes', c_uint8), - ('Size', c_uint24), - ('State', c_uint8) + ('Name', ARRAY(c_uint8, 16)), + ('IntegrityCheck', EFI_FFS_INTEGRITY_CHECK), + ('Type', c_uint8), + ('Attributes', c_uint8), + ('Size', c_uint24), + ('State', c_uint8) ] class EFI_COMMON_SECTION_HEADER(Structure): _fields_ = [ - ('Size', c_uint24), - ('Type', c_uint8) + ('Size', c_uint24), + ('Type', c_uint8) + ] + +class FSP_COMMON_HEADER(Structure): + _fields_ = [ + ('Signature', ARRAY(c_char, 4)), + ('HeaderLength', c_uint32) ] class FSP_INFORMATION_HEADER(Structure): _fields_ = [ - ('Signature', c_uint32), - ('HeaderLength', c_uint32), - ('Reserved1', ARRAY(c_uint8, 3)), - ('HeaderRevision', c_uint8), - ('ImageRevision', c_uint32), - ('ImageId', c_uint64), - ('ImageSize', c_uint32), - ('ImageBase', c_uint32), - ('ImageAttribute', c_uint32), - ('CfgRegionOffset', c_uint32), - ('CfgRegionSize', c_uint32), - ('ApiEntryNum', c_uint32), - ('NemInitEntry', c_uint32), - ('FspInitEntry', c_uint32), - ('NotifyPhaseEntry', c_uint32), - ('FspMemoryInitEntry', c_uint32), - ('TempRamExitEntry', c_uint32), - ('FspSiliconInitEntry', c_uint32) + ('Signature', ARRAY(c_char, 4)), + ('HeaderLength', c_uint32), + ('Reserved1', c_uint16), + ('SpecVersion', c_uint8), + ('HeaderRevision', c_uint8), + ('ImageRevision', c_uint32), + ('ImageId', ARRAY(c_char, 8)), + ('ImageSize', c_uint32), + ('ImageBase', c_uint32), + ('ImageAttribute', c_uint16), + ('ComponentAttribute', c_uint16), + ('CfgRegionOffset', c_uint32), + ('CfgRegionSize', c_uint32), + ('Reserved2', c_uint32), + ('TempRamInitEntryOffset', c_uint32), + ('Reserved3', c_uint32), + ('NotifyPhaseEntryOffset', c_uint32), + ('FspMemoryInitEntryOffset', c_uint32), + ('TempRamExitEntryOffset', c_uint32), + ('FspSiliconInitEntryOffset', c_uint32) ] -class FspFv: - HeaderFile = """/* - * - * Automatically generated file; DO NOT EDIT. - * FSP mapping file - * - */ -""" - FspNameDict = { - "0" : "-C.Fv", - "1" : "-T.Fv", - "2" : "-M.Fv", - "3" : "-S.Fv", - } - - def __init__(self, FvBin): - self.FspFv = {} - self.FvList = [] - self.FspBin = FvBin - hfsp = open (self.FspBin, 'r+b') - self.FspDat = bytearray(hfsp.read()) - hfsp.close() +class FSP_PATCH_TABLE(Structure): + _fields_ = [ + ('Signature', ARRAY(c_char, 4)), + ('HeaderLength', c_uint16), + ('HeaderRevision', c_uint8), + ('Reserved', c_uint8), + ('PatchEntryNum', c_uint32) + ] + +class EFI_IMAGE_DATA_DIRECTORY(Structure): + _fields_ = [ + ('VirtualAddress', c_uint32), + ('Size', c_uint32) + ] + +class EFI_TE_IMAGE_HEADER(Structure): + _fields_ = [ + ('Signature', ARRAY(c_char, 2)), + ('Machine', c_uint16), + ('NumberOfSections', c_uint8), + ('Subsystem', c_uint8), + ('StrippedSize', c_uint16), + ('AddressOfEntryPoint', c_uint32), + ('BaseOfCode', c_uint32), + ('ImageBase', c_uint64), + ('DataDirectoryBaseReloc', EFI_IMAGE_DATA_DIRECTORY), + ('DataDirectoryDebug', EFI_IMAGE_DATA_DIRECTORY) + ] + +class PE_RELOC_BLOCK_HEADER(Structure): + _fields_ = [ + ('PageRVA', c_uint32), + ('BlockSize', c_uint32) + ] - def OutputStruct (self, obj, indent = 0): - max_key_len = 20 - pstr = (' ' * indent + '{0:<%d} = {1}\n') % max_key_len - if indent: - s = '' +class EFI_FV_FILETYPE: + ALL = 0x00 + RAW = 0x01 + FREEFORM = 0x02 + SECURITY_CORE = 0x03 + PEI_CORE = 0x04 + DXE_CORE = 0x05 + PEIM = 0x06 + DRIVER = 0x07 + COMBINED_PEIM_DRIVER = 0x08 + APPLICATION = 0x09 + SMM = 0x0a + FIRMWARE_VOLUME_IMAGE = 0x0b + COMBINED_SMM_DXE = 0x0c + SMM_CORE = 0x0d + OEM_MIN = 0xc0 + OEM_MAX = 0xdf + DEBUG_MIN = 0xe0 + DEBUG_MAX = 0xef + FFS_MIN = 0xf0 + FFS_MAX = 0xff + FFS_PAD = 0xf0 + +class EFI_SECTION_TYPE: + """Enumeration of all valid firmware file section types.""" + ALL = 0x00 + COMPRESSION = 0x01 + GUID_DEFINED = 0x02 + DISPOSABLE = 0x03 + PE32 = 0x10 + PIC = 0x11 + TE = 0x12 + DXE_DEPEX = 0x13 + VERSION = 0x14 + USER_INTERFACE = 0x15 + COMPATIBILITY16 = 0x16 + FIRMWARE_VOLUME_IMAGE = 0x17 + FREEFORM_SUBTYPE_GUID = 0x18 + RAW = 0x19 + PEI_DEPEX = 0x1b + SMM_DEPEX = 0x1c + +def AlignPtr (offset, alignment = 8): + return (offset + alignment - 1) & ~(alignment - 1) + +def Bytes2Val (bytes): + return reduce(lambda x,y: (x<<8)|y, bytes[::-1] ) + +def Val2Bytes (value, blen): + return [(value>>(i*8) & 0xff) for i in range(blen)] + +def OutputStruct (obj, indent = 0, plen = 0): + if indent: + body = '' + else: + body = (' ' * indent + '<%s>:\n') % obj.__class__.__name__ + + if plen == 0: + plen = sizeof(obj) + + max_key_len = 26 + pstr = (' ' * (indent + 1) + '{0:<%d} = {1}\n') % max_key_len + + for field in obj._fields_: + key = field[0] + val = getattr(obj, key) + rep = '' + if not isinstance(val, c_uint24) and isinstance(val, Structure): + body += pstr.format(key, val.__class__.__name__) + body += OutputStruct (val, indent + 1) + plen -= sizeof(val) else: - s = (' ' * indent + '<%s>:\n') % obj.__class__.__name__ - for field in obj._fields_: - key = field[0] - val = getattr(obj, key) - rep = '' - - if not isinstance(val, c_uint24) and isinstance(val, Structure): - s += pstr.format(key, val.__class__.__name__) - s += self.OutputStruct (val, indent + 1) - else: - if type(val) in (int, long): - rep = hex(val) - elif isinstance(val, str) and (len(val) == 16): - rep = str(uuid.UUID(bytes = val)) - elif isinstance(val, c_uint24): - rep = hex(val.get_value()) - elif 'c_ubyte_Array' in str(type(val)): - rep = str(list(bytearray(val))) + if type(val) is str: + rep = "0x%X ('%s')" % (Bytes2Val(bytearray(val)), val) + elif type(val) in (int, long): + rep = '0x%X' % val + elif isinstance(val, c_uint24): + rep = '0x%X' % val.get_value() + elif 'c_ubyte_Array' in str(type(val)): + if sizeof(val) == 16: + rep = str(uuid.UUID(bytes = str(bytearray(val)))).upper() else: - rep = str(val) - s += pstr.format(key, rep) - return s - - def PrintFv (self): - print ("FV LIST:") - idx = 0 - for (fvh, fvhe, offset) in self.FvList: - guid = uuid.UUID(bytes = fvhe.FvName) - print ("FV%d FV GUID:%s Offset:0x%08X Length:0x%08X" % (idx, str(guid), offset, fvh.FvLength)) - idx = idx + 1 - print ("\nFSP LIST:") - for fsp in self.FspFv: - print "FSP%s contains FV%s" % (fsp, str(self.FspFv[fsp][1])) - print "\nFSP%s Info Header:" % fsp - fih = self.FspFv[fsp][0] - - def AlaignPtr (self, offset, alignment = 8): - return (offset + alignment - 1) & ~(alignment - 1) - - def GetFspInfoHdr (self, fvh, fvhe, fvoffset): - if fvhe: - offset = fvh.ExtHeaderOffset + fvhe.ExtHeaderSize + res = ['0x%02X'%i for i in bytearray(val)] + rep = '[%s]' % (','.join(res)) + else: + rep = str(val) + plen -= sizeof(field[1]) + body += pstr.format(key, rep) + if plen <= 0: + break + return body + +class Section: + def __init__(self, offset, secdata): + self.SecHdr = EFI_COMMON_SECTION_HEADER.from_buffer (secdata, 0) + self.SecData = secdata[0:int(self.SecHdr.Size)] + self.Offset = offset + +class FirmwareFile: + def __init__(self, offset, filedata): + self.FfsHdr = EFI_FFS_FILE_HEADER.from_buffer (filedata, 0) + self.FfsData = filedata[0:int(self.FfsHdr.Size)] + self.Offset = offset + self.SecList = [] + + def ParseFfs(self): + ffssize = len(self.FfsData) + offset = sizeof(self.FfsHdr) + if self.FfsHdr.Name != '\xff' * 16: + while offset < ffssize: + sechdr = EFI_COMMON_SECTION_HEADER.from_buffer (self.FfsData, offset) + sec = Section (offset, self.FfsData[offset:offset + int(sechdr.Size)]) + self.SecList.append(sec) + offset += int(sechdr.Size) + offset = AlignPtr(offset, 4) + +class FirmwareVolume: + def __init__(self, offset, fvdata): + self.FvHdr = EFI_FIRMWARE_VOLUME_HEADER.from_buffer (fvdata, 0) + self.FvData = fvdata[0 : self.FvHdr.FvLength] + self.Offset = offset + if self.FvHdr.ExtHeaderOffset > 0: + self.FvExtHdr = EFI_FIRMWARE_VOLUME_EXT_HEADER.from_buffer (self.FvData, self.FvHdr.ExtHeaderOffset) else: - offset = fvh.HeaderLength - offset = self.AlaignPtr(offset) - - # Now it should be 1st FFS - ffs = EFI_FFS_FILE_HEADER.from_buffer (self.FspDat, offset) - offset += sizeof(ffs) - offset = self.AlaignPtr(offset) - - # Now it should be 1st Section - sec = EFI_COMMON_SECTION_HEADER.from_buffer (self.FspDat, offset) - offset += sizeof(sec) - - # Now it should be FSP_INFO_HEADER - offset += fvoffset - fih = FSP_INFORMATION_HEADER.from_buffer (self.FspDat, offset) - if 'FSPH' != bytearray.fromhex('%08X' % fih.Signature)[::-1]: - return None - - return fih - - def GetFvHdr (self, offset): - fvh = EFI_FIRMWARE_VOLUME_HEADER.from_buffer (self.FspDat, offset) - if '_FVH' != bytearray.fromhex('%08X' % fvh.Signature)[::-1]: - return None, None - if fvh.ExtHeaderOffset > 0: - offset += fvh.ExtHeaderOffset - fvhe = EFI_FIRMWARE_VOLUME_EXT_HEADER.from_buffer (self.FspDat, offset) + self.FvExtHdr = None + self.FfsList = [] + + def ParseFv(self): + fvsize = len(self.FvData) + if self.FvExtHdr: + offset = self.FvHdr.ExtHeaderOffset + self.FvExtHdr.ExtHeaderSize else: - fvhe = None - return fvh, fvhe + offset = self.FvHdr.HeaderLength + offset = AlignPtr(offset) + while offset < fvsize: + ffshdr = EFI_FFS_FILE_HEADER.from_buffer (self.FvData, offset) + if (ffshdr.Name == '\xff' * 16) and (int(ffshdr.Size) == 0xFFFFFF): + offset = fvsize + else: + ffs = FirmwareFile (offset, self.FvData[offset:offset + int(ffshdr.Size)]) + ffs.ParseFfs() + self.FfsList.append(ffs) + offset += int(ffshdr.Size) + offset = AlignPtr(offset) + +class FspImage: + def __init__(self, offset, fih, fihoff, patch): + self.Fih = fih + self.FihOffset = fihoff + self.Offset = offset + self.FvIdxList = [] + self.Type = "XTMSXXXXOXXXXXXX"[(fih.ComponentAttribute >> 12) & 0x0F] + self.PatchList = patch + self.PatchList.append(fihoff + 0x1C) + + def AppendFv(self, FvIdx): + self.FvIdxList.append(FvIdx) + + def Patch(self, delta, fdbin): + count = 0 + applied = 0 + for idx, patch in enumerate(self.PatchList): + ptype = (patch>>24) & 0x0F + if ptype not in [0x00, 0x0F]: + raise Exception('ERROR: Invalid patch type %d !' % ptype) + if patch & 0x80000000: + patch = self.Fih.ImageSize - (0x1000000 - (patch & 0xFFFFFF)) + else: + patch = patch & 0xFFFFFF + if (patch < self.Fih.ImageSize) and (patch + sizeof(c_uint32) <= self.Fih.ImageSize): + offset = patch + self.Offset + value = Bytes2Val(fdbin[offset:offset+sizeof(c_uint32)]) + value += delta + fdbin[offset:offset+sizeof(c_uint32)] = Val2Bytes(value, sizeof(c_uint32)) + applied += 1 + count += 1 + # Don't count the FSP base address patch entry appended at the end + if count != 0: + count -= 1 + applied -= 1 + return (count, applied) + +class FirmwareDevice: + def __init__(self, offset, fdfile): + self.FvList = [] + self.FspList = [] + self.FdFile = fdfile + self.Offset = 0 + hfsp = open (self.FdFile, 'rb') + self.FdData = bytearray(hfsp.read()) + hfsp.close() - def GetFvData(self, idx): - (fvh, fvhe, offset) = self.FvList[idx] - return self.FspDat[offset:offset+fvh.FvLength] + def ParseFd(self): + offset = 0 + fdsize = len(self.FdData) + self.FvList = [] + while offset < fdsize: + fvh = EFI_FIRMWARE_VOLUME_HEADER.from_buffer (self.FdData, offset) + if '_FVH' != fvh.Signature: + raise Exception("ERROR: Invalid FV header !") + fv = FirmwareVolume (offset, self.FdData[offset:offset + fvh.FvLength]) + fv.ParseFv () + self.FvList.append(fv) + offset += fv.FvHdr.FvLength def CheckFsp (self): - if len(self.FspFv) == 0: + if len(self.FspList) == 0: return fih = None - for fv in self.FspFv: + for fsp in self.FspList: + if fsp.Fih.HeaderRevision < 3: + raise Exception("ERROR: FSP 1.x is not supported by this tool !") if not fih: - fih = self.FspFv[fv][0] + fih = fsp.Fih else: - newfih = self.FspFv[fv][0] + newfih = fsp.Fih if (newfih.ImageId != fih.ImageId) or (newfih.ImageRevision != fih.ImageRevision): - raise Exception("Inconsistent FSP ImageId or ImageRevision detected !") - return + raise Exception("ERROR: Inconsistent FSP ImageId or ImageRevision detected !") + + def ParseFsp(self): + flen = 0 + for idx, fv in enumerate(self.FvList): + # Check if this FV contains FSP header + if flen == 0: + if len(fv.FfsList) == 0: + continue + ffs = fv.FfsList[0] + if len(ffs.SecList) == 0: + continue + sec = ffs.SecList[0] + if sec.SecHdr.Type != EFI_SECTION_TYPE.RAW: + continue + fihoffset = ffs.Offset + sec.Offset + sizeof(sec.SecHdr) + fspoffset = fv.Offset + offset = fspoffset + fihoffset + fih = FSP_INFORMATION_HEADER.from_buffer (self.FdData, offset) + if 'FSPH' != fih.Signature: + continue + + offset += fih.HeaderLength + offset = AlignPtr(offset, 4) + plist = [] + while True: + fch = FSP_COMMON_HEADER.from_buffer (self.FdData, offset) + if 'FSPP' != fch.Signature: + offset += fch.HeaderLength + offset = AlignPtr(offset, 4) + else: + fspp = FSP_PATCH_TABLE.from_buffer (self.FdData, offset) + offset += sizeof(fspp) + pdata = (c_uint32 * fspp.PatchEntryNum).from_buffer(self.FdData, offset) + plist = list(pdata) + break + + fsp = FspImage (fspoffset, fih, fihoffset, plist) + fsp.AppendFv (idx) + self.FspList.append(fsp) + flen = fsp.Fih.ImageSize - fv.FvHdr.FvLength + else: + fsp.AppendFv (idx) + flen -= fv.FvHdr.FvLength + if flen < 0: + raise Exception("ERROR: Incorrect FV size in image !") + self.CheckFsp () + +class TeImage: + def __init__(self, offset, tedata): + self.Offset = offset + self.TeHdr = EFI_TE_IMAGE_HEADER.from_buffer (tedata, 0) + self.TeData = tedata + self.RelocList = [] + + def ParseReloc(self): + rsize = self.TeHdr.DataDirectoryBaseReloc.Size + roffset = sizeof(self.TeHdr) - self.TeHdr.StrippedSize + self.TeHdr.DataDirectoryBaseReloc.VirtualAddress + alignment = 4 + offset = roffset + while offset < roffset + rsize: + offset = AlignPtr(offset, 4) + blkhdr = PE_RELOC_BLOCK_HEADER.from_buffer(self.TeData, offset) + offset += sizeof(blkhdr) + # Read relocation type,offset pairs + rlen = blkhdr.BlockSize - sizeof(PE_RELOC_BLOCK_HEADER) + rnum = rlen/sizeof(c_uint16) + rdata = (c_uint16 * rnum).from_buffer(self.TeData, offset) + for each in rdata: + roff = each & 0xfff + rtype = each >> 12 + if rtype == 0: # IMAGE_REL_BASED.ABSOLUTE: + continue + if rtype != 3: # IMAGE_REL_BASED_HIGHLOW + raise Exception("ERROR: Unsupported relocation type %d!" % rtype) + # Calculate the offset of the relocation + aoff = sizeof(self.TeHdr) - self.TeHdr.StrippedSize + blkhdr.PageRVA + roff + self.RelocList.append((rtype, aoff)) + offset += sizeof(rdata) + + def Rebase(self, delta, fdbin): + count = 0 + if delta == 0: + return count + + for (rtype, roff) in self.RelocList: + if rtype == 0x03: # HIGHLOW + offset = roff + self.Offset + value = Bytes2Val(fdbin[offset:offset+sizeof(c_uint32)]) + value += delta + fdbin[offset:offset+sizeof(c_uint32)] = Val2Bytes(value, sizeof(c_uint32)) + count += 1 + else: + raise Exception('ERROR: Unknown relocation type %d !' % rtype) + + tehdr = self.TeHdr + tehdr.ImageBase += delta + offset = self.Offset + fdbin[offset:offset+sizeof(tehdr)] = bytearray(tehdr) + + return count - def WriteFsp(self, dir, name): +def ShowFspInfo (fspfile): + fd = FirmwareDevice(0, fspfile) + fd.ParseFd () + fd.ParseFsp () + + print ("\nFound the following %d Firmware Volumes in FSP binary:" % (len(fd.FvList))) + for idx, fv in enumerate(fd.FvList): + name = fv.FvExtHdr.FvName if not name: - name = self.FspBin - fspname, ext = os.path.splitext(os.path.basename(name)) - for fv in self.FspFv: - filename = os.path.join(dir, fspname + fv + ext) - hfsp = open(filename, 'w+b') - for fvidx in self.FspFv[fv][1]: - hfsp.write (self.GetFvData(fvidx)) - hfsp.close() - - def WriteMap(self, dir, hfile): - if not hfile: - hfile = os.path.splitext(os.path.basename(self.FspBin))[0] + '.h' - fspname, ext = os.path.splitext(os.path.basename(hfile)) - filename = os.path.join(dir, fspname + ext) - hfsp = open(filename, 'w') - hfsp.write ('%s\n\n' % self.HeaderFile) - - firstfv = True - for fsp in self.FspFv: - fih = self.FspFv[fsp][0] - fvs = self.FspFv[fsp][1] - if firstfv: - IdStr = str(bytearray.fromhex('%016X' % fih.ImageId)[::-1]) - hfsp.write("#define FSP_IMAGE_ID 0x%016X /* '%s' */\n" % (fih.ImageId, IdStr)) - hfsp.write("#define FSP_IMAGE_REV 0x%08X \n\n" % fih.ImageRevision) - firstfv = False - hfsp.write ('#define FSP%s_BASE 0x%08X\n' % (fsp, fih.ImageBase)) - hfsp.write ('#define FSP%s_OFFSET 0x%08X\n' % (fsp, self.FvList[fvs[0]][-1])) - hfsp.write ('#define FSP%s_LENGTH 0x%08X\n\n' % (fsp, fih.ImageSize)) + name = '\xff' * 16 + else: + name = str(bytearray(name)) + guid = uuid.UUID(bytes = name) + print ("FV%d:" % idx) + print (" GUID : %s" % str(guid).upper()) + print (" Offset : 0x%08X" % fv.Offset) + print (" Length : 0x%08X" % fv.FvHdr.FvLength) + print ("\n") + + for fsp in fd.FspList: + fvlist = map(lambda x : 'FV%d' % x, fsp.FvIdxList) + print ("FSP_%s contains %s" % (fsp.Type, ','.join(fvlist))) + print ("%s" % (OutputStruct(fsp.Fih, 0, fsp.Fih.HeaderLength))) + +def GenFspHdr (fspfile, outdir, hfile): + fd = FirmwareDevice(0, fspfile) + fd.ParseFd () + fd.ParseFsp () + + if not hfile: + hfile = os.path.splitext(os.path.basename(fspfile))[0] + '.h' + fspname, ext = os.path.splitext(os.path.basename(hfile)) + filename = os.path.join(outdir, fspname + ext) + hfsp = open(filename, 'w') + hfsp.write ('%s\n\n' % CopyRightHeaderFile) + + firstfv = True + for fsp in fd.FspList: + fih = fsp.Fih + if firstfv: + hfsp.write("#define FSP_IMAGE_ID 0x%016X /* '%s' */\n" % (Bytes2Val(bytearray(fih.ImageId)), fih.ImageId)) + hfsp.write("#define FSP_IMAGE_REV 0x%08X \n\n" % fih.ImageRevision) + firstfv = False + fv = fd.FvList[fsp.FvIdxList[0]] + hfsp.write ('#define FSP%s_BASE 0x%08X\n' % (fsp.Type, fih.ImageBase)) + hfsp.write ('#define FSP%s_OFFSET 0x%08X\n' % (fsp.Type, fv.Offset)) + hfsp.write ('#define FSP%s_LENGTH 0x%08X\n\n' % (fsp.Type, fih.ImageSize)) + + hfsp.close() + +def SplitFspBin (fspfile, outdir, nametemplate): + fd = FirmwareDevice(0, fspfile) + fd.ParseFd () + fd.ParseFsp () + + for fsp in fd.FspList: + ftype = fsp.Type + if not nametemplate: + nametemplate = fspfile + fspname, ext = os.path.splitext(os.path.basename(nametemplate)) + filename = os.path.join(outdir, fspname + '_' + fsp.Type + ext) + hfsp = open(filename, 'wb') + print ("Ceate FSP component file '%s'" % filename) + for fvidx in fsp.FvIdxList: + fv = fd.FvList[fvidx] + hfsp.write(fv.FvData) hfsp.close() - def ParseFsp (self): - self.FspFv = {} - flen = 0 - for (fvh, fvhe, offset) in self.FvList: - fih = self.GetFspInfoHdr (fvh, fvhe, offset) - if fih: - if flen != 0: - raise Exception("Incorrect FV size in image !") - ftype = str((fih.ImageAttribute >> 28) & 0xF) - if ftype not in self.FspNameDict: - raise Exception("Unknown Attribute in image !") - fname = self.FspNameDict[str(ftype)] - if fname in self.FspFv: - raise Exception("Multiple '%s' in image !" % fname) - self.FspFv[fname] = (copy.deepcopy(fih), []) - flen = fih.ImageSize - if flen > 0: - flen = flen - fvh.FvLength - if flen < 0: - raise Exception("Incorrect FV size in image !") - self.FspFv[fname][1].append(self.FvList.index((fvh, fvhe, offset))) +def RebaseFspBin (FspBinary, FspComponent, FspBase, OutputDir, OutputFile): + fd = FirmwareDevice(0, FspBinary) + fd.ParseFd () + fd.ParseFsp () - def AddFv(self, offset): - fvh, fvhe = self.GetFvHdr (offset) - if fvh is None: - raise Exception('FV signature is not valid !') - fvitem = (copy.deepcopy(fvh), copy.deepcopy(fvhe), offset) - self.FvList.append(fvitem) - return fvh.FvLength + numcomp = len(FspComponent) + baselist = FspBase + if numcomp != len(baselist): + print "ERROR: Required number of base does not match number of FSP component !" + return - def ParseFv(self): - offset = 0 - while (offset < len(self.FspDat)): - fv_len = self.AddFv (offset) - offset += fv_len - -def GenFspHdr (fspfile, outdir, hfile, show): - fsp_fv = FspFv(fspfile) - fsp_fv.ParseFv() - fsp_fv.ParseFsp() - fsp_fv.CheckFsp() - if show: - fsp_fv.PrintFv() - fsp_fv.WriteMap(outdir, hfile) - -def SplitFspBin (fspfile, outdir, nametemplate, show): - fsp_fv = FspFv(fspfile) - fsp_fv.ParseFv() - fsp_fv.ParseFsp() - if show: - fsp_fv.PrintFv() - fsp_fv.WriteFsp(outdir, nametemplate) + newfspbin = fd.FdData[:] + + for idx, fspcomp in enumerate(FspComponent): + + found = False + for fsp in fd.FspList: + ftype = fsp.Type.lower() + if ftype == fspcomp: + found = True + break + + if not found: + print "ERROR: Could not find FSP_%c component to rebase !" % fspcomp.upper() + return + + fspbase = baselist[idx] + if fspbase.startswith('0x'): + newbase = int(fspbase, 16) + else: + newbase = int(fspbase) + oldbase = fsp.Fih.ImageBase + delta = newbase - oldbase + print "Rebase FSP-%c from 0x%08X to 0x%08X:" % (ftype.upper(),oldbase,newbase) + + telist = [] + for fvidx in fsp.FvIdxList: + fv = fd.FvList[fvidx] + for ffs in fv.FfsList: + for sec in ffs.SecList: + if sec.SecHdr.Type == EFI_SECTION_TYPE.TE: # TE + offset = fd.Offset + fv.Offset + ffs.Offset + sec.Offset + sizeof(sec.SecHdr) + telist.append ((offset, len(sec.SecData) - sizeof(sec.SecHdr))) + elif sec.SecHdr.Type == EFI_SECTION_TYPE.PE32: # PE + raise Exception("ERROR: PE32 Section is not supported !") + + fcount = 0 + tecount = 0 + for (teoffset, telen) in telist: + tehdr = EFI_TE_IMAGE_HEADER.from_buffer (fd.FdData, teoffset) + if 'VZ' != tehdr.Signature: + raise Exception("ERROR: Invalid TE header !") + te = TeImage(teoffset, fd.FdData[teoffset:teoffset + telen]) + te.ParseReloc() + tecount += te.Rebase(delta, newfspbin) + fcount += 1 + print " Patched %d entries in %d TE images." % (tecount, fcount) + + (count, applied) = fsp.Patch(delta, newfspbin) + print " Patched %d entries using FSP patch table." % applied + if count != applied: + print " %d invalid entries are ignored !" % (count - applied) + + if OutputFile == '': + filename = os.path.basename(FspBinary) + base, ext = os.path.splitext(filename) + OutputFile = base + "_%08X" % newbase + ext + + fspname, ext = os.path.splitext(os.path.basename(OutputFile)) + filename = os.path.join(OutputDir, fspname + ext) + fd = open(filename, "wb") + fd.write(newfspbin) + fd.close() def main (): - parser = argparse.ArgumentParser() - subparsers = parser.add_subparsers(title='commands') + parser = argparse.ArgumentParser() + subparsers = parser.add_subparsers(title='commands') + + parser_rebase = subparsers.add_parser('rebase', help='rebase a FSP into a new base address') + parser_rebase.set_defaults(which='rebase') + parser_rebase.add_argument('-f', '--fspbin' , dest='FspBinary', type=str, help='FSP binary file path', required = True) + parser_rebase.add_argument('-c', '--fspcomp', choices=['t','m','s','o'], nargs='+', dest='FspComponent', type=str, help='FSP component to rebase', default = "['t']", required = True) + parser_rebase.add_argument('-b', '--newbase', dest='FspBase', nargs='+', type=str, help='Rebased FSP binary file name', default = '', required = True) + parser_rebase.add_argument('-o', '--outdir' , dest='OutputDir', type=str, help='Output directory path', default = '.') + parser_rebase.add_argument('-n', '--outfile', dest='OutputFile', type=str, help='Rebased FSP binary file name', default = '') parser_split = subparsers.add_parser('split', help='split a FSP into multiple components') parser_split.set_defaults(which='split') parser_split.add_argument('-f', '--fspbin' , dest='FspBinary', type=str, help='FSP binary file path', required = True) parser_split.add_argument('-o', '--outdir' , dest='OutputDir', type=str, help='Output directory path', default = '.') parser_split.add_argument('-n', '--nametpl', dest='NameTemplate', type=str, help='Output name template', default = '') - parser_split.add_argument('-p', action='store_true', help='Print FSP FV information', default = False) parser_genhdr = subparsers.add_parser('genhdr', help='generate a header file for FSP binary') parser_genhdr.set_defaults(which='genhdr') parser_genhdr.add_argument('-f', '--fspbin' , dest='FspBinary', type=str, help='FSP binary file path', required = True) parser_genhdr.add_argument('-o', '--outdir' , dest='OutputDir', type=str, help='Output directory path', default = '.') parser_genhdr.add_argument('-n', '--hfile', dest='HFileName', type=str, help='Output header file name', default = '') - parser_genhdr.add_argument('-p', action='store_true', help='Print FSP FV information', default = False) + + parser_info = subparsers.add_parser('info', help='display FSP information') + parser_info.set_defaults(which='info') + parser_info.add_argument('-f', '--fspbin' , dest='FspBinary', type=str, help='FSP binary file path', required = True) args = parser.parse_args() - if args.which in ['split', 'genhdr']: + if args.which in ['rebase', 'split', 'genhdr', 'info']: if not os.path.exists(args.FspBinary): - raise Exception ("Could not locate FSP binary file '%s' !" % args.FspBinary) - if not os.path.exists(args.OutputDir): - raise Exception ("Invalid output directory '%s' !" % args.OutputDir) - - if args.which == 'split': - SplitFspBin (args.FspBinary, args.OutputDir, args.NameTemplate, args.p) + raise Exception ("ERROR: Could not locate FSP binary file '%s' !" % args.FspBinary) + if hasattr(args, 'OutputDir') and not os.path.exists(args.OutputDir): + raise Exception ("ERROR: Invalid output directory '%s' !" % args.OutputDir) + + if args.which == 'rebase': + RebaseFspBin (args.FspBinary, args.FspComponent, args.FspBase, args.OutputDir, args.OutputFile) + elif args.which == 'split': + SplitFspBin (args.FspBinary, args.OutputDir, args.NameTemplate) elif args.which == 'genhdr': - GenFspHdr (args.FspBinary, args.OutputDir, args.HFileName, args.p) + GenFspHdr (args.FspBinary, args.OutputDir, args.HFileName) + elif args.which == 'info': + ShowFspInfo (args.FspBinary) else: pass - print 'Done!' return 0 if __name__ == '__main__': -- 2.39.2